Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1
pitch. RSV 1. S Derating curve RSV1. S SN Rectangular two part PCB connector system with solder contacts. High connection density achieved by using several rows of pins which mate with crimp contacts. The two part connectors, in. pitch, can be coded and locked to the mating connector. 3. and. solder pin lengths available. Supplied in cardboard box. V (IEC) / 3V (U) 1A (IEC) / A (U) RSV1. S / RSV1. CB / H7V-K1. 1 1 Conductor current to EN 97-7-1 1 min. No. of poles (-pole) +7, +.99" 11,." +13, +.3",.173" Technical data Rated data to IEC -1 / IEC 19 Clamping range, max. Solid H(7) V-U Stranded H7 V-R Flexible H(7) V-K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade according to norm Tightening torque range Nm Rated current at ambient temperature C C A 1 Overvoltage category III III II Pollution severity 3 Rated voltage V 3 Rated impulse voltage kv.. a U 1977 rated data - E9 Rated voltage V 3 Rated current A r CSA C. rated data - R 397 Rated voltage V 3 Rated current A 13 Material data Type of insulating material Wemid (PA) Flaability class acc. U9 V- Contact base material Cu alloy Material of contact surface tinned Information Additional colours on request Rated current related to rated cross-section and min. No. of poles. Spacing between rows: see hole layout Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. 1 RSV1. S / RSV1. CB / HV-K. min. No. of poles (-pole) Conductor current to EN 97-7-1 1 RSV1. S / RSV1. CB / H7V-K. Conductor current to EN 97-7-1 Solder pin length 3.. Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 1 113. (.39) 1 11 9. (.39) 1 1. (.91) 13 11 1. (.9) 1 117. (.9) 1 11 3. (1.7) 1 119.
RSV1. SF SN Accessories Drilling diagrams -pole pitch. Coding -pole..9" +7, +.99" +13, +.3" 11,." +17, +.9",.173" 9-pole..9" Solder pin length 3.. -pole 1-pole 7..37".13" Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 19 1139. (.39) 119 119 9. (.39) 9 119 1. (.91) 139 119 1. (.9) 19 1179. (.9) 19 119 3. (1.7) 19 1199 -pole 7..9" 7..37".13" 3-pole 7..9" 7..37.13".3
pitch. RSV 1. B Derating curve RSV1. B SN Rectangular two part connector system with solder contacts for PCB applications. High connection density achieved by using several rows of pin mating with crimp contacts. The two part connectors, in. pitch, can be coded and locked to the mating connector. 3. and. solder pins available. Supplied in cardboard box. V (IEC) / 3V (U) 1A (IEC) / A (U) RSV1. B / RSV1. CS / H7V-K1. 1 1 Conductor current to EN 97-7-1 1 min. No. of poles (-pole) +7, +.99" 1,3.3" +, +.33",.17" Technical data Rated data to IEC -1 / IEC 19 Clamping range, max. Solid H(7) V-U Stranded H7 V-R Flexible H(7) V-K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade according to norm Tightening torque range Nm Rated current at ambient temperature C C A 1 Overvoltage category III III II Pollution severity 3 Rated voltage V 3 Rated impulse voltage kv.. a U 1977 rated data - E9 Rated voltage V 3 Rated current A r CSA C. rated data - R 397 Rated voltage V 3 Rated current A 13 Material data Type of insulating material Wemid (PA) Flaability class acc. U9 V- Contact base material Cu alloy Material of contact surface tinned Information Additional colours on request Rated current related to rated cross-section and min. No. of poles. Spacing between rows: see hole layout Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. RSV1. B / RSV1. CS / HV-K. min. No. of poles (-pole) 1 Conductor current to EN 97-7-1 RSV1. B / RSV1. CS / H7V-K. Conductor current to EN 97-7-1 Solder pin length 3.. Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 13 1133. (.39) 113 113 9. (.39) 3 113 1. (.91) 133 113 1. (.9) 13 1173. (.9) 13 113 3. (1.7) 13 1193.
