Prisme abkant cu umeri rabatabili Rolleri ROLLA-V ROLLERI Content Explanation 202-203 Model 1 204 Model 2 205 Model 2.5 205 Model 3 206 Model 4 206 Adjustable Dies 207 Hemming and Joggle Tools 207 Matrite Rolla-V Distribuitor : SM TECH S.R.L. www.sm-tech.ro www.rolleri.ro
ROLLA-V ONYX DIES Content Explanation Compatibility Our Advantages Your Convenience RVP Dies (Models 1, 2, 3) are compatible with press brake machines ( mm die holder) from: ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, Rico, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc. RVS Dies (Models 1, 2, 3) are compatible with press brake machines (14 mm tang) from: Amada Single V style RVT Dies (Models 1, 2, 3) are compatible with press brake machines (12.7 mm / mm tang) from: Bystronic, Beyeler, Edwards, Safan, SMD, Trumpf RVT Dies (Models 1, 2, 3) are compatible with press brakes machines (12.7 mm tang) from: LVD RVM Dies (Models 2.5, 3, 4) are compatible with all press brake machines (various die holders) all dies can be mounted in other press brakes by using adapters or customized die holders. Material no corrosion fast and easy tool change new design longer operational life high precision interchangeability guaranteed reduction of bending marks on the sheet metal small flanges bent without marks no metal residue left on tools during bending of galvanized sheet metal ideal for profiles with oblique sides Raw material is provided by qualified suppliers and chemical composition corresponds to international standards. Therefore, raw material yield and tensile strength are guaranteed. Model Material Type Hardness of the material and the tool body Hardness of the operating surfaces after induction hardening Body 1 / 2 / 2.5 / 3 / 4 42CrMo4 1-1 N/mm 2 55 HRc Inserts 1 / 2 / 2.5 Toolox 44 1450 N/mm 2 through hardened 44 HRc Inserts 3 / 4 Toolox 33 1 N/mm 2 55 HRc Specifications for the maximum press force kn/m are indicated as such, 1 t = 10 kn. Model 1 =1.5 mm (2.0 mm possible) Model 2 =3.0 mm (4.0 mm possible) Model 2.5 =5.0 mm (6.35 mm possible) Model 3 =6.3 mm (.0 mm possible) Model 4 =16.0 mm Equivalent V size (mm) 15 2 3 5 max. tool load (kn/m) Material Thickness (mm) min. bending angle needed press force mild steel with max. 450 N/mm 2 (kn) needed press force stainless steel with max. 700 N/mm 2 (kn) min. outside flange (mm) max. outside radius 0 0.70 40 50 70 3.0 3.0 0 1.10 35 0 3.9 2.6 0 1.50 35 270 410 4.2 2.2 1500 2.00 59 210 320.5 6.0 1500 3.00 47 550 50 9.3 5.0 1500 3.20 47 650 0 9.3 4. 2500 2.00 46 150 1.6.2 2500 4.00 46 470 730 1.6 12.0 2500 6.00 55 1270 19 1.6 9. 2500 2.00 6 70 110 22.5.9 2500 4.00 47 340 500 22.5 11.9 2500 6.00 50 0 00 22.5 9.9 3000 6.00 7 2 440 56.6 36.4 3000.00 76 500 40 56.6 36.4 3000 12.00 73 12 2150 56.6 36.4 202 www.rolleritools.com SM TECH SRL / https://www.sm-tech.ro Tel.: +39 05 23 7 09 05 sales@rolleri.it
Content Explanation PROFESSIONAL BENDING Tool lengths and sectioning Standard Segmented tools are delivered in complete sets. More lengths and sectionings are possible upon request. mm 500 mm Model 1, segmented (7 segments) 50 30 25 20 15 440 Model 2, segmented (7 segments) 40 35 30 25 20 450 Model 2.5, 470 mm segmented (6 segments) 470 50 45 40 35 Model 3, segmented (5 segments) 50 45 455 Article on stock Please ask for delivery time! 1 kg = 2.20 Pounds (lb) = 35.27 Ounzes (oz) Articles on stock Please note that mm = SM 3.94 TECH Inch (in) SRL = 0.33 / https://www.sm-tech.ro Feet (ft) delivery time depends on your location. 203
