FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS 1 M1 20 Issue 4/99 DESIGN FEATURES Size range DN... 300. For larger sizes, DN 350-400, select series MP, MA, or MT. PN 10, 16, and 40. Pressure classes Tightness Separate ball and shaft assure good tightness even with metal seats, at low shut-off pressure. Bubble tight shut-off with soft seats. Versions, details Neles Controls has extended the scope of the flanged ball valve series of MBV. The latest addition M1, is designed particularly for the metric PN pressure ratings. Valve design follows the ISO-standards and all threadings are metric. The construction uses same valve internals as earlier developed MA, MT-series. The proven special shaft/ball joint enables M1 to be used in the most demanding applications and also assures tight shut-off even with the lowest pressure differentials. The material and seat selection of M1 makes it possible to choose the most suitable M1 combination according to customers specification. Applications Pulp mill applications: Digesters and fiberlines Liquor service Chemical recovery Sludge treatment TMP-plants. Deinking and recycling plants. Paper mill applications. Other process industry applications V-ring gland packing ensures long maintenance-free operation. Spiral wound body joint gasket. TA-Luft packing option. Q-trim option. Scraping seat as standard, can be locked. Splined ball/shaft connection for good torque transmission. Internals (ball, ball seats, body inserts) are equal and interchangeable with the series MP, MA, and MT. Metric threading Full bore High C v per nominal size. Straight ball opening means low flow resistance. True full bore ball (cylindrical flow path). Minimized emissions Uninterrupted circular spiral wound body gasket. No bending forces to gland packing. TA-Luft gland packing.
N E L E S C O N T R O L S EXPLODED VIEW 2 65 3 7 63 70 5 78 79 2 16 12 3 50 4 70 63 7 7 63 65 3 7 63 62 113 40 5 10 70 16 12 2 63 7 3 4 51 7 63 65 62 113 3 7 63 18 14 9 69 DN - 40 1 14 42 9 18 67 10 5 51 69 1 DN50-969 14 18 67 DN0-300 1 42 PARTS LIST Item Part description Material 1 Body Stainless steel CF8M (~W-no. 1.4408) / CG8M (~W-no. 1.4448) 2 Body cap DN 50... 300 Stainless steel CF8M (~W-no. 1.4408) / CG8M (~W-no. 1.4448) Body insert DN,40 Stainless steel CF8M (~W-no. 1.4408) / CG8M (~W-no. 1.4448) 3 Ball / Q-Trim ball Stainless steel AISI 316/CF8M (~W-no. 1.4408) / CG8M (~W-no. 1.4448) 4 Spline driver DN50... 300 Stainless steel CF8M (~W-no. 1.4408) 5 Stem Stainless steel XM-19 7 Seat Stainless steel + cobalt based alloy / or filled 9 Gland Stainless steel CF8M (~W-no. 1.4408) 10 Key Stainless steel AISI 329 12 Stud Stainless steel A2 ISO 3506 14 Stud Stainless steel A2 ISO 3506 16 Hexagon nut Stainless steel A2 ISO 3506 18 Hexagon nut Stainless steel A2 ISO 3506 Seat (E) Stainless steel + cobalt based alloy 40 Locking ring DN 0 - DN 300 Stainless steel AISI 316 42 Retainer plate Stainless steel AISI 316 50 Cylindrical pin Stainless steel AISI 316 51 Retaining ring UNS N066 62 Spring UNS N066 63 Back seal 65 Body gasket Stainless steel AISI 316 + or graphite filled spiral wound 67 Thrust ring Stainless steel AISI 316 69 Packing or graphite 70 Thrust bearing + graphite 78 Hexagon bolt Stainless steel AISI 316 79 Gasket or graphite 113 Back seal FKM (O-ring) as standard, + polyester (lip seal) optional - 2 -
