Platea design P. Castiglioni - M. Cucinella Features 03 IP66 IK08 Direct light luminaire for use with metal halide, sodium vapour, halogen, fluorescent lamps and LEDs. The fixture is installed into the ground, wall-mounted and on pole. Optical assembly and frame in aluminium alloy; sodium-calcium tempered sealing glass, transparent; superpure aluminium reflector. Graduated scale and mechanical aiming lock. Monochromatic LED version with 36-LED circuit, optics with plastic lenses, glass with customised serigraphy or striped glass, and 100-265Vac 50/60Hz built-in electronic power supply. RGB LED version with 36 multicolour LED circuit, DALI electronic control board, optics with plastic lenses, glass with customised serigraphy or striped glass and 100-120/220-240Vac 50/60Hz built-in power supply. RGB LED versions with DIRECT- DIM: possibility of also adjusting using a simple electric push-button. Luminaire ready for pass-through wiring. All screws are A2 stainless steel. Platea system The floodlight can be pole-mounted. The Platea system is presented on page 385. 534 products.iguzzini.com/platea
Platea Visual comfort Wall washer Baffle Optics and lamps 42W HIT-DE-CE 70-150W RGB 34W HIT-DE 250W WNC 36W HST-DE 70-150W HIT-CE 70-150W SS - Superspot α < 8 S - Spot α from 9 to 15 F - Flood α from 26 to 39 A - Asymmetric EL - Longitudinal Elliptical ET - Transversal Elliptical LL - Longitudinal Light Sliver LT - Transversal Light Sliver Energy saving LED Single Chip Colour stability Mac Adam <3 Life 100000 h L80 Color temperature: Neutral white 4000K Warm white 3000K lumen lm LED HIT/HST HME 2780 42W 83W 49% 92W 54% (3000K) LED energy saving compared with conventional lamps products.iguzzini.com/platea 535
Platea 15 grey accessories light source W* lm optic code colour Neutral white 42 W 3210 8 BA44 15 42 W 3090 28 BA46 15 42 W 3090 LT BA48 15 42 W 3090 LL BA50 15 code colour Baffle 1177 04 for 7379-7380-7385-7386 7391-7394-BA44-BA45 BA46-BA47-BA50-BA51 370 431 146 250 Warm white 42 W 2780 8 BA45 15 42 W 2680 28 BA47 15 42 W 2680 LT BA49 15 42 W 2680 LL BA51 15 RGB DMX512-RDM 34 W 1950 8 BV44 15 34 W 1950 30 BV45 15 WNC DMX512-RDM 36 W 3250 8 BV46 15 36 W 3250 30 BV47 15 Complete with power supply and electronic DMX512-RDM control card. DMX specifications require the insertion of a 120 Ohm terminating resistor (code BZQ7) to be placed between the DATA+ and DATA- cables of the last product in the line. DALI and DMX512-RDM versions with self-addressing are available. HIT-CE (G12) HIT-DE-CE (Rx7s) HST-DE (Rx7s) HIT-DE (Fc2) 70 W ST 7444 15 70 W E 7385 15 70 W LT 7387 15 150 W ST 7445 15 150 W E 7386 15 150 W LT 7388 15 250 W ST 7499 15 70 W ST 7698 15 70 W A 7377 15 70 W 72 /41 7379 15 150 W ST 7699 15 150 W A 7378 15 150 W 72 /41 7380 15 250 W A 7395 15 250 W 72 /41 7394 15 250 W LA 7369 15 Compatible with light management systems of the iguzzini range illustrated on page 659. For the system definition, refer to the instructions. 536 products.iguzzini.com/code * The current W value may be reduced with the progress of technology. For updated data please refer to our on-line catalogue.
