Chapter 1 Pipes and fittings PVC - PE

Chapter 1 Pipes and fittings PVC - PE Solvent weld fittings Threaded connections Ball valves & butterfly valves Page 1-20 Page 21-33 Page 34-37 Slide valves & check valves Solvents & sealants Tools Page 38-42 Page 43-48 Page 49-50 Pipes & fittings Flexible fittings Drainage Page 51-64 Page 65-66 Page 67 Waste pipes & fittings Floor drains & channel drainage WAFIX SN4 push fit fittings Page 68-78 Page 79-80 Page 81-85 Türi 6A 11313, Tallinn www.tiigitehnika.ee Tel.: +372 51 03 709 Tel: +372 56 699 060 E-mail: info@tiigitehnika.ee Tiigitehnika OÜ reg. 12656504 KMKR: EE101792783

SOLVENT WELD FITTINGS 1PIPES SOLVENT & FITTINGS WELD FITTINGS PVC - PE - PP PVC FITTINGS ECONO-LINE Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards. Suited for i.e. irrigation, swimming pools, ponds, etc. Very competitive in price! Manufacture can vary. PVC SOCKET ECONO-LINE code 112 SIZE ARTNR. EURO QNT. 32mm AA808 0,46 300 40mm AA809 0,62 200 50mm AA810 0,84 250 63mm AA811 1,28 130 75mm AA812 2,19 80 90mm AA813 3,84 25 110mm AA814 5,75 27 PVC ELBOW 90 ECONO-LINE code 112 SIZE ARTNR. EURO QNT. 32mm AA848 0,70 180 40mm AA849 1,11 120 50mm AA850 1,30 150 63mm AA851 2,62 80 75mm AA852 4,65 50 90mm AA853 6,50 25 110mm AA854 10,95 14 PVC ELBOW 45 ECONO-LINE code 112 SIZE ARTNR. EURO QNT. 32mm AA858 1,08 250 40mm AA859 1,32 150 50mm AA861 1,54 200 63mm AA862 2,60 100 75mm AA863 4,65 50 90mm AA864 6,80 36 110mm AA865 11,75 20 PVC EQUAL T 90 ECONO-LINE code 112 SIZE ARTNR. EURO QNT. 32mm AA869 0,78 120 40mm AA870 1,53 90 50mm AA871 2,02 100 63mm AA872 3,03 50 75mm AA873 5,50 35 90mm AA874 8,35 20 110mm AA875 14,65 14 PVC 3/3 UNION WITH 0-RING ECONO-LINE code 112 SIZE ARTNR. EURO QNT. 50mm AA886 4,16 50 63mm AA887 6,60 30 April 2018 1-1

SOLVENT WELD FITTINGS PVC MALE THREADED / PLAIN SOCKET NIPPLE ECONO-LINE code 112 SIZE ARTNR. EURO QNT. 32mm x 1 AA891 0,61 300 40mm x 1¼ AA892 0,93 250 50mm x 1½ AA893 1,32 150 63mm x 2 AA894 1,93 100 PVC FEMALE THREADED / PLAIN SOCKET ECONO-LINE code 112 SIZE ARTNR. EURO QNT. 32mm x 1 AA966 1,19 300 40mm x 1¼ AA967 2,08 200 50mm x 1½ AA968 2,49 130 63mm x 2 AA969 3,29 100 PVC END PLUG ECONO-LINE code 112 SIZE ARTNR. EURO QNT. 32mm AA985 0,62 500 40mm AA986 0,78 420 50mm AA987 1,06 220 63mm AA988 1,50 120 PVC REDUCER ECONO-LINE code 112 SIZE ARTNR. EURO QNT. 40 x 32 AA976 0,49 594 50 x 40 AA977 0,70 300 63 x 50 AA978 1,25 200 PVC BALL VALVE PLAIN ECONO-LINE code 112 ARMATUREN SIZE ARTNR. EURO QNT. 32mm AA991 3,48 100 40mm AA992 5,65 60 50mm AA993 7,15 35 63mm AA994 10,60 15 PVC BALL VALVE DOUBLE UNION ECONO LINE code 127 Valve with a very competitive price! This valve is recommended for light applications like irrigation, ponds, etc. Not suited for industrial use. We recommend to use this valve only for fully open or fully closed applications. Working pressure: 25 until 63 mm: 16 bar at 20 C, 75 until 110 mm: 10 bar at 20 C. SIZE ARTNR. EURO QNT. 25mm AD088 7,50 88 32mm AD089 9,85 60 40mm AD090 12,65 40 50mm AD091 14,85 24 63mm AD092 21,85 13 75mm AD093 50,65 8 110mm AD094 159,00 2 1-2 April 2018

SOLVENT WELD FITTINGS AQ SERIES PVC FITTINGS The AQ series is a line of PVC fittings produced by Cepex specifically for pool and pond applications. The fittings are suitable for 16 bar pressure. We think you'll be impressed by the prices! ELBOW 90 PN 16 AQ-SERIES code 100 D PN ARTNR. EURO BOX by 50 16 PV01050 1,36 70 63 16 PV01063 2,40 36 75 16 PV01075 4,77 21 90 16 PV01090 7,05 12 110 16 PV01110 13,50 7 ELBOW 45 PN 16 code 100 D PN ARTNR. EURO BOX by 50 16 PV02050 1,45 40 63 16 PV02063 2,36 20 75 16 PV02075 5,55 25 90 16 PV02090 8,00 15 110 16 PV02110 12,15 8 EQUAL T 90 PN 16 code 100 D PN ARTNR. EURO BOX by 50 16 PV03050 2,11 48 63 16 PV03063 3,28 30 75 16 PV03075 6,60 15 90 16 PV03090 11,15 8 110 16 PV03110 17,45 5 SOCKET PN 16 code 100 D PN ARTNR. EURO BOX by 50 16 PV05050 1,14 60 63 16 PV05063 1,80 35 75 16 PV05075 4,02 20 90 16 PV05090 5,30 18 110 16 PV05110 8,40 12 REDUCER PN 16 code 100 D x D PN ARTNR. EURO BOX by 63 x 50 16 PV06063 1,14 48 75 x 63 16 PV06075 1,73 28 90 x 75 16 PV06090 2,86 36 110 x 90 16 PV06110 5,40 16 END PLUG PN 16 code 100 D PN ARTNR. EURO BOX 50 16 PV07050 1,23 48 63 16 PV07063 1,66 24 75 16 PV07075 3,20 32 90 16 PV07090 5,75 16 110 16 PV07110 10,10 9 by April 2018 1-3

