JCB ATTACHMENTS FOR MIDRANGE MACHINES

JCB ATTACHMENTS FOR MIDRANGE MACHINES

WHAT IS A GENUINE ATTACHMENT? Fits the machine Optimum Value for money Stock After COMPLETING THE SOLUTION By specifying a Genuine Attachment your customer can be assured that every attachment will: Be a perfect match to the carrier machine Every product in the JCB Attachments range is fully approved and will perform at it s most efficient when partnered with a JCB machine. You can be sure when specifying a JCB Attachment that it will ensure that the machine will operate at its optimum performance. 1 JCB MIDRANGE ATTACHMENTS Issue 1

Performance Machine warranty OK Fit for purpose sales Own warranty Be supported by a World Class Team The fitment of an approved Attachment to a machine gives the customer complete peace of mind that both the JCB machine and attachment are fully backed by a seamless JCB warranty package supported by the JCB dealer network. Maximise machine utilisation By partnering the machine with a range of attachments it will maximise its utilisation, creating a greater return their investment. JCB MIDRANGE ATTACHMENTS Issue 1 2

JCB ATTACHMENTS SALES GUIDE Welcome Welcome to the new JCB Attachments Sales Guide, this book provides information on the JCB range of attachments including part numbers, specifications and selling information. The aim of this book is to help you to guide customers towards the purchase of Genuine JCB Attachments enabling them to complete their work efficiently and safely. The Contents Section lists the products with the relevant page numbers; other useful information includes density ratings, conversion factors, material weights, carriage pick up dimensions and industrial fork classifications. Where applicable further information on Sweeper Collectors, Earth Drills, Dipper Mounted Hammers and Handheld Equipment are included as separate sections. A number of JCB machines now offer carriage options allowing attachments to be further utilised over a wider range of carrier machines, please take into consideration the lift capacity of the carrier machine when specifying any attachment. JCB reserves the right to change specifications without notice. Illustrations shown are representative only and may include optional equipment and accessories. Whilst every effort has been taken to ensure that all the information provided is accurate, the reader should always be considerate of safety when selecting attachments for specific machines and applications. If in doubt please contact JCB Attachments, contact details on the back page. 3 JCB MIDRANGE ATTACHMENTS Issue 1

CONTENTS Products Backhoe Compact Loadall Loadall, Telemasters & RTFL s WLS Sweeper Collectors Earthdrills Hammers Handheld Tools Section A B C D E F G H JCB MIDRANGE ATTACHMENTS Issue 1 4

SHOVEL DENSITY RATINGS Introduction The amount of material a shovel can hold in relation to capacity of the shovel and the material density; a figure that will help to determine which shovel to use for a particular material. A density rating of 100kg/m 3 means that the density of the material to be handled can be maximum of 100kg/m 3 for the loader-shovel combination being used. Density rating is calculated by dividing the loader s operating capacity by the shovel capacity. 1. To determine the correct sized shovel for the machine and application you need to carry out the loading calculation. This will ensure safe machine operation. 2. To do this determine the material being used and from the table on the next page use the listed material density (kg/m 3 ). 3. Multiply the required capacity of the shovel by the material density to get an overall mass of material. Add weight of shovel to that mass to get a total operating mass. 4. Ensure that the mass is within the recommended quantity capacity or SWL of machine. Example 60'' GP Shovel. Heaped capacity = 0.37m 3 Loading dry loose gravel with a material density of approximately 1602 kg/m 3 1602 kg/m 3 x 0.37m 3 = 593kg + weight of the shovel or earth/sand/gravel density = 1750 kg/m 3 1750kg/m 3 x 0.37m 3 = 647.5kg + weight of the shovel This shovel is matched to the material density and the capacity of a 165 Robot Loader Recommended Operating Capacity = 650kg For lighter materials larger shovels can be used See Material Weights for material density rating 5 JCB MIDRANGE ATTACHMENTS Issue 1

CONVERSION FACTORS from to multiply by Length mm in 0.039 37 m ft 3.280 8 m yd 1.093 6 km mile 0.6214 Area mm 2 in 2 0.001 550 cm 2 in 2 0.155 0 m 2 in 2 1 549 m 2 ft 2 10.764 m 2 yd 2 1.196 km 2 mile 2 0.386 1 ha acre 2.471 Volume mm 3 in 3 0.000 061 02 cm 3 in 3 0.061 02 cm 3 litre 0.001 00 m 3 ft 3 35.32 m 3 yd 3 1.308 litre in 3 61.01 litre m 3 0.001 00 litre UK gal 0.220 litre UK pt 1.760 US gal UK gal 0.832 7 in mm 25.40 ft m 0.304 8 yd m 1.914 4 mile km 1.609 in 2 mm 2 645.2 in 2 cm 2 6.452 in 2 m 2 0.000 645 2 ft 2 m 2 0.092 903 yd 2 m 2 0.8361 mile km 2 2.590 acre ha 0.404 7 in 3 mm 3 16 390 in 3 cm 3 16.39 litre cm 3 1 000 ft 3 m 3 0.028 32 yd 3 m 3 0.764 6 in 3 litre 0.016 39 m 3 litre 1 000 UK gal litre 4.546 UK pt litre 0.568 3 UK gal US gal 1.201 0 from to multiply by Mass (weight) g oz 0.035 27 g lb 0.002 205 kg lb 2.205 tonne ton 0.984 2 Density kg/m 3 lb/yd 3 1.686 Force N lbf 0.224 8 N kgf 0.102 0 Pressure bar psi 14.50 bar Pa 100 000 kg/cm 2 psi 14.22 kg/cm 2 bar 0.980 7 Force Nm lbf ft 0.737 6 kgf m lbf ft 7.233 Power kw hp 1.341 CV,PS hp 0.986 3 kw Btu 3 412 oz g 28.35 lb g 453.6 lb kg 0.453 6 ton tonne 1.016 lb/yd 3 kg/m 3 0.593 3 lbf N 4.448 kgf N 9.807 psi bar 0.068 95 Pa bar 0.000 0100 psi kg/cm 2 0.070 32 bar kg/cm 2 1.020 lbf ft Nm 1.356 lbf ft kgf m 0.138 3 hp kw 0.745 7 hp CV, PS 1.014 Btu kw 0.000 293 1 JCB MIDRANGE ATTACHMENTS Issue 1 6

MATERIAL WEIGHTS Material kg/m 3 Ashes soft coal w/clinkers 560-835 soft coal ordinary 640-720 Barley 625 Bauxite 2550 Beans shelled 770 Bone meal 915 Bones crushed 595 Brewers grain dry 450 wet 910 Cement (Portland) 1500 Chalk crushed 1400 Charcoal (Oak) 560 Chips pulpwood 290 Clay damp 1760 dry excavated 1010 Clay & gravel dry 1602 wet 1760 Clay brick or tile (hard) 2050 Coal 640-930 Cocoa beans 640 Coffee beans 640-720 Coke lump loose 510 Concrete 1380-1780 Copper ore 4200 Copra 350 Corn dry shelled 720 Cotton seed dry 400 Cullet 1280-1600 Earth dry, loose 1220 wet, packed 1850 Earth sand gravel 1600-1900 Fertiliser potash 1090 urea 720 Flax seed 720 Granite 2650 Gravel dry loose 1450-1690 wet, sand & gravel 2020 Gypsum 2550 Hay straw bales 320 Ice crushed 600 Limestone 2480 loose crushed 1540-1600 marble 2720 Lye 1700 Malt dry 720 Marble loose 1540 Oats 420 Ore 1700-2450 Paper 930 Peanuts shelled 280 7 JCB MIDRANGE ATTACHMENTS Issue 1

MATERIAL WEIGHTS Material kg/m 3 Peas dry 770 Phosphate granular 720 rock 1440 Potash 1090 Potatoes 700 Quartz granular 2650 Rye 720 Rice 710 Riprap 1250 Rubber scrap 800 Salt 2160 coarse 560 fine 770 Sand dry 1440-1680 wet 2020 Sand & gravel dry loose 1440-1680 wet 2020 Sand foundry 1520 Silica dry 1520 Sandstone 2290 Sewage sludge 960 Shale 1470 Slag (iron) 2750 Slate 2750 Snow fresh 80-200 wet 240-800 Soda ash light 450 dense 960 Sodium aluminate ground 1150 Soy beans 740 Starch 1540 Steel chips uncrushed 400-1360 crushed 1280-2400 Sugar beet pulp wet 560 dry 200 Sugar cane knifed 270 unknifed 370 Sugar raw 1590 Sulphur lumpy 1330 powdered 880 Sunflowers 400 Talc 880 Taconite 1440-1710 Wheat 770 Wood cedar 350 chips 290 oak 865 pine Norway 550 sawdust 240-320 Zinc ore 4050 crushed 2560 Zinc oxide 370 JCB MIDRANGE ATTACHMENTS Issue 1 8

LOADALL CARRIAGES Blank attachment location brackets are available from JCB Service to allow non-jcb attachments to be converted for use with Loadall machines. It is strongly recommended that these brackets are used where possible. Three types of carriage used on Loadall machines are shown below. Compact Tool Carrier Used on 520-40, 520-50, 524-50, 525-50 & 527-55 machines Compact Tool Carrier Dimensions 71 600 (max) 530 (min) 248.2 26.3 44.5 Blank Location Bracket Part No: 980/88043 (Part Number is for two brackets) All dimensions in millimetres 9 JCB MIDRANGE ATTACHMENTS Issue 1

LOADALL CARRIAGES Tool Carrier Used on 520-55, 520S, 526-55 & 526S machines Tool Carrier Dimensions 29.5 552 (max) 480 449 (min) 95 34 to 35 Blank Location Bracket Part No: 980/44700 (Part Number is for two brackets) Q fit Used on all other Loadall machines 58.5 1079 (max) 630 995 (min) 35 12 Blank Location Bracket Part No: 980/88042 (Part Number is for two brackets) JCB MIDRANGE ATTACHMENTS Issue 1 10

LOADALL CARRIAGES This diagram illustrates the fitting of a Sideshift to a Loadall. The order of fitting is the same for other machines. The Sideshift is attached to the fork frame similar to a standard fork fitment. Once the Sideshift is fitted then the forks are fitted to the Sideshift as the original fork frame. Quickhitch Fork Frame Sideshift Forks Industrial Carriage only Designed to give precise loading/unloading Gives 150mm (6 in.) of movement either side of the machine centreline. Industrial Fork Classifications Mounting class Lift truck capacity P (mm) Q (mm) at load centre (kg) 1A up to 999 at 500mm 331 76 1B 331 114 2A 1000 to 2500 at 500mm 407 76 2B 407 152 3A 2501 to 4999 at 500mm 508 76 3B 508 203 4A 5000 to 8000 at 600mm 635 127 4B 635 254 5A 8001 to 10099 at 600mm 728 127 5B 728 257 11 JCB MIDRANGE ATTACHMENTS Issue 1

BUCKET PIN CHART A ØC B Machine Dimension Dimension Dimension Model A B C 2CX & MIDI CX 231.5 164 32 3CX 343 175 45 4CX 343 175 45 JCB MIDRANGE ATTACHMENTS Issue 1 12

2CX Manual Quickhitch A Provides greater safety and less effort for the operator to change buckets and attachments Durable design, with harden steel jaws that keep wear to a minimum Mechanically operated with spring loaded lock released by use of a tommy bar. The safety lock pin prevents accidental loss of bucket or attachment Part Number Type of Quickhitch Weight (kg) 980/A4618 Manual 55 GP Bucket GP Buckets are available in a variety of widths to increase machine versatility A rolled top section increases structural integrity Side plate reinforcement offers additional strength and rigidity Replaceable wearparts increase durability and extend the working life Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 531/99300 9 230 0-028 Standard Standard 52 528/00400 12 300 0-028 Standard Standard 55 528/00600 14 350 0-037 Standard Standard 57 528/00800 16 400 0-046 Standard Standard 63 528/01000 18 450 0-053 Standard Standard 68 528/01200 24 600 0-079 Standard Standard 87 528/01400 30 750 0-104 Standard Standard 101 Optional weld in bucket pins 980/86024 are available on ALL the above Buckets JCB MIDRANGE ATTACHMENTS Issue 1 A.1

A 2CX Ditch Maintenance Bucket Side plate reinforcement offers additional strength and rigidity Drainage holes reduce weight/density during operation Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 980/05400 47 1200 0.12 Standard N/A 116 Optional weld in bucket pins 980/86024 are available GP Shovel Designed for maximum performance and durability Teeth and toeplate options for even longer service life Available as Direct Mount or Quick Hitch option Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 335/03553* 54 1372 0.6 Standard N/A 344 335/03554* 72 1850 0.6 Standard N/A 365 335/03590* 78 2000 0.7 Standard N/A 401 528/02600** 54 1372 0.8 Standard N/A 296 528/02800** 72 1850 0.6 Standard N/A 260 528/03000*** 54 1372 0.8 Standard N/A 288 528/01600*** 72 1850 0.6 Standard N/A 283 528/02900*** 76 1950 0.7 Standard N/A 326 * Direct Mount suits Mk111 ** Direct Mount suits Mk11 *** Quickhitch Mount suits Mk11 A.2 JCB MIDRANGE ATTACHMENTS Issue 1

