LT ONVYOR STION ONTNT olt-together Straight olt-together Incline/ecline Welded Straight elt urve Optional quipment and evices 15
LT ONVYOR WHY? Provides the most versatile means of handling a wide variety of products chieves higher speeds than other conveyor types Many belt options for specific applications ommon applications include assembly, sorting, inspecting and transportation SLIR 4" N RIV 4" I. RIV INTRMIT STIONS 3" INGR GUR 4" I. TK-UP 4" - 36" 3' - 102' 16" - 84" + 5" + 9 1/8" + 2" 3" - 9"** = elt Width (W) (1" Increments) = Overall Length (OL) (ny Increment) = Top of elt (TO) = ed Width = Overall rive Width = etween rame () 1.9" I. RTURN 2 1/2" I. SNU RMOV WHN TK-UP LOS TO N 8" N RIV **ependent upon overall conveyor length 8" I. RIV 6" INGR GUR WITH = W + 5" LT WITH (W) 10 1/16" 3 1/2" ORM STL 1.9" I. RTURN 8" NTR RIV 4" I. INTRMIT STIONS 3" 4" I. TK-UP 4" I. 3" 8" I. RIV 2 1/2" I. SNU 17
4" N RIV 4" - 36" 3' - 102' 16" - 84" + 5" + 9 1/8" + 2" = elt Width (W) (1" Increments) = Overall Length (OL) (ny Increment) = Top of elt (TO) = ed Width = Overall rive Width = etween rame () 4" I. RIV INTRMIT STIONS INGR GUR 3" 4" I. TK-UP 1.9" I. 3" - 9"** 1.9" I. RTURN 2 1/2" I. SNU RMOV WHN TK-UP LOS TO N **ependent upon overall conveyor length 8" N RIV 8" I. RIV 10 1/16" 6" INGR GUR 1 1/2" OVRLL WITH = W + 5" TWN RM = W + 2" LT WITH (W) 7/16" 1.9" I. RTURN 1.9" I. 8" NTR RIV 4" I. INTRMIT STIONS 3" 4" I. TK-UP 4" I. 3" 2 1/2" I. SNU 1.9" I. RTURN RIV LOTIONS Note: short belt segment laced on both ends, commonly called a dutchman, is provided with conveyors over 47' OL. This allows future belt stretch with standard end take-up. If short segment is not desired, a center drive/take-up is required. RVRSIL LT N NTR RIGHT N 18
I LT ONVYOR INLIN STYL 1 INLIN LT ONVYOR 7.5-27.5 5' - 50' 6" - 36" 1' - 9' + 9 1/8" = ngle = ed Length = ed Width (1" Increments)* = Infeed/ischarge ed Length = Overall rive Width* *Reference horizontal belt for end views 6" LOOR SP LIT NOS OVR 3" - 9"** **ependent upon overall conveyor length STYL 2 INLIN LT ONVYOR 3" LOOR SP LIT NOS OVR STYL 3 LIN LT ONVYOR LOOR SP 3" LIT NOS OVR 19
HORSPOWR N LO SPIITIONS (HORIZONTL LT ONVYOR) elt Width in 1" Increments (in.) HP SLIR PITIS 4" ia. Pulley 8" ia. Pulley 12' 22' 32' 42' 52' 72' 102' Maximum Uniformly istributed Load (lbs.) 6 12 16 18 20 24 30 36 elt Width in 1" Increments (in.) 1/2 505 500 495 485 480 415 395 1 1030 1025 1020 1015 1005 915 895 1/2 495 485 470 460 445 370 335 1 1025 1010 1000 985 970 870 835 1/2 490 475 460 440 420 340 290 1 1015 1000 985 970 950 840 795 1/2 485 470 450 435 410 325 270 1 1015 995 980 960 940 825 775 1/2 485 465 445 425 400 310 250 1 1010 990 970 950 925 810 750 1/2 480 455 430 405 375 280 205 3/4 730 705 685 660 630 525 455 1/2 470 440 410 380 345 235 145 3/4 720 690 660 635 595 480 390 8" ia. rive and 6" ia. Take-Up Pulley 1/2 400 365 330 290 255 185 80 1 900 865 830 795 760 685 580 PITIS HP 4" ia. Pulley 8" ia. Pulley 12' 22' 32' 42' 52' 72' 102' Maximum Uniformly