SOLVENT WELD FITTINGS MALE THREADED / PLAIN SOCKET NIPPLE PN 16 code 100 D PN ARTNR. EURO BOX by 40 x 50 x 1½ 16 PV15450 1,31 24 50 x 63 x 2 16 PV15463 2,15 38 MALE THREADED / PLAIN SOCKET NIPPLE PN 16 code 100 D PN ARTNR. EURO BOX by 50 x 1½ 16 PV17450 1,54 48 3/3 UNION PN 16 code 100 D PN ARTNR. EURO BOX by 50 16 PV50050 4,00 30 63 16 PV50063 6,35 12 3/3 UNION SOLVENT X FEMALE THREADED PN 16 code 100 D PN ARTNR. EURO BOX by 50 x 1½ 16 PV50450 5,45 30 63 x 2 16 PV50463 8,00 12 3/3 UNION SOLVENT X MALE THREADED PN 16 code 100 D PN ARTNR. EURO BOX by 50 x 1½ 16 PV51250 6,10 30 3/3 UNION SOLVENT X MALE THREADED PN 16 code 100 D PN ARTNR. EURO BOX by 50 x 1½ 16 PV51450 5,25 30 63 x 2 16 PV51463 9,05 12 BALL VALVE SOLVENT WITH DOUBLE UNION PN 16 code 127 D PN ARTNR. EURO BOX by 20 16 PV2001 7,45 24 25 16 PV2002 8,15 16 32 16 PV2003 10,30 10 40 16 PV2004 12,45 6 50 16 PV2005 15,35 8 63 16 PV2006 21,85 12 75 16 PV2007 64,55 1 90 16 PV2008 98,40 1 110 (DN80) 16 PV2010R 114,00 1 1-4 April 2018

INCH SOLVENT WELD FITTINGS INCH SOLVENT WELD FITTINGS REDUCING SOCKET METRIC - IMPERIAL (MM - INCH) PLAIN/PLAIN code 100 SIZE ARTNR. EURO 40 mm plain x 1¼ plain (42mm) AA084 1,79 50 mm plain x 1½ plain (48,2mm) AA085 2,32 63 mm plain x 2 plain (60,3mm) AA086 3,40 INCH TO MM SOLVENT INSERT REDUCING SOCKET METRIC - IMPERIAL (MM - INCH) PLAIN/PLAIN code 109/111 SIZE ARTNR. EURO CODE 50/63 mm plain internal x 1½ plain (48,3mm) external AA090 4,06 111 63 mm plain internal x 2 plain (60,3mm) external AA491 5,10 109 INCH TO MM SOLVENT SOCKET INCH SOLVENT code 111 Plain socket in English/American inch size. SIZE PN ARTNR. EURO 1½ 16 AA664 1,75 2 16 AA665 3,04 INCH SOLVENT ELBOW 90 INCH SOLVENT code 111 Solvent elbow in English/American inch size. SIZE PN ARTNR. EURO 1½ 16 AA674 2,51 2 16 AA675 4,18 INCH SOLVENT ELBOW 45 INCH SOLVENT code 111 Solvent elbow in English/American inch size. SIZE PN ARTNR. EURO 1½ 16 AA684 2,94 2 16 AA685 4,37 INCH SOLVENT EQUAL T INCH SOLVENT code 111 Solvent equal T in English/American inch size. SIZE PN ARTNR. EURO 1½ 16 AA694 4,05 2 16 AA695 6,45 INCH SOLVENT 3/3 UNION WITH 0-RING INCH SOLVENT code 111 SIZE PN ARTNR. EURO 1½ 16 AA704 7,00 2 16 AA705 9,05 INCH SOLVENT REDUCER INCH SOLVENT code 111 Reducer in English/American inch size. SIZE ARTNR. EURO 2 x 1½" AA714 2,24 INCH SOLVENT April 2018 1-5

INCH SOLVENT WELD FITTINGS REDUCER METRIC TO INCH SOLVENT code 111 Reducer metric outside diameter English/American inch inside diameter. SIZE ARTNR. EURO 50mm external x 1½" (48,3mm) internal AA764 0,90 63mm external x 2 (60,3mm) internal AA765 1,82 METRIC - INCH SOLVENT MALE THREADED / PLAIN SOCKET NIPPLE INCH SOLVENT code 111 Nipple in English/ American inch sizes. SIZE ARTNR. EURO 1½" solvent socket x 1½" male AA734 2,45 2" solvent socket x 2" male AA735 4,31 INCH SOLVENT FEMALE THREADED PLAIN SOCKET INCH SOLVENT code 111 Threaded socket in English/American inch sizes. SIZE ARTNR. EURO 1½" solvent socket x 1½" female AA744 3,65 2" solvent socket x 2" female AA745 5,55 INCH SOLVENT EXTENSION ADAPTOR BUSH INCH SPIGOT x FEMALE code 111 Extension adaptor English/American inch spigot x female. D X D ARTNR. EURO 1" solvent male x 1" female AB184 3,66 1½" solvent male x 1½" female AB186 4,88 2" solvent male x 2" female AB187 8,35 INCH SOLVENT 3/3 UNION PLAIN SOCKET / MALE THREAD INCH SOLVENT code 111 3/3 Male union plain socket in English/American inch sizes. D x D ARTNR. EURO 1½" solvent x 1½" male AA754 11,45 2" solvent x 2" male AA755 18,70 INCH SOLVENT BALL VALVE PLAIN DOUBLE UNION INCH SOLVENT code 111 - O-ring EPDM 70 sh, ball assembly: PTFE (Teflon). operational pressure 16 bar at 20 C. - Valves are delivered with a threaded collar, which holds the ball in its place for easier operation. SIZE PN ARTNR. EURO 1½ solvent 16 AA724 26,60 2 solvent 16 AA725 36,15 INCH SOLVENT VALTERRA SLIDE VALVES 2 X PLAIN SOCKET INCH SOLVENT code 808 PVC slide valve with Stainless Steel spindle with triple sealing at the top (3 x O-ring). Application: ponds, pools, whirlpools, tanks, glasshouses. The Valterrra slide valves are equipped with Santoprene seals (100% chemical resistant) which are suited for vacuum and pressure. 0 SIZE ARTNR. EURO OPERATIONAL PRESS. AT 20 C QNT. (BOX) 1½ SB131 13,90 max. 3,5 bar 26 2 SB132 20,55 max. 2,8 bar 34 INCH SOLVENT 1-6 April 2018

