Chain MicroSpan Chain 1 27 SpanTech LLC
Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket... 9 Special One-Piece Sprockets... MicroSpan One-Piece Sprocket Specifications... Standard Sprocket Layout... 11 MicroSpan Sprocket Mounting Specifications... 12 NOTE ON TORQUE VALUES... 13 NOTE ON MAXIMUM LOAD VALUES FOR 6MM RAISED CHAIN... 13 Maximum Load and Torque Ratings... 14 Maximum Load and Torque Ratings 4mm Flat Top Chain (U.S. Units)... 14 Maximum Load and Torque Ratings 4mm Flat Top Chain (Metric Units)... 1 Maximum Load and Torque Ratings 4mm Raised Chain (U.S. Units)... 16 Maximum Load and Torque Ratings 4mm Raised Chain (Metric Units)... 17 Maximum Load and Torque Ratings 6mm Raised Chain (U.S. Units)... 18 Maximum Load and Torque Ratings 6mm Raised Chain (Metric Units)... 19 27 SpanTech LLC 2
MicroSpan Chain Overview SpanTech has developed a new concept in plastic chains. MicroSpan chain was developed for the company s Powered Transfer program. Powered Transfers are devices that fill the space between the end of one conveyor and the next. They are used when end to end product movement is required and conventional chutes or idler rollers will not work. To learn more about SpanTech s Powered Transfer program, visit our website at www.spantechllc.com. MicroSpan Chain Types MicroSpan chain is made of acetal plastic, and has a charcoal grey color. It is a very small, all-metric design available in 4mm (.16 ) and 6mm (.24 ) thicknesses. It has a mm (.2 ) chain pitch (below). All types of MicroSpan chain have a mm pitch mm (.2 ) 3 27 SpanTech LLC
There are four basic types of MicroSpan chain: 4mm Flat Top, 4mm Raised High Friction, 6mm Raised High Friction, and now 6mm Flat Top. 4mm Flat Top MicroSpan (below). This chain is 4mm (.16 ) thick and features a smooth surface. FLOW 4mm Raised High Friction MicroSpan (below). This chain is 4mm (.16 ) thick and has raised points on its surface. It is used on inclines where the product surface is soft and the points can aid in gripping the product. Note the open rod segments in the photo (below); the drive sprocket teeth interface with and drive the chain at this point. This open feature allows more debris to pass through the chain. FLOW 27 SpanTech LLC 4
6mm Raised High Friction MicroSpan (below). Used in applications where a stronger chain is required; 6mm chain is more than twice as strong as 4mm chain. FLOW 6mm Flat Top MicroSpan (below). The 6mm chain available in a Flat Top design. FLOW 27 SpanTech LLC
The Nose Bar MicroSpan chain is designed to run on a small Nose Bar. The Bar thickness is 6mm (.24 ) with a 3mm (.12 ) radius on the end. 4mm Chain 6mm Chain 6mm Nose Bar 14mm (. ) 6mm Nose Bar 18mm (.71 ) 6mm (.24 ) The Nose Bar (above) has been developed by SpanTech to withstand the high wear and heat generated by the application. The Nose Bar is made of extruded #663 aircraft grade aluminum. The extrusion is drilled and countersunk, then hard plated with a nickel alloy. This nickel plating can withstand high pressure washdown applications. 27 SpanTech LLC 6
