New construction Downlighting Project: Location: Cat.No: LyteCaster Remodeler Type: Lamps: Notes: Qty: Round downlight Philips Lightolier LyteCaster LED Downlights are ideal general purpose downlighting solution, providing comfortable, quality light. Available in new construction and remodeler frame with interchangeable light engine that is offered in two lumen packages. The downlight is wet location listed and comes in 3 standard option. Complete product = Frame-in kit + Light engine + Trim Order each separately Ordering guide: Frame-In kit Example: AEVA Lumens Frame type Dimming voltage Version VA LyteCaster Round blank A AirSeal IC, New Construction, Screw AN AirSeal IC, New Construction, Nail R AirSeal IC, Remodeler E ELV dimming 2V VA Version A 2 Z -V U Universal Ordering guide: Light engine Example: 82VA Lumens CRI CCT Version VA LyteCaster Round 8 8 2 2K 3 3K K 4 4K 9 9 2 2K VA Version A 2 Note: Lumen output is calculated based on 8 CRI and K CCT. Please consult adjustment factors table on page for other lumen outputs. Ordering guide: Trim Example: DW Luminaire type Finish LyteCaster Round D Open Downlight D Clear diffuse (with white flange) W White (with white flange) B Baffle Downlight W White (with white flange). When ordering a Frame-in kit and a Light engine, the lumen package code must match. 2. Version A (VA) frames and light engines are not compatible with previous versions. LyteCaster Downlight Spec / page of
BAFFLE TRIM 4 3/ (mm) 6 / (mm) FRAME-IN KIT 3" Min. (33mm) 24" Max. (6mm) 2 /6" LyteCaster Round 4 3/ 2" 3 /(mm) 6 / (mm) / New construction 8 /4" (2mm) frame-in kit Bottom view /2" 3 /2" / 8 /4" (2mm) 3 3/ 2 /6" (2mm) 3" Min. (33mm) 24" Max. (6mm) Cut out 6 /6" (63mm) FRAME-IN KIT Max. ADJUSTABL Downlight trim 3" Min. (33mm) 24" Max. (6mm) Light engine 2 /6" 4 3/ (mm) 6 / WARM GLOW (mm) LIGHT MODULE " /2 3 3/ /2". Housing:.26" galvanizedcut steel. clips: Permit easy 6. out 4. Retaining Max. UL listed for direct contact with and fast installation of 3 / thermal insulation. Airseal light engine/trim. 3 housing minimizes air leakage. Mounting bars:.9" to less than 2 CFM at.psf galvanized steel. Bars pivot (or PA), which complies for easy attachment and with the International Energy wire-in below ceiling line. Conservation Code, and Bars extend to accommodate Washington State Energy Code Cut out 6" (46mm) tomax. 24" (6mm) (Section 2.4). This reduces O.C. joist spacing. Bars can heat loss and condensation accommodate 2" (mm) in ceiling. Access door for O.C. joist spacing after a inspection of junction box. slight field modification (see. 2. Lower frame and top cover: Instruction sheet). Features.26" galvanized steel. integral self tapping phillips/ Accommodates ceilings up to square drive screws for secure FRAME-IN KIT ¼" thick. 3/ (9.mm) attachment to wood or metal deep integral lip with four construction. Also available notches at 9 apart to simplify with integral nails. Attaches alignment. Locks into position to T-bar ceilings without the along length of mounting bars need of accessories. Bars with locking screws. installed on shortest dimension of frame,but can be easily 3. Junction Box: 2. X 3/ X repositioned 9 degrees from 2" (2 cu. in).32" galvanized original position. steel. UL listed 9 supply conductors. Rated for branch circuit wiring supplying connected luminaires (daisy chaining). Features FRAME-IN KIT LIGHT MODULE 3 /2" Electrical WARM GLOW LIGHT MODULE /8 lifetime Driver: ELV: 2V, /6Hz. " LIGHT MODULELifetime: Expected, hours and backed by a RoHS compliant, Class 2 power / 4 -year warranty. supply. Complies with FCC 8 " (2mm) (seetrim Philips.com/warranties rules per Title 4 Part (Class BAFFLE ADJUSTABLE TRIM for details) B) for EMI / RFI (conducted & radiated). Class A sound rating. Recommended dimmers -V: 2/2V, /6Hz. RoHS compliant, Class 2 power See LED-DIM Specification Sheet. supply. Complies with FCC rules per Title 4 Part (Class Labels A) for EMI / RFI (conducted & culus Listed BAFFLE TRIM Type I.C., frames radiated). Class A sound ADJUSTABLE TRIM rating. are suitable for damp location. Ceiling cutout: ½". Trims are culus suitable for wet3" location (no shower lens Min. (33mm) unit required). Complies with 24" Max. (6mm) Air Leakage. Energy Star certified. /2" 3 3/ LyteCaster Downlight Spec / page 2 of Cut out Max.