F L A N G E D F U L L B O R E M B V B A L L V A L V E, S E R I E S M 1 F O R P N R A T I N G S TECHNICAL SPECIFICATION Product type Full bore, seat supported ball valve. Separate ball and shaft. Split body design in DN 50 300. One piece body in DN and 40. Flanged. DIN PN 10, 16,, 40. Pressure ratings Certification EN/DIN 50049 3.1B material certificates for body and bonnet. Tightness test certificate on request. TA-Luft packing construction. Degreasing. Q-Trim. Standard options DN 300. Size range See bulletin 1MBV for sizes. DN 65 and DN 1: series MP DN 350 and DN 400: series MP, MA or MT. Valve testing Each valve is tested for body integrity and seat tightness. The body test pressure is 1.5 x PN. The seat test pressure for metal seated valves is 1.1 x PN. The seat test pressure for soft seats is 6 bar. The test medium is inhibited water. Air test upon request. Temperature range -50 C +0 C. Depending on the seat material. Design standards Valve body DIN 3840, ISO 7121 Valve flanges ISO / DIN PN 10-40 Face-to-face ISO 5752. Basic series 3, 4 or 12 depending on size and pressure class. Body Ball Bearings Seats Seals/gaskets Body gasket Gland packing Standard materials CF8M. CF8M + hard chrome. + graphite. stainless steel + cobalt based alloy, or filled., graphite, FKM. Spiral wound with or graphite filler. (V-rings), graphite. Valve tightness ISO 5208 Rate D for metal seats as standard. Soft seated valves are bubble tight. Other tightness rates upon request. Valve size DN C v (K v ) -values and resistance coefficients M1 M1 with Q-Trim C v 90 K v 90 ξ 90 C v 90 K v 90 105 91 0.08 40 0 220 0.07 50 490 4 0.06 84 73 80 1160 1000 0.05 245 210 100 2 1900 0.05 530 460 150 5100 4400 0.04 1360 1180 9300 8000 0.04 2330 2020 0 15 13 0.04 3920 3400 300 22400 19400 0.03 5600 4850 Bolting A2 or A4, ISO 3506-3 -
N E L E S C O N T R O L S General scraping seat S STANDARD SEAT OPTIONS Scraping seat E for low p-applications Body Body cap Non-compressed form of the back seal. Materials: Seats Stainless steel + cobalt based alloy Seals Temperature range -50 C...+230 C Size range DN - 300 Note DN and 40: Seat in other side integral with body insert PREFERRED TIGHTNESS DIRECTION Material: Seats Stainless steel + cobalt based alloy Locked seals Spring assisted seals FKM or + polyester Springs UNS N066 Temperature range -50 C...+ C or +230 C Maximum p 16 bar. Note Available only on sizes DN 50-300 Locked scraping seat K Soft seat M, for general use DN - Non-compressed form of the back seal. Materials: Seats Stainless steel + cobalt based alloy Seals Temperature range -50 C...+230 C Size range DN - 300 Note DN and 40: Seat in other side integral with body insert Locked scraping seat C Materials: Seats CK-3MCuN + cobalt based alloy Seals Temperature range -50 C...+230 C DN 0-300 Material reinforced with carbon fibres Temperature range -50 C...+260 C, DN - 100-50 C...+230 C, DN 150-300 Soft seat T, for oxygen, peroxide etc applications Material Temperature range -50 C...+204 C Size range DN - 300 Note DN and 40: Seat in other side integral with body insert For temperatures over the specified ranges up to 300 C contact Neles Controls. Note: Max. operating pressure differentials for each seat type, see page 5-4 -
