PRECISION REFLEX. Thank you for your past support and we look forward to helping you in the future. Sincerely, All of the staff at PRI

PRECISION REFLEX Precision Reflex, Inc., (PRI) is a family owned business that was started on January 1, 1979, to manufacture shooting accessories for all types of firearms and many different styles of shooting. Our customers have always ranged from the casual shooter to the more serious law enforcement and military users on the front lines. Our products for many types of firearms, from bolt guns to fully auto assault weapons, have worn not only the proud PRI logo but also the logos of many of the industry s leading manufacturers. We are appreciated for our quality products, delivered on time, responsive to the customer s needs and at a reasonable cost. The products in our inventory are not only our own but include many of our customers hottest items which can be shipped at a moment s notice. The materials and finishes of the many PRI shooting products incorporate the latest and best available at a reasonable cost. Your satisfaction with a PRI accessory that will withstand the use and the environment you live is important to us. The PRI facility is in the middle of an industrial park in rural mid-west Ohio surrounded on three sides by other manufacturers and on one side the open fields of corn and soybeans of a local farmer. The building itself is modern, up to date and well-kept with grounds that reflect our appreciation of nature and the values of a small rural Ohio community. The interior of the clean, well light facility and the many multi axis machining centers are maintained with pride by their operators. Our employees are well trained, conscientious, and have been with PRI for many years. They all appreciate the importance of doing their job correctly and know the consequences of failure with a shooting accessory. All of them welcome the opportunity to help a customer with a problem and often man the PRI booth at the shows we do. PRI has served the shooting industry for 37 years now and you, the customer, will notice the next generation is now handling the phone and general management problems. They are experienced, bright individuals who know what they are doing and look forward to working with you in the future. Thank you for your past support and we look forward to helping you in the future. Sincerely, All of the staff at PRI 3

STEEL + ALUMINUM RINGS SHORT + LONG BASES SPECIALTY RAILS + BASES SCOPE RINGS NIGHT VISION + SHOTGUN

1 STEEL STANDARD RINGS Tactical rings are constructed of high strength steel, Parkerized finish, TORX head top screws. Designed to withstand the heavy recoil and extreme service. From bottom of scope to top of rail is.320 for Standard, and.700 for Extra High. Weights are.42 lbs (6.7oz) and.49 lbs (7.8oz). 01-001-01.320 STANDARD 01-001-02.700 EXTRA HIGH 1 ALUMINUM RINGS PRI tactical rings are constructed with hard coat anodized aluminum and use 4 Torx top screws. Designed to withstand heavy recoil and extreme service. The rings measurement from the base of the scope to the top of the rail is.320 for standard and.700 for extra high. Weights are.24lbs (3.9oz) and.28lbs(4.5oz). 01-001-03 STANDARD 01-001-04 EXTRA HIGH 30mm ALUMINUM RINGS STANDARD, INTERMEDIATE & EXTRA HIGH Tactical rings are constructed with hard coat black anodized aluminum and use 4 TORX head top screws. Designed to withstand the heavy recoil and extreme service. From bottom of scope to top of rail is.360 for standard,.460 for Intermediate and.809 for extra high. Weights are.265 lbs (4.2oz),.275 (4.4oz) and.315 (5oz). 01-030-04 STANDARD 01-030-05 INTERMEDIATE 01-030-03 EXTRA HIGH + ALL OF OUR BASES ARE MADE TO FIT PICATINNY DOVETAIL RAILS 30mm STEEL RINGS STANDARD, INTERMEDIATE & EXTRA HIGH Tactical rings are constructed of high strength steel, Parkerized finish. Rings have Torx head top screws. Designed to withstand the heavy recoil and extreme service. From the bottom of the scope to the top of the rail is.390 for the standard,.460 for the intermediate, and.750 for the extra high. Weights are.265 lbs (6.9oz),.465 (7.4oz) and.520 (8.3oz). 01-030-01 STANDARD 01-030-07 INTERMEDIATE 01-030-02 EXTRA HIGH 34mm STEEL STANDARD RINGS Tactical rings are constructed of high strength steel, Parkerized finish, TORX head top screws. Designed to withstand the heavy recoil and extreme service. All PRI mounts are made to Mil Spec 1913 Picatinny Standard. From bottom of scope to top of rail is.590 and weighs.525 lbs (8.4oz). 01-034-01 34mm STEEL XX HIGH RINGS These extreme rings are designed for the magnum size European scopes. Constructed of high strength steel with a Parkerized finish. ½ hex nut and 6 TORX drive screws per cap. Fits on Picatinny style rails. Built to hold the heaviest scope on those earth shaking big bore rifles. From bottom of scope to top of rail is 1.042 and weighs.840 lbs (13.4 oz). 01-034-04 MEGA STEEL RINGS The tactical 30mm heavy duty rings with 1 of base gripping power are constructed of high strength steel with Parkerized finish, TORX head top screws. Designed to withstand the heavy recoil and extreme service. From bottom of scope to top of rail is.750 and weighs.780 lbs (12.5oz). 01-MEGA-01 SCOPE RINGS 6 7

MEGA RINGS - LONG RANGE The tactical 30mm heavy duty rings with 25 MOA and spacer bar have 1 of base gripping power. They are constructed of high strength steel, Parkerized finish, TORX head top screws. Designed to withstand the heavy recoil and extreme service. From bottom of scope to top of rail is.750 or base to centerline of scope ring is 1.34 and weighs.77 lbs (12.3oz). 01-MEGA-02 34mm STEEL HEAVY DUTY STANDARD RINGS These extreme rings are designed for the magnum size scopes. Constructed of high strength steel with parkerized finish. ½ hex nut and 6 Torx drive screws per cap. Fits on Picatinny style rails, built to hold the heaviest of scopes on those big bore rifles. From the bottom of the scope to the top of the rail is.590. Width of the scope base is 1.0 and weighs.78 lbs (12.4oz). 01-034-05 34mm STD HEIGHT ALUMINUM RINGS These 34mm Aluminum rings are of standard height 1.26 from centerline of the rings to the top of the base or.590 from the bottom of the scope to the top of the base. Four top torx screws secure the caps and ½ crossbolts lock it onto the base. The rings are constructed of hard coat black anodized aluminum. Weight is.3 lbs (4.8oz). 01-034-02 30mm AIMPOINT RING Aimpoint rings are a non-adjustable mount at 1.175 high. The ring is constructed of hard coat anodized aluminum with a matte finish. The top piece is constructed of steel for maximum holding power. From bottom of scope to top of rail is.580 and weighs.24 lbs (3.8oz). 01-0031 30mm AIMPOINT RING Aimpoint rings are a non-adjustable mount at 1.675 high. The ring is constructed of hard coat anodized aluminum with a matte finish. The top piece is constructed of steel for maximum holding power. Designed for military use on the M-4 carbine. From bottom of scope to top of rail is 1.08 and weighs.25 lbs (4oz). 01-0030 30mm RING SPACERS PRI Delrin spacers have a recoil shoulder at one end and are split to easily go onto your scope and into a set of 30mm rings. An economical solution to adapting your 30mm rings to a 26mm or 1 scope or flashlight. 01-130-01 1 SPACER 01-126-01 26MM SPACER M68B MOUNT - AIMPOINT This is a light-weight, adjustable height mount for CCOS. Works well with night vision, gas mask, or helmet. NSN # 5855-01-485-7755 04-CCOS SCOPE RINGS + PLEASE NOTE: RING HEIGHT SHOULD BE MEASURED FROM THE BOTTOM OF THE SCOPE TO THE TOP OF THE RAIL. 8 9

1, 30mm & 34mm CANTILEVERED RING SETS & REPLACEMENT RINGS PRI is now offering 1 and 30mm scope rings in high and low versions and 34mm low ring only versions. This one piece cantilevered base attaches to the upper receiver of an AR platform and provides a very secure locking platform. The rings and base riser are constructed of hard coat black anodized aluminum. The mount is secured to the receiver by two thumb screws for quick mounting but a coin or tool is required to loosen from the receiver. Low or high ring option. +MEASUREMENTS ARE FROM THE TOP OF RECEIVER TO THE CENTERLINE OF THE RINGS. 01-001-10L 1 LOW RINGS (1.22 ) 01-001-10H 1 HIGH RINGS (1.5 ) 01-030-10L 30MM LOW RINGS (1.3 ) 01-030-10H 30MM HIGH RINGS (1.5 ) 01-034-10H 34MM RINGS (1.38 ) 01-001-10LR 1 LOW REPLACEMENTS 01-001-10HR 1 HIGH REPLACEMENTS 01-030-10LR 30MM LOW REPLACEMENTS 01-030-10HR 30MM HIGH REPLACEMENTS 01-034-10HR 34MM REPLACEMENTS MINI RED DOT BASE or RAIL These mounts are designed for the Trijicon RMR. The mounts are designed to mount around a 30mm or 1 scope tube, but also have the option to be mounted on top of PRI s aluminum scope rings. The mounts are constructed of hard coat black anodized aluminum. 09-01-01 1 BASE 09-01-02 1 RAIL 09-30-01 30MM BASE 09-30-02 30MM RAIL CANTILEVER MOUNT This 30mm scope ring is designed to allow the operator to extend any red dot scope with a 30mm tube out beyond the rail. This is a 2 extension from the base. This base is constructed of hard coat black anodized aluminum with a light weight steel cap, with 4 cap screws. Elevation is 1.5. 01-0032 GATOR GRIP RAIL RISER PLATFORM w/ RINGS This Gator grip platform will allow different items from 1, 30mm or 34mm scope rings. The platform is 7 long and has an elevation starting height of.600. The mount is constructed of hard coated black anodized aluminum and high strength steel. +MEASUREMENTS ARE FROM THE CENTERLINE OF RINGS TO BASE. 05-068-01L 1 INCH LOW (1.35 ) 05-068-30L 30MM LOW (1.43 ) 05-068-01H 1 INCH HIGH (1.63 ) 05-068-30H 30MM HIGH (1.63 ) 05-068-34H 34MM HIGH (1.63 ) + CANTILEVER AND GATOR GRIP MOUNT USE SAME REPLACEMENT RINGS. SCOPE RINGS 10 11

The Short Action one piece high strength steel bases give a solid platform for mounting standard or large objective scopes. Accepts Weaver style rings. Base is 5.5 in length. 1913 Profile 02-216-01 REMINGTON 700 The military Short Action one piece High strength steel bases give a solid platform for mounting standard or large objective scopes. Accepts Weaver style rings. Base is 7 in length. 1913 Profile 02-176-01 SAVAGE 02-176-04 SAVAGE ACCU TRIGGER 02-218-01 WINCHESTER MOD 70 Remington 700 Military short action one piece with cut out over the action. Compatible with all Mil Spec products has 1913 style rail slots to accommodate compact scopes or night vision devices. Base is constructed of 1141 steel and has a parkerized finish. Base comes with mounting screws and is 7 long and weighs 5 ounces. 02-216-04 REMINGTON 700 MILITARY 02-216-0584 REMINGTON 700 WITH #8-40 SCREWS The Short Action steel base with full 1913 rail is constructed of high strength steel, compatible with all mil spec products. Base is 7 in length. Ambidextrous 02-216-05 REMINGTON 700 MILITARY 02-216-05B REMINGTON 700 MILITARY W/20 MOA 02-176-03 SAVAGE 02-176-03B SAVAGE W/ 20 MOA 02-176-05 SAVAGE ACCU TRIGGER 02-176-05B SAVAGE ACCU TRIGGER W/ 20 MOA 02-218-03 WINCHESTER MOD 70 MIL. + ALL OF OUR BASES COME WITH MOUNTING SCREWS Long Action steel base with full 1913 rail is constructed of high strength steel, compatible with all mil spec products. Base is 7 in length. Ambidextrous 02-217-06 REMINGTON 700 MILITARY 02-217-06B REMINGTON 700 MILITARY W/ 20 MOA 02-177-02 SAVAGE 02-177-02B SAVAGE W/ 20 MOA 02-177-04 SAVAGE ACCU TRIGGER 02-177-04B SAVAGE ACCU TRIGGER W/ 20 MOA 02-217-0684 REMINGTON 700 WITH #8-40 SCREWS Long Action base with full 1913 rail is constructed of hard coat anodized aluminum, compatible with all mil. Spec products. Base is 7 in length. Ambidextrous 02-217-07 REMINGTON 700 02-217-07A REMINGTON 700 W/ 15 MOA 02-217-07B REMINGTON 700 W/ 20 MOA 02-217-07C REMINGTON 700 W/ 25 MOA Military Long Action one piece is constructed of high strength steel, compatible with all mil spec products. Designed to accommodate compact scopes or night vision devices. Base is 7 in length. 1913 Profile 02-217-04 REMINGTON 700 MILITARY 02-177-01 SAVAGE 02-177-03 SAVAGE ACCU TRIGGER The commercial Long Action one piece is constructed of high strength steel. It provides a solid platform for mounting standard or large objective scopes. Accepts Weaver style rings. Base is 7 in length. 1913 Profile 02-217-01 REMINGTON 2 1/2 3 1/4 BASES LONG + SHORT 12 13