2CX 6 in 1 Shovel Please ensure the Loader Quickhitch fitment (MkII or MkIII) is determined before ordering the shovels below A Maximises loader productivity giving the operator a wider choice of options The options are dozing, loading, digging, grabbing, spreading and grading Teeth and toeplate options for even longer service life Available as Direct Mount or Quick Hitch option Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 128/12142* 72 1850 0.6 Standard N/A 457 528/00100** 72 1850 0.6 Standard N/A 419 528/04800** 83 2110 0.7 Standard N/A 500 980/70700*** 54 1372 0.4 Standard N/A 382 528/02700*** 72 1850 0.6 Standard N/A 448 * Direct Mount suits Mk111 ** Quickhitch Mount suits Mk11 *** Direct Mount suits Mk11 Side Tip Shovel Designed for safe and accurate placement of infill materials Available as LH or RH options Airmaster machine must be fitted with a counterweight 335/07513 Available as Direct Mount or Quickhitch option Part Number Width Width Capacity Duty Left Hand/ Weight (in) (mm) (m 3 ) Right Hand (kg) 980/90165* 73 1850 0.62 Standard Left Hand 500 980/90166* 73 1850 0.62 Standard Right Hand 500 980/89812* 79 2000 0.67 Standard Right Hand 520 980/89811* 79 2000 0.67 Standard Left Hand 520 980/88955** 73 1850 0.62 Standard Right Hand 499 980/84105** 73 1850 0.62 Standard Left Hand 499 980/88255*** 77 1950 0.65 Standard Left Hand 510 980/62800*** 77 1950 0.65 Standard Right Hand 503 * Direct Mount suits Mk111 ** Quickhitch Mount suits Mk11 *** Direct Mount suits Mk11 JCB MIDRANGE ATTACHMENTS Issue 1 A.3

A 2CX Earth Drill For accurate and precise drilling Standard 2" Hexagon drive Maximum torque drilling power 6000Nm Choice of standard or heavy duty flights. Replacement teeth and pilot bits available for greater service life Part Number Maximum recommended standard Flight 980/A4327 1200mm (47 ) length, 900mm (36 ) diameter* * See section F for details of flights Compactor For trench reinstatement and general ground compaction Dipper mounting ensures the operator is fully protected from the effects of vibration Connects to the high flow circuit, the unit only requires 24 lpm In built protection valve safeguards the unit from hydraulic pressure surges Suitable for direct or quickhitch mount Part Number Width Length Frequency Centrifugal Force Weight (mm) (mm) (kg) 980/03200 305 739 33.3Hz @ 2000 rev/min 16.3kN @ 33.3HZ 172 A.4 JCB MIDRANGE ATTACHMENTS Issue 1

2CX Kerbmaster A The safe and simple way of manipulating kerbstones up to 180kgs in weight Incorporates hose burst check valve for failsafe operation Wearparts give good gripping properties without damage to the kerbstone Manual rotation offers line man total control of kerb alignment Maximum grab opening 170mm Part Number Description 980/A0724 Manual Rotation Kerb Grab 980/90862 Kerb Grab installation kit required Industrial Forks Enables the machine to be utilised for loading and stacking. Forks rated to 2 tonnes. (Lift governed by machine lift capacity). Load Guard offers greater operator safety. Part Number Length (in) Length (mm) Class Type 335/04008 54 1370 2 Fork Frame* 528/05100 54 1370 2 Fork Frame** 980/14300 47 1200 2B Industrial Fork 547/08500 47 1200 2B Industrial Fork 547/02500 42 1067 2B Industrial Fork * MKII Hitch Pick Up ** MKIII Hitch Pick Up JCB MIDRANGE ATTACHMENTS Issue 1 A.5

A 2CX Sweeper Collector Heavy duty canopy gives added strength to take the knocks of every day use Floating frame system automatically follows the ground contour ensuring sweeper output Large diameter steel and polypropylene brush segments for superior finish Sweeping and hopper emptying hydraulically operated from the cab Available with dust suppression and/or gutter brush options Part Number Width (in) Width (mm) Capacity (Litres) Type Integral Tank 980/90515 82 2100 270 SC210 No 980/90516 82 2100 270 SC210 Yes For additional information on Sweeper Collectors, see section E Hammermaster For utility work, building, construction and groundcare Durable solid body design Sealed for life accumulator Excellent power to weight ratio provides maximum performance Includes moil and chisel Part Number Hammermaster Tool Diameter (mm) Operating Weight (kg) 980/90241 HM265Q 65 200 * See section G for details A.6 JCB MIDRANGE ATTACHMENTS Issue 1

MIDI CX Manual Quickhitch A Provides greater safety and less effort for the operator to change buckets and attachments Durable design, with harden steel jaws that keep wear to a minimum Mechanically operated with spring loaded lock released by use of a tommy bar. The safety lock pin prevents accidental loss of bucket or attachment Part Number Type of Quickhitch Weight (kg) 980/A4618 Manual 55 GP Bucket GP Buckets are available in a variety of widths to increase machine versatility A rolled top section increases structural integrity Sideplate reinforcement offers additional strength and rigidity Replaceable wearparts increase durability and extend the working life Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 531/99300 9 230 0-028 Standard Standard 52 528/00400 12 300 0-028 Standard Standard 55 528/00600 14 350 0-037 Standard Standard 57 528/00800 16 400 0-046 Standard Standard 63 528/01000 18 450 0-053 Standard Standard 68 528/01200 24 600 0-079 Standard Standard 87 528/01400 30 750 0-104 Standard Standard 101 JCB MIDRANGE ATTACHMENTS Issue 1 A.7

A MIDI CX Ditch Maintenance Bucket Side plate reinforcement offers additional strength and rigidity Drainage holes reduce weight/density during operation Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 980/05400 47 1200 0.12 Standard N/A 116 Optional weld in bucket pins 980/86024 are available GP Shovel Designed for maximum performance and durability Teeth and toeplate options for even longer service life Quickhitch mount for rapid changeover times, increases productivity Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 331/12904 56 1430 0.30 General Purpose Standard 156 512/03500 62 1550 0.37 General Purpose Standard 160 512/07400 62 1550 0.57 GP Utility Shovel Standard 254 A.8 JCB MIDRANGE ATTACHMENTS Issue 1

MIDI CX 6 in 1 Shovel A Maximises loader productivity giving the operator a wider choice of options The options are dozing, loading, digging, grabbing, spreading and grading Teeth and toeplate options for even longer service life Quickhitch mount for rapid changeover times increases productivity Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 512/04400 62 1550 0.30 Standard Standard 348 243/20193 69 1750 0.41 Standard Standard 389 Side Tip Shovel Designed for safe and accurate placement of infill materials Available as LH or RH options Designed to operate from the loader auxiliary service Allows the operator to face the traffic and reduces potential traffic hazards Quickhitch mount for rapid changeover times increases productivity Part Number Width Width Capacity Duty Description Weight (in) (mm) (m 3 ) (kg) 980/78100 63 1600 0.39 Standard Right Hand 335 980/78200 63 1600 0.39 Standard Left Hand 335 JCB MIDRANGE ATTACHMENTS Issue 1 A.9

A MIDI CX Construction Shovel Designed for heavy duty applications Quickhitch mount for rapid changeover times increases productivity Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 980/88002 62 1550 0.39 Heavy Duty N/A 250 980/88077 69 1750 0.44 Heavy Duty N/A 265 Low Back Shovel Designed for the operator to work with greater safety The lower back and longer base enables the operator to see the front edge of the toeplate during operation Teeth or bolt on toeplate options Quickhitch mount for rapid changeover times Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 980/88001 62 1580 0.35 Low Back N/A 200 242/20658 68 1730 0.50 Low Back N/A 202 A.10 JCB MIDRANGE ATTACHMENTS Issue 1

MIDI CX Industrial Grapple A Heavy duty units with independent twin ram grapple Allows material wider than the unit width to be clamped Bolt on toeplate options Quickhitch mount for rapid changeover times Part Number Width Width Capacity Duty Weight (in) (mm) (m 3 ) (kg) 980/88820 62 1550 0.53 Twin ram 405 980/88994 66 1690 0.56 Twin ram 445 Muck Forks Single or twin ram option Fitted with top grab that aids material retention Fully Protected hydraulics Quickhitch mount for rapid changeover times Part Number Width Width Capacity Duty Weight (in) (mm) (m 3 ) 980/44600 59 1550 0.60 Single ram 202 980/88222 69 1700 0.75 Twin ram 248 JCB MIDRANGE ATTACHMENTS Issue 1 A.11

A MIDI CX Earth Drill For accurate and precise drilling Standard 2" Hexagon drive Maximum torque drilling power 6000Nm Choice of standard or heavy duty flights. Replacement teeth and pilot bits available for greater service life Part Number Maximum recommended standard Flight 980/A4327 1200mm (47 ) length, 900mm (36 ) diameter* * See section F for details of flights Industrial Forks & Frames Enables the machine to be utilised for loading and stacking Forks rated to 2 tonnes (lift governed by machine lift capacity) Load guard offers greater operator safety Part Number Length (in) Length (mm) Class Type 531/99400 41 1050 2B Industrial Forks 512/03000 48 1220 2 Industrial Frame 512/03100 46 1200 N/A Industrial Loadguard A.12 JCB MIDRANGE ATTACHMENTS Issue 1

MIDI CX Kerbmaster A The safe and simple way of manipulating kerbstones up to 180kgs in weight Incorporates hose burst check valve for failsafe operation Wearparts give good gripping properties without damage to the kerbstone Manual rotation offers line man total control of kerb alignment Maximum grab opening 170mm Part Number Description 980/A0724 Manual Rotation Kerb Grab 980/90862 Kerb Grab installation kit required Hammermaster For utility work, building, construction and demolition Durable design, virtually maintenance free Excellent power to weight ratio provides maximum performance Sealed for life accumulator Supplied Ready to Go with hoses, hanger bracket and moil and chisel Part Number Hammermaster Tool Diameter (mm) Operating Weight (kg) 980/90867 HM165Q 50 120 * See section G for details JCB MIDRANGE ATTACHMENTS Issue 1 A.13

A 3CX/4CX Manual Quickhitch Provides greater safety and less effort for the operator when changing buckets and attachments Durable design, with hardened steel jaws that keep wear to a minimum Mechanically operated with spring loaded lock released by use of a tommy bar The safety lock pin prevents accidental loss of bucket or attachment Part Number Type of Quickhitch Weight (kg) 980/88833 Manual 95 Bucket GP Buckets are available in a variety of widths to increase machine versatility A rolled top section increases structural integrity Replaceable wearparts increase durability and extend the working life Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 980/89817 9 230 0.040 Standard JCB Supertooth 83 980/89818 12 300 0.050 Standard JCB Supertooth 87 980/89881 14 350 0.070 Standard JCB Supertooth 105 980/89990 16 400 0.090 Standard JCB Supertooth 107 980/89991 18 450 0.120 Standard JCB Supertooth 114 980/89993 24 600 0.170 Standard JCB Supertooth 136 980/89994 32 800 0.240 Standard JCB Supertooth 167 980/89995 36 900 0.280 Standard JCB Supertooth 179 993/36400 Bucket Pin Kit - Weld in 980/89764 Bucket Pin Kit - Bolt on (9 230mm buckets) 340/00584 Bucket Pin Kit (12 300mm buckets) A.14 JCB MIDRANGE ATTACHMENTS Issue 1

3CX/4CX Bucket (Ribbed) A Ribbed Buckets are available in a variety of widths to increase machine versatility A rolled top section increases structural integrity Additional wear strips fitted to the rolled back shell offer additional strength and rigidity Replaceable wearparts increase durability and extend the working life Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 980/90005* 10 250 0.040 Ribbed JCB Supertooth 108 980/90006** 12 300 0.060 Ribbed JCB Supertooth 117 980/90007 16 400 0.075 Ribbed JCB Supertooth 119 980/90008 18 450 0.090 Ribbed JCB Supertooth 127 980/90009 20 500 0.100 Ribbed JCB Supertooth 136 980/90010 24 600 0.120 Ribbed JCB Supertooth 155 980/90011 32 800 0.170 Ribbed JCB Supertooth 194 980/90012 36 900 0.240 Ribbed JCB Supertooth 210 Optional weld in bucket pin kit 993/36400 is available, * 340/00582 Bucket Pin Kit Bolt in (10 /250mm Buckets) ** 340/00584 Bucket Pin Kit Bolt in (12 /300mm Buckets) 980/A5083 Bucket Pin Kit Bolt in (16 /400mm Buckets and above) Grading Bucket Double box section cross beam increases structural integrity. Ditch Maintenance/Grading buckets have a central reinforcing plate that gives added strength and rigidity. Drainage holes to reduce weight/density during operation. Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 980/86061 60 1500 0.220 Standard N/A 150 980/86060 72 1800 0.300 Standard N/A 172 JCB MIDRANGE ATTACHMENTS Issue 1 A.15

