FDO A0(A0) Fire Damper FDO in picture with flanges (available as an option) Halton FDO fire dampers are type-approved class A0(A0) fire dampers for use in marine and offshore ventilation systems. The FDO can be installed in circular ducts. All fire dampers have a fusible link and they prevent the spread of fire within the ventilation ductwork. When the blade is in the open position, the device does not cause significant pressure loss, noise or flow disturbance. Fire dampers are set from outside and can be installed in any position. An open-closed indicator is visible on the outside of the damper. Type-approved by most recognized classification societies, class A0 - A0 fire damper when suitably insulated Fixed frame of painted, galvanized or stainless steel. Blades stainless or galvanized steel. Flanges available as an option. Blade contains seals (effective up to 20 ºC) Nominal fuse release temperature 50 ºC, 4 ºC or 100 ºC. Other temperatures available. Very low leakage Automatic electrical, pneumatic or spring operation system available Maximum duct pressure for damper construction 5000 Pa and maximum air velocity 15 m/s PART MATERIAL FINISHIN Frame Carbon steel Painted or galvanised Frame Stainless steel EN 1.401 (AISI04), EN 1.4404 (AISI1L), EN 1.442 (AISI1L) - Blades Steel alvanized Blades Stainless steel EN 1.401 (AISI04), EN 1.4404 (AISI1L), EN 1.442 (AISI1L) - Maintenance-free bearings Stainless steel EN 1.4404 (AISI1L) - Shafts Stainless steel EN 1.4404 (AISI1L) - FDO - A0(A0) Fire Damper 5
I I I FDO DIMENSIONS AND MATERIAL THICKNESS FDO fire dampers meet international standards for circular ducts (Ø100-500 mm). Sizes Ø100 and Ø125 are not available of stainless steel. Sizes starting from Ø10 can be manufactured with 1 mm division. Flanges and drilling available as an option and according to ISO 151 standards. Special flanges and drilling available on request. Frame material thickness according to SOLAS. ENERAL FDO DRAWIN (without flanges) I T Alt. Position of the actuator A C F FDO DRAWIN (with flanges) H T E ØD Alt. position of the actuator Damper Blade A B F C H FDO - A0(A0) Fire Damper
FDO Dimensions without flanges (standard) FDO Dimensions with flanges (as an option) FDO-EL FDO-PNR FDO-SP Damper Inside Outside Material Housing Blade Elodrive CSQP Belimo Air Torque Air Torque Spring size dimensions dimensions thickness Lenght /Schischek BF AT50 AT100 Ø A C T F H I H I H I H I H I 100 100, 10, 200-150 200 115 200 145 215 15 215 150 115 125 125 1 4 200-150 200 115 200 145 215 15 215 150 115 10 10 1 200-150 200 115 200 145 215 15 215 150 115 200 200 20 20-150 200 115 200 145 215 15 215 150 115 250 250 25 20-150 200 115 200 145 215 15 215 150 115 15 15 21 20-150 200 115 200 145 215 15 215 150 115 400 400 40 4 20 4 150 200 115 200 145 215 15 215 150 115 500 500 50 4 20 9 150 200 115 200 145 215 15 215 150 115 FDO-EL FDO-PNR FDO-SP Damper Inside Bolt Outside Material Bolt Bolt holes Housing Blade Elodrive CSQP/ Belimo Air Torque Spring size dimensions circle dimensions thickness holes Qty Lenght Schischek BF AT 50 Ø A B C T D E F H I H I H I H I 100 100, 120 200,,5 4 20-150 200 115 200 15 105 150 115 125 125 150 225 4,5 4 20-150 200 115 200 15 105 150 115 10 10 15 20,5 4 20-150 200 115 200 15 105 150 115 200 200 225 00,5 4 2-150 200 115 200 15 105 150 115 250 250 20 50 12 4 2-150 200 115 200 15 105 150 115 15 15 55 415 12 2-150 200 115 200 15 105 150 115 400 400 450 500 12 2 40 150 200 115 200 15 105 150 115 500 500 50 00 12 12 2 90 150 200 115 200 15 105 150 115 VM09Y2015/Halton Marine reserves the right to alter products without notice. WEIHTS OF STANDARD HALTON MARINE FDO DAMPERS (K) without an actuator FDO weight without flanges FDO weight with flanges Size ØD (mm) K Size ØD (mm) K 100 4 125 5 10 4,5 200,5 250 9 15 12 400 1 500 22,5 100 5 125,5 10 200 9,5 250 11 15 14,5 400 1 500 22,5 Weights stated above do not include flanges or any actuator. Examples of actuator weights: FDO-EL CSQP +,5 kg, BF20 +,2 kg, BLF20 +1, kg, ExMax or RedMax or InMax +,5 kg, FDO-PNR AT100 (AISI) +,2 kg, AT50 (AISI) + kg, FDO-SP +1 kg. FDO - A0(A0) Fire Damper