F L A N G E D F U L L B O R E M B V B A L L V A L V E, S E R I E S M 1 F O R P N R A T I N G S VALVE SEAT RATINGS Maximum operating pressure for soft seats Maximum operating pressure for metal seats P (bar) 50 P (bar) 50 40 Seat M Seat T 40 30 DN - 100 DN - 100 30 DN - 50 20 10 DN 150 DN DN DN 150 20 10 DN 80-300 0 DN 0 & 300 DN 0 & 300 0 50 100 150 0 300 T ( C) 0 0 100 300 T ( C) Soft seat ratings are based on differential pressure with the valve ball in fully closed position and refer seats only. Seat ratings shall never exceed body ratings (see below). VALVE BODY RATINGS CF8M and CG8M Pressure/temperature curves of valve body PN 10/16//40 P (bar) 50 40 PN 40 30 20 10 PN PN 16 PN 10 0 0 100 300 T ( C) - 5 -
N E L E S C O N T R O L S ACTUATOR SELECTION MBV-valve can be equipped with the following Neles Controls actuator types: B1C/B1 Pneumatic double acting or spring return actuator. Actuators available for size range DN - 300. DC/D Pneumatic double acting or spring return actuator. Actuators are available for size range DN - 40 as standard. Other sizes per request. M M-series manual gear operator for valve sizes DN -0. LK Hand lever for valve sizes DN -100. When selecting other than Neles Controls actuators please contact your local Neles Controls representative. For the correctactuator selection you need to know the following process data: - valve size and seat type - supply pressure for the actuator - maximum operating differential pressure over the valve in closed position Actuators are selected from the tables the following way - left hand column shows the valve size - on the top line the possible actuator alternatives are shown - the instrument air supply pressure is in the left column Note! there are four possibilities; 3, 4, 5 and 6 bar in doubleacting actuators. - in the area marked with darker blue colour the maximum possible operating pressure differential values are given. Actuators shall be chosen so that the operating pressure differential in pipeline does not exceed the values given in the tables. Note! Extremely difficult mediums (MC-pulp, black, green and white liquor) must be taken in account separately. To determine the increase of torque caused by sticky flow media consult the Nelprof Expert System. DN Shaft 11 40 14 50 Ø 80 Ø 100 Ø 35 150 Ø 45 Ø 55 0 Ø 65 300 Ø 75 Supply [bar] MAXIMUM DIFFERENTIAL OPERATING PRESSURE. METAL SEATED VALVE WITH DOUBLE ACTING ACTUATOR, TYPE DC AND B1C. DC [SIZE / BORE] B1C [SIZE / BORE] 10 / 11 20 / 14 30 / 14 6 / 9 / 11 / 11 / 35 13 / 35 17 / 45 20 / 70 20 / 55 / 95 32 / 95 32 / 105 40 / 105 3 23 40 4 35 40 5 40 40 6 40 40 3 19 40 4 27 40 5 35 40 6 40 40 3 15 (6) 29 (16) 4 21 (10) 40 (16) 5 27 (14) 40 (16) 6 33 (16) 40 (16) 3 9 18 (9) 4 12 (5) 24 (13) 5 15 (7) (16) 6 19 (10) (16) 3 7 15 (8) 4 9 21 (11) 5 12 (6) (15) 6 15 (7) (16) 3 9 (7) 11 (9) 4 12 (10) 15 (13) 5 15 (13) 19 (16) 6 18 (16) 24 (16) 3 5 (7) 10 (15) 4 7 (8) 14 (16) 5 9 (11) 16 (16) 6 10 (14) 16 (16) 3 5 11 (7) 4 7 (5) 15 (10) 5 9 (6) 16 (13) 6 11 (7) 16 (15) 3 7 (5) 14 (10) 4 9 (7) 16 (13) 5 12 (9) 16 (16) 6 14 (10) 16 (16) Values in parenthesis for E-type seat, max. differential pressure 16 bar - 6 -