SOLVENT WELD FITTINGS SOLVENT WELD FITTINGS PVC FITTING CONNECTOR code 136 PVC injection moulded connectors for rapid adhesive connection of fittings. Saves a lot of time (no more sawing and deburring short pieces of pipe). Connectors have a bevelled edge for good distribution of the adhesive. SIZE (D) L PN ARTNR. EURO BOX Ø20 mm 34mm 16 AF090 0,73 350 Ø25mm 40mm 16 AF091 0,75 400 Ø32mm 46mm 16 AF092 0,78 250 Ø40mm 52mm 16 AF093 1,42 200 Ø50mm 65mm 16 AF094 1,99 180 Ø63mm 79mm 16 AF095 2,27 80 SAVE A LOT OF TIME! SOCKET PN 16 code 100 D PN ARTNR. EURO L Z E BOX D PN ARTNR. EURO L Z E BOX 10 16 AA098 0,66 12 3-300 90 16 AA108 6,70 51 5 106 45 12 16 AA099 0,68 12 3 18 300 110 16 AA109 9,20 61 6 129 27 16 16 AA100 0,61 14 3 23 600 125 16 AA110 19,95 69 7 145 20 20 16 AA101 0,61 16 3 26,5 400 140 16 AA111 28,30 76 8 161 12 25 16 AA102 0,63 19 3 33 500 160 16 AA112 33,90 86 8 182 6 32 16 AA103 0,78 22 3 41 300 200 10 AA113 72,30 106 10 227 3 40 16 AA104 1,07 26 3 50 200 *225 10 AA114 80,55 119 11 258 1 50 16 AA105 1,32 31 3 60,5 220 250 10 AA115 149,00 131 11 272 1 63 16 AA106 1,95 38 3 75 125 *315 10 AA116 224,00 164 12 355 1 75 16 AA107 4,40 44 4 88 85 SIGHT/INSPECTION GLASS code 100 2 x solvent weld, nut and bolt, PN6 (50 and 63 mm) or PN 10 (75-125 mm). Type A has stainless steel nuts and bolts. Type B has zinc plated nuts and bolts. D ARTNR. EURO L H E QNT. TYPE 50 AA040 24,95 31 130 80 12 A 63 AA041 30,05 38 159 92 12 A 75 AA042 75,45 44 165 185 3 B 110 AA044 114,00 61 250 220 2 B *125 AA045 130,00 69 280 230 1 B SIGHTGLAS WITH SOLVENT SOCKET code 808 Sightglass made from transparent pipe provided with PVC solvent sockets. Max. pressure 4 bar. SIZE ARTNR. EURO 50mm SB220A 10,20 63mm SB221 14,50 110mm SB224A 27,30 SIGHTGLAS WITH PVC UNION code 808 Sightglass made from transparent pipe provided with PVC unions. Max. pressure 4 bar. SIZE ARTNR. EURO 50mm SB225 15,60 63mm SB226 22,00 April 2018 1-7

SOLVENT WELD FITTINGS PUSHFIT/REPAIR SOCKET code 100 Pressure repair socket without buffer. D PN ARTNR. EURO LENGTH D PN ARTNR. EURO LENGTH 40 10 AA060 21,70 150mm 110 8 AA070 35,60 193mm 50 10 AA062 21,70 153mm 110 10 AA072 59,25 194mm 63 10 AA064 19,50 163mm 125 10 AA074 49,90 201mm 75 10 AA066 26,95 168mm *160 8 AA076 62,15 218mm 90 10 AA068 31,30 175mm *160 10 AA078 89,15 218mm REDUCING SOCKET PN 16 code 109 d1/d X d2 ARTNR. EURO L L1 L2 Z E QNT. 12/16 x 10 AA468 1,29 12 12 14 6-250 16/20 x 10 AA469 1,45 14 12 16 6-250 20/25 x 12 AA471 1,57 16 12 19 9-125 20/25 x 16 AA470 1,07 16 14 19 6 23 500 25/32 x 16 AA472 1,18 19 14 22 6 23 300 25/32 x 20 AA473 1,18 19 16 22 6 28 300 32/40 x 20 AA476 1,25 22 16 26 6 28 170 32/40 x 25 AA477 1,25 22 19 26 6 33 170 40/50 x 25 AA480 1,52 26 19 31 10 33 220 40/50 x 32 AA481 1,52 26 22 31 10 41 220 50/63 x 32 AA485 2,36 31 22 38 12 41 130 50/63 x 40 AA486 2,36 31 26 38 12 50 130 63/75 x 40 AA490 5,10 38 26 44 17,2 50 100 63/75 x 50 AA491 5,10 38 31 44 12,3 61 100 75/90 x 50 AA495 6,55 44 31 51 17,5 61 60 75/90 x 63 AA496 6,55 44 38 51 11,1 75 60 90/110 x 50 AA499 9,50 51 31 61 28 61 36 90/110 x 63 AA500 9,50 50 38 61 21,5 75 36 90/110 x 75 AA501 9,50 51 44 61 15,7 88 36 110/125 x 63 AA504 13,85 61 38 69 27,5 75 42 110/125 x 75 AA505 13,85 61 44 69 22,8 88 42 110/125 x 90 AA506 13,85 61 51 69 17 106 42 125/140 x 90 AA510 21,70 69 51 76 24,8 106 20 125/140 x 110 AA511 21,70 69 61 76 16,8 129 20 140/160 x 110 AA516 33,95 76 61 86 18 129 12 140/160 x 125 AA517 41,55 76 69 86 8 145 1 PVC PLAIN SOCKET FOR POOLFLEX MADE FROM TUBING code 136 Very handy sockets to bond flexible poolflex hose. The poolflex will not sag, thanks to the extra-long socket. Working pressure: 10 bar. d1 d2 TYPE ARTNR. EURO d1 d2 A B Z1 Z2 A Z1 B 50mm plain/spigot AF146 10,10 50 50 31 62 ±10-63mm plain/spigot AF147 10,90 63 63 38 76 ±10-2 x 50mm AF148 15,30-50 - 62 ±10 ±10 d2 d2 2 x 63mm AF149 16,80-63 - 76 ±10 ±10 B Z1 Z2 Z1 B 1-8 April 2018

