PRICE LIST 2018 E5.16 FITTINGS AND VALVES
Since 1954 FIP produces injection moulded valves and fittings in thermoplastic materials for pressure pipeline systems thus becoming nowadays the largest European valves manufacturer. FIP is a company of the Aliaxis Group: a worldwide industrial holding, gathering together a series of companies manufacturing and marketing plastic plumbing products for building, industrial and public utilities applications. FIP products are manufactured on EU production sites, operating to the Quality Assurance System in compliance with ISO 9001 and with the Environmental Management System ISO 14001 standards requirements. Moulded in FIP products there are over 50 years of know-how powered by a strong quest for innovation. Product manager PVC-U Manual & Actuated valves - Lucia Cambiaso Tel. +39 010 9621 266 PVC-C Manual & Actuated valves - Mauro Nobile Tel. +39 010 9621 414 & PVDF Manual & Actuated valves- Silvia Porcile Tel. +39 010 9621 267 FLS Instrumentation and Variable area flowmeters - Alberto Claveri Tel. +39 010 9621 340 PVC-U & PVC-C fittings - Mauro Nobile Tel. +39 010 9621 414 PE, & PVDF fittings - Silvia Porcile Tel. +39 010 9621 267 PP Compression fittings MAGNUM System & Clamp saddles - Stefano Carrea Technical Support Tel. +39 010 9621 255 technical.fip@aliaxis.com Company Certificates Cert. N 1 in compliance with the Standard UNI EN ISO 9001 Cert. N 70 in compliance with the Standard UNI EN ISO 14001 CE Conformity CE conformity according to European directives EC/2104/68. R00-02-2018 2
CONTENTS General info How to read FIP Valves Commercial Codes page 4 How to read FIP Fittings Commercial Codes page 6 Fittings and Valves - E5.16 Reference standards page 8 Approvals and quality marks page 10 ISO-UNI FITTINGS Fittings for socket welding - Equal socket Fittings for socket welding - Caps Fittings for socket welding - Unions Fittings for socket welding - Reducers Fittings for socket welding - Stubs Fittings for socket welding - Hose adaptor Flanges - ISO-DIN series Flanges - ANSI series ISO-BSP FITTINGS Adaptor for socket welding Adaptor for socket welding - Unions Adaptor for socket welding - Brass Union Ends Adaptor for socket welding - SS A316L Union Ends BALL VALVES VKD DN 10 50 - DUAL BLOCK 2-way ball valve VKD DN 65 100 - DUAL BLOCK 2-way ball valve VKR DN 10 50 - DUAL BLOCK regulating ball valve TKD DN 10 50 - DUAL BLOCK 3-way ball valve SR DN 15 50 - Ball check valve BUTTERFLY VALVES page 12 page 14 page 15 page 17 page 18 page 19 page 20 page 21 page 23 page 24 page 26 page 27 page 28 page 33 page 37 page 42 page 46 FK DN 40 400 - Butterfly valve page 48 DIAPHRAGM VALVES DK DN 15 65 - DIALOCK 2-way diaphragm valve VM DN 80 100 - Diaphragm valve CM DN 12 15 - Compact diaphragm valve OTHER VALVES RV DN 15 100 - Sediment strainer VR DN 15 80 - Check valve CONNECTIONS Connections for ball and angle seat valves Spare end connectors for true union diaphragm valves page 55 page 60 page 63 page 67 page 69 page 71 page 75 FITTINGS AND VALVES Packaging Information Conditions of supply page 77 page 78 3
CODES HOW TO READ FIP VALVES COMMERCIAL CODES Ex: FKOCRM315F FK butterfly valve, PVC-C disc, gear, d 315, gasket FK VALVE MODEL O CONNECTION STD. C MATERIALS VKD ball 2-way DUAL BLOCK I ISO socket (metric) A ABS TKD ball 3-way DUAL BLOCK T D ISO spigot (metric) C PVC-C LKD portball 3-way DUAL BLOCK L B ISO butt welding (metric) F PVDF VKR regulating ball 2-way DUAL BLOCK BE PE100 ISO butt welding (metric) M VXE ball 2-way Easyfit G JIS socket threaded (metric) V PVC-U VEE ball 2-way Easyfit P Hose adaptor (metric) T PVC-U Transparent SXE ball spring check valve Easyfit F BSP female threaded (inch) FK butterfly multi-purpose R BSP male threaded (inch) FE butterfly water L BS female (inch) DK diaphragm DIALOCK M BS male (inch) VM diaphragm A ASTM socket (inch) CM compact diaphragm Y ASTM spigot (inch) CMU unionised compact diaphragm N NPT socket threaded (inch) DKD direct acting diaphragm (only pneumatically actuated) J JIS socket (inch) DKDU unionised direct acting diaphragm (only pneumatically actuated) O ISO-DIN flanged (metric) DKM diaphragm act. diaphragm OA ANSI 150 flanged (inch) DKP piston act. diaphragm (onlypneumatically actuated) OL LUG ISO-DIN (mm) flanged DKPU unionised piston actuator diaphragm (only pneumatically actuated) OAL LUG ANSI 150 (inch) flanged RM RP RV RVU VR VRU VV VVU SR VZ VA SV CR diaphragm cock piston cock strainer unionised strainer piston check valve unionised piston check valve angle seat valve unionised angle seat valve ball check valve foot valve air release valve pressure relief valve wafer check valve 4
RM COMMAND SYSTEM 315 SIZE METRIC SERIES d (mm) INCH SERIES d/r (inches) F SEAL MATERIAL SHX handle block (for VKD ball valves) 006 6 E LM lever (for butterfly) 008 8 F RM gear (for butterfly) 010 10 N NBR FM bare shaft (for butterfly) 012 12 014 1/4 P PTFE NC Pneumatic Normally Closed 016 16 038 3/8 NO Pneumatic Normally Open 020 20 012 1/2 DA Pneumatic Double Acting 025 25 034 3/4 SA Pneumatic Single Acting 032 32 100 1 EA Electric 230V AC 040 40 114 1 1/4 EB Electric 115V AC 050 50 112 1 1/2 EE Electric 24V AC 063 63 200 2 EF Electric 24V DC 214 2 1/4 EI Electric 400V trifase 075 75 212 2 1/2 EM Electric 90-240V AC 234 2 3/4 EL Electric 24V AC/DC 090 90 300 3 110 110 400 4 125 125 140 140 500 5 160 160 600 6 E5.16 180 180 200 200 225 225 800 8 250 250 280 280 810 10 315 315 812 12 355 355 814 14 400 400 816 16 5
CODES HOW TO READ FIP FITTINGS COMMERCIAL CODES Ex: BIV050E PVC-U union, d50, socket for solvent welding, gasket B TYPE OF FITTINGS I JOINT SYSTEM V MATERIALS A Hose connector C Cieco C PVC-C B Socket union F BSP female threaded (inch) E PE C End cap G JIS socket threaded (inch) F PVDF D Reducer bush I ISO socket (metric) M E Nut M BS male (inch) V PVC-U F Fixed flange P Hose adaptor (metric) B PP-steel F/B Union bush R BSP male threaded (inch) O Brass G 90 elbow B ISO butt welding (metric) H 45 elbow D ISO spigot (metric) J Back nut A ASTM socket (inch) K L M N NR O P Q Q/B R S T TR U Z Y X Transition fitting Tank connector Socket Nipple Reduced nipple Free flange Plug Collars Union end connector Reduction 90 bend 90 tee 90 tee with reduced offtake Clamp saddles Pipe clips 45 tee Cross 6
METRIC SERIES d (mm) 050 SIZE INCH SERIES d/r (pollici) 006 6 E 008 8 F 010 10 N NBR 012 12 014 1/4 P PTFE 016 16 038 3/8 020 20 012 1/2 025 25 034 3/4 032 32 100 1 040 40 114 1 1/4 050 50 112 1 1/2 063 63 200 2 214 2 1/4 075 75 212 2 1/2 234 2 3/4 090 90 300 3 E SEAL MATERIAL 110 110 400 4 125 125 140 140 500 5 160 160 600 6 E5.16 180 180 200 200 225 225 800 8 250 250 280 280 810 10 315 315 812 12 355 355 400 400 7
REFERENCE STANDARDS Production of the (100) lines is carried out according to the highest quality standards and in full compliance with the environmental restrictions set by the applicable laws in force and in accordance with ISO 14001. All products are made in accordance with the quality guarantee system in compliance with ISO 9001. ANSI B16.5 cl.150 Pipe, flanges and stubs - NPS 1/2 to NPS 24 mm / inch. ASTM D 4101-06 Polypropylene compound according to the classification PP0110B56000. BS 10 Specification for flanges and bolts for pipes, valves and fittings. BS 1560 Flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges. Specification for steel flanges. BS 4504 Flanges for pipes, valves and fittings (PN designated). DIN 2501 Flanges, dimensions. DIN 2999 Whitworth thread for threaded pipes and fittings. DIN 8077-8078 pipe dimensions, metric series. DIN 16962 fittings for socket and butt welding, dimensions. DIN 16963 Pipe joints and pipe components for pressurised fluids in HDPE. DVS 2202-1 Imperfections of welded joints, characteristics, descriptions and evaluations. DVS 2207-11 Socket and butt welding of components. DVS 2208-1 Machinery and equipment for thermocouple welding pipes, pipe parts and panels. EN 558-1 Industrial valves - Overall dimensions of metal valves for use in flanged pipe systems - Part 1: PN designated valves EN 1092-1 Flanges and their joints - Circular flanges for pipes, fittings, valves and accessories - Part 1: Steel flanges, PN designated. EN ISO 15494 Specifications for components (Pipes, Fittings and Valves) in for industrial applications. ISO 228-1 Pipe threads for connections that do not seal in the thread. ISO 5211 Part-turn actuator couplings. ISO 7005-1 Metal flanges; part 1: steel flanges. 8
JIS B 2220 Steel pipe flanges. UNI 11318 Socket welding of components. UNI 11397 Butt welding of components. E5.16 9
APPROVALS AND QUALITY MARKS DIBt FIP valves have been tested and certified by DIBt (Deutsches Institut für Bautechnik) GOST-R - EAC FIP valves are GOST-R and EAC certified in accordance with Russian regulations on Safety, Hygiene and Quality RINA FIP valves have been recongnised as suitable for conveying, treating domestic and air conditioning waters on board ships and other units classified by RINA. TA-Luft TA-Luft FIP valves have been tested and certified according to TA-Luft by MPA Stuttgart in compliance with the Technical Instruction on Air Quality Control TA-Luft/ VDI 2440 UKR SEPRO FIP valves and fittings are certified in accordance with Ukrainian regulations on Safety and Quality NIZP FIP PVC-U fittings have been recognised as suitable for conveying drinking water by the NIZP (National Institute of Public Health - Poland) 10
