Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical <0mΩ initial @ -4VDC, 00mA Dielectric Strength 500Vrms min Insulation Resistance >00MΩ min Operating Temperature -40ºC to 85ºC Storage Temperature -40ºC to 85ºC Materials Actuator Housing Cover Bushing Bracket Contacts Terminals Brass, Chrome Plated Diallyl Phthalate (DAP) Stainless Steel Brass, Nickel Plated Brass, Tin Plated Copper Alloy, Silver or Gold Plated Copper Alloy, Silver Plated Features Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability Up to four poles with seven fuctions available Anti-rotation feature on fl at toggles High torque bushing preventing separation from frame during installation Wide variety of terminal options page
Ordering Information. Series ANT 3 T E B Q E ANT. Number of Poles = SPDT = DPDT 3 = 3PDT 4 = 4PDT 3. Switch Function = ON-NONE-ON = ON-NONE-(ON) 3 = ON-OFF-ON 4 = (ON)-OFF-(ON) 5 = ON-OFF-(ON) 6 = ON-ON-ON **See 3-way wiring section for details 4. Actuator T = mm, standard S = 0.4mm, standard X = 3.97mm, standard V = 6.6mm, standard W =.34mm, standard Y = mm, fl at toggle *only available with AR, AR, AN, AN bushing F =.30mm, fl at toggle *only available with AR, AR, AN, AN bushing G =.00mm, fl at toggle *only available with AR, AR, AN, AN bushing K = 3.50mm, fl at toggle *only available with AR, AR, AN, AN bushing Z =.37mm, large toggle *only available with BZ, BZR bushing Z = 7.45mm, large toggle *only available with BZ, BZR bushing LK = 4.73mm, locking toggle, round top *only available with K, K bushing LK = 4.73mm, locking toggle, fl at top *only available with K, K bushing P(color) =.34mm, plastic *see color choices in Actuator Option section PX = 6.30mm, plastic, fl at toggle *only available with BZ, BZR bushing 5. Bushing E / E = 8.89mm, ¼-40NS / non-threaded, keyway F / F = 7.0mm, ¼-40NS / non-threaded, keyway J = 8.89mm, ¼-40NS, flat W = 8.89mm, M6P-0.75 (metric) keyway H = 8.00mm, high torque, ¼-40NS, keyway G = 7.5mm, high tourque, ¼-40NS, flat AR / AR = 7.55mm, anti-rotation, ¼-40NS / non-threaded, keyway AN / AN = 7.55mm, anti-rotation, ¼-40NS / non-threaded, flat BZ =.38mm, 5/3-3NS, keyway BZR =.38mm, 5/3-3NS, keyway with support insert L = 7.55mm, ¼-40NS, keyway, splash proof K / K = 8.00mm, ¼-40NS, non-threaded, keyway ** See actuator option section for bushing availability with various actuators 6. Terminals B = Solder Lug ** Wire wrap terminals available in various lengths, contact factory C = PC Pin D = Quick Connect H = Horizontal Mount, right angle PC pin, HS = Snap-In V = Vertical Mount, right angle PC pin, VS = Snap-In S0 or S5 = PC pin with support bracket, V0 or V5 = Snap-In support bracket S35 or S40 = PC pin with support bracket, V35 or V40 = Snap-In support bracket 7. Contacts Q = Silver plated R = Gold plated G = Gold over Silver plated 8. Epoxy Seal E = Epoxy Seal 9. Actuator Cover Blank = No cover S = for S, T, X, V & W actuators E = for E, F, J, & G bushings Z = for BZ & BZR bushings Actuator Cover Colors = White = Black 3 = Red ** Color choices only available with S toggle cover page