A 3CX/4CX Dedicated Bucket Dedicated Buckets are available in a variety of widths to increase machine versatility This range has been achieved by the use of Finite Element Analysis throughout the entire design Side plate reinforcement offers additional strength and rigidity Replaceable wearparts increase durability and extend the working life Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 980/62600 9 230 0.035 Standard Standard 90 980/62300 12 300 0.040 Standard Standard 95 980/62400 16 400 0.090 Standard Standard 104 980/61500 18 450 0.120 Standard Standard 121 980/61600 24 600 0.170 Standard Standard 144 980/61700 30 750 0.210 Standard Standard 175 980/61800 36 900 0.300 Standard Standard 197 These buckets are for use with dedicated Quickhitch 980/88854 Dedicated Ditch Maintenance Bucket Side plate reinforcement offers additional strength and rigidity Drainage holes reduce weight/density during operation Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 980/66000 60 1500 0.220 Standard N/A 142 These buckets are for use with dedicated Quick Hitch 980/88854 A.16 JCB MIDRANGE ATTACHMENTS Issue 1

3CX/4CX Taper Ditch Bucket A Choice of angles for steep or shallow sided ditches Standard JCB wearparts and extended sideplate reinforcement for extended service life Double box section cross beam increases structural integrity. Part Number Width Width Capacity Taper Angle Teeth Weight (in) (mm) (m 3 ) (kg) 531/02700 66 1676 0.060 30 0 N/A 185 537/16100 42 1067 0.100 60 0 N/A 111 Jaw Bucket Two attachments in one, a standard bucket and a powerful hydraulic jaw JCB designed for maximum compatibility, performance and durability Additional wear strip provides increased strength and resistance to abrasion Direct mount only Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 531/23200 12 300 0.07 Ribbed JCB Supertooth 225 531/20100 18 450 0.14 Ribbed JCB Supertooth 255 531/19800 24 600 0.20 Ribbed JCB Supertooth 280 JCB MIDRANGE ATTACHMENTS Issue 1 A.17

A 3CX/4CX Tilting Grading Bucket Hydraulically operated tilting grading bucket Double acting auxiliary circuit required Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 980/89975 60 1500 0.16 Standard N/A 340 Ripper Tooth Choice of fabricated or cast units Breaks up hard surfaces such as frozen or compacted earth, concrete or tarmac Replaceable tip for even longer service life Part Number Description Weight (kg) 529/03000 Ripper Tooth - Cast 74 990/81700 Ripper Tooth - Fabricated 91 A.18 JCB MIDRANGE ATTACHMENTS Issue 1

3CX/4CX Earthdrill A For accurate and precise drilling Standard 2" hexagon drive Maximum torque drilling power 6000Nm Choice of standard or heavy duty flights Replacement teeth and pilot bits available for greater service life Part Number Maximum recommended standard flight 980/A3596 1200mm length, 900mm (36 ) diameter* * See section F for details of flights Kerbmaster The safe and simple way of manipulating kerbstones up to 180kgs in weight Incorporates hose burst check valve for failsafe operation Wearparts give good gripping properties without damage to the kerbstone Available with manual or full hydraulic rotation options Maximum grab opening 170mm Part Number Description 980/A0724 Manual Rotation Kerb Grab 980/89941 Kerb Grab installation kit (required with the Kerb Grab above) 980/A0725 Hydraulic Rotation Kerb Grab 980/89942 Kerb Grab installation kit (required with the Kerb Grab above) * Quickhitch compatible Hanger Bracket 335/08502 available JCB MIDRANGE ATTACHMENTS Issue 1 A.19

A 3CX/4CX Patch Planer Precise planing with depth adjustment up to 115mm Full 400mm width cutting drum Hydraulic flow required is 90-200 l/min Easily adjustable wheel configuration allows planing to kerb/grid edge Replacement tooth picks are available to extend unit life Part Number Description 980/88802 Patch Planer Compactor For trench reinstatement and general ground compaction Dipper mounted ensures the operator is fully protected from the effects of vibration Connects to the high flow circuit, the unit only requires 24 lpm In built protection valve safeguards the unit from hydraulic pressure surges Suitable for direct or quickhitch mount Part Number Width Length Frequency Centrifugal Force Weight (mm) (mm) (kg) 980/32000 305 739 33.3Hz @ 2000 rev/min 16.3kN @ 33.3HZ 178.5kg A.20 JCB MIDRANGE ATTACHMENTS Issue 1

3CX/4CX Concrete Skip A Allows safe and accurate placement of up to 400 litres of concrete Manually operated sprung lever and chute for even greater accuracy Can be either fork mounted or crane hook mounted for better access Part Number Description Weight (kg) 547/51600 Concrete Skip 152 Fork Mounted Hook Fully tested and approved - 1 tonne capacity Attachment secures firmly to pallet forks Fork mounting allows quick and easy installation Part Number Description Capacity 126/01539 Fork Mounted Hook 1 Ton Capacity JCB MIDRANGE ATTACHMENTS Issue 1 A.21

A 3CX/4CX Weld On Brackets Supplied as a pair ready for field fit Weld on bracket allow the conversion of direct mount shovels to quickhitch mount Part Number Description Duty 980/88160 Weld On Brackets To Fit GP Shovel 980/88161 Weld On Brackets To Fit 6 in 1 Shovel Street Pads Supplied complete, ready to fit. Simple installation Manufactured from high quality materials for long service life JCB designed for maximum compatibility, performance and durability Part Number Description Serial Number 980/47200 Street Pads Serial No. 290000 to 460000 980/88215 Street Pads Serial No. 460001 Onwards A.22 JCB MIDRANGE ATTACHMENTS Issue 1

3CX/4CX Pole Planter A Full hydraulic clamping for the safe handling and planting of poles Side roller option allows lateral movement on the pole before grabbing Mounted on the loader arms to maintain machine stability and operator safety Connects to the loader auxiliary service, a 12 volt electric supply required to operate the diverter valve Optional A Frame mounted to the top of the stabiliser legs offers greater stability when carrying the pole over a distance Part Number To fit Capacity (kg) Pole Dia (mm) Weight (kg) Description 980/68000 3CX/4CX 1700 150-450 630 Pole Planter with side roller* 980/88428 3CX/4CX 1700 150-450 610 Pole Planter** * Requires harness (P12-980/88430, P21-980/89451) ** Requires harness (P8-980/69900, P12-980/88430, P21-980/89451) Options: A frame (M300001 - M460000) 980/39700 A frame (M460001 on) 980/88429 Sweeper Full 2430mm width sweeping. LH or RH 20 degree mechanical angling. Sweeps to gutter edge. Quickhitch mount for rapid changeover times. Part Number Width (in) Width (mm) Description 980/34500 96 2438 Road Sweeper JCB MIDRANGE ATTACHMENTS Issue 1 A.23

A 3CX/4CX Sweeper Collector Heavy duty canopy gives added strength to take the knocks of every day use Floating Frame system automatically follows the ground contour ensuring sweeper output Large diameter steel and polypropylene brush segments for superior finish Sweeping and hopper emptying hydraulically operated from the cab Available with dust suppression and/or gutter brush options Part Number Width (in) Width (mm) Capacity (litres) Type Integral Tank 980/90507 96 2400 400 SC240 No 980/90508 96 2400 400 SC240 Yes Options: 3CX/4CX Quickhitch Mounting Frame 980/90417 Pallet fork mounting frame 980/90418, Gutter brush (Optional) For additional information on Sweeper Collectors, see section E Loader Quickhitch Allows rapid changeover of quickhitch compatible attachments Available as manual, hydraulic or hydraulic with integral forks Ag/Tool carrier version is compatible with Loadall Q/fit dimensions Part Number Type Serial Number Weight (kg) 124/56500 Mechanical Serial No. 290000 to 400000 130 980/89487 Mechanical Serial No. 400001 Onwards 209 980/89488 Hydraulic Serial No. 400001 Onwards 223 980/89808 Hydraulic with Integral Forks Serial No. 941510 Onwards 308 126/03126 Hydraulic Loadall Q/Fit Pick Up Serial No. 400001 Onwards 165 A.24 JCB MIDRANGE ATTACHMENTS Issue 1

3CX/4CX General Purpose Shovel A JCB designed for maximum compatibility, performance and durability Toeplate drilled to accept either teeth or toeplate Direct mount or JCB Loader Quickhitch compatible options Part Number Width Width Capacity Duty Description Weight (in) (mm) (m 3 ) (kg) 125/36700 88 2235 1.00 General Purpose GP Direct Mount 355 125/36800 93 2350 1.10 General Purpose GP Direct Mount 368 124/62700 96 2438 1.10 General Purpose GP Q/Hitch 414 Heavy Duty Shovel JCB designed for maximum compatibility, performance and durability Designed specifically for hard dig situations Direct mount or JCB Loader Quickhitch compatible options Part Number Width Width Capacity Duty Description Weight (in) (mm) (m 3 ) (kg) 125/38900 88 2235 1.00 Heavy Duty HD Direct Mount 449 126/00186 93 2350 1.10 Heavy Duty HD Q/Hitch 485 125/36900 93 2350 1.10 Heavy Duty HD Direct Mount 461 125/37000* 93 2350 1.30 Heavy Duty HD Direct Mount 557 * 4CX only JCB MIDRANGE ATTACHMENTS Issue 1 A.25

A 3CX/4CX 6 in 1 Shovel Total versatility in all material handling duties from simple loading to precision grading and including grabbing, dozing, backblading and digging. Optional weld on fork kits to increase versatility Operates from standard loader auxiliary circuit Part Number Width Width Capacity Duty Description Weight (in) (mm) (m 3 ) (kg) 126/00583 88 2235 1.00 6 in 1 Direct Mount 698 126/00578 93 2350 1.10 6 in 1 Direct Mount 761 126/00581 93 2350 1.00 6 in 1 Q Hitch 766 126/00649 93 2350 1.20 6 in 1 Q Hitch 799 126/00593 93 2350 1.20 6 in 1 Direct Mount 805 126/01526 96 2438 1.30 6 in 1 Direct Mount 847 126/01532 96 2438 1.30 6 in 1 Q Hitch 881 Side Tip Shovel Ideally suited for areas where tipping space is limited and the load needs to be accurately placed Available in left hand or right hand configurations Operates from standard loader auxiliary circuit Part Number Width Width Capacity Duty Description Weight (in) (mm) (m 3 ) (kg) 980/89067 90 2290 1.13 Right Tip RH Q Hitch 750 980/89066 90 2290 1.13 Left Tip LH Q Hitch 750 A.26 JCB MIDRANGE ATTACHMENTS Issue 1

3CX/4CX Snowblade A Incorporates 25 ( to either side) angling to enable road/blade clearance Fitted with replaceable rubber wear strip for protection against protruding ironwork 2290mm width with blade angled at 25º Additional jockey wheel aids in steadier travel/use Part Number Width Width Capacity Duty Description Weight (in) (mm) (m 3 ) (kg) 980/89971 90 2290 N/A Hydraulic Snowblade 490 Industrial Forks The SWL figure is for forks, not the machine. Machine spec' to be checked for maximum lift capacity Fork sizes are Fork Width x Fork Thickness x Fork Length Forks supplied in pairs fully tested and certified Part Number Width x Thickness Class SWL tonne per fork Weight x Length(mm) at 500mm load centre (kg) 123/01374 100 x 45 x 1200 2B 2.0 120 JCB MIDRANGE ATTACHMENTS Issue 1 A.27

A 3CX/4CX Industrial Fork Frame JCB designed for maximum compatibility, performance and durability Designed to confirm to industrial fork standards Adjustable fork centres allow fork positioning for the safest loading point Part Number Width Width Class To Fit Weight (in) (mm) (kg) 980/07200* 59 1500 2 Quickhitch Compatible 204 * Loadguard 980/14200 to fit Fork Frame Hammermaster For utility work, building and construction Durable solid body design Sealed for life accumulator Excellent power to weight ratio provides maximum performance Includes moil and chisel Part Number Hammermaster Tool Diameter (mm) Operating Weight (kg) 980/90239 HM385Q 80 312 980/90245 HM495Q 95 419 * See section G for details A.28 JCB MIDRANGE ATTACHMENTS Issue 1

3CX/4CX Hydraulic Kits A Designed by JCB for JCB machines to give optimum performance Comprehensive fitting instructions and technical backup No invalidation of machine warranty Hydraulic Kits 3CX 4CX Rockbreaker Installation Yes Yes Air Conditioning Yes Yes HBCV Kits, Shovel/Boom Yes Yes Hand Held Tool Circuit* Yes Yes SRS Kit Yes Yes Loader Auxillary Yes Yes Shovel Mounted Fork Kits Yes Yes Note: Please check APS/Parts Pro for latest kits and older machine kits available JCB MIDRANGE ATTACHMENTS Issue 1 A.29

