IN-LINE FANS COMMERCIAL VENTILATION

www.vortice.com IN-LINE FNS OMMERIL VENTILTION

HEDQURTERS VORTIE IN THE WORLD Founded in 1974, Vortice France is located at rétail about 1 Km from Paris. Our current Vortice Headquarters have been located in Tribiano (Milan) since 1972. Vortice main company s philosopy is the concept that air is our life. Our mission is always to provide effective solutions for improved air quality using the latest technology to develop and manufacture effective products worldwide. Vortice has achieved European market leadership by dedicating their efforts to the production of products for ventilation, climate control, heating, extraction, purification and the treatment of air, for domestic, commercial and industrial applications. Since 1954 Vortice has been synonymous with quality and excellence and continues to make significant improvements by investing in continuous research to improve the efficiency and quality of its products. Founded in 1977, Vortice Limited is located at Burton on Trent in the East Midlands. 21 - Our Moscow representative office was established. Founded in 2, Vortice Ventilation System is located about 2 Km from Shanghai. Founded in 2, Vortice Latam in San Josè ostarica. 2

INDEX VORTIE 6 VORTIE LINEO V RNGE In-line mixed flow fans 4 WE D E RNGE entrifugal duct fans for external wall 18 LINEO ES RNGE Energy Saving mixed flow extractor fans 44 MD E W RNGE entrifugal duct fans for wall mounting V E RNGE In-line centrifugal fans in self-extinguishing plastic 28 MD ND MD E RNGE In-line centrifugal fans in metal 34 ES RNGE Energy Saving in-line centrifugal fans in metal 48 MD E RF RNGE entrifugal duct fans for roof mounting 52 ESSORIES IN-LINE Included, product accessories, speed controllers, evironmental sensor 54 SYSTEM OMPONENTS E MRKING ommercial Ventilation appliances conform to the following European Directives: ccording to the following state-of-the-art Standards: SFETY: EN ISO 1-1 EN ISO 1-2 EN ISO 199 EM: EN 5514-1 EN 5514-2 3

LEGEND SILENT RUNNING ND ERTIFIED, GURNTEED PERFORMNE IMQ PERFORMNE is an independent quality mark which certifies, according to international standards, performances of the product. EO-FRIENDLY Guarantees the low environmental impact. Recyclable materials have been used and the design for disassembly technique has been SFE Safety, power rating, enclosure protection rating the Italian national certifying agency. The IMQ mark certifies that the product is manufactured in compliance with the provisions of relevant established safety standards and directives: guarantees regular, constant monitoring of production quality. TM ENERGY SVING ES label means that the appliance is fitted with E Brushless motor and provides high energy savings, thanks to a wide range of speed regulation options and very low consumption levels. LONG LIFE 3. H The Long Life 3, h label certifies that the appliance is guaranteed to continuously run at max operating temperature for 3. hours without mechanical failure thanks to its motor, equipped with ball bearings. ERP OMPLINT The ErP compliant logo indicates that the appliance is ecocompatible and adheres DJUSTBLE TIMER The timer comes on when the light is switched on. When the light is turned off, the unit continues to operate for 3 to 2 minutes, depending on the timer setting. SELF-EXTINGUISHING V PLSTI fire resistance with high mechanical strength. 4

VORTIE OMMERIL VENTILTION VORTIE LINEO VORTIE LINEO Vortice Lineo series in-line mixed flow fans are ideal for duct-mounted ventilation system requiring a good pressure, high air flow and low noise levels OMMERIL VENTILTION KEY FETURES Protection rating IP44 djustable timer from 3 to 2 minutes Ermetic seal Overload protection ompact overall dimensions Double insulation Lever closure Self-extinguishing V plastic Two speeds ball bearing motors LONG LIFE 3. h Vortice Lineo fans can be mounted in a wide range of options: at the beginning, middle or end of the air duct and horizontally, vertically, against walls, ceilings, false ceilings or any flat surface. Vortice Lineo range is easy to install and to be removed for inspection and maintenance. Vortice Lineo fans can be fitted to standard round section pipes and The integrated IP44 rated electrical junction box has an airtight cover. The product is supplied complete with a bag of accessories including anchor bolts and plugs, cable clamps and grommets. OMPT OVERLL DIMENSIONS The products have a very small overall size, making them ideal for installation in cramped areas. Slim yet powerful, the overall diameter is only slightly larger than the ventilation duct it connects to. OVERLOD PROTETION Vortice Lineo models from 1 to 2 are provided with thermal cut-out devices. Lineo models from 25 to 315 are equipped with thermal cut-out, manually resettable. OMPLINE TO STNDRDS the E Mark for compliance with the Low Voltage Directive ENVIRONMENTL SENSORS Vortice Lineo fans are capable of advanced functionality in combination with optional sensor units for monitoring humidity, detecting persons, ambient temperature, pollutant levels and air quality. 5

VORTIE OMMERIL VENTILTION NEW VORTIE LINEO V RNGE In-line mixed flow fans PRODUT SPEIFITIONS Suitable for residential, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, models, restaurants, bars, theatres, ballrooms, etc. LONG LIFE 3. h 18 models: from 1 to 315 diameter. Enclosure and impellers made of self-extinguishing V mineral charged polypropylene. Ball bearing motors; motors 3. hours operation without mechanical malfunction. Two speeds. Speed adjustable through optional speed controllers. ontrollable through Vortice environmental sensors and DUO two-speed controller. Protection rating: IP44. Insulation class: ll. TEHNIL DT valable only for the Extra EU market*** Max irflow Max Pressure Models ode W RPM m 3 h l/s mmh 2 O Pa Lp db()* min max min max min max min max min max min max min max min max VORTIE LINEO 1 Q V 175 VORTIE LINEO 1 Q T V 1725 15.5.7 5 155 2 43.1 7.5 29.4 37.9 VORTIE LINEO 1 V 171 VORTIE LINEO 1 T V 1721 2 23.9.11 152 23 255 5 13 7.5 3.7 39.4 VORTIE LINEO 5 V 172 VORTIE LINEO 5 T V 1722 25 33.11.15 157 214 25 11.4 13 17 7.5 33.9 43 VORTIE LINEO 15 V 173 VORTIE LINEO 15 T V 1723 4 21 55 21 27 41.4 5.5 VORTIE LINEO 16 V 174 VORTIE LINEO 16 T V 17 4 21 55 21 27 41.7 VORTIE LINEO 2 Q V 177 VORTIE LINEO 2 Q T V 1728 45 75.22.37 274 7 95 194.4 13 29 7.5 49 VORTIE LINEO 25 Q V 1727 VORTIE LINEO 25 Q T V 1729 11.4.5 255 72 99 2 275 34 53 333.5 519.9 49.1 VORTIE LINEO 2 V 176 VORTIE LINEO 2 T V 1726 145.43 214 79 219.4 294.4 29 33 323.7 52.5 VORTIE LINEO 25 V 179 11 19 255 99 135 275 375 53 353.5 519.9 51.4 59.1 VORTIE LINEO 315 V 171 2 3.9 1.32 5 174 23 43.5 75 * Sound pressure level measured at 3 m in free field conditions with long-cased appliance in delivery mode, in accordance with standard EN ISO 3741:29. Electric supply: 22- V ~ 5 Hz. Max

VORTIE LINEO V RNGE OMMERIL VENTILTION DIMENSIONS Models B Ø D E F G L Kg L B G E D F VORTIE LINEO 1 Q V VORTIE LINEO 1 Q T V 174 231 152 95 47.5 1.25 VORTIE LINEO 1 V VORTIE LINEO 1 T V 211 33 11.5 9 VORTIE LINEO 5 V VORTIE LINEO 5 T V 211 2 11.5 9 VORTIE LINEO 15 V VORTIE LINEO 15 T V 214.5 234 294 1.5 2 11 2.4 VORTIE LINEO 16 V VORTIE LINEO 16 T V 214.5 234 272.5 1.5 2 11 2.4 VORTIE LINEO 2 Q V VORTIE LINEO 2 Q T V 234.5 3 5.5 235 14 1 4.3 VORTIE LINEO 25 Q V VORTIE LINEO 25 Q T V 3 317 7 152.5 292 145 VORTIE LINEO 315 V 394.5 3 359 22.5 11.3 INSTLLTION Vortice Lineo extractors can be mounted in a wide range of options - at the beginning, in the middle or at end of air duct and horizontally, vertically, against walls, ceilings, false ceilings on any flat surface. One of the main features is easy inspection and maintenance, in just a few seconds. Vortice Lineo units can be fitted to standard round section pipes and to rectangular air ducts S SINGLE UNIT T INLET IN SERIES (DOUBLES PRESSURE) S SINGLE UNIT THROUGH DUT IN PRLLEL (DOUBLES IR FLOW) S SINGLE UNIT T DUT OUTLET IN SERIES + PRLLEL FOR RETNGULR DUTS (DOUBLES PRESSURE THE IR FLOW) 7