istributed Load (lbs.) 6 1/2 2880 2900 2845 2770 2675 2220 1990 1 2880 5280 6005 5930 5835 5230 5000 12 1/2 2880 2805 2680 2555 2410 1860 1490 1 2880 5280 5840 5715 5575 4870 4500 16 1/2 2880 2725 2570 2415 2235 1620 1155 1 2880 5280 5730 5575 5395 4630 4165 18 1/2 2860 2690 2515 2345 2150 1500 985 1 2880 5280 5675 5505 5310 4510 3995 20 1/2 2835 2650 2460 2275 2060 1380 820 1 2880 5280 5620 5435 5220 4390 3830 24 1/2 2790 2570 2350 2135 1885 1140 485 3/4 2880 4090 3870 3650 3405 2620 1965 30 1/2 2720 2455 2185 1920 1620 785 45 3/4 2880 3975 3705 3440 3140 2265 1465 8" ia. rive and 6" ia. Take-Up Pulley 36 1/2 2290 1975 1665 1350 1035 410 N/ 1 2880 4990 4675 4360 4045 3420 2480 apacities stated are for 60 PM and standard drive components for horizontal belt conveyor only PITY - General Horizontal and Incline apacity Guideline - Maximum load per linear foot of conveyor, 100 lbs. for Slider ed and 240 lbs. for Roller ed LT - Standard belt for horizontal is lack Trackmate 120. Standard belt for incline is lack Trackmate 120 Rough Top. oth with exposed clipper lacing. SLIR RM - 3 1/2" high x 12 ga. galvanized steel slider bed with bolt-on end couplers/splice plates RM - high x 1 1/2" flange x 12 ga. galvanized steel formed channel frames with bolt-on end couplers - 1.9" dia. x 16 ga. galvanized steel tubes, 7/16" spring retained hex axle, non-precision bearings with 3", 6", 9" and roller centers ONSTRUTION - olt-together frames, spreaders, end couplers and splice plates LT WITH - Horizontal 4" to 36" and Incline 6" to 36", both in 1" increments OVRLL LNGTH - Horizontal 3' to 102' in any increment INLIN LNGTH - 5' to 50' in any increment INLIN GRS - 7.5, 12.5, 15, 20, 22.5, 25 and 27.5 RIV STYL - Horizontal - Underhung end drive or underhung center drive, Incline - Underhung center drive SP - 30 to 120 PM MOTOR - 1/2 HP through 2 HP, 1750 RPM, -face, 208-230-460V/3PH/60Hz, T 20 STNR SPIITIONS xpanded product parameters available. or more information see Tech Handbook. INLIN RK MOTOR - 1/2 HP through 2 HP, 1750 RPM, -face, 208-230-460V/3PH/60Hz, T RUR - Sealed, worm gear, -face RIV SPROKTS - #50, #60 or #80 series sprockets with keyed hub and set screws MOUNT RINGS - Precision, sealed, pre-lubricated, self-aligning, flange mount ball bearing units with cast iron housing RIV HIN - #50, #60 or #80 series roller chain RIV - 4" dia. with 1 3/16" dia. shaft or 8" dia. with 1 7/16" dia. shaft, crowned, fully lagged TIL - 4" dia. with 1 3/16" dia. shaft, 6" dia. at 36" belt width, crowned SNU S - 2 1/2" dia. x 10 ga. galvanized steel tubes, 11/16" spring retained hex axle, non-precision grease packed bearings RTURN S - 1.9" dia. x 16 ga. galvanized steel tubes, 7/16" spring retained hex axle, non-precision grease packed bearings TK-UP - Screw type take-up assembly SUPPORTS - djustable H-style, bolted 16" to 84" from floor to top of belt. One support at every bed joint and at ends of conveyor. Supports are shipped loose. INISHS - Galvanized steel standard. Powder coat available.
