Series VENTS OVK. Low pressure axial fans in the steel casing with the air. for wall mounting.

Similar documents
Series VENTS OVK. Low pressure axial fans in the steel casing with the air. for wall mounting.

Series VENTS OVK. Low pressure axial fans in the steel casing with the air capacity up to m 3 /h for wall mounting

Series VENTS OVК. Axial fans of low pressure in steel case with the efficiency. wall-mounted assembly.

Series VENTS KSK. Centrifugal kitchen fan in sound-insulated casing with air flow up to 8138 m 3 /h

VENTS KSB K2. Series. Inline centrifugal fans in heat- and sound-insulated casing with air flow up to 7000 m 3 /h SOUND-INSULATED FANS

VENTS ТТ. Series. In-line mixed-flow fans in plastic casing with the air capacity up to 2350 m 3 /h. FANS FOR ROUND DUCTS

IN-LINE CENTRIFUGAL DUCT FANS VT Series

USER S MANUAL VENTS OV/ OVK/ OV1/ OV1 R/ OVK1/ VKF/ VKOM / OVP

SMOKE EXTRACTION VENTILATION FOR PARKING PREMISES

High efficiency low noise Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable

KV sileo 100 M. Circular duct fans. Circular duct fans

supplied in Form (B) configuration. Airflow over Impeller- Motor.

Axial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones.

Square Mixed Flow Fans (MFQ)

HXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance

Energy-saving motors (ESM)

CENTRIFUGAL IN-LINE FANS VENT Series

Vent-Axia Sabre Sickle Roof Fans (VSR)

Sabre Plate Mounted Sickle Fans (VSP)

Sabre Sickle Fan Assisted Roof Cowls (VSR)

PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance

VENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot

AXIAL FANS Axis / Tubo OPERATION MANUAL

Mixed Flow Roof Fans (RMH)

CHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT

THT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G

Circular Duct Fan prioair

Sentinel D-Box Single Fan

NCF fans 50 Hz. Protection class IP 55

Mixed Flow Roof Fans (RMH)

Sentinel D-Box Twin Fan

Eco Mixed Flow (emf) Energy Saver. Terminal Box. Performance. Quality Assurance. Impellers. Accessories. Motors

TSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJTSA: Ventilation units with a forward-curved impeller.

Axial or tubular wall-mounted fans, PL version fitted with a plastic rotor and AL version with an aluminium rotor.

DIRECT-AIR ILB / ILT Series Rectangular duct fans

Performance. Sound Levels. Impellers. Motors. Accessories

HIGH-POWERED VENTILATORS

Terminal Box Are to IP54, as standard, protected against dust and water from any angle allowing outside applications.

Single-inlet centrifugal fans

AC Commercial Fans Edition. ErP ready

CJBX CJBX/AL. Options. Order code CJBX 15/15 4. Technical characteristics

AXICIAT VA. Axial fans. Smoke extraction F200/120 and F400/120. High available pressure

Explanation of AR Series Ventilator Products. Fan type code D S AR AE

NCF fans 60Hz. Protection class IP 55

IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems

CBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts

Axial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.

V.I.R.T.U.O. Ventilation boxes. Comfort ventilation boxes

Device can be connected to pull air directly from ventilated room or air duct system. Not suitable for polluted air or volatile and explosive gases.

CONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series

CVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.

ACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box

IN-LINE DUCT FANS MIXVENT-TD Fan Systems

VKAP 100 MD/LD 3.0 Product version Motor power level (M higher power level, L lower power level) Diameter Product name. Guard grille.

CJBD/ALF CJBX/ALS CJBX/ALF CJBD/ALS VENTILATION UNITS WITH ALUMINIUM PROFILES. According EU Regulation

Plate mounted axial flow fans HXBR / HXTR Series

CSXRT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJSXR: Ventilation units with a backward-curved impeller

MODEL TD-MIXVENT INLINE MIXED FLOW DUCT FAN

AC Fans. AC Fans Overview 117. AC Axial Fans 118. AC Radial Fans 138. Technology. DC Axial Fans. DC Radial Fans. Specials. ACmaxx Axial Fans.