FITTINGS ISO-UNI Series of fittings designed for conveying fluids under pressure with a hot weld connection system (socket welding). FITTINGS FOR SOCKET WELDING Technical specifications Size range d 20 d 110 (mm) Nominal pressure PN 10 with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494. Can be coupled to pipes according to EN ISO 15494 Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, DIN 2501, ANSI B16.5 cl.150 Reference standards Construction criteria: EN ISO 15494 Test methods and requirements: EN ISO 15494 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318 Fitting material Seal material, E5.16 11
ISO-UNI FITTINGS FITTINGS FOR SOCKET WELDING - EQUAL SOCKET GIM Elbow 90 for socket welding Code Pack 20 15 10 GIM020 2,31 10 160 04 25 20 10 GIM025 2,71 10 160 04 32 25 10 GIM032 3,29 10 100 04 40 32 10 GIM040 4,18 5 50 04 50 40 10 GIM050 7,69 5 30 04 63 50 10 GIM063 10,00 2 16 04 75 65 10 GIM075 20,77-8 04 90 80 10 GIM090 25,54-6 04 110 100 10 GIM110 38,32-4 04 TIM Equal Tee 90 for socket welding Code Pack 20 15 10 TIM020 2,71 10 160 04 25 20 10 TIM025 3,01 10 100 04 32 25 10 TIM032 3,50 10 60 04 40 32 10 TIM040 4,50 5 40 04 50 40 10 TIM050 8,02 5 20 04 63 50 10 TIM063 10,23 2 20 03 75 65 10 TIM075 23,75-8 04 90 80 10 TIM090 38,32-8 03 110 100 10 TIM110 48,62-4 03 12
ISO-UNI FITTINGS FITTINGS FOR SOCKET WELDING - EQUAL SOCKET HIM Elbow 45 for socket welding Code Pack 20 15 10 HIM020 3,29 10 300 04 25 20 10 HIM025 3,50 10 160 04 32 25 10 HIM032 4,31 10 100 04 40 32 10 HIM040 5,98 5 60 04 50 40 10 HIM050 7,69 5 30 04 63 50 10 HIM063 10,23 2 16 04 75 65 10 HIM075 23,75-12 04 90 80 10 HIM090 32,76-6 04 110 100 10 HIM110 47,89-4 04 MIM Double socket, plain socket for socket welding Code Pack 20 15 10 MIM020 1,59 10 300 04 25 20 10 MIM025 1,83 10 240 04 32 25 10 MIM032 2,10 10 120 04 40 32 10 MIM040 2,53 5 90 04 50 40 10 MIM050 4,80 5 60 04 63 50 10 MIM063 7,30 2 32 04 75 65 10 MIM075 10,16-24 04 90 80 10 MIM090 14,52-12 04 110 100 10 MIM110 22,77-8 04 E5.16 13
ISO-UNI FITTINGS FITTINGS FOR SOCKET WELDING - CAPS CIM End cap for socket welding Code Pack 20 15 10 CIM020 2,10 10 300 04 25 20 10 CIM025 2,10 10 240 04 32 25 10 CIM032 2,59 10 120 04 40 32 10 CIM040 3,06 5 90 04 50 40 10 CIM050 4,38 5 45 04 63 50 10 CIM063 5,64 2 32 04 75 65 10 CIM075 10,34-24 04 90 80 10 CIM090 11,95-12 04 110 100 10 CIM110 16,55-8 04 14
ISO-UNI FITTINGS FITTINGS FOR SOCKET WELDING - UNIONS BIGM Socket union with plain end for socket welding or O-ring d DN R 1 PN Pack 20 15 1" 10 BIGM020E 9,03 BIGM020F 10,48 10 80 04 25 20 1"1/4 10 BIGM025E 10,00 BIGM025F 11,47 10 60 04 32 25 1"1/2 10 BIGM032E 11,47 BIGM032F 13,57 10 40 04 40 32 2" 10 BIGM040E 14,52 BIGM040F 18,18 2 32 04 50 40 2"1/4 10 BIGM050E 20,72 BIGM050F 25,54 2 24 04 63 50 2"3/4 10 BIGM063E 29,56 BIGM063F 35,21 2 12 04 EFGM PP-GR Union nut with BS parallel threads for BIGM, BIFGM, BIFOM, BIROM, BIFXM, BIRXM unions R d BIGM PN Code Pack 1" 20 10 EFGM100 4,36 - - - 1"1/4 25 10 EFGM114 4,51 - - - 1"1/2 32 10 EFGM112 5,22 - - - 2" 40 10 EFGM200 6,67 - - - 2"1/4 50 10 EFGM214 10,34 - - - 2"3/4 63 10 EFGM234 16,68 - - - E5.16 Q/BIGM Union end for socket welding Code Pack 20 15 10 QBIGM020 2,50 - - - 25 20 10 QBIGM025 2,53 - - - 32 25 10 QBIGM032 2,68 - - - 40 32 10 QBIGM040 3,32 - - - 50 40 10 QBIGM050 3,98 - - - 63 50 10 QBIGM063 4,23 - - - 15
ISO-UNI FITTINGS FITTINGS FOR SOCKET WELDING - UNIONS F/BIGM Union bush for socket welding d DN R 1 PN Code Pack 20 15 1" 10 FBIGM020 4,44 - - - 25 20 1"1/4 10 FBIGM025 4,87 - - - 32 25 1"1/2 10 FBIGM032 5,59 - - - 40 32 2" 10 FBIGM040 7,30 - - - 50 40 2"1/4 10 FBIGM050 10,35 - - - 63 50 2"3/4 10 FBIGM063 13,73 - - - 16
ISO-UNI FITTINGS FITTINGS FOR SOCKET WELDING - REDUCERS RIM Reducer: male spigot for socket welding (d) and female socket for socket welding (d1) d x d 1 PN Code Pack 25 x 20 10 RIM025020 2,24 10 240 04 32 x 20 10 RIM032020 2,71 10 160 04 32 x 25 10 RIM032025 2,71 10 160 04 40 x 25 10 RIM040025 3,23 10 100 04 40 x 32 10 RIM040032 3,23 10 100 04 50 x 32 10 RIM050032 4,18 5 80 04 50 x 40 10 RIM050040 4,09 5 80 04 63 x 32 10 RIM063032 4,87 5 40 04 63 x 50 10 RIM063050 5,00 5 40 04 75 x 50 10 RIM075050 8,92-24 04 75 x 63 10 RIM075063 8,92-24 04 90 x 63 10 RIM090063 12,44-24 04 90 x 75 10 RIM090075 12,22-24 04 110 x 63 10 RIM110063 17,04-10 04 110 x 90 10 RIM110090 17,60-6 04 E5.16 17
ISO-UNI FITTINGS FITTINGS FOR SOCKET WELDING - STUBS QRNM Stub Flange DIN for socket welding, with serrated face to be used with ODB Code Pack 20 15 10 QRNM020 3,86 10 360 04 25 20 10 QRNM025 4,03 10 180 04 32 25 10 QRNM032 4,36 10 100 04 40 32 10 QRNM040 5,37 5 70 04 50 40 10 QRNM050 6,28 5 100 03 63 50 10 QRNM063 7,80 2 30 04 75 65 10 QRNM075 16,86-24 04 90 80 10 QRNM090 26,62-12 04 110 110 10 QRNM110 36,85-12 04 QRAM Stub Flange for socket welding for OAB ANSI B16.5 cl.150 backing rings (for other dimensions, use QRNM) OAB size Code Pack 25 20 10 3/4" QRAM034 4,80 10 100 04 32 25 10 1" QRAM100 5,22 10 100 04 40 32 10 1"1/4 QRAM114 6,54 5 70 04 50 40 10 1"1/2 QRAM112 7,53 5 100 03 90 80 10 3" QRAM300 31,96-12 04 18
ISO-UNI FITTINGS FITTINGS FOR SOCKET WELDING - HOSE ADAPTOR AIM Hose adaptor, male spigot for socket welding d x P 2 x P 1 DN Code Pack 20 x 22 x 20 15 AIM020022020 2,36 10 300 04 25 x 27 x 25 20 AIM025027025 3,01 10 200 04 32 x 32 x 30 25 AIM032032030 3,65 10 120 04 40 x 42 x 40 32 AIM040042040 6,32 5 100 03 50 x 52 x 50 40 AIM050052050 7,88 5 20 04 63 x 64 x 60 50 AIM063064060 8,77 5 20 04 E5.16 19
ISO-UNI FITTINGS FLANGES - ISO-DIN SERIES ODB acking ring in PP/FRP black with steel core according to EN/ISO/DIN to be used with stub flange QRNM. Drilled: PN 16 up to DN 100 d DN *PMA (bar) Code Pack 20 15 16 ODB020 See EB price list - - - 25 20 16 ODB025 See EB price list - - - 32 25 16 ODB032 See EB price list - - - 40 32 16 ODB040 See EB price list - - - 50 40 16 ODB050 See EB price list - - - 63 50 16 ODB063 See EB price list - - - 75 65 16 ODB075 See EB price list - - - **90 80 16 ODB090 See EB price list - - - ***125 100 16 ODB125 See EB price list - - - * PMA: maximum allowable pressure ** to be used with FIP stub flange QRNM090 *** to be used with FIP stub flange QRNM110 ODBC Backing ring in PP/FRP black with steel core according to EN/ISO/DIN to be used with stub flange QRNM. Drilled: PN16 up to DN 100 d DN *PMA (bar) Code Pack 20 15 16 ODBC020 See EB price list - - - 25 20 16 ODBC025 See EB price list - - - 32 25 16 ODBC032 See EB price list - - - 40 32 16 ODBC040 See EB price list - - - 50 40 16 ODBC050 See EB price list - - - 63 50 16 ODBC063 See EB price list - - - 75 65 16 ODBC075 See EB price list - - - 90 80 16 ODBC090 See EB price list - - - 110/125 100 16 ODBC110 See EB price list - - - *PMA: maximum allowable pressure 20
ISO-UNI FITTINGS FLANGES - ANSI SERIES OAB Backing ring ANSI B16.5 cl.150 in PP/FRP with steel core for stub flange QRAM d (inch) DN *PMA (bar) Code Pack 1/2" 15 16 OAB012 See EB price list - - - 3/4" 20 16 OAB034 See EB price list - - - 1" 25 16 OAB100 See EB price list - - - 1"1/4 32 16 OAB114 See EB price list - - - 1"1/2 40 16 OAB112 See EB price list - - - 2" 50 16 OAB200 See EB price list - - - 2"1/2 65 16 OAB212 See EB price list - - - 3" 80 16 OAB300 See EB price list - - - 4" 100 16 OAB400 See EB price list - - - * PMA: maximum allowable pressure OABC Blind flange ANSI B16.5 cl.150 in PP/FRP grey with steel core E5.16 d (inch) DN *PMA (bar) Code Pack 1/2" 15 16 OABC012 See EB price list - - - 3/4" 20 16 OABC034 See EB price list - - - 1" 25 16 OABC100 See EB price list - - - 1"1/4 32 16 OABC114 See EB price list - - - 1"1/2 40 16 OABC112 See EB price list - - - 2" 50 16 OABC200 See EB price list - - - 2"1/2 65 16 OABC212 See EB price list - - - 3" 80 16 OABC300 See EB price list - - - 4" 100 16 OABC400 See EB price list - - - *PMA: maximum allowable pressure 21
FITTINGS ISO-BSP Series of fittings designed for conveying fluids under pressure with a hot thread and weld connection system (socket welding). ADAPTOR FOR SOCKET WELDING Technical specifications Size range d 20 63 (mm); R 3/8 2 Nominal pressure PN 10 with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494. Can be coupled to pipes according to EN ISO 15494 Thread: ISO 228-1, DIN 2999 Reference standards Construction criteria: EN ISO 15494 Test methods and requirements: EN ISO 15494 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318 Valve material Seal material, 22
ISO-BSP FITTINGS ADAPTOR FOR SOCKET WELDING MIMM Socket coupling, one end plain socket for socket welding, the other one BS parallel socket threaded with reinforcing metal ring d x R PN Code Pack 20 x 1/2" 10 MIMM020012 3,09 10 300 04 25 x 3/4" 10 MIMM025034 3,93 10 200 04 32 x 1" 10 MIMM032100 5,00 10 120 04 40 x 1"1/4 10 MIMM040114 5,98 5 70 04 50 x 1"1/2 10 MIMM050112 9,83 5 40 04 63 x 2" 10 MIMM063200 12,44 2 24 04 E5.16 23
ISO-BSP FITTINGS ADAPTOR FOR SOCKET WELDING - UNIONS BIFGM Socket union, one plain end for socket welding, the other BS parallel threaded, with or O-ring d x R R 1 PN Pack 20 x 1/2" 1" 10 BIFGM020012E 13,57 BIFGM020012F 15,88 10 80 04 25 x 3/4" 1"1/4 10 BIFGM025034E 14,92 BIFGM025034F 17,11 10 60 04 32 x 1" 1"1/2 10 BIFGM032100E 15,64 BIFGM032100F 18,68 10 40 04 40 x 1"1/4 2" 10 BIFGM040114E 24,40 BIFGM040114F 31,02 2 32 04 50 x 1"1/2 2"1/4 10 BIFGM050112E 35,68 BIFGM050112F 44,27 2 24 04 63 x 2" 2"3/4 10 BIFGM063200E 40,99 BIFGM063200F 48,62 2 12 04 BIFOM Socket union, one end socket for socket welding, the other Brass BS parallel female threaded, with O-Ring d x R R 1 PN Pack 20 x 1/2" 1" 10 BIFOM020012E 15,90 40 80 05 25 x 3/4" 1"1/4 10 BIFOM025034E 19,39 16 32 05 32 x 1" 1"1/2 10 BIFOM032100E 24,24 10 20 05 40 x 1"1/4 2" 10 BIFOM040114E 29,89 8 16 05 50 x 1"1/2 2"1/4 10 BIFOM050112E 38,60 4 8 05 63 x 2" 2"3/4 10 BIFOM063200E 50,11-12 05 BIROM Socket union, one end socket for socket welding, the other Brass BS parallel male threaded, with O-Ring d x R R 1 PN Pack 20 x 1/2" 1" 10 BIROM020012E 17,90 35 70 05 25 x 3/4" 1"1/4 10 BIROM025034E 21,62 15 30 05 32 x 1" 1"1/2 10 BIROM032100E 27,79 8 16 05 40 x 1"1/4 2" 10 BIROM040114E 36,66 8 16 05 50 x 1"1/2 2"1/4 10 BIROM050112E 45,16 4 8 05 63 x 2" 2"3/4 10 BIROM063200E 58,21-10 05 24