LT SPIITIONS LK TRKMT 120 ROUGH TOP (INLIN STNR) LK OMNITHN 150 WHIT PV 120 xcellent Tracking riction Surface ut and brasion Resistant Non-Marking mbossed PV Rough Top PV Smooth Polyurethane Smooth PV Strength 120 PIW 120 PIW 150 PIW 120 PIW Thickness.1".23".16".14" LT LK TRKMT 120 (HORIZONTL STNR) haracteristics over Lacing lipper Other types of belt available upon request OPTIONL QUIPMNT N VIS - vailable in fixed or adjustable with multiple contact surfaces. llows product to be guided and kept in place within the conveying surface. Side guides are bolted to the conveyor frame. IX NGL IX HNNL UHMW IX NGL ixed ngle Side Guides - Standard 1 1/2" x 2" high or 1 1/2" x 6" high formed, 12 ga. angle ixed hannel Side Guides - Standard 2 1/2" high or 3 1/2" high, 12 ga. formed channel UHMW ixed ngle Side Guides - Replaceable UHMW face provides wear protection for angle guides djustable Rail UHMW Side Guides - Replaceable UHMW face provides wear protection on rails, width and height adjustable JUSTL RIL UHMW TLL IX HNNL TLL IX HNNL SI GUIS WITH GUSSTS Tall ixed hannel Side Guides - Higher formed angle for tall product Tall ixed hannel Side Guides with Gussets - Higher formed and gusseted angle for tall product Tall ixed hannel Side Guides with Threaded Rod Higher formed angle with threaded rod adjustment for tall product TLL IX HNNL WITH THR RO IX NGL WITH SPR R SKTWHL ixed ngle Side Guides with Spacer ar - Spacer bar allows side guide to overlap belt to remove gap Skatewheel Side Guides - Vertically mounted skatewheels Side Guides with elt Skirts - elt skirts attached to formed angle to keep product off the belt edges lared Side Guides - unnel type side guides for guiding product during loading (v-guided belt only) WITH LT SKIRTS LR KN R SUPPORTS SUPPORTS - vailable with caster options for portability. Supports are designed to be bolted to the conveyor frame. Supports are shipped loose. Knee race Supports - ormed angle brace adds stability to conveyor and leg supports Portable H-Stands - 3" x 1 1/2" x 12 ga. formed channel leg uprights (800 lbs. capacity) PORTL H-STNS SUPPORTS 21
OPTIONL QUIPMNT N VIS ILING HNGRS - llows conveyor to be suspended from the ceiling. Threaded rod is attached to support steel under the conveyor frame. eiling attachments to threaded rod by others. SI VIW ILING HNGRS N VIW 5/8-11 threaded rod x 10' LT LING Recessed Hidden RSS HIN lapover Standard (xposed) Other types available LPOVR LT LING STNR (XPOS) RIV STYL Shaft Mount nd rive Overtop nd rive SHT MOUNT N RIV LR Motorized Pulley MOTORIZ RIV STYL OVRTOP N RIV NOS - Ideal for small product transfer. Must be center driven. NOS V-GUI ONSTRUTION - Required if length-to-belt width ratio is less than 2.5:1. Uses x 1 1/2" x 12 ga. galvanized frame. Not available with center drive. Proper belt tracking still required. V-GUI ONSTRUTION TROUGH ONVYOR - onveys cylindrical products. onveyor slider or roller bed is V-shaped. TROUGH ONVYOR STINLSS STL - onveyors are available in stainless steel materials for washdown applications or harsh environments 22
