Servo Systems Rail Systems Balancers Ergo Assists Controls Tables, Carts, & Shuttles. Ergonomic Handling Solutions.

Servo Systems Rail Systems Balancers Ergo Assists Controls Tables, Carts, & Shuttles Ergonomic Handling Solutions s Product Catalog

Innovation by... s IDEA Knight has the ability to transform a concept... DESIGN s by incorporating State-of-the-Art CAD Systems... s BUILD and using the latest machining, fabrication, and assembly technologies... REALITY s to solve your ergonomic material handling needs. s QUALITY Knight has achieved the highest Quality Assurance Certifications: ISO 9001:2008, ISO14001:2004, CE, and Ford Q1. We are committed to Total Customer Satisfaction through QUALITY, RELIABILITY AND EMPLOYEE INVOLVEMENT All information in this catalog is correct as of 01/01/10. Please contact your Knight representative to verify product information or visit www.knight-ind.com.

Warranty Information Knight warrants that its products and parts shall meet all applicable specifications, performance requirements, and be free from defects in material and workmanship for one year, (Servo Systems for two years), from the date of invoice, unless otherwise noted. One exclusion would include any purchased components not manufactured by Knight and their specific individual warranties. Paint defects, scratches and marring from shipping are also excluded. This warranty shall not cover failure or defective operation caused by inadequate training provided by customer regarding the operation and / or maintenance of the tool, misuse, negligence, misadjustment, or alteration not approved by Knight. Knight's obligation is limited to the replacement or repair of Knight's products at a location designated by Knight. Buyer is responsible for all associated internal removal and reinstallation costs as well as freight charges to and from Knight Industries. Knight's maximum liability shall not in any case exceed the contract price for the products claimed to be defective. Disclaimers: OTHER THAN AS SET FORTH HEREIN, NO OTHER EXPRESS WARRANTIES, AND NO IMPLIED WARRANTIES, ORAL AND WRITTEN, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE MADE BY KNIGHT WITH RESPECT TO ITS PRODUCTS AND ALL SUCH WARRANTIES ARE HEREBY SPECIFICALLY DISCLAIMED. KNIGHT SHALL NOT BE LIABLE UNDER ANY CIRCUMSTANCES FOR ANY INCIDENTAL, SPECIAL AND / OR CONSEQUENTIAL DAMAGES WHATSOEVER, WHETHER OR NOT FORESEEABLE, INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOST PROFITS AND ALL SUCH INCIDENTAL, SPECIAL AND / OR CONSEQUENTIAL DAMAGES ARE HEREBY ALSO SPECIFICALLY DISCLAIMED. Table of Contents SERVO SYSTEMS Servo Hoist Twin Chain Carriage Mounted Articulating Extension Arm Floor Mounted Articulating Extension Arm Articulating Extension Arm Heavy Duty Articulating Jib Boom Overhead Extension Arm Heavy Duty Overhead Extension Arm Floor Mounted Vertical Articulating Arm Overhead Vertical Arm Servo Hoist and Tractor Servo Rack and Pinion Tractor Servo Hoist Accessories RAIL Aluminum Rail Aluminum Curved Rail Steel Rail Tool Rail Engineered Rail Jib Cranes Rail Accessories BALANCERS Single Cable Single Chain Dual Drum Reeved Tandem Tandem Reeved Pneumatic Controls Balancer Accessories ERGO ASSISTS Articulating Arms Extension Arms Servo Arms Carriage Arms Lean Tools Vertical Mast Arms Side Mounted Fixtures Torque Packs Tool Holders Flexi Arms Quick Connects End of Arm Tooling CONTROLS Pneumatic Control Handles Electric Control Handles Pneumatic / Electric Control Handles Lever Options TABLES, SHUTTLES AND CARTS Lift Tables Lift and Rotate Tables Lift & Tilt Tables Tilt Tables Slide-Tilt Tables Corner Tilt Tables Turntables Zero Loader Double Scissor Lift Tables Portable Lift Tables Custom Carts Push / Tugger Carts Cart Lift Portable Cart Lift Smart Carts Bulk Cap Loader Lid Stack -N- Store Small Footprint Over/Under System Engine Block Rollover System Powered Accumulators Shuttle Systems Table Accessories 1 1 1 1 2 2 2 2 3 3 3 3 1-3 4 4 4 4 4 5 5 8 8 8 8 8 8 9 9 10 10 10 10 10 11 11 11 11 11 11 12 13 13 13 13 14 14 14 14 14 14 14 14 15 15 15 15 15 15 15 16 16 16 16 16 16 16

