Miniature Circuit Breakers S260, S270, S280, S290 S260 S290 MCBs Description The S2 Series of miniature circuit breakers offer a compact solution to protection requirements. The breakers are recognized under standard UL 077 as supplemental protective devices. The S2 devices are current limiting, DIN rail mounted and can offer a good equivalent to fused systems. The S2 is available with application-specifi c trip characteristics to provide maximum circuit protection. The breakers offer thermal-magnetic trip protection according to B, C, D, K and Z characteristics. For the worldwide market, the breakers carry UL, CSA, IEC, CE and many other agency approvals and certifi cations. Features Current limiting Fast breaking time (2. 3. msec) Unique bus connection system Wide range of accessories Available with variable depth handle mechanism Optional Z curve for SCR protection CE certified and marked DIN rail or front panel mounting Finger safe terminals Multi-function terminals Suitable for reverse feed UL 077 and CSA 22.2 277/480VAC and 0V versions Low Voltage Products & s. ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
General information Tripping curves 0,000 00 B 0,000 00 C 0,000 00 D 000 0 000 0 000 0 00 00 00 0 0 0 0. 0. 0.0 AC 0. 0. 0.0 AC 0. 0. 0.0 AC 0.0 0.0 0.0 2 3 7 0 20 30 2 3 0 8 20 30 2 3 0 20 30 0,000 00 K 0,000 00 UC-K 000 0 000 0 00 00 0 0 0. 0. 0.0 AC 0. 0. 0.0 0.0 0.0 2 3 8 02 20 30 2 3 0 20 30 0,000 00 Z 0,000 00 UC-Z 000 0 000 0 00 00 0 0 0. 0. 0.0 AC 0. 0. 0.0 0.0 0.0 2 3 0 20 30 2 3 0 20 30.4 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
General information Construction details (S280 shown) Electro-magnetic pro tec tion Thermal protection-bimetal Operating mechanism Tripping lever Upper terminal Operator Trip in di ca tor Space for iden ti fi ca tion marker Arc chamber Fixed contact Moving contact DIN rail holder Lower terminal Low Voltage Products & s. ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
S260 277/480 VAC B UL 077 CSA C22.2 No. 23 VDE 064 IEC-898 Cable protection S26-B6, pole S262-B6, 2 pole S26-B6NA, P+N Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 6 S26-B6 $ 36 0 S26-B0 36 3 S26-B3 36 6 S26-B6 36 20 S26-B20 38 2 S26-B2 38 A 0 4. 32 S26-B32 40 40 S26-B40 42 S26-B 48 63 S26-B63 6 6 S26-B6NA 62 0 S26-B0NA 62 3 S26-B3NA 62 6 S26-B6NA 62 20 S26-B20NA 68 2 S26-B2NA 72 B 9.0 32 S26-B32NA 74 40 S26-B40NA 76 S26-BNA 90 63 S26-B63NA 02 6 S262-B6 78 0 S262-B0 78 3 S262-B3 78 6 S262-B6 78 20 S262-B20 86 2 S262-B2 88 A 9.0 32 S262-B32 94 40 S262-B40 98 S262-B 2 63 S262-B63 28 Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 6 S263-B6 $ 8 0 S263-B0 8 3 S263-B3 8 6 S263-B6 8 20 S263-B20 30 2 S263-B2 32 A 3 3. 32 S263-B32 2 40 S263-B40 8 S263-B 70 63 S263-B63 94 6 S263-B6NA 2 0 S263-B0NA 2 3 S263-B3NA 2 6 S263-B6NA 2 20 S263-B20NA 62 2 S263-B2NA 68 B 2 8.0 32 S263-B32NA 76 40 S263-B40NA 84 S263-BNA 22 63 S263-B63NA 240 6 S264-B6 6 0 S264-B0 6 3 S264-B3 6 6 S264-B6 6 20 S264-B20 72 2 S264-B2 76 B 2 8.0 32 S264-B32 88 40 S264-B40 96 S264-B 224 63 S264-B63 26 S263-B6, 3 pole Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery 0,000 00 S264-B6, 4 pole S263-B6NA, 3P+N B 000 0 00 0 0. 0. 0.0 0.0 AC 2 3 7 0 20 30.6 Discount schedule CBB Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
S260 277/480 VAC C UL 077 CSA C22.2 - NO. 23 VDE 064 IEC-898 Cable & equipment protection 0,000 00 000 0 00 0 S26-C, pole S262-C, 2 pole S26-CNA, P+N S263-C, 3 pole S264-C, 4 pole S263-CNA, 3P+N C Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 0. S26-C0. $ 42 S26-C 42.6 S26-C.6 42 2 S26-C2 42 3 S26-C3 42 4 S26-C4 42 6 S26-C6 42 8 S26-C8 42 0 S26-C0 42 A 0 4. 3 S26-C3 42 6 S26-C6 42 20 S26-C20 42 2 S26-C2 46 32 S26-C32 48 40 S26-C40 2 S26-C 60 63 S26-C63 68 0. S26-C0.NA 84 S26-CNA 84.6 S26-C.6NA 84 2 S26-C2NA 84 3 S26-C3NA 84 4 S26-C4NA 84 6 S26-C6NA 84 8 S26-C8NA 84 0 S26-C0NA 84 B 9.0 3 S26-C3NA 84 6 S26-C6NA 84 20 S26-C20NA 84 2 S26-C2NA 88 32 S26-C32NA 90 40 S26-C40NA 96 S26-CNA 2 63 S26-C63NA 30 0. S262-C0. 96 S262-C 96.6 S262-C.6 96 2 S262-C2 96 3 S262-C3 96 4 S262-C4 96 6 S262-C6 96 8 S262-C8 96 0 S262-C0 96 A 9.0 3 S262-C3 96 6 S262-C6 96 20 S262-C20 96 2 S262-C2 06 32 S262-C32 06 40 S262-C40 6 S262-C 36 63 S262-C63 2 Rated Catalog List Delivery current number price class 0. S263-C0. $ 38 S263-C 38.6 S263-C.6 38 2 S263-C2 38 3 S263-C3 38 4 S263-C4 38 6 S263-C6 38 8 S263-C8 38 0 S263-C0 38 3 S263-C3 38 6 S263-C6 38 20 S263-C20 38 2 S263-C2 6 32 S263-C32 8 40 S263-C40 74 S263-C 200 60 S263-CS60 228 63 S263-C63 228 0. S263-C0.NA 200 S263-CNA 200.6 S263-C.6NA 200 2 S263-C2NA 200 3 S263-C3NA 200 4 S263-C4NA 200 6 S263-C6NA 200 8 S263-C8NA 200 0 S263-C0NA 200 3 S263-C3NA 200 6 S263-C6NA 200 20 S263-C20NA 200 2 S263-C2NA 206 32 S263-C32NA 22 40 S263-C40NA 224 S263-CNA 264 63 S263-C63NA 304 0. S264-C0. 28 S264-C 28.6 S264-C.6 28 2 S264-C2 28 3 S264-C3 28 4 S264-C4 28 6 S264-C6 28 8 S264-C8 28 0 S264-C0 28 3 S264-C3 28 6 S264-C6 28 20 S264-C20 28 2 S264-C2 234 32 S264-C32 238 40 S264-C40 260 S264-C 300 63 S264-C63 338 Sugg. order qty Wgt. oz. ( pc.) A 3 3. B 2 8.0 B 2 8.0 Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery 0. 0. 0.0 AC 0.0 2 3 0 8 20 30 Low Voltage Products & s Discount schedule CB.7 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
S260 277/480 VAC D UL 077 CSA C22.2 VDE 064 IEC-898 Cable & equipment protection S26-D0., pole S262-D, 2 pole Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 0. S26-D0. $ 42 S26-D 42.6 S26-D.6 42 2 S26-D2 42 3 S26-D3 42 4 S26-D4 42 6 S26-D6 42 8 S26-D8 42 0 S26-D0 42 A 0 4. 3 S26-D3 42 6 S26-D6 42 20 S26-D20 42 2 S26-D2 46 32 S26-D32 48 40 S26-D40 2 S26-D 60 63 S26-D63 68 0. S262-D0. 96 S262-D 96.6 S262-D.6 96 2 S262-D2 96 3 S262-D3 96 4 S262-D4 96 6 S262-D6 96 8 S262-D8 96 0 S262-D0 96 A 9.0 3 S262-D3 96 6 S262-D6 96 20 S262-D20 96 2 S262-D2 06 32 S262-D32 06 40 S262-D40 6 S262-D 36 63 S262-D63 2 Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 0. S263-D0. $ 38 S263-D 38.6 S263-D.6 38 2 S263-D2 38 3 S263-D3 38 4 S263-D4 38 6 S263-D6 38 8 S263-D8 38 A 3 3. 0 S263-D0 38 3 S263-D3 38 6 S263-D6 38 20 S263-D20 38 2 S263-D2 6 32 S263-D32 8 40 S263-D40 74 S263-D 200 63 S263-D63 228 Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery S263-D63, 3 pole 0,000 00 D 000 0 00 0 0. 0. 0.0 AC 0.0 2 3 0 20 30.8 Discount schedule CB Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