F L A N G E D F U L L B O R E M B V B A L L V A L V E, S E R I E S M 1 F O R P N R A T I N G S MAXIMUM DIFFERENTIAL OPERATING PRESSURE. METAL SEATED VALVE WITH SPRING RETURN ACTUATOR, TYPE D, DA B1, AND B1A. - B1 spring to close, minimum supply pressure 4 bar - B1A spring to open, minimum supply pressure 5 bar - D spring to close, minimum supply pressure 5 bar - DA spring to open, minimum supply pressure 5 bar DN Shaft Type D,DA_SR5 [SIZE/BORE] SOFT SEATED VALVE WITH DOUBLE ACTING ACTUATOR, TYPE DC AND B1C. - 7 - B1, B1A [SIZE/ BORE] 10 / 11 20 / 14 30 / 14 8 / 10 / 12 / 12 / 35 16 / 35 16 / 45 20 / 55 20 / 70 / 70 / 95 32 / 95 32 / 105 11 D/ DA 15 37 40 14 D/ DA 11 34 50 Ø B1 22 (12) 40 (16) B1A 33 (16) 40 (16) 80 Ø B1 16 (10) (16) B1A 22 (16) (16) 100 Ø 35 B1 13 (8) (12) B1A 18 (12) (12) 150 Ø 45 B1 8 (7) 16 (15) (16) B1A 11 (10) 23 (16) (16) Ø 55 B1 7 (5) 15 (10) B1A 10 (7) 16 (15) 0 Ø 65 B1 8 (5) 16 (11) B1A 11 (7) 16 (15) 300 Ø 75 B1 10 (7) B1A 14 (9) Values in parenthesis for E-type seat, max. differential pressure 16 bar DN Shaft Supply [bar] DC [SIZE / BORE] B1C [SIZE / BORE] 10 / 11 20 / 14 30 / 14 6 / 9 / 11 / 35 13 / 35 17 / 45 20 / 55 / 95 32 / 105 3 40 (40) 11 4 40 (40) 5 40 (40) 6 40 (40) 3 30 (21) 40 (40) 40 14 4 40 (28) 40 (40) 5 40 (40) 40 (40) 6 40 (40) 40 (40) 3 40 (40) 50 Ø 4 40 (40) 5 40 (40) 6 40 (40) 3 30 (29) 80 Ø 4 40 (40) 5 40 (40) 6 40 (40) 3 21 (14) 40 (40) 100 Ø 35 4 29 (19) 40 (40) 5 40 (30) 40 (40) 6 40 (40) 40 (40) 3 20* (20)* 150 Ø 45 4 20* (20)* 5 20* (20)* 6 20* (20)* 3 11 20* (20)* Ø 55 4 15 20* (20)* 5 20* (6) 20* (20)* 6 20* (20)* 20* (20)* 3 10* 0 Ø 65 4 10* (10)* 5 10* (10)* 6 10* (10)* 3 10* (10)* 300 Ø 75 4 10* (10)* 5 10* (10)* 6 10* (10)* * Max. differential pressure with soft seats. Values in parenthesis for M-type seat
N E L E S C O N T R O L S MAXIMUM DIFFERENTIAL OPERATING PRESSURE. SOFT SEATED VALVE WITH SPRING RETURN ACTUATOR, TYPE D, DA B1, AND B1A. - B1 spring to close, minimum supply pressure 4 bar - B1A spring to open, minimum supply pressure 5 bar - D spring to close, minimum supply pressure 5 bar - DA spring to open, minimum supply pressure 5 bar D, DA_SR5 [SIZE/BORE] B1, B1A [SIZE/ BORE] DN Shaft Type 10 / 11 20 / 14 30 / 14 8 / 10 / 10 / 35 12 / 35 16 / 45 20 / 55 / 55 / 95 32 / 95 32 / 105 11 D/ DA 40 (40) 40 (40) 40 14 D/ DA 34 (30) 40 (40) B1 40 (40) 50 Ø B1A 40 (40) B1 23 (20) 40 (40) 80 Ø B1A 37 (36) 40 (40) B1 20 (14) 40 (36) 100 Ø 35 B1A 23 (16) 40 (40) B1 20* (20)* 150 Ø 45 B1A 20* (20)* B1 20* (20)* 20* (20)* Ø 55 B1A 20* (20)* 20* (20)* B1 10* (6) 10* (10)* 0 Ø 65 B1A 10* (7) 10* (10)* B1 10* (10)* 300 Ø 75 B1A 10* (10)* * Max. differential pressure with soft seats. Values in parenthesis for M-type seat MAXIMUM DIFFERENTIAL OPERATING PRESSURE WITH MANUAL GEAR OPERATOR FOR METAL SEATED