Short Tail Swing Mini xcavators 45V4-F / 55V4-F / 60V4-F Please read carefully instruction manuals before operating machines, and use them correctly and safely. Please perform periodically check and maintenance for machines to prevent from troubles and accidents. Photographs may differ in some cases from actual objects. Specifications are subject to change without notice due to technical improvements or modifications. istributed by: Sales ivision 3174 Showa-machi, Kanazawa-ku, Yokohama, Kanagawa 236-8611, Japan Tel: +81-45-276-1249 Fax: +81-45-276-2583 http://www.ihi-kenki.co.jp IK13231404K20
TH LL NW V4 -F THT RINGS IN USTOMR NS Safety omfortable 45V4-F 55V4-F conomy H High Performance 60V4-F 2 3
aving S afety conomy 45 4-F 8 17 WORL-STNR SFTY LOW FUL ONSUMPTION 55 4-F 9 ROPS/FOPS ompliance Operator Room ROPS/FOPS anopy (Standard) ROPS abin (Option) FOPS abin (Option) RROR-PRVNTION 45V4-F Max. 17% 55V4-F Max. 8% 60V4-F Max. 9% Fuel saving *omparison with our former models (in use of uto Idle & co Mode) 60 4-F Former models 0 20 40 60 80 100 ll-lever lock structure Neutral engine-start structure uto-parking brake in swing & traction motors ROPS/FOPS anopy (Std.) SY MINTNN Large covers for easier access 45V4-F ll operations are blocked when the lever is raised. omfortable ROPS abin (Opt.) OMFORTL OPRTOR ROOM N SY MNIPULTION Wide Open asily visible monitor ngine room entralized switches (Right console box) Wider ngine starter switch Throttle dial Wider uto Idle selector switch Light switch Work mode selector switch Right hand cover Trouble reduction by 3 measures 1 ngine warning 2 Travel speed 3 Glow 4 attery charge warning 5 ngine oil pressure warning 6 Water temperature warning 7 uto idle 8 ontrol lock warning 9 Water-separator warning 10 O mode 11 PF warning 12 Water temperature gauge 13 Fuel gauge 14 Hour meter Legroom enlarged by 20% abin room enlarged by 25% *omparison with our former models Spare power port (12V 10) 1 Resin-made fuel tank 2 Large fuel filter 3 Water-separator * The warning turns on if water is collected up to the specified level. Hydraulic tank with ir breather 4 5
conomy URL N RPIRL SY FUL RFILLING UTO-SHIFT TRTION Warranted and durable rubber shoes Tough Track The rubber shoe is warranted for either 2 years or 1500 hours against steel cord cut-off. (Terms and conditions are based on our warranty standards.) utomatically shifted travel function onventional Tough Track 200 down ore metal shape Overlap structure Tough Track spiral structure ore metal edge FM analysis asily adjustable pins and longer life urable structure and easy care 1100 1300 (Former models) astle Nut for rm-end astle Nut for oom and rm joints Refilling position (unit : mm) uto high speed mode Low speed mode selector switch Single-structured Swing Pin oom and rm joints rm-end ucket rattle adjuster High Performance SY SKIMMING WORK lose distance between ucket Tooth and ozer lade SLTL WORKING MOS Workable slowly and economically O Mode (Fuel saving) Selectable 45V4-F 55V4-F 60V4-F Workable speedily and poerfully Vmax Mode (High speed) XLLNT STILITY HIGH POWR IGGING N QUIK RSPONS nlarged stability by counterweight design ucket digging force increased by 10% (*omparison with our former models) Travel Quickly responsive 3-pump system ucket Service lade oom rm oom Swing Travel (R) Travel (L) Swing ngine P1 P2 P3 3-pump system 45V4-F 55V4-F 60V4-F 6 7
STL IN High Performance WI OPN SPS QUIPMNT / OPTIONS escription Standard equipment Optional equipment Remarks ROPS abin Operator room ROPS/FOPS anopy (4-Post) FOPS Guard Heater or ir-conditioner 2-Post anopy ( ) ( ) No ROPS compatibility Seat Suspension Seat High back suspension seat Fabric suspension seat ontrol lever with propotional switch w/o propotional switch( ) ( ) combination with G Lever pattern Type (ISO standard) F changer changer ontrol pedal oom swing pedal Traction foot pedals F 1st aux. hydraulic control pedal G rawler Rubber shoes Steel shoes Rubber Pads H rm Standard arm Long arm (+250mm) uacket Standard bucket igging buckets ( ) Loading buckets ( ) ( ) Various sizes uxiliary hydraulics 1st auxiliary hydraulic piping 2nd auxiliary hydraulic piping 3rd auxiliary hydraulic piping Other options Remarks ust preventive net For Radiator Fully openable windows High eiling Rear-view mirror dditional counterweight I Overload relief valve For combination with Steel abin 45V4-F only Motion alarm Steel abin (ROPS) Heater Upper window Retractable 2-Post anopy High back seat ontrol lever with proportional switch Lever pattern selector Right side view Frontal view Left side view FTraction foot pedals Gux. hydraulic control pedal (1st) 1 Flow hold switch 2 Flow mode selector switch HRubber Pads Idditonal counterweight of 45V4-F 1 2 Right side windows Inside view left side door 8 9
45V4-F imensions (unit : mm) 45V4-F Working Range (unit : mm) 45V4-F Specifications 640 385 1840 5280 ucket width 600mm Operating weight anopy (abin) 4705 4855 kg Transportation weight anopy (abin) 4630 4780 kg Swing speed 2490 Travel speed (low/high) 55 995 Ground pressure 400 150 135 F 55V4-F imensions (unit : mm) Max. digging radius Max. digging depth Max. digging height Max. dumping height Max. vertical digging depth Min. front turning radius t right boom swing Std. rm 5760 3340 5380 3720 2520 2320 2010 Long arm 5970 3590 5470 3820 2690 2420 2100 55V4-F Working Range (unit : mm) 2.9/4.6km/h 58 30 27kPa 0.28kgf/cm2 31.0kN 3160kgf Model Rated output Fuel tank capacity KUOT V2403-R 32.4kW 44.1PS /2400min 1 66L 640 385 2570 Performance 1840 1090 80 Operating weight anopy (abin) 5065 5215 kg Transportation weight anopy (abin) 4990 5140 kg Gradeability Ground pressure 160 60V4-F imensions (unit : mm) 9.3min 1 2.9/4.6km/h 58 30 29kPa 0.30kgf/cm2 31.0kN 3160kgf ngine 400 650 1155 150 1075 0.16m 650mm Max bucket digging force 830 750 ucket capacity Travel speed (low/high) 2490 F Max. digging radius Max. digging depth Max. digging height Max. dumping height Max. vertical digging depth Min. front turning radius t right boom swing Long arm 6200 3830 5610 3960 2930 2460 2130 60V4-F Working Range (unit : mm) Model Rated output Fuel tank capacity KUOT V2403-R 32.4kW 44.1PS /2400min 1 66L 2570 ucket capacity ucket width 640 385 5510 2490 Transportation weight anopy (abin) 5350 5500 kg Ground pressure 400 Max bucket digging force 185 9.3min 1 2.9/4.6km/h 58 30 31kPa 0.32kgf/cm2 41.2kN 4200kgf ngine 1100 700 150 830 1180 750 105 Gradeability 1120 700mm 5425 5575 kg Travel speed (low/high) Max. digging radius Max. digging depth Max. digging height Max. dumping height Max. vertical digging depth Min. front turning radius t right boom swing Std. rm 6200 3800 5710 4050 2980 2450 2120 Pressure Pump hydraulic flow 24.5MPa 250kgf/cm2 20.6MPa 210kgf/cm2 60.0 L/min 2+ 44.2 L/min ozer blade Size Lift above ground / rop below ground 385mm 460mm / 430 mm Max auxiliary flow 1st line 60L/min 2nd line 44L/min Type Swing angle (L/R) oom ofset with hydraulic cylinder 80 / 50 Hydraulic system Pressure Pump hydraulic flow 24.5MPa 250kgf/cm2 20.6MPa 210kgf/cm2 60.0 L/min 2+ 44.2 L/min ozer blade Size Lift above ground / rop below ground 385mm 460mm / 430 mm Max auxiliary flow 1st line 60L/min 2nd line 44L/min oom swing system 0.18m3 Operating weight anopy (abin) Swing speed F 80 / 50 Hydraulic system 60V4-F Specifications Performance 1840 Swing angle (L/R) oom ofset with hydraulic cylinder oom swing system 3 ucket width Swing speed Std. rm 5970 3590 5470 3820 2690 2420 2100 Type 55V4-F Specifications 5370 10 9.3min 1 ngine 600 750 1050 0.14m3 Gradeability 60V4-F ucket capacity Max bucket digging force 830 1130 55V4-F oom swing system Performance 2570 45V4-F Long arm 6440 4040 5860 4200 3220 2470 2130 Model Rated output Fuel tank capacity KUOT V2403-R 32.4kW 44.1PS /2400min 1 66L Type Swing angle (L/R) oom ofset with hydraulic cylinder 80 / 50 Hydraulic system Pressure Pump hydraulic flow 24.5MPa 250kgf/cm2 20.6MPa 210kgf/cm2 60.0 L/min 2+ 44.2 L/min ozer blade Size Lift above ground / rop below ground 385mm 460mm / 430 mm Max auxiliary flow 1st line 60L/min 2nd line 44L/min 11