GRUNDFOS DATA BOOKLET CR3-17 A-FGJ-A-E-HQQE 1x22/24 5HZ Grundfos pump 96533176 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/96533176/cr-3-17-a-fgj-a-e-hqqe.html info@lenntech.com tel. +31 152 61 9 fax. +31 152 616 289 BE > THINK > INNOVATE
Position Qty. Description 1 CR 3-17 A-FGJ-A-E-HQQE Product No.: On request Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base are in cast iron all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via combined DIN-ANSI-JIS flanges. The pump is fitted with a 1-phase, fan-cooled asynchronous motor. Further product details Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical field around the products ensures deposition of paint particles as a thin, well-controlled layer on the surface. An integral part of the process is a pretreatment. The entire process consists of these elements: 1) Alkaline-based cleaning. 2) Zinc phosphating. 3) Cathodic electro-deposition. 4) Curing to a dry film thickness 18-22 my m. The colour code for the finished product is NCS 9/RAL 95. Pump A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor stool by means of two coupling guards. The pump head, pump head cover and flange for motor mounting is made in one piece. The pump head has a combined 1/2" priming plug and vent screw. The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system. This seal type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type is suitable for high-pressure applications. The cartridge construction also protects the pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal. Primary seal: Rotating seal ring material: silicon carbide (SiC) Stationary seat material: silicon carbide (SiC) This material pairing is used where higher corrosion resistance is required. The high hardness of this material pairing offers good resistance against abrasive particles. Secondary seal material: EPDM (ethylene-propylene rubber) EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils. 1/13
The shaft seal is screwed into the pump head. The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surfaces, and the shape of the blades ensure a high efficiency. The base is made of cast iron. The flanges and base are cast in one piece. The outlet side of the base has a combined drain plug and bypass valve. The pump is secured to the foundation by four bolts through the base plate. The base is made of cast iron. The flanges and base are cast in one piece. The outlet side of the base has a combined drain plug and bypass valve. The pump is secured to the foundation by four bolts through the base plate. Motor The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. The motor is flange-mounted with tapped-hole flange (FT). Motor-mounting designation in accordance with IEC 634-7: IM B 14 (Code I) / IM 361 (Code II). Electrical tolerances comply with IEC 634. The motor has built-in thermal protection (PTO current and temperature sensors) in accordance with IEC 634-11 and requires no further motor protection. The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled conditions. As the thermal protection incorporates automatic reset, the motor must be connected in a way which ensures that the automatic reset cannot cause accidents. Technical data Controls: Frequency converter: NONE Liquid: Pumped liquid: Water Liquid temperature range: -2.. 12 C Liquid temperature during operation: 2 C Density: 998.2 kg/m³ Technical: Rated flow: Rated head: Pump orientation: Shaft seal arrangement: Code for shaft seal: Approvals on nameplate: Curve tolerance: 3 m³/h 76.5 m Vertical Single HQQE CE, EAC,ACS ISO996:212 3B 2/13