VALVES. MAXIMUM DIFFERENTIAL OPERATING PRESSURE WITH MANUAL GEAR OPERATOR FOR SOFT SEATED VALVES. DN SHAFT M7 M10 M12 M14 M15 M16 WTRC60 11 40 (16) 40 14 40 (16) 50 Ø 40 (16) 80 Ø 18 (13) 32 (16) 40 (16) 100 Ø 35 40 (16) 150 Ø 45 15 (13) 18 (16) Ø 55 8 (6) 15 (10) 0 Ø 65 8 (5) 300 Ø 75 16 (10) Values in parenthesis for E-type seat, max p 16 bar. Drive bush is always used to fit valve shaft and gear operator bore. DN SHAFT M7 M14 M15 M16 WTRC60 11 40 40 14 40 50 Ø 40 80 Ø 40 100 Ø 35 40 150 Ø 45 20* Ø 55 20* 0 Ø 65 10* 300 Ø 75 10* * Maximum differential operating pressure with soft seats. Drive bush is always used to fit valve shaft and gear operator bore. - 8 -
F L A N G E D F U L L B O R E M B V B A L L V A L V E, S E R I E S M 1 F O R P N R A T I N G S DIMENSIONS N DIMENSIONS OF MOUNTING FACE ACC. TO ISO 5211 SQUARE HEAD D ACC. TO DIN 3337 R N P M ø O E E ø B DN ø B1 ø B DN S V, 1 pcs A A1 U V U, 3 pcs DN AND DN40 DN50 - DN300 VALVES WEIGHT [kg] DN TYPE PN CLASS A A1 ØB ØB1 E M N O P R S T U V M1 Q-M1 (10, 16,,) 40 165 80.0 115-119 - 14 11 - - 50 F05 Ø7 M8 5-40 (10, 16,,) 40 165 87.0 150-142 - 17 14 - - 70 F07 Ø9 M10 8-50 (10, 16,,) 40 178 79 165 146 215 6.35 46 Ø 27.8 137 110 32 M12 M10 13 14 M1M 80 (,) 40 282 141 195 237 6.35 46 Ø 27.8 137 110 32 M12 M10 30 32 100 (,) 40 305 152.5 235 2 309 9.52 58 Ø 35 39.1 169 130 32 M12 M10 55 58 150 (,) 40 403 201.5 300 346 386 12.70 80 Ø 45 50.4 201 160 40 M16 M14 120 130 502 1 360 432 476 12.70 90 Ø 55 60.6 231 160 55 M20 M14 220 240 0 M1L 568 284 4 512 555 15.87 112 Ø 65 71.9 263 230 90 M24 M20 310 350 300 648 324 485 584 660 19.05 134 Ø 75 83.1 3 307 120 M30 M20 470 5 80 (10,) 16 203 101.5 184 237 6.35 46 Ø 27.8 137 110 32 M12 M10 27 100 (10,) 16 229 114.5 220 236 309 9.52 58 Ø 35 39.1 169 130 32 M12 M10 50 53 150 (10,) 16 394 197 285 338 386 12.70 80 Ø 45 50.4 201 160 40 M16 M14 100 110 M1K 16 457 228.5 340 426 476 12.70 90 Ø 55 60.6 231 160 55 M20 M14 170 190 0 16 533 266.5 405 512 555 15.87 112 Ø 65 71.9 263 230 90 M24 M20 290 330 300 16 610 305 460 584 660 19.05 134 Ø 75 83.1 3 307 120 M30 M20 440 495 10 457 228.5 340 426 476 12.70 90 Ø 55 60.6 231 160 55 M20 M14 170 190 0 M1 10 533 266.5 405 512 555 15.87 112 Ø 65 71.9 263 230 90 M24 M20 290 330 300 10 610 305 460 584 660 19.05 134 Ø 75 83.1 3 307 120 M30 M20 440 495-9 -
N E L E S C O N T R O L S F DIMENSIONS NPT H ISO 228 X H NPT MOUNTING POSITION A-VU SHOWN. VALVES WITH LIMIT SWITCH NI/NK. V X I G F DN - DN40 WITH D- ACTUATOR DN50 - DN300 WITH B1- ACTUATOR DIMENSIONS OF VALVE + DOUBLE ACTING ACTUATOR, TYPE DC AND B1C DN TYPE ACTUATOR / MOUNTING F G H I max* V X NPT ISO228 WEIGHT[kg] DC10 / F05 152-265 0 147-83 - 1/4 10 DC20 / F05 202-285 300 155-100 - 1/4 11 40 DC20 / F07 202-320 300 175-100 - 1/4 15 40 DC30 / F07 271-345 310 188-1 - 1/4 20 50 M1M B1C6 / F07 400 260 345 310 226 36 90 1/4-20 50 B1C9 / F07 455 315 355 310 227 43 110 1/4-80 B1C11 / F10 540 375 435 320 5 51 135 3/8-50 100 B1C13 / F12 635 445 545 340 331 65 175 3/8-90 150 B1C20 / F14 840 575 700 375 420 97 215 1/2 - B1C / F16 1040 710 875 395 523 121 265 1/2-360 0 M1L B1C32 / F 1330 910 1070 435 617 153 395 3/4-570 300 B1C40 / F30 