COMPACT LOADALL Applicable Machines - 520-40, 520-50, 524-50, 525-50 & 527-55 GP Shovel B Rolled back shell for easy material ejection Substantial toeplate gives long lasting protection and minimal wear Part Number Width Width Capacity To Fit Weight (in) (mm) (m 3 ) (kg) 514/00500* 69 1750 0.70 Compact Tool Carrier 300 510/83600 69 1750 0.70 Compact Tool Carrier 290 514/01200* 76 1950 0.70 Compact Tool Carrier 310 510/83700 76 1950 0.90 Compact Tool Carrier 330 514/00800* 78 2000 0.70 Compact Tool Carrier 320 331/12483 80 2050 1.00 Compact Tool Carrier 305 994/10989 90 2286 1.00 Pin and Cone 410 *Spill Guard Industrial Grapple Heavy Duty units with independent twin ram grapple Allows material wider than the unit width to be clamped Bolt on toeplate options Quickhitch mount for rapid changeover times. Part Number Width Width Capacity To Fit Weight (in) (mm) (m 3 ) (kg) 980/89113 78 2000 0.70 Compact Tool Carrier 535 JCB MID RANGE ATTACHMENTS Issue 1 B.1

COMPACT LOADALL Wastemaster Skip B Lattice base framework enables access from any side for fast placement, removal and unloading The fork retainer ensures the Wastemaster skip is safely attached during transportation and unloading Strengthened top sections improve durability The locking mechanism and safety clip on the tipping device ensure complete safety during loading and transportation Part Number Capacity (m 3 ) To Fit Thickness (mm) Weight (kg) 980/89009 1.10 Fork Mount 3 230 980/89014 1.50 Fork Mount 3 245 980/89017 1.10 Fork Mount 5 300 980/89018 1.50 Fork Mount 5 330 Crane Hook Quickhitch compatible Designed for movement of suspended loads Fully tested and approved - 1 tonne capacity Part Number Capacity (tons) Fitment Weight (kg) 993/50100 1 Quickhitch 106 B.2 JCB MID RANGE ATTACHMENTS Issue 1

COMPACT LOADALL Floating Fork Frame B Quickhitch compatible frames for pallet forks Floating pin style fitment for uneven ground and loads Complete with fork pin Part Number Pin Size (mm) Fitment Weight (kg) 514/00200 45.0 Compact Tool Carrier 125 514/01600* 50.7 Compact Tool Carrier 151 * 527-55 Must use 50.7mm Diameter Pin Size Pallet Forks The SWL figure is for forks, not the machine. Machine spec' to be checked for maximum lift capacity Choice of sizes and pin fitments to cover most machines Fork sizes are Fork Width x Fork Thickness x Fork Length Part Number Width x Thickness Pivot pin SWL tonne per fork Weight x Length(mm) dia (mm) at 500mm load centre (kg) 545/82101 80 x 40 x 1067 45 1.00 97 545/82102 100 x 40 x 1200 45 1.30 105 514/02400 100 x 45 x 1200 45 1.80 105 514/02200 125 x 40 x 1200 45 1.80 103 545/82121 100 x 40 x 1067 50.7 1.55 97 545/82118 100 x 40 x 1067 50.7 1.30 98 545/82126 125 x 40 x 1200 50.7 1.85 104 545/82136 100 x 45 x 1200 50.7 1.85 118 545/82134 100 x 45 x 1067 50.7 1.85 120 JCB MID RANGE ATTACHMENTS Issue 1 B.3

COMPACT LOADALL Industrial Fork Frame B Enables the machine to be used for loading and stacking Various length options available to reduce possible damage when stacking Supplied with certification (lift governed by machine capability) Part Number Width Width Class To Fit Weight (in) (mm) (kg) 514/00700 43 1100 2 Compact Tool Carrier 106 514/01500* 51 1300 3 Compact Tool Carrier 235 * 527-55 Must use Class 3 Carriage & Forks Sideshift Carriage Gives the ability to position the load without moving the machine Sideshift fits between a industrial fork carriage and the industrial forks Choice of class 2 or 3 Part Number Width Width Class To Fit Weight (in) (mm) (kg) 515/20034 43 1100 2 Class 2 Frame Compatible 70 332/U5615 47 1200 3 Class 3 Frame Compatible 165 B.4 JCB MID RANGE ATTACHMENTS Issue 1

COMPACT LOADALL Industrial Forks The SWL figure is for forks, not the machine. Machine spec' to be checked for maximum lift capacity Choice of sizes and class fitments to cover most machines Fork sizes are Fork Width x Fork Thickness x Fork Length B Part Number Width x Thickness Class SWL tonne per fork Weight x Length(mm) at 500mm load centre (kg) 547/02500 100 x 45 x 1067 2B 1.90 115 547/08500 100 x 45 x 1200 2B 1.90 122 547/07900 100 x 50 x 1067 3B 2.34 130 547/08600 125 x 50 x 1200 3B 2.92 186 Rehandling Shovel Rolled Backs - Easy Release of Material Drilled Toe Plates - To Accept Teeth or Bolt on Toe Plates Wear Strips on Base - To Minimise Wear of Bucket Shell Part Number Width Width Capacity To Fit Weight (in) (mm) (m 3 ) (kg) 980/27200 69 1750 0.60 Compact Tool Carrier 305 JCB MID RANGE ATTACHMENTS Issue 1 B.5

COMPACT LOADALL Sweeper Collector B Heavy duty one piece canopy for superior structural strength Floating mounting frame allows the sweeper to follow the contours of the ground Optional internal water tank provides class leading visibility Hydraulically controlled collection hopper is operated from the cab Combination steel and polyproplyene brush for superior sweeping action Part Number Width (in) Width (mm) Capacity (litres) Type Integral Tank 980/90515 82 2100 270 SC210 No 980/90516 82 2100 270 SC210 Yes Sweeper Collectors to be used with Mounting Frame/Compact Tool Carrier 980/89011 or Pallet Fork Frame 980/90418. Gutter Brush Optional For additional information on Sweeper Collectors, refer to section E Grain/Potato Bucket Rolled Backs - easy release of material 6 mm plate shell 8mm end plates Round bar edges - prevents damage to root crops Heavy duty Hardox 275 toeplate (250mm x 30mm) Substantial Hardox 250 wearplates (125mm x 12mm) Part Number Width Width Capacity To Fit Weight (in) (mm) (m 3 ) (kg) 980/26800 69 1750 1.00 Compact Tool Carrier 340 980/26900 78 1676 1.20 Compact Tool Carrier 364 980/89841 84 2100 1.40 Compact Tool Carrier 496 980/73700 84 2100 1.40 Pin and Cone 496 980/90159 90 2286 2.00 Pin and Cone 630 980/90161 90 2286 2.50 Pin and Cone 756 B.6 JCB MID RANGE ATTACHMENTS Issue 1

COMPACT LOADALL Power Grab B Choice of KV or Hardox tines to suit all applications Powerful twin top rams to give optimum penetration and tearout Wide opening jaw with curved top tines give the ability to operate close to walls Part Number Width Width Capacity Carriage Further Weight (in) (mm) (m 3 ) Information (kg) 980/89869 72 1800 1.00 Compact Tool Carrier KV Tines 432 980/90084 84 2100 1.20 Compact Tool Carrier KV Tines 479 980/90576 90 2286 1.90 Pin and Cone KV Tines 704 980/90124 90 2286 1.90 Pin and Cone 9 Hardox 6 KV 829 Muck Fork and Grab Hoses Fitted As Standard - Ready to Go to Work Wear Plates on Fork Base - Extended Operating Life Side Tines - Minimise Spillage 5 Bar Double Profile Top Grab - Superior Strength Part Number Width Width Capacity Carriage Further Weight (in) (mm) (m 3 ) Information (kg) 980/90144 90 2286 1.90 Pin and Cone 10 Standard Tines 814 980/90134 90 2286 1.90 Pin and Cone 10 KV Tines 778 994/10905 96 2438 2.20 Pin and Cone 9 Hardox Tines 984 JCB MID RANGE ATTACHMENTS Issue 1 B.7

COMPACT LOADALL Manure Fork B Available in a choice of 3 widths with either KV or Hardox Tines Fork unit can be retro fitted with top grab to further its capabilities Part Number Width Width Capacity Carriage Further Weight (in) (mm) (m 3 ) Information (kg) 980/89957 72 1800 1.00 Compact Tool Carrier 8 KV Tines 295 980/90069 84 2100 1.20 Compact Tool Carrier 9 KV Tines 314 980/90625 90 2286 1.90 Pin and Cone 10 KV Tines 518 980/90628 90 2286 1.90 Pin and Cone 9 Hardox Tines 558 Multi Shovel The JCB multi shovel combines a shovel and top grab to give a multi-purpose tool capable of performing a number of tasks Substantial toeplate gives long lasting protection and minimal wear Rolled back profile to allow easy release of material Not for use in arduous waste rehandling applications Part Number Width (in) Width (mm) Capacity (m 3 ) Carriage Weight (kg) 994/10942 72 1800 0.70 Compact Tool Carrier 745 B.8 JCB MID RANGE ATTACHMENTS Issue 1

COMPACT LOADALL Shear Grab Cuts grass and maize silage from the clamp ensuring high feed quality KV tines provide extra strength Heavy duty design for improved durability B Part Number Width Width Capacity Carriage Further Weight (in) (mm) (m 3 ) Information (kg) 980/88007 67 1700 0.80 Compact Tool Carrier KV Tines 445 980/88008 66 1675 0.80 Pin and Cone KV Tines 450 Single Bale Spike Suitable for handling round bales up to 1.8m diameter Single KV tine Anti-rotation tine for improved stability Part Number Carriage Further information Weight (kg) 980/25100 Compact Tool Carrier KV tines 75 980/88011 Pin and Cone KV tines 80 JCB MID RANGE ATTACHMENTS Issue 1 B.9

COMPACT LOADALL Twin Bale Spike B Suitable for handling two round bales up to 1.8m diameter Also capable of handling large square bales Features 6 KV tines for maximum bale stability Part Number Carriage Further information Weight (kg) 980/88009 Compact Tool Carrier KV tines 120 980/88010 Pin and Cone KV tines 120 Wrapped Bale Clamp (single bale) Twin roller mounted on KV tines to allow unit to be used as twin spike Roller design eliminates damage to bale wrap Part Number Carriage Further information Weight (kg) 980/25800 Compact Tool Carrier KV tines (in rollers) 120 980/88016 Pin and Cone KV tines (in rollers) 120 B.10 JCB MID RANGE ATTACHMENTS Issue 1

COMPACT LOADALL Hydraulic Kits B Designed by JCB for JCB machines to give optimum performance Comprehensive fitting instructions and technical backup No invalidation of machine warranty Note: Please check APS/Parts Pro for latest kits and older machine kits available JCB MID RANGE ATTACHMENTS Issue 1 B.11

LOADALL Loadall Machine compatibility - The following section differs from the rest of the book as it is governed by hitch type. Rather than list out all the Loadall model variants against each attachment they have been identified by hitch type. As covered in the previous pages the main hitches available are the Qfit, Tool Carrier and Compact tool carrier, you will also find attachments compatible with Pin and Cone & Manitou. As the attachments are listed only by hitch type consideration for the carrier machines lift capacity will need to be calculated against the capacities and weights shown. TM310 and RTFL machine attachments are also covered in the Loadall section due availability of either Pin & Cone or Qfit options on the TM machines and the availability of a Multihitch* to convert the RTFL to Q fit pick up. Again the carrier machines lift capacity will need to be calculated against the capacities and weights shown. *Multihitch = 548/41500 (requires auxiliary loader circuit) GP Shovel C Rolled back shell for easy material ejection Substantial toeplate gives long lasting protection and minimal wear Side wear plates protect bucket shell Part Number Width Width Capacity To Fit Weight (in) (mm) (m 3 ) (kg) 980/88130 90 2286 1.10 Tool Carrier 365 980/A5063 90 2286 1.00 Q Fit 410 994/10989 90 2286 1.00 Pin & Cone 410 547/38900 90 2286 1.40 Q Fit 430 6 in 1 Shovel Total versatility in all material handling duties from simple loading to precision grading and including grabbing, dozing, backblading and digging. JCB designed for maximum compatibility, performance and durability Operates from standard loader auxiliary circuit Part Number Width Width Capacity Description Hitch Weight (in) (mm) (m 3 ) (kg) 980/37200 83 2235 0.67 6 in 1 Shovel Tool Carrier 750 994/A2083 90 2350 1.10 6 in 1 Shovel Q Fit 680 JCB MID RANGE ATTACHMENTS Issue 1 C.1