VORTIE OMMERIL VENTILTION VORTIE LINEO V RNGE In-line mixed flow fans SOUND PRESSURE LEVELS Models Sound Level measured at 3 m in free air condition with product completely ducted. ode min Sound pressure level [db()] *EN ISO 3741:1999 VORTIE LINEO 1 Q V 175 VORTIE LINEO 1 Q T V 1725 25 29 VORTIE LINEO 1 V 171 25 3 VORTIE LINEO 1 T V 1721 VORTIE LINEO 5 V 172 27 33 VORTIE LINEO 5 T V 1722 VORTIE LINEO 15 V 173 33 VORTIE LINEO 15 T V 1723 VORTIE LINEO 16 V 174 34 VORTIE LINEO 16 T V 17 VORTIE LINEO 2 Q V 177 3 VORTIE LINEO 2 Q T V 1728 3 VORTIE LINEO 2 V 176 52.5 VORTIE LINEO 2 T V 1726 VORTIE LINEO 25 Q V 1727 4 VORTIE LINEO 25 Q T V 1729 4 VORTIE LINEO 25 V 179 51.4 59.1 VORTIE LINEO 315 V 171 max SOUND PRESSURE LEVELS Models ode 5 Hz 25 Hz 5 Hz 1K Hz 2K Hz 4K Hz 8K Hz Lw db() VORTIE LINEO 1 Q V 175 VORTIE LINEO 1 Q T V 1725 55.5 47.4 44.3 VORTIE LINEO 1 V 171 52.3 53.5 51. 34. VORTIE LINEO 1 T V 1721 VORTIE LINEO 5 V 172 51.4 59.5 4.5 VORTIE LINEO 5 T V 1722 VORTIE LINEO 15 V 173 71.1 VORTIE LINEO 15 T V 1723 VORTIE LINEO 16 V 174 59.1 71.3 VORTIE LINEO 16 T V 17 VORTIE LINEO 2 Q V 177 55.2 47.3 VORTIE LINEO 2 Q T V 1728 VORTIE LINEO 2 V 176 71.2 7.7 57.4 75.7 VORTIE LINEO 2 T V 1726 VORTIE LINEO 25 Q V 1727 75.1 71.5 74. 52.5 VORTIE LINEO 25 Q T V 1729 VORTIE LINEO 25 V 179 73.1 77.2 72.3 55.1 79.7 VORTIE LINEO 315 V 171 73.3 79.

VORTIE LINEO V RNGE OMMERIL VENTILTION ESSORIES FOR SERIES ND PRLLEL INSTLLTION Models Description ode Product VORTIE LINEO 1 Q V code 175 VORTIE LINEO 1 Q T V code 1725 VORTIE LINEO 1 V code 171 VORTIE LINEO 1 T V co de 1721 VORTIE LINEO 5 V code 172 VORTIE LINEO 5 T V code 1722 VORTIE LINEO 15 V code 173 VORTIE LINEO 15 T V code 1723 VORTIE LINEO 16 V code 174 VORTIE LINEO 16 T V code 17 VORTIE LINEO 2 Q V code 177 VORTIE LINEO 2 Q T V VORTIE LINEO 2 V VORTIE LINEO 2 T V VORTIE LINEO 25 Q V code 1727 VORTIE LINEO 25 Q T V code 1729 VORTIE LINEO 25 V code 179 VORTIE LINEO 315 V code 171 LINEO- 1 Installation kit tube 22584 LINEO- 5 Installation kit tube 22585 LINEO- 15 Installation kit tube 22586 LINEO- 16 Installation kit tube 22587 LINEO- 2 Installation kit tube 22588 LINEO- 25 Installation kit tube 22589 LINEO-SF 5 Series installation plate 22593 LINEO-SF 7 Series installation plate 22594 LINEO-PF 1 Parallel installation kit 22577 LINEO-PF 5 Parallel installation kit 22578 LINEO-PF 15 Parallel installation kit 22579 LINEO-PF 16 Parallel installation kit 22581 LINEO-PF 2 Parallel installation kit 22582 LINEO-PF 25 Parallel installation kit 22583 9

VORTIE OMMERIL VENTILTION VORTIE LINEO V RNGE In-line mixed flow fans PRODUT ESSORIES Models Description ode Product VORTIE LINEO 1 Q V code 175 VORTIE LINEO 1 Q T V code 1725 VORTIE LINEO 1 V code 171 VORTIE LINEO 1 T V code 1721 VORTIE LINEO 5 V code 172 VORTIE LINEO 5 T V code 1722 VORTIE LINEO 15 V code 173 VORTIE LINEO 15 T V code 1723 VORTIE LINEO 16 V code 174 VORTIE LINEO 16 T V code 17 VORTIE LINEO 2 Q V code 177 VORTIE LINEO 2 Q T V code VORTIE LINEO 2 V code VORTIE LINEO 2 T V code VORTIE LINEO 25 Q V code 1727 VORTIE LINEO 25 Q T V code 1729 VORTIE LINEO 25 V code 179 VORTIE LINEO 315 V code 171 HS Environmental sensor for humidity 994 PIR Passive infrared sensor 998 SMOKE Environmental sensor for air quality TEMP Environmental sensor for temperature 993 992 TIMER djustable over-run timer 999 DUO Speed controller 22914 5.5 Speed controller.5 987 1.5 Electronic speed controller 1.5 966 2.5 Electronic speed controller 2.5 967 KIT SB Built-in controller adaptors for 1.5 and 2.5 281 KIT SB5 Built-in controller adaptors for 5.5 283 LINEO-G 1 Lineo grille nominal diameter 1 LINEO-G 5 Lineo grille nominal diameter 5 LINEO-G 15 Lineo grille nominal diameter 15 LINEO-G 16 LINEO-G 2 Lineo grille nominal diameter 2 LINEO-G 25 Lineo grille nominal diameter 25 2271 2272 2273 2274 2275 2276 Description and size on page 52; System components on page 54 1

VORTIE LINEO V RNGE OMMERIL VENTILTION PERFORMNE URVES LINEO 1 Q V code 175 - LINEO 1 Q T V code 1725 LINEO 1 V ODE 171 - LINEO 1 T V ODE 1721 8 83 19 182 7 66 15 146 5 3 5 33 11 7 19 73 2 17 4 36 46 92 138 184 23 57 114 171 228 285 13 26 38 51 64 16 32 48 63 79 LINEO 5 V ODE 172 - LINEO 5 T V ODE 1722 LINEO 15 V ODE 173 - LINEO 15 T V ODE 1723 19 187 3 295 15 15 236 11 8 1 75 18 177 118 4 37 6 59 83 166 9 332 415 1 8 372 496 62 23 46 69 92 115 34 69 13 138 172 LINEO 16 V ODE 174 - LINEO 16 T V ODE 17 LINEO 2 Q V ODE 177 - LINEO 2 Q T V ODE 1728 3 295 41 4 236 33 32 18 177 118 16 p [Pa] 16 6 59 8 8 1 8 372 496 62 22 44 66 88 1.1 34 69 13 138 172 61 2 183 4 36 q [l/s] 11

VORTIE OMMERIL VENTILTION VORTIE LINEO V RNGE In-line mixed flow fans PERFORMNE URVES LINEO 2 V ODE 176 - LINEO 2 V T ODE 1726 LINEO 25 Q V ODE 1727 - LINEO 25 Q T V ODE 1729 37 364 61 6 3 291 49 48 22 15 218 146 37 p [Pa] 36 7 73 252 54 756 1.8 1.26 22 44 66 88 1.1 7 14 21 28 35 61 2 183 4 36 q [l/s] LINEO 25 V ODE 179 LINEO 315 ODE 171 59 58 84 826 47 464 67 661 35 348 232 51 34 496 33 116 17 165 31 62 93 1. 1.55 52 1.4 1.56 2.8 2.6 86 172 258 344 431 144 289 433 578 722 min. max.