Position Qty. Description Materials: Base: Impeller: Bearing: Cast iron EN 1561 EN-GJL-2 ASTM A48-25B Stainless steel EN 1.431 AISI 34 SIC Installation: Maximum ambient temperature: 4 C Maximum operating pressure: 25 bar Max pressure at stated temp: 25 bar / 12 C 25 bar / -2 C Type of connection: DIN / ANSI / JIS Size of inlet connection: DN 25/32 1 1/4 inch Size of outlet connection: DN 25/32 1 1/4 inch Pressure rating for pipe connection: PN 25 Flange rating inlet: 25 lb Flange size for motor: FT115 Electrical data: Motor standard: IEC Motor type: 9LB Rated power - P2: 1.5 kw Power (P2) required by pump: 1.5 kw Mains frequency: 5 Hz Rated voltage: 1 x 22-23/24 V Rated current: 9.9/8.9 A Starting current: 39 % Cos phi - power factor:.98/.99 Rated speed: 275/274 rpm Motor efficiency at full load: 72-7 % Number of poles: 2 Enclosure class (IEC 34-5): 55 Dust/Jetting Insulation class (IEC 85): F Others: Minimum efficiency index, MEI :.7 Net weight: 42.2 kg Gross weight: 45.1 kg Shipping volume:.13 m³ 3/13
On request CR 3-17 A-FGJ-A-E-HQQE 5 Hz H [m] CR 3-17, 1*23 V, 5Hz eta [%] 12 11 1 1 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1.2.4.6.8 1. 1.2 1.4 1.6 1.8 2. 2.2 2.4 2.6 2.8 3. 3.2 3.4 3.6 3.8 4. 4.2 4.4 Q [m³/h] P [kw] NPSH [m] 2. 8 P1 1.5 6 1. P2 4.5 2. 4/13
89 4x24.5 x19 1 35 413.5 x 1 X G 1/2 G 1/2 135 139 178 22 141 25 18 Description Value General information: Product name: CR 3-17 A-FGJ-A-E-HQQE Product No: On request EAN number: On request Technical: Rated flow: 3 m³/h Rated head: 76.5 m Stages: 17 Impellers: 17 H [m] 12 11 1 9 8 7 CR 3-17, 1*23 V, 5Hz 9 8 7 eta [%] 1 Number of reduced-diameter impellers: Low NPSH: Pump orientation: Shaft seal arrangement: Code for shaft seal: Approvals on nameplate: Curve tolerance: Pump version: Model: Materials: Base: Impeller: N Vertical Single HQQE CE, EAC,ACS ISO996:212 3B A A Cast iron EN 1561 EN-GJL-2 ASTM A48-25B Stainless steel EN 1.431 AISI 34 A E SIC Material code: Code for rubber: Bearing: Installation: Maximum ambient temperature: 4 C Maximum operating pressure: 25 bar Max pressure at stated temp: 25 bar / 12 C 25 bar / -2 C Type of connection: DIN / ANSI / JIS Size of inlet connection: DN 25/32 1 1/4 inch Size of outlet connection: DN 25/32 1 1/4 inch Pressure rating for pipe connection: PN 25 Flange rating inlet: 25 lb Flange size for motor: FT115 Connect code: FGJ Liquid: Pumped liquid: Water Liquid temperature range: -2.. 12 C Liquid temperature during operation: 2 C Density: 998.2 kg/m³ Electrical data: Motor standard: IEC Motor type: 9LB Rated power - P2: 1.5 kw Power (P2) required by pump: 1.5 kw Mains frequency: 5 Hz Rated voltage: 1 x 22-23/24 V Rated current: 9.9/8.9 A Starting current: 39 % Cos phi - power factor:.98/.99 Rated speed: 275/274 rpm Motor efficiency at full load: 72-7 % Number of poles: 2 Enclosure class (IEC 34-5): 55 Dust/Jetting Insulation class (IEC 85): F Motor protec: PTO 6 5 4 3 2 1.5 1. 1.5 2. 2.5 3. 3.5 4. Q [m³/h] P [kw] 2. 1.5 1..5. 321 553 75 135 G 1/2 G 1/2 1 X G 1/2 139 178 4 x 19 x 24.5 2 1 35 141 89 25 18 22 1 14 4 x 13.5 P1 P2 6 5 4 3 2 1 8 6 4 2 NPSH [m] 5/13