Nose Bar (typical) NOSE BAR SECTION VIEW 119mm (4.68 ) 3.13mm (.12 ) 6mm (.24 ) R1mm (.9 ) 38.7mm (1.2 ) 26.4mm (1.4 ) DRILLED AND COUNTERSUNK FOR #-32 FHCS 6mm (.24 ) FLAT BAR 6.3mm x 2.4mm (1/4 x 1 ) NOSE BAR (STOCK EXTRUSION) 93mm (36.6 ) 6mm (2.36 ) 1mm (.9 ) 7 27 SpanTech LLC
Chain Fabrication MicroSpan chain has a snap fit design. One side of the link has a hook; the other side has a pin (below). There is no independent rod. 1mm (.9 ) The chain elements are molded in two lengths: 6mm (2.36 ) and 12mm (4.72 ). The width module (above) is 1mm (.9 ). The chain is assembled in a brickwork pattern. The standard width for MicroSpan stock is 3mm (11.81 ); a standard roll is 1.24m ( ft.) in length. Chain Widths MicroSpan chain stock is 3mm (11.81 ) wide, and is cut to width on a conventional table saw. Span Tech uses a special blade, but conventional carbide-tipped wood blades can also be used. A top piece is used to hold down the chain and ensure a smooth cut. SpanTech uses a power feeder for additional safety and convenience. Chain Chain 27 SpanTech LLC 8
The chain can be cut to widths starting at 9mm (3.4 ) and increasing in 1mm (.9 ) increments. Effective chain widths greater than 3mm can be achieved by combining the 3mm (11.81 ) chain with an additional chain (9mm [3.4 ] shown as example, below), with a 2mm (.8 ) gap in between. 3mm 2mm 9mm In this way, a given facility can have many different MicroSpan conveyor widths, all made with the same convenient, single-width product. MicroSpan Sprockets Metric 9mm mm 12mm 13mm 1mm 16mm 18mm 19mm 2mm 22mm 24mm 2mm 27mm 28mm 3mm English 3.4 4.13 4.72.31.9 6. 7.9 7.68 8.27 8.86 9.4.4.63 11.22 11.81 Standard Split Sprocket The standard MicroSpan Sprocket is a two-piece, bolt-together design. The 44-tooth sprocket is made of Nylon, and has a light beige color. It is available in two bore sizes: 31.7mm (1.2 ) and 2mm (.79 ). The two sprocket halves are identical. Two Bore Sizes 31.7mm Bore 2mm Bore Pitch Diameter 7.8mm (2.76 ) 17.6mm (.69 ) 4-4 x 3/4 SHCS 31.7mm (1.2 ) +.2 / -. 4mm Drive Pin 2mm (.79 ) +.mm / -.mm 9 27 SpanTech LLC
Special One-Piece Sprockets SpanTech can provide machined one-piece sprockets for various applications. 4mm Drive Pin 18-tooth one-piece sprocket MICROSPAN ONE-PIECE SPROCKET SPECIFICATIONS Number of Teeth Pitch Diameter Outside Diameter Standard Bore +.mm / -.mm (+.2" / -.") 29 46.24mm (1.826") 48.97mm (1.928") 31.7mm (1.2") 28 44.6mm (1.781") 47.37mm (1.86") 31.7mm (1.2") 27 43.7mm (1.696") 4.77mm (1.82") 2.4mm (1.") 26 41.48mm (1.6331") 44.17mm (1.739") 2.4mm (1.") 