Round Duct System Accessories RR - accessories Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telefon 0 74 63-980 - 0 Telefax 0 74 63-980 - 200 info@schako.de www.schako.de
Round Duct System Accessories Round duct accessories Inhoud Description...3 Construction... 3 Accessories... 3 Models and dimensions...3 Dimensions... 3 Dummy pipe (-BR)... 3 End cover... 3 T-piece 90 (-ATE)... 4 Y-piece (-HSE)... 6 Connection sleeve (-M)... 6 Spigot (-BK)... 6 Asymmetric reduction piece (-UAE)... 7 Pressed bend (-BGE)... 8 Bent segment (-BSE)... 8 Order details...9 Specification texts...9 01/08-2 Version: 13.07.2018
Description In modern architecture, sheet metal and spiral ducts of air-conditioning systems are often incorporated in the design of the room. Emphasis is often placed deliberately on parts of the supply system. In this visible installation of the ventilation ducts, it is a good idea to integrate the air diffusers into the ducts. Accessories such as dummy pipes, end covers and connection sleeves complete the range of our round duct diffusers DBB-RR, DSA-RR, KG-RR and WGA-V-RR. Construction Dummy pipe (-BR) Stainless steel 1.4301 (V2A) painted in the colour sand silver - Pressed bend (-BGE) - available up to ø 315 mm Bent segment (-BSE) Spigot (-BK) Slanted end cover (-EA), only available upon request Straight end cover (-EG) Y-piece (-HSE) Asymmetric reduction piece (-UAE) Symmetric reduction piece (-USE) T-piece 90 (-ATE) Connection sleeve (-M) Accessories - a RAL colour of your choice - Rubber lip seal (-GD) - on both sides, made of EPDM Models and dimensions Dimensions Dummy pipe (-BR) Threaded rod on site Detail X M8 riveting nut Only applies to suspended installations from the ceiling: prepared for suspended installation from the ceiling by using an M8 threaded rod to be provided by the customer. Dummy pipe available in the same dimensions as the diffuser for round duct. End cover straight (-EG) outside slanted (-EA) Delivery and dimensions of the slanted end cover are only available upon request! End piece for mounting to round duct diffusers 01/08-3 Version 13.07.2018
T-piece 90 (-ATE) Available sizes ød1-ød3 [mm] L1 [mm] L3 [mm] 200-100 190 145 200-125 215 145 200-160 260 150 200-200 330 165 200-250 380 165 200-280 430 175 200-315 465 175 224-125 215 160 224-160 260 165 224-200 330 180 224-224 355 180 224-250 380 180 224-280 430 190 224-315 465 190 224-355 525 200 250-125 215 170 250-160 260 175 250-200 330 190 250-244 355 190 250-250 380 190 250-280 430 200 250-315 465 200 250-355 525 210 250-400 570 210 280-140 240 190 280-160 260 190 280-200 330 205 280-224 355 205 280-250 380 205 280-280 430 215 ød1-ød3 [mm] L1 [mm] L3 [mm] 280-315 465 215 280-355 525 225 280-400 570 225 280-450 620 225 315-160 260 210 315-200 330 225 315-224 355 225 315-250 380 225 315-280 430 235 315-315 465 235 315-355 525 245 315-400 570 245 315-450 620 245 315-500 680 250 355-180 280 230 355-200 330 245 355-224 355 245 355-250 380 245 355-280 430 255 355-315 465 255 355-355 525 255 355-400 570 265 355-450 620 265 355-500 680 270 355-560 740 270 400-200 330 265 400-224 355 265 400-250 380 265 400-280 430 275 400-315 465 275 400-355 525 285 400-400 570 285 400-450 620 285 400-500 680 290 400-560 740 290 400-630 810 290 450-200 330 290 450-224 355 290 450-250 380 290 450-280 430 300 450-315 465 300 450-355 525 310 450-400 570 310 450-450 620 310 450-500 680 315 01/08-4 Version: 13.07.2018
Available sizes ATE 450-560 to 900-900 (ød1-ød3) ød1-ød3 [mm] L1 [mm] L3 [mm] 450-560 740 315 450-630 810 315 450-710 890 315 500-200 330 315 500-224 355 315 500-250 380 315 500-280 430 325 500-315 465 325 500-355 525 335 500-400 570 335 500-450 620 335 500-500 680 340 500-560 740 340 500-630 810 340 500-710 890 340 500-800 980 340 560-200 330 345 560-224 355 345 560-250 380 345 560-280 430 355 560-315 465 355 560-355 525 365 560-400 570 365 560-450 620 365 560-500 680 370 560-560 740 370 560-630 810 370 560-710 890 370 560-800 980 370 560-900 1080 370 630-200 330 380 630-224 355 380 630-250 380 380 630-280 430 390 630-315 465 390 630-355 525 400 630-400 570 400 630-450 620 400 