VORTIE LINEO V RNGE OMMERIL VENTILTION IN SERIES PERFORMNE URVES LINEO 1 V LINEO 5 V 34 33 3 29 27 264 232 2 13 198 132 18 174 116 7 66 6 58 57 114 171 228 285 83 166 9 332 415 16 32 48 63 79 23 46 69 92 115 LINEO 15 V LINEO 16 V 49 485 49 485 4 388 4 388 3 2 291 194 3 2 291 194 1 97 1 97 1 8 372 496 62 1 8 372 496 62 34 69 13 138 172 34 69 13 138 172 LINEO 2 Q V LINEO 2 V 61 6 6 59 49 48 48 472 37 p [Pa] 36 36 354 236 118 2 4 6 8 1. 252 54 756 1.8 1.26 56 111 167 222 278 q [l/s] 7 14 21 28 35 13

VORTIE OMMERIL VENTILTION VORTIE LINEO V RNGE In-line mixed flow fans IN SERIES PERFORMNE URVES LINEO 25 Q V LINEO 25 V 1 1.1 1 985 9 88 8 788 67 45 p [Pa] 66 44 6 4 591 394 22 22 2 197 2 4 6 8 1. 31 62 93 1. 1.55 56 111 167 222 278 q [l/s] 86 172 258 344 431 LINEO 315 V 148 1.45 118 1.16 89 59 87 58 3 29 52 1.4 1.56 2.8 2.6 144 289 433 578 722 14

VORTIE LINEO V RNGE OMMERIL VENTILTION IN PRLLEL PERFORMNE URVES LINEO 1 V LINEO 5 V 18 18 19 187 15 144 15 15 11 7 18 72 11 8 1 75 4 36 4 37 94 188 282 376 47 138 276 414 552 69 26 52 78 14 131 38 77 115 153 192 LINEO 15 V LINEO 16 V 3 295 3 295 236 236 18 177 118 18 177 118 6 59 6 59 25 5 75 1. 1.25 25 5 75 1. 1.25 69 139 28 278 347 69 139 28 278 347 LINEO 2 Q V LINEO 2 V 41 4 37 363 33 32 3 29 16 p [Pa] 16 22 15 218 145 8 8 7 73 4 8 1.2 1.6 2. 111 222 333 444 556 q [l/s] 15 46 92 1.38 1.84 2.3 8 256 383 511 639 15

VORTIE OMMERIL VENTILTION VORTIE LINEO V RNGE In-line mixed flow fans IN SERIES PERFORMNE URVES LINEO 25 Q V LINEO 25 V 51 5 56 545 41 4 44 436 31 2 p [Pa] 3 2 33 22 327 218 1 1 11 19 4 8 1.2 1.6 2. 572 1.144 1.716 2.288 2.86 111 222 333 444 556 q [l/s] 159 318 477 636 794 IN SERIES + PRLLEL PERFORMNE URVES LINEO 1 V LINEO 5 V 31 3 31 3 18 p [Pa] 18 18 p [Pa] 18 6 6 6 6 36 48 6 16 32 48 64 8 33 67 1 133 167 44 89 133 178 222 q [l/s] q [l/s]

VORTIE LINEO V RNGE OMMERIL VENTILTION IN SERIES + PRLLEL PERFORMNE URVES LINEO 15 V LINEO 16 V 51 5 51 5 41 4 41 4 31 2 p [Pa] 3 2 31 2 p [Pa] 3 2 1 1 1 1 4 8 1.2 1.6 2. 4 8 1.2 1.6 2. 111 222 333 444 556 q [l/s] 111 222 333 444 556 q [l/s] LINEO 2 Q V LINEO 2 V 61 6 51 5 49 48 41 4 37 p [Pa] 36 31 2 p [Pa] 3 2 1 1 4 8 1.2 1.6 2. 6 1.2 1.8 2.4 3. 111 222 333 444 556 q [l/s] 167 333 5 667 833 q [l/s] LINEO 25 Q V LINEO 25 V 92 9 92 9 73 72 73 72 55 37 p [Pa] 54 36 55 37 p [Pa] 54 36 18 18 18 18 4 8 1.2 1.6 2. 6 1.2 1.8 2.4 3. 111 222 333 444 556 q [l/s] 167 333 5 667 833 q [l/s] 17

TM VORTIE OMMERIL VENTILTION LINEO ES RNGE Energy Saving mixed flow extractor fans PRODUT SPEIFITIONS Suitable for residential, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, models, restaurants, bars, theatres, ballrooms, etc. LONG LIFE 3. h 8 models: from 1 to 315 diameter. Enclosure and impellers made of self-extinguishing V mineral charged polypropylene. E brushless motors. Ball bearing motors for at least 3. hours operation without mechanical malfunction. Two speeds. ontrollable through Vortice environmental sensors and DUO two-speed controller. Insulation class: ll. TEHNIL DT Models ode LINEO 1 Q ES 1736 LINEO 1 ES 1731 LINEO 5 ES 1732 LINEO 15 ES 1733 LINEO 16 ES 1734 LINEO 2 ES 1737 LINEO 25 ES 1738 Max irflow Max Pressure W RPM m 3 h l/s mmh 2 O Pa Lp db()* min max min max min max min max min max min max min max min max 4.5 7 1 5.5 11 1 13.5 1 15 22 1 15 22 22 53 27 45 7 17 1.5 17 22 35 52 23 55 34 57 74 59 95 1.5.7.1.9.11.7.1.13.1.15.2.1.15.2.21.33.47.42.59..9..17.11.17.22.2.31.44.21.33.45.32.5.54 142 25 132 192 134 13 199 275 172 21 2 33 2 233 237 223 19 229 233 3 275 31 LINEO 315 ES 1739 119 235 14 19 53 4 7 392 54.1 9 155 17 14 22 19 25 3 325 325 75 92 145 21 23 255 27 27 44 55 45 57 1 115 5 * Sound pressure level measured at 3 m in free field conditions with long-cased appliance in delivery mode, in accordance with standard EN ISO 3741:29. The values in the table refer to three conditions: minimun setting, nominal and maximum setting. 25 43 47 39 5 53 9 17 9 9 17 9 172 2 222 255 4 51 71 75 75 11 15 2 153 172 5 175 211 3 319 347 9 11 7 17 9 15 2 15 22 31 15 22 31 13 19 25 19 29 37 15 23 29 33 43 53 43 53 19 27 37 34 51 35 147 147 34 147 34 7 5 147 177 225 255 157 3 275 422 52 275 422 52 333 5 21. 33.5 25.3 31.4 35.7 39.3 35. 39.2 45.7 39.4 45.3 43. 47.4 5.4 33.3 4. 44.5 31.4 35.1 4.3 44.4 44.1 47.1 53.2 47.7 54.1 44.3 47.5 5.9 55. 57.3 Max 5 Electric supply: 23 V ~ 5 Hz.

LINEO ES RNGE OMMERIL VENTILTION ErP data Models ode Measurement cat. Efficiency cat. Year of construction Variable drive N. (kw) Pe BEP* m 3 /h q Pa p RPM Spec. ratio <1.4 LINEO 315 ES 1739 STTI 1-1-213 YES 54.4 235 YES * Best efficiency point. DIMENSIONS Models B Ø D E F G H I Kg L B LINEO 1 Q ES 25 231 152 95 51.5 47.5 1.5 Models Description ode Product LINEO 1 Q ES LINEO 1 ES code 1731 LINEO 5 ES code 1732 LINEO 15 ES code 1733 LINEO 16 ES code 1734 LINEO 2 ES code 1737 LINEO 25 ES LINEO 315 ES code 1739 E F LINEO 1 ES 33 11.5 9 1.9 LINEO 5 ES 2 11.5 9 G LINEO 15 ES 214.5 294 1.5 2 11 2.2 LINEO 16 ES 214.5 272.5 1.5 2 11 2.1 LINEO 2 ES 234.5 29 3 5.5 235 14 94 1 2.5 LINEO 25 ES 3 35 7 152.5 292 14 145 5.3 D LINEO 315 ES 3 359 22.5 9.5 PRODUT ESSORIES HS Environmental sensor for humidity 994 PIR Passive infrared sensor SMOKE Environmental sensor for air quality 993 TEMP Environmental sensor for temperature 992 TIMER djustable over-run timer 999 DUO Speed controller 22914 Description and size on page 52; System components on page 54 19