Servo Systems Knight Servo Systems are Intelligent Assist Devices (IAD) that provide controlled transfer of workloads. The user-friendly equipment enhances repeatable precision and speed for any application. Standard or custom options allow for various programmed product functions. For more detailed information, visit www.knight-ind.com Servo Hoist Enables the operator to precisely locate and/or float a load in the Z direction using programmable limits. Standard hoist has a lifting capacity up to 2000 lbs.[907kg] (Reeved unit) and travels up to 200 fpm[70mpm]. Model# KSH250-2301 Shown Servo Handles Analog Inline Control Handle (Standard) Programmable handle includes a run-stop button, programmable port, and I/O configuration port. Model# EBA1167 Shown Dual Speed Handle (DSH) Equipped with the same features of a Standard Inline Handle. Available in single or two speed configuration. This unit may be mounted on a separate cable. Model# EBA1063 Shown Servo Hoist Twin Chain Incorporates the benefits of a Servo System into a twin chain process. The twin chains help control unwieldy or long parts. Standard hoist has a lifting capacity up to 250 lbs.[113kg] and travels up to 200 fpm[70mpm]. ** 500, 750 and 1000lb hoists are application dependent and are considered a special order. Model# KSHTC250-2301 Shown LCD Display Handle Microprocessor based control handle which displays information on an LCD screen. Operator movement/force can be more accurately detected; resulting in a smoother, more responsive reaction. Model# DBA1031 Shown Servo Hoist Carriage Mounted Articulating Extension Arm Servo Hoist mounted on an Articulating Arm. Allows for overhead varied reach within a work cell. Standard arm has a lifting capacity up to 1500 lbs.[680kg] and travels up to 98 fpm[30mpm]. Model# KSHCA1500-2301 Shown Load Cell Fixture Handle Attaches directly to fixture; eliminates the need for push buttons. Features load responsive handling. Model# EBA1141 Shown Load Monitoring Module With OCI Asm. Used in conjunction with the Dual Speed Handle when an Inline handle is not a practical solution for the application. Model# EBA1165 Shown Servo Hoist Floor Mounted Articulating Extension Arm Servo Hoist mounted on an Articulating Arm. Allows for overhead varied reach within a work cell. Standard arm has a lifting capacity up to 1500 lbs.[680kg] and travels up to 98 fpm[30mpm]. Model# KSHFA1500-2301 Shown 1

For more detailed information, visit www.knight-ind.com Servo Hoist Articulating Extension Arm Articulating Arm attached to a Servo Hoist. Allows for overhead extended non-linear reach within a work cell. May be mounted to a single bridge, rotating carriage, or floor mounted pedestal. Standard arm has a lifting capacity up to 500 lbs.[227kg] and travels up to 98 fpm[30mpm]. Model# KSHAEA250-2301 Shown Servo Systems Servo Accessories Swivel Hook with Bail and Locking Gate Hook has an open bend to keep load inline with the chain. Model# EBA1219 Shown Servo Hoist Heavy Duty Articulating Jib Boom Articulating Extension Arm attached to a Servo Hoist. Allows for overhead extended non-linear reach within a work cell. May be mounted to a single bridge, rotating carriage, or floor mounted pedestal. Standard arm has a lifting capacity up to 1000lbs.[454kg] and travels up to 82 fpm[25mpm]. Model# KSHAEA1000-2301 Shown Shackle Secures fixtures or loads inline with the chain. Model# EBD2093 Shown Quick Connect Allows for fast and easy changes of standard or customized end effectors Model# EBA1183 Shown Servo Hoist Overhead Mounted Extension Arm Incorporates a Servo Hoist within a boom. Enables the operator to reach outside the area directly below the rail. Standard hoist has a lifting capacity up to 250 lbs.[113kg] and travels up to 200 fpm[70mpm]. ** 500, 750 and 1000lb arms are application dependent and are considered a special order. Model# KSHEA250-2301 Shown Servo Hoist Heavy Duty Overhead Mounted Extension Arm Incorporates a Servo Hoist within a boom. Enables the operator to reach outside the area directly below the rail. Standard hoist has a lifting capacity up to 250 lbs.[113kg] and travels up to 200 fpm[70mpm]. Coil Cable Cable surrounds Servo Hoist chain providing a clean, compact package. Model# EBA1011-6 Shown Pendant Cable Configuration used with the DSH. Provides flexibility to remotely mount handle. Model# EBA1009-3 Shown Load Trolley Attaches Servo Hoist to Knight 7510 & 4110 Series Rail. Model# EBA1030 Shown ** 500, 750 and 1000lb arms are application dependent and are considered a special order. Model# KSHEACA750-2301 Shown 2