STANDARD 2 PIECE TACTICAL BASE The 2 piece high strength steel base can be used for Long or Short Action. Base is available in standard or extra high and is compatible with all mil spec products. 02-216-02 REMINGTON 700 STANDARD 02-216-03 REMINGTON 700 EXTRA HIGH 02-176-02 SAVAGE STANDARD 02-176-06 SAVAGE ACCU TRIGGER 02-218-02 WINCHESTER REMINGTON 700 SHORT ACTION FULL 1913 RAILED [STEEL BASE] This Short Action steel base with full 1913 rail is constructed of high strength steel, compatible with all mil spec products. Base is 6 in length. Ambidextrous 02-216-06 REMINGTON 700 02-216-0684 REMINGTON 700 WITH #8-40 SCREWS REMINGTON 700 SHORT ACTION FULL 1913 RAILED [ALUMINUM BASE] Short Action Aluminum base with full 1913 rail is constructed of hard coated anodized aluminum, compatible with all mil spec products. Base is 7 in length. Ambidextrous 02-216-07 REMINGTON 700 02-216-07A REMINGTON 700 W/ 15 MOA 02-216-07B REMINGTON 700 W/ 20 MOA 02-216-07C REMINGTON 700 W/ 25 MOA + ALL OF OUR BASES ARE MADE TO THE PICATINNY MILITARY STANDARD 1913 + ALL STANDARD BASES WITH FULL PICATINNY RAILS COME WITH 6-48 SCREWS 8-40 SCREWS AVAILABLE UPON REQUEST REMINGTON 700 SHORT ACTION [LEFT HAND BASE] The Military Short Action one piece high strength base gives a solid platform for mounting standard or large objectives Scopes. Accepts Weaver style rings. Base is 7 in length. 02-216-09 REMINGTON 700 REMINGTON 700 8 7/8 RAIL mm FRONT EYE RELIEF Long & Short Action steel base with Full 1913 Rail is constructed of high strength steel, compatible with all mil spec products. Base is 8 7/8 in length to provide the operator with additional rail for eye relief or night vision equipment. Ambidextrous 02-216-10 SHORT ACTION 02-217-10 LONG ACTION 02-216-10B SHORT ACTION W 20MOA 02-217-10B LONG ACTION W 20MOA REMINGTON 700 8 7/8 RAIL with REAR EYE RELIEF Long & Short Action steel base with Full 1913 Rail is constructed of high strength steel, compatible with all mil spec products. Base is 8 7/8 in length to provide the operator with additional rail for eye relief or night vision equipment. Ambidextrous 02-216-12 SHORT ACTION 02-217-12 LONG ACTION 02-216-12B SHORT ACTION W/ 20 MOA 02-217-12B LONG ACTION W/ 20 MOA REMINGTON 7615 BASE The Remington 7615 with Full 1913 rail is constructed of high strength aluminum, compatible with all mil spec products. Base is 6 in length. 02-7615-2 BASES LONG + SHORT 14 15

REMINGTON 700 UTILITY SYSTEM The aluminum rail is 4 in length and can be installed on the bottom side of the stock for a swivel or bi-pod post or remove one or the other and use it for a flashlight. 02-700-1- RAIL ASSEMBLY 02-700-2 - SLING SWIVEL 02-700-3 - SWIVEL STUD GALIL RIFLE MOUNT Lightweight mount attaches to side of the receiver using dove tailed mounting block. This mount is ideal for any style optic or sighting system. Rail is 5.5 in length. 02-090 WEAVER STYLE 6-48 x.288 SCREWS Replacement screws for all PRI bases. TORX DRIVER HEX DRIVER 02-648-01 SET OF 4 02-648-01H SET OF 4 02-648-02 SET OF 12 02-648-02H SET OF 12 BUILD YOUR OWN BASE This option allows the shooter to choose any length of base desired. PRI supplies an 9 or 18 length of base for you to machine to the chosen length. Bases are offered in both steel and aluminum. The top of the rail is made and held to the Picatinny mil standard 1913 Furnished without a finish, or with glass bead blast only. Aluminum rails from the bottom to the top of the rail is.750 steel is.530. ALUMINUM 9 RAIL ALUMINUM 18 RAIL STEEL 9 RAIL STEEL 18 RAIL 02-BYO-9A 02-BYO-18A 02-BYO-9S 02-BYO-18S VZ58 CUSTOM FOREARM RAIL SYSTEM PRI designed a rail for the VZ58 rifle. This rail allows the shooter the option to add optics to the rifle. The rail requires no machining or alterations to the weapon. The rail replaces the upper handguard. 02-VZ58 SPECIALTY BASES ACCURACY TACTICAL QUALITY 7 ALUMINUM BASE This base attaches to the 11mm rail on top of the Accuracy rifle and designed to accommodate compact scopes or night vision devices. Constructed of high strength aluminum Full 1913 Top Rail. 02-327-02 STEYR STEEL 1913 BASES These bases are for the Steyr and the A-Bolt family of rifles. Bases are constructed of high strength steel and are compatible with all Mil. Spec products. The bases come in 4 different configurations. 02-316-01 2 PIECE BASE BAR SIDE RAIL ATTACHMENT This side rail is designed to mount on the side of the BAR rails either the step down or the straight. This allows the operator to mount a light or a PEQ unit. Rail is 4 in length. Rail hangs out.950 from the base. 02-BAR-SR BAR STRAIGHT SIDE RAIL MOUNT This economical side rail for the PRI VZ58 mount or PRI s long night vision rails is a small lower profiled rail. This rail is ideal for mounting flashlights or small optics. The rail is 2.5 long and hangs out from the base just over a.5. 02-BAR-SR2 16 17

REMINGTON 700 & SAVAGE STEP DOWN RAIL This Long & Short Action 7075 T6 aluminum base with full 1913 rail has two different elevations. It is designed to place night vision in front of the scope. This base is 16 in length. Ambidextrous. It requires #8-40 screws for mounting. Mounting will require altering of the receiver. Bar rail is designed for the Remington 700 and the Savage Accu Trigger models. Remington models available with 25 MOA. 02-216-08-648 REMINGTON 700 SHORT ACTION 02-217-08 REMINGTON 700 LONG ACTION 02-176-07 SAVAGE ACCU TRIGGER SHORT ACTION 02-216-13C REMINGTON 700 S.A. [ FRONT OBJECTIVE CLEARANCE + 25 MOA ] 02-217-13C REMINGTON 700 L.A. [ FRONT OBJECTIVE CLEARANCE + 25 MOA ] 02-216-08 REMINGTON 700 SHORT ACTION 02-217-08-648 REMINGTON 700 LONG ACTION 02-218-08 FNH SHORT ACTION REMINGTON 700 / FNH STRAIGHT BAR RAIL This Long & Short Action 7075 T6 aluminum Base with full 1913 rail has a same plane elevation. The rail is designed to place night vision in front of your optics or scope. This base is 16 in length. Ambidextrous. Mounting requires #8-40 screws and the receiver may require altering. BAR rail is designed for the Remington 700. 02-216-11-648 REMINGTON 700 SHORT ACTION 02-217-11 REMINGTON 700 LONG ACTION 02-216-11 REMINGTON 700 SHORT ACTION 02-217-11-648 REMINGTON 700 LONG ACTION LITTON PVS 17 HI / LOW MOUNT / THUMB SCREW A unique night vision mount that has a choice of two different positions, high or low. The user makes the selection to suit his needs. Aluminum and steel construction for strength without weight. 04-PVS-17-1 M69-AN-PVS 14 MOUNT MADE FOR THE I.T.T. PVS14 NIGHT VISION POCKET SCOPE An adjustable height carrier with locators to prevent slippage horizontally or vertically during firing. A calibrated scale to assist the user in returning the carrier to a favored sweet spot. Two thumb screws with integral self-locking system and slots for easy removal. A.R.M.S throw lever base. 1.54 to 2.75 elevation adjustment. NSN-5855-01-482-6164 04-PVS-14 M69-AN-PVS 18 MOUNT MADE FOR THE LITTON PVS18 NIGHT VISION POCKET SCOPE. An adjustable height carrier with locators to prevent slippage horizontally or vertically during firing. A calibrated scale to assist the user in returning the carrier to a favored sweet spot. A steel strap locks down over the sight with a self locking thumb screw system. NSN# 5855-01-485-7749 04-PVS-18 SHOTGUN TOP RAILS The PRI shotgun top rails are made of high strength aluminum and have a hard coat anodize finish. The rail is made to the Picatinny standard and accepts the many accessories available to the military. Caution: Remington and Savage shotguns will require drilling and tapping. 08-091 WINCHESTER #1300 08-092 MOSSBERG #590 08-090 REMINGTON 08-093 SAVAGE 08-094 BENELI NIGHT VISION + SHOTGUN 18 19

SIGHTS + BARRELS CHARGING HANDLES RAILS + FOREARMS GAS BLOCKS + MAGS ACCESSORIES AR15 + M16

RAIL MOUNTED FLIP-UP FRONT SIGHT The PRI forearm rail mounted front sight is designed just like the original barrel mounted flip up front sight. The rail mounted sight works on any rail that is mounted at the same levels as the receivers rail. The sight is designed to lay towards the rear in the down position. The sight then can be raised and locked in the up position for iron sight use. 05-0028 BLACK 05-0028DE DARK EARTH + USES STANDARD M-16 FRONT SITE POST FLIP-UP FRONT SIGHT The PRI FUFS eliminates the shadow cast on optical sights and the full circle hood increases the speed of target pick up. The sight post locks in the up postion and detent button must be depressed to lower. Constructed of high strength steel with a light-weight aluminum top post. Sight has integral gas system. 05-0025.750 WITH CROSSBOLT 05-0026.625 WITH CROSSBOLT + USES STANDARD M-16 FRONT SITE POST FLIP-UP FRONT SIGHT.750 The PRI FUFS eliminates the shadow cast on optical sights and the full circle hood increases the speed of target pick up. The sight post locks in the up postion and detent button must be depressed to lower. Constructed of high strength steel with a light-weight aluminum top post. Requires special machining of the barrel. Sight has integral gas system. Requires adding set screw dimples to barrel. 05-0027 SIGHT W/ SET SCREWS + USES STANDARD M-16 FRONT SITE POST FIXED FRONT + REAR SIGHT PRI s fixed front and rear sights are constructed of hard coated black anodized aluminum. The sights are set to industrial standard of 1.4 from the receiver. The front sight uses a standard A2 front post with ¼ turn spring detent. 05-0128 FIXED FRONT SIGHT 05-0129 FIXED REAR SIGHT FLIP-UP FRONT + REAR SIGHT PACKAGE This includes the rear sight that works on the same plane aperture system that allows the operator to choose between two different setting without losing zero. The front sight is designed like the original barrel mounted flip up front sight. Both sights provide a low profile in the down position. Both sights work the same; Lift into the up position and they automatically lock. To lower, depress the detent pin and push down. 05-2829 BLACK 05-2829DE DARK EARTH FLIP-UP REAR SIGHT PRI s Flip Up Rear Sight is designed to work on a same-plane aperture system that allows the operator to choose between two different settings without losing zero. The low profile sight will allow the use of optics and top rails. The sight folds up into a locked and secure position with windage adjustment. 05-0029 BLACK 05-0029DE DARK EARTH RAIL MOUNTED FLIP-UP FRONT SIGHT 1.4 1.4 PRI low profile rail mounted flip up front sights are designed to work with a variety of different forearm models and makes. The front sight is constructed of light weight hard coated black anodized aluminum. The sight is designed like all PRI sights, they lift up freely and lock in the up position. To lower depress the detent button. We use standard front A2 post that rotate in ¼ turns increments. There are three different elevations not including the original rail mounted front sight. The height listed below is from the top of post in center position to the top of the rail sight is mounted to. 05-B028 AR15 DELTA 1.2 05-A028 PRI S DPMS ROUND / ARMALITE DELTA FOREARMS 1.325 05-C028 PRI S DPMS DELTA FOREARMS 1.55 AR 15 + M16 ACCESSORIES 22 23

