an ISO 900:2008 Registered Company 958-62 CORVETTE CONDENSER w/drier 0258 9054 REV C /2/3 58-62 CORVETTE COND W/DRIER INST PG OF 9
Table of Contents PAGES. COVER 2. TABLE OF CONTENTS 3. PACKING LIST/PARTS DISCLAIMER 4. MOUNTING BRACKET INSTALLATION 5. DRIER MOUNTING BRACKET & DRIER INSTALLATION 6. CORE SUPPORT MODIFICATION 7. HARDLINE & CONDENSER INSTALLATION 8. CORE SUPPORT COVER & HARDLINE INSTALLATION CONT. 9. PACKING LIST 9054 REV C /2/3 58-62 CORVETTE COND W/DRIER INST PG 2 OF 9 2
No. QTY. PART No. DESCRIPTION CONDENSER KIT 0258. 2. 3. 4. 5. 6. 7. 8. 9. 0.. 2. 3. 4. 5. 6. 7. 8. 2 2 2 3 5 03765-VUC 073-VUB 0732-VUC 644057 644058 64405 0958 0959 3530-VCG 8260-VUB 8249-VUB 33857-VUF 33858-VUF 8247-VUB 079-VUS 2335-VUW 644060 3334-VUI 4 X 20 PARALLEL FLOW COND. DRIER CLAMP DRIER BRKT 58-62 VETTE DS COND BRKT 58-62 VETTE PS COND BRKT 58-62 VETTE DRIER HARDLINE 58-62 VETTE #6 DRIER/CORE HARDLINE 58-62 VETTE #8 COND HARDLINE 58-67 VETTE COND/DRIER 0-24 NUT w/star WASHER 0-24 x ⅜ PAN HEAD SCREW #6 O-RING #8 O-RING #0 x ½ HEX SCREW MALE BINARY SWITCH COMPRESSOR LEAD BRKT 58-62 VETTE CORE SUPPORT COVER 2 HOLE GROMMET ** BEFORE BEGINNING INSTALLATION OPEN ALL PACKAGES AND CHECK CONTENTS OF SHIPMENT. PLEASE REPORT ANY SHORTAGES DIRECTLY TO VINTAGE AIR WITHIN 5 DAYS. AFTER 5 DAYS, VINTAGE AIR WILL NOT BE RESPONSIBLE FOR MISSING OR DAMAGED ITEMS. 3 2 4 5 6 7 8 9 0 2 3 3 4 5 6 7 8 9054 REV C /2/3 58-62 CORVETTE COND W/DRIER INST PG 3 OF 9
NOTE: MARK HINGE LOCATION ON HOOD AND REMOVE HOOD. REMOVE HOOD PROP. MOUNTING BRACKET INSTALLATION INSTALL DRIER MOUNTING BRACKETS ON TO CONDENSER USING 0-24 x 3/8 PAN HEAD SCREWS AND 0-24 NUTS WITH STAR WASHERS AS SHOWN BELOW. NOTE: BRACKETS MOUNT THROUGH THE st AND 3rd HOLE ON THE BACK SIDE OF CONDENSER. st HOLE 3rd HOLE BACK VIEW SIDE VIEW OF CONDENSER 58-62 VETTE DS COND BRKT 644057 0-24 NUT W/ STAR WASHER 8260-VUB 58-62 VETTE PS COND BRKT 644058 0-24 X 3/8 PAN HEAD SCREW 8249-VUB #8 FITTING TOWARDS ENGINE 58-62 VETTE PS COND BRKT 644058 #6 FITTING 9054 REV C /2/3 58-62 CORVETTE COND W/DRIER INST PG 4 OF 9 4
DRIER MOUNTING BRACKET INSTALLATION INSTALL DRIER MOUNTING BRACKET ON TO CONDENSER USING 0-24 x 3/8 PAN HEAD SCREWS AND 0-24 NUTS WITH STAR WASHERS AS SHOWN BELOW. NOTE: BRACKET MOUNTS THROUGH THE ST AND 3RD HOLE IN THE CONDENSER. 0-24 NUT w/star WASHER 58-62 VETTE DRIER BRKT 64405 0-24 x 3/8 PAN HEAD SCREW DRIER INSTALLATION INSTALL DRIER CLAMPS ON DRIER AS SHOWN. USING (2) #0 x /2 SHEETMETAL SCREWS INSTALL DRIER ON BRACKET IN THE 4TH AND 6TH HOLES FROM THE TOP. NOTE: REFRIGERANT FLOW THROUGH DRIER IS IN FROM CONDENSER, OUT TO EVAPORATOR. #8 FITTING (2) DRIER CLAMPS 073-VUB IN DRIER 0732-VUC 4TH HOLE 6TH HOLE FLOW 5 #6 FITTING (2) #0 x /2 SHEETMETAL SCREW 8247-VUB 9054 REV C /2/3 58-62 CORVETTE COND W/DRIER INST PG 5 OF 9