2 39.89mm (1.76") 42.7mm (1.676") 2.4mm (1.") 24 38.3mm (1.81") 4.97mm (1.613") 2.4mm (1.") 23 36.72mm (1.446") 39.37mm (1.") 19.mm (.7") 22 3.13mm (1.3832") 37.77mm (1.487") 19.mm (.7") 21 33.4mm (1.327") 36.17mm (1.424") 19.mm (.7") 2 31.96mm (1.283") 34.7mm (1.361") 19.mm (.7") 19 3.37mm (1.199") 32.94mm (1.297") 12.7mm (.") 18 28.79mm (1.1336") 31.34mm (1.234") 12.7mm (.") 17 27.21mm (1.712") 29.74mm (1.171") 12.7mm (.") 16 2.63mm (1.9") 28.12mm (1.7") 12.7mm (.") 27 SpanTech LLC
STANDARD SPROCKET LAYOUT 9MM (3.4 ) THROUGH 3MM (11.81 ) S 1mm (.9 ) typical (3.4 ) (4.13 ) (4.72 ) (.31 ) (.9 ) (6. ) (7.9 ) (7.68 ) (8.27 ) (8.86 ) (9.4 ) (.4 ) (.63 ) (11.22 ) (11.81 ) 11 27 SpanTech LLC
MICROSPAN SPROCKET MOUNTING SPECIFICATIONS Sprocket Locations on Shaft.4 +. 13.84mm +2.4mm -. [ -.mm ]. POSITION 1 ±.1 [±.2mm] POSITION 2 ±.1 [±.2mm] POSITION 3 ±.1 [±.2mm] O.161 [4.9mm] (#2 DRILL) ALL HOLES MUST BE ALIGNED AND PERPENDICULAR TO SHAFT AXIS Chain Widths Exceeding 3mm 3mm 2mm MINIMUM SPACING BETWEEN CHAINS 27 SpanTech LLC 12
MicroSpan Transfer Standard Configuration MicroSpan Chain Back bend limit is 31.7mm (1.2 ) NOTE ON TORQUE VALUES All torque values provided on the following pages are based upon a MicroSpan Transfer having a standard chain path configuration (above). The stated values reflect the maximum operational torque. Any variations or modifications of the standard configuration will alter the actual torque values. Consult SpanTech for information regarding applications greater than 3mm (11.81 ) in width. NOTE ON MAXIMUM LOAD VALUES FOR 6MM RAISED CHAIN The Maximum Load data for 6mm Raised Chain, shown on pages 18 and 19, is based on the actual performance of a MicroSpan test conveyor that is 2.29m (7. ft.) in length. The test conveyor has a center drive and standard plated aluminum nose bars on each end. A dead load is applied to the midpoint of the unit; the load is held in accumulation. Torque is measured with a dynamometer. The Maximum Load values shown in the charts are based on 4 percent of the failure point. The center drive has standard 44- tooth sprockets on standard spacing. The chain wrap on the drive sprocket ranges from 113 degrees to 138 degrees. 13 27 SpanTech LLC
Maximum Load and Torque Ratings U.S. STANDARD UNITS 4MM FLAT TOP CHAIN 3.4 THROUGH 11.81 WIDTHS 4 3 2 3 2 2 1 2 2 1 7 14 18 3.4 4.72.9 7.9 8.27 9.4.63 11.81 4 3 Max. product load (lbs) @ fpm 13 3.4 4.72.9 7.9 8.27 9.4.63 11.81 3.4 4.72.9 7.9 8.27 9.4.63 11.81 27 SpanTech LLC 14 12 7 21 Max. product load (lbs) @ fpm 14 Max. product load (lbs) @ 1 fpm 8 4 12 Torque (in-lbs) 14 8 6 26 17 14 17 Torque (in-lbs) Torque (in-lbs) 7 3 2 16 19 11 8 34 23 19 21 12 9 38 2 2 24 14 42 28 22