ISO-BSP FITTINGS ADAPTOR FOR SOCKET WELDING - UNIONS BIFXM Socket union, one end plain socket for socket welding, the other Stainless Steel A316L BS parallel female threaded, with or O-Ring d x R R 1 PN Pack 20 x 1/2" 1" 10 BIFXM020012E 68,11 BIFXM020012F 69,55 40 80 05 25 x 3/4" 1"1/4 10 BIFXM025034E 82,78 BIFXM025034F 84,25 16 32 05 32 x 1" 1"1/2 10 BIFXM032100E 96,41 BIFXM032100F 98,51 14 28 05 40 x 1"1/4 2" 10 BIFXM040114E 116,54 BIFXM040114F 120,21 8 16 05 50 x 1"1/2 2"1/4 10 BIFXM050112E 127,80 BIFXM050112F 132,60 4 8 05 63 x 2" 2"3/4 10 BIFXM063200E 140,41 BIFXM063200F 146,07-12 05 d x R R 1 PN BIRXM Socket union, one socket for socket welding, the other Stainless Steel A316L BS parallel male threaded, with or O-Ring Pack 20 x 1/2" 1" 10 BIRXM020012E 76,63 BIRXM020012F 78,08 35 70 05 25 x 3/4" 1"1/4 10 BIRXM025034E 92,27 BIRXM025034F 93,76 15 30 05 32 x 1" 1"1/2 10 BIRXM032100E 110,62 BIRXM032100F 112,71 12 24 05 40 x 1"1/4 2" 10 BIRXM040114E 142,97 BIRXM040114F 146,66 8 16 05 50 x 1"1/2 2"1/4 10 BIRXM050112E 149,56 BIRXM050112F 154,37 4 8 05 63 x 2" 2"3/4 10 BIRXM063200E 163,14 BIRXM063200F 168,78-10 05 E5.16 25
ISO-BSP FITTINGS ADAPTOR FOR SOCKET WELDING - BRASS UNION ENDS Q/BFO Brass Union end BS parallel threaded socket R Code Pack 3/8" QBFO038 See E3 price list - - - 1/2" QBFO012 See E3 price list - - - 3/4" QBFO034 See E3 price list - - - 1" QBFO100 See E3 price list - - - 1"1/4 QBFO114 See E3 price list - - - 1"1/2 QBFO112 See E3 price list - - - 2" QBFO200 See E3 price list - - - Q/BRO Brass Union end BS parallel male threaded R Code Pack 3/8" QBRO038 See E3 price list - - - 1/2" QBRO012 See E3 price list - - - 3/4" QBRO034 See E3 price list - - - 1" QBRO100 See E3 price list - - - 1"1/4 QBRO114 See E3 price list - - - 1"1/2 QBRO112 See E3 price list - - - 2" QBRO200 See E3 price list - - - 26
ISO-BSP FITTINGS ADAPTOR FOR SOCKET WELDING - SS A316L UNION ENDS Q/BFX Stainless Steel A316L Union end: BS parallel threaded socket R Code Pack 3/8" QBFX038 See E3 price list - - - 1/2" QBFX012 See E3 price list - - - 3/4" QBFX034 See E3 price list - - - 1" QBFX100 See E3 price list - - - 1"1/4 QBFX114 See E3 price list - - - 1"1/2 QBFX112 See E3 price list - - - 2" QBFX200 See E3 price list - - - Q/BRX Stainless Steel A316L Union end: BS parallel male threaded R Code Pack 3/8" QBRX038 See E3 price list - - - 1/2" QBRX012 See E3 price list - - - 3/4" QBRX034 See E3 price list - - - 1" QBRX100 See E3 price list - - - 1"1/4 QBRX114 See E3 price list - - - 1"1/2 QBRX112 See E3 price list - - - 2" QBRX200 See E3 price list - - - E5.16 27
VKD DN 10 50 FIP has developed a VKD DUAL BLOCK 2-WAY ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required by industrial applications. DUAL BLOCK 2-WAY BALL VALVE Connection system for weld, threaded and flanged joints Patented SEAT STOP ball seat carrier system that lets you micro-adjust ball seats and minimise axial force effects Easy radial disassembly allowing quick replacement of O-rings and ball seats without any need for tools PN10 True Union valve body made for injection moulding equipped with built-in bores for actuation. ISO 9393 compliant test requisites Option of disassembling downstream pipes with the valve in the closed position Floating full bore ball with high surface finish Integrated bracket for valve anchoring Ball seat carriers can be adjusted using the Easytorque adjustment kit Technical specifications Construction 2-way True Union ball valve with locked carrier and lockable union nuts. Size range DN 10 50 Nominal pressure PN 10 with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494. Can be coupled to pipes according to EN ISO 15494 Thread: ISO 228-1, DIN 2999 Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, EN 558-1, DIN 2501, ANSI B16.5 cl.150 Reference standards Construction criteria: EN ISO 16135, EN ISO 15494 Test methods and requirements: ISO 9393 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318 Actuator couplings: ISO 5211 Valve material Seal material, (standard size O-Rings); PTFE (ball seats) Control options Manual control; electric actuator; pneumatic actuator 28
1 2 3 4 E5.16 1 Ergonomic HIPVC handle equipped with removable tool to adjust the ball seat carrier. 2 Handle lock 0-90 SHKD (available as an accessory) ergonomically operable during service and lockable 3 Robust integrated bracket for valve anchoring, for easy and quick automation even after valve installation on the system via the Power Quick module (optional) 4 DUAL BLOCK patented lock system that ensures union nut tightening hold even in severe conditions such as vibrations or heat dilation 29
VKD DN 10 50 DUAL BLOCK 2-WAY BALL VALVE VKDIM DUAL BLOCK ball valve with metric plain socket ends for socket welding Pack 16 10 10 VKDIM016E 38,45 VKDIM016F 46,46 1 22 03 20 15 10 VKDIM020E 38,57 VKDIM020F 46,51 1 22 03 25 20 10 VKDIM025E 45,52 VKDIM025F 53,93 1 10 03 32 25 10 VKDIM032E 56,21 VKDIM032F 68,76 1 10 03 40 32 10 VKDIM040E 69,65 VKDIM040F 83,68 1 8 03 50 40 10 VKDIM050E 90,16 VKDIM050F 106,35 1 8 03 63 50 10 VKDIM063E 112,42 VKDIM063F 142,16 1 4 03 VKDIM/SHX DUAL BLOCK ball valve with handle block and stainless steel inserts for fixation, metric plain socket ends for socket welding Pack 16 10 10 VKDIMSHX016E 51,17 VKDIMSHX016F 59,12 1 22 03 20 15 10 VKDIMSHX020E 51,24 VKDIMSHX020F 59,19 1 22 03 25 20 10 VKDIMSHX025E 58,01 VKDIMSHX025F 66,42 1 10 03 32 25 10 VKDIMSHX032E 69,14 VKDIMSHX032F 81,68 1 10 03 40 32 10 VKDIMSHX040E 88,06 VKDIMSHX040F 102,06 1 8 03 50 40 10 VKDIMSHX050E 106,39 VKDIMSHX050F 122,61 1 8 03 63 50 10 VKDIMSHX063E 129,97 VKDIMSHX063F 159,75 1 4 03 VKDDM DUAL BLOCK ball valve with metric plain spigot ends for socket welding Pack 20 15 10 VKDDM020E 38,57 VKDDM020F 46,51 1 22 03 25 20 10 VKDDM025E 45,52 VKDDM025F 53,93 1 10 03 32 25 10 VKDDM032E 56,21 VKDDM032F 68,76 1 6 03 40 32 10 VKDDM040E 69,65 VKDDM040F 83,68 1 8 03 50 40 10 VKDDM050E 90,16 VKDDM050F 106,35 1 6 03 63 50 10 VKDDM063E 112,42 VKDDM063F 142,16-1 05 30
VKD DN 10 50 DUAL BLOCK 2-WAY BALL VALVE VKDFM DUAL BLOCK ball valve with BS parallel socket threaded ends R DN PN Pack 1/2 15 10 VKDFM012E 45,52 VKDFM012F 53,93 1 22 03 3/4 20 10 VKDFM034E 51,10 VKDFM034F 59,97 1 10 03 1 25 10 VKDFM100E 72,50 VKDFM100F 81,76 1 10 03 1 1/4 32 10 VKDFM114E 77,08 VKDFM114F 92,90 1 8 03 1 1/2 40 10 VKDFM112E 99,41 VKDFM112F 116,16 1 8 03 2 50 10 VKDFM200E 127,31 VKDFM200F 157,99 1 4 03 VKDOM DUAL BLOCK 2-way ball valve with fixed flanges, drilled EN/ISO/DIN PN 10/16. Face to face according to EN 558-1 Pack 20 15 10 VKDOM020E 77,74 VKDOM020F 89,80 1 12 03 25 20 10 VKDOM025E 91,34 VKDOM025F 103,44 1 8 03 32 25 10 VKDOM032E 114,22 VKDOM032F 132,12 1 8 03 40 32 10 VKDOM040E 149,06 VKDOM040F 168,25 1 4 03 50 40 10 VKDOM050E 176,79 VKDOM050F 190,72-1 05 63 50 10 VKDOM063E 218,01 VKDOM063F 252,80-1 05 E5.16 VKDOAM DUAL BLOCK ball valve with ANSI B16.5 cl.150#ff fixed flanges Pack 1/2 15 10 VKDOAM012E 77,74 VKDOAM012F 89,80 1 8 03 3/4 20 10 VKDOAM034E 91,34 VKDOAM034F 103,44 1 8 03 1 25 10 VKDOAM100E 114,22 VKDOAM100F 132,12 1 4 03 1 1/4 32 10 VKDOAM114E 149,06 VKDOAM114F 168,25 1 4 03 1 1/2 40 10 VKDOAM112E 176,79 VKDOAM112F 190,72-1 05 2 50 10 VKDOAM200E 218,01 VKDOAM200F 252,80-1 05 31
VKD DN 10 50 DUAL BLOCK 2-WAY BALL VALVE VKDBM DUAL BLOCK ball valve with SDR11 metric long spigot ends (CVDM) for butt welding Pack 20 15 10 VKDBM020E 42,74 VKDBM020F 51,10 1 22 03 25 20 10 VKDBM025E 50,18 VKDBM025F 59,98 1 12 03 32 25 10 VKDBM032E 60,88 VKDBM032F 75,22 1 8 03 40 32 10 VKDBM040E 76,16 VKDBM040F 92,90 1 8 03 50 40 10 VKDBM050E 98,50 VKDBM050F 117,07 1 8 03 63 50 10 VKDBM063E 122,66 VKDBM063F 156,99 1 1 05 Note: The valve might be supplied in VKDIM version with 2 CVDM end connectors for butt welding included VKDBEM DUAL BLOCK ball valve with PE100 SDR11 metric long spigot ends (CVDE) for butt welding or electrofusion Pack 20 15 10 VKDBEM020E 42,74 VKDBEM020F 51,10 1 22 03 25 20 10 VKDBEM025E 50,18 VKDBEM025F 59,97 1 12 03 32 25 10 VKDBEM032E 60,88 VKDBEM032F 75,22 1 8 03 40 32 10 VKDBEM040E 76,16 VKDBEM040F 92,90 1 8 03 50 40 10 VKDBEM050E 98,50 VKDBEM050F 117,07 1 8 03 63 50 10 VKDBEM063E 122,66 VKDBEM063F 156,99-1 05 Note: The valve might be supplied in VKDIM version with 2 CVDE end connectors for butt welding included 32
VKD DN 65 100 FIP has developed a VKD DUAL BLOCK ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required by industrial applications. This valve is also equipped with a customisable Labelling System. DUAL BLOCK 2-WAY BALL VALVE Connection system for weld, threaded and flanged joints Patented SEAT STOP ball seat carrier system that lets you micro-adjust ball seats and minimise axial force effects Easy radial disassembly allowing quick replacement of O-rings and ball seats without any need for tools PN10 True Union valve body made for injection moulding equipped with built-in bores for actuation. ISO 9393 compliant test requisites Option of disassembling downstream pipes with the valve in the closed position Full bore ball with high surface finish Integrated bracket for valve anchoring Possibility of installing a gear or pneumatic and/or electric actuators by applying an ISO standard bore PP-GR flange STAINLESS steel co-moulded stem, with square section as per ISO 5211 E5.16 Technical specifications Construction 2-way True Union ball valve with locked carrier and union nuts Size range DN 65 100 Nominal pressure PN 10 with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494. Can be coupled to pipes according to EN ISO 15494 Thread: ISO 228-1, DIN 2999 Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, EN 558-1, DIN 2501, ANSI B16.5 cl.150 Reference standards Construction criteria: EN ISO 16135, EN ISO 15494 Test methods and requirements: ISO 9393 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318 Actuator couplings: ISO 5211 Valve material Seal material, ; PTFE (ball seats) Control options Manual control; electric actuator; pneumatic actuator 33