S270 277/480 VAC K UL 077 CSA C22.2 - NO. 23 VDE 064 IEC-898 Cable & equipment protection 0,000 00 000 0 00 0 0. 0. 0.0 S27-K0, pole S272-K0, 2 pole S27-K0NA, P+N S273-K0, 3 pole S274-K0, 4 pole S273-K0NA, 3P+N K AC Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 0. S27-K0. $ 42 S27-K 42.6 S27-K.6 42 2 S27-K2 42 3 S27-K3 42 4 S27-K4 42 S27-KS 42 6 S27-K6 42 8 S27-K8 42 0 S27-K0 42 3 S27-K3 42 A 0 4. S27-KS 42 6 S27-K6 42 20 S27-K20 42 2 S27-K2 46 30 S27-KS30 48 32 S27-K32 48 40 S27-K40 2 S27-K 60 60 S27-KS60 68 63 S27-K63 68 0. S27-K0.NA 84 S27-KNA 84.6 S27-K.6NA 84 2 S27-K2NA 84 3 S27-K3NA 84 4 S27-K4NA 84 6 S27-K6NA 84 8 S27-K8NA 84 0 S27-K0NA 84 B 9.0 3 S27-K3NA 84 6 S27-K6NA 84 20 S27-K20NA 84 2 S27-K2NA 88 32 S27-K32NA 90 40 S27-K40NA 96 S27-KNA 2 63 S27-K63NA 30 0. S272-K0. 96 S272-K 96.6 S272-K.6 96 2 S272-K2 96 3 S272-K3 96 4 S272-K4 96 S272-KS 96 6 S272-K6 96 8 S272-K8 96 0 S272-K0 96 A 9.0 3 S272-K3 96 S272-KS 96 6 S272-K6 96 20 S272-K20 96 2 S272-K2 06 30 S272-KS30 06 32 S272-K32 06 40 S272-K40 6 S272-K 36 60 S272-KS60 2 63 S272-K63 2 Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 0. S273-K0. $ 38 S273-K 38.6 S273-K.6 38 2 S273-K2 38 3 S273-K3 38 4 S273-K4 38 S273-KS 38 6 S273-K6 38 8 S273-K8 38 0 S273-K0 38 3 S273-K3 38 A 3 3. S273-KS 38 6 S273-K6 38 20 S273-K20 38 2 S273-K2 6 30 S273-KS30 8 32 S273-K32 8 40 S273-K40 74 S273-K 200 60 S273-KS60 228 63 S273-K63 228 0. S273-K0.NA 200 S273-KNA 200.6 S273-K.6NA 200 2 S273-K2NA 200 3 S273-K3NA 200 4 S273-K4NA 200 6 S273-K6NA 200 8 S273-K8NA 200 0 S273-K0NA 200 B 2 8.0 3 S273-K3NA 200 6 S273-K6NA 200 20 S273-K20NA 200 2 S273-K2NA 206 32 S273-K32NA 22 40 S273-K40NA 224 S273-KNA 264 63 S273-K63NA 304 0. S274-K0. 28 S274-K 28.6 S274-K.6 28 2 S274-K2 28 3 S274-K3 28 4 S274-K4 28 6 S274-K6 28 8 S274-K8 28 B 2 8.0 0 S274-K0 28 3 S274-K3 28 6 S274-K6 28 20 S274-K20 28 2 S274-K2 234 32 S274-K32 238 40 S274-K40 260 S274-K 300 63 S274-K63 338 Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery 0.0 2 3 8 02 20 30 KS is for standard U.S. size. Low Voltage Products & s Discount schedule CB.9 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
S280 277/480 VAC K UL 077 CSA C22.2 - NO. 23 VDE 0660 Cable & equipment protection S28-K6, pole S282-K, 2 pole S283-K63, 3 pole Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 0.2 S28-K0.2 $ 4 0.3 S28-K0.3 4 0. S28-K0. 4 0.7 S28-K0.7 4 S28-K 4.6 S28-K.6 4 2 S28-K2 4 3 S28-K3 4 4 S28-K4 4 6 S28-K6 4 8 S28-K8 4 A 0 4.6 0 S28-K0 4 3 S28-K3 4 6 S28-K6 4 20 S28-K20 4 2 S28-K2 6 32 S28-K32 8 40 S28-K40 64 S28-K 70 63 S28-K63 80 0.2 S282-K0.2 28 0.3 S282-K0.3 28 0. S282-K0. 28 0.7 S282-K0.7 28 S282-K 28.6 S282-K.6 28 2 S282-K2 28 3 S282-K3 28 4 S282-K4 28 6 S282-K6 28 A 9.2 8 S282-K8 28 0 S282-K0 28 3 S282-K3 28 6 S282-K6 28 20 S282-K20 28 2 S282-K2 30 32 S282-K32 34 40 S282-K40 34 S282-K 62 63 S282-K63 82 Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 0.2 S283-K0.2 $ 94 0.3 S283-K0.3 94 0. S283-K0. 94 0.7 S283-K0.7 94 S283-K 94.6 S283-K.6 94 2 S283-K2 94 3 S283-K3 94 4 S283-K4 94 6 S283-K6 94 A 3 3.9 8 S283-K8 94 0 S283-K0 94 3 S283-K3 94 6 S283-K6 94 20 S283-K20 94 2 S283-K2 96 32 S283-K32 200 40 S283-K40 2 S283-K 246 63 S283-K63 280 Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery 0,000 00 K 000 0 00 0 0. 0. 0.0 AC 0.0 2 3 8 02 20 30.0 Discount schedule CB7 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
S280 (W) for use with ring tongue terminal connectors 277/480 VAC K UL 077 CSA C22.2 - NO. 23 VDE 0660 Cable & equipment protection S28-K6W, pole S282-KW, 2 pole S283-K63W, 3 pole Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 0.2 S28-K0.2W $ 4 0.3 S28-K0.3W 4 0. S28-K0.W 4 0.7 S28-K0.7W 4 S28-KW 4.6 S28-K.6W 4 2 S28-K2W 4 3 S28-K3W 4 4 S28-K4W 4 6 S28-K6W 4 8 S28-K8W 4 B 0 4.6 0 S28-K0W 4 3 S28-K3W 4 6 S28-K6W 4 20 S28-K20W 4 2 S28-K2W 6 32 S28-K32W 8 40 S28-K40W 64 S28-KW 70 63 S28-K63W 80 0.2 S282-K0.2W 28 0.3 S282-K0.3W 28 0. S282-K0.W 28 0.7 S282-K0.7W 28 S282-KW 28.6 S282-K.6W 28 2 S282-K2W 28 3 S282-K3W 28 4 S282-K4W 28 6 S282-K6W 28 B 9.2 8 S282-K8W 28 0 S282-K0W 28 3 S282-K3W 28 6 S282-K6W 28 20 S282-K20W 28 2 S282-K2W 30 32 S282-K32W 34 40 S282-K40W 34 S282-KW 62 63 S282-K63W 82 Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 0.2 S283-K0.2W $ 94 0.3 S283-K0.3W 94 0. S283-K0.W 94 0.7 S283-K0.7W 94 S283-KW 94.6 S283-K.6W 94 2 S283-K2W 94 3 S283-K3W 94 4 S283-K4W 94 6 S283-K6W 94 B 3 3.9 8 S283-K8W 94 0 S283-K0W 94 3 S283-K3W 94 6 S283-K6W 94 20 S283-K20W 94 2 S283-K2W 96 32 S283-K32W 200 40 S283-K40W 2 S283-KW 246 63 S283-K63W 280 Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery Screws (must be ordered separately!) Item Catalog List number price 2 K PKG of 20 screws S2-SCR No charge 0,000 00 000 0 00 0 0. 0. 0.0 AC 0.0 2 3 8 02 20 30 ➀ For use with ring tongue or cable terminals only. Cannot be used with busbar system. 2 No charge when ordered with the S280(W). Low Voltage Products & s Discount schedule CB7. ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
S280UC 0 V K UL 077 VDE 0660 CSA 22.2 No. 23 Cable and Equip ment Protection S28UC-K2, pole S282UC-K8, 2 pole S283UC-K6, 3 pole Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 0.2 S28UC-K0.2 $ 04 0.3 S28UC-K0.3 04 0. S28UC-K0. 04 0.7 S28UC-K0.7 04 S28UC-K 04.6 S28UC-K.6 04 2 S28UC-K2 04 3 S28UC-K3 04 4 S28UC-K4 04 6 S28UC-K6 04 B 0 4.6 8 S28UC-K8 04 0 S28UC-K0 04 6 S28UC-K6 04 20 S28UC-K20 04 2 S28UC-K2 08 32 S28UC-K32 0 40 S28UC-K40 6 S28UC-K 36 63 S28UC-K63 2 0.2 S282UC-K0.2 242 0.3 S282UC-K0.3 242 0. S282UC-K0. 242 0.7 S282UC-K0.7 242 S282UC-K 242.6 S282UC-K.6 242 2 S282UC-K2 242 3 S282UC-K3 242 4 S282UC-K4 242 B 9.2 6 S282UC-K6 242 8 S282UC-K8 242 0 S282UC-K0 242 6 S282UC-K6 242 20 S282UC-K20 242 2 S282UC-K2 248 32 S282UC-K32 26 40 S282UC-K40 266 S282UC-K 32 63 S282UC-K63 348 Rated Catalog List Delivery current number price class 0.2 S283UC-K0.2 $ 370 0.3 S283UC-K0.3 370 0. S283UC-K0. 370 0.7 S283UC-K0.7 370 S283UC-K 370.6 S283UC-K.6 370 2 S283UC-K2 370 3 S283UC-K3 370 4 S283UC-K4 370 6 S283UC-K6 370 8 S283UC-K8 370 0 S283UC-K0 370 6 S283UC-K6 370 20 S283UC-K20 370 2 S283UC-K2 382 32 S283UC-K32 408 40 S283UC-K40 448 S283UC-K 472 63 S283UC-K63 34 Sugg. order qty Wgt. oz. ( pc.) B 3 3.9 Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery Direct current applications The S280UC differs from standard miniature circuit breakers in that the UC versions include a permanent magnet which aids in the extinguishing of the arc during medium and high level faults. It is necessary to observe the correct polarity and current direction when connecting the UC breakers. Two examples of correct connection are shown below. Maximum voltage between leads 0,000 00 UC-K 2V Single Pole S28UC L- L+ 0V Two Pole S282UC L- L- L+ L+ 000 0 00 0 - +2 - - +2 +2 3+ 3+ 4-4- 0. 0. 0.0 0.0 2 3 0 20 30 LOAD - + LOAD LOAD - - + + Termination points are marked on all UC type MCBs, points one () and four (4) are negative and points two (2) and three (3) are positive. Four pole breakers are also available for voltage reversal applications..2 Discount schedule CB7 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