Model 1 RVP-1 0 kn/m max. 500 mm 797.- 6.9 kg segmented 1,576.- 6.1 kg RVS0-1 0 kn/m max. 500 mm 757.- 6.3 kg segmented 1,920.- 5. kg 0 14 RVT55-1 0 kn/m max. 500 mm 757.- 5.5 kg segmented 1,920.- 5.0 kg RVT-1 0 kn/m max. 500 mm 921.-.5 kg segmented 2,031.- 7. kg 55 RVT-1 0 kn/m max. 500 mm 10.- 9.4 kg segmented 2,031.-.6 kg 7 12,7 Rolleri Videos Use and application of Rolla-V dies www.rolleritools.com/videos/rolla-v 204 www.rolleritools.com SM TECH SRL / https://www.sm-tech.ro Tel.: +39 05 23 7 09 05 sales@rolleri.it
Model 2 PROFESSIONAL BENDING RVP65-2 500 mm 51.- 7.9 kg segmented 1,73.- 7.4 kg RVS0-2 500 mm 45.-.3 kg segmented 2,155.- 7. kg 0 65 14 RVT-2 500 mm.- 7.9 kg segmented 2,155.- 7.4 kg RVT-2 500 mm 97.- 11.3 kg segmented 2,231.- 10.6 kg RVT-2 500 mm 97.- 12.4 kg segmented 2,231.- 11.7 kg 7 12,7 Model 2.5 RVM2.5 65 0 kn/m max. without tang 500 mm 1,379.- 22.0 kg 470 mm segmented 3,57.- 21.0 kg with tang x 20 mm 500 mm 1,439.- 23.5 kg 470 mm segmented 3,767.- 22.4 kg Ideal for thick material! Making the impossible, possible... with tang 12.7 x 19 mm 500 mm 1,439.- 23.5 kg 470 mm segmented 3,767.- 22.4 kg Article on stock Please ask for delivery time! 1 kg = 2.20 Pounds (lb) = 35.27 Ounzes (oz) Articles on stock Please note that mm SM = 3.94 TECH Inch (in) SRL = 0.33 / https://www.sm-tech.ro Feet (ft) delivery time depends on your location. 205
Model 3 RVP-3 500 mm 1,532.- 2. kg segmented 3,1.- 26.2 kg RVM70-3 without tang 500 mm 1,430.- 20.6 kg segmented 3,71.- 1.7 kg 70 with base mm 500 mm 1,520.- 23.5 kg segmented 3,9.- 23.0 kg with tang mm 500 mm 1,4.- 22.1 kg segmented 3,9.- 20.1 kg with offset tang 12.7 mm 500 mm 1,4.- 22.1 kg segmented 3,9.- 20.1 kg RVT-3 500 mm 1,532.- 30.9 kg segmented 4,151.- 2.5 kg Model 4 Our Advantages Your Convenience The model 4 tools and the adjustable dies are suitable for thick sheet metal and large-radius bends. Material specifications vary greatly, therefore no specific data can be given. minimum flanges depend on the bending angle distortion of holes near the bending line is substantially decreased, although it depends on the type of the sheet metal large-radius bends are influenced by sheet metal springback, type of material and flange length For advice please contact us! RVM-4 without tang 500 mm 2,703.- 56.6 kg mm 1,993.- 22.7 kg with base mm 500 mm 2,793.- 61.3 kg mm 2,053.- 24.6 kg 170 5 3000 kn/m max. with tang mm 500 mm 2,763.- 5.1 kg mm 2,033.- 23.3 kg with offset tang 12.7 mm 500 mm 2,763.- 5.1 kg mm 2,033.- 23.3 kg 206 www.rolleritools.com SM TECH SRL / https://www.sm-tech.ro Tel.: +39 05 23 7 09 05 sales@rolleri.it
Adjustable Dies PROFESSIONAL BENDING Our advantages Your Convenience bending up to 30 mm thick sheet metal hardened inserts no traditional bending marks adjustable openings RVPV3 = 39-94 mm RVHD3 = 39-11 mm RVHD4 = 70-220 mm bending of laser-cut sheet metal without damaging the tool exact inner radius RVPV3 39-94 210 500 mm 4,331.- 50.0 kg mm 3,06.- 20.0 kg RVHD3 RVHD4 3500 kn/m max. 3500 kn/m max. 500 mm 5,4.- 9.0 kg 500 mm 7,65.-.0 kg mm 3,74.- 3.1 kg mm 5,116.- 0.0 kg 70-220 39-11 120 324 150 510 V-Bending flat inserts Radius-Bending flat inserts Conical Bending flat inserts Radius-Overbending concave inserts U-Bending V-inserts Hemming and Z-Tools Hemming Tool Joggle Tool per piece Price upon request per piece Price upon request Production according to your specifications Production according to your specifications Article on stock Please ask for delivery time! 1 kg = 2.20 Pounds SM TECH (lb) = 35.27 SRL Ounzes / https://www.sm-tech.ro (oz) Articles on stock Please note that mm = 3.94 Inch (in) = 0.33 Feet (ft) delivery time depends on your location. 207