Servo Systems Chain (Standard) Standard lengths of 12 ft. and 20 ft. 1000 lbs. max working load. Model# EBD1153 Shown Roller Chain Standard lengths of 12 ft. and 20 ft. 2000 lbs. max working load. For more detailed information, visit www.knight-ind.com Servo Hoist Floor Mounted Vertical Articulating Arm Servo Hoist mounted on a vertical aluminum mast. The boom enables the operator to reach underneath areas in a confined work cell. Standard hoist has a lifting capacity up to 250 lbs.[113kg] and travels up to 200 fpm[70mpm]. ** 500, 750 and 1000lb arms are application dependent and are considered a special order. Model# KSHVAA250-2301 Shown Scissor Prongs Mechanical latch design does not require air or electrical hook ups. Simply lower the fixture on the cylindrical part; automatically locks and secures the part. Box Prongs Mechanical latch design does not require air or electrical hook ups. Simply lower the fixture on the box; automatically locks and secures the box. Custom End Effectors Magnetic, vacuum lifting and clamping devices designed for a variety of hard to handle payloads and materials. Servo Hoist Overhead Mounted Vertical Arm Servo Hoist mounted on a vertical aluminum mast creates a steady state condition. Eliminates the yarding of a cable or chain. Standard hoist has a lifting capacity up to 1000 lbs.[454kg] and travels up to 200 fpm[70mpm]. Model# KSHVA250-2301 Shown Servo X / Y Tractor with Z Control Combines X, Y, and Z movements in one handle. Standard hoist has a lifting capacity up to 1000 lbs.[1814kg], lifting speed up to 196.85 fpm [60 mpm], tractor capacity of 4000 lbs. [1814kg], and tractor speed up to 175 fpm[53 mpm]. Model# KSHXYZ1000 Shown Enclosed Power Rail System DCL Power Rail capacity up to: 60 amps / 690 Volts. Knight RAD6110 rated load capacity. Eliminates stackup of traditional festooning. Model# ELEC1000 Servo Rack and Pinion Tractor Accurately locates a load in the X and/or Y direction. Standard tractor moves a load up to 4000 lbs. [1814kg] and travels up to 523 fpm [158mpm].*Speed varies by gearbox. Model# KST4000 Shown 3

RAD7510 For more detailed information, visit www.knight-ind.com RAD4100A-0690 06 = 6ft radius 90 = 90 RAD7500A-0590 05 = 5ft radius 90 = 90 RAD6110 RAD4110 TR2000 Aluminum Rails Knight Aluminum Enclosed Track Rail is extruded from high strength aluminum alloy The lightweight rail is offered in three sizes: RAD7510 8 [203mm] Capacity 5500 lbs. [2495kg] RAD6110 6 [152mm] Capacity 2790 lbs. [1265kg] RAD4110 4 [101mm] Capacity 1600 lbs. [726kg] TR2000 2 [51mm] Capacity 550 lbs. [250kg] Lengths range up to 30 [9.1m] without the need for a splice. Curved Aluminum Rails Overhead or floor mounted configurations. Used to transfer loads in the X and Y directions. Rail is split into two halves. RAD7510 8 [203mm] Capacity 2500 lbs. [1134kg] RAD4110 4 [101mm] Capacity 900 lbs. [408kg] Standard radiuses: 5ft. (1.52m) Minimum Radius 8ft. (2.44m) Maximum Radius Rail Systems Knight Rail Systems are designed to provide a safe, efficient solution to your ergonomic challenges. A wide range of options are available to meet specific engineering or application requirements. All suspension systems include an enclosed trolley track that resists dirt build-up for a smoother, quieter operation. A Knight Representative will assist you in selecting and developing alternatives when designing your rail system. Overhead Rail Suspension System RSD5700 RSD5500 RSD5300 Steel Rails Knight Steel Enclosed Track Rail is ideal for offset and side loading applications with load capacities up to 1000 lbs.[454kg]. The rail is offered in three sizes: RSD5700 7 [178mm], RSD5500 6 [152mm], and RSD5300 4 [101mm]. Lengths range up to 20 [6m] without the need for a splice. Tool Rails Tool Rail is easily installed on C-Channel or angle iron structures. The lightweight rail is offered in three sizes: TR2000 2 [51mm], HAD3000 2 [51mm], and HAD3500 2 [51mm]. The TR2000 is ideal for applications under 550 lbs.[249kg] capacity. Allows festooning trolleys and plant utilities to be attached to the main line rail system. Floor Mounted Rail Suspension Systems include pre-engineered Lindapter clamps at post and beam connection points. Capacities available in: 500 lbs [227kg], 1000 lbs [454kg], and 2000 lbs. [907kg] configurations. TR2000 HAD3000 HAD3500 HAD3000 chambered rail can be used as a fluid power distribution system for water, air, oil, and other non-caustic fluids. RAD4700 Engineered Round Rail RAD4700 and RAD6500 Round Rail is ideal for low friction vertical or horizontal linear movement. Capable of handling direct or offset loads as well as high torque applications. Designed to handle heavier loads when compared to traditional linear motion products. RAD6500 Engineered Linear Rail LRD9500 Linear Rail is ideal for floor or side mounted low friction horizontal movement. Capable of handling direct or offset loads. Lower maintenance alternative to hardened ground rail and bearing block. Binding is significantly reduced due to its flexible tolerances. Overhead and Floor Mounted Rail Suspension Systems are available in dual or single bridge configurations. LRD9500 4

