CERTIFICATE OF ACCREDITATION

Similar documents
CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION

Re: Extension for ISO/IEC 17025: 2005 accreditation Certificates #ACT-1997, ACT , ACT & AT

CERTIFICATE OF ACCREDITATION

Certificate of Accreditation

Certificate of Accreditation

Certificate of Accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

CERTIFICATE OF ACCREDITATION

Certificate of Accreditation

CERTIFICATE OF ACCREDITATION

IGS-M-CH-044-1(0) Sept IGS. Iranian Gas Standards !" #$%&' () Insulating Oils for use in Power Transformers Part 1

Scope of testing. State: March Contents: siemens.com/energy

CERTIFICATE OF ACCREDITATION

SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009

Certificate of Accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SAFETY AND COMPLIANCE TESTING FOR SURESTOP

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Certificate of Accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Certificate of Accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Certificate of Accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Certificate of Accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

10.6 Scope of Accreditation

Certificate of Accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Certificate of Accreditation

Certificate of Accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Certificate of Accreditation

Certificate of Accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ZF GLOBAL ELECTRONICS- VALIDATION LABORATORY Carl-Spaeter-Str. 8 Koblenz, Germany 56070

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL

Certificate of Accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. SCHAP LABORATORY SERVICES, LLC Taft Road, Unit 5 Spring Lake, MI Erik Johnson Phone:

Annex no. 1 of Accreditation Certificate no. LI 333 from

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI Kevin Wendt Phone: MECHANICAL

ACCREDITED LABORATORY

Technical Webinar FSSC Q. Jules Rojer, Technical Advisor FSSC 22000

SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock

CERTIFICATE OF ACCREDITATION

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Renewable Fuels Association One Massachusetts Ave. NW Suite 820 Washington, DC Telephone: (202) Fax: (202)

INTERNATIONAL STANDARD

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Certificate of Accreditation

Softening point by Ring & Ball. Density and relative density of liquids by Hubbart pycnometer

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. UL 2528 Cathy Ln Jasper, IN Brian Truelove Phone: MECHANICAL

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Specifications for Refrigerants

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELECTRICAL

Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan.

September 16, 2016 VIA . UL Verification Services Inc. Arthur Rumpf 1559 King Street Enfield CT 06082

Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Certificate of Accreditation

Transcription:

CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that has been assessed by ANAB and meets the requirements of international standard ISO/IEC 17025:2005 while demonstrating technical competence in the field of TESTING Refer to the accompanying Scope of Accreditation for information regarding the types of tests to which this accreditation applies. AT-2125 Certificate Number Certificate Valid: 03/08/2017-03/08/2019 Version No. 001 Issued: 03/08/2017 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Contact: Denis Lafrance Phone: 514-739-1967 Email: dlafrance@morganschaffer.com Website: www.morganschaffer.com TESTING Valid to: March 8, 2019 Certificate Number: AT-2125 I. Chemical- Items, Materials or Products Tested Specific Tests or Properties Measured Specification, Standard Method, or Technique Used Key Equipment or Technology* Corrosive Sulfur ASTM D1275 Oven, Cu strip, Tarnish Chart Specific Gravity ASTM D1298 Hydrometer Color of petroleum products ASTM D1500 ASTM Color Scale Visual examination ASTM D1524 Visual Examination Moisture by Karl-Fisher titration ASTM D1533 Karl Fisher Titrator Dielectric Breakdown ASTM D1816 VDE Electrode Dissolved Gas Analysis ASTM D3612 Gas Chromatograph (GC) PCB in oil ASTM D4059 Gas Chromatograph (GC) Version 001 Issued: 03/08/2017 Page 1 of 2

Items, Materials or Products Tested Specific Tests or Properties Measured Inhibitors content: Specification, Standard Method, or Technique Used Key Equipment or Technology* 2,6-Ditertiary-Butyl Para-Cresol and 2,6- Ditertiary-Butyl Phenol in Insulating Liquids ASTM D4768 Gas Chromatograph (GC) Furanic compounds ASTM D5837 High Performance Liquid Chromatograph (HPLC) Dielectric Breakdown Voltage ASTM D877 Disk Electrodes Power Factor ASTM D924 Power Factor Device Interfacial Tension ASTM D971 Tensiometer Total Acid number ASTM D974 Acid-Base Titration Moisture in oil content WI 017-00 Water Sensor Notes: 1. * = as applicable. 2. This scope is formatted as part of a single document including Certificate of Accreditation No. AT-2125. Version 001 Issued: 03/08/2017 Page 2 of 2

CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Morgan Schaffer Inc. 8300 Saint-Patrick Street, Suite 15 LaSalle, QC H8N 2H1 has been assessed by ANAB and meets the requirements of international standard ISO Guide 34:2009 while demonstrating technical competence in the field of Reference Material Producer Refer to the accompanying Scope of Accreditation for information regarding the types of materials to which this accreditation applies. AR-2126 Certificate Number Certificate Valid 03/08/2017-03/08/2019 Version No. 001 Issued: 03/08/2017

SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 Contact: Denis Lafrance Phone: 514-739-1967 Email: dlafrance@morganschaffer.com Website: www.morganschaffer.com REFERENCE MATERIAL PRODUCER Valid to: March 8, 2019 Certificate Number: AR-2126 Category and Sub-Category of Reference Material Gases (Certified Reference Material) Moisture (Certified Reference Material) A7.1 A3.5 ILAC RM Category Class or Type of Reference Materials Produced (Include Range Where Applicable) Gas mixture in dielectric fluids (5, 10, 50, 100, 500 and 1000 ppm (μg/g) of H 2, CH 4, C 2H 6, C 2H 4, C 2H 2, CO 2, O 2, N 2, and CO) Moisture in dielectric fluids. 15 and 30 ppm (μg/g) Methods or Techniques Used in the RMP Laboratory (if Appropriate) Gas Chromatography Karl Fisher Titrator Notes: 1. Please contact the RMP organization for more information on CRM uncertainty values, Ucrm values, and other specific lot values. Some of this information may also be available on the RMP s website. 2. This scope is formatted as part of a single document including Certificate of Accreditation No. AR- 2126 Version 001 Issued: 03/08/2017 Page 1 of 1