Volition VF-45 Socket Termination and Maintenance Cleaning Kits COOL HAND TOOLS. VF-45 Socket Termination Kit Get your hands on a Volition VF-45 Socket Termination Kit from 3M and you will have everything you need to quickly and easily install Volition VF-45 sockets onto duplex fiber optic cable. Cable and fiber strippers, polishing and socket assembly fixtures, and inspection viewer all fit in a micro pouch that can be clipped onto a tech s belt. The termination kit works in concert with the snap together design of the socket to eliminate most of the steps and labor associated with traditional fiber optic terminations. With the VF-45 socket termination kit, you can complete fiber installations faster and easier; duplex fiber terminations can be performed in less than two minutes. CLEAN UP YOUR ACT. Maintenance Cleaning Kit The Volition Maintenance Cleaning Kit from 3M keeps VF-45 fiber interconnects located within wall boxes, patch panels or electronic equipment, clean and operating at a just installed optical performance level. The system consists of a spray bottle of Volition HFE-Based Cleaning Fluid designed for cleaning VF-45 sockets and plugs. HFE-based cleaning fluid is non-flammable and non-conductive. The maintenance cleaning kit is a convenient, effective and quick way to clean fiber end faces, without disassembly from face plates or panels.
Volition VF-45 Socket Termination Kit FEATURES BENEFITS Simplified process Belt-loop micro pouch Faster and easier to use Easy to carry and easy to use Specifications Cool tool design Integrated process and higher reliability with fewer steps 500 terminations of the VF-45 socket per consumables are included in the kit. Individual replacement consumables and hand tools are available. 99% Isopropyl Alcohol purchased separately. Storage temperature: -40 to 60 C (-40 to 140 F) The hand tools included in the kit are used to prepare Volition optical fiber cable. Preparation of Volition Horizontal and Backbone Cable includes the stripping of duplex fibers for termination with VF-45 sockets (3M VOL-0001). Simultaneous duplex termination saves labor and speeds installation. The Polishing Puck Assembly, Polishing Station Base, and Lapping Film provide for fiber end face preparation to the specified length and finish for termination with VF-45 sockets (3M VOL-0001). The Swabs and Wipes are used for cleaning, while the View Scope is used for inspection of the optical fibers following the termination process, ensuring a high yield of VF-45 terminations for high performance. Installation Notes When planning large installations, calculate 500 terminations of the VF-45 socket per package of : Lapping Film 25 Discs Cotton Swabs 100 Discs Lint Free Wipes 100 Discs The Puck Polishing Face will wear slightly or may become clogged over hundreds of terminations, and is replaceable when needed. The Scribe Blade Assembly will wear with use. Typical blade life is 1,000 terminations. The blade edge may wear prematurely due to harsh handling or stressful conditions. The Scribe Blade Assembly is replaceable when needed. Instruction Manual (replacement folder) Part #34-7042-8869-4.
Ordering Information Model # VOL-0560 Description VF-45 Socket Termination Kit with Spiral Bound Instruction Manual Replacement Included in Model # Individual Components Quantity Kit VOL-0560 VOL-0560A Cable Jacket Stripper 1 * VOL-0560B Snips 1 * VOL-0560C Buffer Tube Stripper 1 * VOL-0560D Dual Fiber Stripper, 250 µm coating 1 * VOL-0560F Polishing Puck Assembly (includes Puck Polishing Face) 1 * VOL-0560G Puck Polishing Face 1 VOL-0560H Polishing Station Base (includes Scribe Blade Assembly and Foam Polishing Pad) 1 * VOL-0560J Scribe Blade Assembly 1 VOL-0560K Lapping Film 25 discs * VOL-0560L Fiber View Scope w/adapter Base (includes Penlight w/batteries) 1 * VOL-0560M Penlight (batteries included) 1 VOL-0560N Cotton Swabs 100 * VOL-0560P Lint Free Wipes 100 * VOL-0560R Bottle, Alcohol, empty 1 * VOL-0560S Carrying Case 1 * VOL-0560T Foam Polishing Pad 1
Volition Maintenance Cleaning System FEATURES BENEFITS Kit Contents Volition VF-45 Maintenance Cleaning Kit 1-16 oz. bottle, Volition HFE-Based Cleaning Fluid 1 - Spray nozzle, trigger activation with socket spray head 1 - VF-45 plug adapter Volition HFE-Based Cleaning Fluid 16 oz. bottle, replacement for Maintenance Cleaning Kit 12 bottles per case Specifications Non-flammable Non-conductive Low toxicity Rapid drying Front access spray cleaning HFE-Based Cleaning Solution Replacement bottle of cleaning solution Allows for front-face cleaning of VF-45 socket, no disassembly from face plate required 400 cleanings per 16 oz. bottle Storage temperature -40 to 60 C (-40 to 140 F) 16 oz. bottle, replacements available Easy maintenance in tight spots, no disassembly of wall plates, reduced labor Non-flammable, Non-conductive Cost effective Warning Do not substitute any other cleaning fluid due to the unique properties of Volition HFE-Based Cleaning Fluid. Other fluids may damage sensitive electronic equipment and will not properly clean the VF-45 interconnect. VF-45 Socket Spray Head (installed) Socket spray head inserts into VF-45 socket (3M part VOL-0001) or compatible Volition component. Activation of the trigger sprayer delivers a high force stream of Volition HFE-Based Cleaning Fluid to achieve effective cleaning of terminated fiber end faces.
Specifications (Cont.) VF-45 Plug Adapter Plug adapter couples the socket spray head to a VF-45 plug terminated on a patch cord or compatible Volition component. Activation of the trigger sprayer delivers a high-force stream of Volition HFE-Based Cleaning Fluid to effectively clean fiber end faces. Ordering Information Model # VOL-0570 VOL-0570A 9.10 (231.14) Description VF-45 Maintenance Cleaning Kit Volition HFE-Based Cleaning Fluid, 16 oz. bottle.38 (9.91) Dimensions in. (cm) 2.90 (73.66) Volition VF-45 Maintenance Cleaning Kit.62 (15.74) VF-45 Socket Spray Head (installed).58 (14.73) 1.31 (33.27) VF-45 Plug Adapter (included).45 (11.43).61 (15.49)
Important Notice All statements, technical information, and recommendations related to Seller s products are based on information believed to be reliable, but the accuracy or completeness thereof is not guaranteed. Before utilizing the product, the user should determine the suitability of the product for its intended use. The user assumes all risks and liability whatsoever in connection with such use. Any statements or recommendations of the Seller which are not contained in the Seller s current publications shall have no force or effect unless contained in an agreement signed by an authorized officer of Seller. The statements contained herein are made in lieu of all warranties, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose which warranties are hereby expressly disclaimed. SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY INJURY OR FOR ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER S PRODUCTS. 3 Telecom Systems Division 6801 River Place Blvd. Austin, TX 78726-9000 800/695-0447 FAX 512/990-7962 http://www.3m.com/volition Volition, VF-45 and the dot wave symbol are trademarks of 3M. 40% Pre-consumer waste paper 10% Post-consumer waste paper 80-6110-0748-7