S280 & S280UC 277/480VAC & 0V Z UL 077 VDE 0660 CSA 22.2 No. 23 Fast trip characteristic S28-Z6, pole S282-Z32, 2 pole S283-Z32, 3 pole 277/480 VAC 0 V Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 0. S28-Z0. $ 70 S28-Z 70.6 S28-Z.6 70 2 S28-Z2 70 3 S28-Z3 70 4 S28-Z4 70 6 S28-Z6 70 8 S28-Z8 70 B 0 4. 0 S28-Z0 70 6 S28-Z6 70 20 S28-Z20 70 2 S28-Z2 70 32 S28-Z32 74 40 S28-Z40 78 S28-Z 88 63 S28-Z63 00 0. S282-Z0. 62 S282-Z 62.6 S282-Z.6 62 2 S282-Z2 62 3 S282-Z3 62 4 S282-Z4 62 6 S282-Z6 62 8 S282-Z8 62 B 9.2 0 S282-Z0 62 6 S282-Z6 62 20 S282-Z20 62 2 S282-Z2 84 32 S282-Z32 70 40 S282-Z40 76 S282-Z 206 63 S282-Z63 232 0. S283-Z0. 244 S283-Z 244.6 S283-Z.6 244 2 S283-Z2 244 3 S283-Z3 244 4 S283-Z4 244 6 S283-Z6 244 8 S283-Z8 244 B 3 3.9 0 S283-Z0 244 6 S283-Z6 244 20 S283-Z20 244 2 S283-Z2 248 32 S283-Z32 24 40 S283-Z40 266 S283-Z 306 63 S283-Z63 344 Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 0. S28UC-Z0. $ 68 S28UC-Z 68.6 S28UC-Z.6 68 2 S28UC-Z2 68 3 S28UC-Z3 68 4 S28UC-Z4 68 6 S28UC-Z6 68 8 S28UC-Z8 68 0 S28UC-Z0 68 B 0 4.6 6 S28UC-Z6 68 20 S28UC-Z20 68 2 S28UC-Z2 70 32 S28UC-Z32 76 40 S28UC-Z40 88 S28UC-Z 26 63 S28UC-Z63 242 0. S282UC-Z0. 390 S282UC-Z 390.6 S282UC-Z.6 390 2 S282UC-Z2 390 3 S282UC-Z3 390 4 S282UC-Z4 390 6 S282UC-Z6 390 8 S282UC-Z8 390 0 S282UC-Z0 390 B 9.2 6 S282UC-Z6 390 20 S282UC-Z20 390 2 S282UC-Z2 398 32 S282UC-Z32 40 40 S282UC-Z40 426 S282UC-Z 498 63 S282UC-Z63 8 0. S283UC-Z0. 94 S283UC-Z 94.6 S283UC-Z.6 94 2 S283UC-Z2 94 3 S283UC-Z3 94 4 S283UC-Z4 94 6 S283UC-Z6 94 8 S283UC-Z8 94 B 3 3.9 0 S283UC-Z0 94 6 S283UC-Z6 94 20 S283UC-Z20 94 2 S283UC-Z2 603 32 S283UC-Z32 62 40 S283UC-Z40 67 S283UC-Z 76 63 S283UC-Z63 8 0,000 00 000 0 00 UC-Z 0,000 00 000 0 00 Z Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery 0 0 0. 0. 0.0 0. 0. 0.0 AC 0.0 2 3 0 20 30 0.0 2 3 0 20 30 Low Voltage Products & s Discount schedule CB7.3 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
S290 277/480 VAC C VDE 0660 Cable and equipment protection S29-C80 480 VAC Rated Catalog List Delivery current number price class Sugg. order qty Wgt. oz. ( pc.) 80 S29-C80 $ 38 00 S29-C00 4 B 6 9.2 2 S29-C2 92 80 S292-C80 340 00 S292-C00 364 B 3 8.4 2 S292-C2 68 80 S293-C80 36 00 S293-C00 48 B 2 27.6 2 S293-C2 732 80 S294-C80 740 00 S294-C00 76 B 36.8 2 S294-C2 948 S290-H Auxiliary contact S290-H 72 B.7 Bell alarm S290-S 2 B.7 Shunt trip S290-A 4 B 6.2 For fi eld mounting, left side, 0V 4VAC S290-A2 4 B 6.2 For fi eld mounting, left side, 24 48V Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery 0,000 00 C 000 0 00 0 0. 0. 0.0 0.0 AC 2 3 0 8 20 30. Discount schedule CB9 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Accessories Busbars S260, S270, S280 Phase L... L Amp rating Number Busbar End cap Catalog List Delivery Suggested of length catalog number price class order qty. poles (mm) number quantity Weight (ozs) 2 207 SZ-KS/2 $ 2 0 0.6 6 988 SZ-KS/6 36 A 2.6 8 6 988 SZ-KS2/6 46.2 0 6 988 SZ-VB4.32 68 0.0 Uninsulated copper bar mounts fl ush with bottom edge of circuit breakers. For use on load side (bottom) of S260, S270, S280 and line side (top) of S280 MCBs. 2 Phase Amp rating Number Busbar End cap Catalog List Delivery Suggested of length catalog number price class order qty. poles (mm) number quantity Weight (ozs) L L2 8 03 PSB-END3 SZ-PSB4N $ 22.4 6 8 03 PSB-END3 SZ-PSB6N 22 A 9. 2 23 PSB-3UL 40 4.0 Insulated busbar assembly contains 2 separate circuits for use with, +N or 2 pole MCBs. For use on load side (bottom) of S260, S270, S280 and line side (top) of S280 MCBs. L L2 L L2... 3 Phase Amp rating Number Busbar End cap Catalog List Delivery Suggested of length catalog number price class order qty. poles (mm) number quantity Weight (ozs) 2 23 PSB-3UL $ 60 3 4.3 60 06 PSB-END6 SZ-PSB4N 30 A 2.4 6 60 06 PSB-END6 SZ-PSB2N 76 34.2 L L2 L3 Insulated busbar assembly contains 3 separate circuits for use with or 3 pole MCBs. For use on load side (bottom) of S260, S270, S280 and line side (top) of S280 MCBs. L L2 L3 L L2 L3... 4 Phase Amp rating Number Busbar End cap Catalog List Delivery Suggested of length catalog number price class order qty. poles (mm) number quantity Weight (ozs) 60 06 PSB-END4 SZ-PSB62N $ 204 A 23.2 6 60 06 PSB-END4 SZ-PSB64N 236 3.6 L L2 L3 L4 L L2 L3 L4... L L2 L3 L4 Insulated busbar assembly contains 4 separate circuits for use with 3+N or 4 pole MCBs. For use on load side (bottom) of S260, S270, S280 and line side (top) of S280 MCBs. Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery Low Voltage Products & s Discount schedule CB8. ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
Accessories Busbars S260, S270, S280 Phase with auxiliary L Amp rating Number Busbar End cap Catalog List Delivery Suggested of length catalog number price class order qty. poles (mm) number quantity Weight (ozs) 39 044 PSB-END3 SZ-KS3/39N $ A 7.4 6 39 044 PSB-END3 SZ-KS4/39N 6 A 0. Insulated busbar assemblty for use on load side (bottom) of S260, S270, S280 and line side (top) of S280 MCBs. L L L... 3 Phase for pole MCB's with auxillary L L2 L3 Amp rating Number Busbar End cap Catalog List Delivery Suggested of length catalog number price class order qty. poles (mm) number quantity Weight (ozs) 8 044 PSB-END3 SZ-PSB46N $ 24 B 6. 6 8 044 PSB-END3 SZ-PSB48N 8 B 22. Insulated busbar assembly contains 3 separate circuits for use with pole MCBs. For use on load side (bottom) of S260, S270, S280 and line side (top) of S280 MCBs. L L2 L3... 2 Phase with auxillary Amp rating Number Busbar End cap Catalog List Delivery Suggested of length catalog number price class order qty. poles (mm) number quantity Weight (ozs) 6 48 06 SZ-PSB92N 74 B 23.2 Insulated busbar assembly contains 2 separate circuits for use with or 2 pole MCBs. For use on load side (bottom) of S260, S270, S280 and line side (top) of S280 MCBs. L L2 L L2 L L2 L L2... 3 Phase with auxillary L L2 L3 Amp rating Number Busbar End cap Catalog List Delivery Suggested of length catalog number price class order qty. poles (mm) number quantity Weight (ozs) 48 980 PSB-END3 SZ-PSBN $ 24 B.8 6 48 980 PSB-END3 SZ-PSB2N 8 A 22.6 Insulated busbar assembly contains 3 separate circuits for use with or 3 pole MCBs. For use on load side (bottom) of S260, S270, S280 and line side (top) of S280 MCBs. L L2 L3 L L2 L3... Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery.6 Discount schedule CB8 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Accessories Busbars S260, S270, S280 3 Phase L L2 L3 L L2 L3... L L2 L3 Amp rating Number Busbar End cap Catalog List Delivery Suggested of length catalog number price class order qty. poles (mm) number quantity Weight (ozs) 6 2 23 PSB-END3 SZ-PSB23N A 6.0 6 60 06 PSB-END3 SZ-PSB24N 76 34.2 Insulated busbar assembly contains 3 separate circuits for use with, 2+N or 3 pole MCBs. For use on line side (top) of S260 and S270 MCBs. Phase L... L Amp rating Number Busbar End cap Catalog List Delivery Suggested of length catalog number price class order qty. poles (mm) number quantity Insulated busbar assembly contains circuit for use with pole MCBs. For use on line side (top) of S260 and S270 MCBs. Weight (ozs) 2 202 SZ-KS6/2N $ 3 A. 6 007 SZ-KS6/6N 9.0 3 Phase + N, for use with 2 pole MCB's on 3 phase / 4W system N L L2 L3 Amp rating Number Busbar End cap Catalog List Delivery Suggested of length catalog number price class order qty. poles (mm) number quantity Weight (ozs) 8 048 PSB-END4 SZ-PSB8N $ 98 B 22.3 6 8 048 PSB-END4 SZ-PSB60N 238 A 30.8 Insulated busbar assembly contains 4 separate circuits for use with +N or 2 pole MCBs. For use on load side (bottom) of S260, S270, S280 and line side (top) of S280 MCBs. L N L2 N L3 N L N L2... MCB Busbar accessories Busbar mounted terminal block p/n: SZ-ESK2 -pole Busbar End Caps Bus tooth covers p/n: SZ-BSK -poles Catalog List Delivery Suggested Weight Description number price class order qty. ounce qty. (2 pc.) PSB-END3 Busbar end caps PSB-END4 PSB-END $ 2 A 0 PSB-END6 Busbar tooth covers (shrouds unused portion of busbar) SZ-BSK 4 A 0 Busbar mounted terminal block, pole, for use on all busbars. SZ-ESK2 0 A.0 Wire size: AWG to 2 AWG Busbar mounted terminal block, pole, for use on all busbars. SZ-ESK 0 A.0 Wire size: AWG to 4 AWG. NOTE ALL BUSBARS MAY BE CENTER FED IN OR- DER TO DOUBLE THE AMPACITY RATING Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery Low Voltage Products & s Discount schedule CB8.7 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
