Switching Expandable and space-saving switching power supplies. High efficiency reduces operation costs. 93% efficiency Plug-in output modules for additional output voltages Plug-in branch terminal module for additional terminals Power Range: 12W, 24W, 48W Input voltage: 1 to 24V AC (voltage range: 85 to 264V AC/11 to 35V DC) Up to 7ºC (158ºF) operating temperature DC low ED indicator and output contact The terminals are captive spring-up screws. Ring or fork terminals can be used. Finger-safe construction prevents electric shocks. Panel mount bracket and side-mount panel mounting bracket. Can be attached to a DI rail or directly to a panel surface. RoHS compliant U listed for Class 1, Division 2 Hazardous ocations Meets SEMI F47 Sag Immunity ABS Certified for maritime use PS6R Capacity* 12W Part o. Input Voltage Voltage 24W PS6R-G24 85 to 264V AC 21.6 to 26.4V 1A 48W 2A * voltage output current = output capacity Current 5A 37mm 6mm 85mm Applicable Standards Mark File o. or Organization U58 CSA C22.2 o. 17.1 E695-1 E5178 E6124-3 Part umbers C ISTED US U/c-U isted File o. E177168 TÜV SÜD EU ow Voltage Directive EMCD Accessories Item Part o. ote Voltage Expansion PS9Z-6RM1 : +5V, 2A, 1W Module ote 1 PS9Z-6RM2 : +12V, 1A, 12W PS9Z-6RM3 : +5V, 1A/-5V, 1A, 1W PS9Z-6RM4 : +15V,.4A/-15V,.4A, 12W PS9Z-6RM5 : +5V, 1A/+12V,.5A, 11W PS9Z-6RM6 : +12V,.5A/-12V,.5A, 12W ote 2 PS9Z-6RS1 Additional screw terminals for wiring: 2 + terminals / 2 - terminals Panel Mounting Bracket PS9Z-6R1F Side-mount Panel Mounting Supplied with M3 6 countersunk PS9Z-6R2F Bracket mounting screws DI Rail BD1 1,mm DI Rail End Clip B6 1. When using an output voltage expansion module, reduce 1A from the output current of PS6R. 2. When using a branch terminal module, the total voltage/current of PS6R and the branch terminal module should not exceed the rated current/voltage of PS6R OI Touchscreens PCs Automation Software Sensors Communication Barriers 12W shown with Branch Terminal module attached. 175151126 8-262-IDEC (4332) USA & Canada 167
Communication Sensors Automation Software PCs OI Touchscreens PS6R Input Supplementary Functions Dielectric Strength Specifications Part o. PS6R-G24 Input Voltage 1 to 24V AC (Voltage range: 85 to 264V AC/11 to 35V DC) (oad 8% at 85 to 1V AC, 11 to 14V DC) ote 1 Frequency 5/6Hz Input Current 1V AC 1.4A typ 2.7A typ 5.5A typ. 23V AC.7A typ 1.2A typ 2.3A typ. Inrush 1V AC 9A max. (Ta=25ºC, 1V AC cold start) Current 23V AC 2A max. (Ta=25ºC, 23V AC cold start) eakage 12V AC.5mA max. Current 23V AC 1mA max. Efficiency 1V AC 9% 9% 91% (Typical) 23V AC 9% 91% 93% Power Factor 1V AC.99.99.98 (Typical) 23V AC.96.97.97 Rated Voltage/Current 24V/5A 24V/1A 24V/2A Adjustable Voltage Range ±1% Holding Time 2ms min. (at rated input and output) Start Time 8ms max. (at rated input and output) Rise Time 2ms max. (at rated input and output) Regulation Total Fluctuation Input Fluctuation oad Fluctuation Temperature Change Ripple (including noise) ±5% max..4% max..6% max..5%/oc max. ( 1 to +6ºC) 1% p-p max. ( to +6ºC) 1.5% p-p max. ( 1 to ºC) Overcurrent Protection 15 to 12% (auto reset) (output current when voltage drops by 5%) Overvoltage Protection off at 12% ote 2 Operation Indicator Voltage ow Indication ED (green) ED (amber) Between input and output terminals 3V AC, 1 minute Between input and ground terminals 2V AC, 1 minute Between output and ground terminals 5V AC, 1 minute Insulation Resistance 1MΩ min. 5V DC megger (between input and output terminals/between input and ground terminals) (at room temperature and normal humidity) Operating Temperature 1 to +7ºC (no freezing) ote 3 Operating Humidity 2 to 9% RH (no condensation) Storage Temperature 25 to +75ºC (no freezing) Storage Humidity 2 to 9% RH (no condensation) Vibration Resistance 1 to 55 Hz, amplitude.375 mm (.187mm using PS9Z-6R1F) 2 hours each in 3 axes, 6 directions Shock Resistance 3 m/s 2 (15 m/s 2 when using a PS9Z-6R1F panel mounting bracket) EMC EMI E6124-3 (Class B) EMS E6124-3 (industrial) Degree of Protection IP2 (IEC 6529) Weight (approx.) 