1 2 4 3 4 1 HIPVC ergonomic multifunctional handle for quick operation, lock and graduated adjustment in 10 positions. Possibility of inhibiting rotation with a lock 2 Customisable Labelling System: built-in LCE module made of a transparent protection plug and customisable tag holder using the LSE set (available as an accessory). The customisation lets you identify the valve on the system according to specific needs 3 DUAL BLOCK patented lock system that ensures union nut tightening hold even in severe conditions such as vibrations or heat dilation 4 Double stem with double O-Rings for ball centring and operating torque reduction 34
VKD DN 65 100 DUAL BLOCK 2-WAY BALL VALVE VKDIM DUAL BLOCK ball valve with metric plain socket ends for socket welding Pack 75 65 10 VKDIM075E 317,33 VKDIM075F 400,11-1 04 90 80 10 VKDIM090E 398,87 VKDIM090F 502,95-1 03 110 100 10 VKDIM110E 482,90 VKDIM110F 586,94 1 1 03 VKDDM DUAL BLOCK ball valve with metric plain spigot ends for socket welding Pack 75 65 10 VKDDM075E 317,33 VKDDM075F 400,11-1 04 90 80 10 VKDDM090E 398,87 VKDDM090F 502,95-1 03 110 100 10 VKDDM110E 482,90 VKDDM110F 586,94 1 1 03 E5.16 VKDOM DUAL BLOCK ball valve with EN/ISO/DIN PN 10/16 fixed flanges*, face to face according to EN558-1 Pack 75 65 10 VKDOM075E 428,40 VKDOM075F 511,20-1 04 90 80 10 VKDOM090E 538,47 VKDOM090F 642,53-1 03 110 100 10 VKDOM110E 651,94 VKDOM110F 755,97 1 1 03 * Flanges with oval holes matching both DIN and ANSI standards 35
VKD DN 65 100 DUAL BLOCK 2-WAY BALL VALVE VKDOAM DUAL BLOCK ball valve with ANSI B16.5 cl.150#ff fixed flanges * Pack 2"1/2 65 10 VKDOM075E 428,40 VKDOM075F 511,20-1 04 3" 80 10 VKDOM090E 538,47 VKDOM090F 642,53-1 03 4" 100 10 VKDOM110E 651,94 VKDOM110F 755,97 1 1 03 * Flanges with oval holes matching both DIN and ANSI standards VKDBM DUAL BLOCK ball valve with SDR11 metric long spigot ends (CVDM) for butt welding Pack 75 65 10 VKDBM075E 348,72 VKDBM075F 431,51-1 04 90 80 10 VKDBM090E 439,00 VKDBM090F 543,05 1 1 03 110 100 10 VKDBM110E 530,50 VKDBM110F 634,54 1 1 03 VKDBEM DUAL BLOCK 2-way ball valve with PE100 SDR 11 male end connectors for butt welding or electrofusion (CVDE) Pack 75 65 10 VKDBEM075E 348,72 VKDBEM075F 431,51-1 04 90 80 10 VKDBEM090E 439,00 VKDBEM090F 543,05-1 03 110 100 10 VKDBEM110E 530,50 VKDBEM110F 634,54 1 1 03 36
VKR DN 10 50 The VKR DUAL BLOCK valve combines high reliability and safety aspects typical of VKD full bore ball valves with the new flow adjustment function with typical linear curve that meets the most stringent needs typical of industrial applications. DUAL BLOCK REGULATING BALL VALVE Connection system for weld, threaded and flanged joints Patented SEAT STOP ball seat carrier system that lets you micro-adjust ball seats and minimise axial force effects Easy radial disassembly allowing quick replacement of O-rings and ball seats without any need for tools PN10 True Union valve body made for injection moulding equipped with built-in bores for actuation. ISO 9393 compliant test requisites Option of disassembling downstream pipes with the valve in the closed position High surface finish stem with double O-Ring and double groove ball connection Integrated bracket for valve anchoring Ball seat carrier can be adjusted using the Easytorque adjustment kit Actuation option: version with electric modulating actuator with 4-20 ma / 0-10 V inlet and 4-20 ma / 0-10 V outlet to monitor the position Valve suitable for carrying fluids that are clean and free of suspended particles E5.16 Technical specifications Construction 2-way True Union regulating ball valve with locked carrier and lockable union nuts Size range DN 10 50 Nominal pressure PN 10 with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494. Can be coupled to pipes according to EN ISO 15494 Thread: ISO 228-1, DIN 2999 Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, EN 558-1, DIN 2501, ANSI B16.5 cl.150 Reference standards Construction criteria: EN ISO 16135, EN ISO 15494 Test methods and requirements: ISO 9393 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318 Actuator couplings: ISO 5211 Valve material Seal material, (standard size O-Rings); PTFE (ball seats) Control options Manual control; electric actuator 37
1 2 3 4 5 1 HIPVC ergonomic multifunctional handle with position indicator and removable key to adjust the ball seat carrier 2 Flow direction indication plate and opening angle with graduated scale with 5 detail for clear and accurate readings 3 90 operating angle that permits the use of standard quarter turn actuators 4 The patented ball design provides linear flow adjustment throughout its range of operation even when the valve is open just a few degrees and guarantees minimum pressure drops 5 Patented DUAL BLOCK system: prevents union nuts from loosening even under extreme operating conditions: e.g. vibration or thermal expansion 38
VKR DN 10 50 DUAL BLOCK REGULATING BALL VALVE VKRIM DUAL BLOCK regulating ball valve with metric plain socket ends for socket welding Pack 16 10 10 VKRIM016E 157,41 VKRIM016F 165,39 1 22 03 20 15 10 VKRIM020E 157,50 VKRIM020F 165,44 1 22 03 25 20 10 VKRIM025E 174,53 VKRIM025F 182,94 1 12 03 32 25 10 VKRIM032E 205,75 VKRIM032F 218,29 1 12 03 40 32 10 VKRIM040E 230,53 VKRIM040F 244,56 1 8 03 50 40 10 VKRIM050E 286,15 VKRIM050F 302,34 1 8 03 63 50 10 VKRIM063E 304,56 VKRIM063F 334,30 1 06 02 VKRDM DUAL BLOCK regulating ball valve with metric plain spigot ends for socket welding Pack 20 15 10 VKRDM020E 157,50 VKRDM020F 165,44 1 22 03 25 20 10 VKRDM025E 174,53 VKRDM025F 182,94 1 10 03 32 25 10 VKRDM032E 205,75 VKRDM032F 218,29 1 6 03 40 32 10 VKRDM040E 230,53 VKRDM040F 244,56 1 8 03 50 40 10 VKRDM050E 286,15 VKRDM050F 302,34 1 6 03 63 50 10 VKRDM063E 304,56 VKRDM063F 334,30-1 05 E5.16 VKRFM DUAL BLOCK regulating ball valve with BS parallel socket threaded ends R DN PN Pack 3/8 10 10 VKRFM038E 164,44 VKRFM038F 172,87 1 22 03 1/2 15 10 VKRFM012E 164,44 VKRFM012F 172,87 1 22 03 3/4 20 10 VKRFM034E 180,11 VKRFM034F 188,98 1 10 03 1 25 10 VKRFM100E 222,03 VKRFM100F 231,28 1 10 03 1 1/4 32 10 VKRFM114E 237,96 VKRFM114F 253,78 1 8 03 1 1/2 40 10 VKRFM112E 295,38 VKRFM112F 312,13 1 8 03 2 50 10 VKRFM200E 319,45 VKRFM200F 350,12 1 4 03 39
VKR DN 10 50 DUAL BLOCK REGULATING BALL VALVE VKROM DUAL BLOCK regulating ball valve with EN/ISO/DIN PN 10/16 fixed flanges, face to face according to EN 558-1 Pack 20 15 10 VKROM020E 196,69 VKROM020F 208,74 1 - - 25 20 10 VKROM025E 220,34 VKROM025F 232,46 1 - - 32 25 10 VKROM032E 263,76 VKROM032F 281,66 1 - - 40 32 10 VKROM040E 309,94 VKROM040F 329,13 1 - - 50 40 10 VKROM050E 372,78 VKROM050F 386,70-1 05 63 50 10 VKROM063E 410,14 VKROM063F 444,94-1 05 VKROAM DUAL BLOCK regulating ball valve with ANSI B16.5 cl.150#ff fixed flanges Pack 1/2 15 10 VKROAM012E 196,69 VKROAM012F 208,74 1 - - 3/4 20 10 VKROAM034E 220,34 VKROAM034F 232,46 1 - - 1 25 10 VKROAM100E 263,76 VKROAM100F 281,66 1 - - 1 1/4 32 10 VKROAM114E 309,94 VKROAM114F 329,13 1 - - 1 1/2 40 10 VKROAM112E 372,78 VKROAM112F 386,70-1 05 2 50 10 VKROAM200E 410,14 VKROAM200F 444,94-1 05 VKRBM DUAL BLOCK regulating ball valve with SDR11 metric long spigot ends (CVDM) for butt welding Pack 20 15 10 VKRBM020E 161,69 VKRBM020F 170,05 1 22 03 25 20 10 VKRBM025E 179,19 VKRBM025F 188,99 1 12 03 32 25 10 VKRBM032E 210,41 VKRBM032F 224,76 1 8 03 40 32 10 VKRBM040E 237,05 VKRBM040F 253,78 1 8 03 50 40 10 VKRBM050E 294,47 VKRBM050F 313,04 1 8 03 63 50 10 VKRBM063E 314,79 VKRBM063F 349,14-1 05 Note: The valve might be supplied in VKRIM version with 2 CVDM end connectors for butt welding included 40
VKR DN 10 50 DUAL BLOCK REGULATING BALL VALVE VKRBEM DUAL BLOCK regulating ball valve with PE100 SDR11 metric series long spigot ends (CVDE) for butt welding or electrofusion Pack 20 15 10 VKRBEM020E 161,69 VKRBEM020F 170,05 1 22 03 25 20 10 VKRBEM025E 179,19 VKRBEM025F 188,98 1 12 03 32 25 10 VKRBEM032E 210,41 VKRBEM032F 224,76 1 8 03 40 32 10 VKRBEM040E 237,05 VKRBEM040F 253,78 1 8 03 50 40 10 VKRBEM050E 294,47 VKRBEM050F 313,04 1 8 03 63 50 10 VKRBEM063E 314,79 VKRBEM063F 349,14-1 05 Note: The valve might be supplied in VRDIM version with 2 CVDE end connectors for butt welding included E5.16 41
TKD DN 15 50 FIP has developed a VKD DUAL BLOCK ball valve to introduce a high reference standard in thermosplastic valve design. TKD is a True Union diverting and mixing ball valve that meets the most stringent needs required in industrial applications. DUAL BLOCK 3-WAY BALL VALVE Connection system for weld and threaded joints Patented SEAT STOP ball seat carrier system that lets you micro-adjust ball seats and minimise axial force effects Easy radial disassembly allowing quick replacement of O-rings and ball seats without any need for tools PN10 True Union valve body made for injection moulding equipped with built-in bores for actuation. ISO 9393 compliant test requisites Option of disassembling downstream pipes with the valve in the closed position High surface finish stem with double O-Ring and double groove ball connection, equipped with optical position indicator for correct handle installation Integrated bracket for valve anchoring Possibility of installing pneumatic and/or electric actuators thanks to the robust integrated bracket for valve anchoring for easy and quick automation using the Power Quick module (optional) Technical specifications Construction 3-way True Union ball valve with locked carrier and lockable union nuts Size range DN 15 50 Nominal pressure PN 10 with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494. Can be coupled to pipes according to EN ISO 15494 Thread: ISO 228-1, DIN 2999 Reference standards Construction criteria: EN ISO 16135, EN ISO 15494 Test methods and requirements: ISO 9393 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318 Actuator couplings: ISO 5211 Valve material Seal material, (standard size O-Rings); PTFE (ball seats) Control options Manual control; electric actuator; pneumatic actuator 42