VORTIE OMMERIL VENTILTION LINEO ES RNGE Energy Saving mixed flow extractor fans PERFORMNE URVES LINEO 1 Q ES ODE 1736 - MIN SPEED LINEO 1 Q ES ODE 1736 - MX SPEED 2 2 2 2 16 16 16 16 8 p [Pa] 8 8 p [Pa] 8 4 4 4 4 4 8 16 2 6 18 3 11 22 33 44 56 q [l/s] 17 33 5 67 83 q [l/s] LINEO 1 ES ODE 1731 - MIN SPEED LINEO 1 ES ODE 1731 - MX SPEED 2 2 31 3 16 16 8 p [Pa] 8 18 p [Pa] 18 4 4 6 6 6 18 3 6 18 3 17 33 5 67 83 q [l/s] 17 33 5 67 83 q [l/s] LINEO 5 ES ODE 1732 - MIN SPEED LINEO 5 ES ODE 1732 - MX SPEED 31 3 41 4 33 32 18 p [Pa] 18 16 p [Pa] 16 6 6 8 8 8 16 32 4 1 2 3 4 5 22 44 67 89 111 q [l/s] 28 56 83 111 139 q [l/s] 2

LINEO ES RNGE OMMERIL VENTILTION PERFORMNE URVES LINEO 15 ES ODE 1733 - MIN SPEED LINEO 15 ES ODE 1733 - MX SPEED 41 4 61 6 33 32 49 48 16 p [Pa] 16 37 p [Pa] 36 8 8 36 48 6 14 28 42 56 7 33 67 1 133 167 q [l/s] 39 78 117 156 194 q [l/s] LINEO 16 ES ODE 1734 - MIN SPEED LINEO 16 ES ODE 1734 - MX SPEED 41 4 61 6 33 32 49 48 16 p [Pa] 16 37 p [Pa] 36 8 8 36 48 6 14 28 42 56 7 33 67 1 133 167 q [l/s] 39 78 117 156 194 q [l/s] LINEO 2 ES ODE 1737 - MIN SPEED LINEO 2 ES ODE 1737 - MX SPEED 31 3 41 4 33 32 18 p [Pa] 18 16 p [Pa] 16 6 6 8 8 2 4 6 8 1. 4 8 1.2 1.6 2. 56 111 167 222 278 q [l/s] 111 222 333 444 556 q [l/s] 21

VORTIE OMMERIL VENTILTION LINEO ES RNGE Energy Saving mixed flow extractor fans PERFORMNE URVES LINEO 25 ES ODE 1738 - MIN SPEED LINEO 25 ES ODE 1738 - MX SPEED 41 4 82 8 33 32 65 64 16 p [Pa] 16 49 33 p [Pa] 48 32 8 8 16 16 22 44 66 88 1.1 4 8 1.2 1.6 2. 61 2 183 4 36 111 222 333 444 556 q [l/s] q [l/s] LINEO 315 ES ODE 1739 78 766 63 47 31 16 613 46 37 153 min speed max speed min. setting nominal setting max. setting min. setting nominal setting max. setting 44 88 1.32 1.76 2.2 2 4 367 489 611 p = static pressure 22

LINEO ES RNGE NOTE OMMERIL VENTILTION 23

VORTIE OMMERIL VENTILTION NEW V E RNGE In-line centrifugal fans in self-extinguishing plastic PRODUT SPEIFITIONS Suitable for residential, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, restaurants, bars, theatres, ballrooms, etc. LONG LIFE 3. h 7 models: 1 V D, 5 V D, 15 V D, 2 V Q, 2 V E, 25 V E, 315 V E. Structure in self-extinguishing V PP thermoplastic resin. Backward curved centrifugal impellers. High efficient ball bearing motors. Low noise emissions. Low specific consumption. Wide range of continuous operation temperatures between -25 and +55. Mounting brackets made of galvanized steel included. Protection rating: IP44 V E. Protection rating: IPX4 V. Insulation class: II. TEHNIL DT Models ode W RPM m 3 /h Max irflow l/s mmh 2 O Max Pressure Pa Lp db() 1 V D 15-235 3-4 274-392 5 V D.34 -.4 5-353 15 V D.34 -.41 14-239 2-34 Max 5 2 V Q 1.35 229 7 194.4 37 2 V E 9.4 233 45 441 25 V E 9.4 92 42 4 55 315 V E.54 11 35 55 539 * Sound pressure level measured at 3 m in free field conditions with long-cased appliance in delivery mode in accordance with standard EN ISO 3741:29. ** Sound pressure level measured at 3 m in free field conditions with long-cased appliance in delivery mode Electrical supply: 23 V ~ 5 Hz for V E models.

V E RNGE OMMERIL VENTILTION DIMENSIONS F D Models B Ø Ø D E F Kg B D 1 V D 97 2.4 25 25 25 5 V D 2 2.3 3 15 V D 3 35 3 3 2 V Q 3.1 197 2 V E 34 34 4 4. 25 V E 35 7 4.3 315 V E 4 34 4 3 75 4 Galvanised sheet-metal brackets (for model Ø 1-5-15) Galvanised sheet-metal brackets (for model Ø 2-25-315) F F D B D B E E Models B D E F Brackets 4 4 2 1 Models B D E F Brackets 5 1 4 215 1 SOUND LEVELS Models ode 63 5 25 5 1 2 4 8 1 V D 168 54.4 53.1 max speed 5 V D 1618 47.2 52.3 15 V D 1628 51.7 25

VORTIE OMMERIL VENTILTION V E RNGE In-line centrifugal fans in self-extinguishing plastic PRODUT ESSORIES Models Description ode Product 1 V D 5 V D 15 V D 2 V Q 2 V E 25 V E 315 V E 1.5 Electronic speed controller 966 2.5 Electronic speed controller 967 SNRB Non-reversible built-in electronic speed controller 971 SB Built-in controller adaptor for 1.5 and 2.5 281 966-967 DUO Speed controller 22914 HS Environmental sensor for humidity 994 TEMP Environmental sensor for temperature 992 SMOKE Environmental sensor for air quality 993 PIR Passive infrared sensor 998 TIMER djustable over-run timer 999 -G 1 Protection grille nominal diameter 1 mm 2275 -G 5 Protection grille nominal diameter 5 mm 22755 -G 15 Protection grille nominal diameter 15 mm 2276 -G 2 Protection grille nominal diameter 2 mm 22765 -G 25 Protection grille nominal diameter 25 mm 2277 -G 315 Protection grille nominal diameter 315 mm 22775 -MU Galvanized sheet-metal brackets 22674 Description and size on page 52; System components on page 54 PERFORMNE URVES 1 V D ODE 168 5 V D ODE 1618 45 442 4 393 36 354 32 314 27 18 265 177 16 236 157 9 88 8 79 53 16 159 2 265 8 16 32 4 15 29 44 59 74 22 44 67 89 111

V E RNGE OMMERIL VENTILTION PERFORMNE URVES 15 V D ODE 1628 2 V Q ODE 1635 38 374 42 415 3 299 34 332 23 15 2 149 25 17 9 166 8 75 8 83 1 2 336 448 56 156 3 468 6 78 31 62 93 1 156 43 87 13 173 217 2 V E ODE 1638 25 V E ODE 1639 5 491 47 462 4 393 38 37 3 2 295 196 28 19 277 185 1 98 9 92 188 376 564 752 94 26 4 618 8 1.3 52 14 157 29 261 57 114 172 229 286 315 V E ODE 1641 61 599 49 48 37 36 min. max. 26 52 78 1.4 1.3 72 144 217 289 361 27

VORTIE OMMERIL VENTILTION NEW MD ND MD E RNGE In-line centrifugal fans in metal PRODUT SPEIFITIONS Suitable for residential, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, restaurants, bars, theatres, ballrooms, etc. LONG LIFE 3. h TEHNIL DT 13 models: from 1 diameter to 315. Stripped and phosphated steel structure, painted with polyester powder which is particularly resistant to the aggressive action of atmospheric agents. Two speeds. Backward curved centrifugal impellers. High efficient ball bearing motors. Low noise emissions. Low specific consumption. Direction flaps optimised to reduce turbulence inside the appliance. Wide range of continuous operation temperatures between -25 and +5. Mounting brackets made of galvanized steel included. Protection rating: IP44. Insulation class: II. valable only for the Extra EU market*** Models ode W RPM m 3 /h Max irflow l/s mmh 2 O Max Pressure Pa Lp db()* 1 MD 1615.3 -.4 173-5 22-34 3-39 5 MD 16151.3 -.4 27-37 15 Q MD 16152.3 -.4 143-235 3-5 21-35 15 MD 16153 11-155.5 -.7 57-77 44-54 432-53 16 MD 16154 11-155.55 -.7 41-5 42-491 4.7-47.4 2 MD 16155 11-155.55 -.7 17-21 25 MD 16156 115-2.55 -.9 95-13 4-549 315 MD 16157 194-25 375-5 52-72 52.4-57.7 Max 5 15 MD E 16163 34-55 94-153 4-45 392-441 16 MD E 16164 37-57 37-45 2 MD E 16165 45-9.37 -.4 139-231 4-451 25 MD E 16166.51 -.53 42-53 4-52 315 MD E 16167.51 -.53 172-3 5 * Sound pressure level measured at 3 m in free field conditions with long-cased appliance in delivery mode in accordance with standard EN ISO 3741:29. Electrical supply: 23 V ~ 5 Hz.