63g 96g 14g Terminal Screw M3.5 (See last page for wire sizes) 1. DC input voltage is not subjected to safety standards. 3. See the output derating curves. 2. One minute after the output has been turned off, turn on the input again. Easily Expandable Barriers Voltage Expansion Module In addition to the standard 24V output, additional 5, 12, and 15V outputs can be added. Two terminals can be added. o wiring is required, reducing installation space. 168 www.idec.com 175151126
Accessories (For use with PS6R) Part o. Voltage Expansion Module PS9Z-6RM1 PS9Z-6RM2 PS9Z-6RM3 PS9Z-6RM4 PS9Z-6RM5 PS9Z-6RM6 PS9Z-6RS1 Input Voltage 24V DC Capacity 1W max. 12W max. 1W max. 12W max. 11W max. 12W max. Rated Voltage/Current 5V/2A 12V/1A ±5V 2A ±15V.4A 5V/1A, 12V/.5A ±12V.5A 24V/1A max. ote 1 Adjustable Voltage Range ot available Voltage Accuracy ±5% max. Start Time 2 ms max. (at rated input and output) Input Fluctuation.5% max. Supplementary Functions Regulation oad Fluctuation Temperature Change Ripple (including noise) Overcurrent Protection 1.% max..5%/max. ( 1 to +6 C) 1mV max. 15mV max. 1mV max., 15mV max. 15% (auto reset) Overvoltage Protection off at 12% Operating Temperature 1 to +7 C (no freezing) ote 2 Operating Humidity 2 to 9%RH (no condensation) Storage Temperature 25 to +75 C (no freezing) Storage Humidity 2 to 9% RH (no condensation) Vibration Resistance 1 to 55 Hz, amplitude.375 mm, 2 hours each in 3 axes, 6 directions (in combination with ) Shock Resistance 3 m/s 2 (15 m/s 2 when using a PS9Z-6R1F panel mounting bracket), 3 shocks each in 6 axes (in combination with ) EMC EMI E6124-3 (Class B) (in combination with PS6R- 24) EMS E6124-3 (industrial) (in combination with PS6R- 24) Safety Standards U58 (isting), CSA C22.2 o.17.1, IEC/E695-1, E5178 (in combination with PS6R- 24) Degree of Protection IP2 (IEC 6529) Weight (approx.) 9g 3g Terminal Screw M3.5 (See last page for wire sizes.) 1. Ensure that the current does not exceed the rated current of the PS6R. 2. See the output derating curves. Wide Operating Termperature Range Current (%) 1 9 8 7 6 5 4 3 2 1 Operates without derating at to 6ºC Operates at 1 to 7ºC 1 1 2 3 4 5 6 7 Operating Temperature ( C) Easy Maintenance - ED Indicator Status ormal Overload or Input Voltage ow* DC O (green ED) DC ow (amber ED) *The EDs turn on when the input voltage drops. short-circuit OFF Energy-saving 93% Efficiency (48W) Efficiency (%) 96 94 92 9 88 86 84 82 8 5 1 15 2 25 3 Input Voltage (V AC) Competitor A Competitor B OI Touchscreens PCs Automation Software Sensors Communication Barriers 175151126 8-262-IDEC (4332) USA & Canada 169
Dimensions (mm) OI Touchscreens 6 - M3.5 Terminal Screws 9.3 16.5 A A 4 35.3 44.9 PS6R-G24 8 - M3.5 Terminal Screws 16.5 9.3 A A 4 35.3 44.9 16.5 9.3 1-M3.5 Terminal Screws A A 4 35.3 44.9 PCs 37 A = 9.5 3.8 4.5 A A A A 6 A = 9.5 3.8 4.5 A A A A A A 85 A = 9.5 3.8 4.5 PS9Z-6R1F Panel Mounting Bracket 28 4-M4 or ø4-4.5 holes When a PS9Z-6R1F is installed on PS6R A A 13.6 1 Sensors 1 Automation Software 135 145 135 145 28 39 28 Panel cut-out PS9Z-6R2F (Side-mount Panel Mounting Bracket) 56 4-M4 or ø4-4.5 holes (Front view) (Side view) When a PS9Z-6R2F is installed on PS6R B C 4-M4 or 4-ø4.5 holes D 138.5 148.6 138.5 148.6 11.8 56 7 56 Panel cut-out (Front view) 11.8 (Side view) Mounting Screws (M3 6 countersunk screw) Communication When using a PS9Z-6RM* Voltage Expansion Module When using a PS9Z-6RS1 Dimension Table A B C D E 39.3 29.5 29.5 58 Barriers 59 59 53 34.4 9.3 9.6 PS6R-G24 1.5 62.3 29.5 31 81 23 87.3 29.5 31 16 Mounting Screws 17.2 Mounting 27.8 Screws 21 33.4 E 17 www.idec.com 175151126