RSV1. BF SN Accessories Drilling diagrams -pole pitch. Coding -pole..9" +7, +.99" +, +.33" 1,3.3" +17, +.9",.17 9-pole..9" Solder pin length 3.. -pole 1-pole 7..37".13" Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 17 1137. (.39) 117 117 9. (.39) 7 117 1. (.91) 137 117 1. (.9) 17 1177. (.9) 17 117 3. (1.7) 17 1197 -pole 7..9" 7..37".13" 3-pole 7..9" 7..37.13".
pitch. RSV 1. S Derating curve RSV1. S AU Rectangular two part PCB connector system with solder contacts. High connection density achieved by using several rows of pins which mate with crimp contacts. The two part connectors, in. pitch, can be coded and locked to the mating connector. 3. and. solder pin lengths available. Supplied in cardboard box. V (IEC) / 3V (U) 1A (IEC) / A (U) RSV1. S / RSV1. CB / H7V-K1. 1 1 Conductor current to EN 97-7-1 1 min. No. of poles (-pole) +7, +.99" 11,." +13, +.3",.173" Technical data Rated data to IEC -1 / IEC 19 Clamping range, max. Solid H(7) V-U Stranded H7 V-R Flexible H(7) V-K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade according to norm Tightening torque range Nm Rated current at ambient temperature C C A 1 Overvoltage category III III II Pollution severity 3 Rated voltage V 3 Rated impulse voltage kv.. a U 1977 rated data - E9 Rated voltage V 3 Rated current A r CSA C. rated data - R 397 Rated voltage V 3 Rated current A 13 Material data Type of insulating material Wemid (PA) Flaability class acc. U9 V- Contact base material Cu alloy Material of contact surface gold-plated Information Additional colours on request Rated current related to rated cross-section and min. No. of poles. Spacing between rows: see hole layout Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. 1 RSV1. S / RSV1. CB / HV-K. min. No. of poles (-pole) Conductor current to EN 97-7-1 1 RSV1. S / RSV1. CB / H7V-K. Conductor current to EN 97-7-1 Solder pin length 3.. Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 1 113. (.39) 11 11 9. (.39) 11 1. (.91) 13 11 1. (.9) 1 117. (.9) 1 11 3. (1.7) 1 119.
RSV1. SF AU Accessories Drilling diagrams -pole pitch. Coding -pole..9" +7, +.99" +13, +.3" 11,." +17, +.9",.173" 9-pole..9" Solder pin length 3.. -pole 1-pole 7..37".13" Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 1 113. (.39) 11 11 9. (.39) 11 1. (.91) 13 11 1. (.9) 1 117. (.9) 1 11 3. (1.7) 1 119 -pole 7..9" 7..37".13" 3-pole 7..9" 7..37.13".7
pitch. RSV 1. B Derating curve RSV1. B AU Rectangular two part connector system with solder contacts for PCB applications. High connection density achieved by using several rows of pin mating with crimp contacts. The two part connectors, in. pitch, can be coded and locked to the mating connector. 3. and. solder pins available. Supplied in cardboard box. V (IEC) / 3V (U) 1A (IEC) / A (U) RSV1. B / RSV1. CS / H7V-K1. 1 1 Conductor current to EN 97-7-1 1 min. No. of poles (-pole) +7, +.99" 1,3.3" +, +.33",.17" Technical data Rated data to IEC -1 / IEC 19 Clamping range, max. Solid H(7) V-U Stranded H7 V-R Flexible H(7) V-K Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade according to norm Tightening torque range Nm Rated current at ambient temperature C C A 1 Overvoltage category III III II Pollution severity 3 Rated voltage V 3 Rated impulse voltage kv.. a U 1977 rated data - E9 Rated voltage V 3 Rated current A r CSA C. rated data - R 397 Rated voltage V 3 Rated current A 13 Material data Type of insulating material Wemid (PA) Flaability class acc. U9 V- Contact base material Cu alloy Material of contact surface gold-plated Information Additional colours on request Rated current related to rated cross-section and min. No. of poles. Spacing between rows: see hole layout Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. RSV1. B / RSV1. CS / HV-K. min. No. of poles (-pole) 1 Conductor current to EN 97-7-1 RSV1. B / RSV1. CS / H7V-K. Conductor current to EN 97-7-1 Solder pin length 3.. Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 113. (.39) 1 1 9. (.39) 1 1. (.91) 13 11 1. (.9) 117. (.9) 11 3. (1.7) 1 119.