SOLVENT WELD FITTINGS 90 ELBOW PN 16 code 100 D PN ARTNR. EURO L Z E QNT. 10 16 AA118 1,15 12 6-250 12 16 AA119 1,15 12 7 18 250 16 16 AA120 0,89 14 9 23 350 20 16 AA121 0,89 16 11 26,5 250 25 16 AA122 0,96 19 14 33 350 32 16 AA123 1,11 22 17 41 200 40 16 AA124 1,57 26 23 50 120 50 16 AA125 2,18 31 28 60,5 140 63 16 AA126 4,45 38 34 75 70 75 16 AA127 8,05 44 40 89 40 90 16 AA128 11,30 51 48 106 25 110 16 AA129 19,00 61 58 129 14 125 16 AA130 32,15 69 66 145 10 140 16 AA131 41,85 76 72 164 1 160 16 AA132 56,55 86 81 188 1 200 10 AA133 128,00 106 102 232 1 *225 10 AA134 169,00 119 115 258 1 *250 10 AA135 253,00 131 188 287 1 *315 10 AA136 450,00 164 236 359 1 90 REDUCING ELBOW PN 10 code 145 d1 x d2 ARTNR. EURO Z1 Z2 B C QNT. 40 x 32 AG140 1,73 22 22 26 22 200 50 x 32 AG141 2,50 28 33 31 22 150 50 x 40 AG143 2,81 28 29 31 26 135 PVC REDUCING KNEE 90 code 145 Very handy reducing fitting 90. D x D - d ARTNR. EURO DN PN L L1 E L 50 x 50-40 AG150 2,32 40 x 32 16 31 26 61 d D 63 x 63-50 AG151 4,59 50 x 40 16 38 31 76 L 1 L PVC REDUCING KNEE 45 code 145 D E Very handy reducing fitting 45 D x D - d ARTNR. EURO DN PN L L1 E L D d 50 x 50-40 AG152 2,73 40 x 32 16 31 26 61 63 x 63-50 AG153 4,59 50 x 40 16 38 31 76 L 1 L D E April 2018 1-9

SOLVENT WELD FITTINGS 45 ELBOW PN 16 KIWA code 100 D PN ARTNR. EURO L Z E QNT. 10 16 AA138 1,94 12 3,5-150 12 16 AA139 1,96 12 3,5 18 150 16 16 AA140 1,52 14 5 23 500 20 16 AA141 1,52 16 6 26,5 300 25 16 AA142 1,57 19 6 33 400 32 16 AA143 1,71 22 8 41 200 40 16 AA144 2,34 26 10 50 150 50 16 AA145 2,64 31 12 60,5 170 63 16 AA146 4,64 38 15 75 90 75 16 AA147 7,90 44 18 89 50 90 16 AA148 11,85 51 21 106 30 110 16 AA149 21,00 61 25 128 16 125 16 AA150 31,80 69 27 145 12 140 16 AA151 40,30 76 32 164 6 160 16 AA152 52,70 86 36 184 6 *200 16 AA153 112,00 106 43 232 1 *225 10 AA154 120,00 119 49 258 1 *250 10 AA155 226,00 131 58 286 1 *315 10 AA156 453,00 164 66 359 1 90 BEND INJECTION MOULDED PN 16 code 109 D ARTNR. EURO L E QNT. 20 AA330 2,90 16 27 60 25 AA331 3,26 19 33 40 32 AA332 4,08 22 41 24 40 AA333 5,35 26 50 25 50 AA334 8,15 31 61 30 63 AA335 14,90 38 76 30 75 AA336 31,75 44 90 20 90 AA337 40,30 51 110 12 110 AA338 65,90 61 132 6 S-BEND PN 10 MADE FROM TUBING code 139 D ARTNR. EURO Z B T V QNT. 32 AF195 4,64 35 22 57 60 150 40 AF196 5,55 40 26 63 60 150 50 AF197 7,30 50 31 55 85 80 made from tubing REDUCING SOCKET MADE FROM TUBING code 136 D x D PN ARTNR. EURO QNT. 90 x 50 12,5 AF140 12,45 50 160 x 110 7,5 AF142 31,85 12 * 160 x 125 10 AF143 31,85 12 200 x 160 10 AF145 60,85 8 1-10 April 2018

SOLVENT WELD FITTINGS 90 SWEPT BEND (MADE FROM TUBING) PN 10 code 139 d PN ARTNR. EURO Z B QNT. 32 10 AF150 2,23 58 22 150 40 10 AF151 2,97 72 26 100 50 10 AF152 4,36 90 31 50 63 10 AF153 6,80 95 38 25 75 10 AF154 8,95 113 44 20 90 10 AF155 17,00 135 51 10 110 12,5 AF156 29,80 165 61 10 125 12,5 AF157 38,15 188 69 6 *140 12,5 AF158 59,60 210 76 1 160 12,5 AF159 77,40 240 86 5 200 12,5 AF160 148,00 300 106 1 *250 12,5 AF161 286,00 375 131 1 *315 12,5 AF162 611,00 473 164 1 made from tubing 45 SWEPT BEND (MADE FROM TUBING) PN 10 code 139 d PN ARTNR. EURO Z B QNT. 32 10 AF180 1,92 22 22 250 40 10 AF181 2,52 27 26 150 50 10 AF182 3,81 34 31 75 63 10 AF183 5,90 36 39 40 75 10 AF184 7,05 43 44 25 90 10 AF185 14,20 51 51 15 110 12,5 AF186 24,35 63 61 15 125 12,5 AF187 32,60 71 69 10 *140 12,5 AF188 53,70 80 76 1 160 12,5 AF189 62,75 92 86 1 *200 12,5 AF190 117,00 115 106 1 *250 12,5 AF191 234,00 143 131 1 *315 12,5 AF192 436,00 181 164 1 made from tubing 30 SWEPT BEND (MADE FROM TUBING) PN 12,5 code 139 d ARTNR. EURO Z B QNT. 110 AF170 25,90 79 70 15 made from tubing April 2018 1-11