1660 1150 13 455 780 194 505 3/4-950 80 B1C9 / F07 455 315 395 310 249 43 110 1/4-40 100 B1C11 / F10 540 375 515 320 315 51 135 3/8-65 150 B1C17 / F14 770 545 680 355 401 78 215 1/2-160 M1K B1C / F16 1040 710 870 395 523 121 265 1/2-310 0 B1C32 / F 1330 910 1070 435 617 153 395 3/4-550 300 B1C40 / F30 1660 1150 13 455 780 194 505 3/4-910 B1C20 / F14 840 575 820 375 500 97 215 1/2-0 0 M1 B1C / F16 1040 710 970 395 580 121 265 1/2-430 300 B1C32 / F 1330 910 1220 435 730 153 395 3/4-700 DIMENSIONS OF VALVE + SPRING RETURN ACTUATOR, TYPE D, DA B1, AND B1A DN TYPE ACTUATOR / MOUNTING F G H I max* V X NPT ISO228 WEIGHT [kg] D10/DA10 / F05 152-265 245 147-83 - 1/4 10 D20/DA20 / F05 202-285 300 155-100 - 1/4 11 40 D20/DA20 / F07 202-320 300 175-100 - 1/4 15 40 D30/DA30 / F07 271-345 310 188-1 - 1/4 20 50 M1M B1/B1A8 / F07 560 420 370 300 227 43 135 3/8-30 50 B1/B1A10 / F10 650 490 395 305 233 51 175 3/8-40 80 B1/B1A12 / F12 800 620 475 315 271 65 215 1/2-85 100 B1/B1A16 / F14 990 760 605 335 346 78 265 1/2-150 150 B1/B1A20 / F14 1 935 790 350 420 97 395 3/4-290 B1/B1A / F16 1530 1 990 390 523 121 505 3/4-540 0 M1L B1/B1A32 / F 1830 1410 1145 430 617 153 540 1-1020 300 B1/B1A32 / F 1830 1410 1290 430 730 153 540 1-1180 80 B1/B1A10 / F10 650 490 435 305 5 51 175 3/8-50 100 B1/B1A12 / F12 800 620 560 315 331 65 215 1/2-100 150 B1/B1A16 / F14 990 760 705 335 401 78 265 1/2 - M1K B1/B1A / F16 1530 1 990 390 523 121 505 3/4-490 0 B1/B1A32 / F 1830 1410 1145 430 617 153 540 1-1000 300 B1/B1A32 / F 1830 1410 1290 430 730 153 540 1-1150 B1/B1A20 / F14 1 935 910 350 500 97 395 3/4-340 0 M1 B1/B1A / F16 1530 1 1090 390 580 121 505 3/4-610 300 B1/B1A32 / F 1830 1410 1290 430 730 153 540 1-1150 - 10 -
F L A N G E D F U L L B O R E M B V B A L L V A L V E, S E R I E S M 1 F O R P N R A T I N G S DIMENSIONS VALVE + MANUAL GEAR OPERATOR X X ) R SR øz øz V V H G1 F1 MOUNTING POSITION B-HR H G1 F1 G2 F2 X ) DN - DN40 DN50 - DN0 øz V G F H DN300 DIMENSIONS VALVE + MANUAL GEAR OPERATOR DN TYPE ACTUATOR / MOUNTING DIMENSIONS F1 G1 F2 G2 H V ØZ M07 / F05 196 152 - - 132 2 39 1 9 40 M07 / F07 196 152 - - 152 260 39 1 12 50 M07 / F07 196 152 - - 195 300 39 1 20 80 M1M M10 / F10 227 169 297 239 2 355 52 40 80 M12 / F12 285 210 357 282 232 370 67 0 45 100 M14 / F14 378 279 453 354 300 470 90 457 75 150 M15 / F16 457 331 532 406 355 585 123 457 150 0 M1L M16 / F 549 391 624 466 492 830 154 610 360 WEIGHT [KG] M16 / F16 549 391 624 466 435 730 154 610 265 300 WTRC60 / F 536 376 - - 760 1015 128 610 690 80 M07 / F07 196 152 - - 217 340 39 1 100 M14 / F14 378 279 453 354 300 465 90 457 70 150 M14 / F14 378 279 453 354 355 570 90 457 120 150 M1K M15 / F16 457 331 532 406 355 580 123 457 135 M16 / F16 549 391 624 466 435 7 154 610 215 0 M16 / F 549 391 624 466 492 830 154 610 330 300 WTRC60 / F 536 376 - - 760 1015 128 610 660 M15 / F16 457 331 532 406 435 705 123 457 0 M1 M16 / F 549 391 624 466 492 830 154 610 330 300 WTRC60 / F 536 376 - - 760 1015 128 610 660 * ) Actuators can be equipped with extended input shaft only by special order. ** ) Actuators M07... M12 are equipped with handwheel type SR. Actuators M14... M16 are equipped with handwheel type R. - 11 -
