I-BRICK is a range of wall recessed luminaires with LED and compact fluorescent light sources. The glare-free cover enables I-BRICK to be installed in most places where a comfortable illumination is needed. The high quality LED chip from Samsung and Citizen allow for less energy consumption with acceptable lighting levels. I-BRICK family is available in 5 different front covers in 2 sizes. The shallow housing can be installed in either wall or step where recess depth is limited. The high quality LED driver is integrated inside the luminaire for ease of installation. They are widely used to illuminate stairways, pathways and walls. Vandal proof protective cover. Curve shaped design. Visual comfort. High quality LED from Samsung. Double layer coating. Available in 2 sizes. Available in 6 colors. Efficiency LED driver. 182
Specification Fixture is manufactured in compliance with international standard of general requirement IEC 60598-1, fixed general purpose luminaires IEC 60598-2-1 and recessed luminaire IEC 60598-2-2. Electrical protection class1. Protection against dust and water IP54/ IP65. Protection against mechanical impact IK08 on body and IK06 on optical part. High-pressure Die Cast Aluminium alloy body and components. Nano Ceramic surface conversion, resistant to corrosive environment. Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200 C. Self-extinguishing high impact resistant opal/ prismatic polycarbonate diffuser with UV stabilized additive. Material from Teijin Japan. Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250 C. Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40 C to +200 C. External screws are in stainless steel with protection dipping. Cable entry protected by weather proof EPDM grommet and to be used with H05RN-F/ H07RN-F cable with 6-8mm. diameter. 2G7 lampholder in PBT body from AAG Stucchi or equivalents. IMQ/ ENEC approved. G24d/ GX24d lampholder in PBT body from AAG Stucchi or equivalents. IMQ/ ENEC approved. G24q/ GX24q lampholder in PBT body from AAG Stucchi or equivalents. IMQ/ ENEC approved. G23 lampholder in PBT body from AAG Stucchi or equivalents. IMQ/ ENEC approved. E27 lampholder in ceramic body from Vossloh Schwabe or equivalents. VDE/ ENEC approved. Low loss magnetic ballast for fluorescent lamp from BAG Electronics or equivalents. ENEC approved. Electronic ballast for fluorescent lamp from TCI/ Tridonic or equivalents. ENEC approved. High efficiency LED module utilized Samsung chips. Assembled on MCPCB and mounted on to heat conductive material. High efficiency LED module in COB technology from Citizen - Japan. Assembled on MCPCB and mounted on to heat conductive material. High quality constant current LED driver. Conform to safety standard and electromagnetic compatibility standard. Driver is integrated in the luminaire. The whole systems tested to be operated under maximum ambient environment up to +40 C. Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents. IMQ approved. Working temperature -40 C to +180 C. Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm 2. VDE approved. Class1 luminaire provided with the earth connection. Installation work has to be carried on according to the enclosed installation manual. Available Color Black (replace the last 2 digits of ordering code with 01) Graphite (replace the last 2 digits of ordering code with 02) Dark Grey (replace the last 2 digits of ordering code with 03) Aluminium Silver (replace the last 2 digits of ordering code with 04) Smooth Silver (replace the last 2 digits of ordering code with 05) White (replace the last 2 digits of ordering code with 06) 183
I-BRICK/1 LED 4.1W 450lm 3000K 6000-0-3-935-XX 6001-0-3-935-XX LED 4.1W 470lm 4000K 6000-0-3-938-XX 6001-0-3-938-XX TC-DSE E27 11W 6000-0-2-121-XX 6001-0-2-121-XX TC-D G24d-2 18W 1200lm 6000-0-3-423-XX 6001-0-3-423-XX I-BRICK/2 TC-DEL G24q-2 18W 1200lm 6000-0-3-452-XX 6001-0-3-452-XX 6000-0-3-412-XX 6001-0-3-412-XX TC-SEL 2G7 6000-0-3-416-XX 6001-0-3-416-XX 184
Long I-BRICK/1 LED 6.1W 680lm 3000K Long 6041-0-3-936-XX Long 6042-0-3-939-XX LED 6.1W 700lm 4000K Long 6041-0-3-936-XX Long 6042-0-3-939-XX TC-D G24d-3 26W 1800lm Long 6041-0-3-424-XX Long 6042-0-3-424-XX TC-DEL G24q-3 26W 1800lm Long 6041-0-3-453-XX Long 6042-0-3-453-XX Long I-BRICK/2 Long 6041-0-3-413-XX Long 6042-0-3-413-XX TC-SEL 2G7 Long 6041-0-3-417-XX Long 6042-0-3-417-XX 185
I-BRICK H-Ramp LED 4.1W 450lm 3000K or 470lm 4000K 6061-0-3-935-XX (3000K) 6061-0-3-938-XX (4000K) 6061-0-3-412-XX Long I-BRICK H-Ramp LED 6.1W 680lm 3000K 700lm 4000K 6062-0-3-936-XX (3000K) 6062-0-3-939-XX (4000K) 6062-0-3-413-XX 186
I-BRICK V-Ramp LED 4.6W 380lm 3000K 6063-0-3-980-XX LED 4.6W 400lm 4000K 6063-0-3-981-XX Long I-BRICK V-Ramp LED 4.6W 380lm 3000K 6064-0-3-980-XX LED 4.6W 400lm 4000K 6064-0-3-981-XX 187
I-BRICK V-Grill LED 4.1W 450lm 3000K or 470lm 4000K 6065-0-3-935-XX (3000K) 6065-0-3-938-XX (4000K) 6065-0-3-412-XX TC-SEL 2G7 6065-0-3-416-XX Long I-BRICK V-Grill LED 6.1W 680lm 3000K or 700lm 4000K 6066-0-3-936-XX (3000K) 6066-0-3-939-XX (4000K) 6066-0-3-413-XX TC-SEL 2G7 6066-0-3-417-XX 188
189 I-BRICK