The PS6R should be placed in a proper enclosure. It is designed to be used with general electrical equipment and industrial electric devices. Operation otes 1. interruption may indicate blown fuses. Contact IDEC. 2. The PS6R contains an internal fuse for AC input. When using DC input, install an external fuse or DC input. To avoid blown fuses, select a fuse in consideration of the rated current of the internal fuse. Rated Current of Internal Fuses Part o. Internal Fuse Rated Current 4A PS6R-G24 6.3A 1A -- Avoid overload and short-circuit for a long period of time, otherwise internal elements may be damaged. -- DC input operation is not subjected to safety standards. Installation otes The PS6R can be installed in the direction shown below only. Up Vertical When using PS9Z-6R1F Panel Mounting Bracket When using PS9Z-6R2F Side-mount Panel Mounting Bracket Do not close the top and bottom openings of the PS6R to allow for heat radiation by convection. Maintain a minimum of 2mm clearance around the PS6R, except for the top and bottom openings. When derating of the output does not work, provide forced air-cooling. Make sure to wire the ground terminal correctly. For wiring, use wires with heat resistance of 6ºC or higher. Use copper wire of the following sizes. Wires of the following sizes must be used to comply with U58, CSA C22.2 o. 17.1. Model Terminal Wire Size/o. of Wire Wire Type Input 18-14 AWG, 1-wire 18-14 AWG, 1-wire, (18 AWG - 7A, PS6R-G24 16 AWG - 1A, 14 AWG - 15A) DC OK 22-14 AWG, 1-wire (stripped wire length: 6 to 7mm) Input 18-14 AWG, 1-wire 18-14 AWG, 2-wire Use the same size wire for each terminal (18 AWG - 7A, 16 AWG - 1A, 14 AWG - 15A) DC OK PS9Z-6R 12 AWG, 1-wire 22-14 AWG, 1-wire (stripped wire length: 6 to 7mm) 18-14 AWG, 1-wire (18 AWG - 7A, 16 AWG -1A, 14 AWG - 15A) Copper Solid/Stranded Copper Solid/Stranded Use with U-listed ring/ fork crimp terminal. Copper Solid/Stranded Operating Instructions Torque, in-ibs ( m) 7. (.8) 7. (.8) Applicable Crimp Terminal ø3.6 min. (reference) 6.6 max. 4 max. 5.5 min. Recommended tightening torque of the input and output terminals is.8 m. The output voltage can be adjusted within ±1% of the rated output voltage by using the V.ADJ control. ote that overvoltage protection may work when increasing the output voltage. When large shocks or heavy vibrations on the PS6R are expected, the use of DI rail or PS9Z-6R2F side-mount panel mounting bracket is recommended. Series Operation The following series operation is allowed. Connect Schottky barrier diodes as shown below. voltage expansion modules cannot be connected in series. (a) oad oad Select a Schottky diode in consideration of the rated current. The diode s reverse voltage must be higher than the PS6R s output voltage. Parallel Operation Parallel operation is possible to increase the output capacity. voltage expansion modules cannot be connected in series. oad When increasing the capacity, observe the following. 1. Maintain the operating temperature below 4ºC. 2. cannot be connected directly in parallel operation. Connect a diode to the output of each PS6R. 3. terminal voltage of both power supplies must be the same. Also, maintain the voltage difference between the power supplies below 3mV. 4. Use load lines of the same diameter and length. 5. Set the output voltage higher for the amount of diode forward voltage drop. 6. Turn on the inputs at the same time. 7. Select a diode in consideration of: Diode s reverse voltage must be higher than the PS6R s output voltage. Diode s current must be three times the PS6R s output current. Provide a heat sink for heat dissipation. (b) oad OI Touchscreens PCs Automation Software Sensors Communication Barriers 175151126 8-262-IDEC (4332) USA & Canada 171