Maximum Load and Torque Ratings METRIC UNITS 4MM FLAT TOP CHAIN 9MM THROUGH 3MM WIDTHS 12 8 6 4 2 8 7 6 4 3 2 1 4 3 2 1.8 9. 8.6 7.7 6.3.4 4. 4.7 4.3 3.7 3.1 3.4 2.9 2.4 1.6 1.9 9mm 12mm 1mm 18mm 2mm 24mm 27mm 3mm 1.8 1 1.2 Max. product load (kg) Torque (N-m) @ 1 m/min ( fpm) Max. product load (kg) Torque (N-m) @ 3 m/min ( fpm).4. 4. 3.6 3.1 3.1 2.8 2.2 2. 2.2 1.9 1.6 1.4 9mm 12mm 1mm 18mm 2mm 24mm 27mm 3mm Max. product load (kg) Torque (N-m) @ 4 m/min (1 fpm) 4. 4.1 3.6 3.1 2.7 2.2 2.4 2.2 1.8 2. 1.8 1.6 1.3 1.4 1.1.9 6.3 9mm 12mm 1mm 18mm 2mm 24mm 27mm 3mm 1 27 SpanTech LLC
Maximum Load and Torque Ratings U.S. STANDARD UNITS 4MM RAISED CHAIN 3.4 THROUGH 11.81 WIDTHS 4 3 3 2 2 1 3 3 2 2 1 2 2 1 6 Max. product load (lbs) Torque (in-lbs) @ fpm 38 34 31 28 23 21 19 19 17 16 1 12 12 8 3.4 4.72.9 7.9 8.27 9.4.63 11.81 Max. product load (lbs) @ fpm 29 26 22 2 16 1 16 13 13 11 11 8 6 3.4 4.72.9 7.9 8.27 9.4.63 11.81 Max. product load (lbs) @ 1 fpm Torque (in-lbs) Torque (in-lbs) 2 18 16 31 24 22 4 4 11 12 7 8 9 11 1 3.4 4.72.9 7.9 8.27 9.4.63 11.81 27 SpanTech LLC 16
Maximum Load and Torque Ratings METRIC UNITS 4MM RAISED CHAIN 9MM THROUGH 3MM WIDTHS 8 6 4 2 8 7 6 4 3 2 1 4 3 2 1 2.7 2.2 Max. product load (kg) Torque (N-m) @ 1 m/min ( fpm) 9. 8.6 7.7 6.8.4 4. 4.2 3.6 3.8 3.4 3.1 2.6 2.2 1.7 1.4 9mm 12mm 1mm 18mm 2mm 24mm 27mm 3mm Max. product load (kg) Torque (N-m) @ 3 m/min ( fpm) 2.7 1 1.3 1.4 7.2 6.8.9. 4. 3.6 3. 3.2 2.8 2. 2.3 1.8 9mm 12mm 1mm 18mm 2mm 24mm 27mm 3mm Max. product load (kg) Torque (N-m) @ 4 m/min (1 fpm). 4. 4.1 3.6 3.1 2.7 2. 2.2 2. 2.1 1.8 1.8 1.4 1.2.4.4 9mm 12mm 1mm 18mm 2mm 24mm 27mm 3mm 17 27 SpanTech LLC
Maximum Load and Torque Ratings U.S. STANDARD UNITS 6MM RAISED CHAIN 3.4 THROUGH 11.81 WIDTHS 18 1 12 12 9 6 3 16 12 8 4 1 12 9 6 3 16 4 22 7 3.4 4.72.9 7.9 8.27 9.4.63 11.81 1 3.4 4.72.9 7.9 8.27 9.4.63 11.81 12 Max. product load (lbs) @ fpm 3.4 4.72.9 7.9 8.27 9.4.63 11.81 27 SpanTech LLC 18 27 86 Max. product load (lbs) @ fpm 48 2 64 24 78 Max. product load (lbs) @ 1 fpm 4 16 4 2 64 Torque (in-lbs) 33 29 2 92 38 Torque (in-lbs) Torque (in-lbs) 24 78 34 28 12 8 9 44 39 32 136 124 4 49 44 36 12 138 114 4 49 4 168 12 126
Maximum Load and Torque Ratings METRIC UNITS 6MM RAISED CHAIN 9MM THROUGH 3MM WIDTHS 2 2 1 Max. product load (kg) Torque (N-m) @ 1 m/min ( fpm) 17.2 1. 12.2 11.6. 9.8 7.2 7.8 6.2 13.6 2. 1. 22.2 17.2 24. 18.8 2 2 1 2 1 9mm 12mm 1mm 18mm 2mm 24mm 27mm 3mm 22.2 2. 17.7 17. 1.4 1.6 13.1 13.8 12.2.9.4 9. 8.8 6.8 7..4 9mm 12mm 1mm 18mm 2mm 24mm 27mm 3mm.4 Max. product load (kg) Torque (N-m) @ 3 m/min ( fpm) Max. product load (kg) Torque (N-m) @ 4 m/min (1 fpm) 18.1 16.3 14. 14.2 12.7 12.8 11.4.9.2 9. 8.8 7.2 7.2 6. 4.6 9mm 12mm 1mm 18mm 2mm 24mm 27mm 3mm 19 27 SpanTech LLC
SpanTech LLC 111 Cleveland Avenue P. O. Box 369 Glasgow, KY 42142 (27) 61-9166 general_info@spantechllc.com www.spantechllc.com 27 SpanTech LLC 2