Series 6SHV 21 Frame Driver Specifications: DISCHARGE... 6", 1 lb. Horizontal Flange Slotted to accommodate 1mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Cast Iron ASTM A-48, Class 30 IMPELLER: Design... Vortex, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-6, 65--12 SHAFT... 416 Stainless Steel O RINGS... Buna-N HARDWARE... 300 Series Stainless Steel LIFTING BAIL... 300 Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware - 300 Series Stainless CORD ENTRY... Custom Molded, Quick Connected for Sealing and Strain Relief POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED... 17 or 11RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... White Iron Impeller, Seal Material, Impeller Trims, Cord Length MARKINGS... CSA, CE WEIGHT... 588 lbs (267 Kg) NOISE EMISSION MAX... In-Air 64 db-a SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel Leg Kit C US LR16567 Series: 6SHV 15-30HP, 17RPM, 60Hz 7.5-20HP, 11RPM, 60Hz Sample Specifi cations: Section Page F. This product may be covered by one or more of the following patents and other patent(s) pending: US Patent 7,931,473 & 8,128,360 DESCRIPTION: SUBMERSIBLE NON-CLOG PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. WARNING: CANCER AND REPRODUCTIVE HARM - WWW.P65WARNINGS.CA.GOV 1 11/18
Series 6SHV 28 Frame Driver www.cranepumps.com Series: 6SHV 20-60HP, 17RPM, 60Hz 20-40HP, 11RPM, 60Hz 20-30HP, 870RPM, 60Hz Sample Specifi cations: Section Page F. This product may be covered by one or more of the following patents and other patent(s) pending: US Patent 7,931,473 & 8,128,360 DESCRIPTION: SUBMERSIBLE NON-CLOG PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. WARNING: CANCER AND REPRODUCTIVE HARM - WWW.P65WARNINGS.CA.GOV Specifications: DISCHARGE... 6", 1 lb. Horizontal Flange Slotted to accommodate 1mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Ductile Iron ASTM A-6, 65--12 IMPELLER: Design... Vortex, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-6, 65--12 SHAFT... 416 Stainless Steel O RINGS... Buna-N HARDWARE... 300 Series Stainless Steel LIFTING BAIL... 300 Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware - 300 Series Stainless CORD ENTRY... ft. (12.1m) Cord. Rigid quick change epoxy-potted housing POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED... 17, 11 or 870RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... White Iron Impeller, Seal Material, Impeller Trims, Cord Length MARKINGS... CSA WEIGHT... 1067 lbs (484 Kg) SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel Leg Kit C US LR16567 2 11/18