W WL LT ONVYOR WHY W? Stronger welded frame construction than bolt-together frame Provides the most versatile means of handling a wide variety of products chieves higher speeds than other conveyor types Many belt options for specific applications ommon applications include assembly, sorting, inspecting and transportation W - 300 SLIR 4" - 48" 5' - 100' 16" - 89" + 7" + 11 3/4" + 4" = elt Width (W) (1" Increments) = Overall Length (OL) (ny Increment) = Top of elt (TO) = ed Width = Overall rive Width = etween rame () 4" N RIV 4" I. RIV RIV STION INTRMIT STIONS TK-UP STION 2 1/2" TS S 4" I. TK-UP 2 1/2" - 8 1/2"** INGR GUR 1.9" I. RTURN 2 1/2" I. SNU RMOV WHN TK-UP LOS TO N **ependent upon overall conveyor length 8" N RIV 8" I. RIV 9 1/2" RIV STION INTRMIT STIONS TK-UP STION 4 3/4" TS S 6" I. TK-UP 3 1/2" - 9 1/2"** INGR GUR 7 1/2" 1.9" I. RTURN 2 1/2" I. SNU RMOV WHN TK-UP LOS TO N **ependent upon overall conveyor length RIV LOTIONS 1 1/2" OVRLL WITH = W + 7" TWN RM = W + 4" LT WITH (W) RVRSIL 1.9" I. RTURN 10 G. ORM STL SLIR PN LT N NTR RIGHT N 23
W - 300 4" N RIV 4" - 48" 5' - 100' 16" - 89" + 7" + 11 3/4" + 4" = elt Width (W) (1" Increments) = Overall Length (OL) (ny Increment) = Top of elt (TO) = ed Width = Overall rive Width = etween rame () 4" I. RIV RIV STION INTRMIT STIONS TK-UP STION 2 1/2" INGR GUR 4" I. TK-UP 2 1/2" - 8 1/2"** 8" N RIV 1.9" I. RTURN 2 1/2" I. SNU RMOV WHN TK-UP LOS TO N **ependent upon overall conveyor length 8" I. RIV 9 1/2" RIV STION INTRMIT STIONS TK-UP STION 4 3/4" INGR GUR 6" I. TK-UP 3 1/2" - 9 1/2"** 7 1/2" 1.9" I. RTURN OVRLL WITH = W + 7" 1 1/2" TWN RM = W + 4" 1 1/2" LT WITH (W) 2 1/2" I. SNU RMOV WHN TK-UP LOS TO N **ependent upon overall conveyor length 1.9" I. RTURN 1.9" I. STNR SPIITIONS PITY - Maximum load per linear foot of conveyor, 300 lbs. for both Slider ed and Roller ed LT - lack Trackmate 120 with exposed clipper lacing SLIR RM - 10 ga. formed steel slider bed pans welded in high x 10 ga. formed steel channel frames with welded in end couplers RM - high x 10 ga. formed steel channel frames with welded in end couplers - 1.9" dia. x 16 ga. mild steel tubes, 7/16" spring retained hex axle, non-precision bearings with 6" roller centers ONSTRUTION - Welded frames, spreaders and welded in end couplers LT WITHS - 4" to 48" in 1" increments OVRLL LNGTH - 5' to 100' in any increment RIV STYL - Underhung end drive or underhung center drive SP - 30 to 120 PM MOTOR - 1/2 HP through 2 HP, 1750 RPM, -face, 208-230-460V/3PH/60Hz, T RUR - Sealed, worm gear, -face xpanded product parameters available 24 RIV SPROKTS - R series sprockets with keyed hub and set screws MOUNT RINGS - Precision, sealed, pre-lubricated, self-aligning, flange mount ball bearing units with cast iron housing RIV HIN - R series roller chain RIV - 4" dia. with 1 3/16" dia. shaft, 8" dia. with 1 7/16" dia. shaft or 8" dia. with 1 11/16" dia. shaft, crowned, fully lagged TIL - 4" dia. with 1 3/16" dia. shaft, 6" dia. at 36" belt width, crowned SNU S - 2 1/2" dia. x 11 ga. mild steel tubes, 11/16" spring retained hex axle, non-precision grease packed bearings RTURN S - 1.9" dia. x 16 ga. mild steel tubes, 7/16" spring retained hex axle, non-precision grease packed bearings TK-UP - Screw type take-up assembly SUPPORTS - Structural channel H-style, welded 16" to 84" from floor to top of belt. One support at every bed joint and at ends of conveyor. Supports are shipped loose. INISHS - Powder coat finish standard. Wet spray available.