M84 GAS BUSTER CHARGING HANDLE FOR M-16+AR-15 The Gas Buster charging handle is a safety device with ergonomic design that diverts harmful gases, oil and dirt particles away from the shooter. The gas buster comes with a military big latch, combat or flat latch. +THIS IS A PRI PATENTED PRODUCT- SAFETY APPROVED & USED BY U.S. MILITARY - NSN# 1005-01-537-0026 FLAT LATCH 05-0030 BIG LATCH 05-0031 COMBAT LATCH 05-0032 M84 GAS BUSTER CHARGING HANDLE 9mm VERSION These specially designed gas buster handles work on standard M16 and AR15 receivers that are running the 9mm carrier. These handle are designed different on the end to work with the 9mm carriers. WITH COMBAT LATCH MILITARY BIG LATCH + SHOWN WITH MILITARY LATCH 05-009CL 05-009ML FLAT COMBAT MILITARY BIG CHARGING HANDLE LATCHES FLAT COMBAT MILITARY BIG These replacement latches for the M84 charging handle are constructed of high strength steel. The Combat Latch is oversized and 17% larger than the original military latch and has a flatter serated front edge for better grip and quick comfortable operation. The Military Big (Weenie) is oversized and provides for quick comfortable operation. 05-0040 - FLAT 05-0042 - COMBAT 05-0041 - MILITARY BIG FOREARM SLING SWIVEL PRI Forearm sling swivel is designed to mount on the PRI carbon fiber forearm, to allow the sling to be attached to the forearm and the butt stock of the rifle. Constructed of hard coated black oxidized aluminum. 05-070-04 ROUND FOREARM 05-071-04 DELTA FOREARM RAIL MOUNTED SLING SWIVEL This rail mounted sling swivel is designed to attach to a Picatinny rail on side of forearm. This mount slides over the end of the rail and locks into place with a crossbolt. Mount is constructed of hard coat black anodized aluminum with quick release sling swivel. 05-070-06 AR 15 + M16 ACCESSORIES FRONT SIGHT ADJUSTMENT TOOL This small tool is used for adjusting PRI s closed hooded front sight post. Tool has 4 index fingers for depressing the locking tab and rotating it clockwise or counter clockwise. Tool is constructed of steel with a black finish and knurled grip. 05-0085 PRI M16 / AR15 CARRY HANDLE MOUNT The mount fits into the carry handle channel and is located by its mounting surfaces and grips the front portion of the receiver. Co-Witness is in lower 3rd of the Eotech Scope and only with the standard height mount. 05-0060 STANDARD EOTECH CO-WITNESS 05-0061 HIGH RIDER NO EOTECH CO-WITNESS 24 25

FAT BOY REPLACEMENT GAS TUBE FOR M4 CARBINE The Fat Boy gas tube is a replacement tube for the M16, M4 rifles that use the 9.8 long tube. The Fat Boy s greater internal volume reduces cycle rate of the weapon down to 700/850 rounds per minute. 05-0050 STRAIGHT GAS TUBE FOR.875 +.936 ADJUSTABLE GAS BLOCKS This 304 stainless steel gas tube is designed to work with the.875 & the.936 diameter adjustable gas blocks. Because of the additional height of the gas blocks a straight gas tube is required. The AR15 is 15.165 in length and the AR10 is 15.495 in length. 05-SGT-RL 03-SGT-RL AR15 / DPMS.308 RIFLE LENGTH TUBE ARMALITE / AR10 RIFLE LENGTH TUBE REPLACEMENT GAS TUBES FOR AR S These gas tubes are constructed of 304 stainless steel and are designed to work with standard height gas blocks and receivers. These gas tubes come in 3 different lengths Carbine, mid and rifle length. 05-GTC AR15 CARBINE LENGTH GAS TUBE 05-GTM AR15 MID LENGTH GAS TUBE 05-GTR AR15 RIFLE LENGTH GAS TUBE QC BRAKES FOR 5.56mm The Quiet Control Brake/Compensator has a system of ports to reduce the recoil, the muzzle climb, and the noise heard by the shooter. The QCB is cut from solid stainless steel bar stock for greater resistance to heat and burnout. Specs: 304 stainless,.95 dia. x 2.05 long, Thread - ½ -28; Lead diameter -.750. Natural is a bead-blasted finish. Black is nitrite finish. Shim pack included. 05-0089 NATURAL TAPERED 05-0089B BLACK TAPERED 05-0092 NATURAL STRAIGHT 05-0092B BLACK STRAIGHT 05-0095 NATURAL CROWN 05-0095B BLACK CROWN 05-0092 05-0092B AE INC MILITARY BRAKE WITH COLLAR 05-0089 05-0095 05-0095B 05-0089B This brake is designed to work with or without a suppressor. When fired without the suppressor, the muzzle brake effectively reduces recoil and muzzle climb. The muzzle brake as designed eliminates upward and downward blast while reducing recoil. The brake is fitted with a collar that protects the suppressor mounting threads. Brake comes in two different calibers. 05-0091 6.8MM 5/8 X 24 THREADS 05-0090 5.56MM ½ X 28 THREADS.75.95 AR 15 + M16 ACCESSORIES 17 + 18 INCH BERGARA BARREL 4150 Chrome Moly Gun Metal. Phosphate Finish. Threaded for ½-28 thread. 17 Mid Length Gas System. 18 Rifle Length Gas System. 05-556-17BB 05-556-18BB 17 BERGARA BARREL WITH 1:9 TWIST 18 BERGARA BARREL WITH 1:9 TWIST SHIM WASHERS Shim washers for installing MSTN brakes. Washers are stainless steel and come in packs of 9. 2 of the.010, 2 of the.005, 3 of the.003, and 2 of the.002. We offer 2 different IDs for these washers. 5/8 or 1/2 inch IDs by.3/4 inch OD. 05-6893 5/8 X 3/4 INCH PACKS 05-6894 1/2 X 3/4 INCH PACKS 26 27

LOW PROFILE GAS BLOCKS PRI family of low profile steel gas blocks. Gas blocks are constructed of high strength steel. The set screws hold the block securely against the barrel for better gas seal. The bore inner diameters are.625,.750,.875 and.936. Set screws are.5 from screw to screw and it is.25 from front of gas block to to 1st set screw. Overall length of gas blocks are 1.0. 05-075-01.750 STEEL 05-075-02.750 STAINLESS 05-625-01.625 STEEL LARGE DIAMETER ADJUSTABLE GAS BLOCKS 05-875-01.875 STEEL 05-936-01.936 STEEL These low profile gas blocks with adjustable porting are constructed of high strength steel. This is the same design as the original low profile gas block but with the addition of some gas flow adjustment. The.875 &.936 diameter gas blocks require a straight gas tube. The width of the gas block is 1.15 length 1.0 Height from bore centerline to top of block is.945. The increased height doesn t allow it to sit under most hand guards. 05-875-02GT 05-936-02GT 05-875-02SGT + PLEASE NOTE: ADJUSTABLE GAS BLOCKS SHUT GAS OFF COMPLETELY!.875 BLACK.936 BLACK.875 STAINLESS LOW PROFILE ADJUSTABLE GAS BLOCK The AR15/M16 gas block with adjustable gas porting is constructed of high strength steel. This is the same design as the original low profile gas block but with the addition of some gas adjustments. These gas blocks are offered in.625 and.750 diameters. 05-625-02.625 STEEL 05-075-03.750 STEEL 05-075-03S.750 STAINLESS STEEL 05-875-02S.875 STAINLESS STEEL + PLEASE NOTE: ADJUSTABLE GAS BLOCKS SHUT GAS OFF COMPLETELY! 5.56mm REM SPC AR15 + M16 BARREL The 5.56 mm barrel is constructed of 416 bead blasted stainless steel. The barrel bore has a 1:8 twist. 5.56MM. Top Quality with M.O.A Accuracy. 05-556-16B 05-556-16BSB 05-556-16D 05-556-16DB 05-556-18B 05-556-18BSB 05-556-18D 05-556-18DB 16 BERGARA 5.56 STAINLESS BARREL 16 BERGARA 5.56 STAINLESS STEEL BLACK FINISH 16 DOUGLAS 5.56 STAINLESS STEEL 16 DOUGLAS 5.56 STAINLESS STEEL BLACK FINISH 18 BERGARA 5.56 STAINLESS BARREL 18 BERGARA 5.56 STAINLESS STEEL BLACK FINISH 18 DOUGLAS 5.56 STAINLESS STEEL 18 DOUGLAS 5.56 STAINLESS STEEL BLACK FINISH + 18 BARREL RUNS ON RIFLE LENGTH GAS SYSTEM + 16 BARREL RUNS ON MID-LENGTH GAS SYSTEMS AR 15 + M16 ACCESSORIES GAS BLOCK w/ PICATINNY RAIL This barrel mounted gas block has a 2 ½ top rail that is the same plane as the receiver. The rail is constructed of lightweight hard coat anodized aluminum. This gas block weights 2.5oz. Gas block fits over a.750 diameter barrel. Block locks into place with 2 crossbolts the same as our original gas block front sight. Centerline of bore to the top of the rail is 1.218. 05-075-04.750 DIAMETER 05-625-04.625 DIAMETER FLIP-UP FRONT SIGHT These sights are a combination of GenII + Gen III gas block flip-up front sights. They have an elevation adjustment wheel. 05-0025-G2.750 WITH CROSSBOLT 28 29

AR FORGED FLATTOP UPPER RECEIVER This receiver is constructed of 7075 T6 hard coat black anodized forged aluminum for superior wear and fit machined to Mil spec standards. The receiver comes with dust cover and forward assist installed. 05-556FR 05-556FR-DE BLACK DARK EARTH 5.56 CALIBER BOLTS These 5.56 bolts are constructed of carpenter steel 158 and have Nitride finish. The bolt is held to strict Military specifications for a drop in fit. The bolt has 3 split type gas rings. 05-556-BO AR15 MIL SPEC B5 BUTTSTOCKS AND ASSEMBLIES These B5 buttstocks are mil spec and can be purchased as a complete assembly or just the stock. They are available in Black or Flat Dark Earth. 07-CB5BS 07-B5B-B 07-B5B-DE AR15 REPLACEMENT ALUMINUM BARREL NUTS Gen III forearms replacement barrel nut for PRI s AR15 model forearms. Constructed of T6 7075 hard coated black anodized aluminum. ID 1.02. 05-073-BN AR15 REPLACEMENT ALUMINUM FOREARM COLLARS Gen III AR15 Replacement forearm collar for PRI s AR15 carbon fiber handguards. Constructed of T6 6061 Hard coated black anodized aluminum. 05-073-RFC COMPLETE B5 SYSTEM ASSEMBLED BUTTSTOCK ONLY BLACK FINISH BUTTSTOCK ONLY FDE FINISH AR 15 + M16 ACCESSORIES SEMI + FULL AUTO BLACK NITRIDE BOLT CARRIER GROUPS Carrier features 8620 steel with 158 CS bolt, tool steel extractor and cam pin. Black nitriding is a thermal chemical diffusion of nitrogen and carbon into the surface of the steel. This process increases wear-resistance, fatigue strength, corrosion resistance and lubricity and cosmetic appeal. 05-556-BCA-N 05-556-BCSA-N AR15 CARRIER GROUP HEAVY AR15 CARRIER GROUP LITE AR15 REPLACEMENT STEEL BARREL NUTS Gen III forearms replacement barrel nut for PRI s AR15 model forearms. Constructed of high strength steel with a parkerized finish. ID of barrel nut is 1.02. 05-074-01 30 31