1 2 3 4 5 E5.16 1 Ergonomic HIPVC handle equipped with removable key to adjust the carrier of the ball seats. Possibility of installing the LTKD stroke limiter (available as an accessory) that permits ball and handle rotation only for set opening and closing angles at 90 or 180 2 Handle lock 0-90 SHKD (available as an accessory) ergonomically operable during service and lockable 3 DUAL BLOCK patented lock system that ensures union nut tightening hold even in severe conditions such as vibrations or heat dilation 4 Ball shutter high surface finish with floating full passage with T or L port 5 4 PTFE ball seat system that compensates axial force guaranteeing optimal manageability and long working life 43
TKD DN 15 50 DUAL BLOCK 3-WAY BALL VALVE "T" BORE TKDIM DUAL BLOCK 3-way ball valve with metric plain socket ends for socket welding. TKDIM - T bore Pack 20 15 10 TKDIM020E 85,30 TKDIM020F 96,39 1 6 04 25 20 10 TKDIM025E 95,86 TKDIM025F 110,24 1 4 04 32 25 10 TKDIM032E 123,00 TKDIM032F 141,43 1 4 04 40 32 10 TKDIM040E 140,30 TKDIM040F 165,55 1 2 04 50 40 10 TKDIM050E 166,04 TKDIM050F 207,54-1 05 63 50 10 TKDIM063E 209,95 TKDIM063F 262,47-1 05 Note: The valve might be supplied in TKDIM version with 3 threaded end connectors included TKDFM DUAL BLOCK 3-way ball valve with BS parallel socket threaded ends. TKDFM - T bore R DN PN Pack 1/2 15 10 TKDFM012E 94,93 TKDFM012F 106,03 1 6 04 3/4 20 10 TKDFM034E 106,90 TKDFM034F 121,25 1 4 04 1 25 10 TKDFM100E 137,15 TKDFM100F 155,60 1 4 04 1 1/4 32 10 TKDFM114E 156,85 TKDFM114F 182,10 1 2 04 1 1/2 40 10 TKDFM112E 186,80 TKDFM112F 228,28-1 05 2 50 10 TKDFM200E 236,23 TKDFM200F 288,72-1 05 Note: The valve might be supplied in TKDIM version with 3 threaded end connectors included 44
TKD DN 15 50 DUAL BLOCK 3-WAY BALL VALVE "L" BORE LKDIM DUAL BLOCK 3-way ball valve with metric plain socket ends for socket welding. LKDIM - L bore Pack 20 15 10 LKDIM020E 99,76 LKDIM020F 110,85 1 6 04 25 20 10 LKDIM025E 112,41 LKDIM025F 126,79 1 4 04 32 25 10 LKDIM032E 144,22 LKDIM032F 162,66 1 4 04 40 32 10 LKDIM040E 165,13 LKDIM040F 190,42 1 2 04 50 40 10 LKDIM050E 197,15 LKDIM050F 238,67-1 05 63 50 10 LKDIM063E 249,32 LKDIM063F 301,85-1 05 Note: The valve might be supplied in TKDIM version with 3 threaded end connectors included R DN PN LKDFM DUAL BLOCK 3-way ball valve with BS parallel socket threaded ends. LKDFM - L bore Pack 1/2 15 10 LKDFM012E 109,39 LKDFM012F 120,48 1 6 04 3/4 20 10 LKDFM034E 123,44 LKDFM034F 137,79 1 4 04 1 25 10 LKDFM100E 158,35 LKDFM100F 176,79 1 4 04 1 1/4 32 10 LKDFM114E 181,69 LKDFM114F 206,96 1 2 04 1 1/2 40 10 LKDFM112E 217,93 LKDFM112F 259,40-1 05 2 50 10 LKDFM200E 275,57 LKDFM200F 328,07-1 05 E5.16 Note: The valve might be supplied in TKDIM version with 3 threaded end connectors included 45
SR DN 15 50 The SR check valve allows the passage of fluid in a single direction. BALL CHECK VALVE Connection system for weld joints PN10 valve body made for injection moulding and European Directive 97/23/EC compliant for PED pressurised equipment. ISO 9393 compliant test requirements The valve can only be used with fluids with specific weight under 1,20 g/cm3 Sealing system with antiblow out design Ball entirely in talc-filled PP Can be maintained with the valve body installed Can be installed in either a vertical (preferable) or horizontal position Technical specifications Construction Ball check valve Size range DN 15 50 Nominal pressure PN 10 with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494. Can be coupled to pipes according to EN ISO 15494 Reference standards Construction criteria: EN ISO 16137, EN ISO 15494 Test methods and requirements: ISO 9393 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318 Valve material Body: Ball: PP Seal material (spare set in available on request) 46
SR DN 15 50 BALL CHECK VALVE SRIM Ball check valve with plain socket/spigot ends for socket welding d DN Code Pack 20 15 SRIM020F 43,66 1 16 04 25 20 SRIM025F 48,34 1 20 04 32 25 SRIM032F 52,99 1 6 04 40 32 SRIM040F 65,09 1 3 04 50 40 SRIM050F 77,08 1 3 04 63 50 SRIM063F 115,69 1 3 04 Note: for version use the version + spare set in SETSR E, (see ER Price List) E5.16 47
FK DN 40 400 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and longterm reliability. This valve is also equipped with the customisable Labelling System. BUTTERFLY VALVE Interchangeable Disk in with through shaft, available in different thermoplastic materials: PVC-U, PVC-C, ABS, PVDF Overall dimensions of the valve in accordance with standard ISO 5752 (DN 40 200 Medium series 25, DN 250 300 Long Series 16) and DIN 3202 K2 and ISO 5752 (DN DN 65 200 K2, DN 250 300 K3) Can also be installed as an end line valve, bottom discharge valve or tank dump valve Special Lug version PN 10 fully drilled according to DIN 2501 or ANSI B16.5 cl.150 with molded-in AISI 316 STAINLESS steel threaded inserts Valve material compatibility () with water conveyance, drinking water and other food substances according to current regulations Possibility of installing a manual reducer or pneumatic and/or electric actuators by applying an ISO standard drilling PP-GR flanges. DN 40 200 valve equipped with plate with rack in PP-GR. For actuated versions with flange drilled according to ISO 5211 F05, F07, F10. DN 250 300 valve, fitted with one-piece top flange in high mechanical strength PP-GR with mounting flange for internal components drilled according to standard ISO 5211 F10 (excluding DN 350 400), F12, F14. Technical specifications Construction Bi-directional centric butterfly valve Size range DN 40 400 Nominal pressure Wafer version DN 40 250: PN 10 with water at 20 C DN 300: PN 8 with water at 20 C DN 350: PN 7 with water at 20 C DN 400: PN 6 with water at 20 C Lug version DN 65 200: PN 10 with water at 20 C DN 250 300: PN 6 with water at 20 C Temperature range 0 C 100 C Coupling standards Flanging system: EN ISO 15494, DIN 2501, ISO 7005-1, EN 1092-1, ASTM B16.5 cl.150, JIS B 2220 Reference standards Construction criteria: EN ISO 16136, EN ISO 15494 Test methods and requirements: ISO 9393 Actuator couplings: ISO 5211 Valve material Body: PP-GR Disk: Stem: AISI steel 316 Seal material Liner:,. On request NBR Manual control (DN 40 200); Gear, pneumatic Control options actuator, electric actuator 48
2 1 4 5 3 6 E5.16 1 Ergonomic handle in HIPVC equipped with locking and unlocking device, release, quick operation and graduated adjustment in 10 intermediate positions (DN 40 200). The operating range, starting from the first few degrees of valve opening, also guarantees extremely low pressure drops. 2 Customisable Labelling System: integrated module in the handle, made of a transparent protection plug and a customisable tag holder using the LSE set (available as an accessory). The customisation lets you identify the valve on the system according to specific needs. 3 STAINLESS steel square section stem completely isolated from the fluid complying with standard ISO 5211: DN 40 65: 11 mm DN 80 100: 14 mm DN 125 150: 17 mm DN 200: 22 mm DN 250 400: 27 mm 4 Body in polypropylene based compound reinforced with fibreglass (PP-GR) resistant to UV rays and characterised by high mechanical strength. 5 Drilling pattern using oval slots that allow coupling to flanges according to numerous international standards. The special self-centring inserts in ABS supplied for DN 40 200 guarantee the correct axial alignment of the valve during installation. For DN 250 400 valves, the drilling pattern for the selfcentring system is of the traditional according to DIN and ANSI standards. 6 Interchangeable liner with the dual function of forming a hydraulic seal and isolating the body from the fluid. 49
FK DN 40 400 BUTTERFLY VALVE FKOM/LM Hand operated Butterfly valve Pack 50-1"1/2 40 10 FKOMLM050E 201,49 FKOMLM050F 287,30 1 6 03 63-2" 50 10 FKOMLM063E 213,34 FKOMLM063F 304,17 1 6 03 75-2"1/2 65 10 FKOMLM075E 237,05 FKOMLM075F 337,97 1 6 02 90-3" 80 10 FKOMLM090E 249,26 FKOMLM090F 354,80 1 6 02 110-4" 100 10 FKOMLM110E 270,70 FKOMLM110F 379,27 1 5 02 140-5" 125 10 FKOMLM140E 359,38 FKOMLM140F 508,49 1 4 02 160-6" 150 10 FKOMLM160E 388,43 FKOMLM160F 529,15 1 4 02 *200-8" 200 10 FKOMLM225E 503,12 FKOMLM225F 686,64 1 2 02 *225-8" 200 10 FKOMLM225E 503,12 FKOMLM225F 686,64 1 2 02 Note: for d75-d225 NBR primary liner available, see ER Price list *d 200: FK d 225 with chamfered end stub QBM (QBM17FK200), see EB Price list FKOM/LM LUG ISO-DIN Hand operated Butterfly valve, version Lug ISO-DIN Pack 75 65 10 FKOLMLM075E 331,86 FKOLMLM075F 432,79 1 6 02 90 80 10 FKOLMLM090E 373,15 FKOLMLM090F 478,68 1 6 02 110 100 10 FKOLMLM110E 405,27 FKOLMLM110F 513,85 1 5 02 140 125 10 FKOLMLM140E 539,08 FKOLMLM140F 688,16 1 4 02 160 150 10 FKOLMLM160E 582,68 FKOLMLM160F 723,36 1 4 02 *200 200 10 FKOLMLM225E 704,26 FKOLMLM225F 887,75 1 2 02 225 200 10 FKOLMLM225E 704,26 FKOLMLM225F 887,75 1 2 02 Note: for d75-d225 NBR primary liner available, see ER Price list *d 200: FK d 225 with chamfered end stub QBM (QBM17FK200), see EB Price list 50