Centrifugal performance characteristics with axial flow pattern: RADAX VAR

EDM Series EDM-80N EDM-80L EDM-100 EDM-200 AXIAL BATHROOM FANS. Bathroom extract fans EDM

NCF 60 Hz. Protection class IP 55

IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series

CMR/EW EFFICIENT WORK

TECHNICAL DOCUMENTATION WOLF AIR HEATERS LH-EC / LH. 30m 3 /h

BATHROOM EXTRACT FANS DECOR-100 Series

EDM-80N EDM-80L EDM-100 EDM-200. Installation examples. Extract ventilation through short duc

AC centrifugal fan. forward curved, dual inlet with housing (flange)

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401

Device can only be used indoors. Not suitable for polluted air or volatile and explosive gases. Single phase speed controller.

Model METRIC SHAFT WT (LBS) mm mm mm mm mm mm mm 572

CRH RANGE - TECHNICAL DATA CENTRIFUGAL ROOF FANS

Medium Pressure Centrifugal Fans

Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECHNICAL DATA 500

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401

Series TDA DIRECT DRIVEN MODEL: TDA- 450/9AA/8-8/ / Construction. Airflow Direction

Multifunctional 400ºC/2h and 300ºC/2h roof fans

Heat recovery ventilators with rotating exchanger, automatic control and EC motor, designed for vertical ducts and installation in technical room

CBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.

VKA/VKAS. Circular duct fans CIRCULAR DUCT FANS

Dynamically-balanced impellers with extremely robust cores CMP T 5.5

Thermo fans. Systemair range Systemair thermo fans are available in three different executions. The Multibox MUB-K ASF/KB. Flexible connection

HCH-HCT/EW EFFICIENT WORK. Wall-mounted or long-cased axial fans fitted with high-efficiency IE3 asynchronous motor adjustable electronically.

MegaBox Product-specific information

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 BEARINGS 303

Fire Dampers. Types FKA FRL FRK 4/1/EN/1

400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet

AXIAL FANS Catalogue CN0050C01 May 2008

CMP/EW EFFICIENT WORK

400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity

ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301 BEARINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING TECHNICAL DATA 500

IN-LINE CENTRIFUGAL FANS FOR INDUSTRIAL / COMMERCIAL USE

CAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power

ACOUSTIC CABINET FANS CVAB / CVAT Series

VORTICENT C E RANGE Centrifugal fans

ACOUSTIC CABINET FANS CVB / CVT Series

High-efficiency long-cased axial fans fitted industrial Brushless motor E.C. Fibreglass-reinforced plastic impeller.

Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE RIGHT PERFORMANCE CURVE RIGHT

Acoustic Twin Fans (ATQ)

Transcription:

AXIAL FANS Series Series K Series VENTS Low pressure axial fans in the steel casing with the air capacity up to 11900 m 3 /h for wall mounting. Low pressure axial fans in the steel casing with the air capacity up to 11900 m 3 /h for wall mounting. Low pressure axial fans in the steel casing with the air capacity up to 11900 m 3 /h for vent duct mounting. Applications Combined supply and exhaust ventilation systems for various premises where high air capacity at relatively low system resistance is required. OV and OVK fans can be used for the direct air exhaust or pressurization in smoke ventilation systems. OV and OVK fan are suitable for outdoor wall mounting. Design The fan casing and the impeller are made of steel with polymeric coating. OV and OVK fan terminal box is equipped with the cord for remote connection. fan is fitted with the external terminal box mounted on the fan casing. Motor The impellers are powered by two- or three-pole, single- or three-phase asynchronous motors with external rotor and built-in thermal overheating protection depending on the model. Ball bearings in the motor provide long service life designed for at least 40 000 hours. Motor protection rating IP 44. Speed control Both smooth or step speed control is performed by means of the thymistor or autotransformer controller. Several fans can be connected to one controller if the total power and operating current do not exceed the rated controller values. Mounting Fan is installed on the wall surface by means of a square (OV series) or round (OVK series) mounting plate. fan is installed into the duct by means of connecting flanges. The fan is powered through the external remote terminal box. Power supply and installation shall be performed in compliance with the manual and wiring diagram on the terminal box. Designation key: Series and modification with a square mounting plate K with a round mounting plate VENTS for mounting into a vent duct Motor modification Number of poles Phase 2 4 6 E single phase D three phases Dimension type 200; 250; 300; 350; 400; 450; 500; 550; 630 Accessories page 0 page 0 page 0 page 0 page 0 page 0 144