Series 6SHV 32 Frame Driver Specifications: DISCHARGE... 6", 1 lb. Horizontal Flange Slotted to accommodate 1mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Cast Iron ASTM A-48, Class 30 IMPELLER: Design... Vortex, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-6, 65--12 SHAFT... 416 Stainless Steel O RINGS... Buna-N HARDWARE... 300 Series Stainless Steel LIFTING BAIL... 300 Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware - 300 Series Stainless CORD ENTRY... ft. (12.1m) Cord. Rigid quick change epoxy-potted housing POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED... 17, 11 or 870RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... White Iron Impeller, Seal Material, Impeller Trims, Cord Length MARKINGS... CSA WEIGHT... 1681 lbs (762 Kg) SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel Leg Kit C US LR16567 Series: 6SHV 75-100HP, 17RPM, 60Hz - 100HP, 11RPM, 60Hz 40 - HP, 870RPM, 60Hz Sample Specifi cations: Section Page F. This product may be covered by one or more of the following patents and other patent(s) pending: US Patent 7,931,473 & 8,128,360 DESCRIPTION: SUBMERSIBLE NON-CLOG PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. WARNING: CANCER AND REPRODUCTIVE HARM - WWW.P65WARNINGS.CA.GOV 3 11/18
Series 6SHVL www.cranepumps.com 21 Frame Driver inches (mm) 28 Frame Driver Optional Leg Kit - p/n 16 IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS 1 DIVISION 1 HAZARDOUS LOCATIONS. 4 3/18
Series 6SHVL 32 Frame Driver inches (mm) Optional Leg Kit - p/n 16 IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS 1 DIVISION 1 HAZARDOUS LOCATIONS. 5 3/18
Series 6SHVT www.cranepumps.com 28 Frame Driver inches (mm) 32 Frame Driver Optional Leg Kit - p/n 16B IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS 1 DIVISION 1 HAZARDOUS LOCATIONS. 6 3/18
Series 6SHVL 17RPM MODEL NO 6SHVL1N4 15.0 HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD SERVICE FACTOR SERVICE FACTOR 51.8 59.0 1.2 230 3 60 17 E 46.9 54.3 LOCKED ROTOR 206.6 DRIVER FRAME 21 CORD P/N CORD SIZE 1498 8/4-18/4 460 23.4 1.2 27.2 103.3 1497 12/4-18/4 6SHVL154 15.0 575 3 60 17 E 18.7 1.2 21.7 82.6 21 1497 12/4-18/4 6SHVL20064 20.0 3 60 17 G 63.0 1.2 74.6 323.0 28 138318 6/4-18/4 230.7 1.2 59.0 1498 8/4-18/4 6SHVL20084 20.0 3 60 17 J 383.9 21 460 26.9 1.2 29.9 1497 12/4-18/4 6SHVL20054 20.0 575 3 60 17 J 21.5 1.2 23.9 1.5 21 1497 12/4-18/4 77.8 1.2 93.4 6SHVL294.0 3 60 17 G 9.0 28 138319 2/4-18/4 230 71.4 1.2 82.3 6SHVL244.0 460 3 60 17 G 33.2 1.2 38.9 191.9 21 1499 8/4-18/4 6SHVL4.0 575 3 60 17 G 26.6 1.2 31.1 1.5 21 1497 12/4-18/4 6SHVL30094 30.0 93.4 1.2 116.9 3 60 17 E 230 82.3 1.2 98.7 9.0 28 138319 2/4-18/4 SHVL Pump 6SHVL30044 30.0 460 3 60 17 F 38.9 1.2.9 191.9 21 1499 8/4-18/4 6SHVL30054 30.0 575 3 60 17 F 31.1 1.2 36.7 1.5 21 1499 8/4-18/4 6SHVL40034 40.0 230 3 60 17 E 106.0 1.2 126.4 486.0 28 138319 2/4-18/4 6SHVL40044 40.0 460 3 60 17 E.0 1.2 63.2 243.0 28 138318 6/4-18/4 6SHVL40054 40.0 575 3 60 17 E 42.4 1.2.6 194.4 28 138317 8/4-18/4 