Rectangular Linear LED High Bay DESCRIPTION: Touch-Plate s Rectangular Linear High Bay was designed to provide higher lumens and even light distribution. With energy savings of up to 70% over traditional lighting, the Rectangular Linear High Bay is optimal for new construction and retrofit installations. PRODUCT FEATURES: Steel Body Frame Flicker Free Isolated Driver Multiple Mounting Options Lifetime of 50,000 hrs or greater UL & DLC Premium Listed 5 Year Limited Warranty SPECIFICATIONS: Wattage: 80W, 110W, 140W, 165W, & 220W IP Rating: IP20 LED Chips: Jufei 2835 PF: >0.9 PHYSICAL PARAMETERS: Dimensions Length: 23.82 (80, 110, 140, 165, & 220W) Depth: 3.78 (All Models) Width: 12.60 (80, 110, 140, 165, & 220W) Weight 10.37lbs (80 & 110W) 12.13lbs (140, 165, & 220W) 1830 Wayne Trace, Fort Wayne, IN 46803
DLC/UL INFORMATION (if applicable) Touch-Plate s Part Number DLC File # UL File # Watts Nominal Lumens Delivered Lumens THR2Z-EN080-F40CW THR2Z-EN080-D40CW E493410 80 10,400 9,631 4000 THR2Z-EN080-F50CW THR2Z-EN080-D50CW E493410 80 10,400 10,091 5000 THR2Z-FW110-F40CW THR2Z-FW110-D40CW E493410 110 14,300 15,909 4000 THR2Z-FW110-F50CW THR2Z-FW110-D50CW E493410 110 14,300 16,073 5000 THR2Z-HB140-F40CW TS-HB3-140W(4000K) E468007 140 18,200 17,154 4000 THR2Z-HB140-F50CW TS-HB3-140W(5000K) E468007 140 18,200 17,373 5000 THR2Z-ID165-F40CW TS-HB3-165W(4000K) E468007 165 21,400 20,025 4000 THR2Z-ID165-F50CW TS-HB3-165W(5000K) E468007 165 21,400 20,845 5000 THR2Z-KP220-F40CW TS-HB3-220W(4000K) E468007 220 28,600 30,316 4000 THR2Z-KP220-F50CW TS-HB3-220W(5000K) E468007 220 28,600 30,684 5000 The X s in Touch-Plate s Part Number are filled in via the ordering information table below. CCT ORDERING INFORMATION TPT LED Type Beam Angle Lumens Watts Voltage CCT Lens Material Housing Color X XXX X -XX XXX -X XX X X T: TPT HR2: Rectangular Linear High Bay 2 Z: 120 EN:10,400 FW:14,300 HB:18,200 ID:21,400 KP:28,600 080:80W 110:110W 140:140W 165:165W 220:220W F: 120-277V 40: 4000K 50: 5000K C: Milky PC W: White This table is just for reference. Please verify current option availability with Touch-Plate. 1830 Wayne Trace, Fort Wayne, IN 46803
INCLUDED ACCESSORIES Suspended Chain (44 /1.12m) ACCESSORIES (ORDERED SEPARATELY) Wire Guard Emergency Backup Occupancy Sensor Zigbee Relay Zigbee Dimmer Zigbee Controller MOUNTING ACCESSORIES (ORDERED SEPARATELY) Stainless Steel Cable: 2ft/.5m, 3ft/1m, 7ft/2m, 10ft/3m, or 20ft/6m Lock Twist Plug: 3ft/1m or 10ft/3m No Plug Extension: 3ft/1m or 10ft/3m 3 Prong Plug: 7ft/2m S Hook Clip: Medium or Large Stainless Steel Magnetic O Hook
HANGING INSTALLATION INFORMATION This product must be installed in accordance with National Electrical Code (NEC) and/or applicable local codes, by a qualified electrician. DANGER - RISK OF SHOCK - DISCONNECT POWER BEFORE INSTALLATION Rectangular Linear LED High Bay s can be ordered with a specific twist lock plug or without a plug. 1. Insert the hook into the slotted holes. 2. Hook both of the chains onto the ceiling anchors. 3. Turn off the power and make the wiring connections with a terminal cap. Plug in the High Bay OR make the necessary HOT (Black or Brown), NEUTRAL (White or Blue), and GROUND (Green) connections into an approved junction box. 4. Insert the terminal cap and wires into the driver, then install the wire terminal joint into the wire entry.
DIRECT INSTALLATION INFORMATION This product must be installed in accordance with National Electrical Code (NEC) and/or applicable local codes, by a qualified electrician. DANGER - RISK OF SHOCK - DISCONNECT POWER BEFORE INSTALLATION Rectangular Linear LED High Bay s can be ordered with a specific twist lock plug or without a plug. 1. Affix the junction box to the LED fixture with the provided hardware. 2. Affix the LED fixture onto a steeve with the provided hardware. 3. Turn off the power and make the wiring connections with a terminal cap. Plug in the High Bay OR make the necessary HOT (Black or Brown), NEUTRAL (White or Blue), and GROUND (Green) connections into an approved junction box. 4. Attach both of the faceplates onto the junction box with the provided hardware.