SOLVENT WELD FITTINGS 90 EQUAL T PN 16 code 100 D PN ARTNR. EURO L Z E QNT. 10 16 AA158 1,39 12 6-250 12 16 AA159 1,39 12 7 18 250 16 16 AA160 1,00 14 9 23 300 20 16 AA161 1,05 16 11 28 400 25 16 AA162 1,11 19 14 34 240 32 16 AA163 1,25 22 17 42 100 40 16 AA164 1,83 26 21 51 80 50 16 AA165 2,52 31 26 61 90 63 16 AA166 5,25 38 33 75 50 75 16 AA167 9,05 44 39 89 32 90 16 AA168 14,70 51 46,5 106 20 110 16 AA169 23,25 61 57,5 129 10 125 16 AA170 43,60 69 67 148 7 140 16 AA171 59,25 76 71 163 4 160 16 AA172 69,95 86 81 190 3 *200 10 AA173 156,00 106 102 232 1 *225 10 AA174 193,00 119 114 258 1 *250 10 AA175 364,00 131 128 286 1 *315 10 AA176 688,00 164 162 360 1 45 T (Y SECTION) PN 16 code 109 ¹ max. operational pressure at 20 C pn 10. d ARTNR. EURO B Z2 Z1 QNT. 10 AA309 4,46 12 4 18 150 12 AA295 4,46 12 4 21 150 16 AA296 5,05 14 5 25 150 20 AA297 5,35 16 6 29,5 150 25 AA298 6,00 16 7,5 35,5 150 32 AA299 7,20 22 9 44,5 100 40 AA300 8,75 26 10 52 75 ¹50 AA301 10,90 31 12 64 32 ¹63 AA302 17,65 38 14 80 30 ¹75 AA303 28,25 44 17 95 18 ¹90 AA304 63,85 51 20 113 6 ¹110 AA305 94,65 61 24 138 8 ¹125 AA307 113,00 69 30 167 6 ¹160 AA306 208,00 86 35 201 3 1-12 April 2018

SOLVENT WELD FITTINGS 90 REDUCING T PN 16 code 103 *Ask for availability D x D ARTNR. EURO L1 L2 Z1 Z2 E1 E2 QNT. 20 x 12 AA179 1,96 17 13 11 12 26 17-20 x 16 AA180 1,32 16 14 11 11 27,5 23 180 25 x 16 AA181 1,34 19 14 14 14 33,5 24 250 25 x 20 AA182 1,40 19 16 14 14 32,5 28 250 32 x 16 AA183 1,65 22 14 17 17 42 23 160 32 x 20 AA184 1,57 22 16 17 17 42 28 130 32 x 25 AA185 1,57 22 19 17 17 42 34 120 40 x 20 AA187 2,08 26 16 21 21 51 28 100 40 x 25 AA188 2,08 26 19 21 21 51 34 90 40 x 32 AA189 1,91 26 22 21 21 51 42 90 50 x 20 AA190 3,07 31 16 26 26 61 28 110 50 x 25 AA191 3,07 31 19 26 26 61 34 110 50 x 32 AA192 3,07 31 22 26 26 61 42 110 50 x 40 AA193 3,07 31 26 26 26 61 51 100 63 x 25 AA195 5,35 38 19 33 33 75 34 70 63 x 32 AA196 5,35 38 22 33 33 75 42 70 63 x 40 AA197 5,65 38 26 33 33 75 51 60 63 x 50 AA198 5,65 38 31 33 33 75 61 60 75 x 40 AA200 10,55 44 26 39 39 89 51 32 75 x 50 AA201 9,95 44 31 39 39 89 61 32 75 x 63 AA202 10,15 44 38 39 39 89 75 32 90 x 40 AA203 15,25 51 26 46,5 47 106 51 24 90 x 50 AA204 15,25 51 31 46,5 47 106 61 24 90 x 63 AA205 15,25 51 38 46,5 47 106 75 22 90 x 75 AA206 15,25 51 44 46,5 47 106 89 22 110 x 50 AA207 24,85 61 31 56,5 57 129 61 12 110 x 63 AA208 24,85 61 38 56,5 57 129 75 12 110 x 75 AA209 24,85 61 44 56,5 57 129 89 12 110 x 90 AA210 24,85 61 51 56,5 57 129 106 10 125 x 75 AA212 57,80 69 44 67 67 145,5 89 8 125 x 90 AA213 49,20 69 51 67 67 145,5 106 8 *125 x 110 AA214 49,20 69 61 67 67 145,5 129 1 *160 x 90 AA221 83,30 86 51 56,5 81 188 106 1 160 x 110 AA219 78,75 86 61 56,5 81 188 129 4 *160 x 125 AA220 83,30 86 69 82 82 184 148 1 *160 x 140 AA222 83,30 86 76 82 82 184 163 1 April 2018 1-13