Switch Function Toggle Position Function 8.89 [.35] 6.86 [.7] SPDT ON NONE ON ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) POS. 3 POS. POS. EPOXY SEAL 3 Terminals -3 - - 3 Toggle Position Function ON NONE ON 0.4 [.4].43 [.45] DPDT 5 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) Terminals -3 - - 6 ON ON ON POS. 3 POS. POS. EPOXY SEAL 3 6 5 4 3 4 6 Terminals -3 5-6 -3 5-4 - 5-4 Toggle Position 3PDT 5 3 4 6 7 8 9 Function ON NONE ON ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) Terminals -3 5-6 8-9 - - 5-4 8-7 POS. 3 POS. POS..06 EPOXY SEAL 3 6.5 [.65] 9 8 7 Toggle Position Function 4PDT 5 8 ON NONE ON ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) Terminals -3 5-6 8-9 - - - 5-4 8-7 --0 6 ON ON ON POS. 3 POS. POS..06 EPOXY SEAL 0.59 [.85] 8 9 5 6 7 4 TYP. 3 3 4 6 7 9 0 Terminals -3 5-6 8-9 - -3 5-4 8-9 -0-5-4 8-7 -0 page 3
Actuator Options Actuator lengths shown with E bushing, subtract.78mm for F/F bushing, subtract 0.5mm for M bushing.9 [.] 0.67 [.4].9 [.] 3.30 6.6 [.64] 3.30.34 [.84] 3.30 3.97 [.55] S T V W X Below Actuators only available with AR, AR & AN/AN bushing.54 [.0].43 [.45].54 [.0].33 [.84] 6.48 [.6].9 4.98 3.49 [.53] 4.9 [.6].54 [.0] F G K Y Below Actuators only available with BZ & BZR bushing.9.9 Below Actuators only available with K & K Bushing. LK & LK are not available with momentary functions..04.04 5.44 [.] 5.44 [.].07 [.48] 7.5 [.68] 7.88 [.70] UNLOCKED 6.0 [.63] LOCKED 8.59 [.73] UNLOCKED 6.8 [.66] LOCKED 5/3-3 UNS-A.38 [.45] 5/3-3 UNS-A.38 [.45] 6.60 [.6] 6.60 [.6] 0.5 0.5.40.40 Z Z LK LK page 4
Bushing Options.0.0 ANT.0 Ø8.04 0.7 8.89 [.35] 0.7 7.0 [.8] 5.7 [.3] 8.89 [.35] 5.7 [.3] 7.5 0.7 0.5 6.98 [.7].0 E - Threaded E - Non-Treaded F - Threaded F - Non-Threaded J - Threaded G - Threaded High Torque H - Threaded High Torque 5.7 [.3] 0.5 Ø.8 [.46] O-RING GROOVE 7.47 [.9] 5.65 [.] 6.5 [.4] 7.55.0 0.7 6.5 [.4] 7.55.0 0.70 M6 x 0.75 Ø8.00 8.00.5.45.45.00 L - Threaded Splash Proof AN - Threaded Anti-Rotation AR - Threaded Anti-Rotation W - Threaded Metric Panel Mounting page 5
Terminal Options 3.94 [.6].4 [.0] 0.76 TYP..9.03 TYP. 0.76 4.80 TYP. B C 4.80 0.76.57 TYP. 0.76 TYP. D W 6.86 [.7] HS 0.76 3 (5X) Ø.85 H (HS - Snap-in) = Horizontal mount, right angle PC pins, single pole 3.8.43 [.45] HS 4 TYP. 4 5 6 3.8 TYP. 0.76 TYP. (8X) Ø.85 H (HS - Snap-in) = Horizontal mount, right angle PC pins, double pole page 6
Terminal Options ANT 6.86 [.7] 3.8 HS 3 0.76 TYP. 3.8 TYP. (5X) Ø.85 7.6 V (VS - Snap-in) = Vertical mount, right angle PC pins, single pole.43 [.45] 3.8 HS 3 3 6 0.76 TYP. 3.8 TYP. (8X) Ø.85 7.6 V (VS - Snap-in) = Vertical mount, right angle PC pins, double pole 6.5 [.65] 4.35 [.56] 7.6 9.66 [.38] HS 4.35 [.56] 3 TYP. 3 9 0.76 TYP. 3.8 TYP. (X) Ø.85 3.8 V (VS - Snap-in) = Vertical mount, right angle PC pins, three pole.59 [.85] 4.35 [.56] 7.6 4.49 [.57] HS 4.35 [.56] 3 3 6 9 0.76 TYP. TYP. 3.8 TYP. TYP. (4X) Ø.85 3.8 V (VS - Snap-in) = Vertical mount, right angle PC pins, four pole page 7