LT SPIITIONS LK TRKMT 120 ROUGH TOP LK OMNITHN 150 WHIT PV 120 xcellent Tracking riction Surface ut and brasion Resistant Non-Marking mbossed PV Rough Top PV Smooth Polyurethane Smooth PV Strength 120 PIW 120 PIW 150 PIW 120 PIW Thickness.1".23".16".14" LT LK TRKMT 120 haracteristics over Lacing lipper Other types available upon request OPTIONL QUIPMNT N VIS IX NGL IX HNNL UHMW IX NGL - vailable in fixed or adjustable with multiple contact surfaces. llows product to be guided and kept in place within the conveying surface. Side guides are bolted to the conveyor frame. ixed ngle Side Guides - Standard 1 1/2" x 2" high or 1 1/2" x 6"high formed, 10 ga. angle ixed hannel Side Guides - Standard 2 1/2" high or 3 1/2" high, 10 ga. formed channel UHMW ixed ngle Side Guides - Replaceable UHMW face provides wear protection for angle guides JUSTL RIL UHMW TLL IX HNNL TLL IX HNNL SI GUIS WITH GUSSTS djustable Rail UHMW Side Guides - Replaceable UHMW face provides wear protection on rails, width and height adjustable Tall ixed hannel Side Guides - Higher formed angle for tall product Tall ixed hannel Side Guides with Gussets - Higher formed and gusseted angle for tall product Tall ixed hannel Side Guides with Threaded Rod Higher formed angle with threaded rod adjustment for tall product TLL IX HNNL WITH THR RO IX NGL WITH SPR R SKTWHL ixed ngle Side Guides with Spacer ar - Spacer bar allows side guide to overlap belt to remove gap Skatewheel Side Guides - Vertically mounted skatewheels Side Guides with elt Skirts - elt skirts attached to formed angle to keep product off the belt edges lared Side Guides - unnel type side guides for guiding product during loading (v-guided belt only) WITH LT SKIRTS LR KN R SUPPORTS SUPPORTS - vailable with caster options for portability. Supports are designed to be bolted to the conveyor frame. Supports are shipped loose. Knee race Supports Portable H-Stands PORTL H-STNS SUPPORTS 25
OPTIONL QUIPMNT N VIS ILING HNGRS - llows conveyor to be suspended from the ceiling. Threaded rod is attached to support steel under the conveyor frame. eiling attachments to threaded rod by others. SI VIW ILING HNGRS N VIW 5/8-11 threaded rod x 10' LT LING Recessed Hidden RSS HIN lapover Standard (xposed) Other types available LPOVR LT LING STNR (XPOS) RIV STYL Shaft Mount nd rive Overtop nd rive SHT MOUNT N RIV LR Motorized Pulley MOTORIZ RIV STYL OVRTOP N RIV NOS - Ideal for small product transfer. Must be center driven. NOS V-GUI ONSTRUTION - Required if length-to-belt width ratio is less than 2.5:1. Uses x 1 1/2" x 12 ga. galvanized frame. Not available with center drive. Proper belt tracking still required. V-GUI ONSTRUTION TROUGH ONVYOR - onveys cylindrical products. onveyor slider or roller bed is V-shaped. TROUGH ONVYOR STINLSS STL - onveyors are available in stainless steel materials for washdown applications or harsh environments 26