MD ND MD E RNGE OMMERIL VENTILTION DIMENSIONS Models Ø B Ø D E F Kg B E F 1 MD 97 15 15 2.97 5 MD 255 239 3 2 23 23 3. 15 Q MD 147 3 3 15 MD 147 17 17 5.52 16 MD 157 5.47 347 275 392 2 MD 197 2 17 5.43 25 MD 7 35 315 MD 455 3 3 9.47 D 15 MD E 147 17 17 16 MD E 157 347 275 392 2 MD E 197 2 17 25 MD E 7 35 315 MD E 294 455 3 21 3 11. Galvanised sheet-metal brackets (for model Ø 1-5-15) Galvanised sheet-metal brackets (for model Ø 2-25-315) F F D B D B E E Models B D E F brackets 4 4 2 1 Models B D E F brackets 5 1 4 215 1 SOUND LEVELS Frequency bands in octaves and sound output. The measurements of the sound power have been carried out according to international standards EN ISO-3741. Models ode 5 25 5 1 2 4 8 1 MD 1615 5 MD 16151 15 Q MD 16152 15 MD 16153 16 MD 16154 2 MD 16155 25 MD 16156 315 MD 16157 minimum speed 49.4 42 51.7 49.3 maximum speed 53.3 54.1 minimum speed 45 51.7 51 45.9 42.1 35.1 n.a. maximum speed 55.4 55.2 minimum speed 45.2 53.7 39.7 maximum speed 55.9 minimum speed 59.7 53.3 5 maximum speed 71.1 59.2 51.9 minimum speed 53 53 41.5 32.2 maximum speed 7.4 5.4 43.1 minimum speed 55.4 54.2 45.7 maximum speed 7.3 54.5 47.4 minimum speed 51.5 44.7 maximum speed 71.2 77.9 minimum speed 74 57.7 maximum speed 74.3 72.4 7.3 29

VORTIE OMMERIL VENTILTION MD ND MD E RNGE In-line centrifugal fans in metal PRODUT ESSORIES Models Description ode Product 1 MD 5 MD 15 Q MD 15 MD 16 MD 2 MD 25 MD 315 MD 15 MD E 16 MD E 2 MD E 25 MD E 315 MD E 1.5 Electronic speed controller 1.5 966 2.5 Electronic speed controller 2.5 967 SNRB Electronic speed controller built-in 971 SB Built-in controller adaptor for 1.5 and 2.5 281 HS Environmental sensor for humidity 994 TEMP Environmental sensor for temperature 992 SMOKE Environmental sensor for air quality 993 PIR Passive infrared sensor 998 TIMER djustable over-run timer 999 DUO Speed controller 22914 -G 1 Protection grille nominal diameter 1 mm 2275 -G 5 Protection grille nominal diameter 5 mm 22755 -G 15 Protection grille nominal diameter 15 mm 2276 -G 16 22762 -G 2 Protection grille nominal diameter 2 mm 22765 -G 25 Protection grille nominal diameter 25 mm 2277 -G 315 Protection grille nominal diameter 315 mm 22775 -MU Galvanized sheet-metal brackets 22674 Description and size on page 52; System components on page 54 3

MD ND MD E RNGE OMMERIL VENTILTION PERFORMNE URVES 1 MD ODE 1615 5 MD ODE 16151 44 432 41 43 35 346 33 322 26 18 259 173 25 16 2 161 9 86 8 81 76 152 228 34 38 1 2 3 4 5 21 42 63 84 16 28 56 83 111 139 15 Q MD ODE 16152 15 MD ODE 16153 39 383 6 59 31 36 48 472 23 16 23 153 36 354 236 8 77 118 1 2 336 448 56 31 62 93 1 156 172 344 516 688 86 48 96 143 191 239 16 MD ODE 16154 2 MD ODE 16155 56 55 54 531 45 44 43 425 34 22 33 22 32 22 319 2 11 11 11 16 188 376 564 752 94 25 5 75 1. 1.25 52 14 157 29 261 69 139 28 278 347 31

VORTIE OMMERIL VENTILTION MD ND MD E RNGE In-line centrifugal fans in metal PERFORMNE URVES 25 MD ODE 16156 315 MD ODE 16157 63 619 8 786 5 495 64 629 38 25 371 8 48 32 472 314 13 1 16 157 3 6 9 1.2 1.5 4 8 1.2 1.6 2. 83 167 25 333 417 111 222 333 444 556 15 MD E ODE 16163 16 MD E ODE 16164 5 491 5 491 4 393 4 393 3 2 295 197 3 2 295 197 1 98 1 98 1 8 372 496 62 8 256 384 5 64 34 69 13 138 172 36 71 17 142 178 32

MD ND MD E RNGE OMMERIL VENTILTION PERFORMNE URVES 2 MD E ODE 16165 25 MD E ODE 16166 51 51 59 58 41 41 47 464 31 2 31 2 35 348 232 1 1 116 186 372 558 744 93 48 72 96 1.2 52 13 155 27 258 67 133 2 267 333 315 MD E ODE 16167 65 639 52 511 39 26 383 256 13 8 256 5 768 1. 1.28 71 142 213 284 356 min. max. 33

TM VORTIE OMMERIL VENTILTION NEW ES RNGE Energy Saving in-line centrifugal fans in metal PRODUT SPEIFITIONS Suitable for residential, commercial and industrial applications: kitchens, bathrooms, offices, laboratories, factories, shops, laundromats, restaurants, bars, theatres, ballrooms, etc. 8 models Stripped and phosphated steel structure, painted with polyester powder which is particularly resistant to the aggressive action of atmospheric agents. Two speeds, one speed for models 25 ES and 315 ES. Backward curved centrifugal impellers. High efficient ball bearing E motors. Low noise emissions. Low specific consumption. Wide range of continuous operation temperatures between -25 and +5. Mounting brackets made of galvanized steel included. Protection rating: IP44. Insulation class: II. TEHNIL DT Models ode W 1 ES 1617 5 ES 16171 15 Q ES 16172 15 ES 16173 16 ES 16174 2 ES 16175 11 19 35 11 19 35 11 19 35 2 44 2 44 2 44 29 55 29 55 29 55 3 15 3 15 3 15..2..2.35..2.35.21.43.55.21.43.55.21.43.55.29.53.75.29.53.75.29.53.75.3.93 1.5.3.93 1.5.3.93 1.5 RPM 131 214 152 193 117 1515 1925 3 3 1 22 253 231 23 259 142 217 141 223 214 2 m 3 /h 17 22 22 37 31 41 42 55 47 7 77 Max irflow 27 34 35 44 5 49 75 54 15 1 l/s 47 13 114 117 153 175 13 175 194 214 4 75 94 15 97 2 139 15 155 133 15 233 7 292 311 mmh 2 O 27 43 14 23 11 3 17 29 17 29 15 31 37 49 51 34 47 49 42 45 22 51 22 51 2 47 5 Pa 157 422 137 225 373 294 353 353 147 255 34 5 333 255 4 441 5 549 5 549 49 Lp db()* 25 ES 16176 14 1.2 35 115 319 73 57.3 315 ES 16177 1.27 1935 5 51 5 5.7 Max Pressure.9 35.4 25.3 33.2 4.3 27.5 34.7 41.5 3.3 41.4 34.3 39.2 41.7 32.1 43.4 45.9 49.7 4. 34.3 47.3 35.1 47.1 Max 5 Electrical supply: 23 V ~ 5 Hz. 34