Accessories S260, S270 & S280 S2-H Auxiliary contacts Electrical Catalog List Delivery Suggested Wgt. oz. accessories number price class order quantities ( pc.) For fi eld mounting: left side N.O./ N.C. S2-H $ 36 2 N.O. S2-H20 36 2 N.C. S2-H02 36 N.O./ 2 N.C. S2-H2 4 2 N.O./ N.C. S2-H2 4 2 N.O./ N.C. (low voltage) S2-H2KL 60 A.4 The S2-H auxiliary switch can be fi eld mounted to any S260, S270 or S280 series breaker. The auxiliary contacts will signal whether the breaker is in the ON or OFF position. The contacts are rated 6A/240 VAC and.a/0 V. Minimum operating voltage is 2 VAC/V. Wire size: 8 AWG to 6 AWG. Bell alarm For fi eld mounting, left side S2-S 48 A.4 The S2-S bell alarm includes a set of contacts that will only signal when the breaker has tripped. Typically the contacts would be connected to an alarm or bell to signal the operator that an overcurrent trip has occured. The bell alarm also includes a test button for testing the alarm contacts without opening the breaker. The contact is rated 6A/240 VAC and.a/0 V. Minimum operating voltage is 2 VAC/V. S2-A Bell alarm with auxiliary contact For fi eld mounting, left side S2-S/H 8 A.4 The S2-S/H bell alarm with auxiliary contact device combines one set of bell alarm contacts with one set of auxiliary contacts (N.O.). Shunt trip For fi eld mounting, left side 2-60 VAC (2-60V) S2-A 0-4 VAC (0-2 V) S2-A2 38 A.2 For remote tripping of breaker, a shunt trip device can be added to the MCB. The solenoid device opens the breaker after control voltage is applied. Shunt trips are available depending on control system voltage (2-4 VAC/V). S2-BM Undervoltage release For fi eld mounting, left or right side 2 V S2-BM 24 VAC/V S2-BM2 48 VAC/V S2-BM3 0 VAC/V S2-BM4 220 VAC/V S2-BM 380 VAC S2-BM6 26 A.2 When control voltage drops below approximately % of rated voltage, the S2-BM opens the breaker. The breaker can not be operated unless proper control voltage is fi rst applied to the UVR coil. Similar in size and mounting to the shunt trip accessory; can be left or right side mounted. S2-S Hand operated neutral disconnect For fi eld mounting, right side, 40A max. S2-NT 27 A.4 Wire range: -8 AWG. Must be turned off manually. Not UL Listed. S2-NT is only /2 pole width. Factory mounting All accessories can be easily mounted in the fi eld. For factory mounting of any accessory devices, add $30 list to total price per breaker. To create complete catalog number, take suffi x of accessory device following S2- and add suffi x to end of breaker part number. Multiple suffi xes must be added in alphabetical order. Example: S272-K20A $ 264 (2 pole, 20A breaker with type A shunt trip) S272-K20 @ $96 + A @ $38 + factory mounting @ $30 = $264 S272-K20A2H $ 300 (2 pole, 20A breaker with type A2 shunt trip and H aux. contacts) S272- K20 @ $96 + A2 @ $38 + H @ $36 + factory mounting @ $30 = $300 S2-S/H Auxiliary contacts and shunt trips may be mounted in combination. Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery S2-NT NOTE: Above accesssories are for use with types S260, S270 and S280 breakers only..8 Discount schedule CB8 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Accessories S260, S270, S280 S0-ME2 Front mounting kit Electrical Catalog List Delivery Suggested Wgt. oz. accessories number price class order quantities ( pc.) For 2 poles S0-ME $ 60 2. For 2 poles S0-ME2 70 A 2.9 For 2 0 poles S0-ME3 80 3.6 Optional rear terminals S0-K 6. Includes fl ange, mounting rail and hardware. Front mounting clip For 4 poles MB-CL 3 A 2 Simple mounting clip for up to four module mounting. Front mounting bracket For 3 poles MB-3PD 3 A 2. For fl ush mounting of three pole MCBs: includes hardware. MB-CL Locking device Adaptor only SA 9 A 0 0.7 Padlock only w/ 2 keys SA2 9 0. Allows breaker to be locked in ON or OFF position. Labeling accessory sheet = 00 blank labels sheet = 00 numbered labels STL-ST 74 A Snaps into rail indent on front of MCB Label holder & labels includes 00 label carriers. MB-3PD SA Enclosure, IP For 4 modules 2644 84 8. For 6 modules 2646 98 A 0.8 For 0 modules 26 26 20.4 For 20 modules 262 20 4.0 Molded plastic complete with mounting rail and knock-outs for cable entries. Blanking plates Single pole (set of 0) BP-P 6 A Twelve pole (snap-off, set of ) BP-2P 7 SA2 Terminal cover enclosure, IP40 For 2 modules 2402 32 2.0 For 4 modules 2404 4 B 2.8 For 6 modules 2406 6 3.4 For 8 modules 2408 66 4. For additional protection against accidental contact. Includes integrated mounting rail. Handle mechanism For use with 2, 3 and 4 pole S2 MCBs and disconnect switch handles with mm shaft. Mounting rail RHS2-M 76 A 9.2 Universal mounting SMR-39 2 A 8 3mm DIN rails are available in 39-inch strips ( meter). Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery Low Voltage Products & s Discount schedule CB8.9 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
Accessories S260, S270, S280 Posidrive tools Screwdriver, # SD-PZ $ 40 A 4 Screwdriver, #2 SD-PZ2 40 A 4 Bit, # BIT-PZ 4 A 4 Bit, #2 BIT-PZ2 4 A 4 Connection terminals Electrical Catalog List Delivery Suggested Wgt. oz. accessories number price class order quantities ( pc.) Cross section Type Catalog List Delivery Suggested Wgt. oz. mm 2 number number price class order quantities ( pc.) 2AWG (3mm 2 ) Fork SZ-AS7 0 A 0 0.4 /0 (mm 2 ) Fork SZ-AS78 0 A 0 0.4 /0 (mm 2 ) Pin SZ-AST2 A 0 0. /0 (mm 2 ) Pin SZ-AST A 0 0..20 Discount schedule CB8 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Technical data Mounting and operating instructions Mounting MCB Removing MCB Mounting Universal mounting position using snap-on mounting to standard 3x7.mm DIN rail. Miniature circuit breakers (MCBs) can also be mount ed to front of door using a panel cut-out with breaker handle pro trud ing through panel opening for external operation. Special front mount ing kit type ME is avail able (see page 2.2). Connection Terminals are suitable for solid or fl exible conductors from 8 to 4 AWG (0.7 to 2mm 2 ) with no busbar connected. When max i mum busbar size of 36 mm 2 is used, maximum cable is 6 AWG (6 mm 2 ). Maximum tightening torque of 7. in-lb (2 Nm) for line/load terminals and 4. in-lb (0.Nm) for ac ces so ry device terminals. Operation MCBs are switched on by moving the handle to the upper po si tion. Stamped onto the handle switch, a I is visible confi rming that the breaker is closed. The MCBs are trip-free, if the handle is being forced to the ON position, the breaker will still trip under fault conditions. The O marking indicates that the breaker is in the OFF position. The MCB is now open and the load is disconnected from line power. When a breaker has tripped, the MCB handle should fi rst be set to the full OFF position to make certain the trip mechanism has been reset. Once the fault has been determined and cleared the MCB can again be switched ON. Maintenance ABB miniature circuit breakers require no special maintenance; only normal electrical system maintenance pro ce dures are required. Possible mounting arrangements of MCB accessories H S S/H MCB NT H S S/H A BM MCB A BM MCB BM Auxiliary switch/bell alarm neutral disconnect Auxiliary switch Shunt trip or undervoltage release mounted with auxiliary switch Shunt trip and/or undervoltage release Set MCB to OFF position and mount Set breaker to ON position Break out opening on side of MCB auxiliary switch to side of breaker Attach with spring clamps Bell alarm with auxiliary contact Set MCB to OFF position, insert metal pin as Break out opening on side of MCB noted above with arrow and mount device to Set breaker to ON position and remove seal side of MCB Attach with spring clamps Shunt trip and undervoltage release Remove seal Add shunt trip to MCB Attach with spring clamps Low Voltage Products & s.2 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