NATURAL GEN III AR15 + M16 FREE FLOAT FOREARM CARBINE LENGTH This forearm is constructed of light weight, high strength carbon fiber, aluminum, and high strength steel for the best possible combination of weight and strength. The carbon fiber also reduces the amount of heat transferred to the shooter during rapid fire or high volume. Forearm weight is 11 oz. 05-073-01 7 NATURAL 05-073-01B 7 BLACK 05-073-01DE 7 DARK EARTH NATURAL BLACK BLACK GEN III AR15 + M16 FREE FLOAT FOREARM INTERMEDIATE LENGTH This forearm is constructed of lightweight, high strength carbon fiber, aluminum, and high strength steel for the best possible combination of weight and strength. The carbon fiber also reduces the amount of heat transferred to the shooter during rapid fire or high volume. Forearm weight is 14 oz. All rails are moveable. 05-073-02 9 NATURAL 05-073-02B 9 BLACK 05-073-02DE 9 DARK EARTH DARK EARTH DARK EARTH +ALL AR15 ROUND TUBES ARE 1.75 INNER DIMENSION + 2.00 OUTER DIMENSION +PRI USES CERAKOTE PAINT ON THE COLOR-FINISHED FOREARMS NATURAL 15.5 BLACK 14.5 BLACK 12.5 GEN III AR15 + M16 FREE FLOAT FOREARM RIFLE LENGTH The forearm is constructed of light weight, high strength carbon fiber, aluminum, and high strength steel for the best possible combination of weight and strength. The carbon fiber also reduces the amount of heat transferred to the shooter during rapid fire of high volume. Forearm weight is 16.5 oz. All rails are moveable. Forearms come with 4 rails: 8 ½ at 12 o clock and 3.3 rails at 3, 6, and 9 positions. 05-073-03 12.5 NATURAL 05-073-03B 12.5 BLACK 05-073-03DE 12.5 DARK EARTH 05-073-14 14.5 NATURAL 05-073-14B 14.5 BLACK 05-073-14DE 14.5 DK EARTH 05-073-15 15.5 NATURAL 05-073-15B 15.5 BLACK 05-073-15DE 15.5 DK EARTH NATURAL 12.5 DARK EARTH 12.5 GEN III AR15 + M16 FREE FLOAT FOREARM RIFLE LENGTH The forearm is constructed of light weight, high strength carbon fiber, aluminum, and high strength steel for the best possible combination of weight and strength. The carbon fiber also reduces the amount of heat transferred to the shooter during rapid fire or high volume. Forearm weight is 10 oz. 05-074-03 NATURAL 05-074-03B BLACK 05-074-03DE DARK EARTH AR 15 + M16 ACCESSORIES 32 33

GEN III DELTA FOREARMS This free-float carbon fiber forearm is in the triangular shape, (Delta) configuration and was designed to work with most of the op-rod systems out in the market today including gas systems. The Delta forearm uses the same, easy-to-use locking configuration as the PRI original round forearms. They come in Black or Dark Earth and three different lengths - Intermediate, Rifle & Carbine. All come with 4 rails: a top rail 8.5 on the Rifle, 5.5 on the Intermediate, 3 on the Carbine, and the remaining rails are 3. The Rifle length forearm is 12.5 ; Intermediate is 9 ; Carbine is 7. The weight of the Rifle length is 15oz., Intermediate-13oz., Carbine-13.2oz all with barrel nut. EXTENDED 14 & 15 SIZE OPTIONS AVAILABLE. +TOP RAIL OF FOREARM IS NOT SAME ELEVATION AS THE RECEIVER. 05-071-01B PRI DELTA FOREARM RIFLE LENGTH BLACK 05-071-01DE PRI DELTA FOREARM RIFLE LENGTH DARK EARTH 05-071-02B PRI DELTA FOREARM INTERMEDIATE LENGTH BLACK 05-071-02DE PRI DELTA FOREARM INTERMEDIATE LENGTH DARK EARTH 05-071-03B PRI DELTA FOREARM CARBINE LENGTH BLACK 05-071-03DE PRI DELTA FOREARM CARBINE LENGTH DARK EARTH 05-071-14B PRI DELTA FOREARM 14 LENGTH BLACK 05-071-14DE PRI DELTA FOREARM 14 LENGTH DARK EARTH 05-071-15B PRI DELTA FOREARM 15 LENGTH BLACK 05-071-15DE PRI DELTA FOREARM 15 LENGTH DARK EARTH GEN II FOREARMS Designed for the Original Mark 12 Mod 0. The Gen II Rifle length forearm is a combination of anodized hard coated aluminum and carbon fiber that creates the look of the original Mark 12 Mod 0 rifle. The forearm is 12 3/4 in length and has one 8.5 rail on the top with two stainless steel lugs used to secure the SPR top rail to the forearm. It also has three 3 rails at 3, 6 and 9 o clock positions. The forearm weighs 1.03 lbs. 05-073-G2N 05-073-G2B 05-073-G2DE NATURAL FINISH BLACK FINISH DARK EARTH FINISH GEN III AR15 + M16 FREE FLOAT TARGET FOREARM NATURAL FINISH NO RAILS OR HOLES Constructed of light weight, high strength carbon fiber, aluminum, and high strength steel for the best possible combination of weight and strength. The carbon fiber reduces the amount of heat transferred to the shooter during rapid fire or high volume. The forearms comes in rifle length 12.5 14 and 15. Forearms are available in black or dark earth. The Inner diameter of the barrel nut is 1.020 05-073-03T 05-073-03TB 05-073-03TDE 05-073-14T 05-073-14T-B 05-073-14T-DE 05-073-15T 05-073-15T-B 05-073-15T-DE 12.5 NATURAL 12.5 BLACK 12.5 DARK EARTH 14 NATURAL 14 BLACK 14 DARK EARTH 15 NATURAL 15 BLACK 15 DARK EARTH GEN III AR15 + M16 FREE FLOAT FOREARM NO RAILS The Gen III Carbon Fiber Free Float Forearm in natural finish. This forearm has all the holes that the full railed version does. This allows the shooter to add rails latter or just get the rails they want. The forearm collar, barrel nut, forearm sleeve, and the end cap are constructed of hard coated black oxidized aluminum. The forearm is woven carbon fiber which is lightweight high strength and disperses the heat better then aluminum. The ID of the tube is 1.75 and the OD is 2. The weight including barrel nut is 11.5 ounces. 05-073-03TH 05-073-03TH-B 05-073-03TH-DE 05-073-14TH 05-073-14TH-B 05-073-14TH-DE 05-073-15TH 05-073-15TH-B 05-073-15TH-DE 12.5 NATURAL 12.5 BLACK 12.5 DARK EARTH 14 NATURAL 14 BLACK 14 DARK EARTH 15 NATURAL 15 BLACK 15 DARK EARTH + ALL AR15 ROUND TUBES ARE 1.75 INNER DIMENSION + 2.00 OUTER DIMENSION AR 15 + M16 ACCESSORIES 34 35

GEN III AR15 + M16 FOREARM RAIL SYSTEM CARBINE LENGTH The forearm rail is constructed of light weight aluminum. The rail is designed to work with the PRI AR15 / M16 free float forearm. The 1913 rail ties the upper receiver to the forearm to make a rigid platform for mounting any sighting or lighting equipment required. 05-073-04 CARBINE LENGTH 05-073-05 INTERMEDIATE LENGTH GEN III AR15 + M16 FOREARM RAIL SYSTEM RIFLE LENGTH The forearm rail is constructed of light weight aluminum. The rail is designed to work with the PRI AR15 / M16 free float forearm. The 1913 rail ties the upper receiver to the forearm to make a rigid platform for mounting any sighting or lighting equipment required. 05-073-06 AR15 + M16 SPR FOREARM TOP RAILS This rifle length SPR top rail Straight and with PEQ 2 rail section is a full Picatinny rail that connects the receiver to the forearm rail. The top rail connects to the forearm rail using the 2 SS lugs. This creates a rigid platform ideal for mounting scopes and night vision. Rail is constructed of 6061 hard coat black anodized aluminum with groove increments engraved into rail for best repeatability. The overall length of rail is 17.7. 05-SPR-01 05-SPR-PEQ SPR STRAIGHT TOP RAIL SPR TOP RAIL WITH PEQ RAIL SECTION 8.5 FREE FLOAT FOREARM RAIL The 8.5 aluminum rails are auxiliary rails for PRI s forearms. The rails can be installed in any position. The 8.5 rail has stainless steel lugs so the ARMS #38 sleeve can be attached to the PRI forearms. 05-070-03 8.5 FREE FLOAT FOREARM RAIL The 8.5 aluminum rail is an auxiliary rail for PRI s forearms. The rails can be installed in any position. 05-070-02 BLACK 05-070-02DE DARK EARTH 5.5 FREE FLOAT FOREARM TOP RAIL INTERMEDIATE The 5.5 aluminum rail is an auxiliary rail for PRI s forearms. The rails can be installed in any position. 05-070-05 BLACK 05-070-05DE DARK EARTH 3 FREE FLOAT FOREARM RAILS The 3 aluminum rails are auxiliary rails for PRI s forearms. The rails can be installed in any position. 05-070-01 BLACK 05-070-01DE DARK EARTH + ALL FOREARM RAILS COME WITH MOUNTING HARDWARE AR 15 + M16 ACCESSORIES 36 37

4 FREE FLOAT FOREARM RAIL w/ SLING SWIVEL + STUD The 4 aluminum rail is an auxiliary rail for PRI s forearms. The swivel has a push button release system and the stud is threaded into the rail. 05-070-07 RAIL SWIVEL AND STUD 05-070-071 SLING SWIVEL 05-070-072 SWIVEL STUD AR15 DELTA FOREARM SPR TOP RAILS These rails provide a straight Picatinny rail to the end of each forearm size. Rails are constructed of hard coat black anodized aluminum with increments marks on the grooves. Rails come with all the screws needed to mount rail to forearms and receivers. These rails are designed to connect directly to the forearm. Top rail will need to be removed. 05-071-SPR RIFLE 05-071-02 INTERMEDIATE CARBINE 05-071-03 CARBINE AR15 + M16 PRI FLAT-TOP RISERS This mount was originally designed to set on the M4 flat-top receiver, but it has also proven to be a versatile base for many different purposes. This aluminum mount with full Picitanny rail will extend the mounting platform area to the front or rear to accommodate the many new optics sights and night vision equipment. The mount facilitates the piggybacking of systems such as a red dot sight and a night vision pocket scope for daytime removal without loss of zero. This mount comes in 4 different versions: A two hole mount that extends almost 3 where the three hole mount extends 1.5. There is another 2 hole mount that extends 2.5 and is shorter overall. Then the PRI s single throw lever riser extends 1.75. The elevation for this mount is.450. 05-0062 2 HOLE RISER 05-0064 3 HOLE RISER 05-0066 SINGLE THROW LEVER 05-0062S 2 HOLE RISER SHORT 05-0062B 2 HOLE RISER 20 M.O.A 1.375 05-0062 6.375 6.25 7 05-0064 3 AR 15 + M16 ACCESSORIES 05-0066 RECCE RAIL The Recce rail system is the best of both worlds. This rail ties the receiver to the PRI carbon fiber forearm, but doesn t extend the full length of the forearm. This reduces the weight and allows the shooter more variation or adjustment in locating their optics on the gun. This light weight rail is constructed of high strength aluminum. The overall length of the rail is 11.5. This rail is also made to allow most flip up rear sights to sit behind it on the receiver. To install this mount requires PRI rifle length forearm and top rail with lugs. 05-0062S 5.5 2.5 38 05-065 39

40 GEN III AR15 14 +15 FOREARM TOP RAIL This rail is designed for the 15 forearms in AR15 Round and Delta configurations. The forearm is hard-coat black anodized aluminum that will tie the upper receiver and the 14 & 15 forearms together. 05-SPR-R15 05-071-D15 05-SPR-R14 05-SPR-R15 05-071-D14 05-071-D15 GATOR GRIP PLATFORM RAIL w/ 20 MOA BASE The base is constructed of a combination of hard coated black anodized aluminum and steel for the clamping pads and lever. This works as a riser for any optic that you want to rail up for added elevation and forward eye relief. The elevation of the riser from the top of the rifle s rail and the top of the riser is.865. The Gator grip has a single throw lever that activates two locating spring-loaded clamp pads that provide great repeatability and hold to. 05-068-B AR15 W/ ROUND FOREARMS AR15 W/ 15 DELTA FOREARMS SPR 14 STRAIGHT TOP RAIL ROUND SPR 15 STRAIGHT TOP RAIL ROUND SPR 14 STRAIGHT TOP RAIL DELTA SPR 15 STRAIGHT TOP RAIL DELTA GEN III AR15 RIFLE LENGTH FOREARM TOP RAIL This rifle length SPR straight top rail is a full Picatinny rail that connects the receiver to the forearm. This top requires the 8.5 rail with lugs in order to connect top rail to forearm. This creates a rigid platform ideal for mounting accessories. 05-PEQ-G2 - PEQ FULL TOP RAIL 05-SPR-G2 - STRAIGHT TOP RAIL GATOR GRIP RAIL RISER This new rail riser with double locking pressure and a single release point makes for a fast- on-fast-off platform. This riser is 6 ¼ in length and is constructed of hard coated black anodized aluminum and high strength steel. The riser gives you a little more then ¾ elevation from the receiver. The top rail is a full 1913 rail. 05-067 5.56mm AR15 + M16 MAGAZINES 5, 10, 15 & 30 round capacity magazines for the 5.56 AR15 / M16 family of weapons. The magazines have steel- welded construction with custom Magpul guided followers and spring & push button floor plates. 05-556-05 5.56 5 ROUND CAPACITY 05-556-10 5.56 10 ROUND CAPACITY 05-556-15 5.56 15 ROUND CAPACITY 05-556-30 5.56 30 ROUND CAPACITY REPLACEMENT 5.56 FOLLOWERS Replacement 5.56 followers for PRI magazines and other steel or aluminum mags. The 5 round conversion follower is designed to convert PRI 10 round steel magazines to a 5 round capacity magazine. PRI is not responsible for operators using this follower to convert other magazines to 5 round capacity. 05-556-RF5 5/10 ROUND 15 ROUND 30 ROUND AR 15 + M16 ACCESSORIES 41