Rail Systems For more detailed information, visit www.knight-ind.com MAJBA4000 MJBA3000 MJBA2600 MJBA2200 MJBA2100 MJBA2050 MJBA2000 Jib Crane Product Line Jib Cranes are ideal for short transfer applications. Allows for maximum hoist height where overhead clearance is limited. Thrust bearings provide a smooth 360 rotation. Installation is quick and simple with the two-component design. Jib lengths are available up to 14ft[4.26m] and can be extended by adding a telescoping rail. The new TJBA2600 eliminates the need to add another rail to telescope in/out. Capacity rating up to 2000lb[908kg]. Retracted Extended TJBA2600 End Caps Serves as a rail dust cover. May be used in conjunction with a mid-rail stop to form a redundant stop. Model# MRAA4804 Shown Rail Accessories Shock Absorber End Caps Dampens the impact of a load trolley striking the end cap. Model# MRAA4805 Shown Bridge Stop Assembly Prevents bridges from colliding into each other. Model# MRAA4926 Shown End of Travel Switch Mountable stop to prevent over travel on rail system. Trolley mounted actuator has a bypass feature. Model# MRAA4228 Shown Adjustable Bridge Brace Adjustable brace used to secure parallel rails at specific distances. Rail lengths greater than 15ft [4.5m] require two braces. Braces are adjustable to spans of 24 [609mm], 30 [762mm], or 36 [914mm]. Model# MRAA4205-36 Shown Rail Brake Pneumatic stop allows operator to park a bridge or arm on the rail. Bolts on to most Knight mainline trolleys and end trucks. Model# MRAA4359 Shown 5

For more detailed information, visit www.knight-ind.com (Rail Accessories Continued) Hose Management Kit Each kit includes brackets, fittings and cable for festooned, coiled hose, festooned/coiled hose or messenger cable.(filter/regulator and hose sold separately) Model# MRMS4202 Shown Rail Systems Rail Splice Joins runways or monorails. A hanger must be used within 12 [305mm] of a splice. Model# MRHA7503 Shown Filter/Regulator Controls air flow to rail system. Attaches to a RAD4110 or RAD7510 Series Rail. Filter/Regulator can be used in all Knight Hose Management Kits. Model# MRMA4488 Shown Inspection Gate Allows for removal, insertion, and inspection of a trolley or end truck without having to remove it at the end of a rail system. Model# MRAA7560 Shown Hose Various hose configurations (Hose is ordered per ft.). Coiled hose: 95 durometer ½ blue coiled urethane hose, 5 coil I.D. Straight hose: Non-conductive 3/8" 400 psi WP; USMSHA 2G-IC-14C/27 Coiled Hose Shown Telescoping Rail Extends the reach beyond the working limits of a bridge. Model# MRES7522 Shown Hose Trolley Carries festooned hose used in hose management kits. Model# MRMA4019 Shown Transfer Switch Allows fixtures to be transferred between work zones without cranes, fork trucks, or disassembling the system. Cable Saddle Adapts standard hose trolley to accommodate up to 2 [51mm] electrical cable. Velcro straps allow for an easier, quicker installation of power cables. Model# MRMA4301 Shown Cable Saddle with Trolley Assembly Hose trolley accommodates up to 2 [51mm] electrical cable. Velcro straps allow for an easier, quicker installation of power cables. Model# MRMA4215 Shown Hose Trolley for Messenger Cable Carries festooned hose used in hose management kits along a messenger cable. Available with eye bolt or cable saddle. Model# MRMA4494 Shown Air Tractors Provides mobility to a load or fixture. The load or fixture can be conveyed to the next position or returned home automatically. Capacity up to 3000 lbs [1360kg]. Optional mini tractor has a capacity up to 200lbs.[90kg]. Model# TRA5000 Shown Lube-free Air Tractors Provides mobility to a load or fixture. The load or fixture can be conveyed to the next position or returned home automatically. Capacity up to 3000 lbs [1360kg]. Lube-free design requires less maintenance. Model# TRA5500 Shown VFD Electric Tractors Provides mobility to a load or fixture. Direct drive system with programmable speeds, acceleration and deceleration points. Capacity up to 3000 lbs [1360kg]. Model# KET3000 Shown 6