U LT ONVYOR URV WHY U? Provides the most versatile means of handling a wide variety of products 45, 60, 90, 180 and special degree curves in 1 increments chieves higher speeds than other conveyor types Many belt options for specific applications Precision, low maintenance belt guidance system Rigid, welded construction provides smooth conveyance even at higher speeds ommon applications include assembly, sorting, inspecting and transportation = elt Width (W) (1" Increments) = Outside Radius (OR) = Inside Radius (IR) = enter Line Radius = rame Height = ottom of rame to TO G = Gap G 90 URV 3 1/8" LT HN URV STNR ONIGURTIONS OUTSI RIUS LT WITH INSI RIUS NTR LIN RIUS RM HIGHT OTTOM O RM TO TO GP (PPROX.) T OR NTR LIN RIUS MIN MX NORM MXIMUM ISTRIUT LIV LO (in.) (in.) (in.) (in.) (in.) (in.) G (in.) (lbs.) 36 48 60 72 87 114 6 30 33 3 1/8 4 1/8 3 3/8 8 28 32 9 7/16 7 9/16 3 4 3 1/4 12 24 30 2 7/8 3 3/4 3 1/8 12 36 42 3 5/8 5 1/8 4 18 30 39 3 1/4 4 3/4 3 5/8 10 15/16 9 1/16 20 28 38 3 1/4 4 5/8 3 5/8 24 24 36 3 4 3/8 3 3/8 24 36 48 4 1/8 5 7/8 4 9/16 30 30 45 12 3/8 10 9/16 3 7/8 5 7/8 4 3/8 36 24 42 3 5/8 5 1/8 4 36 36 54 4 1/4 6 5/8 4 7/8 42 30 51 13 7/8 12 4 6 1/4 4 5/8 48 24 48 3 3/4 5 7/8 4 1/4 36 51 69 4 1/4 7 1/4 5 42 45 66 12 3/4 10 7/8 4 1/8 6 7/8 4 7/8 48 39 63 3 7/8 6 5/8 4 5/8 42 72 93 4 1/2 7 3/4 6 48 66 90 12 3/4 10 7/8 4 1/8 7 1/4 5 3/4 52 62 88 4 7 5 5/8 400 400 600 700 800 800 27
RIV SPIITIONS LT HN URV RIGHT HN URV STNR SPIITIONS LT - lack Trackmate 120 with exposed clipper lacing GUI WHLS - Precision bearing, nylon wheel RM - 10 ga. formed steel slider bed pans welded in high x 10 ga. formed steel channel frames with welded in end couplers ONSTRUTION - Welded frames, spreaders and welded in end couplers LT WITH - 6" to 52" in 1" increments URV GRS - 45, 60, 90, 180 and special degree curves in 1 increments RIV STYL - Shaft mount end drive SP - Up to 200 PM MOTOR - 1/2 HP through 2 HP, 1750 RPM, -face, 208-230-460V/3PH/60Hz, T xpanded product parameters available. or more information see Tech Handbook. RUR - Sealed, worm gear, -face MOUNT RINGS - Precision, sealed, pre-lubricated, self-aligning, flange mount ball bearing units with cast iron housing RIV - Tapered pulley with 1/4" vulcanized lagging TIL - Tapered pulley TK-UP - Screw type take-up assembly SUPPORTS - djustable H-style, welded to 88" from floor to top of roller. One support at every bed joint and at ends of conveyor. Supports are shipped loose. INISHS - Powder coat finish standard. Wet spray available. STNR LT SPIITIONS LT LK TRKMT 120 LK TRKMT 120 ROUGH TOP LK OMNITHN 150 WHIT PV 120 haracteristics xcellent Tracking riction Surface ut and brasion Resistant Non-Marking over mbossed PV Rough Top PV Smooth Polyurethane Smooth PV Strength 120 PIW 120 PIW 150 PIW 120 PIW Thickness.1".23".16".14" Lacing lipper Other types available upon request 28
OPTIONL QUIPMNT N VIS - llows product to be guided and kept in place within the conveying surface. Side guides are welded to the conveyor frame. ixed ngle Side Guides - 10 ga. rolled, 2" high. Other heights available. IX NGL KN R SUPPORTS SUPPORTS - vailable with caster options for portability. Supports are designed to be bolted to the conveyor frame. Supports are shipped loose. Knee race Supports Portable H-Stands PORTL H-STNS SUPPORTS SI VIW 5/8-11 threaded rod x 10' N VIW ILING HNGRS ILING HNGRS - llows conveyor to be suspended from the ceiling. Threaded rod is attached to support steel under the conveyor frame. eiling attachments to threaded rod by others. RSS LPOVR HIN STNR (XPOS) LT LING LT LING Recessed Hidden lapover Standard (xposed) Other types available STINLSS STL - onveyors are available in stainless steel materials for washdown applications or harsh environments 29