RAILS + FOREARMS CHARGING HANDLES SIGHTS + BRAKES GAS BLOCKS + MAGS ACCESSORIES.308 + 6.8

GEN III.308 TARGET FOREARM NO HOLES OR RAILS This forearm is constructed of lightweight, high strength carbon fiber, aluminum and steel for the best combination of weight and strength. This forearm comes with NO Holes or Rails. Forearm weights 13oz with the barrel nut. Forearm length is 12 5/8. Fits Armalite, DPMS, and KAC. +308 TUBES ARE 1.9 I.D. 2.2 O.D. 03-072-03T 03-072-03TB 03-072-03TDE 03-072-314T 03-072-314TB 03-072-314TDE 03-072-315T 03-072-315TB 03-072-315TDE 03-072-14T 03-072-14TB 03-072-14TDE 03-072-1414T 03-072-1414TB 03-072-1414TDE 03-072-1415T 03-072-1415TB 03-072-1415TDE NATURAL BLACK DARK EARTH GEN III.308 FREE FLOAT FOREARM RIFLE LENGTH The forearm is constructed of light weight, high strength carbon fiber, aluminum, and high strength steel for the best possible combination of weight and strength. The carbon fiber also reduces the amount of heat transferred to the shooter during rapid fire or high volume. Forearm weight is 18 oz. +FITS DPMS/KAC, & ARMALITE 03-072-03 12.75 ARMALITE NATURAL 03-072-03B 12.75 ARMALITE BLACK 03-072-03DE 12.75 ARMALITE DARK EARTH 03-072-14 12.75 DPMS/KAC NATURAL 03-072-14B 12.75 DPMS/KAC BLACK 03-072-14DE 12.75 DPMS/KAC DRK EARTH RIFLE LENGTH ARMALITE NATURAL RIFLE LENGTH ARMALITE BLACK RIFLE LENGTH ARMALITE DARK EARTH 14 ARMALITE NATURAL 14 ARMALITE BLACK 14 ARMALITE DARK EARTH 15 ARMALITE NATURAL 15 ARMALITE BLACK 15 ARMALITE DARK EARTH 14 DPMS NATURAL 14 DPMS BLACK 14 DPMS DARK EARTH 14 DPMS NATURAL 14 DPMS BLACK 15 DPMS DARK EARTH 15 DPMS NATURAL 15 DPMS BLACK 15 DPMS NATURAL GEN III.308 FREE FLOAT FOREARM CARBINE LENGTH This forearm is constructed of light weight, high strength carbon fiber, aluminum, and high strength steel for the best possible combination of weight and strength. Stronger and lighter weight than the solid aluminum forearms. The carbon fiber also reduces the amount of heat transferred to the shooter during rapid fire or high volume. Forearm weight is 16 oz. +FITS DPMS/KAC, & ARMALITE 03-072-01 9.75 ARMALITE NATURAL 03-072-01B 9.75 ARMALITE BLACK 03-072-01DE 9.75 ARMALITE DARK EARTH 03-072-12 9.75 DPMS/KAC NATURAL 03-072-12B 9.75 DPMS/KAC BLACK 03-072-12DE 9.75 DPMS/KAC DARK EARTH GEN III.308 FREE FLOAT FOREARM EXTENDED LENGTHS The forearm is constructed of light weight, high strength carbon fiber, aluminum, and high strength steel for the best possible combination of weight and strength. The carbon fiber also reduces the amount of heat transferred to the shooter during rapid fire or high volume. Forearm weight is 18 oz. +FITS DPMS/KAC, & ARMALITE 03-072-314 14 ARMALITE NATURAL 03-072-314B 14 ARMALITE BLACK 03-072-314DE 14 ARMALITE DARK EARTH 03-072-315 15 ARMALITE NATURAL 03-072-315B 15 ARMALITE BLACK 03-072-315DE 15 ARMALITE DARK EARTH 03-072-1414 14 DPMS/KAC NATURAL 03-072-1414B 14 DPMS/KAC BLACK 03-072-1414DE 14 DPMS/KAC DARK EARTH 03-072-1415 15 DPMS/KAC NATURAL 03-072-1415B 15 DPMS/KAC BLACK 03-072-1415DE 15 DPMS/KAC DARK EARTH + ALL.308 ROUND TUBES ARE 1.9 INNER DIMENSION + 2.02 OUTER DIMENSION.308 ACCESSORIES 44 45

GEN III.308 EXTENDED FREE FLOAT CARBON FIBER FOREARMS NO RAILS PRI Gen III.308 Free Float Forearm constructed of light weight, high strength carbon fiber, aluminum, and high strength steel for the best possible combination of weight and strength. The carbon fiber reduces the amount of heat transferred to the shooter during rapid fire or high volume. This forearm has holes but no rails. The forearms comes in rifle length 12.75 14.75 and 15.75. Forearms are available in Black and Dark Earth. The inner diameter of the barrel nut is 1.020 Custom barrel nuts with larger ID for larger diameter barrels can be made. The ID of the tube is 1.9. OD is 2.165 03-072-03TH RIFLE LENGTH ARMALITE NATURAL 03-072-03THB RIFLE LENGTH ARMALITE BLACK 03-072-03THDE RIFLE LENGTH ARMALITE DARK EARTH 03-072-314TH 14 LENGTH ARMALITE NATURAL 03-072-314THB 14 LENGTH ARMALITE BLACK 03-072-314THDE 14 LENGTH ARMALITE DARK EARTH 03-072-315TH 15 LENGTH ARMALITE NATURAL 03-072-315THB 15 LENGTH ARMALITE BLACK 03-072-315THDE 15 LENGTH ARMALITE DARK EARTH 03-072-14TH 14 LENGTH DPMS NATURAL 03-072-14THB 14 LENGTH DPMS BLACK 03-072-14THDE 14 LENGTH DPMS DARK EARTH 03-072-1414TH 14 LENGTH DPMS NATURAL 03-072-1414THB 14 LENGTH DPMS BLACK 03-072-1414THDE RIFLE LENGTH DPMS DARK EARTH 03-072-1415TH RIFLE LENGTH DPMS NATURAL 03-072-1415THB RIFLE LENGTH DPMS BLACK 03-072-1415THDE RIFLE LENGTH DPMS NATURAL.308 REPLACEMENT BARREL NUTS Replacement barrel nuts for PRI s.308 model forearms. Constructed of steel with a nitrite black finish. 03-072-RBNA 03-072-RBND ARMALITE DPMS.308 REPLACEMENT FOREARM COLLARS Replacement collar for PRI s.308 carbon fiber handguards. 03-072-RFC PRI GEN III.308 DELTA FOREARMS The forearms are constructed of lightweight high strength carbon fiber, aluminum and steel for the best possible combination of weight and strength. The carbon fiber also reduces the amount of heat transferred to the shooter during high rate of fire. The rail on top of the Delta is 1.328 from bore center to top of the rail. The forearms come with three 3 rails and a 8.5 rail on top. 03-071-01B RIFLE LENGTH ARMALITE BLACK 03-071-01DE RIFLE LENGTH ARMALITE DARK EARTH 03-071-314B 14 LENGTH ARMALITE BLACK 03-071-314DE 14 LENGTH ARMALITE DARK EARTH 03-071-315B 15 LENGTH ARMALITE BLACK 03-071-315DE 15 LENGTH ARMALITE DARK EARTH 03-071-14B RIFLE LENGTH DPMS BLACK 03-071-14DE RIFLE LENGTH DPMS DARK EARTH 03-071-1414B 14 LENGTH DPMS BLACK 03-071-1414DE 14 LENGTH DPMS DARK EARTH 03-071-1415B 15 LENGTH DPMS BLACK 03-071-1415DE 15 LENGTH DPMS DARK EARTH ARMALITE 875 ADJUSTABLE GAS BLOCK Armalite heavy barrel 875 adjustable gas block. Available in high strength steel with a Nitrite finish or stainless steel with a bead blast finish. The length of the gas block is 1.0 overall height is 1.7 and distance between centerline of bore and gas tube is.860. There are 2 set screws that hold the gas block in place are.5 apart and.25 from the rear of the gas block to the 1st screw. Gas blocks come with a rifle length straight gas tube and role pin. 03-875-02GT 03-875-03GT STEEL STAINLESS.308 ACCESSORIES 46 47

ARMALITE PICATINNY RAILED GAS BLOCK This barrel mounted gas block has a 2 ½ top rail that has the same plane as the Armalite.308 receiver. The rail is constructed of lightweight hard coat Black anodized aluminum. This gas block weight 2.5oz. Gas block fits over a.750 or.875 diameter barrel. Block locks into place with 2 crossbolts the same as our original gas block front sight. The rail height from barrel center line is 1.328 inches. 03-750-04.750 DIAMETER 03-875-04.875 DIAMETER SASS + DPMS LOW PROFILE GAS BLOCK This gas block is designed for the SASS.308 rifle or DPMS. The gas block reduces the size and the weight of the original SASS gas block. 03-SASS-01 GEN III.308 FREE FLOAT FOREARM RAIL SYSTEM RIFLE LENGTH This forearm rail is constructed of light weight aluminum. The rail is designed to work with the PRI AR10 free float forearm. The 1913 rail ties the upper receiver to the forearm to make a rigid platform for mounting any sighting or lighting equipment required. System comes with short section of rail to place in front of top rail to allow a rail mounted flip up front sight to be installed. 03-072-08 ARMALITE.308 DELTA SPR FULL TOP RAIL This rail ties the upper receiver to the Delta forearm to create a very rigid shooting platform. This rail will also give you the SPR look in a.308 package. Rail is constructed of hard coat black anodized aluminum and is 19 in length. This rail will work with Armalite and KAC uppers. This SPR rail connects directly to the Delta forearm. 03-071-SPR-A 03-071-SPR-D 03-071-SPR-14A 03-071-SPR-14D 03-071-SPR-15A 03-071-SPR-15D 2.308 FLAT-TOP RISERS ARMALITE RIFLE LENGTH DPMS RIFLE LENGTH 14 ARMALITE 14 DPMS 15 ARMALITE 15 DPMS This mount was designed to set on the variety of.308 flat-top receiver, but it has proved to be a versatile base for many different purposes. This aluminum mount with full Picitanny rail will extend the mounting platform area to the front or rear to accommodate the many new optics sights and night vision equipment. The mount facilitates the piggybacking of systems such as a red dot sight and a night vision pocket scope for daytime removal without loss of zero. Elevation.450. 03-072-09.308 FLAT-TOP RISER 03-072-10B.308 FLAT-TOP RISER W/ 20 MOA 03-072-10D.308 FLAT-TOP RISER W/ 30 MOA 9.308 ACCESSORIES.308 SPR TOP RAIL FULL VERSION This rail ties the upper receiver to the forearm to create a very rigid shooting platform. This rail will also give you the SPR look in a.308 package. Rail is constructed of hard coat black anodized aluminum and is 19 in length. This rail will work with Armalite and KAC uppers. This SPR rail connects directly to the forearm. 03-072-SPR-A 03-072-SPR-D ARMALITE RIFLE LENGTH DPMS RIFLE LENGTH GEN III DPMS & ARMALITE.308 14+ 15 FOREARM TOP RAILS These rails are designed for the DPMS and Armalite.308 Round and 14 & 15 forearm to bridge the receiver to the forearm. 03-072-SPR-14A 03-072-SPR-14D 03-072-SPR-15A 03-072-SPR-15D 14 ARMALITE 14 DPMS 15 ARMALITE 15 DPMS 48 49