Technical data Busbars & connectors Connection methods Dual function terminals provided in open position for connection to busbars. Pressing on screw head opens box terminal for cable insertion. Only the lower terminal is dual func tion. Terminals allow for con nec tion of cable 8-4 AWG. Conductors of different sizes may also be used in same terminal. Up to fi ve conductors, 6 AWG each, can be safely connected per terminal. Lower terminals can be bussed together with single phase or multi-phase busbars as shown. Upper ter mi nals can also be busbar con nect ed. Lower terminal can also be bussed with solid round con duc tor. Cables can be connected to box terminals in addition to busbar con nec tions on lower, dual function terminals..22 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Technical data S260, S270, & S280 Item S260-B S260-C, -D S270-K S280-K Approvals: UL 077 077 077 077 CSA C22.2 No.23 C22.2 No. 23 C22.2 No. 23 VDE 064, 0660 0660 0660 0660 IEC 898, 947 898, 947 898, 947 898, 947 No. of poles:,2,3,4 +N,3+N,2,3,2,3,4, +N,3+N,2,3,4,+N,3+N Tripping characteristic: B C,D K K Rated currents: 6 to 63A 0. to 63A 0. to 63A 0.2 to 63A Minimum operating voltage: 2V 2V 2V 2V UL/CSA rated voltage & Single pole Multi pole Single pole Multi pole Single pole Multi pole Single pole Multi pole interrupting capacity 20VAC 0kA 0kA 0kA 0kA for 0.2-40A 6kA for -63A 240VAC 6kA 0kA 6kA 0kA 6kA 0kA 0kA for 0.2-40A 0kA for 0.2-32A 6kA for -63A 6kA for 40-63A 277VAC 6kA 6kA 6kA 0kA for 0.2-40A 277/480 VAC 6kA 6kA 6kA 0kA 60V 0kA 0kA 0kA 0kA 0kA 0kA 2V 0kA 0kA 0kA Frequency: /60Hz (See below) /60Hz (see below) /60Hz (see below) /60Hz (see below) Rated voltage IEC single pole 240/4VAC 240/4VAC 240/4VAC 240/4VAC 60V 60V 60V 60V IEC multi-pole 4VAC 4VAC 4VAC 4VAC 0V 0V 0V 0V Protection category: IP20 IP20 IP20 IP20 Depth of unit per DIN 43880: 68mm 68mm 68mm 68mm Mounting position: optional optional optional optional Standard mounting: 3mm DIN rail 3mm DIN rail 3mm DIN rail 3mm DIN rail Main and shunt trip terminals: Wire size 6-40A 8-4 AWG 0.-40A 8-4 AWG 0.-40A 8-4 AWG 0.2-40A 8-4 AWG A & above 8-2 AWG A & above 8-2 AWG A & above 8-2 AWG A & above 8-2 AWG Torque 7. in-lbs. 7. in-lbs. 7. in-lbs. 7. in-lbs. Tool #2 Posidrive #2 Posidrive #2 Posidrive #2 Posidrive Accessory terminals Wire size 8-6 AWG 8-6 AWG 8-6 AWG 8-6 AWG Torque 4. in-lbs. 4. in-lbs. 4. in-lbs. 4. in-lbs. Tool # Posidrive # Posidrive # Posidrive # Posidrive Service life at rated load: I n < 32 A, 20,000 operations I n < 32 A, 20,000 operations I n < 32 A, 20,000 operations I n < 32 A, 20,000 operations I n > 32 A, 0,000 operations I n > 32 A, 0,000 operations I n > 32 A, 0,000 operations I n > 32 A, 0,000 operations Ambient temperatures: -2 C to + C -2 C to + C -2 C to + C -2 C to + C Storage temperatures -40 C to + 70 C -40 C to + 70 C -40 C to + 70 C -40 C to + 70 C Shock resistance: 30g minimum of 2 impacts, 30g minimum of 2 impacts, 30g minimum of 2 impacts, 30g minimum of 2 impacts, shock duration of 3ms shock duration of 3ms shock duration of 3ms shock duration of 3ms Vibration resistance: g, 20 cycles, Hz, Hz g, 20 cycles, Hz, Hz g, 20 cycles, Hz, Hz g, 20 cycles, Hz, Hz @ 0.8 ~ I n @ 0.8 ~ I n @ 0.8 ~ I n @ 0.8 ~ I n Disconnecting neutral rating: 6kA switching 6kA switching 6kA switching Influence of frequency on electro-magnetic trips Magnetic trip values shown on trip curves are valid for /60Hz ap pli ca tions. For frequencies other than /60Hz, the mag net ic (in stan ta neous) trip values are increased by the factor given below: 6 2/3-60Hz 00Hz 200Hz 400Hz Approx. factor..2.. Thermal tripping is independent of frequency. Available for purchase. See page.9. Low Voltage Products & s.23 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
Technical data S280, S280UC, S290 Item S280UC-K S280-Z S280UC-Z S290-C Approvals: UL 077 077 077 CSA VDE 0660 0660 0660 0660 IEC 898,947 898, 947 898, 947 898 No. of poles:,2,3,2,3,4,2,3,2,3,4 Tripping characteristic: K Z Z C Rated currents: 0.2 to 63A 0. to 63A 0. to 63A 80 to 2A Minimum operating voltage: 2V 2V 2V 2V UL/CSA rated voltage & Single pole Multi pole Single pole Multi pole Single pole Multi pole interrupting capacity 20VAC 6kA for 0.2-40A 0kA for 0.2-40A 6kA for 0.2-40A ka for -63A 6kA for -63A ka for -63A 240VAC 6kA for 0.2-40A 6kA for 0.2-40A 0kA for 0.2-40A 0kA for 0.2-32A 6kA for 0.2-40A 6kA for 0.2-40A ka for -63A ka for -63A 6kA for -63A 6kA for 40-63A ka for -63A ka for -63A 277VAC 4.kA for 0.2-40A 0kA for 0.2-40A 4.kA for 0.2-40A ka for -63A 6kA for -63A ka for -63A 277/480 VAC 4.kA for 0.2-40A 0kA 4.kA for 0.2-40A ka for -63A ka for -63A 60V 0kA 0kA 0kA 0kA 2V 0kA 0kA 0kA 0kA 2V 4.kA 4.kA 4.kA 4.kA 0V 4.kA 4.kA Frequency: /60Hz (see below) /60 Hz (see below) /60Hz (see below) /60Hz (see below) Rated voltage IEC single pole 240/4VAC 240/4VAC 240/4VAC 230/440VAC 220V 60V 220V 60V IEC multi-pole 4VAC 4VAC 4VAC 440VAC 440V 0V 440V 0V Protection category: IP20 IP20 IP20 IP20 Depth of unit per DIN 43880: 68mm 68mm 68mm 70mm Mounting position: optional optional optional optional Standard mounting: 3mm DIN rail 3mm DIN rail 3mm DIN-rail 3mm DIN-rail Main and shunt trip terminals: Wire size 0.2-40A 8-4 AWG 0.-40A 8-4 AWG 0.