RSV1. BF AU Accessories Drilling diagrams -pole pitch. Coding -pole..9" +7, +.99" +, +.33" 1,3.3" +17, +.9",.17 9-pole..9" Solder pin length 3.. -pole 1-pole 7..37".13" Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 1 113. (.39) 11 11 9. (.39) 11 1. (.91) 13 11 1. (.9) 1 117. (.9) 1 11 3. (1.7) 1 119 -pole 7..9" 7..37".13" 3-pole 7..9" 7..37.13".9
Male and female connectors with crimp connection pitch. RSV 1. C Derating curve RSV1. CS Rectangular two part connector system for use with crimp contacts. Can be used as universal coupling, and also available as a PCB variant. The CS 1. or CB 1. crimp contacts guarantee a high connection density. The two part connectors can be coded and locked to the mating connector. Supplied in cardboard box..13-3.31 (IEC) / - AWG (U) 3 V (IEC) / V (U) 17 A (IEC) / A (U) RSV1. CB / RSV1. CS / H7V-K1. Conductor current to EN 97-7-1 1 1 1 min. No. of poles (-pole) Technical data Rated data to IEC -1 / IEC 19 Clamping range, max..13 3.31 Solid H(7) V-U Stranded H7 V-R Flexible H(7) V-K.. Flexible with ferrule Ferrule with plastic collar Stripping length Screwdriver blade according to norm Tightening torque range Nm Rated current at ambient temperature C C A 17 1 Overvoltage category III III II Pollution severity 3 Rated voltage V 3 Rated impulse voltage kv a U 1977 rated data - E9 Rated voltage V Rated current A - r CSA C. rated data - R 397 Rated voltage V Rated current A 13 - Material data Type of insulating material Wemid (PA) Flaability class acc. U9 V- Contact base material Cu alloy Material of contact surface Information Additional colours on request Rated current related to rated cross-section and min. No. of poles. Spacing between rows: see hole layout Rated cross-section depends on crimp contact used. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. RSV1. CB / RSV1. CS / HV-K. min. No. of poles (-pole) Conductor current to EN 97-7-1 1 RSV1. CB / RSV1. CS / H7V-K. Conductor current to EN 97-7-1 Solder pin length Colour grey Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 113. (.39) 11 9. (.39) 11 1. (.91) 11 1. (.9) 117. (.9) 11 3. (1.7) 119.
Male and female connectors with crimp connection RSV1. CB Accessories Mounting cutout pitch. Coding Cable grip Solder pin length Colour grey Spring clips ensure firm hold in enclosure wall Clip-on foot b R, max. a Mounting cutout for enclosure RSV 1. Wall thickness 1.. Crimping tool No. of poles Dim. a ()* Dim. b ()*.3 17..1 1.1 Pitch. Poles (inch) Qty. Order No. Order No.. (.197) 113. (.39) 11 9. (.39) 1 1. (.91) 11 1. (.9) 117. (.9) 11 3. (1.7) 119 9.1 1.1 3.. 1....3 3..3 *) Tolerance: +.3 Extractor Tool.11
Crimp contacts pitch. Contact system CB 1. / CS 1. CB 1. / CS 1. Crimp contacts.17"..11" CB.17" 7. 1.7" CS.17".7 1.13" Tinned contacts CS For cable size Insulation diameter AWG.1,. 1. pin standard.3. 1.1 1. pin standard.3... pin standard.7 1. 1 1.. pin standard.7 1. 1 1. 3. pin standard. 1. 3. pin standard. 1.. pin standard Separate contacts Cont. on a strip Order No. Qty. Order No. Qty. 1 17 19 19 1 3 3 37 17 39 3 7 1 9 7 7 77 1 79 7 17 1 3 13 13 3 13 1 3 9 9 3 97 17 3 99 9 3 13 13 3 139 1 3 17 1 3 Gold-plated contacts defined contact points ensure high contact stability ugs in the enclosing steel spring ensure the contact engages securely in the housing Up to plugging cycles (gold version) Up to plugging cycles (tin version) For cable sizes Insulation diameter AWG.1 -. -. - 1. pin standard.3 -. - 1.1-1. pin standard.3 -. -. -. pin standard.7-1. 1-1. -. pin standard.7-1. 1-1. - 3. pin standard. 1 -. - 3. pin standard. 1 -. -. pin standard Separate contacts Cont. on a strip Order No Qty. Order No Qty. 7 1 9 7 1 9 7 1 9 7 179 9 1 1 3 133 13 3 1 1 3 3 7 17 3 9 3 19 13 3 137 13 3 1 1 3.
Crimp contacts Accessories pitch. Crimping tool see Accessories chapter Removal tool see Accessories chapter.13
pitch..1