WWW.VENTILATION-SYSTEM.COM 2Е 300 2D 300 4Е 300 4D 300 4Е 350 Voltage [V / 50 Hz] 230 400 230 400 230 Power [W] 145 145 75 75 140 Current [A] 0,66 0,25 0,35 0,22 0,65 Maximum air flow [m 3 /h] 2230 2310 1340 1310 2500 RPM [min -1 ] 2300 2350 1350 1380 1380 Noise level at 3 m [dba] 60 60 58 58 62 Maximum operating temperature [ о C] -30 +60-30 +60-30 +60-30 +60-30 +60 ( IP X4) 4D 350 ( IP X4) 4Е 400 ( IP X4) 4D 400 ( IP X4) 4Е 450 ( IP X4) 4D 450 Voltage [V / 50 Hz] 400 230 400 230 400 Power [W] 140 180 180 250 250 Current [A] 0,38 0,82 0,47 1,2 0,6 Maximum air flow [m 3 /h] 2520 3580 3740 4680 5280 RPM [min -1 ] 1380 1380 1380 1350 1360 Noise level at 3 m [dba] 62 63 64 64 65 Maximum operating temperature [ о C] -30 +60-30 +60-30 +60-30 +60-30 +60 ( IP X4) 4Е 500 ( IP X4) 4Е 550 ( IP X4) OV 4D 550 ( IP X4) 4Е 630 ( IP X4) OV 6Е 630 Voltage [V / 50 Hz] 230 230 3~ 400 230 1~ 230 Power [W] 420 550 750 750 540 Current [A] 1,95 2,55 1,5 3,5 2,4 Maximum air flow [m 3 /h] 7060 8800 9700 11900 10900 RPM [min -1 ] 1300 1300 1350 1360 850 Noise level at 3 m [dba] 69 70 73 75 72 Maximum operating temperature [ о C] -30 +60-30 +60-30 +60-30 +60-40 +70 2Е 200 ( IP X4) 2Е 250 ( IP X4) 2D 250 IP 54 4Е 250 ( IP X4) 4D 250 Voltage [V / 50 Hz] 230 230 400 230 400 Power [W] 55 80 80 50 60 Current [A] 0,26 0,4 0,22 0,22 0,17 Maximum air flow [m 3 /h] 860 1050 1060 800 850 RPM [min -1 ] 2300 2400 2600 1380 1400 Noise level at 3 m [dba] 50 60 60 55 55 Maximum operating temperature [ о C] -30 +60-30 +60-30 +60-30 +60-30 +60 ( IP X4) ( IP X4) ( IP X4) ( IP X4) ( IP X4) IP 54 VENTS ОVK VENTS FAN SERIES VENTS. Industrial and commercial ventilation 02-2012 145