-40A 8-4 AWG 80-2A -/0 AWG A & above 8-2 AWG A & above 8-2 AWG A & above 8-2 AWG Torque 7. in-lbs. 7. in-lbs. 7. in-lbs. 7. in-lbs. Tool #2 Posidrive #2 Posidrive #2 Posidrive #2 Posidrive Accessory terminals Wire size 8-6 AWG 8-6 AWG 8-6 AWG 8-6 AWG Torque 4. in-lbs. 4. in-lbs. 4. in-lbs. 4. in-lbs. Tool # Posidrive # Posidrive # Posidrive # Posidrive Service life at rated load: I n < 32 A, 20,000 operations I n < 32 A, 20,000 operations I n < 32 A, 20,000 operations 0,000 operations I n > 32 A, 0,000 operations I n > 32 A, 0,000 operations I n > 32 A, 0,000 operations Ambient temperatures: -2 C to + C -2 C to + C -2 C to + C - C to +4 C Storage temperatures -40 C to + 70 C -40 C to + 70 C -40 C to + 70 C -40 C to + 70 C Shock resistance: 30g minimum of 2 impacts, 30g minimum of 2 impacts, 30g minimum of 2 impacts, 30g minimum of 2 impacts, shock duration of 3ms shock duration of 3ms shock duration of 3ms shock duration of 3ms Vibration resistance: g, 20 cycles, Hz, Hz g, 20 cycles, Hz, Hz g, 20 cycles, Hz, Hz 60m/s 2, at 0 Hz @ 0.8 ~ I n @ 0.8 ~ I n @ 0.8 ~ I n Influence of frequency on electro-magnetic trips Magnetic trip values shown on trip curves are valid for /60Hz ap pli ca tions. For frequencies other than /60Hz, the mag net ic (in stan ta neous) trip values are increased by the factor given below: 6 2/3-60Hz 00Hz 200Hz 400Hz Approx. factor..2.. Thermal tripping is independent of frequency..24 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Technical data Let-through values Description All ABB miniature circuit breakers substantially reduce the maximum letthrough current from the peak avail able short circuit current. I K - RMS current of fault I D - Max let-through of MCB V n - voltage V B - Arc voltage of MCB t k - Breaking time of MCB k 2 u B I D Let-through values I 2 t t k Sine half wave Hz = T/2 = 0ms U n S260-B S270-K S280-K For other curves, please contact ABB Control. Version I 2 t I Peak S260B TD9980 S260C TD998 S260D TD9982 S270K TD9972 TD99 S280K TD9978 S280Z TD9979 S290C TD998 Version Amps Time-current trip S260B 6-63 TD972 S270K 0. - 8 TD970 0-40 TD9706-63 TD9707 S280K 0.2-8 TD9708 0-40 TD9709-63 TD970 S280Z 0. - 63 TD97 Low Voltage Products & s.2 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
Technical data Temperature derating factors Terminal markings Type B, C, D Type K, Z Current carrying capacity of type B, C, D, K and Z thermal trip characteristics as a function of ambient tem per a ture. Terminal markings Input optional from top or bottom. 3 3 3N 3 7N 2 2 4 2 4 6 2 4N 2 4 6 8N Pole 2Pole 3Pole Pole&NA 3Pole&NA D 3 2 BELL ALARM 9 AUX SW C 22 96 98 2 2 I C2 U D2 H S/H A /A2 BM.26 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Technical data Breaker resistance values & wire size comparison Miniature circuit breaker resistance values Ampere Milliohms rating S260-B S270-K S280-K S280-Z 0.2 33300 0.3 9700 0. 6340 20 000 0.7 2400.0 390 2270.6 69 62 00 2 460 4 69 3 6 7 202 4 20 2 9 6 2 4. 04 8 38 33.8 3.9 0 3.3 2.6. 7. 2 3.3 2.6 6 7.0 7.7 8. 0.9 20 6.2 6.7.27 6.0 2.0 4.6 3.97 4. 32 3.6 3. 2.6 2.8 40 3.0 2.8 2.44 2..2...77 63.4 0.70 0.70.3 Comparison of IEC and AWG wire sizes mm AWG (mm ) Amps / UL Amps / IEC.0 8 6 (.3) 0. 2 (2.) 2. 20 2 (3.3) 20 4 2 0 (.3) 30 6 32 8 (8.4) 0 6 (3.3) 6 6 6 4 (2.2) 8 2 8 3 (26.7) 00 2 (33.6) 3 Ampacities for AWG wire are based on copper cable rated 7 C, except for 6AWG which is based on 60 C wire. Taken from UL8 Table 2.2. Consult applicable standards for futher detail and information. Low Voltage Products & s.27 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
Approximate dimensions S260, S270, S280, S290 00.00 00.00 Inches [Millimeters] S260 & S270 3.4 (90.0) 2.72 (69.0) 0.69 (7.) 0.69 (7.) 0.69 (7.) CL 2.07 (2.) 0.69 (7.) UPPER TERM..77 (4.0) LOWER TERM. CL 2.9 (74.9) 0.8 (.8) CL 2.68 (68.0) CL.46 (37.).98 (.2) S280 3.4 (90.0) 2.72 (69.0) 0.69 (7.) 0.69 (7.) 0.69 (7.) CL 2.07 (2.) 0.69 (7.) UPPER TERM..77 (4.0) LOWER TERM. CL 2.9 (74.9) 0.8 (.8) CL 2.68 (68.0).46 (37.).98 (.2) S290 Accessories mount to right side of MCB only.77 4.97.03 26 2.3 4.06 27 0.69 7. 0.3 9 0.3 9 3.9 8 -A, -A2 Shunt trip -H Auxiliary switch -S Bell alarm.28 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
00.00 00.00 Inches [Millimeters] Approximate dimensions Accessories Accessories Left side mtd Left or right side mtd H/S Bell alarm H_ Auxiliary switch A_ Shunt trip 3-pole MCB U_ Undervoltage trip 0.3 8.8 0.3 8.8 0.69 7. 0.69 7. MB-CL Front mounting clip.77 4 D C.L. 2.26 7..77 4 C.L. 0.69 7..38 3 2.07 2. MB-3PD Front mounting bracket 3.2 2.2(3P).43(2P).87 C L C L BREAKER CUT OUT 0.74(P) BKT. MT. HOLES 0.2 DIA. TYP 2 RHS2-M Handle mechanism 0.63 6 CL CL 2.07 2..38 3 0.83 2 3.4 90.77 4 3.26 82. 4.36 0.4 Low Voltage Products & s.29 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
Approximate dimensions Accessories 00.00 00.00 Inches [Millimeters] 2644 26 4.92 2 4.3 0 4.92 2 4.92 2 4.3 0 230 9.06 7.09 80 7.09 80 2646 262 4.92 2 4.3 0 6.30 60 6.09.32 3 9.84 2 7.09 80 2.60 320.30 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Cross-reference Older Suggested Physical Electrical version replacement comparison comparison series S60L S260B Same pole spacing Same trip char ac ter is tic as L S60K S270K Same pole spacing Same trip char ac ter is tic as K S270 is 6kA IC S20L S260B Same pole spacing Same trip char ac ter is tic as L S260B is 6kA IC S20K S280K Same pole spacing Same trip char ac ter is tic as K S280K is 6kA IC S20Z S280Z Same pole spacing Same trip char ac ter is tic as Z S2L S260B Same pole spacing Same trip char ac ter is tic as L S20-UCK S280UC-K Same pole spacing Same trip char ac ter is tic as K S20-UCZ S280UC-Z Same pole spacing Same trip char ac ter is tic as Z S220-K S0-K Different pole spacing Same trip char ac ter is tic as K S230-B S260-B Same pole spacing Same trip char ac ter is tic as B Many older styles of ABB miniature circuit breakers have been replaced by new and improved versions. Many of these newer styles can be directly interchanged, both electrically and physically, with the older version. There are also many international styles of ABB circuit breakers which are not normal stock items and may be interchanged with stocked ABB versions. Note: MCB types S260/270 and S280 can be raised to the same height as older style S20 series MCBs through the use of a height adjuster (SZ-ES68/83; $ 30 list per 20). The height adjustor snaps onto the DIN rail and raises the height of com po nents 68mm to match that of the S20 series (83mm). Low Voltage Products & s.3 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
Notes.32 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Miniature Circuit Breakers S280U Compact branch circuit protective MCCB UL 489 Listed as branch circuit protective MCCB S280U MCBs Description UL 489 Listed for branch circuit protection! ABB is pleased to announce our new S280U series of miniature circuit breakers -- all the functionality of molded case circuit breakers plus all the great features of miniature circuit breakers: Branch circuit protective device Compact DIN rail mount Current limiting, 2, & 3 pole Ring-tongue terminal option The ABB S280U series miniature circuit breakers are true UL489 listed compact molded case circuit breakers. They are suitable, per UL and the NEC, as branch circuit protective devices for circuits feeding either resistive or inductive loads including cables, duplex plugs, lighting, motors, transformers, and other loads where signifi cant levels of inrush current are possible. They can be applied in applications up to 240 VAC and are available in a wide range of current ratings, from 0.2 up to 63 amps. Both European and North American standard current sizes are available. Low Voltage Products & s.33 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
