Welcome to landscape for landscape lighting GARDENS BY THE BAY, SINGAPORE Location:Singapore Lighting Design:Lighting Planners Associates
Outdoor Strip Light LFXK for landscape lighting KINU is an indirect light fixture that bends freely which delivers subtle brightness. Slight brightness is sufficient for outdoor nightscape. KINU will allow you to create an eye-catching outdoor ambience. Application Handrail lighting / Foot lights for stairs / Under bench lighting Handrail lighting Foot lights for stairs Under bench lighting GARDENS BY THE BAY, SINGAPORE Location:Singapore Lighting Design:Lighting Planners Associates LFXK
Outdoor Outdoor Strip Light LFXK Panorama Location: Singapore Photo: Robert Such Optimized more for semi-outdoor Features Semi-diffused Compared with normal FLEX α, KINU can emit more dot-free light. When looking up the stairs etc, there is no light of the dot, and you can direct a space with a more luxurious feeling. FLEX α KINU FLEX α F milky tube IP65 with improved waterproof structure 3 step barrier by special glue metal nut waterproof connector Coated circuit board for prevention against humidity FLEX α F clear tube Fuse on circuit board against unexpected over current Landscape optimized installation Designed to solve various problems occurring during construction depending on the bending rails of aluminum. Bending Rail attachable to a curve The aluminum rail can pass the wiring for another system inside easy installation by mounting clip Long wiring distance Due to special circuit design, long wiring maximum 75 m is possible (VCTF 0.75 sq). Wiring 80 m Fixture 5 m PSU Compact size and custom order length 5 mm 6 mm 7. mm Compact size mm increments Custom order length min: mm max: 5.0 m 00 kinds length difference! LFXK 3
LFXK Linear light with semi diffused acrylic tube NEW Model No. LFXK - T - - DF - O T Product Name LFXK Length Lead wire Light source color Tube type Environment Custom order length W : Both ends lead wire S : One end lead wire W : White L30 : Warm white 0K L7 : Warm white 700K L4 : Warm white 400K DF : Diffuser O : Outdoors Light Intensity LFXK-T000-L7-DF-O / illuminance angle 6 38 9 000 0 00 4 0 3m 0 3 Specification Model No. Power consumption Fitting length(l) LFXK-T000S/W--DF-O 4.8 W/m 06mm(W) / 0mm(S) Weight - Luminaire efficacy(700k) Light source color D N W WW L30 L7 L4 L L9 700K 5K 4K 30K 0K 700K 400K 00K 900K Ra 87 Ra 87 Ra 87 Ra 77 46.5 lm/w (Equivalent) = Device inventory = Equivalent = Please contact us since it is made-to-order products and has MOQ. 70 lm 60 lm 3 lm 43 lm Specification may be subject to change without announcement. The optical data provided on the each product pages are for reference only; the data values are not guaranteed. Please use as reference materials for your planning. Custom order products size (4.8 W/m) Corresponds to Length of Model No. and External dimensions 048 046 3044 404 00 098 096 3094 409 48 46 344 44 98 96 394 49 48 46 344 44 99 97 95 393 49 349 347 345 3343 434 399 397 395 3393 439 449 447 445 3443 444 499 497 495 3493 449 549 547 545 3543 454 599 597 595 3593 459 649 647 645 3643 464 699 697 695 3693 469 749 747 745 3743 474 798 796 794 379 4790 848 846 844 384 4840 898 896 894 389 4890 948 946 944 394 4940 000 996 994 399 4990 General Specification Input voltage Environment Max. length per circuit Min. bending range Material (body) Attachments - DC4V Outdoors (no condensation) IP65 5m Rmm Soft acrylic Option parts Mounting rail Power supply cable Certification - Dimmable Power Supplies Required Max. connectable length per power supply Length of LED fixture (70% loading factor) : split into multiple circuits Power supply 7.3 m W power supply.6 m 00W power supply 8.9 m W power supply External dimensions / both ends lead wire top view side view 43 5 Length +6 9. 6.0 6.0 7.7 φ Power supply side / one end lead wire top view 5. 5. 5 side view 43 5 Length + 9. 6.0.0 7.7 φ 5 Power supply side 4.0 Connect to the next φ 4 LFXK
Optional parts Mounting lift rail 000 for FLEX α KINU Option Parts Model No : LFXK-RL000AL-A - Bendable aluminum rail - The connector can be stored in this mounting rail. - 0 pcs/ bag of Mounting clip for FLEX α KINU AL rail(lfxk-pt-a) is attached. 8.6 Screw hole:3xφ3 φ5(cable) φ(connector) pan head screw M5 7. Outdoor Outdoor Strip Light LFXK 7. 3x7 958 5 6.0 5.0 40x 39x Mounting clip for FLEX α KINU lift rail Attachment Model No : LFXK-PT-A 0pcs/bag Mounting Clip is used for assembling rail and light fixture. 5 0 9.7 4.3 Power supply cable 0m for AH connector OD 5.0 Option Parts Required Model No : CAD-VB00M-FJNN-O pcs per circuit for connecting the LED fixture to power supply or dimmer driver. 4.0 0,000 φ Prohibited installation places Caution: 45 When using FLEX α KINU in semi-outdoor, it must be installed with the aluminum rail for FLEX α KINU. Please installed the LED fixture and the cable within the range of 45 eaves of the roof and mm or more away from the ground or the floor. Please do not install the LED fixture and cables in the following place: Do not cut the LED fixture and the lead wire of outdoor product at a job site. Please do appropriate treatment for the lead wire and connector of the terminal of outdoor LED fixture. mm or more Ground / Floor - water directly fall on or pooled - the sunlight directly shines on - liquids including chlorine or chemicals fall on - high temperature and high humidity such as saunas - coastal areas which are affected by sea spray LFXK 5