design P. Castiglioni - M. Cucinella 8000 7000 6000 5000 3500 Market Square in Rubí Rubí, Barcelona, Spain Architectural project: Josep Miàs, MiAS Arquitectes - Photo: Adrià Goula 250x370 platea products.iguzzini.com/platea_system_line 385
Compositions Arms for conical poles single arm double arm single arm double arm single arm with wall arm intermediate L=632 L=239 Arms for cylindrical poles single arm L=400 single arm L=400 (double composition) single arm with intermediate L=400 single arm L=1500 wall arm L=700 386 products.iguzzini.com/platea_system_line
15 grey Features 03 IP66 IK08 Street lighting system for use with LEDs, metal halide, sodium discharge, halogen and fluorescent lamps. Pole (conical or cylindrical ø 102 mm) or wall-mounted installation. Fitting has an optical assembly, arm (single or double) and pole. Optical assembly and frame in aluminium alloy; sodium-calcium tempered sealing glass; 0-50 Shore A silicone gasket; superpure aluminium reflector. Arm for conical pole in steel (long arm) or pure aluminium (short arm), secured to poles with die-cast aluminium attachment. Arm for cylindrical pole ø 102 mm in galvanized steel; arm installation (designed by Rafael de Cáceres and Antoni Rosellò) with flange, does not require any drilling of the pole. Adjustable optical assembly. Luminaire ready for pass-through wiring. No upward emission of the light flow. High visual comfort. All screws are A2 stainless steel. Adjustable product Installation of the arms with no holes Double cable clamp Optics h I ST - Road optic HIT-DE-CE HST-DE I = 3,9h / d = 1 h A - Asymmetric optic HIT-DE-CE HST-DE h = 8 / d = 1,5 L HIT-CE G12 I = 3,9h / d = 1 L HIT-DE h = 10 / d = 1,5 d = L/h h = Installation height L = Width of area to be lit I = Spacing between poles d= L/h h= Installation height L= Width of area to be lit QT-DE12 ES h = 10 / d = 1,5 370 431 146 250 W light source optic code colour 70 W HIT-CE (G12) ST 7444 15 150 W HIT-CE (G12) ST 7445 15 250 W HIT-CE (G12) ST 7499 15 70 W HIT-DE-CE (Rx7s) ST 7698 15 HST-DE (Rx7s) 370 431 146 250 W light source optic code colour 70 W HIT-DE-CE (Rx7s) A 7377 15 HST-DE (Rx7s) 150 W HIT-DE-CE (Rx7s) A 7378 15 HST-DE (Rx7s) 250 W HIT-DE (Fc2) A 7395 15 150 W HIT-DE-CE (Rx7s) ST 7699 15 HST-DE (Rx7s) The entire range of Platea floodlights is presented in the Floodlights section on page 534. I h L products.iguzzini.com/platea_system_line 387
installation with arms on conical poles length h code colour single pole-top 682 980 1145 15 length h code colour double pole-top 1285 980 1147 15 538 305 1144 15 1057 305 1146 15 270 230 1262 15 460 230 1263 15 intermediate 337 230 1264 15 The intermediate arm can be installed on poles code 1281-1283 (at a height of 4 m off the ground) installation with arms on cylindrical poles wall-mounted installation with arms length code colour single 400 BZ92 15 900 BZ93 15 1500 BZ94 15 length h code colour 538 305 1149 15 The counter flange must be ordered, to secure the arm to the pole. design Rafael De Cáceres and Antoni Rosellò counter flange BZ95 15 239 230 1265 15 To be ordered to secure the arm on the pole. Not required when installing two opposite arms. 700 * BZ96 15 * design Rafael De Cáceres and Antoni Rosellò 388 products.iguzzini.com/code
conical poles h off-ground ø pole code colour buried 4000 106-60 1275 15 7000 138-60 1281 15 9000 158-60 1282 15 with plate 4000 100-60 1278 15 7000 130-60 1283 15 9000 150-60 1284 15 pole-top single arm L=682 The technical specifications of the poles are presented on page 457. Fixing plate with anchor bolts to be ordered separately (page 465). cylindrical poles h off-ground ø pole code colour buried 3500 102 1203 15 5000 102 1205 15 6000 102 1542 15 7000 102 1543 15 8000 127/102 1544 15 The arms can be installed in pair or invidually with flange. with plate 5000 102 1344 15 6000 159/102 1597 15 7000 159/102 1598 15 8000 159/102 1599 15 The technical specifications of the poles are presented on page 457. Fixing plate with anchor bolts to be ordered separately (page 465). products.iguzzini.com/code 389