S280U Compact branch circuit protective MCCB S28U-K S28UX-K S282UX-K0 S283UX-K20 S28U-K_ S28UX-K_ S282UX-K_ S283UX-K_ -pole -pole 2-pole 3-pole Catalog List Box Catalog List Box Catalog List Box Catalog List Box number price Qty. number price Qty number price Qty number price Qty S28U-K0.2 $ 70 0 S28UX-K0.2 $ 70 6 S282UX-K0.2 $ 62 3 S283UX-K0.2 $ 244 2 S28U-K0.3 70 0 S28UX-K0.3 70 6 S282UX-K0.3 62 3 S283UX-K0.3 244 2 S28U-K0. 70 0 S28UX-K0. 70 6 S282UX-K0. 62 3 S283UX-K0. 244 2 S28U-K0.7 70 0 S28UX-K0.7 70 6 S282UX-K0.7 62 3 S283UX-K0.7 244 2 S28U-K 70 0 S28UX-K 70 6 S282UX-K 62 3 S283UX-K 244 2 S28U-K.6 70 0 S28UX-K.6 70 6 S282UX-K.6 62 3 S283UX-K.6 244 2 S28U-K2 70 0 S28UX-K2 70 6 S282UX-K2 62 3 S283UX-K2 244 2 S28U-K3 70 0 S28UX-K3 70 6 S282UX-K3 62 3 S283UX-K3 244 2 S28U-K4 70 0 S28UX-K4 70 6 S282UX-K4 62 3 S283UX-K4 244 2 S28U-K 70 0 S28UX-K 70 6 S282UX-K 62 3 S283UX-K 244 2 S28U-K6 70 0 S28UX-K6 70 6 S282UX-K6 62 3 S283UX-K6 244 2 S28U-K8 70 0 S28UX-K8 70 6 S282UX-K8 62 3 S283UX-K8 244 2 S28U-K0 70 0 S28UX-K0 70 6 S282UX-K0 62 3 S283UX-K0 244 2 S28U-K3 70 0 S28UX-K3 70 6 S282UX-K3 62 3 S283UX-K3 244 2 S28U-K 70 0 S28UX-K 70 6 S282UX-K 62 3 S283UX-K 244 2 S28U-K6 70 0 S28UX-K6 70 6 S282UX-K6 62 3 S283UX-K6 244 2 S28U-K20 70 0 S28UX-K20 70 6 S282UX-K20 62 3 S283UX-K20 244 2 S28U-K2 70 0 S28UX-K2 70 6 S282UX-K2 62 3 S283UX-K2 244 2 S28U-K30 74 0 S28UX-K30 74 6 S282UX-K30 70 3 S283UX-K30 24 2 S28U-K32 74 0 S28UX-K32 74 6 S282UX-K32 70 3 S283UX-K32 24 2 S28U-K40 78 0 S28UX-K40 78 6 S282UX-K40 76 3 S283UX-K40 266 2 S28U-K 88 0 S28UX-K 88 6 S282UX-K 206 3 S283UX-K 306 2 S28U-K60 00 0 S28UX-K60 00 6 S282UX-K60 232 3 S283UX-K60 344 2 S28U-K63 00 0 S28UX-K63 00 6 S282UX-K63 232 3 S283UX-K63 344 2 Ring tongue terminal compatible..34 Discount schedule CB2 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Technical data Approval UL489 UL File No. E22323 CE Marked Voltage 240 VAC, 2, and 3 pole Current ratings (A) 0.2, 0.3, 0., 0.7,,.6, 2, 3, 4,, 6, 8, 0, 3,, 6, 20, 2, 30, 32, 40,, 60, 63 Interrupting capacity (A) 0.2-2A: ka @ 240VAC,, 2, and 3 pole 30-63A: 0kA @ 240VAC,, 2, and 3 pole Frequency /60 Hz Terminals Dual function, up to (2) stripped wires plus fork style crimp terminals. Ring tongue terminal compatible Terminal range () 8-4 AWG or (2) 8-8 AWG (copper wire only) or () 8-4 AWG + () 8 - AWG Solid or stranded wire, or mixed Terminal torque 8 lb.in., combination fl at blade / No. 2 posi-drive screw Service life 20,000 operations at rated load HACR rating Heating, Air-Conditioning, and Refrigeration rating (marked on front of breaker) Ambient temperature 2 C Thermal release (A).0 -.3 x MCB amperage rating Magnetic release 8 -. x MCB amperage rating Operational temperature -2 to + C range.0.3 0,000 000 00 C. B. S 28 UX LISTED E22323 K2A ~240 V /60 Hz ka 2 Time in 0 UL489 HACR 0. 0.0.0 2 3 4 6 0 20 30 8. Current in multiples of breaker ampere rating Time Current trip curve Thermal release threshold:.0 -.3X Magnetic release threshold: 8 -.X Ambient calibration temperature: 2 C S28UX-K2 Scale : LISTED Low Voltage Products & s.3 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
Approximate dimensions 3.00 76 3.4 90.77 4 DIN RAIL 0.69 7..0 26.7 2.0 3.4 3. 80. S28U-K_ S28UX-K_ S282UX-K_ S283UX-K_ 2.4 64..99..36 Discount schedule CB0 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Miniature Circuit Breakers S0 Series S0 MCBs Description Increasing energy requirements result in larger short-circuit currents which place heavy demands on protective switchgear regarding safety, reliability and switching capacities. The S0 heavy-duty circuit breaker fulfi lls these requirements by virtue of its technical features. It is equipped with a thermal and/or electromagnetic release to protect circuits, motors, switchgear and systems from the effects of overload and short-circuit currents. For the worldwide market, the S0 breakers carry UL, CSA, IEC, CE and many other agency approvals. Features High breaking capacity Energy-limiting Current-limiting Extremely fast breaking time Optimal selectivity Various versions for special applications Compact dimensions, DIN cap size Easy and quick to install Easy to connect; fi nger safe terminals Wide range of accessories UL 077 recognized 600VAC and 0V versions Low Voltage Products & s.37 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
S0 277/600 VAC B UL 077 CSA C22.2 VDE 064 IEC 947-2 C UL 077 CSA C22.2 VDE 064 IEC 947-2 0,000 00 000 0 00 0 0. 0. 0.0 0.0 0,000 00 000 0 00 0 S-C6 S2-C6 S3-C0 AC B 2 3 7 0 20 30 C Rated Catalog List Delivery Weight current number price class (oz.) pc 6 S-B6 $ 68 0 S-B0 68 3 S-B3 68 6 S-B6 68 20 S-B20 68 2 S-B2 68 B 8.90 32 S-B32 68 40 S-B40 68 S-B 86 63 S-B63 202 6 S2-B6 328 0 S2-B0 328 3 S2-B3 328 6 S2-B6 328 20 S2-B20 328 2 S2-B2 328 B 7.8 32 S2-B32 328 40 S2-B40 328 S2-B 362 63 S2-B63 392 6 S3-B6 478 0 S3-B0 478 3 S3-B3 478 6 S3-B6 478 20 S3-B20 478 2 S3-B2 478 B 2.36 32 S3-B32 478 40 S3-B40 478 S3-B 26 63 S3-B63 74 D UL 077 CSA C22.2 VDE 064 IEC 947- Rated Catalog List Delivery Wgt. oz. current number price class ( Pc.) 3 S-D3 $ 90 6 S-D6 90 20 S-D20 90 2 S-D2 90 32 S-D32 90 B 8.90 40 S-D40 90 S-D 20 63 S-D63 226 3 S2-D3 372 6 S2-D6 372 20 S2-D20 372 2 S2-D2 372 32 S2-D32 372 B 7.8 40 S2-D40 372 S2-D 408 63 S2-D63 442 3 S3-D3 44 6 S3-D6 44 20 S3-D20 44 2 S3-D2 44 32 S3-D32 44 B 2.36 40 S3-D40 44 S3-D 600 63 S3-D63 646 Rated Catalog List Delivery Weight current number price class (oz.) pc 6 S-C6 $ 68 0 S-C0 68 3 S-C3 68 6 S-C6 68 20 S-C20 68 2 S-C2 68 B 8.90 32 S-C32 68 40 S-C40 68 S-C 84 63 S-C63 202 6 S2-C6 328 0 S2-C0 328 3 S2-C3 328 6 S2-C6 328 20 S2-C20 328 2 S2-C2 328 B 7.8 32 S2-C32 328 40 S2-C40 328 S2-C 362 63 S2-C63 392 6 S3-C6 478 0 S3-C0 478 3 S3-C3 478 6 S3-C6 478 20 S3-C20 478 2 S3-C2 478 B 2.36 32 S3-C32 478 40 S3-C40 478 S3-C 26 63 S3-C63 74 Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery 0,000 00 000 0 00 0 0. 0. 0.0 0.0 D AC 2 3 0 20 30 0. 0. 0.0 AC 0.0 2 3 0 8 20 30.38 Discount schedule CB0 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
S0 277/600 VAC S-D20 S2-D3 S3-K6 K 0,000 00 000 0 00 0 0. AC 0. 0.0 0.0 2 3 8 02 20 30 K UL 077 CSA C22.2 VDE 064 IEC-898 Rated Catalog List Delivery Wgt. oz. current number price class ( Pc.) 0. 0. S-K0. $ 82 0. 0.2 S-K0.2 82 0.2 0.3 S-K0.3 82 0.28 0.42 S-K0.42 82 0.38 0.8 S-K0.8 82 0.3 0.8 S-K0.8 82 0.73. S-K. 82. S-K. 82.4 2. S-K2. 82 2 3 S-K3 82 2.8 4.2 S-K4.2 82 B 8.90 3.8.8 S-K.8 82.3 8 S-K8 82 7.3 S-K 82 0 S-K 82 20 S-K20 82 8 26 S-K26 82 23 32 S-K32 202 29 37 S-K37 202 34 4 S-K4 226 38 4 S-K4 226 0. 0. S2-K0. 36 0. 0.2 S2-K0.2 36 0.2 0.3 S2-K0.3 36 0.28 0.42 S2-K0.42 36 0.38 0.8 S2-K0.8 36 0.3 0.8 S2-K0.8 36 0.73. S2-K. 36. S2-K. 36.4 2. S2-K2. 36 2 3 S2-K3 36 B 7.8 2.8 4.2 S2-K4.2 36 3.8.8 S2-K.8 36.3 8 S2-K8 36 7.3 S2-K 36 0 S2-K 36 20 S2-K20 36 8 26 S2-K26 36 23 32 S2-K32 392 29 37 S2-K37 392 34 4 S2-K4 442 38 4 S2-K4 442 0. 0. S3-K0. 8 0. 0.2 S3-K0.2 8 0.2 0.3 S3-K0.3 8 0.28 0.42 S3-K0.42 8 0.38 0.8 S3-K0.8 8 0.3 0.8 S3-K0.8 8 0.73. S3-K. 8. S3-K. 8.4 2. S3-K2. 8 2 3 S3-K3 8 B 2.36 2.8 4.2 S3-K4.2 8 3.8.8 S3-K.8 8.3 8 S3-K8 8 7.3 S3-K 8 0 S3-K 8 20 S3-K20 8 8 26 S3-K26 8 23 32 S3-K32 74 29 37 S3-K37 74 34 4 S3-K4 644 38 4 S3-K4 828 Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery Low Voltage Products & s Discount schedule CB0.39 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
