Operating Tools Operating tool with partially insulated shaft, ideal for operating terminal blocks Insulated multipole operating tools for front-entry terminal blocks Operating tool (DIN 524), ideal for terminal blocks with CAGE CLAMP Operating tool with partially insulated shaft, Series 210-719 1 Operating tool with partially insulated shaft, 210-720 1 Operating tool with partially insulated shaft, 210-721 1 Set of operating tools with partially insulated shafts, 210-722 1 Operating tool, insulated, 1-pole 209-129 1 2-pole 279-432 1 3-pole 279-433 1 279-440 1 1-pole 209-130 1 2-pole 280-432 1 3-pole 280-433 1 4-pole 280-434 1 5-pole 280-435 1 280-43 1 280-437 1 280-438 1 9-pole 280-439 1 280-440 1 5-pole 281-440 1 *only 1- and 2-pole **only up to 3-pole Operating tool, 210-47 1 Operating tool, angled, 210-48 1 Operating tool, 210-57 1 Operating tool, angled, 210-58 1 Commoning front-entry disconnect terminal blocks via
Operating Tools Test and Measurement Tools Operating tool for TOPJOB S installation terminal blocks Voltage testers Profi LCD+ Profi LED+ Multi-Tester digital multimeter Amp-Tester clamp meter 191 Operating tool, for TOPJOB S installation terminal blocks 2009-309 1 Operating tool, for TOPJOB S installation terminal blocks 2009-310 1 Profi LCD+, 4 mm Ø removable test probes, 20-807 1 Profi LED+, 4 mm Ø removable test probes, 20-80 1 Multi-Tester, acoustical continuity test, diode test, data hold function 20-810 1 Amp-Tester, digital clamp meter, true RMS measurement, IP44 protection class, data hold function, 20-815 1 Accessories Spare test probes, 4 mm Ø (2 pcs) 20-808 1 Replacement test leads, for Multi-Tester, 20-811 1
192 Cable and Wire Strippers 20 Series Cable stripper Cable stripper Quickstrip 10 wire stripper 0.02 10 mm 2 f-st ( mm 2 sol. ) Quickstrip 1 wire stripper 4 1 mm 2 Wire cutter up to 10 mm 2 f-st (1.5 mm 2 sol. ) Cable stripper, 20-171 1 Cable stripper, 20-174 1 Quickstrip 10 wire stripper 20-124 1 Quickstrip 1 wire stripper 20-125 1 Accessories, Item-Specific Accessories, Item-Specific Accessories, Item-Specific Replacement blade, 20-170 1 Replacement blade, 20-173 1 Standard blade cassette 2 2 20-12 1 ping results up to 11 mm diameter - Safe and easy to use: Three locking positions for circular, longitudinal and spiral cuts - High cable stripping capacity of up to 45 mm diameter - Well balanced, ergonomic design features rests for cable retention hook V blade cassette 2 to 4 mm 2 for PTFE 20-127 1 Standard blade cassette 4 mm 2 2 20-128 1
Cable Cutter and TESTBOY, 20 Series Banana Plugs, 215 Series Cable cutter TESTBOY Banana plugs for 4 mm Ø sockets 0.08-2.5 mm 2 AWG 28 14 42 V I N 20 A L 9 11 mm / 0.39 in 193 Cable cutter, for copper and aluminum cables up to 35 mm 2 20-118 TESTBOY, non-contact voltage tester, 20-804 1 Banana plugs, for 4 mm Ø sockets, color mixed, 215-111 Banana plugs, for 4 mm Ø sockets, orange 215-211 red 215-212 black 215-311 green 215-411 215-511 blue 215-711 gray 215-811 215-911 Conductor termination: Press button fully and insert stripped conductor into square The WAGO TESTBOY detects: Live conductors Line breaks Defective lamps in strings of lights
194 Crimping Tools 20 Series Variocrimp 4 crimping tool 0.25 4 mm 2 / AWG 22 12 Variocrimp 1 crimping tool 1 mm 2 / AWG 10 Crimping tool 25 10 mm², 1 mm² and 25 mm² AWG 8, AWG and AWG 4 Variocrimp 4 crimping tool, 20-204 1 Variocrimp 1 crimping tool, 20-21 1 Crimping tool 25, 20-225 1 What is a gas-tight connection In a gas-tight connection, the conductor and the ferrule are compressed together, eliminating all ther a liquid nor a gaseous medium can penetrate crimped single conductors is prevented, ruling out nearly any increase in the crimped connection resis-
Crimping Tool, 20 Series Ferrules, 21 Series 195 Crimping tool 50 35 mm² and 50 mm² AWG 2 and AWG 1 Insulated ferrules Crimping tool 50, 20-250 1 Elevated resistance is detrimental for signal trans- hence a temperature increase due to contact (risk ed, such as the WAGO crimping tools tools only open after the crimping process has been Cross section data for ferruled conductors indicated for WAGO products is based on this crimping Sleeve for Color Strip Length L L1 D D1 D2 mm 2 AWG mm mm 21-321 21-301 21-322 21-302 21-221 21-201 21-222 21-202 21-223 21-203 21-224 21-204 21-205 21-20 21-207 21-208 21-209 21-210 Insulated ferrules, extra long, for TOBJOB S terminal blocks 21-241 21-242 21-22 21-243 21-23 21-244 21-24 21-284 21-24 21-2 21-28 21-27 21-287 21-208 21-288 21-289 21-210 Insulated ferrules Uninsulated ferrules (see Full Line Catalog, Volume 1)