Terminal Options SNAP-IN BRACKET (V0 / V5) 8.3 Terminal Option "A" Dimension S0 / V0.68 S5 /V5 6.00 (7X) Ø.85 S0/S5 (V0/V5 - Snap-in) = PC pins with support bracket, single pole BRACKET (V0 / V5) 8.3 Terminal Option "A" Dimension S0 / V0.68 S5 / V5 6.00 (0X) Ø.85 S0/S5 (V0/V5 - Snap-in) = PC pins with support bracket, double pole 8.3 BRACKET (V0 / V5) Terminal Option "A" Dimension S5 / V5 6.00 (3X) Ø.85 9.66 [.38] S0/S5 (V0/V5 - Snap-in) = PC pins with support bracket, three pole page 8
Terminal Options ANT BRACKET (V0 / V5) 8.3 Terminal Options "A" Dimension S5 / V5 6.00 (6X ) Ø.85 4.49 [.57] S0/S5 (V0/V5 - Snap-in) = PC pins with support bracket, four pole Snap - in Bracket (V35 / V40) Terminal Option "A" Dimension S35 / V35.68 S40 / V40 6.00 9.4 [.36] (7X) Ø.85 S35 (V35 - Snap-in) = PC pins with support bracket, single pole Snap - in Bracket (V35 / V40) Terminal Option "A" Dimension S35 / V35.68 S40 / V40 6.00 9.4 [.36] (0X) Ø.85 S35 (V35 - Snap-in) = PC pins with support bracket, double pole page 9
Terminal Options Snap - in Bracket (V35 / V40) Terminal Option "A" Dimension S40 / V40 6.00 9.4 [.36] (3X) Ø.85 S40 (V40 - Snap-in) = PC pins with support bracket, three pole Snap - in Bracket (V35 / V40) Terminal Option "A" Dimension S40 / V40 6.00 9.4 [.36] (6X) Ø.85 4.49 [.57] S40 (V40 - Snap-in) = PC pins with support bracket, four pole Contact Options Designator Contact Material Terminal Material Electrical Ratings Q Silver Plating Silver Plating 5A @ 0VAC, 8VDC; A @ 50VAC R Gold over Nickel Plating Gold over Nickel Plating 0.4VA max @ 0VAC or VDC max G Gold over Silver Plating Gold over Silver Plateing 0.4VA max @ 0VAC or VDC max or 5A @ 0VAC, 8VDC; A @ 50VAC page 0
Cap Options ANT 9.35 [.76] Ø4.0 [.7] Ø.00 6.00 [.63] 8.30 [.7] 7.00 [.67] Ø7.50 Ø8.5.3 [.09] 4.40 [.57] O-ring Groove 0.90 [.43] 3.50 [.4] 4.50 [.96].49 5/3-3 UNS - B Sealing Flange 4.90 [.59].5 [.0] 5.60 [.] 4.75 [.97] 3.6 [.4] 5/3-3 UNS - B Rubber Gasket Seat 7.5 [.68] 3.88 Sealed Boot E Knurled Nut Sealed Boot Z3 Rubber Coated Sealed Boot Z4 Plain Hex Nut Hardware 5/3-3 Hardware 4.00 [.55] 6.3 [.64] Ø.50 Ø5.76 [.49] Ø.05 Ø8.34 [.7].60 3.05 Ø4.8 [.56] Ø0.00 [.39] Ø6.00 [.63] Ø8.5 4. [.56] 5/3-3 UNS-B.97 0.70.36 [.09] 3.56 [.4] Ø3.55 [.53] 4.33 [.7] Ø.95 [.5].85 [.] 3.4 0.75 3.83 Hex Nut Lock Washer Locking Ring-Keyway Knurled Nut Dress Nut page
Hardware /4-40 Hardware 8.00 9. [.36] Ø0.80 [.43] Ø Ø.90 Ø.0 Ø.90 0.85.0 Ø.90 0.85.58 0.70 5.80 [.3].8 Ø 0.70.8 Ø 0.66 Hex Nut Lock Washer Locking Ring-Flat Locking Ring-Keyway Washer-Keyway 8.80 [.35] 3. Ø7.5 [.9] Ø4.90 Ø9.50.57 8.80 [.35] 3. Ø7.95 Ø4.90 Ø9.50.8 [.09] 8.80 [.35] Ø7.80 THRU Ø9.50.8 [.44] Ø8.30 [.33] THRU Ø.70 [.46] R5.00 [.59] Ø7.5 [.9] THRU Ø9.50.4.3 3. 0.80.30 [.09] 7.53 Dress Nut A Dress Nut B Dress Nut C Dress Nut D Dress Nut E Collars Ø8.30 [.7] Ø3.50 [.53] Ø.47 [.49] Ø5.50 [.6] 8.4 6.40 Ø [.4] 8.4 6.40 Ø8.08 8.30 [.33] Ø0.3 [.40] 6.00 [.4] A B C Knurled Nut Ø8.00 Ø8.00.50 4.50 [.8] Toggle Cap S R.90.70 [.46] Ø5.00 Ø.40 [.09] Ø4.0 [.6] page