ES RNGE OMMERIL VENTILTION DIMENSIONS Models Ø B Ø D E F Kg B D E F 1 ES 97 15 15 2.7 5 ES 255 239 33 2 23 23 15 Q ES 147 3 3 15 ES 147 17 17 4.5 16 ES 275 422 157 347 2 ES 197 2 17 25 ES 392 7 3 35 4.9 315 ES 455 315 35 3 Galvanised sheet-metal brackets (for model Ø 1-5-15) Galvanised sheet-metal brackets (for model Ø 2-25-315) F F D B D B E E Models B D E F Brackets 4 4 2 1 Models B D E F Brackets 5 1 4 215 1 35

VORTIE OMMERIL VENTILTION ES RNGE Energy Saving in-line centrifugal fans in metal PRODUT ESSORIES Models Description ode Product 1 ES 5 ES 15 ES 15 Q ES 16 ES 2 ES 25 ES 315 ES HS Environmental sensor for humidity 994 TEMP Environmental sensor for temperature 992 SMOKE Environmental sensor for air quality 993 PIR Passive infrared sensor 998 TIMER djustable over-run timer 999 -G 1 Protection grille nominal diameter 1 mm 2275 -G 5 Protection grille nominal diameter 5 mm 22755 -G 15 Protection grille nominal diameter 15 mm 2276 -G 16 22762 -G 2 Protection grille nominal diameter 2 mm 22765 -G 25 Protection grille nominal diameter 25 mm 2277 -G 315 Protection grille nominal diameter 315 mm 22775 -MU Galvanized sheet-metal brackets 22674 Description and size on page 52; System components on page 54

ES RNGE OMMERIL VENTILTION PERFORMNE URVES 1 ES ODE 1617 - MIN SPEED 1 ES ODE 1617 - MX SPEED 4857 472 56 57 56 3846 377 448 46 448 2934 1923 28336 189 2 34 23 336 2 111 94 1 11 1 6486 8 172 19258 256 344 32 43 86 172 258 344 43 18 3648 5372 7196 89119 q [l/s ] 48 72 96 119 5 ES ODE 16171 - MIN SPEED 5 ES ODE 16171 - MX SPEED 43 43 423 423 55 541 34 34 338 338 44 432 26 26 17 17 254 254 169 169 33 22 3 216 9 9 85 85 11 18 84 84 168 168 252 252 336 336 42 42 1 2 336 448 56 23 23 47 47 7 7 93 93 117 117 q [l/s ] 31 62 93 1 156 15 Q ES ODE 16172 - MIN SPEED 15 Q ES ODE 16172 - MX SPEED 34 34 334 334 34 5 334 491 27 27 267 267 27 4 267 393 2 2 14 14 21 21 134 134 2 3 21 295 14 2 134 197 7 7 67 67 1 7 67 98 92 92 184 184 276 276 368 368 46 46 6 92 184 252 276 378 368 54 46 63 26 26 51 51 77 77 8 8 q [l/s ] 26 35 51 7 15 77 14 8 175 37

VORTIE OMMERIL VENTILTION ES RNGE Energy Saving in-line centrifugal fans in metal PERFORMNE URVES 15 ES ODE 16173 - MIN SPEED 15 ES ODE 16173 - MX SPEED 4 393 63 619 32 314 51 495 16 236 157 38 25 372 8 8 79 13 1 14 28 42 56 7 18 36 54 72 9 39 78 117 156 194 5 1 15 2 25 16 ES ODE 16174 - MIN SPEED 16 ES ODE 16174 - MX SPEED 4 393 63 619 32 314 51 495 16 236 157 38 25 372 8 8 79 13 1 156 3 468 6 78 198 396 594 792 99 43 87 13 173 217 55 11 165 22 275 2 ES ODE 16175 - MIN SPEED 2 ES ODE 16175 - MX SPEED 35 344 56 55 28 275 45 44 21 14 26 138 34 22 33 22 7 69 11 11 196 392 588 784 98 264 528 792 1.56 1.32 54 19 163 218 272 73 147 22 293 367

ES RNGE OMMERIL VENTILTION PERFORMNE URVES 25 ES ODE 16176 315 ES ODE 16177 81 796 57 56 65 637 46 448 49 32 478 318 34 23 336 2 16 159 11 1 27 54 81 1.8 1.35 4 8 1.2 1.6 2. 75 15 225 3 375 111 222 333 444 556 min speed min. setting max speed min. setting p = static pressure nominal setting nominal setting max. setting max. setting 39

VORTIE OMMERIL VENTILTION NEW WE D E RNGE entrifugal duct fans for external wall PRODUT SPEIFITIONS Designed for silent extraction from kitchens, bathrooms, utility rooms, cellars, garages, public spaces such as bars and shops, and workplaces such as workshops and laboratories. LONG LIFE 6 models: P4 sheet steel structure painted with polyester paint which is resistant to atmospheric agents. Induction motor with external rotor, manual reset thermal protection device. Two speeds. 3. h Backward curved centrifugal impellers. High efficient ball bearing motors. Motor support flange in mineral charged PP. Low noise emissions. Low specific consumption. PV made gravity shutters. Backdraught shutters. utomatic delivery outlet and protective grille closure avoids the risk of air re-entry and prevents foreign bodies from entering. Wide range of continuous operation temperatures Protection rating IPX5. Insulation class: I. TEHNIL DT Models ode W RPM m 3 /h Max irflow l/s mmh 2 O Max Pressure Pa Lp db() 1 WE D 1691 2-33 29-37 5 WE D 1692 14-2325 3-39 15 Q WE D 1693 22-4 5-353 15 WE D E 1687 45-1.39 -.44 3-252 33-43 3-422 55 16 WE D E 1688 45-1.39 -.44 3-252 353-441 55 2 WE D E 1689 45-1.39 -.44 131-253 33-44 3-431 55 Max * Sound pressure level measured at 3 m in free field conditions with long-cased appliance in delivery mode in accordance with standard EN ISO 3741:29. Electrical supply: 23 V ~ 5 Hz for WE D E models. 4

WE D E RNGE OMMERIL VENTILTION DIMENSIONS WE D Models B D Ø E F G Kg 1 WE D F 5 WE D 345 7 113 97 - E 15 Q WE D 15 WE D E 147 2 16 WE D E 43 173 155 157 B 2 WE D E 197 D WE D E F G E B D SOUND LEVELS Models ode 5 25 5 1 2 4 8 1 WE D 1691 59.5 5 WE D 1692 59.7 15 Q WE D 1693 59.4 51.1 41

VORTIE OMMERIL VENTILTION WE D E RNGE entrifugal duct fans for external wall PRODUT ESSORIES Models Description ode Product 1 WE D 5 WE D 15 Q WE D 15 WE D E 16 WE D E 2 WE D E 1.5 Electronic speed controller 966 2.5 Electronic speed controller 967 SB Built-in controller adaptor for 1.5 and 2.5 281 HS Environmental sensor for humidity 994 TEMP Environmental sensor for temperature 992 SMOKE Environmental sensor for air quality 993 PIR Passive infrared sensor 998 TIMER djustable over-run timer 999 DUO Speed controller 22914 Description and size on page 52; System components on page 54 42

WE D E RNGE OMMERIL VENTILTION PERFORMNE URVES 1 WE D ODE 1691 5 WE D ODE 1692 41 43 44 432 33 322 35 346 25 16 2 161 26 18 259 173 8 81 9 86 74 149 223 297 372 86 172 258 344 43 21 41 62 83 13 48 72 96 119 15 Q WE D ODE 1693 15 WE D E ODE 1687 4 393 48 472 32 314 38 377 16 236 157 29 19 283 189 8 79 1 94 9 18 27 36 45 138 276 414 552 69 25 5 75 1 5 38 77 115 153 192 16 WE D E ODE 1688 2 WE D E ODE 1689 5 491 49 482 4 393 39 385 3 2 295 197 29 2 289 193 1 98 1 96 148 296 444 592 74 152 34 456 68 76 41 82 3 164 26 42 84 7 169 211 min. max. 43