CORE SUPPORT MODIFICATION 58-59 FOR PROPER HOOD CLEARANCE, REMOVE X BRACES FROM RADIATOR CORE SUPPORT AS SHOWN BELOW. CORE SUPPORT REMOVE REMOVE CORE SUPPORT MODIFICATION 60-62 FOR PROPER HOOD CLEARANCE, REMOVE X BRACES FROM RADIATOR CORE SUPPORT AS SHOWN BELOW. CORE SUPPORT REMOVE REMOVE 9054 REV C /2/3 58-62 CORVETTE COND W/DRIER INST PG 6 OF 9 6
HARDLINE INSTALLATION LUBRICATE (2) #6 O-RING (SEE FIGURE, PAGE 8) AND INSTALL THE #6 COND/DRIER HARDLINE AS SHOWN. #6 O-RING 33857-VUF #6 HARDLINE COND/DRIER 3530-VCG #6 O-RING 33857-VUF CONDENSER INSTALLATION INSTALL CONDENSER TO CORE SUPPORT BETWEEN INNER FENDER & CORE SUPPORT AS SHOWN BELOW. CORE SUPPORT TOWARDS ENGINE OEM BOLTS 7 SIDE VIEW 9054 REV C /2/3 58-62 CORVETTE COND W/DRIER INST PG 7 OF 9 SIDE VIEW (INSTALLED)
CORE SUPPORT COVER INSTALLATION REMOVE OEM SCREEN COVER AND INSTALL CORE SUPPORT COVER USING (3) #0 x /2 SHEET METAL SCREWS AS SHOWN. REMOVE CORE SUPPORT COVER 644060 OEM SCREEN COVER (3) #0 x /2 SHEETMETAL SCREW 8247-VUB HARDLINE INSTALLATION CONT. LUBRICATE #6 O-RING AND INSTALL THE #6 DRIER/CORE HARDLINE. LUBRICATE #8 O-RING AND INSTALL THE #8 COND HARDLINE AS SHOWN. (SEE FIGURE ) INSTALL 2 HOLE GROMMET AND SAFETY SWITCH AS SHOWN. RE-INSTALL HOOD AND HOOD PROP. #8 COND HARDLINE 0959 #8 O-RING 33858-VUF O-RING HOLD WITH THIS WRENCH TWIST WITH THIS WRENCH 2 HOLE GROMMET 3334-VUI SAFETY SWITCH (BINARY TYPE) 079-VUS FOR A PROPER SEAL OF FITTINGS, INSTALL SUPPLIED O-RINGS AS SHOWN AND LUBRICATE WITH SUPPLIED OIL. O-RING SUPPLIED OIL FOR O-RINGS MALE INSERT #6 O-RING #8 O-RING O-RING,INSTALLS OVER MALE INSERT TO SWAGED LIP #6 DRIER/CORE HARDLINE 0958 #6 O-RING 33857-VUF FEMALE NUT FIGURE 8 9054 REV C /2/3 58-62 CORVETTE COND W/DRIER INST PG 8 OF 9
No. QTY. PART No. DESCRIPTION CONDENSER KIT 0258. 2. 3. 4. 5. 6. 7. 8. 9. 0.. 2. 3. 4. 5. 6. 7. 8. 2 2 2 3 5 03765-VUC 073-VUB 0732-VUC 644057 644058 64405 0958 0959 3530-VCG 8260-VUB 8249-VUB 33857-VUF 33858-VUF 8247-VUB 079-VUS 2335-VUW 644060 3334-VUI 4 X 20 PARALLEL FLOW COND. DRIER CLAMP DRIER BRKT 58-62 VETTE DS COND BRKT 58-62 VETTE PS COND BRKT 58-62 VETTE DRIER HARDLINE 58-62 VETTE #6 DRIER/CORE HARDLINE 58-62 VETTE #8 COND HARDLINE 58-67 VETTE COND/DRIER 0-24 NUT w/star WASHER 0-24 x ⅜ PAN HEAD SCREW #6 O-RING #8 O-RING #0 x ½ HEX SCREW MALE BINARY SWITCH COMPRESSOR LEAD BRKT 58-62 VETTE CORE SUPPORT COVER 2 HOLE GROMMET CHECKED BY: PACKED BY: DATE: 3 2 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9054 90048 REV B A 02/08/ 08/23/058-62 68 CORVETTE COND W/DRIER INST INST PG PG 9 OF 9 OF 29