ROCK RIVER.308 GAS BUSTER CHARGING HANDLE The Rock River.308 Gas Buster charging handle is a safety device with ergonomic design that diverts harmful gases, oil and dirt away from the shooter. This handle comes with either the Big Latch or Combat Latch. 03-072-24 BIG LATCH 03-072-25 COMBAT LATCH DPMS GII.308 GAS BUSTER CHARGING HANDLES Gas Buster Charging handles for the new DPMS GII.308 rifle. 03-072-G5 MILITARY BIG LATCH 03-072-G7 COMBAT LATCH.308 DPMS + ARMALITE FLIP UP FRONT SIGHTS The PRI F.U.F.S. eliminates the shadow cast on the optical sights and the full circle hood increase the speed of target pick-up. The sight post lifts up and locks in the up position. The sight is constructed of hard coated anodized aluminum. Sight is now available in.750, and.875 diameter barrels. Sight has an integral gas system. DPMS height from centerline of bore to top of the site post in the up position is 2.653 Armalite height from centerline of bore to top of the site post in the up position is 2.728 03-D025.750 DIAMETER DPMS 03-D026.875 DIAMETER DPMS 03-0025.750 DIAMETER ARMALITE 03-0023.875 DIAMETER ARMALITE M84 AR-10+SR25+DPMS GAS BUSTER CHARGING HANDLE BIG LATCH 03-072-05.308 QUIET CONTROL BRAKE The Gas Buster charging handle is a safety device with ergonomic design that diverts harmful gases, oil and dirt particles away from the shooter. The gas buster comes with a military big latch, combat or flat latch. +THIS IS A PRI PATENTED PRODUCT. SAFETY APPROVED. +FOR.308 CALIBER RIFLES COMBAT LATCH 03-072-07 The Quiet Control Brake/Compensator has a system of ports to reduce the recoil, the muzzle climb, and the noise heard by the shooter. The QCB is cut from solid stainless steel bar stock for greater resistance to heat and burnout. Specs: 304 stainless,.95 dia. x 2.05 long, Glass Bead finish, Thread is 5/8-24. Lead diameter is.750. Spacer shims included. 03-0090 NATURAL TAPER 03-0090B BLACK TAPER 03-0091 NATURAL STRAIGHT 03-0091B BLACK STRAIGHT SHIM WASHERS FLATCH LATCH 03-072-04 03-0091.75 03-0090 Shim washers for installing brakes. Washers are stainless steel and come in packs of 9. 2 of the.010, 2 of the.005, 3 of the.003, and 2 of the.002. We offer 2 different IDs for these washers. 5/8 or 1/2 inch IDs by.3/4 inch OD. 05-6893 5/8 X 3/4 INCH PACKS 05-6894 1/2 X 3/4 INCH PACKS.95 03-0090B 03-0091B.308 ACCESSORIES 50 51

52 6.8mm AR15 + M16 MAGAZINES 5, 10, 15 & 25 round capacity magazines for the 6.8mm SPC AR15 / M16 family of weapons. Magazines have steel welded construction with custom Magpul guided followers and spring & push button floor plates. 05-6808 5 ROUND 05-6807 10 ROUND 05-6806 15 ROUND 05-6805 25 ROUND MAGAZINE REPLACEMENT SPRINGS Chrome siilcone replacement springs that work for both 5.56 and 6.8mm magazines. 05-010-SS 05-015-SS 05-025-SS BRAKE THREAD ADAPTER 5 / 10 ROUND MAGAZINES 15 ROUND MAGAZINES 25 ROUND MAGAZINES REPLACEMENT 6.8 SPC FOLLOWERS For PRI steel magazines or other steel/aluminum magazines. The standard 6.8 SPC Magpul follower designed for PRI s magazines designed to convert PRI 10 round steel magazines to a 5 round capacity. Not responsible for operators using this follower to convert other magazines to 5 round capacity. 05-6810-05 6.8 SPC CALIBER BOLTS These 6.8 SPC bolts are constructed of carpenter steel 158 and are finished with a magnesium phosphate. The bolt is held to strict Military specifications for a drop in fit. The bolt has 3 split type gas rings. 05-68-BO Thread adapters are constructed of stee and converts a 1/2-32 thread to a 5/8-24 thread. +ALWAYS CONFIRM THE BARREL AND THE BREAK ARE DESIGNED FOR THE SAME CALIBER. 05-6890 5/8-24 X ½-32 05-6891 5/8-24 X ½-36 05-6892 5/8-24 X ½-28 6.8mm REM SPC AR15 + M16 BARREL The 6.8mm barrels are constructed of 416 stainless steel with a 1:10 twist. Barrel has a bead-blasted or black finish. 5/8 x 24 threaded end for brake or compensator installation. Fitted bolt comes with the barrel. Our 6.8 barrels can be chambered to Spec or Spec 2 standard. 16.5 BARREL LENGTH 05-068-16D DOUGLAS 6.8 STAINLESS STEEL BEAD-BLAST FINISH 05-068-16DB DOUGLAS 6.8 STAINLESS STEEL BLACK FINISH 18.5 BARREL LENGTH 05-068-18D DOUGLAS 6.8 STAINLESS STEEL BEAD-BLAST FINISH 05-068-18DB DOUGLAS 6.8 STAINLESS STEEL BLACK FINISH QC BRAKE FOR 6.8mm The Quiet Control Brake/Compensator has a system of ports to reduce the recoil, the muzzle climb, and the noise heard by the shooter. The QCB is cut from solid stainless steel bar stock for greater resistance to heat and burnout. Specs: 304 stainless,.95 dia.x 2.05 long, glass bead finish, Thread is ½ -28. Lead diameter is.750. Shim pack included. 05-0088 NATURAL TAPER 05-0088B BLACK TAPER 05-0093 NATURAL STRAIGHT 05-0093B BLACK STRAIGHT 05-0094 NATURAL CROWN 05-0094B BLACK CROWN QC BRAKE FOR 6.5mm The 6.5 Quiet Control Brake / Compensator has a system of ports to reduce the recoil and climb of the muzzle. It has been cut from solid stainless steel block for greater resistance to heat and burnout. Specs: 304 Stainless.95 dia. X 2.05 long glass beaded finish. The thread is 5/8-24. Includes selection of spacer shims to set the timing of the brake. 05-0098 NATURAL TAPER 05-0098B BLACK TAPER 05-0099 NATURAL STRAIGHT 05-0099B BLACK STRAIGHT 05-0097 NATURAL CROWN 05-0097B BLACK CROWN 05-0093.75 05-0088 05-0094 05-0088B 05-0094B.95 05-0093B 6.8 ACCESSORIES 53

MARK 12 MOD O SPR TACTICAL OPERATOR UPPERS RIFLES + 3 GUN SHOOTER + GEN II

MARK 12 MOD 0 SPR VARIANT RIFLE MARK 12 MOD 0 SPR RIFLE 07-556VARR16-RDN 5.56 /.223 RIFLE; 16 DOUGLAS BARREL; 1:8 TWIST 07-55618SPR-RDB 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1:8 TWIST 07-68VARR16-RDN 6.8 RIFLE; 16 DOUGLAS BARREL; 1:10 TWIST 07-6818SPR-RDB 6.8 RIFLE; 18 DOUGLAS BARREL; 1:8 TWIST 07-556VARR16-RBN 5.56 /.223 RIFLE; 16 BERGARA BARREL; 1:8 TWIST 07-55618SPR-RDB7 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1-7 TWIST + QUALIFIED FFL DEALER REQUIRED FOR PURCHASE + QUALIFIED FFL DEALER REQUIRED FOR PURCHASE UPPER RECEIVER Forged T6 7075 UPPER RECEIVER Forged T6 7075 LOWER RECEIVER Forged T6 7075 LOWER RECEIVER Forged T6 7075 BARRELS 16 5.56/.223 Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist BARRELS 18 5.56/.223 Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist 16 6.8mm Douglas 416 Stainless Steel, M4 feed ramps, 1:10 Twist 18 6.8mm Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist 16 5.56/.223 Bergara 416 Stainless Steel, M4 Feed Ramps, 1:8 Twist 18 5.56/.223 Douglas 416 Stainless Steel, M4 feed ramps, 1:7 Twist GAS BLOCK Low Profile Steel Block, Nitrite Finish, Secured w/ 2 Set Screws GAS BLOCK PRI Gas Block Flip Up Front Sight TRIGGER Standard Trigger TRIGGER Standard Trigger FOREARM Natural Finish FOREARM Rifle Length Black Finish PISTOL GRIP A2 Pistol Grip PISTOL GRIP A2 Pistol Grip BUTTSTOCK 6 Position B5 Bravo Stock BUTTSTOCK 6 Position Bravo B5 Stock BUIS PRI Flip Up Front And Rear Sights BUIS PRI Flip Up Rear Sights TOP RAIL Intermediate Length Top Rail TOP RAIL Full Length SPR Top Rail MUZZLE DEVICE ½ x 28 (5.56) 5/8 x 24 (6.8) Threaded QC Straight Brake Black MUZZLE DEVICE ½ x 28 (5.56) 5/8 x 24 (6.8) Threaded AE Brake and Collar WEIGHT / LENGTH 7.9 Pounds / 34 with Stock WEIGHT / LENGTH 8.68 Pounds / 34 with Stock ACCURACY 5.56 Douglas sub MOA / 6.8 Douglas MOA / Bergara MOA + ACCURACY 5.56 Douglas sub MOA / 6.8 Douglas MOA INCLUDED Gas Buster Charging Handle with Military Latch INCLUDED Gas Buster Charging Handle with Military Latch RIFLES + UPPERS MARK 12 MOD 0 SPR VARIANT UPPER 07-556VARU16-DB 5.56 /.223 UPPER; 16 DOUGLAS BARREL; 1:8 TWIST 07-68VARU16-DB 6.8 UPPER; 16 DOUGLAS BARREL; 1:10 TWIST 07-556VARU16-BB 5.56 /.223 UPPER; 16 BERGARA BARREL; 1:8 TWIST MARK 12 MOD 0 SPR UPPER 07-55618-SPR-RDB 5.56 /.223 UPPER; 18 DOUGLAS BARREL; 1:8 TWIST 07-6818-SPR-RDB 6.8 UPPER; 18 DOUGLAS BARREL; 1:10 TWIST 56 57

MARK 12 MOD 0 DELTA PRI DELUXE RIFLE 07-55618SPR-DDB-17 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1:7 TWIST 07-556DUR16-RDN 5.56 /.223 RIFLE; 16 DOUGLAS BARREL; 1:8 TWIST 07-6818SPR-DDB 6.8 RIFLE; 16 DOUGLAS BARREL; 1:10 TWIST 07-68DUR16-RDN 6.8 RIFLE; 16 DOUGLAS BARREL; 1:10 TWIST 07-55618SPR-DDB7-18 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1:8 TWIST 07-556DUR16-RBN 5.56 /.223 RIFLE; 16 BERGARA BARREL; 1:8 TWIST + QUALIFIED FFL DEALER REQUIRED FOR PURCHASE + QUALIFIED FFL DEALER REQUIRED FOR PURCHASE UPPER RECEIVER Forged T6 7075 UPPER RECEIVER Forged T6 7075 LOWER RECEIVER Forged T6 7075 LOWER RECEIVER Forged T6 7075 BARRELS 18 5.56/.223 Douglas 416 Stainless Steel, M4 feed ramps, 1:7 Twist BARRELS 16 5.56/.223 Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist 18 6.8mm Douglas 416 Stainless Steel, M4 feed ramps, 1:10 Twist 16 6.8mm Douglas 416 Stainless Steel, M4 feed ramps, 1:10 Twist 18 5.56/.223 Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist 16 5.56/.223 Bergara 416 Stainless Steel, M4 Feed Ramps, 1:8 Twist GAS BLOCK PRI Gas Block Flip Up Front Sight GAS BLOCK PRI Gas Block Flip Up Front Sight TRIGGER Standard Trigger TRIGGER Standard Trigger FOREARM Rifle Length Delta With Black Finish FOREARM Intermediate Round with Natural Finish PISTOL GRIP A2 Pistol Grip PISTOL GRIP A2 Pistol Grip BUTTSTOCK 6 Position Bravo B5 Stock BUTTSTOCK 6 Position Carbine Stock With Recoil Pad BUIS PRI Flip Up Rear Sights BUIS PRI Flip-Up Rear Sights TOP RAIL Full Length SPR Delta Top Rail TOP RAIL NONE MUZZLE DEVICE ½ x 28 (5.56) 5/8 x 24 (6.8) Threaded AE Brake and Collar MUZZLE DEVICE ½ x 28 (5.56) 5/8 x 24 (6.8) Threaded QC Straight Brake Black WEIGHT / LENGTH 7.9 Pounds / 34 with Stock WEIGHT / LENGTH 7.9 Pounds / 34 with Stock ACCURACY 5.56 Douglas sub MOA / 6.8 Douglas MOA ACCURACY 5.56 Douglas sub MOA / 6.8 Douglas MOA / Bergara MOA + INCLUDED Gas Buster Charging Handle with Military Latch INCLUDED Gas Buster Charging Handle with Military Latch RIFLES + UPPERS MARK 12 MOD 0 DELTA UPPER 07-55618-SPR-DDB 5.56 /.223 UPPER; 16 DOUGLAS BARREL; 1:8 TWIST 07-6818-SPR-DDB 6.8 UPPER; 16 DOUGLAS BARREL; 1:10 TWIST 07-556-SPR-DDB7 5.56 /.223 UPPER; 16 DOUGLAS BARREL; 1:7 TWIST PRI DELUXE UPPER 07-556DU16-RDN 07-68DU16-RDN 07-556DU16-RBN 5.56 /.223 UPPER; 16 DOUGLAS BARREL; 1:8 TWIST 6.8 UPPER; 16 DOUGLAS BARREL; 1:10 TWIST 5.56 /.223 UPPER; 16 BERGARA BARREL; 1:8 TWIST 58 59