VORTIE OMMERIL VENTILTION NEW MD E W RNGE entrifugal duct fans for wall mounting PRODUT SPEIFITIONS Suitable for indoor wall-mounted applications at the end of ventilation ducts in residential and industrial environments as factories, hospitals, gyms, restaurants, etc... LONG LIFE 3. h TEHNIL DT 8 models: 2 MD E W, 25 MD E W, 315 MD E W. Stripped and phosphated steel structure, bands and bases, painted with polyester powder which is resistant to atmospheric agents. nduction motor manual reset thermal protection device for diameters 1, 5 and 15 Q. Low noise emissions. Low specific consumption. Motor supports with built-in airflow direction flaps in resin plastic material with high structural strength. Wiring box in plastic material with high structural strength. entrifugal impellers wih reverse blades in charged PP for diameters 1, 5 and 15 Q, Wide range of continuous operation temperatures between -25 and +55. Protection rating: IP44. Insulation class: II. Models ode W RPM m 3 /h Max irflow l/s mmh 2 O Max Pressure Pa Lp db()* 1 MD E W 16 152-25 - 47 19.2-35.7 5 5 MD E W 161 13-235 3-49 225-353 25.5-39.4 5 15 Q MD E W 162 35-51 2-32 5 15 MD E W 16133 133-175 37-43 41.4-53.3 55 16 MD E W 16134 35-43 343-422 43. - 53. 55 2 MD E W 16135 45-9.37 -.4 159-259 39-45 55 25 MD E W 16136.51 -.55 595-1 4-54 392-53 55 315 MD E W 16137.51 -.55 41.2-51.4 55 Max * Sound pressure level measured at 3 m in free field conditions with long-cased appliance in delivery mode Electrical supply: 23 V ~ 5 Hz. 44

MD E W RNGE OMMERIL VENTILTION DIMENSIONS G D B F H E L Models B Ø D E F Ø G H L Kg 1 MD E W 97 15 3.3 5 MD E W 334 334 21 2 34 34 23 3.3 15 Q MD E W 147 3 3.3 15 MD E W 147 5 5 17 5.5 16 MD E W 5 157 5.5 4 4 394 394 2 MD E W 197 2 5.5 25 MD E W 237 7 315 MD E W 3 459 459 5 5 11 PRODUT ESSORIES Models Description ode Product 1 MD E W 5 MD E W 15 Q MD E W 15 MD E W 16 MD E W 2 MD E W 25 MD E W 315 MD E W 1.5 Electronic speed controller 1.5 966 2.5 Electronic speed controller 2.5 967 SB Built-in controller adaptor for 1.5 and 2.5 281 HS Environmental sensor for humidity 994 TEMP Environmental sensor for temperature 992 SMOKE Environmental sensor for air quality 993 PIR Passive infrared sensor 998 TIMER djustable over-run timer 999 DUO Speed controller 22914 -G 1 Intake protection grille nominal diameter 1 mm 2275 -G 5 Intake protection grille nominal diameter 5 mm 22755 -G 15 Intake protection grille nominal diameter 15 mm 2276 -G 16 22762 -G 2 Intake protection grille nominal diameter 2 mm 22765 -G 25 Intake protection grille nominal diameter 25 mm 2277 -G 315 Intake protection grille nominal diameter 315 mm 22775 Description and size on page 52; System components on page 54 45

VORTIE OMMERIL VENTILTION MD E W RNGE entrifugal duct fans for wall mounting PERFORMNE URVES 1 MD E W ODE 16 5 MD E W ODE 161 41 43 4 393 33 322 32 314 25 16 2 161 16 236 157 8 81 8 79 16 2 318 4 53 11 22 33 44 55 29 59 88 118 147 31 61 92 2 153 15 Q MD E W ODE 162 15 MD E W ODE 16133 36 354 48 472 29 283 38 377 22 14 2 142 29 19 283 189 7 71 1 94 114 228 342 456 57 14 28 42 56 7 32 63 95 7 158 39 78 117 156 194 16 MD E W ODE 16134 2 MD E W ODE 16135 48 472 5 491 38 377 4 393 29 19 283 189 3 2 295 197 1 94 1 98 154 38 462 616 77 194 388 582 776 97 43 86 8 171 214 54 18 162 216 269

MD E W RNGE OMMERIL VENTILTION PERFORMNE URVES 25 MD E W ODE 16136 315 MD E W ODE 16137 6 59 63 619 48 472 51 495 36 354 236 38 25 372 8 118 13 1 48 72 96 1.2 25 5 75 1. 1.25 67 133 2 267 333 69 139 28 278 347 min. max. 47

VORTIE OMMERIL VENTILTION NEW MD E RF RNGE entrifugal duct fans for roof mounting PRODUT SPEIFITIONS Suitable for outdoor installation on roof at the end of ventilation ducts in residential and industrial environmen ts asfactories, hospitals, gyms, restaurants, etc... LONG LIFE 3. h TEHNIL DT 8 models: 2 MD E RF, 25 MD E RF, 315 MD E RF. Stripped and phosphated steel structure, bands and bases, painted with polyester powder which is resistant to atmospheric agents. Induction motor with built-in rotor, manual reset thermal protection device for diameters 1, 5 and 15 Q. Low noise emissions. Low specific consumption. Motor supports with built-in airflow direction flaps in resin plastic material with high structural strength. Wiring box in plastic material with high structural strength. nti-uv thermoplastic resin cover in grey. Wide range of continuous operation temperatures between -25 and +55. Protection rating: IP45 for model 1, 5 and 15 Q MD E RF. Insulation class: II. Models ode W min/m RPM m 3 /h Max irflow l/s Max Pressure mmh 2 O Pa Lp db()* 1 MD E RF 1614 159-3 32-41 314-42 27.3-37.5 5 5 MD E RF 16141 1345-255 - 373 21.1-4.2 5 15 Q MD E RF 16142 149-237 25-4 21-32 5 15 MD E RF 16183.34 -.39 33-44 3-431 55 16 MD E RF 16184 31-53 34-43 333-422 55 2 MD E RF 16185 4-95 35-71 97-197 42-451 23. - 31.7 55 25 MD E RF 16186.51 -.57 5-55 49-539 55 315 MD E RF 16187.51 -.57 45-9 5-25 55 Max * Sound pressure level measured at 3 m in free field conditions with long-cased appliance in delivery mode Electric supply: 23 V ~ 5 Hz.

MD E RF RNGE OMMERIL VENTILTION DIMENSIONS N G Models B Ø D E F Ø G H L M Ø N Kg 1 MD E RF 97 15 3.5 B F 5 MD E RF 334 334 35 2 23 35 3 3.5 15 Q MD E RF 147 3 3.5 H D L M 15 MD E RF 147 17 9 2 47 16 MD E RF 4 4 157 37 37 4 5.9 E 2 MD E RF 197 2 49 25 MD E RF 7 41 7.9 435 435 534 315 MD E RF 415 3 14 PRODUT ESSORIES Models Description ode Product 1 MD E RF 5 MD E RF 15 Q MD E RF 1.5 Electronic speed controller 1.5 2.5 Electronic speed controller 2.5 15 MD E RF 16 MD E RF 2 MD E RF 25 MD E RF 315 MD E RF SB Built-in controller adaptor for 1.5 and c 2.5 HS Environmental sensor for humidity 994 TEMP Environmental sensor for temperature 992 SMOKE Environmental sensor for air quality 993 PIR Passive infrared sensor TIMER djustable over-run timer 999 DUO Speed controller 22914 RF- 5 Sub-frame 22543 RF- 22544 RF- 25-315 Sub-frame 22545 -G 1 Intake protection grille nominal diameter 1 mm 2275 -G 5 Intake protection grille nominal diameter 5 mm 22755 -G 15 Intake protection grille nominal diameter 15 mm -G 16 -G 2 Intake protection grille no minal diameter 2 mm -G 25 Intake protection grille nominal diameter 25 mm 2277 -G 315 Intake protection grille nominal diameter 315 mm 22771 Description and size on page 52; System components on page 54 49

VORTIE OMMERIL VENTILTION MD E RF RNGE entrifugal duct fans for roof mounting PERFORMNE URVES 1 MD E RF ODE 1614 5 MD E RF ODE 16141 46 452 43 423 37 362 34 338 28 18 271 181 26 17 254 169 9 9 9 85 64 8 192 256 32 86 172 258 344 43 18 36 53 71 89 48 72 96 119 15 Q MD E RF ODE 16142 15 MD E RF ODE 16183 36 354 49 482 29 283 39 385 22 14 2 142 29 2 289 193 7 71 1 96 9 18 27 36 45 18 216 3 432 54 25 5 75 1 5 3 6 9 15 16 MD E RF ODE 16184 2 MD E RF ODE 16185 48 472 51 51 38 377 41 41 29 19 283 189 31 2 31 2 1 94 1 1 118 236 354 472 59 158 316 474 632 79 33 66 98 131 164 44 88 132 176 219 5