N E L E S C O N T R O L S DIMENSIONS VALVE + HAND LEVER L L H H DN - DN40 DN50 - DN100 DIMENSIONS VALVE + HAND LEVER LK DN TYPE HAND LEVER DIMENSIONS H L WEIGHT [KG] LK180 198 140 140 6 40 LK220 245 170 170 9 50 M1M LK350 295 222 350 20 80 LK350 342 244 350 35 100 LK450 435 309 450 60 80 LK350 336 244 350 35 M1K 100 LK450 427 309 450 50-12 -
F L A N G E D F U L L B O R E M B V B A L L V A L V E, S E R I E S M 1 F O R P N R A T I N G S HOW TO ORDER MBV MODULAR BALL VALVE, Series M1 Q- M1 M A 80 A K /F 06 1. 2. 3. 4. 5. 6. 7. 8. 9. 1. sign Low noise construction Q- Attenuator in flow port of ball 2. sign Valve series, face-to-face length M1 3. sign K L M Full bore, seat supported, f-to-f lenght acc. to ISO 5752 Pressure rating of body and flanges (wall thickness according to ISO 7121) DIN PN10 DIN PN16 DIN PN DIN PN40 4. sign Construction A T Standard construction Standard construction with TA-luft tested live loaded packing approved by TÜV 5. sign Size, 40, 50, 80, 100, 150,, 0, 300 7. sign Seat type K S E C Scraping, Locked Scraping, Unlocked Scraping, Low p Scraping, Locked Seat material SS+ Cobalt based hard facing SS+ Cobalt based hard facing SS+ Cobalt based hard facing CK- 3MCuN + Cobalt based hard facing M SOFT Filled T SOFT Thrust bearing material + Graphite + Graphite + Graphite + Graphite + Graphite + Graphite Back seal material / FKM or + polyester 8. sign Packing Body gasket Standard, without V-rings sign / F Graphite Graphite 6. sign Body material Trim (& Coating) material Materials Stem material Bolting material 9. sign End connection style Standard, without sign Standard raised face (Ra 10...12.5) A CF8M C CG8M U CK- 3MCuN CF8M (& Hard Chrome, if metal seat) CG8M ( & Hard Chrome, if metal seat) CK-3MCuN (& ceramic coating, if metal seat) XM-19 XM-19 UNS S314 A2 A2 A2 / A4 01 Smooth finish Ra 3.2...6.3 03 DIN 26 Form D (Raised face Ra 10) 04 DIN 26 Form E (Raised face Ra 4) 06 DIN 12 Form F (tongue) 07 DIN 12 Form N (groove) 10 DIN 13 Form V13 (male) 11 DIN 13 Form R13 (female) - 13 -
N E L E S C O N T R O L S INTERNATIONAL MANUFACTURING AND SALES LOCATIONS Subject to change without prior notice. UNITED STATES: Shrewsbury, Massachusetts. MEXICO: Chihuahua. BRAZIL: São osé dos Campos. FINLAND: Helsinki. FRANCE: Wittenheim. PEOPLE S REPUBLIC of CHINA: Shanghai. Our products are available through Neles Controls sales offices in Australia, Austria, Belgium, Canada, Chile, Denmark, England, Germany, Indonesia, Italy, apan, The Netherlands, Norway, Portugal, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Spain, Sweden, Switzerland, Thailand, United Arab Emirates, Venezuela, as well as through a world-wide network of representatives. Neles Controls Oy P.O. Box 110, 00881 Helsinki, Finland Tel. int. +358 204 80 150 Fax int. +358 204 80 151 Neles Controls Inc. P.O. Box 8004, Shrewsbury, MA 01545, USA Tel. int. +1 508 852 3567 Fax int. +1 508 852 8762 Neles Controls PTE. LTD 501 Orchard Road, #05-09 Wheelock Place, 238880 Singapore Tel. int. +65 735 5 Fax int. +65 735 2955 NELES CONTROLS GROUP A MEMBER OF RAUMA CORPORATION www.nelescontrols.com