FK DN 40 400 BUTTERFLY VALVE FKOM/LM LUG ANSI Hand operated Butterfly valve, version Lug ANSI Pack 2 1/2 65 10 FKOALMLM212E 379,27 FKOALMLM212F 480,18 1 6 02 3 80 10 FKOALMLM300E 422,83 FKOALMLM300F 528,38 1 6 02 4 100 10 FKOALMLM400E 459,56 FKOALMLM400F 568,13 1 5 02 5 125 10 FKOALMLM500E 610,93 FKOALMLM500F 760,05 1 4 02 6 150 10 FKOALMLM600E 660,66 FKOALMLM600F 801,33 1 4 02 8 200 10 FKOALMLM800E 804,36 FKOALMLM800F 987,88 1 2 02 Note: for d 2 1/2 - d 8 NBR primary liner available, see ER Price list FKOM/FM Butterfly valve with bare shaft Pack 50-1"1/2 40 10 FKOMFM050E 171,59 FKOMFM050F 258,68 1 6 03 63-2" 50 10 FKOMFM063E 181,69 FKOMFM063F 273,91 1 6 03 75-2"1/2 65 10 FKOMFM075E 201,86 FKOMFM075F 304,32 1 6 02 90-3" 80 10 FKOMFM090E 219,46 FKOMFM090F 326,51 1 6 02 110-4" 100 10 FKOMFM110E 238,57 FKOMFM110F 349,43 1 5 02 140-5" 125 10 FKOMFM140E 316,57 FKOMFM140F 467,98 1 4 02 160-6" 150 10 FKOMFM160E 349,43 FKOMFM160F 502,38 1 4 02 200*/225-8" 200 10 FKOMFM225E 452,68 FKOMFM225F 652,25 1 2 02 250 **250 10 FKOMFM280E 1.442,32 FKOMFM280F 2.334,01-1 08 280 **250 10 FKOMFM280E 1.442,32 FKOMFM280F 2.334,01-1 08 315 **300 8 FKOMFM315E 1.573,10 FKOMFM315F 2.545,07-1 08 355 **350 7 FKOMFM355E 2.482,89 FKOMFM355F 4.515,01 - - 00 400 **400 6 FKOMFM400E 2.867,85 FKOMFM400F 5.800,96 - - 00 10" ***250 10 FKOAMFM810E 1.442,32 FKOAMFM810F 2.334,01-1 08 12" ***300 8 FKOAMFM812E 1.573,10 FKOAMFM812F 2.545,07-1 08 14" ***350 7 FKOAMFM814E 2.482,89 FKOAMFM814F 4.515,01 - - 00 16" ***400 6 FKOAMFM816E 2.867,85 FKOAMFM816F 5.800,96 - - 00 E5.16 Note: for d75-d225 NBR primary liner available, see ER Price list *d 200: FK d 225 with chamfered end stub QBM (QBM17FK200), see EB Price List **ISO-DIN ***ANSI B.16.5 cl.150 51
FK DN 40 400 BUTTERFLY VALVE FKOM/FM LUG ISO-DIN Butterfly valve with bare shaft, version Lug ISO-DIN Pack 75 65 10 FKOLMFM075E 296,67 FKOLMFM075F 399,16 1 6 02 90 80 10 FKOLMFM090E 343,32 FKOLMFM090F 450,37 1 6 02 110 100 10 FKOLMFM110E 373,14 FKOLMFM110F 484,01 1 5 02 140 125 10 FKOLMFM140E 496,25 FKOLMFM140F 647,64 1 4 02 160 150 10 FKOLMFM160E 543,67 FKOLMFM160F 696,58 1 4 02 *200 200 10 FKOLMFM225E 653,77 FKOLMFM225F 853,35 1 2 02 225 200 10 FKOLMFM225E 653,77 FKOLMFM225F 853,35 1 2 02 Note: for d75-d225 NBR primary liner available, see ER Price list *d 200: FK d 225 with chamfered end stub QBM (QBM17FK200), see EB Price list FKOM/FM LUG ANSI Butterfly valve with bare shaft, version Lug ANSI d (inch) DN PN Pack 2 1/2 65 10 FKOALMFM212E 344,09 FKOALMFM212F 446,56 1 6 02 3 80 10 FKOALMFM300E 393,03 FKOALMFM300F 500,08 1 6 02 4 100 10 FKOALMFM400E 427,42 FKOALMFM400F 538,32 1 5 02 5 125 10 FKOALMFM500E 568,13 FKOALMFM500F 719,53 1 4 02 6 150 10 FKOALMFM600E 621,66 FKOALMFM600F 774,59 1 4 02 8 200 10 FKOALMFM800E 753,89 FKOALMFM800F 953,49 1 2 02 10 250 6 FKOALMFM810E 2.406,36 FKOALMFM810F 3.298,05-1 08 12 300 6 FKOALMFM812E 2.559,25 FKOALMFM812F 3.531,22-1 08 Note: for d 2 1/2 - d 8 NBR primary liner available, see ER Price List 52
FK DN 40 400 BUTTERFLY VALVE FKOM/RM Gear operated Butterfly valve Pack 75-2"1/2 65 10 FKOMRM075E 544,44 FKOMRM075F 644,59-1 04 90-3" 80 10 FKOMRM090E 556,66 FKOMRM090F 661,42-1 04 110-4" 100 10 FKOMRM110E 578,05 FKOMRM110F 686,64-1 04 140-5" 125 10 FKOMRM140E 666,79 FKOMRM140F 815,89-1 02 160-6" 150 10 FKOMRM160E 695,84 FKOMRM160F 836,53-1 02 200-8" 200 10 FKOMRM225E 880,11 FKOMRM225F 1.063,63-1 02 225-8" 200 10 FKOMRM225E 880,11 FKOMRM225F 1.063,63-1 02 250 **250 10 FKOMRM280E 1.661,03 FKOMRM280F 2.552,74-1 08 280 **250 10 FKOMRM280E 1.661,03 FKOMRM280F 2.552,74-1 08 315 **300 8 FKOMRM315E 1.791,81 FKOMRM315F 2.763,79-1 08 355 **350 7 FKOMRM355E 3.049,38 FKOMRM355F 5.081,51 - - 00 400 **400 6 FKOMRM400E 3.434,35 FKOMRM400F 6.367,46 - - 00 10" ***250 10 FKOAMRM810E 1.661,03 FKOAMRM810F 2.552,74-1 08 12" ***300 8 FKOAMRM812E 1.791,81 FKOAMRM812F 2.763,79-1 08 14" ***350 7 FKOAMRM814E 3.049,38 FKOAMRM814F 5.081,51 - - 00 16" ***400 6 FKOAMRM816E 3.434,35 FKOAMRM816F 6.367,46 - - 00 Note: for d75-d225 NBR primary liner available, see ER Price list *d 200: FK d 225 with chamfered end stub QBM (QBM17FK200), see EB Price list **ISO-DIN ***ANSI B.16.5 150# E5.16 FKOM/RM LUG ISO-DIN Gear operated Butterfly valve, version Lug ISO-DIN Pack 75 65 10 FKOLMRM075E 639,24 FKOLMRM075F 739,41-1 04 90 80 10 FKOLMRM090E 680,55 FKOLMRM090F 785,28-1 04 110 100 10 FKOLMRM110E 712,66 FKOLMRM110F 821,22-1 04 140 125 10 FKOLMRM140E 846,46 FKOLMRM140F 995,56-1 02 160 150 10 FKOLMRM160E 890,07 FKOLMRM160F 1.030,74-1 02 *200 200 10 FKOLMRM225E 1.081,20 FKOLMRM225F 1.264,71-1 02 225 200 10 FKOLMRM225E 1.081,20 FKOLMRM225F 1.264,71-1 02 Note: for d75-d225 NBR primary liner available, see ER Price list *d 200: FK d 225 with chamfered end stub QBM (QBM17FK200), see EB Price list 53
FK DN 40 400 BUTTERFLY VALVE FKOM/RM LUG ANSI Gear operated Butterfly valve, version Lug ANSI Pack 2 1/2 65 10 FKOALMRM212E 686,64 FKOALMRM212F 786,81 1 1 02 3 80 10 FKOALMRM300E 730,22 FKOALMRM300F 835,00-1 04 4 100 10 FKOALMRM400E 766,93 FKOALMRM400F 875,53-1 04 5 125 10 FKOALMRM500E 918,33 FKOALMRM500F 1.067,44 1 1 02 6 150 10 FKOALMRM600E 968,05 FKOALMRM600F 1.108,73 1 1 02 8 200 10 FKOALMRM800E 1.181,34 FKOALMRM800F 1.364,86-1 02 10 250 6 FKOALMRM810E 2.625,11 FKOALMRM810F 3.516,81-1 08 12 300 6 FKOALMRM812E 2.777,95 FKOALMRM812F 3.749,93-1 08 Note: for d 2 1/2 - d 8 NBR primary liner available, see ER Price list 54
DK DN 15 65 The DK DIALOCK diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ensuring an optimum linearity of the flow adjustment curve. The DK is extremely compact and very light. The innovative handwheel is equipped with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in any position. DIALOCK 2-WAY DIAPHRAGM VALVE Connection system for solvent welding and for threaded and flanged joints. Optimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the body. Internal components in metal, totally isolated from the fluid and external environment. Modularity of the range: only 2 handwheel and 4 diaphragm and bonnet sizes for 7 different valve sizes. Handwheel that stays at the same height during rotation. It is also fitted with a graduated optical indicator protected by a transparent PVC cap with seal O-Ring. Bonnet fastening screws in STAINLESS steel protected by PE plugs. Absence of metal parts exposed to the external environment to prevent any risk of corrosion. New flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. CDSA (Circular Diaphragm Sealing Angle) system that, thanks to the uniform distribution of shutter pressure on the diaphragm seal, offers the following advantages: - operating torque reduction - reduced mechanical stress on all valve components (actuator, body and diaphragm) - low risk of the accumulation of deposits, contamination or damage to the diaphragm due to crystallisation - easy to clean valve interior Technical specifications Construction Diaphragm valve with maximised flow rate and DIALOCK lockable handwheel Size range DN 15 65 Nominal pressure PN 10 with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494. Can be coupled to pipes according to EN ISO 15494 Thread: ISO 228-1, DIN 2999 Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, EN 558-1, DIN 2501, ANSI B16.5 cl.150 Reference standards Construction criteria: EN ISO 16138, EN ISO 15494 Test methods and requirements: ISO 9393 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318 Valve material Body: Bonnet and handwheel: PP-GR Position indicator cap PVC Diaphragm material Control options,, PTFE (on request NBR) Manual control; pneumatic actuator E5.16 55
1 2 3 4 5 7 6 8 1 High visibility graduated optical position indicator protected by a transparent cap with seal O-Ring 2 Customisation plate. The customisation lets you identify the valve on the system according to specific needs 3 DIALOCK SYSTEM: innovative handwheel with a patented immediate and ergonomic locking device that allows it to be adjusted and locked in over 300 positions 4 Handwheel and bonnet in high mechanical strength and chemically resistant PP-GR, providing full protection by isolating all internal metal parts from contact with external agents 5 Floating pin connection between the control screw and diaphragm to prevent concentrated loads, improve the seal and extend its lifetime 6 New design of valve body interior: substantially increased flow coefficient and reduced pressure drop. The degree of efficiency reached has also enabled the size and weight of the valve to be reduced. 7 Adjustment linearity: the internal profiles of the valve also greatly improve its characteristic curve, resulting in extremely sensitive and precise adjustment along the entire stroke of the shutter 8 Valve anchoring bracket integrated in the body, with threaded metal inserts allowing simple panel or wall mounting using the PMDK mounting plate (supplied as an accessory) 56