FDO PRODUCT OPTIONS Halton FDO is available with following actuators: FDO-EL: Electrical spring return motor; standard actuators being 24 V or 20 V or 120 V. The motor contains built-in open-closed limit switches. Separate junction box included in the EL-model. A wide range of eex-proof actuators available, including a one second closing time function as an option. FDO-PNR: Pneumatic rotating actuator FDO-SP: Manual spring-actuated damper with fusible link DOT: manual override function available for PNR models. A wide range of accessories available. OPERATION PRINCIPLE In the event of a temperature rise in ductwork: FDO-EL: fusible link releases and cuts off operating voltage to the spring return motor, allowing the spring to close the damper blades. The fire damper opens automatically when the fuse has been changed and the operating voltage to the motor is re-established. FDO-PNR: fusible link releases and cuts off operating pressure to the spring return actuator, allowing springs to close the damper blades. The fire damper opens automatically when the fuse has been changed and the pneumatic air supply is re-established. FDO-SP: fusible link releases allowing the spring to close the damper blades. When the fuse has been changed, the fire damper must be reset into open position manually. FDO LEAKAE CLASS ACCORDIN TO STANDARD EN151 Size ØD (mm) Closed blade leakage Casing leakage 100 2 C 125 2 C 10 C 200 C 250 C 15 C 400 C 500 C FDO-EL WIRIN DIARAM with Elodrive CSQP FDO-EL WIRIN DIARAM with Belimo actuator POWER SUPPLY 120/20 V AC L N POWER SUPPLY 120 V AC DAMPER DAMPER CLOSED OPEN 4 L 1 14 N 4 5 4 5 2 1 9 10 11 9 10 11 (+) 1 14 (-) 4 4 5 9 10 11 4 5 9 10 11 2 1 S1 S2 S S4 S5 S 2 x 0,5 mm² x 0,5 mm² SIHF 2 x 0,5 mm² 14 1 FUSIBLE LINK x 0,5 mm² N T - L1 ~ + ELODRIVE CSQP-15A1E 15A2E 10A1E 10A2E 05A2E 05A2E IP SIHF 2 x 0,5 mm² 14 1 FUSIBLE LINK 4 C M S1 S2 S S4 S5 S 5 0 WHEN DAMPER IS NOT ENERIZED CONTACTS S1-S2, S4-S5 ARE CLOSED BELIMO BF24 BF20 BF120 BLF24 BLF20 IP 54 FDO - A0(A0) Fire Damper
FDO-EL WIRIN DIARAM with ExMax or RedMax actuator PE -EARTHIN RAIL x 0,5 mm² PE POWER SUPPLY 24-20V AC/DC L/+ N/- PE (PE) 4 4 5 9 10 11 12 1 14 15 4 5 9 10 11 12 1 14 15 BK Y BN 2 5 1 4 4 5 BK Y BN FUSIBLE LINK DAMPER DAMPER CLOSED OPEN 4 x 0,5 mm² x 0,5 mm² PE 2 5 1 4 4 5 HEATER 5 5 WHEN DAMPER IS NOT ENERIZED CONTACTS S1-S2, S4-S ARE CLOSED ExMax-15-SF RedMax-15-SF IP FDO-EL WIRIN DIARAM with InMax actuator SIHF 2 x 0,5 mm² 14 1 FUSIBLE LINK 50/4/100 C DAMPER DAMPER CLOSED OPEN 4 PE 4 PE 4 5 9 10 11 12 1 14 PE 4 5 9 10 11 12 1 14 PE 24-20 V AC/DC PE 1 14 ~ ~ 2 5 1 4 4 5 x 0,5 mm² x 0,5 mm² PE 2 5 1 4 4 HEATER 5 5 5 WHEN DAMPER IS NOT ENERIZED CONTACTS S1-S2, S4-S ARE CLOSED InMax-15-SF IP VM09Y2015/Halton Marine reserves the right to alter products without notice. FDO-PNR PNEUMATIC DIARAM ON BOX SE A (2 C) 4/100 C 0 4 OPTION: LIMIT SWITCHES SPRIN RETURN ACTUATOR SPEED CONTROLLER QUICK EXHAUST VALVES PIPELINES:POLYAMIDE FUSIBLE LINK VALVE PORT/2 WAY OPTION: MANUAL VALVE PORT/2 WAY OPTION: SOLENOID VALVE PORT/2 WAY PRESSURE REULATOR PNEU. INLET (5 - BAR) FOR A PLASTIC TUBE Ø MM CLOSED 21 1 1 OPEN 22 14 22 14 12 11 2 4 9 1 10 5 24/220 V 1. SPRIN RETURN VALVE 2. QUICK EXHAUST VALVE. SILENCER 4. FUSIBLE LINK VALVE 5. OPTION: SOLENOID VALVE. MALE CONNECTOR. DOUBLE NIPPLE. PLASTIC TUBE. OPTION: STAINLESS STEEL 9. OPTION: OPEN / CLOSED SWITCHES 10. OPTION: MANUAL VALVE 11. PRESSURE REULATOR 12. SPEED CONTROLLER 24...20 VAC/DC (+)(-) PE ~ ~ FDO - A0(A0) Fire Damper CLOSED AND OPENED INFORMATION OUT JUNCTION BOX ION BOX 9
FDO - A0(A0) Fire Damper 10