LyteCaster Round Remodeler kit Bottom view 2 / (38mm) 3/4" (46mm) 3 / (92mm) 3/ (3mm) 2 3/4" (mm) 3/ (3mm) /2 " (3mm) /2 " (3m Features. Housing:.32 Aluminum. UL listed for direct contact with thermal insulation. Integral retaining spring secures housing to ceilings up to 2" thick. Removable for access to junction box and ceiling plenum. ½" maximum for use in 2" x 6" joist construction and shallow plenum applications. Airseal housing minimizes air leakage to less than 2 CFM at.psf (or PA), which complies with the International Energy Conservation Code, and Washington State Energy Code (Section 2.4). This reduces heat loss and condensation in ceiling. 2. Junction Box: 2 ½" x 2 ½" x 4 ⅞" (29 cu in.).3 galvanized steel. UL listed for 9 C supply conductors. Rated for branch circuit wiring supplying connected fixtures. 3. Retaining clips: Permit easy and fast installation of light engine/trim. 4. Driver: ELV /Triac: 2V, /6Hz. RoHS compliant, Class 2 power supply. Complies with FCC rules per Title 4 Part (Class B) for EMI / RFI (conducted & radiated). Class A sound rating. -V: 2/2V, /6Hz. RoHS compliant, Class 2 power supply. Complies with FCC rules per Title 4 Part (Class A) for EMI / RFI (conducted & radiated). Class A sound rating.. Ceiling cutout: ½". Electrical Lifetime: Expected lifetime, hours and backed by a -year warranty. (see Philips.com/warranties for details) Recommended dimmers See LED-DIM Specification Sheet. Labels culus Listed Type I.C., frames are suitable for damp location. Trims are culus suitable for wet location (no shower lens unit required). Complies with Air Leakage. Energy Star certified. LyteCaster Downlight Spec / page 3 of
LyteCaster Round Reflector: Round downlight Std 2 3 4 6. Housing: (. ) thick powder coated aluminum provides integrated thermal management allowing for a low profile at less than 3-/2 tall. 2. LED board: High efficiency mid-flux LED s. 3. Mixing chamber: 98% reflective, highly diffuse film. 4. Diffusion lens: (.6 ) thick acrylic opal lens provides an even source of illumination.. Retaining ring: (.4 ) thick powder coated aluminum, secures module components. 6. Reflector: 3% glass reinforced injection molded polycarbonate is durable and provides a cutoff to the source.. Retaining clips: 29 gauge Stainless Steel, allows tool-less installation of light engine to trim. Electrical specifications Frame-in kit / Remodeler Lumens volts freq. current LED drive current power LED power THD factor AEVA / REVA 2V /6Hz.A 26mA 2W W <2% >.9 AZUVA / RZUVA Power factor 2V /6Hz.A 26mA 3W W <% >.9 2V /6Hz.6A 26mA 3W W <% >.9 AEVA / REVA 2V /6Hz.6A 3mA W 3W <2% >.9 AZUVA / RZUVA 2V /6Hz.26A 3mA 6W 3W <% >.9 2V /6Hz.A 3mA 6W 3W <% >.9 LyteCaster Downlight Spec / page 4 of 6" Std 2