LOADALL Heavy Duty Shovel C JCB designed for maximum compatibility, performance and durability Designed specifically for hard dig situations Part Number Width Width Capacity Description Hitch Weight (in) (mm) (m 3 ) (kg) 980/88028 90 2286 1.50 Heavy Duty Shovel Q Fit 671 980/88027 90 2286 1.50 Heavy Duty Shovel Tool Carrier 620 Rehandling Shovel Rolled back shell gives easy release of material Drilled toe plates to accept teeth or bolt on toe plates Wear strips on base minimise wear of bucket shell Part Number Width Width Capacity Description Hitch Weight (in) (mm) (m 3 ) (kg) 980/36000 83 2110 0.80 Rehandling Shovel Tool Carrier 286 980/72600 83 2110 1.20 Rehandling Shovel Tool Carrier 362 980/27400 90 2286 1.00 Rehandling Shovel Q Fit 360 980/89538 90 2286 1.00 Rehandling Shovel Tool Carrier 360 547/37600 90 2286 1.20 Rehandling Shovel Q Fit 416 980/60800 90 2286 1.40 Rehandling Shovel Tool Carrier 400 980/27500 90 2286 1.50 Rehandling Shovel Q Fit 454 980/88445 90 2286 1.80 Rehandling Shovel Tool Carrier 460 545/47076 96 2438 1.00 Rehandling Shovel Q Fit 530 C.2 JCB MID RANGE ATTACHMENTS Issue 1

LOADALL Industrial Grapple Heavy Duty units with independent twin ram grapple Allows material wider than the unit width to be clamped Bolt on toeplate options Quickhitch mount for rapid changeover times. C Part Number Width Width Capacity To Fit Weight (in) (mm) (m 3 ) (kg) 980/88340 90 2290 0.75 Tool Carrier 700 994/10564 90 2290 0.75 Q Fit 807 Wastemaster Skip Lattice base framework enables access from any side for fast placement, removal and unloading The fork retainer ensures the Wastemaster skip is safely attached during transportation and unloading Strengthened top sections improve durability The locking mechanism and safety clip on the tipping device ensure complete safety during loading and transportation Part Number Capacity (m 3 ) To Fit Thickness (mm) Weight (kg) 980/89009 1.10 Fork Mount 3 230 980/89014 1.50 Fork Mount 3 245 980/89017 1.10 Fork Mount 5 300 980/89018 1.50 Fork Mount 5 330 JCB MID RANGE ATTACHMENTS Issue 1 C.3

LOADALL Swivel Hook C Fork mounted design allows safe lifting using any machine fitted with pallet forks (dependent on lift capacity of carrier machine) Secured by fork retention pins for maximum safety Fully tested and supplied with certificate for added peace of mind Part Number Capacity (tons) Fitment Weight (kg) 545/70200 4 Fork mount 27 Extension Jib Lattice framework provides a strong, lightweight design Fully tested and supplied with certificate for added peace of mind Supplied with swivel hook Part Number Description To Fit Capacity (kg) Weight (kg) 980/36800 4 metre extension jib Tool Carrier 350 95 545/41600 4 metre extension jib Q Fit 400 115 980/89977 3.7 metre HD extension jib Q Fit 650 280 C.4 JCB MID RANGE ATTACHMENTS Issue 1

LOADALL Concrete Skip Allows safe and accurate placement of up to 400 litres of concrete Manually operated sprung lever and chute for even greater accuracy Can be either fork mounted or crane hook mounted for better access C Part Number Description Carriage Weight (kg) 547/51600 400 Litre Capacity Concrete Skip Fork mount 152 Trussmaster All JCB Trussmasters are JCB Q-fit compatible enabling fast fitment and changeover Fully tested and approved for safe operation Hydraulic version enables infinite extension positions for all sizes and applications Fitted with a 'steadying yoke' as standard for safe transportation of roof trusses Supplied with handbook and flipcharts to assist with installation and operation Only to be used with machines with stabiliser legs Part Number Description To Fit Capacity (kg) Weight (kg) 980/89205 Trussmaster Mechanical Q Fit 300-150* 230 980/89528 Trussmaster Hydraulic Q Fit 300-175* 320 * Fully retracted and fully extended JCB MID RANGE ATTACHMENTS Issue 1 C.5

LOADALL Wastemaster Shovel C Wastemaster Shovel with top grab Wastemaster Shovel with 2 piece top grab Supplied with bolt on toeplate to prolong shovel life One or two piece top grab for clamping bulky, uneven loads Heavy duty design for working in waste environments Part Number Width Width Description To Fit Weight (in) (mm) (kg) 980/A1004 90 2286 Single top grab 2.08m 3 capacity Q fit 1065 980/89976 90 2286 2 piece top grab 1.60m 3 capacity Q fit 1180 Wastemaster Fork Hardox tines fitted as standard Full width wear strip for extended service life Part Number Width Width Description To Fit Weight (in) (mm) (kg) 980/A1009 90 2286 Single top grab 1.90m 3 capacity Q fit 725 C.6 JCB MID RANGE ATTACHMENTS Issue 1

LOADALL Fork Positioner Allows change of fork position from the cab, reducing downtime Uses existing round bar pallet forks No manual handling required means increased operator safety 385mm - 1100mm variable fork spread Part Number Pin Size (mm) Fitment Capacity (kg) C 980/A1010 50.7 Q Fit 4000 980/A1012 57.0 Q Fit 5000 Floating Fork Frame Quickhitch compatible frames for pallet forks Floating pin style fitment for uneven ground Complete with fork pin Part Number Pin Size (mm) Fitment Weight (kg) 545/47096 50.7 Tool Carrier 135 994/10446 57.0 Q Fit 190 JCB MID RANGE ATTACHMENTS Issue 1 C.7

LOADALL Pallet Forks C The SWL figure is for forks, not the machine. Machine spec' to be checked for maximum lift capacity Choice of sizes and pin fitments to cover most machines Fork sizes are Fork Width x Fork Thickness x Fork Length Part Number Width x Thickness Pivot pin SWL tonne per fork Weight x Length(mm) dia (mm) at 500mm load centre (kg) 545/82121 100 x 40 x 1067 50.7 1.55 97 545/82118 100 x 40 x 1067 50.7 1.30 98 545/82126 125 x 40 x 1200 50.7 1.85 104 545/82136 100 x 45 x 1200 50.7 1.85 118 545/82134 100 x 45 x 1067 50.7 1.85 120 545/82130 100 x 50 x 1067 57 2.05 130 545/82132 100 x 50 x 1200 57 2.05 140 Industrial Fork Frame Enables the machine to be used for loading and stacking Various length options available to reduce possible damage when stacking Supplied with certification (lift governed by machine capability) Part Number Width Width Class To Fit Weight (in) (mm) (kg) 545/47017 54 1370 2 Tool Carrier 130 545/40000 54 1370 2 Q Fit 150 545/40200 78 1980 2 Q Fit 210 545/40800 59 1500 3 Q Fit 250 C.8 JCB MID RANGE ATTACHMENTS Issue 1

LOADALL Sideshift Carriage Gives the ability to position the load without moving the machine Sideshift fits between a industrial fork carriage and the industrial forks Choice of class 2 or 3 C Part Number Width Width Class To Fit Weight (in) (mm) (kg) 515/20034 43 1100 2 Class 2 Frame Compatible 70 332/U5615 47 1200 3 Class 3 Frame Compatible 165 Industrial Forks The SWL figure is for forks, not the machine. Machine spec' to be checked for maximum lift capacity Choice of sizes and class fitments to cover most machines Fork sizes are Fork Width x Fork Thickness x Fork Length Part Number Width x Thickness Class SWL tonne per fork Weight x Length(mm) at 500mm load centre (kg) 547/02500 100 x 45 x 1067 2B 1.90 115 547/08500 100 x 45 x 1200 2B 1.90 122 547/07900 100 x 50 x 1067 3B 2.34 130 547/08600 125 x 50 x 1200 3B 2.92 186 JCB MID RANGE ATTACHMENTS Issue 1 C.9

LOADALL Sweeper Collector C Heavy duty one piece canopy for superior structural strength Floating mounting frame allows the sweeper to follow the contours of the ground Optional internal water tank provides class leading visibility Hydraulically controlled collection hopper is operated from the cab Combination steel and polyproplyene brush for superior sweeping action Part Number Width (in) Width (mm) Capacity (litres) Type Integral Tank 980/90507 96 2400 400 SC240 No 980/90508 96 2400 400 SC240 Yes Sweeper must be used with a mounting frame to connect to machine Q Fit Only 980/90419, Q Fit & Forks 980/90420, Tool Carrier 980/89013 Gutter Brush (Optional) See section E for further details Grain/Potato Bucket 6 mm plate shell 8mm end plates Rolled Backs - easy release of material Round bar edges - prevents damage to root crops Heavy duty Hardox 275 toeplate (250mm x 30mm) Substantial Hardox 250 wearplates (125mm x 12mm) Part Number Width Width Capacity To Fit Weight (in) (mm) (m 3 ) (kg) 980/73700 84 2100 1.40 Pin and Cone 496 980/89436 90 2286 1.50 Q Fit 510 980/89437 90 2286 1.75 Q Fit 590 980/89438 90 2286 2.00 Q Fit 630 980/89439 90 2286 2.50 Q Fit 756 980/89471 90 2286 1.50 Tool Carrier 510 980/89472 90 2286 2.00 Tool Carrier 630 980/90159 90 2286 2.00 Pin and Cone 630 980/90161 90 2286 2.50 Pin and Cone 756 980/90160 90 2286 2.00 Manitou 630 980/90162 90 2286 2.50 Manitou 756 980/89842 96 2438 2.25 Q Fit 600 980/89440 96 2438 2.75 Q Fit 780 994/10874 96 2438 3.00 Q Fit 790 994/10907 96 2438 2.75 Manitou 780 C.10 JCB MID RANGE ATTACHMENTS Issue 1

LOADALL Beet Basket Suitable for handling root crops Spaced bar design to allow small material to drop through Round bar protection on leading edge to minimise crop damage C Part Number Width Width Capacity To Fit Weight (in) (mm) (m 3 ) (kg) 980/88020 90 2286 1.90 Tool Carrier 435 980/26400 86 2250 1.90 Q Fit 440 980/26500 90 2286 1.50 Q Fit 435 980/26600 90 2286 2.10 Q Fit 465 994/10875 96 2438 3.00 Q Fit 650 Power Grab Choice of KV or Hardox tines to suit all applications Powerful twin top rams to give optimum penetration and tearout Wide opening jaw with curved top tines give the ability to operate close to walls Part Number Width Width Capacity Carriage Further Weight (in) (mm) (m 3 ) Information (kg) 980/90574 90 2286 1.90 Q Fit KV Tines 707 980/90575 90 2286 1.90 Tool Carrier KV Tines 728 980/90576 90 2286 1.90 Pin & Cone KV Tines 704 980/90577 90 2286 1.90 Manitou KV Tines 718 980/90121 90 2286 1.90 Q Fit 9 Hardox 6 KV 831 980/90122 90 2286 1.90 Tool Carrier 9 Hardox 6 KV 852 980/90124 90 2286 1.90 Pin & Cone 9 Hardox 6 KV 829 980/90125 90 2286 1.90 Manitou 9 Hardox 6 KV 815 JCB MID RANGE ATTACHMENTS Issue 1 C.11

LOADALL Muck Fork and Grab C Hoses Fitted As Standard - Ready to Go to Work Wear Plates on Fork Base - Extended Operating Life Side Tines - Minimise Spillage 5 Bar Double Profile Top Grab - Superior Strength Part Number Width Width Capacity Carriage Further Weight (in) (mm) (m 3 ) Information (kg) 980/90141 90 2286 1.90 Q Fit 10 Standard Tines 816 980/90131 90 2286 1.90 Q Fit 10 KV Tines 780 980/90136 90 2286 1.90 Q Fit 9 Hardox Tines 848 980/90142 90 2286 1.90 Tool Carrier 10 Standard Tines 838 980/90132 90 2286 1.90 Tool Carrier 10 KV Tines 802 980/90137 90 2286 1.90 Tool Carrier 9 Hardox Tines 868 980/90144 90 2286 1.90 Pine & Cone 10 Standard Tines 814 980/90134 90 2286 1.90 Pine & Cone 10 KV Tines 778 980/90139 90 2286 1.90 Pine & Cone 9 Hardox Tines 872 980/90135 90 2286 1.90 Manitou 10 KV Tines 791 980/90140 90 2286 1.90 Manitou 9 Hardox Tines 858 994/10905 96 2438 2.20 Pine & Cone 9 Hardox Tines 975 994/10876 96 2438 2.20 Q Fit 9 Hardox Tines 975 994/10906 96 2438 2.20 Manitou 9 Hardox Tines 975 Manure Fork Available in a choice of 3 widths with either KV or Hardox Tines Fork unit can be retro fitted with top grab to further its capabilities Bracket options to suit Compact Tool Carrier, Q-Fit, Tool Carrier, Pin & cone and Manitou Part Number Width Width Capacity Carriage Further Weight (in) (mm) (m 3 ) Information (kg) 980/90623 90 2286 1.90 Q Fit 10 KV Tines 510 980/90624 90 2286 1.90 Tool Carrier 10 KV Tines 532 980/90625 90 2286 1.90 Pin & Cone 10 KV Tines 518 980/90626 90 2286 1.90 Manitou 10 KV Tines 521 980/90627 90 2286 1.90 Q Fit 9 Hardox Tines 550 980/90628 90 2286 1.90 Pin & Cone 9 Hardox Tines 558 980/90629 90 2286 1.90 Manitou 9 Hardox Tines 561 C.12 JCB MID RANGE ATTACHMENTS Issue 1