DK DN 15 65 DIALOCK 2-WAY DIAPHRAGM VALVE DKDM DIALOCK diaphragm valve with male ends for socket welding, metric series PTFE Pack 20 15 10 DKDM020E 67,83 DKDM020F 104,99 DKDM020P 120,83 1 8 03 25 20 10 DKDM025E 73,41 DKDM025F 112,43 DKDM025P 127,34 1 8 03 32 25 10 DKDM032E 86,41 DKDM032F 124,50 DKDM032P 139,42 1 4 04 40 32 10 DKDM040E 101,25 DKDM040F 164,50 DKDM040P 182,07 1 4 04 50 40 10 DKDM050E 131,90 DKDM050F 195,13 DKDM050P 212,73 1 2 04 63 50 10 DKDM063E 159,84 DKDM063F 266,62 DKDM063P 264,82 1 4 02 75 65 10 DKDM075E 191,81 DKDM075F 319,94 DKDM075P 317,78 1 4 02 DKLDM DIALOCK diaphragm valve with stroke limiter and male ends for socket welding, metric series PTFE Pack 20 15 10 DKLDM020E 142,09 DKLDM020F 179,26 DKLDM020P 195,10 1 8 03 25 20 10 DKLDM025E 147,68 DKLDM025F 186,69 DKLDM025P 201,61 1 8 03 32 25 10 DKLDM032E 160,67 DKLDM032F 198,76 DKLDM032P 213,68 1 4 04 40 32 10 DKLDM040E 175,52 DKLDM040F 238,76 DKLDM040P 256,33 1 4 04 50 40 10 DKLDM050E 227,38 DKLDM050F 290,61 DKLDM050P 308,21 1 2 04 63 50 10 DKLDM063E 255,32 DKLDM063F 362,10 DKLDM063P 360,30 1 4 02 75 65 10 DKLDM075E 306,39 DKLDM075F 434,52 DKLDM075P 432,36 1 4 02 E5.16 DKUIM DIALOCK diaphragm valve with female union ends for socket welding, metric series PTFE Pack 20 15 10 DKUIM020E 79,00 DKUIM020F 116,16 DKUIM020P 131,90 1 8 03 25 20 10 DKUIM025E 84,57 DKUIM025F 123,57 DKUIM025P 138,42 1 8 03 32 25 10 DKUIM032E 98,50 DKUIM032F 136,59 DKUIM032P 151,40 1 4 04 40 32 10 DKUIM040E 114,33 DKUIM040F 177,49 DKUIM040P 195,13 1 4 03 50 40 10 DKUIM050E 146,40 DKUIM050F 208,14 DKUIM050P 225,73 1 2 04 63 50 10 DKUIM063E 179,30 DKUIM063F 286,15 DKUIM063P 284,28 1 4 02 57
DK DN 15 65 DIALOCK 2-WAY DIAPHRAGM VALVE DKLUIM DIALOCK diaphragm valve with stroke limiter and female union ends for socket welding, metric series PTFE Pack 20 15 10 DKLUIM020E 153,26 DKLUIM020F 190,42 DKLUIM020P 206,16 1 8 03 25 20 10 DKLUIM025E 158,83 DKLUIM025F 197,84 DKLUIM025P 212,68 1 8 03 32 25 10 DKLUIM032E 172,77 DKLUIM032F 210,86 DKLUIM032P 225,67 1 4 03 40 32 10 DKLUIM040E 188,60 DKLUIM040F 251,76 DKLUIM040P 269,39 1 2 04 50 40 10 DKLUIM050E 241,88 DKLUIM050F 303,62 DKLUIM050P 321,21 1 2 04 63 50 10 DKLUIM063E 274,78 DKLUIM063F 381,63 DKLUIM063P 379,77 1 4 02 DKOM DIALOCK diaphragm valve with flanged monolithic body, drilled PN10/16. Face to face according to EN 558-1 PTFE Pack 20 15 10 DKOM020E 102,71 DKOM020F 139,87 DKOM020P 155,69 1 4 03 25 20 10 DKOM025E 110,34 DKOM025F 149,37 DKOM025P 164,27 1 4 03 32 25 10 DKOM032E 124,61 DKOM032F 162,70 DKOM032P 177,61 1 2 04 40 32 10 DKOM040E 151,60 DKOM040F 214,83 DKOM040P 232,41 1 2 04 50 40 10 DKOM050E 184,56 DKOM050F 247,75 DKOM050P 265,37-1 04 63 50 10 DKOM063E 232,90 DKOM063F 339,71 DKOM063P 337,88-1 04 75 65 10 DKOM075E 302,77 DKOM075F 441,62 DKOM075P 439,24-1 03 DKLOM version available on request 58
DK DN 15 65 DIALOCK 2-WAY DIAPHRAGM VALVE DKOAM DIALOCK diaphragm valve with flanged monolithic body, drilled ANSI B16.5 cl. 150 #FF PTFE Pack 1/2" 15 10 DKOAM012E 102,71 DKOAM012F 139,87 DKOAM012P 155,69 1 4 03 3/4" 20 10 DKOAM034E 110,34 DKOAM034F 149,37 DKOAM034P 164,27 1 4 03 1" 25 10 DKOAM100E 124,61 DKOAM100F 162,70 DKOAM100P 177,61 1 2 04 1" 1/4 32 10 DKOAM114E 151,60 DKOAM114F 214,83 DKOAM114P 232,41 1 2 04 1" 1/2 40 10 DKOAM112E 184,56 DKOAM112F 247,75 DKOAM112P 265,37-1 04 2" 50 10 DKOAM200E 232,90 DKOAM200F 339,71 DKOAM200P 337,88-1 04 2" 1/2 65 10 DKOAM212E 302,77 DKOAM212F 441,62 DKOAM212P 439,24-1 03 DKLOAM version available on request For installation prior to october 2017 please contact Fip Technical Support E5.16 59
VM DN 80 100 The VM is particularly suitable for isolating and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. DIAPHRAGM VALVE Connection system for solvent welding and for flanged joints Optimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the body Handwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torque Standard optical indicator Internal operating components in metal totally isolated from the conveyed fluid Bonnet fastening screws in STAINLESS steel protected against the external environment by PE plugs New flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance Technical specifications Construction Single wear diaphragm valve Size range DN 80 100 PN 10 with water at 20 C Nominal pressure PN 6 with water at 20 C (PTFE version) Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494. Can be coupled to pipes according to EN ISO 15494 Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, EN 558-1, DIN 2501, ANSI B16.5 cl.150 Reference standards Construction criteria: EN ISO 16138, EN ISO 15494 Test methods and requirements: ISO 9393 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318 Valve material Body: Bonnet: PP-GR Handwheel: PA-GR Diaphragm material,, PTFE (on request NBR) Control options Manual control; pneumatic actuator 60
1 2 3 4 6 5 E5.16 1 Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageability 2 Metal optical position indicator supplied as standard 3 Full protection bonnet in PP-GR. Internal circular and symmetrical diaphragm sealing area 4 Diaphragm available in,, PTFE (NBR on request) and easy to replace 5 Threaded metal inserts for anchoring the valve 6 New valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation 61
VM DN 80 100 DIAPHRAGM VALVE VMDM Diaphragm valve with metric plain spigot ends for socket welding PTFE Pack 90 80 *10 VMDM090E 439,25 VMDM090F 753,12 VMDM090P 585,65-1 03 110 100 *10 VMDM110E 583,76 VMDM110F 1.104,28 VMDM110P 764,59-1 02 * PTFE: PN6 Note: male end connectors in and PE100 for socket welding available on request VMOM Diaphragm valve with PN 10/16 flanged monolithic body. Face to face according to EN 558-1 PTFE Pack 90 80 *10 VMOM090E 587,03 VMOM090F 900,89 VMOM090P 733,44-1 02 110 100 *10 VMOM110E 751,76 VMOM110F 1.272,27 VMOM110P 932,59-1 02 *PTFE PN6 VMOAM Diaphragm valve with ANSI B16.5 cl. 150 #FF flanged monolithic body d PN PTFE Pack 3" *10 VMOAM300E 587,03 VMOAM300F 900,89 VMOAM300P 733,44-1 02 4" *10 VMOAM400E 751,76 VMOAM400F 1.272,27 VMOAM400P 932,59-1 02 *PTFE PN6 For installation prior to october 2017 please contact Fip Technical Support 62
CM DN 12 15 The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal for use in confined spaces. COMPACT DIAPHRAGM VALVE Connection system for weld and threaded joints Extremely compact construction Internal operating components in metal totally isolated from the conveyed fluid Valve stem in STAINLESS steel Compressor with floating diaphragm support Easy to replace diaphragm seal Corrosion-proof internal components Innovative CDSA (Circular Diaphragm Sealing Angle) system offering the following advantages: - uniform distribution of shutter pressure on the diaphragm seal - reduction in the tightening torque of the screws fixing the actuator to the valve body - reduced mechanical stress on all valve components (actuator, body and diaphragm) - easy to clean valve interior - low risk of the accumulation of deposits, contamination or damage to the diaphragm due to crystallisation - operating torque reduction E5.16 Technical specifications Construction Compact single wear diaphragm valve Size range DN 12 15 Nominal pressure PN 6 with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494. Can be coupled to pipes according to EN ISO 15494 Thread: ISO 228-1, DIN 2999 Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, EN 558-1, DIN 2501, ANSI B16.5 cl.150 Reference standards Construction criteria: EN ISO 16138, EN ISO 15494 Test methods and requirements: ISO 9393 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318 Valve material Body: Bonnet and handwheel: PA-GR Diaphragm material,, PTFE Control options Manual control; pneumatic actuator 63
1 2 3 4 6 5 1 Handwheel in PA-GR, completely sealed, high mechanical strength with ergonomic grip for optimum manageability 2 Integrated adjustable torque limiter designed to prevent excessive compression of the diaphragm and always guarantee a minimum fluid flow 3 Optical position indicator supplied as standard 4 Bonnet in PA-GR with STAINLESS steel nuts fully protected by plastic plugs to eliminate zones where impurities may accumulate. Internal circular and symmetrical diaphragm sealing area 5 STAINLESS steel bolts, can also be inserted from above 6 Threaded metal inserts for anchoring the valve 64
CM DN 12 15 COMPACT DIAPHRAGM VALVE CMDM Diaphragm valve with metric spigot ends for socket welding PTFE Pack 20 15 6 CMDM020E 80,43 CMDM020F 85,16 CMDM020P 91,91 1 8 04 CMIM Diaphragm valve with metric socket ends for socket welding PTFE Pack 16 12 6 CMIM016E 44,97 CMIM016F 61,28 CMIM016P 68,93 1 8 04 20 15 6 CMIM020E 44,97 CMIM020F 61,28 CMIM020P 68,93 1 8 04 E5.16 CMFM Diaphragm valve with BS parallel threaded socket ends R DN PN PTFE Pack 3/8 12 6 CMFM038E 44,97 CMFM038F 61,28 CMFM038P 68,93 1 8 04 1/2 15 6 CMFM012E 44,97 CMFM012F 61,28 CMFM012P 68,93 1 8 04 65
CM DN 12 15 COMPACT DIAPHRAGM VALVE CMUIM Diaphragm valve with unionised metric socket ends for socket welding *PTFE Pack 20 15 6 CMUIM020E 71,74 CMUIM020F 87,10 CMUIM020P 95,69 1 8 04 * Union O-rings in Note 1: On request threaded ends 1/2 BSP available (CMUFM) Note 2: and PE100 end connectors long spigot for butt welding available on request 66
RV DN 15 100 The RV Sediment strainer limits the passage of any solid particles present in the fluid by means of a strainer. SEDIMENT STRAINER Connection system for weld, threaded and flanged joints Strainer assembled on an easily removed support that facilitates cleaning or replacement Valve material compatibility () with water conveyance, drinking water and other food substances according to current regulations Can be maintained with the valve body installed E5.16 Technical specifications Construction Sediment strainer Size range DN 15 100 Nominal pressure DN 15 50: PN 10 with water at 20 C DN 65: PN 6 with water at 20 C DN 80 100: PN 4 with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494. Can be coupled to pipes according to EN ISO 15494 Thread: ISO 228-1, DIN 2999 Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, EN 558-1, DIN 2501, ANSI B16.5 cl.150 Reference standards Construction criteria: EN ISO 15494 Test methods and requirements: ISO 9393 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318 Valve material Body: Strainer: PP Seal material or 67
