Accessories
CEE-ACCESSORIES Mounting Frame For attaching panel mounting socket outlets a b c d e Fig.: Type 19 30 MB 1 50 50 3 3 13 5 5 10 17 57 7 7 10 1 0 0 50 50 10 19 5 5 10 150 70 5 0 10 151 Mounting Frame For attaching panel mounting socket outlets a b c d e 70 70 0 0 17 71 0 5 70 10 15 0 0 70 70 19 7 95 77 5 1 100 110 90 90 10 15 Fig.: Type 19 30 MB 1 Intermediate Flange For attaching panel mounting socket outlets (straight) With screw terminal For Quick-Connect 1A Panel Mounting Socket Outlets With flange 75 x 75 mm Drilling spacing 0 x 0 mm 1 Fig.: Type 1 MB 5 Flush Mounting Box For panel mounting socket outlets Drilling spacing 0 x 0 mm Without terminals 13-BE Fig.: Type 13 MB Touch Protection Ring for 3A, 5p For attaching to contact carrier of panel mounting socket outlets 503 Fig.: Type 503 Touch Protection Ring for 5A, /5p For attaching to contact carrier of panel mounting socket outlets 505 Fig.: Type 505 Further information at Bals.com. Voltages and frequencies not listed here available on request.
CEE-ACCESSORIES Flush Box For panel mounting socket outlets Ref.No. 0, 105, 10, 107, 10, 1-BE 10 Fig.: Type 10 Flush-Mounting Adapter For panel mounting socket outlets listed Ref.No. 0, 105, 10, 107, 10, 1-BE 11 Fig.: Type 11 Mounting Flange For panel mounting socket outlets 15-BE Fig.: Type 15 MB Empty Enclosure Dimension of enclosure 10 x 10 mm For panel mounting socket outlets with flange 75 x 75 mm Drilling spacing 0 x 0 mm For socket with protection degree IP 10 For socket with protection degree IP7 109 Fig.: Type 10 Accessories for TK-Combi Socket Outlet Wiring harness 1A 13 Wiring harness 3A 19 G fuse base 5 x 0 mm DIN 171 1 G fuse link.3a 1 G fuse link 10A 15 G fuse link 1A 1 Further information at Bals.com. Voltages and frequencies not listed here available on request. 3
CEE-ACCESSORIES Hanging Clip For plugs and connectors with Multi-Grip cable gland for 1A 500 for 3A 501 for 3A and 5A 50 Fig.: Type 501 Cable Gland Multi-Grip with Additional Strain Relief For plugs and connectors with Multi- Grip cable gland Fig.: Type 9 for 1A/ 3p, p TE + TE-Plus, 1A/ 3p, p, 5p QC + TLS 91 for 1A/ 5p TE + TE-Plus 919 for 3A/ 3p, p, 5p TE + TE-Plus 9150 for 3A/ 3p, p, 5p TE + TE-Plus 9 for 5A/ 3p, p, 5p TE 93 Cable Gland Multi-Grip with Additional Strain Relief For plugs and connectors with Multi-Grip cable gland Closure Cap For CEE plugs Protection degree IP7 Fig.: Type 3 Fig.: Type 915 for 1A/ 3p, p TE + TE-Plus, 1A/ 3p, p, 5p QC + TLS 9951 for 1A/ 5p TE + TE-Plus 9151 for 3A/ 5p TE + TE-Plus 915 for 3A/ 3p, p, 5p TE + TE-Plus 9153 for 5A/ 3p, p, 5p TE 915 1A/ 3p 30 1A/ p 35 1A/ 5p, 7p 31 3A/ 3p, p 37 3A/ 5p, 7p 3 3A/ 3p, p, 5p 33 5A/ 3p, p, 5p 3 Reducer Suitable for cables less than Ømm For all 1A standard plugs and sockets with Multi-Grip as well as extra-low voltage 99 Fig.: Type 99 DIN screw For additional locking device Retrofittable Can only be used in operating windows with...-gwe. 503 Fig.: Type 503 Further information at Bals.com. Voltages and frequencies not listed here available on request.