Description Value Motor No: 8521576 Controls: Frequency converter: NONE Others: Minimum efficiency index, MEI :.7 Net weight: 42.2 kg Gross weight: 45.1 kg Shipping volume:.13 m³ 6/13
On request CR 3-17 A-FGJ-A-E-HQQE 5 Hz cos phi eta CR3-17 + 9LB 1.5 kw 1*23 V, 5 Hz I [A] cos phi.8 16 eta.6 I 12.4 8.2 4..1.2.3.4.5.6.7.8.9 1. 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2. P2 [kw] n [rpm] P1 [kw] 28 4. n 26 P1 3. 24 2. 22 1. 2. 7/13
On request CR 3-17 A-FGJ-A-E-HQQE 5 Hz 139 G 1/2 G 1/2 4 x 19 x 24.5 1 X G 1/2 1 35 141 89 25 18 22 4 x 13.5 75 553 321 2 1 14 178 135 Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. 8/13
Exploded view 251a 251d 77 28 7 7a 17 31a 219 92 31a 11 9 92 51 11b 15 1 215a 215 66a 67 49 45 18 53a 53 215a 217 531a 534 531 534a 6 9/13
Sectional drawing (TM582 for TPE2,TPE3) 5 4 3 2 1 TM582 1/13
Exploded view ( TM5726 for MGE model H/I ) 251d 251b 291 29 293 287 287a 52 277a 273b 277 252a 286 273a 273 275a 266 268 268a 289a 289 251a 288b 288 288a 252b 159e 157 158 15 156c 156 151 152 172 154 185 178 156d 187 153 188 191 156c 156b 192 159d 11/13
Parts list CR 3-17, Product No. On request Valid from 1.1.24 (41) Pos Description Annotation Données de classification Référence Quantité Unité + Motor 1 pcs - Base cpl. 1 pcs 6 Base 1 - Sealing parts 1 pcs - 25 Drain plug w/bypass valve 1 38 O-ring Diameter: 16,3 1 Material type: EPDM Thickness: 2,4 37 O-ring 2 1 O-ring Diameter: 16,3 2 Material type: EPDM Thickness: 2,4-2 Pump head cpl. 1 pcs 2 Pump head 1 7 Coupling guard 2 7a Combi Slot Torx screw 4-18 Air vent screw 1 Plug 1 Spindle 1 23a Plug 1 28 Hex head screw Length (mm): 2 4 Thread: M8 6 Formed wire spring 1-8 Coupling cpl. 1 pcs 9 Hex socket head cap screw Designation: DIN 912 4 Length (mm): 25 Thread: M8 1 Shaft pin Diameter: 5 1 Length (mm): 26 1a Coupling half 2 26 Staybolt Length (mm): 328 4 pcs Thread: M12 36a Washer Designation: DIN 125 A 4 pcs Internal diameter: 13 Outer diameter: 24 Thickness: 2,5 55 Outer sleeve 1 pcs 66a Nut Thread: M12 4 pcs - 8 Chamber stack 1 pcs - 4 Chamber cpl. 14 Guide vane 6 Plate 1 Retainer 1 Intermediate chamber 1 Vane 1 45 Neck ring 1 65 Retainer 1-4a Chamber w. bearing cpl. 2 Guide vane 6 Retainer for bearing 1 Bearing bush 1 Retainer 1 Intermediate chamber 1 Vane 1 45 Neck ring 1 65 Retainer 1-5a Chamber cpl. 1 Retainer 1 Intermediate chamber 1 12/13
Pos Description Annotation Données de classification Référence Quantité Unité Vane 1 45 Neck ring 1 65 Retainer 1 36 Lock nut Thread: M8 1 47a Bearing ring, rotating 2 49 Impeller cpl. 17-5a Guide vane cpl. 1 Guide vane 6 Plate 1 5b Top plate 1 51 Shaft, spline, cpl. 1 64a Spacing pipe 14 64a Spacing pipe Internal diameter: 12,85 2 Outer diameter: 15,85 Length (mm): 4,5 64c Clamp, splined Internal diameter: 8,5 1 Outer diameter: 15 66 Wedge lock washer 1-15 Shaft seal Material type: HQQE 1 pcs O-ring 1 O-ring 1 Seal driver, upper 1 Seal driver, lower 1 Spacer ring 1 Pipe 1 Plug 1 Plug 1 Compression spring 1 Socket set screw 1 12 O-ring Diameter: 22, 1 Material type: EPDM Thickness: 2,75 13 Seal ring, stationary 1 15 Seal ring, rotating 1 17 O-ring 1 113 Driver 1 13/13
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date. All information is copyright Grundfos. info@lenntech.com https://www.lenntech.com tel. +31 152 61 9 fax. +31 152 616 289