checklist: public area / municipalities

checklist: public area / municipalities A company of the PCE-group

General data Date: Building project: Customer: Address: Contact person: E-Mail: phone: Demand (e.g. market/concerts): User frequency (e.g. weekly/once a year): Underfloor distributor with spindle drive Underfloor distributor with hinged cover Stainless steel distributor Amount of supply points: Site (e.g. walkway/street): Hillside situation: yes no Soil characteristics: Groundwater higher than 1 m: yes no Protection of monuments: yes no Problems with vandalism: yes no Flooding hazards: yes no Drainage available: yes no Passable for vehicles: yes no Stainless steel energy bollard Marketplace distributor MS290 connection column 2 3

Underfloor distributor with spindle drive The in-ground underfloor distributors are connection columns for power, data interface, water and other media what are embedded in the ground. They get quickly brought into position when they are needed and provide an up to date flexibility. Underfloor distributor with hinged cover The underfloor distributors with hinged cover have a bearingload of up to 40 t, they can also be delivered with a checker plate cover. For locations without vehicle traffic, there are the according cost-effective versions with a load handling of 1,5 t available. Maximum security (proven through the VDE mark of conformity) Vandal-proof (and blends into its surroundings when retracted in the ground) Quickly ready-to-use (retract, connect, ready) Surface adaptation (the cover is individually fillable with cobblestone) We provide everything to fulfill your wants (from the planning to the installation) Closed complete unit Integrated drainage Individual two-sided assembly No foundation is needed Easy opening through a gas strut Solid design made of 14301 material (V2A) Surface adaptation (the cover can be filled individually) Walkable and passable while in operation Load-bearing capacity through embedding in concrete on-site High-quality chrome and nickel-steel materials An additional locking prevents the opening of the underfloor distributor by itself; what is caused by passable motor vehicles. Individual, customized assembly Cable installation is possible in two different directions 4 5

Planning instructions In order to guarantee an error-free functionality, a smooth installation and connection, you should absolutely take different local conditions into consideration when it comes to your demand planning! Technical data - underfloor units Preferred type of design: Hinged cover S spindle drive Wastewater Devices with a wastewater connection have to be connected to the sewerage necessarily. Drainage A drainage is necessary to protect the electrical room from water and to avoid that the underfloor devices get filled up with water. The design with connection to the sewage system is generally to be preferred. Load-bearing of the cover (SEK):: 1,5 t 12,5 t 25 t 40 t Cover is fillable with cobblestone (SEK): yes no Assembly: equipping MCB RCCB Water Other matters Devices se sek CEE16A 5p 400V cee 32 5p 400v cee 63a 5p 400v cee 125a 5p 400v cee 16a 3p 220v safety sockets 16a 250v 16a c 1p 16a c 3p 32a c 3p 63a c 3p 125a c 3p 40/0.03a 4p Typ a 63/,0.03a 4p Typ 4 63/0.3a 4p Typ 4 100/0.03a 4p Typ a 125/0.03a 4p Typ 4 water supply 1/2 wasterwater quick coupling 2 In case that this is not possible, the device can be set up in a seepage bed and be surrounded by a drainage pipe. Important: The coarse seepage bed is to be protected against fine dirt particle by employing a nonwoven. Otherwise, the seepage bed gets clogged up and a backup occurs! 1 2 3 4 5 6 7 8 Hillside situation has to be considered separately! 9 10 Flooding hazard and a high groundwater level In order to guarantee the functionality of the devices even in case of flooding and high groundwater table; the service distributor can be effused with a casting resin. The power distributor can additionally be protected through a diving bell. System configuration: tt tn-c TN-S Material of the supply cable: al cu Connecting terminals for: mm2 Load-bearing classes according to DIN EN 124/1229. Depending on the type, our underfloor distributors are available with the cover load-bearing capacities 1.5 t, 12.5 t and 40 t. Through-wiring: yes no load-bearing classes according to din en 124/1229 1.5 t Load-bearing class A15 Traffic areas that can exclusively be used by pedestrians and cyclists. 12.5 t Load-bearing class B125 Sidewalks, pedestrian zones and comparable areas. Passenger car parking areas and passenger car parking levels. 40 t Load-bearing class D400 Roadways of streets (also pedestrian streets), road shoulders and parking areas that are authorized for all types of road vehicles. 6 7