S0UC 600 VAC/V SUC-B40 S2UC-B6 B UL 077 CSA C22.2 VDE 0660 Rated Catalog List Delivery Weight current number price class (oz.) pc 6 SUC-B6 $ 226 0 SUC-B0 226 3 SUC-B3 226 6 SUC-B6 226 20 SUC-B20 226 2 SUC-B2 226 C 8.90 32 SUC-B32 226 40 SUC-B40 226 SUC-B 28 63 SUC-B63 292 6 S2UC-B6 442 0 S2UC-B0 442 3 S2UC-B3 442 6 S2UC-B6 442 20 S2UC-B20 442 2 S2UC-B2 442 C 7.8 32 S2UC-B32 442 40 S2UC-B40 442 S2UC-B 2 63 S2UC-B63 68 Rated Catalog List Delivery Weight current number price class (oz.) pc 6 S3UC-B6 $ 646 0 S3UC-B0 646 3 S3UC-B3 646 6 S3UC-B6 646 20 S3UC-B20 646 2 S3UC-B2 646 C 2.36 32 S3UC-B32 646 40 S3UC-B40 646 S3UC-B 734 63 S3UC-B63 832 6 S4UC-B6 908 0 S4UC-B0 908 3 S4UC-B3 908 6 S4UC-B6 908 20 S4UC-B20 908 C 3.7 2 S4UC-B2 908 32 S4UC-B32 908 40 S4UC-B40 908 S4UC-B 030 63 S4UC-B63 64 Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery S3UC-B 0,000 00 B 000 0 00 0 0. 0. 0.0 AC 0.0 2 3 7 0 20 30.40 Discount schedule CB0 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
S0 UC 600 VAC/V K VDE UL 077 CSA C22.2 0660 SUC-K0. S2UC-K0. S3UC-K0. Rated Catalog List Delivery Weight current number price class (oz.) pc 0. 0. SUC-K0. $ 2 0. 0.2 SUC-K0.2 2 0.2 0.3 SUC-K0.3 2 0.28 0.42 SUC-K0.42 2 0.38 0.8 SUC-K0.8 2 0.3 0.8 SUC-K0.8 2 0.73. SUC-K. 2. SUC-K. 2.4 2. SUC-K2. 2 2 3 SUC-K3 2 2.8 4.2 SUC-K4.2 2 C 8.90 3.8.8 SUC-K.8 2.3 8 SUC-K8 2 7.3 SUC-K 2 0 SUC-K 2 20 SUC-K20 2 8 26 SUC-K26 2 23 32 SUC-K32 286 29 37 SUC-K37 286 34 4 SUC-K4 320 38 4 SUC-K4 320 0. 0. S2UC-K0. 488 0. 0.2 S2UC-K0.2 488 0.2 0.3 S2UC-K0.3 488 0.28 0.42 S2UC-K0.42 488 0.38 0.8 S2UC-K0.8 488 0.3 0.8 S2UC-K0.8 488 0.73. S2UC-K. 488. S2UC-K. 488.4 2. S2UC-K2. 488 2 3 S2UC-K3 488 C 7.8 2.8 4.2 S2UC-K4.2 488 3.8.8 S2UC-K.8 488.3 8 S2UC-K8 488 7.3 S2UC-K 488 0 S2UC-K 488 20 S2UC-K20 488 8 26 S2UC-K26 488 23 32 S2UC-K32 8 29 37 S2UC-K37 8 34 4 S2UC-K4 622 38 4 S2UC-K4 622 Rated Catalog List Delivery Weight current number price class (oz.) pc 0. 0. S3UC-K0. $ 72 0. 0.2 S3UC-K0.2 72 0.2 0.3 S3UC-K0.3 72 0.28 0.42 S3UC-K0.42 72 0.38 0.8 S3UC-K0.8 72 0.3 0.8 S3UC-K0.8 72 0.73. S3UC-K. 72. S3UC-K. 72.4 2. S3UC-K2. 72 2 3 S3UC-K3 72 2.8 4.2 S3UC-K4.2 72 C 2.36 3.8.8 S3UC-K.8 72.3 8 S3UC-K8 72 7.3 S3UC-K 72 0 S3UC-K 72 20 S3UC-K20 72 8 26 S3UC-K26 72 23 32 S3UC-K32 8 29 37 S3UC-K37 8 34 4 S3UC-K4 90 38 4 S3UC-K4 90 0. 0. S4UC-K0. 996 0. 0.2 S4UC-K0.2 996 0.2 0.3 S4UC-K0.3 996 0.28 0.42 S4UC-K0.42 996 0.38 0.8 S4UC-K0.8 996 0.3 0.8 S4UC-K0.8 996 0.73. S4UC-K. 996. S4UC-K. 996.4 2. S4UC-K2. 996 2 3 S4UC-K3 996 C 3.7 2.8 4.2 S4UC-K4.2 996 3.8.8 S4UC-K.8 996.3 8 S4UC-K8 996 7.3 S4UC-K 996 0 S4UC-K 996 20 S4UC-K20 996 8 26 S4UC-K26 996 23 32 S4UC-K32 2 29 37 S4UC-K37 2 34 4 S4UC-K4 276 38 4 S4UC-K4 276 Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery 0,000 00 S4UC-K0. UC-K 000 0 00 0 0. 0. 0.0 0.0 2 3 0 20 30 Low Voltage Products & s Discount schedule CB0.4 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
Accessories S0 S0-H Auxiliary contacts Electrical Catalog List Delivery Wgt. oz. accessories number price class (pc.) Auxiliary contacts N.O./ N.C. S0-H 2 N.O. S0-H20 $ 84 B 2. 2 N.C. S0-H02 For fi eld mounting left side Bell alarm with auxiliary contacts N.O./ N.C. S0-S 2 N.O. S0-S20 92 B 2. 2 N.C. S0-S02 For fi eld mounting left side Handle mechanism S0-RD3 00 B 6. For use with -4 pole S0 MCBs and disconnect switch selector handles with mm shafts Electrical Catalog List Delivery Wgt. oz. accessories number suffi x price class (pc.) Undervoltage release 2 V UA2 24 V UA24 48 V UA48 0 V UA0 230 V UA230 0 V UA0 Factory mount only. Shunt trip 2 V AL2 24 V AL24 48 V AL48 0 V AL0 230 V AL230 0 V AL0 Factory mount only. $ 266 B.7 224 B.7 Front mounting kit For pole S0-ME 60 2. to 3 poles S0-ME2 70 A 2.9 to 7 poles S0-ME3 80 3.6 Power feed terminal S0-K2 $ 2 A 2 Suggested order quantity is. Busbars Amp rating Number Busbar End cap Catalog List Delivery Suggested of length catalog number price class order qty. poles (mm) number quantity 2 S0-BB23 $ 6 3 28 S0-BB33 9 4 290 S0-BB43 32 A 363 S0-BB3 7 6 43 S0-BB63 208 Weight (ozs) Delivery Class A - Standard item, stock to 2 weeks lead time B - Stock to 4 weeks lead time C - 6 to 8 week lead time D - 0 to 2 week lead time E - Call for delivery.42 Discount schedule CB8 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Technical data S0 Item S0-B, C, D S0-K Approvals: UL 077 077 CSA C22.2 - No.23 C22.2 - No. 23 VDE 064/6.78 064/6.78 IEC 947-2 No. of poles:,2,3, +N, +NA,2,3, +N, +NA Tripping characteristic: B.C.D. K Rated currents: 6 to 63A 0. to 4A Rated voltage: UL/CSA single pole 277VAC 277VAC UL/CSA multi pole 600VAC 600VAC IEC single pole 690VAC 690VAC Rated interrupting capacity: Single pole 6-2A 30KA/240VAC 0.-2A 30KA/240VAC KA/277VAC KA/277VAC 32-63A 8KA/240VAC 26-4A 8KA/240VAC KA/277VAC KA/277VAC Multi-pole 6-63A KA/480VAC 0.-4A KA/480VAC 6KA/600VAC 6KA/600VAC Frequency: /60 Hz /60Hz Mounting position: optional optional Standard mounting: 3mm DIN rail 3mm DIN rail Terminals: Conductors from 6-4AWG Conductors from 6-4AWG (-2sq mm) (-2sq mm) Service life at rated load: 20,000 operations 20,000 operations Calibration temperature: 40 C 40 C Approvals: UL CSA VDE No. of poles: Tripping characteristic: Rated currents: Rated voltage: UL single pole UL multi pole IEC multi pole Item S0UC-B, K 077 C22.2 0660,2,3, 4 B, K B: 6 to 63A K: 0. to 4A 277VAC/2V 600VAC/600V 690VAC/7V Rated interrupting capacity: B single pole: 6 2A 8KA/240VAC KA/277VAC 30KA/2V 32 63A 30KA/240VAC KA/277VAC 30KA/2V B two-pole: 6 63A KA/480VAC 6KA/600VAC 30KA/0V B three-pole: 6 63A KA/480VAC 6KA/600VAC 30KA/600V K single pole: 0. 2A 30KA/240VAC KA/277VAC 30KA/2V 32 4A 8KA/240VAC KA/277VAC 30KA/2V K two-pole: 0. 4A KA/480VAC 6KA/600VAC 30KA/0V K three-pole: 0. 4A KA/480VAC 6KA/600VAC 30KA/600V Frequency: Mounting position: Standard mounting: Terminals: Service life at rated load: Calibration temperature: /60Hz optional 3mm DIN-rail Conductors from 6 to 4AWG (-2sq mm) 20,000 operations 40 C Low Voltage Products & s.43 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03
Approximate dimensions S0 Accessories 00.00 00.00 Inches [Millimeters] S0 2.9 7.97 0.98 2 3.64 92..73 44 3. 80 2.22 6..77 4 CL 2.9 7 3.62 92. 29 0.24 6 S0-RD3 Handle mechanism 3. 80.60 40.7 S0 Front mounting kit CL.8 46 2.9 74 4.4 2 2.00 CUT-OUT "L" CL 0.24 D 6D L + 0. 3 L L +.02 26 3.3 84 0.3 8.44 Low Voltage Products & s AC 600-3/03 ABB Inc. 888-38-22 www.abb-control.com
Residual current devices F370, F670 series 2 Pole 4 Pole Description RCDs provide ground fault equipment protection by monitoring the leakage of current to ground. The F370 and F670 series will trip when ground faults are detected in excess of the GF trip rating of the device. These devices provide GF pro tec tion only and are used in series with standard MCBs which provide overload and short circuit protection. The F370 and F670 series can be used as a main device providing GF protection for several MCB branch devices. The F370 and F670 series are UL03 recognized for use in 277/480VAC applications. The F372 is for use in single phase/two wire or two wire systems. The F374 is for use in three phase/four wire systems. The F370 and F670 series RCDs replace the F360 and F660 series with no change in form, fi t or function. The F370 and F670 have a profi le similar to the S2 MCBs and can be used with the MCB busbars. F370 F670 RCDs Low Voltage Products & s.4 ABB Inc. 888-38-22 www.abb-control.com AC 600-3/03