AXIAL FANS Fan overall dimensions: Dimensions [mm] Type D d B B1 L Mass [kg] OV 2Е 200 210 7 312 260 145 3,0 OV 2Е 250 260 7 370 320 155 4,0 OV 2D 250 260 7 370 320 155 4,0 OV 4Е 250 260 7 370 320 155 3,5 OV 4D 250 260 7 370 320 155 3,5 OV 2Е 300 326 9 430 380 195 6,1 OV 2D 300 326 9 430 380 155 5,4 OV 4Е 300 326 9 430 380 195 5,0 OV 4D 300 326 9 430 380 155 5,4 OV 4Е 350 388 9 485 435 200 7,8 OV 4D 350 388 9 485 435 200 7,8 OV 4Е 400 417 9 540 490 240 8,8 OV 4D 400 417 9 540 490 240 8,8 OV 4Е 450 465 11 576 535 250 10,5 OV 4D 450 465 11 576 535 250 10,5 OV 4Е 500 520 11 655 615 260 14,0 OV 4Е 550 570 11 725 675 280 16,5 OV 4D 550 580 11 725 675 260 16,5 OV 4Е 630 650 11 800 710 295 20,0 OV 6Е 630 650 11 800 710 295 20,0 Fan overall dimensions: Dimensions [mm] Type D D1 D2 d L Mass [kg] ОVK 2Е 200 210 250 280 7 145 2,8 ОVK 2Е 250 260 295 320 7 155 3,8 ОVK 2D 250 260 295 320 7 155 3,8 ОVK 4Е 250 260 295 320 7 155 3,4 ОVK 4D 250 260 295 320 7 155 3,4 ОVK 2Е 300 326 380 397 9 195 5,9 ОVK 2D 300 326 380 397 9 155 5,1 ОVK 4Е 300 326 380 397 9 195 5,0 ОVK 4D 300 326 380 397 9 155 5,1 ОVK 4Е 350 388 442 460 9 200 7,5 ОVK 4D 350 388 442 460 9 200 7,5 ОVK 4Е 400 417 504 528 9 240 8,5 ОVK 4D 400 417 504 528 9 240 8,5 ОVK 4Е 450 465 578 607 11 250 10,0 ОVK 4D 450 465 578 607 11 250 10,0 ОVK 4Е 500 520 590 655 11 260 14,0 ОVK 4Е 550 570 645 710 11 280 16,5 ОVK 4Е 630 650 760 800 11 295 20,0 Fan overall dimensions: Dimensions [mm] Type D D1 D2 d B L Mass [kg] 2Е 200 205 250 280 7 290 120 3,1 2Е 250 260 295 320 7 340 150 4,0 2D 250 260 295 320 7 340 150 4,0 4Е 250 260 295 320 7 340 150 4,1 4D 250 260 295 320 7 340 150 4,1 2Е 300 310 380 397 9 420 160 6,5 2D 300 310 380 397 9 420 160 6,0 4Е 300 310 380 397 9 420 160 6,5 4D 300 310 380 397 9 420 160 6,0 4Е 350 362 442 460 9 480 160 8,1 4D 350 362 442 460 9 480 160 8,1 4Е 400 412 504 528 9 550 170 9,1 4D 400 412 504 528 9 550 170 9,1 4Е 450 462 578 607 11 630 200 10,6 4D 450 462 578 607 11 630 200 10,6 4Е 500 515 600 650 11 635 220 12,8 4Е 550 565 650 700 13 685 230 15,5 4Е 630 645 740 790 13 780 230 18,5 OV ОVK 146 VENTS. Industrial and commercial ventilation 02-2012

WWW.VENTILATION-SYSTEM.COM VENTS VENTS 2Е 250 L wa to environment dba 76 68 66 68 70 68 68 63 58 LwA to environment dba 65 56 58 58 57 59 55 51 45 VENTS 4Е 250 L wa to environment dba 60 52 50 52 53 52 52 44 43 VENTS VENTS ОVK VENTS FAN SERIES 2Е 300 L wa to environment dba 78 72 72 70 72 70 69 63 63 4Е 350 L wa to environment dba 70 61 62 64 63 63 58 56 52 4Е 300 L wa to environment dba 67 58 57 59 57 58 53 52 49 4Е 400 L wa to environment dba 75 66 68 66 69 67 65 61 56 VENTS. Industrial and commercial ventilation 02-2012 147

AXIAL FANS VENTS VENTS 4Е 450 LwA to environment dba 77 69 70 73 73 71 67 67 61 4Е 500 LwA to environment dba 80 71 73 72 74 73 70 67 63 4Е 550 L wa to environment dba 83 73 75 73 75 74 72 66 63 4Е 630 L wa to environment dba 77 71 73 72 73 71 70 63 59 VENTS VENTS 2D 250 LwA to environment dba 77 67 68 70 69 68 66 60 57 4D 250 L wa to environment dba 60 49 50 53 54 53 52 45 42 2D 300 L wa to environment dba 80 72 71 71 74 70 69 65 63 4D 300 L wa to environment dba 63 58 55 58 56 58 57 52 48 148 VENTS. Industrial and commercial ventilation 02-2012

WWW.VENTILATION-SYSTEM.COM VENTS VENTS 4D 350 LwA to environment dba 72 62 61 64 64 61 61 56 54 4D 450 L wa to environment dba 76 65 68 69 69 70 64 60 57 4D 400 ОV 4D 550 L wa to environment dba 75 65 66 69 66 67 64 60 55 L wa to environment dba 84 75 79 72 76 71 77 69 68 VENTS ОVK VENTS FAN SERIES OV fan boiler room ventilation example. OV 6Е 630 L wa to environment dba 75 51 56 61 65 67 66 60 54 VFK series fan installation into the vent duct by means of flanges. VENTS. Industrial and commercial ventilation 02-2012 149