HINGED WINDOW With touch protection 30 MB 9 Fig.: Type 5009 Module units Dimension a Dimension b 0,5 7,5 1,5 17,5 0,0,5...-GWE. 51 590 599 5009 501 507 Without touch protection 30 MB 95 Fig.: Type 5010 Module units Dimension a Dimension b 37,0 73,0 109,0 1,5 17,0 0,0...-GWE. 5 591 5001 5010 5019 50 With touch protection and mounting bracket 30 MB 97 Fig.: Type 5110 Module units Dimension a Dimension b 0,5 7,5 1,5 17,5 0,0,5...-GWE. 55 59 500 50 50 5031 With touch protection 30 MB 9 Fig.: Type 5110 Module units Dimension a Dimension b 0,5 7,5 1,5 17,5 0,0,5...-GWE. 50 53 5590 5110 5111 537 Without touch protection 30 MB 95 Fig.: Type 550 Module units Dimension a Dimension b 37,0 73,0 109,0 1,5 17,0 0,0...-GWE. 5511 5000 5503 550 50 507 With touch protection and mounting bracket 30 MB 97 Fig.: Type 5013 Module units Dimension a Dimension b 0,5 7,5 1,5 17,5 0,0,5...-GWE. 507 5517 5011 5013 501 5015 Further information at Bals.com. Voltages and frequencies not listed here available on request. 5
ACCESSORIES FOR AND Cable Gland Black Protection degree IP7 Thread Sealing range M 3- mm 507 M0 - mm 50 M5 11-17 mm 509 M3 15-1 mm 5050 M0 19- mm 5051 Multiple sealing insert for M5 x mm 505 for M3 x mm 5053 Cable Gland with Pressure Equalisation The use of pressure equalisation cable glands allows the internal pressure to adjust to the ambient pressure. The type-tested protection degree of the enclosure is fully retained. Temperature fluctuations, intense sunlight, or a sudden change in weather can cause condensation to form in combination enclosures. Basically, condensation can form in all sealed combination enclosures. The higher the protection degree is, the more likely the formation of condensation will be. We therefore recommend, especially in the case of distributors with protection degree IP7, the use of pressure equalisation cable glands. Mounting Set Lock Set Minimised condensation formation and therefore reduction in downtimes and time-consuming and expensive repair work No expensive and high-maintenance ventilation technology required No drip holes which reduce the level of protection With air ducts for pressure equalisation black Protection degree IP7 For VARIABOX S - XL, MODBOX and MODBOX-Midi Consisting of: screws x 0 mm, screw anchors x 51 mm 500 For VARIABOX XXL Consisting of: screws x 0 mm, screw anchors x 51 mm 5077 For MODBOX operating window With locking cylinder and keys 5037-BE For OTC window MODBOX-Midi With long shackle and keys 50 Portable Stand Thread Sealing range M0 - mm 505 M5 9-17 mm 5057 M3-1 mm 505 M0 1- mm 5059 For MODBOX and MODBOXMidi Hot-dip galvanised steel tubing Folding Weight kg Dimensions: 350/570 x 70 x 50 mm (W x H x D) 5071 Portable Stand For VARIABOX M, L, XL Hot-dip galvanised steel tubing Folding Weight kg Dimensions: 350/570 x 70 x 50 mm (W x H x D) Surface Mounting Socket Outlets Unit For VARIABOX M and L Colour yellow, RAL 103 501 503 Further information at Bals.com. Voltages and frequencies not listed here available on request.
STAINLESS-STEEL DISTRIBUTORS, CONCRETE BASES Power-Port Free-Standing Distributor without door Dimension of enclosure: 00 x 350 x 75 mm Enclosure made of high-quality VA stainless steel Brushed surface Mounting plate for fitting Bals enclosures Moveable panel for concealing cables Base plate suitable for pedestal mounting Available in different colours (optional) Power-Port Free-Standing Distributor with door 5 MB 59 5059 Dimension of enclosure: 00 x 350 x 15 mm Enclosure made of high-quality VA stainless steel Brushed surface Door with box lock and single profile cylinder, internal hinges Mounting plate for fitting Bals enclosures Brush seal prevents dirt and dust from entering when door is closed Outgoing cables can be guided out through brush-sealed opening on front side Moveable panel for concealing cable Base plate suitable for pedestal mounting Available in different colours (optional) 5050 5 MB 55 Protective Rain Canopy Enclosure made of high-quality VA stainless steel With side panels Brushed surface Mounting plate for fitting VARIABOXES Available in RAL colours (optional) Dimensions (mm) for VARIABOX 55xx3 S, M, L 50511 79xx3 XL, XXL 5059 x51x3 L DUO, XL DUO 5051 Concrete Bases For ground/floor attachment For Power Ports and bollards ø 73 mm and ø 3 mm 5370 For bollards ø 50 mm 537 5370-5 MB 537-5 MB Further information at Bals.com. Voltages and frequencies not listed here available on request. 7
Bals Elektrotechnik GmbH & Co. KG D-57399 Kirchhundem-Albaum Telefon: +9 7 3/771-0. Fax: +9 7 3/771-177/17 email: info@bals.com. Internet: www.bals.com 05.1