PRI ENTRY LEVEL RIFLE ROUND NATURAL 07-556ELR16-RDN 5.56 /.223 RIFLE; 16 DOUGLAS BARREL; 1:8 TWIST 07-68ELR16-RDN 6.8 RIFLE; 16 DOUGLAS BARREL; 1:10 TWIST 07-556ELR16-RBN 5.56 /.223 RIFLE; 16 BERGARA BARREL; 1:8 TWIST + QUALIFIED FFL DEALER REQUIRED FOR PURCHASE UPPER RECEIVER Forged T6 7075 LOWER RECEIVER Forged T6 7075 BARRELS 16 5.56/.223 Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist 16 6.8mm Douglas 416 Stainless Steel, M4 feed ramps, 1:10 Twist 16 5.56/.223 Bergara 416 Stainless Steel, M4 Feed Ramps, 1:8 Twist GAS BLOCK Low Profile Steel Block, Nitrite Finish, Secured w/ 2 Set Screws TRIGGER Standard Trigger FOREARM Rifle Length Round With Natural Finish PISTOL GRIP A2 Pistol Grip BUTTSTOCK 6 Position B5 Bravo Stock BUIS NONE TOP RAIL NONE MUZZLE DEVICE ½ x 28 (5.56) 5/8 x 24 (6.8) Threaded QC Straight Brake Black WEIGHT / LENGTH 7.9 Pounds / 34 with Stock ACCURACY 5.56 Douglas sub MOA / 6.8 Douglas MOA / Bergara MOA + INCLUDED Gas Buster Charging Handle with Military Latch PRI ENTRY LEVEL RIFLE ROUND DARK EARTH 07-556ELR16-RDD 5.56 /.223 RIFLE; 16 DOUGLAS BARREL; 1:8 TWIST 07-68ELR16-RDD 6.8 RIFLE; 16 DOUGLAS BARREL; 1:10 TWIST 07-556ELR16-RBD 5.56 /.223 RIFLE; 16 BERGARA BARREL; 1:8 TWIST + QUALIFIED FFL DEALER REQUIRED FOR PURCHASE UPPER RECEIVER Forged T6 7075 LOWER RECEIVER Forged T6 7075 BARRELS 16 5.56/.223 Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist 16 6.8mm Douglas 416 Stainless Steel, M4 feed ramps, 1:10 Twist 16 5.56/.223 Bergara 416 Stainless Steel, M4 Feed Ramps, 1:8 Twist GAS BLOCK Low Profile Steel Block, Nitrite Finish, Secured w/ 2 Set Screws TRIGGER Standard Trigger FOREARM Rifle Length Rifle with Dark Earth Finish PISTOL GRIP A2 Pistol Grip BUTTSTOCK 6 Position B5 Bravo Stock BUIS NONE TOP RAIL NONE MUZZLE DEVICE ½ x 28 (5.56) 5/8 x 24 (6.8) Threaded QC Straight Brake Black WEIGHT / LENGTH 7.7 Pounds / 34 with Stock ACCURACY 5.56 Douglas sub MOA / 6.8 Douglas MOA / Bergara MOA + INCLUDED Gas Buster Charging Handle with Military Latch RIFLES + UPPERS PRI ENTRY LEVEL ROUND UPPER NATURAL 07-556ELU16-RDN 5.56 /.223 UPPER; 16 DOUGLAS BARREL; 1:8 TWIST 07-68ELU16-RDN 6.8 UPPER; 16 DOUGLAS BARREL; 1:10 TWIST 07-556ELU16-RBN 5.56 /.223 UPPER; 16 BERGARA BARREL; 1:8 TWIST PRI ENTRY LEVEL ROUND UPPER DARK EARTH 07-556ELU16-RDD 5.56 /.223 UPPER; 16 DOUGLAS BARREL; 1:8 TWIST 07-68ELU16-RDD 6.8 UPPER; 16 DOUGLAS BARREL; 1:10 TWIST 07-556ELU16-RBD 5.56 /.223 UPPER; 16 BERGARA BARREL; 1:8 TWIST 60 61

PRI ENTRY LEVEL RIFLE ROUND BLACK 07-556ELR16-RDB 5.56 /.223 RIFLE; 16 DOUGLAS BARREL; 1:8 TWIST 07-68ELR16-RDB 6.8 RIFLE; 16 DOUGLAS BARREL; 1:10 TWIST 07-556ELR16-RBB 5.56 /.223 RIFLE; 16 BERGARA BARREL; 1:8 TWIST + QUALIFIED FFL DEALER REQUIRED FOR PURCHASE UPPER RECEIVER Forged T6 7075 LOWER RECEIVER Forged T6 7075 BARRELS 16 5.56/.223 Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist 16 6.8mm Douglas 416 Stainless Steel, M4 feed ramps, 1:10 Twist 16 5.56/.223 Bergara 416 Stainless Steel, M4 Feed Ramps, 1:8 Twist GAS BLOCK Low Profile Steel Block, Nitrite Finish, Secured w/ 2 Set Screws TRIGGER Standard Trigger FOREARM Rifle Length Round with Black Finish PISTOL GRIP A2 Pistol Grip BUTTSTOCK 6 Position B5 Bravo Stock BUIS NONE TOP RAIL NONE MUZZLE DEVICE ½ x 28 (5.56) 5/8 x 24 (6.8) Threaded QC Straight Brake Black WEIGHT / LENGTH 7.3 Pounds / 34 with Stock ACCURACY 5.56 Douglas sub MOA / 6.8 Douglas MOA / Bergara MOA + INCLUDED Gas Buster Charging Handle with Military Latch PRI ENTRY LEVEL RIFLE DELTA DARK EARTH 07-556ELR16-RDD 5.56 /.223 RIFLE; 16 DOUGLAS BARREL; 1:8 TWIST 07-68ELR16-RDD 6.8 RIFLE; 16 DOUGLAS BARREL; 1:10 TWIST 07-556ELR16-DBD 5.56 /.223 RIFLE; 16 BERGARA BARREL; 1:8 TWIST + QUALIFIED FFL DEALER REQUIRED FOR PURCHASE UPPER RECEIVER Forged T6 7075 LOWER RECEIVER Forged T6 7075 BARRELS 16 5.56/.223 Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist 16 6.8mm Douglas 416 Stainless Steel, M4 feed ramps, 1:10 Twist 16 5.56/.223 Bergara 416 Stainless Steel, M4 Feed Ramps, 1:8 Twist GAS BLOCK Low Profile Steel Block, Nitrite Finish, Secured w/ 2 Set Screws TRIGGER Standard Trigger FOREARM Rifle Length Delta With Dark Earth Finish PISTOL GRIP A2 Pistol Grip BUTTSTOCK 6 Position B5 Bravo Stock BUIS NONE TOP RAIL NONE MUZZLE DEVICE ½ x 28 (5.56) 5/8 x 24 (6.8) Threaded QC Straight Brake Black WEIGHT / LENGTH 7.8 Pounds / 34 with Stock ACCURACY 5.56 Douglas sub MOA / 6.8 Douglas MOA / Bergara MOA + INCLUDED Gas Buster Charging Handle with Military Latch RIFLES + UPPERS PRI ENTRY LEVEL UPPER ROUND BLACK 07-556ELU16-RDB 5.56 /.223 UPPER; 16 DOUGLAS BARREL; 1:8 TWIST 07-68ELU16-RDB 6.8 UPPER; 16 DOUGLAS BARREL; 1:10 TWIST 07-556ELU16-RBB 5.56 /.223 UPPER; 16 BERGARA BARREL; 1:8 TWIST PRI ENTRY LEVEL DELTA UPPER DARK EARTH 07-556ELU16-DDD 5.56 /.223 UPPER; 16 DOUGLAS BARREL; 1:8 TWIST 07-68ELU16-DDD 6.8 UPPER; 16 DOUGLAS BARREL; 1:10 TWIST 07-556ELU16-DBD 5.56 /.223 UPPER; 16 BERGARA BARREL; 1:8 TWIST 62 63

PRI ENTRY LEVEL RIFLE DELTA BLACK 07-556ELR16-DDB 5.56 /.223 RIFLE; 16 DOUGLAS BARREL; 1:8 TWIST 07-68ELR16-DDB 6.8 RIFLE; 16 DOUGLAS BARREL; 1:10 TWIST 07-556ELR16-DBB 5.56 /.223 RIFLE; 16 BERGARA BARREL; 1:8 TWIST + QUALIFIED FFL DEALER REQUIRED FOR PURCHASE UPPER RECEIVER Forged T6 7075 LOWER RECEIVER Forged T6 7075 BARRELS 16 5.56/.223 Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist 16 6.8mm Douglas 416 Stainless Steel, M4 feed ramps, 1:10 Twist 16 5.56/.223 Bergara Stainless Steel, M4 Feed Ramps, 1:8 Twist GAS BLOCK Low Profile Steel Block, Nitrite Finish, Secured w/ 2 Set Screws TRIGGER Standard Trigger FOREARM Rifle Length Delta With Black Finish PISTOL GRIP A2 Pistol Grip BUTTSTOCK 6 Position B5 Bravo Stock BUIS NONE TOP RAIL NONE MUZZLE DEVICE ½ x 28 (5.56) 5/8 x 24 (6.8) Threaded QC Straight Brake Black WEIGHT / LENGTH 7.3 Pounds / 34 with Stock ACCURACY 5.56 Douglas sub MOA / 6.8 Douglas MOA / Bergara MOA + INCLUDED Gas Buster Charging Handle with Military Latch PRI 3 GUN SHOOTER RIFLE 07-5563GS-RDB 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1:8 TWIST 07-683GS-RDB 6.8 RIFLE; 18 DOUGLAS BARREL; 1:10 TWIST + QUALIFIED FFL DEALER REQUIRED FOR PURCHASE UPPER RECEIVER Forged T6 7075 LOWER RECEIVER Forged T6 7075 BARRELS 18 5.56/.223 Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist 18 6.8mm Douglas 416 Stainless Steel, M4 feed ramps, 1:10 Twist GAS BLOCK Low Profile Steel Block, Nitrite Finish, Secured w/ 2 Set Screws TRIGGER Standard Trigger FOREARM 15 Length Black Finish PISTOL GRIP A2 Pistol Grip BUTTSTOCK 6 Position B5 Bravo Stock BUIS NONE TOP RAIL No Top Rail - Only One 3 Rail At 6 o clock Position MUZZLE DEVICE 5.56 - ½ X 28 Threaded QC Taper Brake Black 6.8-5/8 X 24 Threaded QC Taper Brake Black WEIGHT / LENGTH 7.48 Pounds / 34 with Stock ACCURACY 5.56 Douglas sub MOA / 6.8 Douglas MOA INCLUDED Gas Buster Charging Handle with Military Latch RIFLES + UPPERS PRI ENTRY LEVEL DELTA BLACK UPPER 07-556ELU16-DDB 5.56 /.223 UPPER; 16 DOUGLAS BARREL; 1:8 TWIST 07-68ELU16-DDB 6.8 UPPER; 16 DOUGLAS BARREL; 1:10 TWIST 07-556ELU16-DBB 5.56 /.223 UPPER; 16 BERGARA BARREL; 1:8 TWIST PRI 3 GUN SHOOTER UPPER 07-556-3GS-DB 5.56 /.223 UPPER; 18 DOUGLAS BARREL; 1:8 TWIST 07-68-3GS-DB 6.8 UPPER; 18 DOUGLAS BARREL; 1:10 TWIST 64 65