Rail Systems For more detailed information, visit www.knight-ind.com (Rail Accessories Continued) Load Trolleys Trolley Options: Boss Trolley Yoke Trolley Eye-hook Trolley Balancer Trolley Model# MRTA7006 Shown Rod and Ball Hanger Used for direct loads such as hoists or balancers. Fits I-beam flange widths 2-11 [50mm-279mm]. Recommended light duty use only. Should not be used in applications that include: cantilevered loads, telescoping rails, shock loading, tractors, or heavy duty cycles. Model# MRHS40361 Shown End Trucks Available in a variety of configurations. Selection depends on size, profile, and loading condition of runway and bridge. Dual trolleys used when loads exceed 1000lbs [453kg]; not to exceed 3000 lbs[1360kg]. Model# MRES7717 Shown Same Plane End Truck Designed to elevate bridge to the same height as the runway. System stack-up heights can be reduced by as much as 11.5 [292mm]. Model# MRES4476 Shown C-Channel Rod and Ball Hanger Hanger with threaded rod leveling adjustments. Used for direct loads such as hoists or balancers. Recommended light duty use only. Should not be used in applications that include: cantilevered loads, telescoping rails, shock loading, tractors, or heavy duty cycles. Model# MRHS4034 Shown Rigid Hanger I-beam flange hanger used for kick-up loads such as arms or offset loads. Hanger is adjustable up to 1.5 [38mm] vertically. Fits I-Beam flange widths 2-11 [50mm-279mm]. Model# MRHS40381 Shown Rigid End Truck Eliminates bridge skew for applications that require added stability. Model# MRES4226 Shown C-Channel Bolt-On Hanger Non-Adjustable hanger used for cantilevered or direct loads. Model# MRHA4035 Shown Knight Engineering Standards Each component (i.e., rail, hangers, trolleys, etc.) is individually tested to establish its ultimate failure point. From this number, a safe working load is assigned to the component. Each rail span length is tested to determine the maximum single point load required to achieve a predetermined deflection based on a standard 1:350 ratio (1" of deflection for each 350" of length). We incorporate Knight specific PE developed load algorithms when specifying rail systems and jib booms. The algorithm serves as an unofficial PE certification by calculating a margin of safety on the bridge / runway of the system. 7

For more detailed information, visit www.knight-ind.com Balancers Knight Balancers position, balance, and ergonomically transfer loads via a unique "float mode" status. Positioning of a load is possible with or without using an Up/Down pendant control. Designed to be used with the entire Knight product line as well as a variety of other manufacturers' products. All balancer capacities are rated at 100 psi. Cable Balancers Balancers are equipped with a safety retract control mechanism. Cable Balancers have a balancing capacity up to 700 lbs. [318kg] and maximum travel distance up to 110 [279cm]. Model# KBA350-073 Shown Model Capacity *KBA100-028 100 lbs[45kg] KBA150-076 150 lbs[68kg] KBA225-110 225 lbs[102kg] KBA350-073 350 lbs[158kg] KBA500-080 500 lbs[227kg] KBA700-054 700 lbs[317kg] *Unique balancer designed for tool bench applications. Reeved Balancer Balance capacity can be doubled by reeving. Reeved Balancers have a balancing capacity up to 1400 lbs. [635kg] and maximum travel distance of up to 55 [138cm]. Model# RKBA700-036 Shown Model RKBA450-055 RKBA700-036 RKBA1000-040 RKBA1400-027 RKBC450-055 RKBC700-033 RKBC1000-040 RKBC1400-026 Capacity 450 lbs[204kg] 700 lbs[317kg] 1000 lbs[454kg] 1400 lbs[635kg] 450 lbs[204kg] 700 lbs[317kg] 1000 lbs[454kg] 1400 lbs[635kg] Chain Balancers Designed for applications that are subject to excessive amounts of yarding, twisting, or bouncing. Recommended for suspension weights greater than 300 lbs.[136kg] Chain balancers have a balancing capacity up to 700 lbs. [318kg] and maximum travel distance up to 80 [203cm]. Model# KBC350-067 Shown Model KBC225-067 KBC350-067 KBC500-080 KBC700-052 Dual Drum Balancer Capacity 225 lbs[102kg] 350 lbs[158kg] 500 lbs[227kg] 700 lbs[317kg] Two synchronized spools inside one housing offers added balance/control to unwieldy or lengthy loads. Balancing from two suspension points, Dual Drum Balancers have a balancing capacity up to 700 lbs. [318kg] and maximum travel distance up to 110 [279cm]. Model# DKBA350-073 Shown Model DKBA225-110 DKBA350-073 DKBA500-080 DKBA700-054 Capacity 225 lbs[102kg] 350 lbs[158kg] 500 lbs[227kg] 700 lbs[317kg] Tandem Balancer Doubles the load capacity of a single balancer without sacrificing vertical travel. Tandem Balancers have a balancing capacity up to 1400 lbs. [635kg] and maximum travel distance up to 110 [279cm]. Model# TKBA700-073 Shown Model Capacity TKBA700-073 700 lbs[317kg] TKBA1000-080 1000 lbs[454kg] TKBA1400-054 1400 lbs[635kg] TKBC700-067 700 lbs[317kg] TKBC1000-080 1000 lbs[454kg] TKBC1400-054 1400 lbs[635kg] Tandem Reeved Balancer Handles loads up to four times heavier than the largest single cable or chain balancer. Tandem Reeved Balancers have a balance capacity up to 2800 lbs. [1270kg] and maximum travel distance of up to 40 [101cm]. Model# TRKBA700-036 Shown Model Capacity RTKBA1400-036 1400 lbs[635kg] RTKBA2000-040 2000 lbs[907kg] RTKBA2800-028 2800 lbs[1270kg] RTKBC1400-033 1400 lbs[635kg] RTKBC2000-040 2000 lbs[907kg] RTKBC2800-028 2800 lbs[1270kg] 8