LOADALL Multi Shovel The JCB multi shovel combines a shovel and top grab to give a multi-purpose tool capable of performing a number of tasks Substantial toeplate gives long lasting protection and minimal wear Rolled back profile to allow easy release of material Not for use in arduous waste rehandling application C Part Number Width (in) Width (mm) Capacity (m 3 ) Carriage Weight (kg) 980/88022 83 2110 0.75 Tool Carrier 670 980/89656 90 2286 0.90 Tool Carrier 863 980/89655 90 2286 0.90 Q Fit 910 Shear Grab Cuts grass and maize silage from the clamp ensuring high feed quality KV tines provide extra strength Heavy duty design for improved durability Part Number Width Width Capacity Carriage Further Weight (in) (mm) (m 3 ) Information (kg) 980/24900 66 1675 1.00 Q Fit KV Tines 475 980/36500 66 1675 0.80 Tool Carrier KV Tines 443 980/88008 66 1675 0.80 Pin & Cone KV Tines 450 JCB MID RANGE ATTACHMENTS Issue 1 C.13

LOADALL Single Bale Spike Suitable for handling round bales up to 1.8m diameter Single KV tine Anti-rotation tine for improved stability C Part Number Carriage Further information Weight (kg) 980/25200 Q Fit KV tines 75 980/36300 Tool Carrier KV tines 75 980/88011 Pin & Cone KV tines 80 Twin Bale Spike Suitable for handling two round bales up to 1.8m diameter Also capable of handling large square bales Features 6 KV tines for maximum bale stability Part Number Carriage Further information Weight (kg) 980/25000 Q Fit KV tines 120 980/36200 Tool Carrier KV tines 120 980/88010 Pin & Cone KV tines 120 C.14 JCB MID RANGE ATTACHMENTS Issue 1

LOADALL Wrapped Bale Clamp (single bale) Twin roller mounted on KV tines to allow unit to be used as twin spike Roller design eliminates damage to bale wrap C Part Number Carriage Further information Weight (kg) 980/25900 Q Fit KV tines (in rollers) 220 980/36600 Tool Carrier KV tines (in rollers) 220 980/88016 Pin & Cone KV tines (in rollers) 220 Grain Pusher Box section construction for extra durability Designed for placement of grain in storage Part Number Width Width Capacity Carriage Spec Weight (in) (mm) (m 3 ) (kg) 545/42300 90 2286? Q Fit 10 /3m Long 530 980/88005 90 2286? Tool Carrier 10 /3m Long 535 JCB MID RANGE ATTACHMENTS Issue 1 C.15

LOADALL Flat 8 Bale Grab Designed to pick up 8 standard bales at once Curved tines penetrate the bale to allow rehandling and stacking Hydraulically operated tines ensure the load is safely clamped C Part Number Sizes (mm) Spec Carriage Weight (kg) 980/40800 1000 x 1770 x 1800 8 Bale Tool Carrier 320 980/25700 1000 x 1770 x 1800 8 Bale Q Fit 320 Big Bale Grab Strongly built unit to withstand the arduous application Designed for the safe moving, stacking and loading of bales Hydraulically operated tines ensure the load is safely clamped Part Number Sizes (mm) Spec Carriage Weight (kg) 980/25600 1100 x 2400 x 1500 1-2 Bale Q Fit 450 C.16 JCB MID RANGE ATTACHMENTS Issue 1

LOADALL Big Bale Triple Grab Designed to pick up 3 x 800 bales or 2 x 1200 at once Curved tines penetrate the bale to allow rehandling and stacking Hydraulically operated tines ensure the load is safely clamped C Part Number Sizes (mm) Spec Carriage Weight (kg) 980/A5498 2510 x 2510 3 Bale Q Fit 350 Heston Bale Grab Strongly built unit to withstand the arduous application Designed for the safe moving, stacking and loading of up to 2 Hesston Bales Hydraulically operated tines ensure the load is safely clamped Part Number Sizes (mm) Spec Carriage Weight (kg) 980/88013 1530 x 1190 x 1260 2 Bale Q Fit 233 JCB MID RANGE ATTACHMENTS Issue 1 C.17

LOADALL Log Grab For safe handling of loose timber or sawn bundles Available with fixed or sliding forks to suit various applications Hydraulically operated twin rams ensure the load is safely clamped Available in a variety of hitch pick ups to suit a variety of machine applications C Part Number Width (in) Width (mm) Capacity Carriage Weight (kg) 980/88035* 41 1050 2.0 Q Fit 397 980/88036* 41 1050 2.0 Tool Carrier 390 980/88038** 41 1050 2.0 Tool Carrier 450 980/88037** 41 1050 2.0 Q Fit 445 * Fixed Fork ** Sliding Fork Combination Forks For handling bulk maure /silage with top grab to aid load retention Twin rams coupled to a sliding frame ensure load is cleared from the tines Available in various widths and capacities to suit carrier machine Part Number Width (in) Width (mm) Capacity Carriage Weight (kg) 980/35700 83 2110 1.5 Tool Carrier 700 980/60300 90 2290 1.7 Tool Carrier 720 980/24300 90 2290 1.9 Q Fit 740 C.18 JCB MID RANGE ATTACHMENTS Issue 1

LOADALL Round Bale Spike (with Push Off) Suitable for handling round bales up to 1.8m diameter Hydraulically operated push off plate enables safe handling of bales at maximum lift Anti-rotation tine for improved stability C Part Number Carriage Weight (kg) 980/25400 Q Fit 170 Box Tipper For the safe handling and tipping of boxes with full 180 rotation Maximum operating capacity of 1 tonne Adjustable side and top arm to maintain a steady load during tipping operation Part Number Carriage Weight (kg) 980/90609 Tool Carrier 615 980/90610 Q Fit 615 JCB MID RANGE ATTACHMENTS Issue 1 C.19

LOADALL Scraperblade C Suitable for light duty site and road clearance Incorporates 15 fixed angling to enable blade/road clearance Part Number Width Width Capacity Carriage Weight (in) (mm) (m 3 ) (kg) 545/44700 90 2290 N/A Q Fit 350 Snowblade Incorporates 25 ( to either side) fixed angling to enable road/blade clearance Fitted with replaceable rubber wear strip for protection against protruding ironwork 2290mm width with blade angled at 25º Additional jockey wheel aids in steadier travel/use Part Number Width Width Capacity Carriage Weight (in) (mm) (m 3 ) (kg) 980/89970 90 2290 N/A Q Fit 420 C.20 JCB MID RANGE ATTACHMENTS Issue 1

LOADALL Weld On Brackets Supplied as a pair ready for field fit Weld on bracket allow the conversion of direct mount shovels to quickhitch mount C Part Number Description Pick UP 980/88042 Weld On Brackets Q Fit 980/44700 Weld On Brackets Tool Carrier 980/88043 Weld On Brackets Compact 980/89852 Weld On Brackets Matbro P & C 980/89867 Weld On Brackets Manitou Quickhitch Carriage Allows the use of competitors attachments Matching weld on brackets available(see above) Part Number Machine Weight (kg) 160/14689 530 s, 540 s Manitou (Manual) 160/14801 530 s, 540 s Pin & Cone 332/D5164 526 Tool Carrier (Hydraulic) JCB MID RANGE ATTACHMENTS Issue 1 C.21

LOADALL Hydraulic Kits C Designed by JCB for JCB machines to give optimum performance Comprehensive fitting instructions and technical backup No invalidation of machine warranty Hydraulic Kits Air Conditioning Loadall Yes Note: Please check APS/Parts Pro for latest kits and older machine kits available C.22 JCB MID RANGE ATTACHMENTS Issue 1

406 GP Shovel Rolled back shell for easy material ejection Toeplate and side wear plates extend service life Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 273/00189 69 1750 0.80 General Purpose Optional 275 273/00139 75 1900 0.80 General Purpose Optional 305 273/00145 75 1900 1.00 General Purpose Optional 340 273/00146 75 1900 1.20 General Purpose Optional 360 273/00153 75 1900 1.40 General Purpose Optional 400 D Clam Shovel Twin ram design for extra power Toeplate to protect bucket shell Rear grading blade for longer wearing Part Number Width Width Capacity Duty Toeplate Weight (in) (mm) (m 3 ) kgs 273/00140 75 1900 0.75 General Purpose Bolt On 408 273/00148 75 1900 0.75 General Purpose No 408 JCB MID RANGE ATTACHMENTS Issue 1 D.1

406 Grain/Potato Shovel Toeplate level indicator aids the operator Substantial toeplate plus wear strips from the toeplate to the shovel back add protection in the major wear areas Rounded bar on the leading edges reduce potential damage to the crop D Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 980/90263 75 1900 1.20 Standard N/A 485 Industrial Forks and Frame Enables the machine to be utilised for loading and stacking Various fork length options available to reduce possible damage when stacking Supplied with certification (lift governed by machine capability) Part Number Length Length Class Description Weight (in) (mm) (kg) 273/00142 42 1067 2 Fork Frame and Forks 179* 273/00144 47 1200 2 Fork Frame and Forks 187* * Total weight of Forks and Frame D.2 JCB MID RANGE ATTACHMENTS Issue 1

406 Muck Fork and Grab 1395mm grab opening for maximum productivity Powerful twin top rams to give optimum penetration and tearout Curved tines allow operating close to walls Part Number Width (in) Width (mm) Duty Weight (kg) 980/90637 84 2140 Standard 505 Sweeper Collector D Part Number Width (in) Width (mm) Capacity (litres) Type Integral Tank 980/90515 82 2100 270 SC210 No 980/90516 82 2100 270 SC210 Yes * These Sweeper Collectors are used with Mounting Frame 980/90736, Gutter brush (Optional) Note: also fits 407 machine For additional information on Sweeper Collectors, refer to section E JCB MID RANGE ATTACHMENTS Issue 1 D.3

409 GP Shovel D Spill guard as standard to prevent material falling on the machine Toeplate to protect bucket shell Side wear plates prolongs bucket life Part Number Width Width Capacity Duty Teeth Weight (in) (mm) (m 3 ) (kg) 332/R9605 77 1950 1.0 GP N/A 332 332/R9607 77 1950 1.2 GP N/A 358 332/R9608 83 2100 1.4 GP N/A 399 332/R9610 87 2200 1.6 GP N/A 485 6 in 1 Shovel Twin ram design for extra power Toeplate to protect bucket shell Rear grading blade for longer wearing Part Number Width Width Capacity Toeplate Weight (in) (mm) (m 3 ) (kg) 332/R7792 77 1950 0.90 No Teeth 404 D.4 JCB MID RANGE ATTACHMENTS Issue 1

409 Industrial Forks and Frame Enables the machine to be utilised for loading and stacking Various fork length options available to reduce possible damage when stacking Supplied with certification (lift governed by machine capability) Part Number Length Length Class Description Weight (in) (mm) (kg) 332/S8343 42 1067 2 Fork Frame and Forks 178* 332/R9613 47 1200 2 Fork Frame and Forks 187* * Total weight of Forks and Frame D Sweeper Collector Full width sweeping with optional Gutter Brush Optional gutter brush and gutter water sprinkler system available Suitable for light and general duty Quickhitch mount for rapid changeover times Part Number Width (in) Width (mm) Type Integral Tank 980/90515 82 2100 SC210 No 980/90516 82 2100 SC210 Yes * The above Sweeper Collectors are used with Mounting Frame 980/90736, Gutter brush (Optional) For additional information on Sweeper Collectors, refer to section E JCB MID RANGE ATTACHMENTS Issue 1 D.5

SC210 & SC240 SWEEPER RANGE Heavy duty one piece canopy for superior structural strength Floating mounting frame allows the sweeper to follow the contours of the ground Optional internal water tank provides class leading visibility Hydraulically controlled collection hopper is operated from the cab Combination steel and polypropylene brush core for superior sweeping action Brush Specifications The brush core has a diameter of 590mm and is made up from a combination of polypropylene and steel segments The steel segments provide an aggressive sweeping action to lift dried on material whilst the flexibility of the polypropylene provides a superior sweeping and lifting action NOTE: Both models in the sweeper collector range require 40-60 l/min hydraulic oil flow E Basic Sweeper Collector SC210 SC240 Operating width (mm) 2100 2400 Overall width (mm) 2410 2724 Overall length without mounting bracket (mm) 2030 2040 Overall height (mm) 810 840 Operating weight without mounting frame (kg) 705 740 Hopper Capacity (ltr) 350 400 JCB MID RANGE ATTACHMENTS Issue 1 E.1