6SHVL044.0 460 3 60 17 E 67.1 1.2 79.0 339.0 28 138318 6/4-18/4 6SHVL054.0 575 3 60 17 E.7 1.2 63.2 271.2 28 138318 6/4-18/4 6SHVL60044 60.0 460 3 60 17 E 79.0 1.2 95.5 339.0 28 138319 2/4-18/4 6SHVL60054 60.0 575 3 60 17 E 63.2 1.2 76.4 271.2 28 138318 6/4-18/4 6SHVL744 75.0 460 3 60 17 G 108.4 1.15 120.7 578.0 32 138319 2/4-18/4 6SHVL754 75.0 575 3 60 17 G 86.7 1.15 96.6 462.4 32 138319 2/4-18/4 6SHVL100044 100.0 460 3 60 17 E 136.6 1.15 1.3 578 32 138319 2/4-18/4 6SHVL100054 100.0 575 3 60 17 E 109.2 1.15 124.2 462.4 32 138319 2/4-18/4 IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - Feet, XJ - 75 Feet, or XL - 100 Feet. Cord sold separately. * Select impeller diameter when ordering. 7 5/18
Series 6SHVL 11RPM www.cranepumps.com MODEL NO 6SHVL75N6 7.5 HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD SERVICE FACTOR SERVICE FACTOR 24.9 1.2 29.6 230 3 60 11 J 24.0 1.2 27.6 LOCKED ROTOR 137.6 DRIVER FRAME 21 CORD P/N 1496 CORD SIZE 12/4-18/4 460 12.0 1.2 13.8 68.8 1497 6SHVL76 7.5 575 3 60 11 J 9.6 1.2 11.0.0 21 1497 12/4-18/4 6SHVL100N6 10.0 32.9 1.2 41.0 230 3 60 11 F 30.2 1.2.8 137.6 21 1498 8/4-18/4 460 15.1 1.2 17.9 68.8 1497 12/4-18/4 6SHVL10056 10.0 575 3 60 11 F 12.1 1.2 14.3.0 21 1497 12/4-18/4 6SHVL1N6 15.0 47.0 1.2 56.8 230 3 60 11 H 44.1 1.2 51.4 248.6 21 1498 8/4-18/4 460 22.0 1.2.7 124.3 1497 12/4-18/4 6SHVL156 15.0 575 3 60 11 H 17.6 1.2 20.6 99.4 21 1497 12/4-18/4 6SHVL20096 20.0 60.3 1.2 71.5 3 60 11 H 230 57.2 1.2 69.8 4.0 28 138318 6/4-18/4 6SHVL20046 20.0 460 3 60 11 E 28.6 1.2 34.9 124.3 21 1499 8/4-18/4 6SHVL20056 20.0 575 3 60 11 E 22.9 1.2 27.9 99.4 21 1497 12/4-18/4 6SHVL296.0 75.2 1.2 90.8 3 60 11 G 230 70.8 1.2 82.6 4.0 28 138319 2/4-18/4 6SHVL246.0 460 3 60 11 G.4 1.2 41.3 177.0 28 138317 8/4-18/4 6SHVL6.0 575 3 60 11 G 28.3 1.2 33.0 141.6 28 138317 8/4-18/4 6SHVL30096 30.0 90.8 1.2 114.9 3 60 11 E 230 82.6 1.2 99.7 4.0 28 138319 2/4-18/4 6SHVL30046 30.0 460 3 60 11 E 41.3 1.2 49.9 177.0 28 138317 8/4-18/4 6SHVL30056 30.0 575 3 60 11 E 33.0 1.2 39.9 141.6 28 138317 8/4-18/4 6SHVL40036 40.0 230 3 60 11 E 110.4 1.2 131.8 476.0 28 138319 2/4-18/4 6SHVL40046 40.0 460 3 60 11 E.2 1.2 65.9 238.0 28 138318 6/4-18/4 6SHVL40056 40.0 575 3 60 11 E 44.2 1.2 52.7 190.4 28 138317 8/4-18/4 SHVL Pump IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - Feet, XJ - 75 Feet, or XL - 100 Feet. Cord sold separately. 8 11/18
