CUSTOMIZED MODULAR ROLL STANDS SOLUTION SERIES Complete, pre-configured solutions for custom modular roll stands, nip / pull roll stations and slitting stations retrofitted for existing machines or as stand alone units. Unwind Stands Nip / Pull Roll Stations Slitting Stations Winders / Rewind Stands Featuring the finest quality shafts, safety chucks, tension control systems, brakes and rollers from the Double E Company, Double E/ Re, and Mario Cotta DOUBLE E COMPANY, LLC Excellence in Engineering
Designed to Fit Your Needs Complete L Whether the application requires a retrofit to an existing machine or a complete stand-alone solution, Double E will engineer a roll stand to accommodate most standard dimensions and configurations. Purchase a system with only the features you DO need. Faster delivery than many full line machines. Have a system created that incorporates any combination of roll stand, slitting station and/or nip / pull roll station. Custom control systems that integrates into existing production line controls. Custom framework available for single compact machine if needed. Green Technology Regenerative Drive Option This option is available on driven unwind stands and uses the motor to regenerate power back to the control system thereby saving energy and resources when using a driven unwind with nip or driven unwind with rewind. Retrofit Double Unwind Stand This custom stand was created for a customer who required a retrofitted double unwind stand that incorporated a closed loop tension control with load cell frames. This stand was engineered to bolt onto the customer s existing machine. Unwind Stands Pre-assembled roll stand carries a warranty as a package from one supplier. All components work together for optimal unwind control without the hassle of installing each accessory separately. Simple way to introduce web guiding. Lighter shafts, safer loading. Available models: - Simple Unwind Stand (S) - Open Loop Tension Control (OL) - Closed Loop Tension Control (CL) Available options: - Automatic zero-speed lap splicing - Mobility - Festoons / accumulators for start / stop processes - Footage counters - Web guiding - Web break detection - Manual splice table Stand-alone Triple Unwind The triple unwind stand is a unique design that was engineered for a producer of laminated film. The customer needed a more efficient method for manufacturing a five-layered material. Since the customer already had three individual stands, Double E engineered this stand to replace one of those single unwind stands to give them a total of five unwind sections.
ine of Customized Modular R Slitting Stations Custom-built to exact needs and specifications to handle a variety of material types, tolerances, edge quality, and width requirements. Various high-quality Mario Cotta knife holders available. Modular design allows for shear, crush, or razor configurations. Uses patented Expando bottom knives no need to remove shaft from machine to refresh anvil cutting surfaces. Integrated nip section set knife shaft over-speed directly from driven nip. Manual, semi-automatic, or automatic positioning for faster changeovers. Stand-alone Trimming Station Sometimes Double E customers just need a simple slitting solution. This basic standalone trimming station was created for a commercial printer who only needed to split a narrow paper material into two sections. The small station was engineered with light yet strong components that would allow the customer to move the stand out of the way when not in use. Nip / Pull Roll Stations The Double E Company manufactures nip roll stations and pull roll stations that you can use to set tension zones or master line speeds. These stations easily synchronize with any section of the production line to help continue production at an even pace and steady tension. Use of induction motors or servo motors. Siemens motor drivers and controls standard - other options available. Custom touch screen programming available. Adjustable nip pressure and options on nip roll coverings. Accommodate a large range of web widths and materials. Entire infeed with tension control using dancer or load cell. Large Format Nip/Pull Roll Nip / pull roll stations can be an integral part of any converting line and in some applications these stations need to be mobile in order to adapt to line configurations. This particular station was created with the control system mounted directly to the rolling stand which allowed the station to be plugged into the overall system where ever it was needed.