SC210 & SC240 SWEEPER RANGE Sweeper Collector with water sprinkler system SC210 SC240 Operating width (mm) 2100 2400 Overall width (mm) 2410 2724 Overall length without mounting bracket (mm) 2030 2040 Overall height (mm) 810 840 Operating weight without mounting frame (kg) 770 805 Hopper Capacity (ltr) 250 300 Water Tank Capacity (ltr) 320 370 Part Number Description Size (in) Size (mm) Note 980/90515 SC210 Sweeper Collector 82 2100 Mounting frame required 980/90516 SC210 with integral water tank 82 2100 Mounting frame required 980/90507 SC240 Sweeper Collector 94 2400 Mounting frame required 980/90508 SC240 with integral water tank 94 2400 Mounting frame required 980/89011 Mounting frame - Compact tool carrier SC210 only 980/89013 Mounting frame - Tool carrier 980/89012 Mounting frame - 2CX MkII 980/90417 Mounting frame - Backhoe 980/90418 Mounting frame - Pallet forks 980/90419 Mounting frame - Q fit 980/90420 Mounting frame - Q fit & forks 980/90736 Mounting frame - 406/407 combination SC210 only 980/89159 Gutter brush option Left hand 980/A3292 Gutter brush option Right hand E E.2 JCB MID RANGE ATTACHMENTS Issue 1

EARTH DRILL - Drive Heads & Flights Power Head - Hex Drive New Earthdrill form JCB Attachments, designed and built in house Three different models with drilling torques of 1500Nm, 3500Nm and 6000Nm are available Standard 2" hexagon drive with two mounting holes to accommodate various augers Supplied with hanger bracket, tail hoses and manual to suit the machine Part Number Max. recommended flight (Std) Capacity (Nm) Machine 980/A4162 12 /305mm Auger 1500 Micro 8008* 980/A4162 15 /380mm Auger 1500 Micro*, Micro Plus* 980/A4162 15 /380mm Auger 1500 Mini CX 980/A4162 18 /460mm Auger 1500 801, 8020X 980/A4309 30 /760mm Auger 3500 802, 803, 804 980/A4328 30 /760mm Auger 3500 8040, 8045 980/A4321 30 /760mm Auger 3500 1CX 980/A4327 36 /900mm Auger 6000 2CX 980/A3596 36 /900mm Auger 6000 3CX, 4CX, 8052, 806 980/A4324 36 /900mm Auger 6000 Robot 160, 170** 980/A4326 36 /900mm Auger 6000 Robot 190, 1110*** 980/A5115 36 /900mm Auger 6000 Loadall Q/Fit * 1.0m Flight length recommended, ** Mounting Frame 980/28400 Required *** Mounting Frame 980/68700 Required Hex Drive - Flight Short (39, 1000mm) F Suitable for loose to medium dense, fine to coarse sands, medium to soft clays Wide choice of diameters enables accurate hole sizing and minimal reinstatement Short length option is ideally suited to machines with reduced lift over problems Replaceable wearparts available for prolonged service life Part Number Size (in) Size (mm) Weight (kg) Duty Flight Length Teeth 980/A2020 6 160 15 Standard 39, 1000mm 2 980/A2022 9 230 28 Standard 39, 1000mm 3 980/A2024 12 300 38 Standard 39, 1000mm 4 980/A2026 15 380 45 Standard 39, 1000mm 6 JCB MID RANGE ATTACHMENTS Issue 1 F.1

EARTH DRILL - Drive Heads & Flights Hex Drive - Flight Standard (48, 1200mm) Suitable for loose to medium dense, fine to coarse sands, medium to soft clays Wide choice of diameters enables accurate hole sizing and minimal reinstatement Replaceable wearparts available for prolonged service life Part Number Size (in) Size (mm) Weight (kg) Duty Flight Length Teeth 980/A2019 6 160 19 Standard 48, 1200mm 2 980/A2021 9 230 39 Standard 48, 1200mm 3 980/A2023 12 300 52 Standard 48, 1200mm 4 980/A2025 15 380 60 Standard 48, 1200mm 5 980/A2027 18 460 80 Standard 48, 1200mm 6 980/A2028 24 600 126 Standard 48, 1200mm 8 980/A2029 30 760 148 Standard 48, 1200mm 9 980/A2030 36 900 200 Standard 48, 1200mm 11 Hex Drive - Heavy Duty (48, 1200mm) F Suitable for dense and medium dense coarse sands and sandy gravels: stiff to very stiff silts and clays Wide choice of diameters enables accurate hole sizing and minimal reinstatement Fully seam welded for more arduous tasks Replaceable tungsten wearparts available for prolonged service life Part Number Size (in) Size (mm) Weight (kg) Duty Flight Length Teeth 980/A2031 9 230 45 Heavy 48, 1200mm 4 980/A2032 12 300 58 Heavy 48, 1200mm 4 980/A2034 15 380 63 Heavy 48, 1200mm 6 980/A2035 18 460 92 Heavy 48, 1200mm 6 980/A2037 24 600 124 Heavy 48, 1200mm 8 980/A2038 30 762 141 Heavy 48, 1200mm 10 980/A2039 36 914 195 Heavy 48, 1200mm 12 F.2 JCB MID RANGE ATTACHMENTS Issue 1

EARTH DRILL - Drive Heads & Flights Hex Drive - Rock Duty (48, 1200mm) Suitable for dense and medium dense coarse sands and sandy gravels: stiff to very stiff silts and clays Wide choice of diameters enables accurate hole sizing and minimal reinstatement Fully seam welded for more arduous tasks Replaceable tungsten wearparts available for prolonged service life Part Number Size (in) Size (mm) Weight (kg) Duty Flight Length Teeth 980/A2040 12 300 49 Rock 48, 1200mm 12 980/A2042 18 460 91 Rock 48, 1200mm 16 Flight Recommendation Material Loose to medium dense fine to coarse sands, medium to soft clays Dense & medium dense coarse sands & sandy gravels, stiff to very stiff silt & clays Very dense &/or cemented sands, coarse gravel & cobbles Flight Standard Duty Heavy Duty Rock Duty Ancillaries Extension bar increases the depth that can be drilled by 1 metre Standard teeth are fitted on the Standard and Heavy duty flights as factory fit Carbide teeth/pilot bit can be retro fitted in place of the standard teeth for increased service life F Part Number Description 980/A2043 Extension Bar 39 /1000mm length 332/A2056 Standard Inner Tooth 332/A2055 Standard Outer Tooth 332/A2059 Standard Pilot Bit 332/A2058 Carbide Inner Tooth 332/A2057 Carbide Outer Tooth 332/A2060 Carbide Pilot Bit 332/A2061 Rock Tooth JCB MID RANGE ATTACHMENTS Issue 1 F.3

HAMMERMASTER HM165Q B C A D E Model A B C D E HM165Q 1190mm 330mm 270mm 140mm 200mm Durable solid body design provides optimum breaker protection Excellent power to weight ratio provides maximum performance Silenced as standard Supplied ready to use with hoses, moil and chisel Easy fitment onto JCB and non-jcb machines Sealed for life accumulator Applications: Utility work, building, construction and groundcare Carrier machines: 1CX, 8025, 8030, 8035, Robot 160, 170, 8020, Midi CX 1.9 to 4.5 tonnes Specifications: Ø 50mm tool 306J impact energy Blow rate 540 to 1080bpm Operating weight 120kg Part Number Description To fit 980/90453 HM165Q 1CX 980/90253 HM165Q 802,8027ZT,8032ZT, 980/90237 HM165Q 8025, 8030, 8035 980/90355 HM165Q Robot160,170* 980/A2706 HM165Q 8020 980/90867 HM165Q Midi CX 980/90256 HM165Q Universal G Notes: All HM165Q except the Universal hammers supplied ready to use with hoses, grease gun and cartridge, operators manual, moil and chisel HM165Q Universal hammers do not include hanger brackets or hoses *Requires frame 980/28400 JCB MID RANGE ATTACHMENTS Issue 1 G.1

HAMMERMASTER HM265Q B C A D E Model A B C D E HM265Q 1200mm 400mm 400mm 180mm 180mm Durable solid body design provides optimum breaker protection Excellent power to weight ratio provides maximum performance Sealed for life accumulator Silenced as standard Supplied ready to use with hoses, moil and chisel Easy fitment onto JCB and non-jcb machines Applications: Utility work, building and construction Carrier machines: 8030, 8035, 8040, 8045, 8055, 8065, 2CX, Robot 160, 170, 190, 1110 2.8 to 6 tonnes Specifications: Ø 65mm tool 516J impact energy Blow rate 480 to 1200bpm Operating weight 200kg Part Number Description To fit G 980/90241 HM265Q 2CX 980/90242 HM265Q 8030, 8035 980/90286 HM265Q 8040, 8045, 8055 980/90243 HM265Q 8065 980/90366 HM265Q Robot160,170, 190, 1110* 980/90257 HM265Q Universal Notes: All HM265Q except the Universal hammers supplied ready to use with hoses, grease gun and cartridge, operators manual, moil and chisel HM265Q Universal hammers do not include hanger brackets or hoses *Requires frame 980/28400 G.2 JCB MID RANGE ATTACHMENTS Issue 1

HAMMERMASTER HM385Q B C A D E Model A B C D E HM385Q 1110mm 440mm 400mm 180mm 180mm Durable solid body design provides optimum breaker protection Excellent power to weight ratio provides maximum performance Sealed for life accumulator Silenced as standard Supplied ready to use with hoses, moil and chisel Easy fitment onto JCB and non-jcb machines Applications: Utility work, building, construction and demolition Carrier machines: 3CX, 4CX, JZ70, 8065, 8080, Robot 190, 1110 4.5 to 9 tonnes Specifications: Ø 80mm tool 859J impact energy Blow rate 480 to 960bpm Operating weight 312kg Part Number Description To fit 980/90238 HM385Q 8065, 8080 980/90239 HM385Q 3CX, 4CX 980/90367 HM385Q Robot 190,1110* 980/90240 HM385Q JZ70 980/90258 HM385Q Universal G Notes: All HM385Q except the Universal hammers supplied ready to use with hoses, grease gun and cartridge, operators manual, moil and chisel HM385Q Universal hammers do not include hanger brackets or hoses *Requires frame 980/68700 JCB MID RANGE ATTACHMENTS Issue 1 G.3

HAMMERMASTER HM495Q B C A D E Model A B C D E HM495Q 1360mm 430mm 430mm 220mm 220mm Durable solid body design provides optimum breaker protection Excellent power to weight ratio provides maximum performance Sealed for life accumulator Silenced as standard Supplied ready to use with hoses, moil and chisel Easy fitment onto JCB and non-jcb machines Applications: Utility work, building, construction and demolition Carrier machines: 3CX, 4CX, JZ70, 8080. 6 to 12 tonnes Specifications: Ø 95mm tool 1058J impact energy Blow rate 390 to 780bpm Operating weight 419kg Part Number Description To fit G 980/90244 HM495Q 8080 980/90245 HM495Q 3CX, 4CX, 980/90246 HM495Q JZ70 980/90259 HM495Q Universal Notes: All HM495Q except the Universal hammers supplied ready to use with hoses, grease gun and cartridge, operators manual, moil and chisel HM495Q Universal hammers do not include hanger brackets or hoses G.4 JCB MID RANGE ATTACHMENTS Issue 1

HAND HELD BREAKERS T Pick and D Pick Breakers 15 kg T handle Pick 7 8" (22mm) 15 kg D handle Pick 7 8" (22mm) c/w latch retainer c/w screw retainer 15 kg D handle Pick 7 8" (22mm) c/w latch retainer Application Concrete, asphalt, or masonry breaking, ideal for trenching, tunnelling and lateral work. Light demolition and construction applications. The T and D pick breakers are small light weight hammers designed for light to medium duty breaking. The breakers are available with either T handles for vertical operation or with the popular D handle for horizontal work. A unique vibration damping system isolates the entire body shell which gives excellent protection to the operator. Sealed hydraulic system resulting in low noise T type or D type handles available Supplied with tail hoses and quick connect couplings D handle pick is available with either screw or latch type tool retainer Durable heavy duty housing and handles T handle pick Part Number Tool bit Flow range Pressure Weight Blow frequency Vibration level size range 929/30900 + 22 x 82 mm 15-22 lpm 50-65 bar 15 kg 1500 bpm 7.5 m/s 2 ** 7 8 x 3 1 4 in 3-5 gal 725-942 psi 33 lbs D handle pick Part Number Tool bit Flow range Pressure Weight Blow frequency Vibration level size range 929/12900* 22 x 82 mm 15-22 lpm 50-65 bar 15kg 1500 bpm 6 m/s 2 ** 929/30800 + 7 8 x 3 1 4 in 3-5 gal/min 725-942 psi 33 lbs * screw retainer + latch retainer ** single axis to BS8622-5 JCB MID RANGE ATTACHMENTS Issue 1 H.1 HG