SOLVENT WELD FITTINGS Y-ELBOW PN10 code 109 d ARTNR. EURO Z1 Z2 B QNT. 50 AA270 7,40 12 31 31 70 63 AA271 9,65 15 37 38 35 Y-BEND PN 10 code 109 d ARTNR. EURO Z1 Z2 B QNT. 50 AA278 9,10 3 62 31 55 63 AA279 11,10 3 77 38 25 90 CROSS SECTION PN 16 code 109 ¹max. operational pressure at 20 C pn 10. d1 ARTNR. EURO B Z QNT. 10 AA316 2,81 12 6,5 150 12 AA317 2,81 12 7,5 150 16 AA318 3,12 14 9,5 150 20 AA319 3,11 16 11 125 25 AA320 6,40 19 13,5 250 32 AA321 7,00 22 17 20 40 AA322 10,05 26 21 30 50 AA323 10,95 31 26 32 63 AA324 14,65 38 22 16 ¹75 AA325 28,30 44 38 28 ¹90 AA326 54,65 51 46 18 ¹110 AA327 85,10 61 56 10 PVC MANIFOLD code 109 With 6 connections: 3x A, 3x B/C. Comes with 2 spigot end caps. TYPE ARTNR. EURO A B C Manifold Ø50mm AA394 19,35 50 50 40 Manifold Ø63mm AA395 29,90 63 63 50 3-WAY MANIFOLD 50MM code 109 Inlet: 50/63mm, outlet: 3 x 40/50mm. TYPE ART. NR. EURO A B C D E F G H Manifold AA392 21,30 50 40 63 26,5 31 135 405 137 Spigot 50mm AA393 1,78 50 37 6 31 - - - - 1-14 April 2018

SOLVENT WELD FITTINGS REDUCER PN 16 code 109 D X D ARTNR. EURO L1 L2 Z TYPE QNT. 16 x 12 AA349 0,78 14 12 2 A 250 20 x 10 AA347 0,78 16 12 4 A 250 20 x 12 AA348 0,78 16 12 4 A 250 20 x 16 AA350 0,74 16 14 2 A 1000 25 x 12 AA346 1,15 19 12 7 B 250 25 x 16 AA351 0,78 19 14 5 B 700 25 x 20 AA352 0,74 19 16 3 A 700 32 x 16 AA353 0,86 22 14 8 B 450 32 x 20 AA354 0,86 22 16 6 B 200 32 x 25 AA355 0,86 22 19 3 A 450 40 x 20 AA356 1,07 26 16 10 B 300 40 x 25 AA357 1,07 26 19 7 B 300 40 x 32 AA358 0,93 26 22 4 A 300 50 x 25 AA359 1,32 31 19 12 B 350 50 x 32 AA360 1,32 31 22 9 B 350 50 x 40 AA361 1,14 31 26 5 A 350 63 x 32 AA362 1,91 38 22 16 B 180 63 x 40 AA363 1,91 38 26 12 B 180 63 x 50 AA364 1,78 38 31 7 A 180 75 x 40 AA365 3,08 44 26 18 B 110 75 x 50 AA366 3,08 44 31 13 B 110 75 x 63 AA367 2,89 44 38 6 A 28 90 x 50 AA368 5,35 51 31 20 B 65 90 x 63 AA369 5,35 51 38 13 B 65 90 x 75 AA370 5,35 51 44 7 A 36 110 x 63 AA371 8,75 61 38 23 B 40 110 x 75 AA372 8,75 61 44 17 B 40 110 x 90 AA373 8,75 61 51 10 A 16 125 x 75 AA374 15,35 69 44 25 B 50 125 x 90 AA375 15,35 69 51 18 B 50 125 x 110 AA376 15,35 69 61 8 A 24 *140 x 90 AA377 23,45 76 51 25 B 1 140 x 110 AA378 23,45 76 61 15 B 40 140 x 125 AA379 23,45 76 69 7 A 40 160 X 90 AA384 27,25 86 61 25 B 24 160 x 110 AA380 26,15 86 61 25 B 24 160 x 125 AA381 26,15 86 69 17 B 24 160 x 140 AA382 26,15 86 76 10 A 24 200 x 160 AA383 47,85 96 86 10 A 12 *250 x 160 AA387 163,00 132 87 45 B 1 250 x 200 AA388 120,00 132 97 35 A 1 April 2018 1-15

SOLVENT WELD FITTINGS END CAP PN 16 code 103 D ARTNR. EURO L H E QNT. 10 AA228 1,07 12 - - 250 12 AA229 1,07 12 - - 250 16 AA230 0,78 16 22 23 1000 20 AA231 0,84 16 30 27 600 25 AA232 0,96 19 31 33 350 32 AA233 1,11 23 36 41 450 40 AA234 1,34 27 43 51 300 50 AA235 1,80 33 49 61 180 63 AA236 2,83 38 57 75 100 75 AA237 6,25 45 67 88 60 90 AA238 8,05 52 81 105 65 110 AA239 14,10 63 97 128 40 125 AA240 21,90 69 99 145 33 140 AA241 32,55 77 107 161 1 160 AA242 39,85 87 126 182 14 200 AA243 66,95 106 166 231 1 PLAIN/PLAIN UNION WITH O-RING PN 16 code 106 D PN ARTNR. EURO L Z1 Z2 F QNT. 10 16 AA248 3,55 12 - - 23 200 12 16 AA249 3,70 12 - - 23 200 16 16 AA250 2,78 14 3 10 ¾" 300 20 16 AA251 2,99 16 3 10 1" 150 25 16 AA252 3,93 19 3 10 1¼" 200 32 16 AA253 4,78 22 3 10 1½" 120 40 16 AA254 5,85 26 3 12 2" 80 50 16 AA255 6,65 31 3 14 2¼" 120 63 16 AA256 10,45 38 3 18 2¾" 60 75 16 AA257 29,80 44 3 18 3½" 30 90 16 AA258 36,50 51 5 18 4" 25 110 16 AA259 48,50 61 5 18 5" 15 PVC UNION PLAIN / SPIGOT PN15 code 106 TYPE ARTNR. EURO BOX 20/25 x 20 mm AA260 4,28 150 25/32 x 25 mm AA261 4,72 200 32/40 x 32 mm AA262 5,35 120 40/50 x 40 mm AA263 7,05 80 50/63 x 50 mm AA264 8,20 60 63/75 x 63 mm AA265 11,40 30 1-16 April 2018