Balancers For more detailed information, visit www.knight-ind.com Balancer Accessories Pneumatic Balancer Controls Up/Down Pendant Tandem Units Up/Down Pendant High Relieving Single Balance Balancer Limit Switch Ability to set upper and lower limits. Eliminates unnecessary movements. Model# BPA2224 Shown External Retract Control Hydraulic shocks provide continuous resistance to spool travel. Prevents spool from accelerating if a load is lost. Model# BPA2089 Shown Variable speed control for loading and unloading varying weights. The most commonly used control for balancers. Available in straight or coiled hose and standard lengths of 10ft [3m]. Model# BCS3017 Shown Feather Touch Balance Variable speed control used on Tandem Balancers for loading and unloading varying weights. Available in straight or coiled hose and standard lengths of 10ft [3m]. Model# BCS3230 Shown Single Balance Supports a constant weight at zero gravity. Used for near capacity or applications greater than 150 lbs. [68 kg]. Available in straight or coiled hose and standard lengths of 10ft [3m]. Model# BCS2090 Shown Dual Balance Load Trolley Attaches balancers to various types of rail systems or I-beams. Model# MRTA7705 Shown Top Mount Single Hook Attaches a balancer by use of an eye-hook. Model# BPA2016 Shown Typically used for light weight applications. Control is activated by an up/down movement of the control handle. Available in straight or coiled hose and standard lengths of 10ft [3m]. Model# BCS2214 Shown Supports a constant weight at zero gravity. Recommended for applications less than 150 lbs. [68kg]. Model# BCS2018 Shown Supports two different weights at zero gravity. Used in applications where the part weight does not change. Available in straight or coiled hose and standard lengths of 10ft [3m]. Model# BCS2215 Shown 9

For more detailed information, visit www.knight-ind.com Ergo Assists Knight Ergo Assists accurately and effortlessly transfer materials of varying weights, shapes, and sizes. Combined with end-of-arm tooling, an operator can perform a variety of material handling applications. Assists are built to customer specifications. Articulating Arms Standard Articulating Arms are available in various sizes. Light duty are typically used for suspending single or multiple spindle torque tools. Medium duty are low profile for limited space, overhead applications. Heavy duty are ideal for bulkier loads. LEAN TOOLS Arms are either pedestal mounted or suspended from a rail system. Maximum weight capacity up to 500 lbs. [226kg]. Maximum extended reach up to 96 [244cm]. Maximum up/down travel distance up to 60 [152cm]. Model# AAA6000 Shown Seat Scoop (LTSS001) Extension Arms Enables operator to extend beyond the working limits of a rail system. A Knight Balancer or Servo Hoist mounts to the arm which lifts / lowers the load. Extension arms are available in either Single or Dual bridge configurations. Maximum weight capacity up to 700 lbs.[317kg]. Maximum extended reach adjustable up to 60 [152cm]. Maximum up/down travel distance up to 110 [275cm]. Model# KEAA1000-200 Shown J-Hook (LTJH001) Vacuum Cup (LTVC004) Magnetic (LTMG002) Servo Arms Servo Hoist mounted on an Articulating Arm. Allows for overhead extended reach within a work cell. Maximum weight capacity up to 1500lbs. [680kg]. Maximum extended reach up to 48 [122cm]. Maximum up/down travel distance up to 48 [122cm]. Box Clamp (LTSC001) Model# KSHCA-1500 Shown Prong Clamp (LTSC002) Carriage Arms Places the body of the arm between the runway saving up to 36 [91cm] of head room and is ideal for offset loads up to 400lbs. [181kg]. Improves ergonomics of the overall system by eliminating the need for a bridge. Knight Global Lean Tools are designed to be uncomplicated, durable, cost-effective Ergo Assists. Each pre-designed tool includes a balancer and pendant control. The Lean Tool Line is essentially a "pre-engineered Ergo Assist in a box." *Does not include engineering drawings. 10