MD E RF RNGE OMMERIL VENTILTION PERFORMNE URVES 25 MD E RF ODE 16186 315 MD E RF ODE 16187 61 599 65 639 49 48 52 511 37 36 39 26 383 256 13 8 19 38 57 76 95 2 4 6 8 1. 53 16 158 211 264 56 111 167 222 278 min. max. 51

VORTIE OMMERIL VENTILTION ESSORIES IN-LINE Galvanised sheet-metal brackets (for model V Ø 1-5-15) Galvanised sheet-metal brackets (for model MD - MD E - ES Ø 15-16-2-25-315 and V 2-25-315) Galvanised sheet-metal brackets (for model MD - ES Ø 1-5-15) F F D B 5 B F INLUDED E D D B E 7,2 R 2,5 E 1 1 18 Models B D E F brackets 4 4 2 1 Models B D E F brackets 5 1 4 215 1 Models B D E F brackets 4 32 13 1 PRODUT ESSORIES Models ode Dimensions -MU Galvanized sheet-metal brackets - For wall or ceiling mounting 22674 B Ø B 75 35 -G Protection grille - Fitted to the appliance intake to prevent accidental contact with moving parts if the appliance is installed in an accessible position (STNDRD EN 294) 2275 22755 2276 22762 22765 2277 22775 B Models ode Ø Ø B N. fiss. -G 1 2275 99 3X -G 5 22755 1 3X -G 15 2276 142 149 3X -G 16 22762 3X -G 2 22765 142 3X -G 25 2277 22 3X -G 315 22775 222 3X Models ode Ø LINEO-G Protection grille (not suitable for Lineo ES) - To be mounted directly on the product at inlet/outlet - Useful for safety and to protect the product from external bodies. - Totally manufactered from steel. black epoxy powder coated for perfect weather protection 2271 2272 2273 2274 2275 2276 LINEO-G 1 2271 11 29 LINEO-G 5 2272 7 29 LINEO-G 15 2273 151 35.5 LINEO-G 16 2274 34 LINEO-G 2 2275 21 42 LINEO-G 25 2276 255 5.5 52

ESSORIES IN-LINE OMMERIL VENTILTION SPEED ONTROLLERS Models ode Dimensions DUO Speed controller - Two speeds switch - On/off switch 22914 Models ode B DUO 22914 52 45 5.5 5 Position Speed ontroller - 5 speeds controller - Not suitable for timer, automatic, automatic timer and cord operated appliances - onvertible to flush-mounted using SB5 kit - Weight.2 Kg - Double insulation 987 Models ode 5.5 987 43 1.5-2.5 Non Reversible Variable Electronic Speed ontroller - Not suitable for products with timer or automatic shutters - onvertible to flush-mounted using SB5 kit - Weight.2 Kg - Maximum load: 2 W (for 1.5) 45 W (for 2.5) - Double insulation 966 967 Models ode 1.5 966 43 2.5 967 43 SNRB Non Reversible Variable Electronic Speed ontroller (built-in) - Not suitable for products with timer or automatic shutters - Weight.2 Kg - Maximum load: 2 W - Double insulation 971 B D B D 142 135 59.5 4.5 EVIRONMENTL SENSOR Models ode Dimensions Sensor units Sensor units are appliances which detect certain environmental conditions (humidity, temperature, human motion, odour and smoke concentration) and automatically activate the extractor fans. They may also be connected to Vortice control units, enhancing their functions. HS (code994) hecks the relative humidity of the air: the extractor fan is activated automatically when the relative humidity percentage exceeds 65%. Otherwise, the appliance starts automatically a few seconds after the light is switched on and continues to run for a set time after it has been switched off again; this time period can be adjusted to a value between 3 and 2 minutes using a built-in trimmer. TEMP (code 992) hecks the temperature of the surrounding air: the extractor fan is activated automatically when a certain temperature is recorded; this can be adjusted, using an external trimmer, to a value between 1 and 4 above the set threshold. timer keeps it running after the temperature has fallen below the set threshold, for a period of time which can be adjusted to a value between 3 and 2 minutes using a built-in trimmer. SMOKE (code 993) hecks the quality of the air when the air contains cigarette smoke, odours and other pollutants: the extractor fan is activated automatically when a concentration of odours higher than the set value is detected; this value can be adjusted using an external trimmer. pre-set timer, which can be adjusted to a value between 3 and 2 minutes using a built-in trimmer, keeps the extractor fan running for the desired period of time. PIR (code 998) hecks for human motion in the room: the extractor fan is activated automatically for a specified time period, which can be adjusted between 3 and 2 minutes using a trimmer, when human movement is detected in its range. TIMER (code 999) hecks the operating time of the appliance to which it is connected: the extractor fan is activated automatically a few seconds after the light is switched on and continues to run for a set time, which can be adjusted to a value between 3 and 2 minutes using a built-in trimmer, after it has been switched off again. 994 992 993 998 999 Techinical Data - Supply voltage 22- V - Max load 3 - Operating temperature: 5 - Protection rating IP2 B Models ode B HS 994 144 54 TEMP 992 144 54 SMOKE 993 144 54 PIR 998 144 54 TIMER 999 144 54 53

VORTIE OMMERIL VENTILTION SYSTEM OMPONENTS Models ode Dimensions N Noise attenuator - To be installed in the ventilation system, always after the fan, and/or the filter box/duct heater 2278 22781 22756 22784 22785 22786 D B D Models ode Ø Ø B D N 1 2278 211 1 1 N 5 22781 1 5 1 N 15 22756 15 1 N 2 22784 2 1 N 25 22785 25 1 N 315 22786 417 315 1 FD luminium flexible duct - Ideal for ventilation and air conditioning low noise and for high pressure. 22175 22176 22177 22179 2218 22181 Models ode Ø FD 1-4 22175 4 FD 5-4 22176 7 4 FD 15-4 22177 152 4 FD 2-1 22179 23 1 FD 25-1 2218 254 1 FD 315-1 22181 315 1 FD-I Insulated aluminium flexible duct - Ideal for ventilation and air conditioning, low heat dissipation, condensation, noise and for high pressure 22182 22183 22184 22186 22187 22188 Models ode Ø FD-I 1-4 22182 4 FD-I 5-4 22183 7 4 FD-I 15-4 22184 152 4 FD-I 2-1 22186 23 1 FD-I 25-1 22187 254 1 FD-I 315-1 22188 315 1 H Duct heater - To be installed in the ventilation system, always after the fan and/or the noise attenuator/air filter 22796 22797 22759 2279 22791 22792 22779 D D E D B Models ode B Ø D E F H 1 22796 1 325 1 4 23 H 5 22797 5 225 325 5 4 23 H 15 22759 15 25 15 4 H 2 2279 15 3 2 4 H 25 22791 15 35 25 4 H 315 22792 15 415 315 4 5 H3 315 22779 15 415 315 4 F Filter box - To be installed in the ventilation system, always before the fan, and/or the noise attenuator/duct heater - Suitable to avoid impurities entering into the ventilation system ode 22 PD - Pressure switch 22793 22794 22799 22787 22788 E B D E Models ode B Ø D E F 1 22793 21 17 5 1 227 F 5 22794 22 25 145 5 252 F 15 22799 27 235 15 F 2 22787 32 275 2 32 F 25 22788 355 32 235 25 352 ode 221 F - Flow switch ode 222 Pressure switch connection set [m 3 /h] IR FLOW/SPEED DIGRM FILTER PRESSURE LOSS DIGRM 35 2 1 2 3 4 5 6 1 F - 1 18 3 2 F - 5 16 6 3 F - 15 25 14 F - 2 4 2 5 F - 25 1 5 15 8 1 F - 1 6 2 F - 5 4 1 3 F - 15 4 3 2 5 2 4 F - 2 1 5 F - 25 25 5 1 15 2 3 1 2 3 4 5 6 7 8 9 1 [m 3 /h] [m/s] [Pa] -FU Pipe clambs - Galvanized sheet steel body and aluminium fins complete in packs of two 22667 22668 22669 22671 22672 22673 B Models ode Ø B -FU 1 22667 13 3 -FU 5 22668 3 -FU 15 22669 153 3 -FU 2 22671 23 3 -FU 25 22672 253 3 -FU 315 22673 353 3 54