Installing the product For horizontal installation Fix Mounting rail with screws supplied by installer (Pan head screws M5). LED fixture and Mounting rail can be bent horizontally at minimum radius mm. Please fix with the same number of screws as the number of screw holes. Option Parts Mounting lift rail 000 for FLEX α KINU (LFXK-RL000AL-A ) min.r mm OK Cautions Do not bend LED fixture and Mounting rail vertically and do not twist the LED fixture. LED fixture and Mounting rail might be damaged when it is twisted and bent improperly. NG Attach Mounting clips for rail to Mounting rail every 00mm as below picture. (Recommended number of clips: 3pcs for mm, 6pcs for 600mm, 0pcs for 000mm) Installation of Mounting clip Tilt and hook one side of Mounting clip to Mounting rail, rotate clips and insert another side of clip until click sounds. 00 mm 00 mm Click! Attachment Mounting clip for FLEX α KINU lift rail (LFXK-PT-A) 3 Check the direction of emitting surface and insert LED fixture into Mounting clips. Installation of LED fixture in Mounting clip Insert LED fixture until the position as below. Cautions Please be careful not to push LED fixture hardly and damage LED fixture, electric parts, circuit board by finger or tools. It might cause a defect. LED fixture 4 Connect the connector attached with LED fixture and the connector of power supply cable in proper position. Make sure to rotate the fastening part until no longer can rotate. Option Parts Power supply cable 0m for AH connector OD 5.0 (CAD-VB00M-FJNN-O ) 6 LFXK
For installing on sloping surface Fold the side of Mounting rail under Mounting clip by hand. Push Outdoor Outdoor Strip Light LFXK Fold by hand Push Cautions Make sure to do this procedure. Otherwise, it may cause slipping and falling of LED fixture from Mounting rail and clips. Adjust the position of Mounting clips being hooked at the folded part of Mounting rail to avoid falling. Mounting clip is hooked at the folded rail NG 45 Cautions This product cannot be used in vertical installation. Do not install LED fixture and Mounting rail more than 45 degree. The mounting clip might slip and LED fixture might drop from Mounting rail. OK OK Connecting to the power supply Cables used for connecting LED fixtures and Power supply must be a suitable type and gauge. Cables should be joined with suitable terminal block or methods as appropriate to the installation and operating environment. Caution: When using a long cable with thin dimension, the resistance of cable will increase. Voltage drop and heat dispatching may occur and result in brightness decreasing. Caution: When separating one cable to multiple circuits in the same gauge, the current loading focuses on the junction of the branch circuit and high temperature will liberate on there. Please consider the loading of the power supply (quantity of LED fixture) and review the wiring system to avoid the above problem. When connecting the dimmer driver with power supply, unpredicted noise might occur. It is a characteristic of electronic devices, not a malfunction of the LED fixture. Please choose an appropriate power supply and consider a place to install. Reducing the loading factor of LED fixture might improve the noise from the power supply while the noise for the LED fixtures might be improved by splitting the circuit of LED fixtures into multiple. When you adjust the length of the power supply cable, please be careful not to damage the core wire. System configuration diagram The number of LED fixtures that can be connected to the power supply depends on the output (W) of the power supply. For Luci FLEX α KINU, the maximum number connectable in series is 5 m. If more than the maximum number must be connected, connect in separate systems. Cable Max. length( ) UL464 AWG0 45 m VCTF 0.75sq 80 m Wiring / up to m LED fixture lengths can be combined freely; however, the maximum number of meters connectable in series (5 m) must be strictly observed. Small noise may be emitted from the appliance and the dimmer while using the dimmer, but it is normal. Load capacity of 60% is recommended to reduce noise. (nomal operation: 70%) Power supply DC4V LED fixture / up to 5m Circuit 3 Option Parts Power supply cable 0m for AH connector OD 5.0 (CAD-VB00M-FJNN-O ) Circuit Circuit LFXK 7
Direct horizontal surface light intensity distribution chart LFXK-T000-W-DF-O Light source color 4K Brightness 47 cd Luminous flux 70 lm Color rendering index Ra 87 LFXK-T000-L30-DF-O Light source color 0K Brightness 45 cd Luminous flux 60 lm Color rendering index Ra 87 LFXK-T000-L7-DF-O Light source color 700K Brightness 38 cd Luminous flux 3 lm Color rendering index Ra 87 / illuminance angle 6 47 000 0 00 5 0 3m 0 3 / illuminance angle 6 45 000 0 00 5 0 3m 0 3 / illuminance angle 6 38 9 000 0 00 4 0 3m 0 3 Recommendend dimensions and illumination distribuitions Steps 00 00 00 00 70mm 8mm mm LFXK-T000-L4-DF-O Light source color 400K Brightness 4 cd Luminous flux 43 lm Color rendering index Ra 77 / illuminance angle 6 4 0 000 0 00 4 0 3m 0 3 Handrail 00mm 40mm 8mm 700mm 00 80 70 60 September.08