630-500 680 405 630-560 740 405 630-630 810 405 630-710 890 405 630-800 980 405 ød1-ød3 L1 [mm] L3 [mm] 630-900 1080 405 710-250 380 420 710-280 430 430 710-315 465 430 710-355 525 440 710-400 570 440 710-450 620 440 710-500 680 445 710-560 740 445 710-630 810 445 710-710 890 445 710-800 980 445 710-900 1080 445 800-250 380 465 800-280 430 475 800-315 465 475 800-355 525 485 800-400 570 485 800-450 620 485 800-500 680 490 800-560 740 490 800-630 810 490 800-710 890 490 800-800 980 490 800-900 1080 490 900-315 465 525 900-355 525 535 900-400 570 535 900-450 620 535 900-500 680 540 900-560 740 540 900-630 810 540 900-710 890 540 900-800 980 540 900-900 1080 540 The inserted length can be found on page 6. 01/08-5 Version 13.07.2018
Y-piece (-HSE) Available sizes HSE ød1-ød2 [mm] 200-140 224-160 250-180 355-250 400-280 630-450 710-500 Other dimensions and angles available on request. Connection sleeve (-M) - To connect round duct diffuser to round duct diffuser: a = 70 mm (standard) - To connect round duct diffuser to DIN accessories: ød = 200-224 : a = 75 mm ød = 250-355 : a = 95 mm ød = 400-630 : a = 115 mm ød = 710-900 : a = 135 mm - When ordering, the a dimension must be specified. Unless stated otherwise in the order, the connection sleeves will be delivered with the standard a dimension of 70 mm. - The maximum a dimension available is: - for ø100-630 => 170mm - for ø710-900 => 200mm - The connection sleeve is not an airtight connection of the pipes. In order to achieve an airtight connection, sealing must take place on-site or a rubber lip seal (GD) at the round duct must be ordered at an extra charge. Spigot (-BK) Mounting on site outside Inserted length ød1-ød2 [mm] L2 [mm] or ød1-ød3 [mm] ø100-ø224 40 ø250-ø355 60 ø400-ø630 80 ø710-ø900 100 01/08-6 Version: 13.07.2018
Symmetric reduction piece (-USE) Asymmetric reduction piece (-UAE) Available sizes USE/UAE ød1-ød2 L1 [mm] 200-100 167 200-125 133 200-160 85 224-125 166 224-160 118 224-200 63 250-125 202 250-160 154 250-200 99 250-224 66 280-160 195 280-200 140 280-224 107 280-250 71 315-160 243 315-200 188 315-224 155 ød1-ød2 L1 [mm] 315-250 119 315-280 78 355-200 243 355-224 210 355-250 174 355-280 133 355-315 85 400-200 310 400-224 277 400-250 241 400-280 200 400-315 152 400-355 97 450-250 310 450-280 269 450-315 220 450-355 166 450-400 109 500-250 378 500-280 337 500-315 289 500-355 234 500-400 177 500-450 109 560-400 260 560-450 191 560-500 122 630-450 287 630-500 219 630-560 136 710-500 333 710-560 251 710-630 155 800-560 375 800-630 279 800-710 174 900-630 416 900-710 311 900-800 187 The inserted length can be found on page 6. 01/08-7 Version 13.07.2018
Pressed bend (-BGE) Bent segment (-BSE) a = 30 / 45 / 90 available up to ø 315 mm (ød1) a = 15 / 30 / 45 / 60 / 90 available from ø355 a ø900 (ød1) Bends with different degree figures will be supplied as bent segments. Available sizes BGE ød1 [mm] L2 [mm] 200 40 224 40 250 60 280 60 315 60 Available sizes BSE ød1 [mm] L2 [mm] 355 60 400 80 450 80 500 80 560 80 630 80 710 100 800 100 900 100 01/08-8 Version: 13.07.2018
Order details Dummy pipe -BR T-piece 90 -ATE symmetric -USE straight -EG pressed -BGE available up to ø 315mm Accessories: RAL colour of your choice Connection sleeve -M Reduction piece End cover Bend Spigot -BK Y-piece -HSE asymmetric -UAE slanted -EA (only available on request) segment -BSE available from ø355 to ø900 Rubber lip seal -GD Specification texts - Dummy pipe (-BR) consisting of: - Bend - pressed (-BGE) (available up to ø 315 mm) - Segment (-BSE) (available from ø355 to ø900) consisting of: - Spigot (-BK) consisting of: - End cover - straight (-EG) - slanted (-EA), only available on request consisting of: - Stainless steel 1.4301 (V2A) painted in the colour sand silver - Y-piece (-HSE) consisting of: - Reduction piece - symmetric (-USE) - asymmetric (-UAE) consisting of: - T-piece 90 (-ATE) consisting of: - Connection sleeve (-M) consisting of: - Stainless steel 1.4301 (V2A) Accessories (at an extra charge): - a RAL colour of your choice - Rubber lip seal (-GD) - on both sides, made of EPDM 01/08-9 Version 13.07.2018