MS290 connection column Large and elegant or small and compact - the MS290 is impressive in any form and is a practical addition to each public space. The lockable door ensures the right quantum of security and eliminates the use by unauthorized persons. Due to the clear and modern design our energy columns contribute positively to the appearance of cities. Our energy profiles are flexible and user-friendly. We are happy to consider your wants & needs and to find the best solution for it. Stainless steel energy bollard A supply solution coupled with a restricted access to exposed places is a new opportunity to combine an intelligent power supply with a blocking system and shows a new quality compared with conventional objects. Existing functions are maintained and complemented by new ideas. Access roads and spaces can be used manifolded without affecting city- and street-scenery. The energy bollards allow a power supply and at the same time they are used as passage and way security. For public places Made of high-quality, anodized aluminum Weather-resistant, impact-proof and shockproof lockable Individual customized assembly In all RAL colors available upon request Corrosion-resistant and resistant against environmental conditions Standard color is DB703, special colors and powder coating is possible Ground anchoring via flange plate Lockable, with profile half cylinder as standard Multi-outlet distribution IP 54 wired ready-to-use In winter, it is possible to use frost protection convectors and additional heating. The supply with water can be ensured Diameter 330 mm; standard heights: 650, 850, 1050, 1280 and 1500 mm 8 9

Stainless steel distributor The stainless-steel wall-energy distributors are the perfect solution, wherever a connection from the ground is not possible and the power supply from the wall should take place. A retrofitting is possible by the variations in-wall- and on-wall-mounted distributors. Thanks to the stainless steel construction, the wall distributors are ideally suited for outdoor use. Technical data - wall supply units Preferred type of design: surface-mounting Flush-mounting Assembly: Devices 1 2 Surface-mounting Flush-mounting equipping MCB RCCB Water Other matters CEE16A 5p 400V cee 32 5p 400v cee 63a 5p 400v cee 16a 3p 220v safety sockets 16a 250v 16a c 1p 16a c 3p 32a c 3p 63a c 3p 40/0.03a 4p Typ a 63/0.03a 4p Typ 4 63/0.3a 4p Typ 4 100/0.03a 4p Typ a Water 3 4 Corrosion-resistant and resistant against environmental conditions Your favored assembly and fuse protection The surface is polished standardly, powder coating is possible by request Lockable door with profile half cylinder lock Material thickness from 1,5 to 4 mm Through cable outlet also usable in closed condition Cable entry is possible from below and above 5 6 7 8 9 10 Supply cable: Fuse protection: Connecting terminals for: mm2 Through-wiring: yes no 12 13

Marketplace distributor The Market-place distributors of corrosion-resistant steel are the solution for market and festival places in case a supply from the ground is not desired or not possible. By the precious stainless steel finish, the Market-place distributors optimally fit into the general view. Especially in modern designed market- and festival places it is useful to offer these supply units. Less expensive are versions with a housing made of galvanized, powder coated sheet steel. Technical data - marketplace distributor Assembly: Device 1 2 3 4 equipping MCB RCCB Other matters CEE16A 5p 400V cee 32 5p 400v cee 63a 5p 400v cee 16a 3p 220v safety sockets 16a 250v 16a c 1p 16a c 3p 32a c 3p 63a c 3p 40/0.03a 4p Typ a 63/0.03a 4p Typ 4 63/0.3a 4p Typ 4 100/0.03a 4p Typ a 5 The solid enclosures can be delivered as well as made of galvanized, powder coated steel plate or V4A (1.4571) stainless steel. A base with internal mounting points got integrated for the mounting of the marketplace distributor. Cable outlet of the connected outlets is also possible with closed door. The door with espagnolette lock consists of swivel lever and profile half cylinder. The cable entry is carried out from below (depending on the type from 0 to maximum 71 mm) The entries and outlets are individually placeable. A register for direct or transformer measurement is available upon request. 6 7 8 9 10 Supply cable: Fuse protection: Connecting terminals for: mm2 Through-wiring: yes no Material: stainless steel steel plate powder-coated DB703 ral/db 14 15

At Moser, we always aim to offer you exactly what you need for your project. Make the most of our engineering know-how and of the freedom which we offer with our systems! Checkliste-Komunnal-E-2018/03-1 Moser Systemelektrik GmbH Kernerstraße 15 74405 Gaildorf Germany Phone: +49 (0) 7971/252 70 info@moser-systemelektrik.de www.moser-systemelektrik.de