Ergo Assists For more detailed information, visit www.knight-ind.com Vertical Mast Arms Allows for end tooling to be mounted to a rigid vertical beam. Vertical travel is achieved with a Knight Balancer, Servo Hoist, air / hydraulic cylinder, or chain hoist. Typically used in applications that require extensive up/down travel. Arm improves ergonomics by eliminating the need for the operator to bend or reach for control handles. Handles are in a fixed ergonomic position on the mast. Maximum lift capacity / travel distance is based upon the lift device. Model# ATA4000-200 Shown Linear Mounted Tooling Arms Allows for tooling to be mounted on a wall, in a pit, or run horizontally with the application. (Shown in use with a RAD6500 Rail System) Torque Arms Designed to absorb torque reaction from fastening devices and balance the tool. Arm includes a standard fixed tool holder. Custom travel distances, heights, and tool holders are available. Arms torque up to 853 ft./lbs(1156 Nm) and available in light, medium, and heavy duty configurations. Offset Tools and Multiple Tools Single Tool Model# ATA3500 (Medium Duty) Torques up to 500 ft./lbs(677 Nm). Model# ATA4500 (Heavy Duty) Shown Torques up to 853 ft./lbs(1156 Nm). Model# ATA1500 (Light Duty) Torques up to 74 ft./lbs(100 Nm). Model# ATA2600 (Medium Duty) Shown Torques up to 150 ft./lbs(203 Nm). Model# ATA2700 (Heavy Duty) Torques up to 300 ft./lbs(406 Nm). 360 Rotating Clamp Style Adjustable Clamp Style 11 Tool Bench Flexi-Arm Ideal for small part assembly applications and includes a standard tool holder. Balance capacity up to 30 lbs.[11kg]. Absorbs torque reaction, up to 30 ft./lbs(40.7 Nm), from fastening devices and balances the tool. Maximum travel distance is 13 [33cm]. Model# ABA2000 Shown Quick Build Connectors Versatile, lightweight, modular system of customized components needed for the creation of application specific workstations and fixtures. Features: modular design, quick assembly of fixtures, multiple sizes, and adjustable in 22.5 increments. Example of a Vacuum Cup Fixture and Workstation Shown

For more detailed information, visit www.knight-ind.com Ergo Assists J-Hook Style Dual J-hook style suspended by a Knight balancer. Transfers axle from dunnage to conveyor. Multiple Vacuum Cup Style Four (4) cup vacuum style end effector with 90 rotate. Transfers windshield from dunnage to vehicle. I.D. Clamp Style I.D. Clamp style fixture with adjustable centers. Transfers the wheels from dunnage to conveyor. End of Arm Tooling O.D. Clamp Style O.D. Clamp style fixture with rotate. Transfers the tire from dunnage to conveyor. I.D. Core Style Knight Vertical Arm core style gripper with power push-off. Transfers rolls of plastic film. Nesting Clamp Style Clamp style fixture removes the door from the vehicle. Door fixtures are designed to handle multiple style doors. Bite Line Clamp Style Clamp style fixture with 45 rotate. Transfers seat to the assembly station. Rotate Clamp Style Clamp style fixture with 180 rotate transfers the engine to build-up station. Magnetic Style Magnetic style fixture transfers the casing to the build-up station. 12

Controls For more detailed information, visit www.knight-ind.com Knight offers three types of control handles: pneumatic, electric, or pneumatic/electric combinations. Horizontal and vertical adjustments allows operator to maneuver handle to a comfortable ergonomic position. Control Handle Levers are marked according to customer specifications. Hose fittings and/or cables are supplied at customer request. Pneumatic Control Handles One (1) Button Model# BPA9400 Shown Electrical Control Handles Two (2) Button Model# BPA9100 Shown Three (3) Button Model# BPA9430 Shown Four (4) Button Model# BPA9310 Shown One (1) Button Model# EPA9500 Shown Two (2) Button Model# EPA9600 Shown Pneumatic / Electrical Control Handles Three (3) Button Model# EPA9650 Shown Four (4) Button Model# EPA9660 Shown Three (3) Button Model# EPPA9150 Shown Three (3) Button Model# EPPA9460 Shown Four (4) Button Model# EPPA9160 Shown Four (4) Button Model# EPPA9464 Shown Lever Options CUSTOMIZING LEVERS Levers can be customized for identification and ease of use. Callouts are stamped and available in different languages. Angled levers are used for optimum ergonomics. PAINT COLORS Up (Green) and Down (Red) levers are standard colors. Custom colors can be applied according to customer specification. 13 Angled Levers Shown REAR TRIGGER LEVERS Control handle levers can be mounted on the back of the handle for optimum ergonomics or as a fifth button. Model# EPPTA9150 Shown

For more detailed information, visit www.knight-ind.com Tables, Carts, and Shuttles Knight Tables raise, lift, tilt, slide, and rotate to proper ergonomic heights. Available load sensors maintain working height, reduce fatigue, and increase productivity. Standard tables have a lifting capacity up to 8000lbs[3629kg], typical platform sizes up to 62 [157.5cm] x 96 [243cm], and collapsible heights down to 4 [10cm]. Custom tables can be designed and built per customer specifications. Lift Lift Table raises loads to the proper ergonomic height for the operator. Lifting capacity up to 8,000 lbs.[3629kg]. Also available in a low profile configuration with a collapsed height as low as 4 [10cm]. Model# L3636-2000 Shown Lift and Rotate Rotate Table provides up to 360 rotation. Lifting capacity up to 8,000 lbs.[3629kg]. Also available in a low profile configuration with a collapsed height as low as 7.5 [19cm]. Model# LR4860C-2000 Shown Lift and Tilt Combines lift and tilt functions. Lifting capacity up to 6,000 lbs.[2722kg]. Model# LT4860-4000 Shown Tilt By tilting container forward, the table positions dunnage for easy loading or unloading. Lifting capacity up to 8,000 lbs.[3629kg]. Model# T4860-4000 Shown Slide - Tilt Maintains clearance on the operator side of the table.lifting capacity up to 8,000 lbs. [3629kg]. Model# ST5560-4000 Shown Corner Tilt Tilts and positions pallet or basket to operator working level. Lifting capacity up to 4,000 lbs. [1814kg]. Model# CT3636-4000 Shown Turntables One, two, or four position configurations. Parts can be continuously supplied to an assembly station. Capacity up to 8,000 lbs.[3629kg]. Zero Loader Ground level loading with a pallet jack when fork truck access is limited. Lifting capacity up to 4,000 lbs.[1814kg]. Model# TZ4860-2000 Shown 14