SOLVENT WELD FITTINGS HOSE TAIL PN 16 code 109 D ARTNR. EURO L H D1 D2 QNT. 10 AA459 1,55 12 36 10 12 100 12 AA460 1,31 12 48 12 14 100 16 AA461 1,14 14 60 16 18 550 20 AA462 1,27 16 67 20 22 300 25 AA463 1,52 19 74 25 27 150 32 AA464 1,78 22 80 32 34 250 40 AA465 2,36 26 92 40 42 140 50 AA466 3,42 31 101 50 52 90 63 AA467 5,25 38 111 60 64 60 HOSETAIL PN 16 code 155 Hose tail Ø50mm solvent weld connection x 38mm hosetail. SIZE ARTNR. EURO Ø50mm x 38mm 02207 2,43 END PART PN 10 code 145 d1 ARTNR. EURO d2 d3 QNT. 32 AG301 1,45 40 1" 500 32 AG302 1,90 40 1 ¼" 300 40 AG303 2,23 50 1 ¼" 250 PP TABLE DUCT code 145 SIZE ARTNR. EURO QNT. 32 mm AG306 3,11 175 PLAIN/PLAIN UNION PN 16 code 145 d1 PN ARTNR. EURO d2 d3 QNT. 25 16 AG270 3,51 32 1" 250 32 16 AG271 3,60 40 1¼" 200 40 16 AG272 5,40 50 1½" 100 50 16 AG273 8,55 -- 2" 100 63 10 AG274 16,10 75 2½" 50 75 10 AG275 26,55 90 3" 24 2/3 ADAPTER UNION PN 16 code 145 d1 PN ARTNR. EURO d2 QNT. 32 10 AG281 3,11 1" 100 32 16 AG282 3,11 1 ¼" 250 40 10 AG283 4,21 1 ¼" 100 40 16 AG284 4,21 1 ½" 200 50 10 AG285 5,60 1 ½" 100 50 16 AG286 5,60 2" 100 63 10 AG279 11,50 2" 50 63 10 AG287 11,05 2 ½" 50 April 2018 1-17

SOLVENT WELD FITTINGS TANKCONNECTOR code 109 d1/d2 X d1 ARTNR. EURO d3 QNT. 16 x 16 AA520 15,15 ½" 50 20/25 x 20 AA521 14,05 ¾" 50 25/32 x 25 AA522 15,10 1" 50 32/40 x 32 AA523 16,70 1¼" 50 40/50 x 40 AA524 20,00 1¾" 50 50/63 x 50 AA525 23,25 2" 45 50/63 x 50 AA526 23,25 2¼" 45 63/75 x 63 AA527 44,30 2½" 24 75/90 x 75 AA528 52,95 3" 21 90/110 x 90 AA529 72,70 M 113 10 110/125 x 110 AA530 88,35 M 133 10 AA520 VDL TANKCONNECTOR WITH FLAT EXHAUST code 109 Transit with flat exhaust of 5-6mm with the use of 5mm holes. SIZE (d1) ARTNR. EURO d3 Z1 C Z2 QNT. 16 AA540 13,20 ¾" 11 5 0-28 50 20 AA541 14,20 1" 12 5 0-28 50 25 AA542 15,90 1¼" 13 5 0-28 75 32 AA543 19,05 1½" 13 5 0-28 50 40 AA544 21,25 2" 13 6 0-29 45 50 AA545 41,70 2¼" 15 6 0-30 45 63 AA546 50,25 2¾" 15 6 0-35 20 TABLE DUCT WITH CLAMPING NUT PN 10 code 145 d1 ARTNR. EURO d3 QNT. 20 clamp AG318 7,20 ¾" 100 25 clamp AG314 7,70 1" 100 32 clamp AG315 7,85 1¼" 100 40 clamp AG316 8,65 1¾" 80 50 clamp AG319 17,55 2 45 63 clamp AG317 19,70 2½" 15 CONNECTION WITH CLAMPING NUT / RECOVERY CONNECTION PN 10 code 145 SIZE ARTNR. EURO d1 d2 d3 QNT. 40/50 x 32 clamp AG310 3,21 50 40 32 200 50/63 x 40 clamp AG311 5,70 63 50 40 100 63/75 x 50 clamp AG312 8,30 75 63 50 50 1-18 April 2018

SOLVENT WELD FITTINGS TRANSITION ADAPTER UNION STRAIGHT PVC - PE PN 10 code 145 d2/d3 x d1 PVC PE ARTNR. EURO QNT. 25/32 x 16 AG340 2,01 200 25/32 x 20 AG341 2,01 200 25/32 x 25 AG342 2,06 200 32/40 x 32 AG343 3,01 150 40/50 x 40 AG344 4,78 100 TRANSITION ELBOW PVC - PE PN 10 code 145 d2 x d1 PVC PE ARTNR. EURO QNT. 32 x 16 AG350 2,44 200 32 x 20 AG351 2,44 200 32 x 25 AG352 2,81 200 TRANSITION T PE X PVC X PE PN 7,5 code 145 d2 x d1 PE x PVC x PE ARTNR. EURO QNT. 25 x 32 x 25 AG359 3,66 120 BLANK FLANGE PN 16 code 109 For rubber washer see page 32/33. Watch the stitch size in column I from size 200mm and up!! D ARTNR. EURO DN E S I f Holes QNT. *20 AA440 4,34 15 95 11 65 14 4 10 *25 AA441 4,99 20 105 12 75 14 4 10 *32 AA442 6,05 25 115 14 85 14 4 10 *40 AA443 7,75 32 140 15 100 18 4 1 50 AA444 8,90 40 150 16 110 18 4 1 63 AA445 11,30 50 165 18 125 18 4 50 75 AA446 13,50 65 185 19 145 18 4 40 90 AA447 16,40 80 200 20 160 18 8 1 110 AA448 20,50 100 220 22 180 18 8 1 125 AA449 26,75 110 230 24 190 22 8 1 140 AA450 35,80 125 250 26 210 22 8 1 160 AA451 38,50 150 285 28 240 22 8 28 *200 AA452 89,85 200 315 36 270 22 8 1 *200/225 AA453 95,90 225 340 36 295 22 8 1 *250 AA454 120,00 250 370 36 325 22 8 1 *250/280 AA455 140,00 280 395 36 350 22 12 1 *315 AA456 166,00 315 445 36 400 22 12 1 April 2018 1-19