LyteCaster Round 8 CRI, lumens Candela Curves Angle Mean CP Lumens Single unit data Coefficients of utilization 2 4 6 2 2 3 4 6 6 8 8 9 46 4 29 49 9 429 38 34 289 236 84 9 63 28 2 22 24 222 6 Frame: AEVA / AZUVA / REVA / RZUVA Light engine: 8VA Trim: DW Report no 3 : 68GFR Output lumens: 9 lm Watts :.6 W Spacing Criterion:.2 Efficacy: 2.6 lm/w CCT 2 : K CRI: 8 93 48 3 Height to Lighted Plane 22 9 Beam Dia. (ft)* 6.'.2' 8.4' 9.. * Beam diameter is where foot-candles drop to % of maximum. Multiple unit data - RCR 2 Spacing on center 49. 32. 23.2 9.3. 3x3x' Room, Workplane 2. above floor, 8//2% Reflectances Watts per Sq. Ft...34.24.2.6 Ceiling 8% % % 3% % Wall 3 RCR Zonal cavity method - Effective floor reflectance = 2% Room Cavity Ratio Zonal lumens & percentages Zone Lumens %Luminaire -3-4 -6-9 9 9 9 9 6 6 6 6 6 2 99 4 9 99 94 96 9 8 2 94 88 83 92 82 89 8 8 8 4 3 93 84 6 82 9 69 6 64 4 86 6 6 4 6 6 69 9 6 8 68 9 3 6 3 6 2 63 2 49 6 4 6 3 4 6 4 9 4 46 44 69 6 48 42 42 4 42 2 4 39 8 64 43 38 38 49 38 48 3 9 6 4 4 34 4 34 46 34 34 32 6 44 36 3 43 3 42 3 4 3 29 48 649 36 9 34.3% 4.% 8.%.% CRI and CCT adjustment factors 9CRI 2K: =. 8CRI 2K: =.89 8CRI 3K: =.9 8CRI K: =. 8 CRI, lumens Candela Curves Angle Mean CP Lumens Single unit data Coefficients of utilization 2 4 6 8 2 2 3 4 6 6 8 8 9 Frame: AZUVA / AEVA / RZUVA / REVA Light engine: 8VA Trim: DW Output lumens: 494 lm Watts :. W Spacing Criterion:. 3 69 682 66 69 6 2 44 4 29 234 2 8 66 8 26 296 2 29 2 6 Report no 3 : 89GFR Efficacy: 9. lm/w CCT 2 : K CRI: 8 Height to Lighted Plane 28 2 4 9 Beam Dia. (ft)* * Beam diameter is where foot-candles drop to % of maximum. Multiple unit data - RCR 2 Spacing on center 62. 4.8 29. 24.3 9.4 3x3x' Room, Workplane 2. above floor, 8//2% Reflectances. 6.. 8. 9. Watts per Sq. Ft...46.33.2.22 Ceiling 8% % % 3% % Wall 3 RCR Zonal cavity method - Effective floor reflectance = 2% Room Cavity Ratio Zonal lumens & percentages Zone Lumens %Luminaire -3-4 -6-9 9 9 9 9 6 6 6 6 6 2 99 4 9 99 94 96 9 8 2 94 88 83 92 82 89 8 8 8 4 3 93 84 6 82 9 69 6 64 4 86 6 6 4 6 6 69 9 6 8 68 9 3 6 3 64 2 63 2 49 6 4 6 3 4 6 4 9 46 46 44 69 6 48 42 42 4 42 2 4 39 8 64 43 38 38 49 38 48 3 9 6 4 4 34 4 34 46 34 34 32 6 44 36 3 43 3 42 3 42 3 29 6 8 29 494 34.% 4.3% 86.%.% CRI and CCT adjustment factors 9CRI 2K: =. 8CRI 2K: =.89 8CRI 3K: =.9 8CRI K: =.. Wattage: controlled to within ± % 2. Correlated Color Temperature: within specs as defined in ANSI_NEMA_ANSLG C8.3-28: Specifications for the Chromaticity of Solid State Lighting Products. 3. Tested using absolute photometry as specified in LM9: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. 26 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/luminaires LyteCaster Downlight Spec / page of Philips Lighting North America Corporation 2 Franklin Square Drive, Somerset, NJ 883 Tel. 8-486-226 Philips Lighting Canada Ltd. 28 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel. 8-668-98