Series 6SHVT 11RPM MODEL NO HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD SERVICE FACTOR SERVICE FACTOR LOCKED ROTOR DRIVER FRAME 6SHVT046.0 460 3 60 11 H 76.4 1.15 84.0 400.0 32 138318 6/4-18/4 6SHVT056.0 575 3 60 11 H 61.2 1.15 67.2 320.0 32 138318 6/4-18/4 6SHVT60046 60.0 460 3 60 11 F 86.7 1.15 96.8 400.0 32 138319 2/4-18/4 6SHVT60056 60.0 575 3 60 11 F 69.4 1.15 77.4 320.0 32 138318 6/4-18/4 6SHVT746 75.0 460 3 60 11 H 109.3 1.15 119.5 612.0 32 138319 2/4-18/4 6SHVT756 75.0 575 3 60 11 H 87.4 1.15 95.6 489.6 32 138319 2/4-18/4 6SHVT100046 100.0 460 3 60 11 E 1.0 1.0 1.0 612.0 32 138319 2/4-18/4 6SHVT100056 100.0 575 3 60 11 E 108.0 1.0 108.0 489.6 32 138319 2/4-18/4 CORD P/N CORD SIZE 6SHVT20098 20.0 69.0 1.2 76.0 3 60 870 J 230 75.1 1.2 79.0 400.0 28 138318 6/4-18/4 6SHVT20048 20.0 460 3 60 870 J 37.6 1.2 41.1 200.0 28 138317 8/4-18/4 6SHVT20058 20.0 575 3 60 870 J 30.1 1.2 32.9 160.0 28 138317 8/4-18/4 6SHVT298.0 82.3 1.2 98.8 3 60 870 H 230 84.0 1.2 94.5 400.0 28 138319 2/4-18/4 6SHVT248.0 460 3 60 870 H 42.0 1.2 47.2 200.0 28 138317 8/4-18/4 6SHVT8.0 575 3 60 870 H 33.6 1.2 37.8 160.0 28 138317 8/4-18/4 6SHVT30098 30.0 98.8 1.2 124.1 3 60 870 F 230 94.5 1.2 108.6 400.0 28 138319 2/4-18/4 SHVT Pump 6SHVT30048 30.0 460 3 60 870 F 47.2 1.2 54.3 200.0 28 138317 8/4-18/4 6SHVT30058 30.0 575 3 60 870 F 37.8 1.2 43.5 160.0 28 138317 8/4-18/4 6SHVT40048 40.0 460 3 60 870 F 62.2 1.15 69.4 275.0 32 138318 6/4-18/4 6SHVT40058 40.0 575 3 60 870 F 49.8 1.15.5 220.0 32 138317 8/4-18/4 6SHVT048.0 460 3 60 870 D 74.5 1.15 84.9 275.0 32 138318 6/4-18/4 6SHVT058.0 575 3 60 870 D 59.0 1.15 67.4 220.0 32 138317 8/4-18/4 IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - Feet, XJ - 75 Feet, or XL - 100 Feet. Cord sold separately. * Select impeller diameter when ordering. 9 5/18
Series 6SHVL Performance Curve 15-100HP, 17RPM, 60Hz www.cranepumps.com STANDARD IMPELLER SIZES 190 180 170 160 1 330 mm 310 mm 290 mm Pump HP 100 75 60 40 30 20 15 Impeller Dia. mm (in.) 330 (12.99) 295 (11.61) 280 (11.02) 260 (10.24) 2 (9.) 210 (8.27) 200 (7.87) 190 (7.48) * 56.2 * Select impeller diameter when ordering 140 280 mm 130 120 260 mm 110 100 hp Head - ft 100 2 mm 90 80 210 mm 70 200 mm 75 hp 190 mm 60 60 hp 40 30 20 15 hp 20 hp hp 30 hp 40 hp hp 10 100 200 300 400 0 600 700 800 900 1000 1100 1200 1300 1400 10 1600 1700 US gpm 10 2/16
Series 6SHVL Performance Curve 7.5-40HP, 11RPM, 60Hz 6SHVL Pump 11 2/12
Series 6SHVT Performance Curve - 100HP, 11RPM, 60Hz www.cranepumps.com 160 1 140 5 mm 4 mm 15 STANDARD IMPELLER SIZES Pump HP 100 75 60 Impeller Dia. mm (in.) 365 (14.37) 340 (13.39) * * 130 415 mm 52 * Select impeller diameter when ordering 120 395 mm 54 110 375 mm 54.6 100 5 mm 54 Head - ft 90 340 mm 15 54.6 80 52 70 60 hp 60 hp 40 30 100 hp 75 hp 20 2 0 7 1000 12 10 17 2000 22 20 27 US gpm 12 2/16
Series 6SHVT Performance Curve 20 - HP, 870RPM, 60Hz STANDARD IMPELLER SIZES 85 80 75 5 mm 4 mm 415 mm Pump HP 40 30 20 Impeller Dia. mm (in.) 395 (15.) 375 (14.76) * * * * Select impeller diameter when ordering 70 395 mm.4 65 60 375 mm 57 56 5 mm Head - ft 340 mm 57 hp 40 20 hp 30 hp 20 hp 15 40 hp 30 hp 2 0 7 1000 12 10 17 2000 22 20 US gpm 13 2/16