oll Stands Highest Quality Web Accessories Double E Shafts Lightweight carbon fiber or metal; lug or strip models. Double E / Re Combiflex Pneumatic Brakes Brakes run cooler for reduced noise and dust pads last longer & cost less. Flexible torque ranges for converters. Winders / Rewind Stands Rugged, complete, packaged solution for center winding web material. Features the highest quality accessories available, appropriately specified for your application, and pre-configured for easy integration into your process. Stands can be configured for multiple web materials. Rewind stands are designed for your specific application. Eliminate starring, telescoping, winding too tight or loose. Available options (includes all unwind stand options): - Lay-on rolls - Oscillation - Footage counters - Differential winding Motorized Rewind with Controller Similar to the nip / pull roll station to the left, mobile motorized rewind stands are also useful in a multi-configurable converting line. This stand also features a control unit mounted directly to the stand to allow it to be plugged into the system when needed. Double E / Re Tension Control Systems Closed loop control with load cells, dancer or open loop control with ultrasonic sensor. Double E / Re Web Guiding with Shifting Actuator DC stepper motors deliver industry leading response time and accuracy. Edge, line, and center guiding. Double E / Mario Cotta Knife Holders & Anvils Various high-quality Mario Cotta knife holders for Shear, Crush, or Razor configurations. Double E Safety Chucks Unique sliding design makes loading and unloading easy, guarantees roll security, and prevents finger jamming. Siemens Drive Components and Controls Siemens provides the most durable and reliable motors and control units in the industry. Other control packages available. Double Cantilevered Rewind This unique cantilevered rewind stand was developed for a customer that produces a narrow film material. The material needed to be rewound at an even tension while being separated into the finished product and the sacrificed material. Large diameter idler rollers were used to protect the sensitive material.
MODULAR ROLL STAND SPECIFICATIONS Company: Date: Name: Title: Address: City: State: Zip: Country: Telephone: Fax: email: GENERAL SPECIFICATIONS Actual Shaft Diameter: Nominal Core I.D.: Core Material: Wall Thickness: Core Manufacturer & Grade: Steel-Capped Cores: All m None m Some m Max. Roll Weight: Max. Roll Width: Max. Roll Diameter: Min. Roll Weight: Min. Roll Width: Min. Roll Diameter: Roll Position on Shaft: Left Right Center Web Speed: Max. Linear Tension (P.L.I.): Min. Linear Tension (P.L.I.): Application: Machine Manufacturer: Machine Type: Primary Web Material: Board Paper Film Foil Other: Material Basis Weight: Material Thickness: Other Web Material(s): Material Basis Weight(s): Material Thickness(es): Hoisted: Yes m No m Air Line Pressure Available: (90 psi recommended) Emergency Stop Time: Current Winding: Center Surface Winding Lay on Roll WEB ALIGNMENT / GUIDING Automatic (shifting actuator) Guiding Type: Edge Line Center Stroke: 2 (50 mm) m 4 (100 mm) m 8 (200 mm) m Manual (sidelay safety chucks) Stroke: 2 (50 mm) m 4 (100 mm) m None m Start/Stop: Yes m No m If yes, please describe: STAND CONFIGURATIONS Simple A-Frame (no tension control) m Open Loop Tension Control (with US sensor) m Closed Loop Tension Control (with load cells) m Motorized Rewind m OTHER OPTIONS Pivot table for safety chucks Footage counter Web break detector Manual splice Casters for mobility Accumulation for Start /Stop Auto splice Oscillation Differential winding
NIP / PULL ROLL STATION SPECIFICATIONS Jog Speed (ft/min): Acceleration Time (sec.): Web Density (g/cc): Supply Power desired (volts/phase): 0-10VDC speed reference available?: Yes m No m Length display/control required?: Master / Slave: m The driven nip will set the master line speed. m The driven nip will speed reference from another master motor. SLITTING SECTION SPECIFICATIONS Application Type: Slitting Trim Other If trim, what is the range of trim width? (in.): Web Conditions: Laminated Coated Glued Other: Cut Type: Shear Crush Razor Number of Slits: Minimum Slit Width (in.): How frequently will the anvils be repositioned?: Please describe the process for needing a custom roll stand. DOUBLE E COMPANY, LLC Excellence in Engineering 319 Manley Street, West Bridgewater, MA 02379 USA Tel: (508)588-8099 Fax: (508)580-2915 doublee@doubleeusa.com www.doubleeusa.com EZZ