MARK 12 MOD O RETRO GEN II PRI is re-introducing the Mark 12 Mod 0 rifle. It s back to its original design that was established and proven with the US Army Special Forces and Rangers in 1999 field trials. We have made a close reproduction of the original that can be purchased as a complete upper, rifle or as a build-your-own project. The upper comes with the standard Mark 12 Mod 0 components, Douglas416 stainless steel barrel with a 1-7 or 1-8 twist, fitted bolt and a nitrited carrier from Losock Custom Arms(Mil Spec), AE brake and collar and the Gas Buster charging handle with big latch. 07-556G2B-SPR-17 07-556G2B-SPR-18 UPPER RECEIVER LOWER RECEIVER BARRELS GAS BLOCK TRIGGER FOREARM PISTOL GRIP B5 BRAVO STOCK BUIS RAILS MUZZLE DEVICE WEIGHT / LENGTH ACCURACY BUFFER & TUBE INCLUDED 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1:7 TWIST 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1:8 TWIST + QUALIFIED FFL DEALER REQUIRED FOR PURCHASE + PLEASE ALLOW 5~10 DAYS FOR ASSEMBLY AND TESTING PRIOR TO SHIPPING Forged T6 7075 Hard Coat Anodized Aluminum Forged T6 7075 Hard Coat Anodized Aluminum 18 5.56/2.23 Douglas 416 Stainless Steel, M4 feed ramps, 1:7 Twist 18 5.56/2.23 Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist Flip Up Front Sight Gas Block With 2 Cross Bolts For Securing Standard Trigger Rifle Length with Black Finish A2 Pistol Grip Black Finish Mil Spec Adjustable Rear Sight provided that works with Gas Block Sight All Rails plus SPR PEQ II Full Length Top Rail ½ X 28 Threaded AE Brake and Collar 5.2 Pounds / 27 with Stock 5.56 Douglas sub MOA Mil spec 6 Position Gas Buster Charging Handle with Big Latch MARK 12 MOD O RETRO GEN II DARK EARTH 07-556G2D-SPR-17 07-556G2D-SPR-18 UPPER RECEIVER LOWER RECEIVER BARRELS GAS BLOCK TRIGGER FOREARM PISTOL GRIP B5 BRAVO STOCK BUIS RAILS MUZZLE DEVICE WEIGHT / LENGTH ACCURACY BUFFER & TUBE INCLUDED 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1:7 TWIST 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1:8 TWIST + QUALIFIED FFL DEALER REQUIRED FOR PURCHASE + PLEASE ALLOW 5~10 DAYS FOR ASSEMBLY AND TESTING PRIOR TO SHIPPING Forged T6 7075 Hard Coat Anodized Aluminum Forged T6 7075 Hard Coat Anodized Aluminum 18 5.56/2.23 Douglas 416 Stainless Steel, M4 feed ramps, 1:7 Twist 18 5.56/2.23 Douglas 416 Stainless Steel, M4 feed ramps, 1:8 Twist Flip Up Front Sight Gas Block With 2 Cross Bolts For Securing Standard Trigger Rifle Length with Dark Earth Finish A2 Pistol Grip Dark Earth Finish Mil Spec Adjustable Rear Sight provided that works with Gas Block Sight All Rails plus SPR PEQ II Full Length Top Rail ½ X 28 Threaded AE Brake and Collar 5.2 Pounds / 27 with Stock 5.56 Douglas sub MOA Mil spec 6 Position Gas Buster Charging Handle with Big Latch RIFLES + UPPERS MARK 12 MOD O RETRO GEN II ROUND UPPER BLACK MARK 12 MOD O RETRO GEN II ROUND UPPER DARK EARTH 07-556G2B-18 07-556G2B-17 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1:8 TWIST 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1:7 TWIST 07-556G2D-18 07-556G2D-17 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1:8 TWIST 5.56 /.223 RIFLE; 18 DOUGLAS BARREL; 1:7 TWIST + MSTN BRAKE CAN BE INSTALLED UPON REQUEST AT A DISCOUNTED PRICE + AVAILABLE WITH DARK EARTH FOREARMS & RECEIVER UPON REQUEST. + MSTN BRAKE CAN BE INSTALLED UPON REQUEST AT A DISCOUNTED PRICE + AVAILABLE WITH DARK EARTH FOREARMS & RECEIVER UPON REQUEST. 66 67

TOOLS + ASSEMBLY

REMINGTON 700 RECEIVER BLOCK PRI has designed a receiver block to hold a Remington 700 long or short actions, for a light machine work on a drill press, milling machine or hand held power tools. It can also be used as a stable platform for holding the barrel action while attaching a scope or sighting system and rough sighting of the system. The receiver is manufactured from hard coated black anodized aluminum. System comes with two bubble tubes for leveling and two mounting screws so you do not have to use your rifle mounting screws. 02-REM-RB1 STRIPPED LOWER PRI stripped lower assembly is a forged 7075 T6 Hard coat black anodized aluminum. Qualified FFL dealer is required for this purchase. 07-PRI-L01 COMPLETE LOWER ASSEMBLY Forged 7075 T6 hard coated black anodized aluminum. Assemblies include: Fully Assembled Lower Parts Kit With 2 Stage Standard Trigger, 6 Position B5 Bravo Stock and Tube, Standard Buffer and Pistol Grip. 07-PRI-CL1 TOOLS + ASSEMBLY PRI AR15 / M16 VISE ASSEMBLY BLOCK This block allows you to easily work on the M-16. Gripping the upper receiver by the rail allows you to clean the barrel or work on the underside of the receiver. By gripping the lower receiver pins, sights or optics can be roughed in. Also can be used for AR10 flat-top. Constructed of hard coated aluminum. 05-0083 AR15 LOWER PARTS KIT AR15 lower parts kit complete with hammer, trigger and black pistol grip. Lower parts kit comes is color coded kit for easier assembly of your lower. Each color code is tied to a area of the lower receiver. 07-LPK-01B BLACK 07-LPK 01DE DARK EARTH PRI AR15 /.308 VISE ASSEMBLY BLOCK This block allows you to easily work on the M-16 or a.308 upper. Gripping the upper receiver by the lower receiver pin, the gun can be cleaned or sights and optics can be roughed in. Constructed of hard coated aluminum. 03-0084 PRI AR15 +.308 TOOL BOX This is a series of PRI s tools for building and assembling PRI s and other manufactures products onto custom uppers. The tools are held inside a custom foam cut case to keep the tools together and organized. Tools included in the tool box are: AR15/.308 assembly vise block, forearm spanner wrenches for PRI s forearms, Roll pin starter kit for low profile gas blocks, MSTN brake wrench for installing the MSTN brakes, Front sight adjustment tool, 2 torque wrenches T15 and T25 and barrel nut wrenches for the AR15, DPMS, and Armalite. 05-TB-01 70 71

RUN OUT RIG The PRI Run Out Rig is a simple to use, rugged device that measures the concentricity or alignment of the bullet to the cartridge case and gives the user the means to correct the bullet alignment. Locating from the bullet tip and the base rim, the ROR is able to check and correct cartridges from the.221 Fireball to the 50 BMG. Cut your cost by improving cheaper ammo s accuracy and tighten groups with one tool. The adjustable dials, stops and locators allow right or left hand setup. 05-ROR-01 GAS BLOCK FIXTURE w/ ROLL PIN STARTER A great tool for assembling your gas system 05-0100 ROLL PIN STARTER KIT 05-0101 ROLL PIN STARTER INSTALLATION WRENCH This wrench is designed to help with the installation of the brakes with out damaging it & designed to go into the slot that is next to the barrel. 05-MSTN-W1 ASSEMBLY GENIII AR10 FOREARM WRENCH Gen III AR10 Forearm Wrench for assembling carbon fiber forearm to upper receiver. ARMORERS BARREL NUT TORQUE WRENCHES 03-0081 ARMALITE COMBO PRI has taken their very popular AR15 &.308 barrel nut torque wrenches and added a handle and some visual alignment holes to help with gas tube alignment. They gives the operator a means of loosening tight barrel nuts with out having to use their actual torque wrenches. The handle can also help the operator work the threads before finish torque is achieved. The alignment holes help the operator align the gas tube hole up during final torque. The AR15 hole pattern is set for 20 holes on a 1.56 bolt circle or a.78 radius. ID of the center hole is 1.08. The.308 wrenches for DPMS & Armalite are both two-sided wrenches with four hardened pins on each side to accommodate the differences in barrel nuts. Hole ID of the Armorers wrenches are 1.25 +SEE THE HOLE PATTERN INFORMATION FOR EACH WRENCH BELOW. 05-0084 - AR15 03-0082 - DPMS 03-0083 ARMALITE AR15 PRI BARREL NUT TORQUE WRENCH This wrench allows the shooter to put the exact amount of pressure needed on the barrel nut while attaching the barrel to the receiver. Constructed of high strength steel with 5 tightening fingers. This wrench is set up on a 20 hole pattern with a 1.56 bolt circle or a.78 radius. Hole ID is 1.08 05-0082.308 DPMS + KAC BARREL NUT TORQUE WRENCH This wrench allows the shooter to put the exact amount of pressure needed on the barrel nut while attaching the barrel to the receiver. Constructed of high strength steel with 4 lugs on each side to accommodate the DPMS barrels nut and KAC barrel nuts. Side A is a 24 hole pattern on a 1.72 bolt circle or.860 Radius. Side B is a 20 hole pattern on a 1.56 bolt circle or.78 radius. Hole ID is 1.25. 03-0086 TOOLS + ASSEMBLY AR15/M16 PRI FOREARM WRENCH Designed to tighten PRI s AR15 carbon fiber forearm to the upper receiver. 05-0081 This wrench allows the operator to remove Armalite s A2 style barrel nut and then install Armalites standard barrel nut and PRI s as well as others with same hole pattern. This wrench was designed to put the exact amount of pressure needed on the barrel nut while attaching the barrel to the receiver. Constructed of high strength steel with 5 pins on one side and 4 pins on the other. Hole ID is 1.25. 03-0085C 72 73

A.R.M.S. #40 STAND ALONE FLIP-UP REAR SIGHT The sight flips up into place ready to use with the simple releasing lever. Spring tension holds the sight in the up position. 06-040 STANDARD 06-040L LOW PROFILE PRI LOGO HATS PRI Logo cap in black and tan with red sandwiched bill and embroidered name on bill and velcro adjusted strap. 00-BLACKHAT 00-TANHAT 00-CAMOHAT PRI LOGO T-SHIRTS Shirts are 100% cotton pre-shrunk. Made in the USA. 00-BLACK SHIRT 00-USASHIRT-1 00-GREEN MK12T 00-MARK 12 MOD 0 SHIRT For the fastest order processing, visit our website and order direct from our online catalog at: precisionreflex.com. Our entire catalog is on the Internet along with exciting new products and developments. The Internet ordering is easy and secure. Many of our online orders are processed and shipped within 2 days (with the exception of back-ordered items). Customer service and technical support inquiries can also be handled quickly and efficiently by email. Contact us at: info@precisionreflex.com. Become a dealer of the PRI product line: You will need to fax a copy of your FFL or state tax form to (419) 629-2173. Or you can register online at the Log In prompt on the PRI homepage. Just fill in the required information for dealer pricing access. There will be a 48 hour wait time after registering for an account before you may order and receive dealer prices due to verification of FFL or tax form. For telephone ordering: 419-629-2603 Our phone lines are open 8:00 a.m. - 3:30 p.m. (EST) Monday thru Friday. To talk to a sales consultant please call Monday thru Friday 8:00 a.m. to 3:30 p.m. (EST). For FAX ordering: 419-629-2173 PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE All catalog prices are in U.S. Dollars Please have your credit card ready. We will NOT charge your credit card until we ship your order. We accept purchase orders from Federal, State, Local Governments and Institutions, and government credit cards. Shipping: All products are shipped UPS. Lost or damaged items are the responsibility of UPS or the customer. UPS Next Day Air, 2nd Day Air, and 3rd Day Air, are available upon request and at the customer s expense. Money-Back Guarantee: If you are not satisfied with your product you may return it within 30 days for a refund, minus shipping costs and a 10% restocking fee. Item must be in 100% original condition with all labels and papers. Prior authorization is required before returning any items. See website for addtional information on return policy. ORDERING INFORMATION Special Orders: Please call 419-629-2603. Special orders require a deposit upon order placement. Restrictions: The Federal ban on assault weapons has been lifted; The Federal Ban only. Some states still have bans and limitations on firearms and feeding devices. The ultimate responsibility for knowledge of the law and abiding by the state laws is the customer s. Please know the law and order parts responsibly. 74 NOTICE: PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE ON ALL PRODUCTS. Military & Law Enforcement Discount Program: To receive Military or L.E. discounts simply fax us a copy of your Military or L.E ID to 419-629-2173 or e-mail to info@precisionreflex.com. Then go on line at log in prompt on the PRI homepage. Just fill out the required information. There will be a 48 hour wait time after registering for an account before you may order and receive the discounted price. 75