HAND HELD BREAKERS HM22 and HM 25 Breakers HM22 HM25 22 kg Breaker 7 8" (22 mm) 25 kg Breaker 1 1 4" (32 mm ) Vibro damped Vibro damped 22 kg Breaker 1" (25 mm) Vibro damped Application Concrete, asphalt and rock breaking. Ideal for road repair and all round site work. The HM22 and HM25 are supplied as standard with anti-vibration handles, giving the breakers class leading low vibration levels. The HM22 is a medium duty breaker for general demolition, concrete and asphalt breaking. The HM25 is a popular breaker due to its powerful and versatile performance. When combined with the Beaver Powerpack it gives a highly efficient output within a light and compact package. Ideally suited for concrete, asphalt and rock breaking, a good general all round performing breaker. Robust cast steel construction Anti vibration handles give class leading low vibration levels Supplied with tail hoses and quick connect couplings Sealed system results in low noise, no exhaust port and elimination of freezing problems (with pneumatic) Durable heavy duty housing and handles H HM22 Part Number Tool bit Flow range Pressure Weight Blow frequency Vibration size range level 929/92500 22 x 82 mm 18-22 lpm 69-86 bar 21 kg 1500 bpm 3.4m/s 2 * 7 8 x 3 1 4 in 4-5gal/min 1000-1247 psi 46 lbs 929/92600 25 x 108 mm 18-22 lpm 69-86 bar 22 kg 1500bpm 3.4m/s 2 * 1 x 4 1 4 in 4-5gal/min 1000-1247 psi 48 lbs HM25 Part Number Tool bit Flow range Pressure Weight Blow frequency Vibration size range level 929/92400 32 x 160 mm 18-22 lpm 90-110 bar 26 kg 1500bpm 4m/s 2 * 1 1 4 x 6 1 4 in 4-5gal/min 1305-1595 psi 57 lbs * single axis to BS8662-5 H.2 JCB MID RANGE ATTACHMENTS Issue 1

HAND HELD BREAKERS NEW HM25LV Breaker Application Heavy duty breaking of concrete, asphalt and rock breaking combined with Ultra Low Hand Arm Vibration levels. Ideal for road repair and all round site work The HM25LV uses JCB patented technology to reduce Hand Arm Vibration whilst increasing the power. This breaker, when used with the Beaver powerpack gives the ultimate in terms of performance and ultra low HAV levels. Ultra low vibration system reduces Hand Arm Vibration Levels Improved operator comfort and control from the immediate response trigger Compact design making it easier to use and transport Practical handle protection gives long service life Handles are supported by an active hydraulic suspension system Part Number Tool bit Flow range Pressure Weight Blow frequency Vibration size range level 929/A2613 32 x 160 mm 18-22 lpm 90-110 bar 27 kg 1100-1300 bpm 1.6m/s 2 * 1 1 4 x 6 1 4 in 4-5 gal/min 1305-1595 psi 60 lbs * single axis to BS8662-5 JCB MID RANGE ATTACHMENTS Issue 1 H.3 H

HAND HELD BREAKERS HM29 Breakers 29 kg Breaker 1 1 4" (32 mm) 20 ltr vibro damped 29 kg Breaker 1 1 4" (32 mm) 30 ltr vibro damped Application Reinforced concrete breaking, heavy roadworks, asphalt breaking and general demolition work. High output applications. The HM29 is available as either 20 or 30L flow breaker. Both are heavy duty breakers designed to deliver the power and durability necessary for arduous and heavy duty hand held breaking. The anti-vibration handles ensure comfortable operation, whilst the large diameter piston delivers a strong powerful impact. For maximum impact energy the HM29 30L gives the best performance Robust cast steel construction Anti vibration handles give class leading low vibration levels Supplied with tail hoses and quick connect couplings Sealed system results in low noise, no exhaust port and elimination of freezing problems (with pneumatic) Durable heavy duty housing and handles HM29 20ltr Part Number Tool bit Flow range Pressure Weight Blow frequency Vibration size range level 929/92700 32 x 160 mm 18-22 lpm 90-110 bar 29 kg 1450 bpm 5m/s 2 * 1 1 4 x 6 1 4 in 4-5 gal/min 1305-1595 psi 64 lbs HM29 30ltr Part Number Tool bit Flow range Pressure Weight Blow frequency Vibration size range level 929/92900 32 x 160 mm 28-32 lpm 90-110 bar 29 kg 1500 bpm 5.9m/s 2 * 1 1 4 x 6 1 4 in 6-7 gal/min 1305-1595 psi 64 lbs * single axis to BS8662-5 H H.4 JCB MID RANGE ATTACHMENTS Issue 1

HAND HELD BREAKERS Breaker steels Breaker steels 1 1 4 (HM25, HM29 & HM25LV) Part Number 995/32915 Moil Part Number 995/32916 Chisel Part Number 995/32922 Tarmac cutter Part Number 995/32927 Clay spade Part Number 995/32928 Rammer pad stem Part Number 995/32914 Rammer pad Breaker steels 1 (HM22) Part Number PP/7310 Moil Part Number PP/7311 Chisel Part Number PP/7315 Tarmac cutter Part Number PP/7316 Clay spade Part Number PP/7313 Rammer pad stem Part Number PP/7314 Rammer pad Breaker steels 7 8 (HM22, D & T Pick) Part Number PP/1357 Moil Part Number PP/1358 Chisel Part Number PP/7321 Tarmac cutter Part Number PP/1360 Clay spade Part Number PP/7320 Rammer pad stem Part Number PP/7314 Rammer pad JCB MID RANGE ATTACHMENTS Issue 1 H.5 H

HAND HELD TOOLS Disc Cutter Application An ideal cutter for many work sites and most applications, well balanced and quite unit, it cuts most materials including metals, concrete and stone. Supplied complete with tail hoses and two cutting discs. Flow regulator to prevent over-speeding Adjustable safety guard No carburettor to clog with dust Accepts diamond blades Removable handle for right or left handed operation Part Number Disc cutter dia Disc centre hole dia Max cutting depth RPM 5024 300 mm 22 mm 102 mm 6000 @ 12 in 7 8 in 4 in 20 lpm Pressure range Flow range Height x width x length Weight Vibration 106-176 bar 18-21 lpm 320 x 260 x 650 mm 10kg 3.37 m/s 2 1500-2500 psi 4-4.6 gal/min 13 x 10 x 26 in 22 lbs 4 Submersible Trash Pump Application Rugged durable submersible pump used for pumping water with mud, leaves, twigs, sand, sewage and sludge in it. Used to handle matter that would clog most other pumps. Supplied without hoses. Greater lift height than suction pumps Self priming and run dry Unique combi seal - protects main pump seal 5000hrs seal bearings - minimal maintenance required Removable wear plate - protects pump housing Part Number Weight Discharge port Max discharge Max head Max operating Height x width pressure H 929/34300 32 kg 100 mm 2160 lpm 10.5 m 138 bar 511 x 480 mm (20ltr) 70 lbs 4 in 34 ft 2000 psi 20 x 31 in 929/34330 32 kg 100 mm 2640 lpm 15 m 138 bar 511 x 480mm (30ltr) 70 lbs 4 in 50 ft 2000 psi 20 x 31 in 929/34340 32 kg 100 mm 2880 lpm 17.12 138 bar 511 x 480mm (40ltr) 70 lbs 4 in 56 ft 2000 psi 20 x 31 in Hose options 929/34317 10m (4") BSP screw on lay flat hose 980/90632 10m Cam-loc lay flat hose (650/10301 required) 650/10301 Screw-on Cam-loc fitting for use with Cam-loc H.6 JCB MID RANGE ATTACHMENTS Issue 1

HAND HELD TOOLS Hydraulic Drill Application Delivers safe, steady power for all general drilling applications. Reversible drive - enables powering out of material Lightweight and compact for easy use Rugged gear motor for strength Heat insulated handle for safety Part Number Hole capacity (steel) Hole capacity (wood) Chuck RPM 5117 13 mm 27 mm 13 mm key 1000 @ 1 2 in 1 1 16 in 1 2 in 20 lpm Operating pressure Flow range Height x width x length Weight 70-141 bar 15-30 lpm 229 x 76 x 190 mm 2.7 kg 1000-2000 psi 4.2-5.5 gal/min 9 x 3 x 7 1 2 in 6 lbs Impact Drill Application Ideal for hammer drilling in concrete, brick, rock and other difficult to drill materials. Reversible drive - enables powering out of material Lightweight and compact for easy use Rugged gear motor for strength Heat insulated handle for safety Part Number Hole capacity Hole capacity Hole capacity Chuck RPM steel wood concrete 5118 13 mm 38 mm 19 mm SDS chuck bit shanks 805 @ 1 2 in 1 1 2 in 3 4 in 20 lpm Operating pressure Flow range Height x width x length Weight 70-141bar 19-25 lpm 248 x 89 x 305 3.9 1000-2000 psi 4.2-5.5 gal/min 9 3 4 x 3 1 2 x 12 in 8.5 lbs JCB MID RANGE ATTACHMENTS Issue 1 H.7 H

HAND HELD TOOLS 2 Submersible Pump Application High output pump with high delivery head ideal for pumping clear water. Supplied complete with 10m lay flat hose Self priming for speed of use Run dry without damaging the pump Lifting lug - enables safe easy placement Part Number Weight Discharge port Max discharge Max Max operating Height x head pressure width 929/03900 (20ltr) 8.3 kg 50 mm 700 lpm 18 m 100 bar 205 x 230 mm 18.3 lbs 2 in 154 gal/min 60 ft 1450 psi 8 x 9 in 929/04500 (30ltr) 8.5 kg 50 mm 800 lpm 18 m 100 bar 511 x 782 mm 18.7 lbs 2 in 176 gal/min 60 ft 1450 psi 8 x 9 in Hand held Earthdrill Hand held earthdrill Part Number 929/13400 4 Auger 1.2m length Part Number 929/13407 6 Auger 1.2m length Part Number 929/13408 8 Auger 1.2m length Part Number 929/13409 10 Auger 1.2m length Part Number 929/13410 12 Auger 1.2m length Part Number 929/13411 Auger flight tooth Part Number 929/13412 100mm Tip Part Number 929/13413 150-300mm Auger extension Part Number 929/13414 24 Extension Part Number 929/13428 Application Two man drill capable of drilling holes up to 12in diameter, portable and manoeuvreable as well as quiet in operation. Automatic return to neutral - safety device Reversible - for powering out of ground Hydraulic drive - more torque than most petrol units H Weight Capacity Hole depth Torque RPM Max pressure Height pressure 15 kg 305 mm 1220 mm 295 Nm 136@20 lpm 138 bar 1295 mm 34 lbs 12 in 48 in 217 lb/ft 2000 psi 51 in H.8 JCB MID RANGE ATTACHMENTS Issue 1

HAND HELD TOOLS Diamond Core Drill Application Designed to provide a unrivalled combination of power, flexibility and reliability for diamond core drilling, capable of drilling holes up to 4" diameter. Side handle for easy of use Rugged hydraulic motor - allows prolonged use Achieves clean cut on both sides of hole Water hose port for dust suppression Part Number RPM Bit size Weight Length Width Flow range Operating pressure 929/13200 600 70-125 mm 7 kg 410 mm 100 mm 15-25 lpm 100 bar 15.4 lbs 16 in 4 in 3.3-5.5 gal/min 1450 psi 929/13300 2400 15-25 mm 7 410 100 15-25 lpm 100 bar 15.4 lbs 16 in 4 in 3.3-5.5 gal/min 1450 psi Optional items Core Drill mini drill stand Part Number 929/13280 Bit Centering device Part Number 929/13271 1 1 4-1 2 adaptors (core drill) Part Number 929/13270 Hand Operated Water Pump Part Number 929/13250 Breast Plate Part Number 929/13261 929/13251 127mm dia x 450mm Long Core Bit 929/13253 107mm dia x 450mm Long Core Bit 929/13255 78mm dia x 450mm Long Core Bit 929/13256 65mm dia x 450mm Long Core Bit 929/13257 52mm dia x 450mm Long Core Bit 929/92130 Core Bit Extension 100mm 929/92132 Core Bit Extension 300mm JCB MID RANGE ATTACHMENTS Issue 1 H.9 H

JCB Attachments World Parts Centre, Waterloo Park Beamhurst, Uttoxeter, Staffordshire, England ST14 5PA Hotline: +44 (0) 1889 506047 Fax: +44 (0) 1889 506046 email: attachments.hotline@jcb.com www.jcb.com