RV DN 10 100 SEDIMENT STRAINER RVUIM Sediment strainer with unionised metric socket ends for socket welding Pack 20 15 10 RVUIM020E 49,29 RVUIM020F 53,53 2 20 04 25 20 10 RVUIM025E 61,62 RVUIM025F 66,75 2 20 04 32 25 10 RVUIM032E 74,59 RVUIM032F 78,08 2 10 04 40 32 10 RVUIM040E 81,68 RVUIM040F 90,85 2 6 04 50 40 10 RVUIM050E 89,03 RVUIM050F 104,77 2 6 03 63 50 10 RVUIM063E 122,99 RVUIM063F 144,22 2 4 03 RVIM Sediment strainer with metric socket ends for socket welding Pack 75 65 6 RVIM075E 157,47 RVIM075F 160,74-2 04 90 80 4 RVIM090E 194,84 RVIM090F 206,27-1 04 110 100 4 RVIM110E 356,66 RVIM110F 406,10-1 04 RVUFM Sediment strainer with unionised BS parallel threaded socket ends R DN PN Pack 1/2 15 10 RVUFM012F 56,73 2 20 04 3/4 20 10 RVUFM034F 70,78 2 20 04 1 25 10 RVUFM100F 84,33 2 10 04 1 1/4 32 10 RVUFM114F 96,30 2 6 04 1 1/2 40 10 RVUFM112F 111,04 2 6 03 2 50 10 RVUFM200F 151,41 2 4 03 Note 1: The sediment strainer RVUFM/ might be supplied in RVUIM/ version with 2 threaded sockets included Note 2: Standard filter screen is in, pitch 1,5 mm 68
VR DN 15 80 The VR is an angle seat check valve with weighted piston that allows the passage of fluid in one direction only. CHECK VALVE Connection system for weld, threaded and flanged joints No metal parts in contact with the fluid Piston with counterweight able to work with high intensity fluid Limited pressure drop. Only minimum back pressure is required for the hermetic seal Valve material compatibility () with water conveyance, drinking water and other food substances according to current regulations Can be maintained with the valve body installed E5.16 Technical specifications Construction Angle seat check valve Size range DN 15 80 Nominal pressure DN 15 50: PN 10 with water at 20 C DN 65: PN 6 with water at 20 C DN 80: PN 4 with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494. Can be coupled to pipes according to EN ISO 15494 Thread: ISO 228-1, DIN 2999 Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, EN 558-1, DIN 2501, ANSI B16.5 cl.150 Reference standards Construction criteria: EN ISO 16137, EN ISO 15494 Test methods and requirements: ISO 9393 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318 Valve material Seal material or 69
VR DN 15 80 CHECK VALVE VRUIM Angle seat check valve with unionised metric plain socket ends for socket welding Pack 20 15 10 VRUIM020E 42,20 VRUIM020F 45,65 2 20 04 25 20 10 VRUIM025E 47,74 VRUIM025F 52,32 2 10 04 32 25 10 VRUIM032E 49,57 VRUIM032F 56,74 2 10 04 40 32 10 VRUIM040E 60,24 VRUIM040F 68,99 2 6 04 50 40 10 VRUIM050E 68,16 VRUIM050F 83,42 2 6 03 63 50 10 VRUIM063E 104,15 VRUIM063F 126,80 2 6 02 VRIM Angle seat check valve with metric plain socket ends for socket welding Pack 75 65 6 VRIM075E 233,74 VRIM075F 254,60-2 04 90 80 4 VRIM090E 381,78 VRIM090F 419,10-1 04 VRUFM Angle seat check valve with unionised BS parallel threaded socket ends R DN PN Pack 1/2 15 10 VRUFM012F 48,38 2 20 04 3/4 20 10 VRUFM034F 55,44 2 10 04 1 25 10 VRUFM100F 61,28 2 10 04 1 1/4 32 10 VRUFM114F 73,11 2 6 04 1 1/2 40 10 VRUFM112F 88,46 2 6 03 2 50 10 VRUFM200F 133,12 2 6 02 Note: The Angle Seat Check Valve VRUFM/ might be supplied in VRUIM/ version with 2 threaded sockets included 70
CONNECTIONS CONNECTIONS FOR BALL AND ANGLE SEAT VALVES CVDM End Connector SDR11 in SDR11 long spigot for butt welding or IR-welding d to be used with: Code Pack 20 VKD - VKR - TKD - SR - RV - VR CVDM11020 3,88-350 04 25 VKD - VKR - TKD - SR - RV - VR CVDM11025 4,55-200 04 32 VKD - VKR - TKD - SR - RV - VR CVDM11032 5,59-125 04 40 VKD - VKR - TKD - SR - RV - VR CVDM11040 6,98-120 03 50 VKD - VKR - TKD - SR - RV - VR CVDM11050 9,04-80 03 63 VKD - VKR - TKD - SR - RV - VR CVDM11063 11,62-100 02 75 VKD CVDM11075 23,51-46 02 90 VKD CVDM11090 29,55-25 02 110 VKD CVDM11110 35,81 - - - CVDE End Connector SDR11 in PE100 SDR11 long spigot for butt welding or IR-welding d to be used with: Code Pack 20 VKD - VKR - TKD - SR - RV - VR CVDE11020 See E2 Price List - - - 25 VKD - VKR - TKD - SR - RV - VR CVDE11025 See E2 Price List - - - 32 VKD - VKR - TKD - SR - RV - VR CVDE11032 See E2 Price List - - - 40 VKD - VKR - TKD - SR - RV - VR CVDE11040 See E2 Price List - - - 50 VKD - VKR - TKD - SR - RV - VR CVDE11050 See E2 Price List - - - 63 VKD - VKR - TKD - SR - RV - VR CVDE11063 See E2 Price List - - - 75 VKD CVDE11075 See E2 Price List - - - 90 VKD CVDE11090 See E2 Price List - - - 110 VKD CVDE11110 See E2 Price List - - - E5.16 This article follows the discount of I2-PVCU price list. In case of installation on valves, the whole valve appears to be PN10. 71
CONNECTIONS CONNECTIONS FOR BALL AND ANGLE SEAT VALVES Flanging Set ISO DIN () Standard: DIN 2501 - EN 1092, face to face according to EN558-1 (VKD only). Set composition: 1 flange, 1 locking ring, 1 nut d to be used with: Code Pack 20 VKD - VKR - TKD - SR - RV - VR SETFLOM020 28,17-50 04 25 VKD - VKR - TKD - SR - RV - VR SETFLOM025 32,58-37 04 32 VKD - VKR - TKD - SR - RV - VR SETFLOM032 35,76-29 04 40 VKD - VKR - TKD - SR - RV - VR SETFLOM040 47,38-14 04 50 VKD - VKR - TKD - SR - RV - VR SETFLOM050 49,28-24 03 63 VKD - VKR - TKD - SR - RV - VR SETFLOM063 62,97-14 03 Note: factory assembled Flanging Set ANSI () Standard: ANSI B16.5 cl.150#ff. Set composition: 1 flange, 1 locking ring, 1 nut d to be used with: Code Pack 1/2" VKD - VKR - TKD - SR - RV - VR SETFLOAM012 28,17-50 04 3/4" VKD - VKR - TKD - SR - RV - VR SETFLOAM034 32,58-37 04 1" VKD - VKR - TKD - SR - RV - VR SETFLOAM100 35,76-29 04 1"1/4 VKD - VKR - TKD - SR - RV - VR SETFLOAM114 47,38-14 04 1"1/2 VKD - VKR - TKD - SR - RV - VR SETFLOAM112 49,28-24 03 2" VKD - VKR - TKD - SR - RV - VR SETFLOAM200 62,97-14 03 Note: factory assembled Flanging Set ISO DIN-ANSI () Standard: EN1092/DIN2501 and ANSI B16.5 cl.150#ff face to face according to EN558-1. Set composition: 1 socket flange, 1 spigot end connector, 1 nut d to be used with: Code Pack 75-2"1/2 VKD SETFLOM075 140,25 1 5 04 90-3" VKD SETFLOM090 170,41 - - - 110-4" VKD SETFLOM110 199,13 1 4 02 Note: factory assembled 72
CONNECTIONS CONNECTIONS FOR BALL AND ANGLE SEAT VALVES ENDIM Standard: ISO metric plain socket for socket welding* d to be used with: Code Pack 16 VKD - VKR - TKD - SR - RV - VR ENDIM016 8,21 - - - 20 VKD - VKR - TKD - SR - RV - VR ENDIM020 8,21 - - - 25 VKD - VKR - TKD - SR - RV - VR ENDIM025 9,77 - - - 32 VKD - VKR - TKD - SR - RV - VR ENDIM032 10,8 - - - 40 VKD - VKR - TKD - SR - RV - VR ENDIM040 13,34 - - - 50 VKD - VKR - TKD - SR - RV - VR ENDIM050 15,35 - - - 63 VKD - VKR - TKD - SR - RV - VR ENDIM063 19,44 - - - 75 VKD ENDIM075 46,06 - - - 90 VKD ENDIM090 50,26 - - - 110 VKD ENDIM110 69,79 - - - *One piece ENDDM Standard: ISO metric plain spigot for socket welding* E5.16 d to be used with: Code Pack 20 VKD - VKR - TKD - SR - RV - VR ENDDM020 8,21 - - - 25 VKD - VKR - TKD - SR - RV - VR ENDDM025 9,77 - - - 32 VKD - VKR - TKD - SR - RV - VR ENDDM032 10,8 - - - 40 VKD - VKR - TKD - SR - RV - VR ENDDM040 13,34 - - - 50 VKD - VKR - TKD - SR - RV - VR ENDDM050 15,35 - - - 63 VKD - VKR - TKD - SR - RV - VR ENDDM063 19,44 - - - 75 VKD - VKR - TKD - SR - RV - VR ENDDM075 46,06 - - - 90 VKD ENDDM090 50,26 - - - 110 VKD ENDDM110 69,79 - - - *One piece 73
CONNECTIONS CONNECTIONS FOR BALL AND ANGLE SEAT VALVES ENDFM Standard: BS parallel socket threaded* R to be used with: Code Pack 3/8" VKD - VKR - TKD - SR - RV - VR ENDFM038 8,21 - - - 1/2" VKD - VKR - TKD - SR - RV - VR ENDFM012 8,21 - - - 3/4" VKD - VKR - TKD - SR - RV - VR ENDFM034 9,77 - - - 1" VKD - VKR - TKD - SR - RV - VR ENDFM100 10,8 - - - 1"1/4 VKD - VKR - TKD - SR - RV - VR ENDFM114 13,34 - - - 1"1/2 VKD - VKR - TKD - SR - RV - VR ENDFM112 15,35 - - - 2" VKD - VKR - TKD - SR - RV - VR ENDFM200 19,44 - - - *One piece ENDNM Standard: NPT tapered socket threaded* R to be used with: Code Pack 1/2" VKD - VKR - TKD - RV - SR- VR ENDNM012 8,21 - - - 3/4" VKD - VKR - TKD - RV - SR- VR ENDNM034 9,77 - - - 1" VKD - VKR - TKD - RV - SR- VR ENDNM100 10,8 - - - 1"1/4 VKD - VKR - TKD - RV - SR- VR ENDNM114 13,34 - - - 1"1/2 VKD - VKR - TKD - RV - SR- VR ENDNM112 15,35 - - - 2" VKD - VKR - TKD - RV - SR- VR ENDNM200 19,44 - - - *One piece 74
CONNECTIONS SPARE END CONNECTORS FOR TRUE UNION DIAPHRAGM VALVES Q/BIGM union end for socket welding, metric series * d to be used with: Code Pack 20 CM-DK-DKL-DKP-DKM QBIGM020 2,50 - - - 25 DK-DKL-DKP-DKM QBIGM025 2,53 - - - 32 DK-DKL-DKP-DKM QBIGM032 2,68 - - - 40 DK-DKL-DKP-DKM QBIGM040 3,32 - - - 50 DK-DKL-DKP-DKM QBIGM050 3,98 - - - 63 DK-DKL-DKP-DKM QBIGM063 4,23 - - - * One piece Q/BBE-L End connector SDR11 in PE100 SDR11 long spigot for butt welding or electrofusion * d Per utilizzo con valvole serie: Codice Pack Q.tà Cartone Tipo Cartone 20 CM - DK - DKL - DKP - DKM - DKD QBBEL11020 See EE price list 1 - - E5.16 *One piece Q/BBM-L Union End long spigot for butt welding, for BBM-L union* d PN10 SDR 11 - S 5 Pack 20 QBBML11020 See EB price list - 30 K07 25 QBBML11025 See EB price list - 30 K01 32 QBBML11032 See EB price list - 30 K01 40 QBBML11040 See EB price list - 30 K02 50 QBBML11050 See EB price list - 25 K02 63 QBBML11063 See EB price list - 15 K02 75 QBBML11075 See EB price list - 10 K03 90 QBBML11090 See EB price list - 5 K04 110 QBBML11110 See EB price list - 5 K05 *One piece 75
CONNECTIONS SPARE END CONNECTORS FOR TRUE UNION DIAPHRAGM VALVES Q/BBM-C Union End short spigot for butt welding, for BBM-C union d PN10 SDR 11 - S 5 Pack 20 QBBMC11020 See EB price list - 30 K07 25 QBBMC11025 See EB price list - 30 K01 32 QBBMC11032 See EB price list - 30 K01 40 QBBMC11040 See EB price list - 30 K02 50 QBBMC11050 See EB price list - 25 K02 63 QBBMC11063 See EB price list - 15 K02 75 QBBMC11075 See EB price list - - K02 90 QBBMC11090 See EB price list - - K02 110 QBBMC11110 See EB price list - - K05 76