Tables, Carts, and Shuttles For more detailed information, visit www.knight-ind.com Double Scissor Lift When extra lift is needed to raise loads to a safe ergonomic height. Lifting capacity up to 2,000 lbs.[907kg]. Model# DSL4860-1000 Shown Portable Lift Table Customize the deck size and lift height to meet the application. Lift table is mounted to cart for mobile use. Custom Carts Designed per application. Open or fully enclosed with vinyl covers or solid doors. Push / Tugger Cart Fork-free carts in either push or tugger configurations. Capacity up to 1500 lbs. [680kg]. Cart Lift Table lifts a cart to operator working level. Lifting capacity up to 2,000 lbs.[907kg]. Portable Cart Lift Small footprint, fork-free lift raises cart to operator working level. Lifting capacity up to 1,000 lbs.[454kg]. Rear wheels allow operator to transfer empty cart lift to multiple locations without the use of a fork truck. Smart Cart The Smart Cart is ideal when portable powered manipulation is required for an application. Lifting capacity up to 400 lbs.[181kg]. Various end effector options available: I.D. roll gripper, clamp, suction cup, etc. MorTrans Smart Cart with rollerbed end effector. Provides effortless loading / unloading of cumbersome materials. Lifting capacity up to 400 lbs.[181kg]. 15

For more detailed information, visit www.knight-ind.com Tables, Carts, and Shuttles Bulk Cap Loader All stainless steel construction. Deck Size 50 x 50, up to 40 tilt with up to 500 lbs.[227kg] capacity. Lid Stack -N- Store Large, heavy, cumbersome container lids can be easily stacked at a common location without manual handling. Small Footprint Over/Under Exclusive design provides a shuttle system in a compact footprint. Lifting capacity up to 2,000 lbs.[907kg]. Engine Block Rollover System Rotates engine 180 and transfers it to an assembly station. Table lifting capacity up to 4,000 lbs.[1814kg]. Powered Accumulators Transfers parts between two workstations and offers an accumulation of parts. Loading capacity up to 50lbs/ft. Shuttle Systems Shuttles accumulate multiple dunnages that allows operators to continuously work without the need to stop for dunnage reload. Optional docking system for forkfree incentive tugger carts. Table Accessories Table Controls Controls are available in either pedestal or foot controls. Bellows Skirting Protective covering serves as a barrier for the operator. Keeps debris from entering the table. Model# BSS100T Shown Motion Stabilizer Stabilizes loads traveling upward / downward in a smooth, consistent manner. Typically used for loads greater than 4000 lbs.[1814kg] Model# MSD-100 Shown Steel Riser All steel reinforced construction ensures a safe, sturdy mounting base. Standard or custom built. Model# ASTR-100 Shown 16

The Knight Website Visit our website @ www.knight-ind.com to obtain detailed information on product lines, videos, technical manuals, brochures, and contact lists. Follow us on Twitter and YouTube for up-to-date information and videos: http://twitter.com/knightglobal http://www.youtube.com/knightglobalsolution Knight Industries is known worldwide for: s s s s s Experience: Designing and building ergonomic material handling equipment since 1984. Building Space: Over 150,000 square feet Value Added Customer Support: Worldwide Distributors Design: State-of-the-Art 2D and 3D design software: Includes CATIA, Unigraphics, Solid Works, and AutoCad. Quality Assurance: Includes duty cycle and destructive testing capabilities. s s s s Service: Stand alone department. Fully trained field service technicians on call 24/7. Controls: Design and build electrical and pneumatic systems. Build: Full CNC, Laser / Plasma / Waterjet Cutting, and Robotic Welding technologies. Support Staff: Project Management, I.T., Standards, Scheduling, Marketing, and Sales Representatives. Knight Headquarters and Facilities in Auburn Hills, MI MATERIAL HANDLING INDUSTRY OF AMERICA Member Company Made With Pride In The USA ISO 14001 ISO 9001 TM KNIGHT GLOBAL 1140 Centre Road Auburn Hills, MI 48326 USA Phone: (248) 377-4950 Fax: (248) 377-2135 www.knight-ind.com 01/12