OI Touchscreens PS6R-6RM1/M2/M3 Voltage Expansion Module PS9Z-6RM3/M4/M6 Voltage Expansion Module PS6R-6RS1 PCs Automation Software (PS6R-6RM5 shown) PS6R- 24/PS9Z-6RS1 Marking ame Description, Input Terminal Voltage range: 85 to 264V AC/11 to 35V DC Ground Terminal Be sure to connect this terminal to a proper ground., DC Terminals : Positive output terminal : egative output terminal VR.ADJ Voltage Adjustment Allows adjustment within ±1%. Turning clockwise increases the output voltage. DC O Operation Indicator (green) ights on when the output voltage is on. DC OW ow Indicator (Amber) ights on when the output voltage drops approximately 8% of the rated value. DC OK DC OK ights on when the output voltage is more than 8% of the rated value. P transistor output (5V DC max., 5 ma max.) PS9Z-6RM Marking ame Description +5V, +12V, +15V DC Terminal +5V side, +12V side, +15V side -5V, -12V, -15V DC Terminal -5V side, -12V side, -15V side COM DC Terminal V side (wired internally to of PR6R-J24) Sensors Communication Barriers Characteristics Operating Temperature vs. Current (Derating Curves) Current (%) 1 9 8 7 6 5 4 3 2 1 1 1 2 3 4 5 6 7 Operating Temperature (ºC) Current vs. Input Voltage (Derating Curves) (Ta=25ºC) 1 9 8 7 6 5 4 3 2 1 (ACV) 85 1 (DCV) 11 14 Operating Temperature approved by Safety Standards Part o. U58, CSA C22.2 o. 17. 1 E695-1, E5178 6ºC 6ºC PS6R-G24 6ºC 6ºC 55ºC 6ºC PS9Z-6R 55ºC 6ºC Current (%) Input Voltage(V) 264 35 1 Voltage (%) Overcurrent Protection Characteristics Overcurrent Protection PS6R- 24 Characteristics PS9Z-6RM* Pulse Current (Approx. 3A rms, 4A peak) Input Current (%) 15% 1 12% 95% F24 G24 J24 24 172 www.idec.com 175151126
PS6R- 24/PS9Z-6RS1 Marking ame Description PS6R-6RM1/M2/M3 Voltage Expansion Module Parts Description, Input Terminal Voltage range: 85 to 264V AC/11 to 35V DC PS9Z-6RM3/M4/M6 Voltage Expansion Module (PS6R-6RM5 shown) Ground Terminal Be sure to connect this terminal to a proper ground., DC Terminals : Positive output terminal : egative output terminal VR.ADJ Voltage Adjustment Allows adjustment within ±1%. Turning clockwise increases the output voltage. DC O Operation Indicator (green) ights on when the output voltage is on. DC OW ow Indicator (Amber) ights on when the output voltage drops approximately 8% of the rated value. DC OK DC OK ights on when the output voltage is more than 8% of the rated value. P transistor output (5V DC max., 5 ma max.) PS9Z-6RM Marking ame Description +5V, +12V, +15V DC Terminal +5V side, +12V side, +15V side -5V, -12V, -15V DC Terminal -5V side, -12V side, -15V side COM DC Terminal V side (wired internally to of PR6R-J24) Operating Temperature vs. Current (Derating Curves) Current (%) 1 9 8 7 6 5 4 3 2 1 1 1 2 3 4 5 6 7 Operating Temperature (ºC) Current vs. Input Voltage (Derating Curves) (Ta=25ºC) 1 9 8 7 6 5 4 3 2 1 (ACV) 85 1 (DCV) 11 14 Current (%) Input Voltage(V) Operating Temperature approved by Safety Standards Part o. U58, CSA C22.2 o. 17. 1 E695-1, E5178 6ºC 6ºC PS6R-G24 6ºC 6ºC 55ºC 6ºC PS9Z-6R 55ºC 6ºC Characteristics 264 35 1 PS6R-6RS1 Overcurrent Protection Characteristics PS6R- 24 Overcurrent Protection Characteristics PS9Z-6RM* Voltage (%) Pulse Current (Approx. 3A rms, 4A peak) Input Current (%) 15% 1 12% 95% F24 G24 J24 24 OI Touchscreens PCs Automation Software Sensors Communication Barriers 175151126 8-262-IDEC (4332) USA & Canada 173