SOLVENT WELD FITTINGS FLANGE ADAPTER PN 16 code 109 For rubber washer see page 32/33. D ARTNR. EURO DN L Z d S E QNT. 20 AA400 1,18 15 16 3 27 6 34 10 25 AA401 1,18 20 19 3 33 7 41 10 32 AA402 1,30 25 22 3 41 7 50 10 40 AA403 1,86 32 26 3 50 8 61 10 50 AA404 2,83 40 31 3 61 8 73 180 63 AA405 3,93 50 38 3 76 9 90 90 75 AA406 5,35 65 44 3 90 10 106 120 90 AA407 7,05 80 51 5 107 11 125 70 110 AA408 9,60 100 61 5 131 12 150 45 125 AA409 16,70 110 74 5 146 12 168 25 140 AA410 18,95 125 78 4 163 13 188 20 160 AA411 23,00 150 85,5 6 185 13 213 17 200 AA412 48,05 200 106 6,5 232 18 254 6 225 AA413 52,65 200 119 7 248 19 274 4 250 AA414 72,55 225 131 9 279 20 308 1 *315 AA415 132,00 300 165 16 346 32 377 1 BACKING FLANGE PN 16 code 109 For rubber washer see page 32/33. D ARTNR. EURO DN d E S I holes QNT. 20 AA420 3,51 15 28 95 11 65 4 10 25 AA421 3,89 20 34 105 12 75 4 10 32 AA422 4,60 25 42 115 14 85 4 10 40 AA423 5,35 32 51 140 15 100 4 10 50 AA424 6,60 40 62 150 16 110 4 80 63 AA425 7,05 50 78 165 18 125 4 50 75 AA426 7,95 65 92 185 19 145 4 40 90 AA427 9,20 80 110 200 20 160 8 30 110 AA428 11,25 100 133 220 22 180 8 24 125 AA429 15,55 110 149 230 24 190 8 20 140 AA431 17,55 125 167 250 26 210 8 15 160 AA432 20,10 150 190 285 28 240 8 28 200 AA433 51,00 200 235 340 30 295 8 1 *225 AA434 55,65 200 250 340 30 295 8 1 *250 AA435 106,00 250 285 390 35 350 8 1 *315 AA436 132,00 300 349 465 40 400 12 1 1-20 April 2018

PLAIN / THREADED CONNECTION PLAIN / THREADED CONNECTION 90 ELBOW PLAIN X FEMALE THREAD PN 16 code 118 D X G ARTNR. EURO L1 L2 Z1 Z2 E QNT. 16 x 3/8" AB220 1,71 14 11,4 9 11,6 23 10 20 x ½" AB221 1,75 16 15 11 12 28 250 25 x ¾" AB222 1,95 19 16,3 14 16,7 34 350 32 x 1" AB223 2,50 22 19,1 17 19,9 42 200 40 x 1¼" AB224 4,10 26 21,4 21 25,6 51 120 50 x 1½" AB225 5,70 31 21,4 26 35,6 61 140 63 x 2" AB226 8,45 38 25,7 33 45,3 75 70 75 x 2½" AB227 16,60 44 30,2 39 52,8 89 40 90 x 3" AB228 23,40 51 33,3 47 64,7 106 25 110 x 4" AB229 35,45 61 39,3 57 78,7 129 1 90 ELBOW PLAIN X FEMALE THREAD WITH SS REINFORCEMENT PN 16 code 118 D X G ARTNR. EURO L1 L2 Z1 Z2 E 20 x ½" AB301 3,21 16 15 11 12 21 25 x ¾" AB302 3,93 19 16,3 14 16,7 34 32 x 1" AB303 4,86 22 19,1 17 19,9 42 90 ELBOW PLAIN X MALE THREAD PN 10 code 145 d1 X d2 ARTNR. EURO Z1 B C QNT. 32 x ¾" AG200 1,68 21 22 19 250 32 x 1" AG201 1,68 21 22 19 250 32 x 1¼" AG202 1,45 17 22 21 250 40 x 1¼" AG203 1,93 22 26 21 200 40 x 1½" AG204 2,28 22 26 21 175 50 x 1¼" AG205 2,72 28 31 21 150 50 x 1½" AG206 3,01 28 31 21 80 50 x 2" AG207 3,01 28 31 26 100 90 T PLAIN X FEMALE THREAD X PLAIN PN 16 code 118 D X G X D ARTNR. EURO L1 L2 Z1 Z2 E QNT. 20 x ½" x 20 AB201 2,02 16 15 11 12 28 400 25 x ¾" x 25 AB202 2,38 19 16,3 14 16,7 34 240 32 x 1" x 32 AB203 2,89 22 19,1 17 19,9 42 100 40 x 1¼" x 40 AB204 4,50 26 21,4 21 25,6 51 80 50 x 1½" x 50 AB205 5,55 31 21,4 26 35,6 61 90 63 x 2" x 63 AB206 10,10 38 25,7 33 45,3 75 50 April 2018 1-21

PLAIN / THREADED CONNECTION 90 T PLAIN X FEMALE THREAD X PLAIN PN 16 WITH SS REINFORCEMENT code 118 D X G ARTNR. EURO L1 L2 Z1 Z2 E 20 x ½" AB321 4,40 16 15 11 12 28 25 x ¾" AB322 5,35 19 16,3 14 16,7 34 90 T PLAIN X MALE THREAD X PLAIN PN 10 code 145 d1 X d2 ARTNR. EURO B C QNT. 32 x 1¼" AG170 1,42 22 19 225 40 x 1¼" AG171 2,34 26 21 140 50 x 1¼" AG172 2,94 31 21 90 50 x 1½" AG173 3,30 31 21 90 63 x 1" AG174 6,50 38 19 50 3/3 UNION PLAIN X FEMALE THREAD PN 16 code 118 D X G ARTNR. EURO L1 L2 Z1 Z2 E QNT. 12 x ¼" AB239 4,21 12 12 - - - 100 16 x 3/8" AB240 3,59 14 11,4 3 13,6 34 300 20 x ½" AB241 4,40 16 15 3 11 42 150 25 x ¾" AB242 5,05 19 16,3 3 12,7 52 200 32 x 1" AB243 7,05 22 19,1 3 12,9 59 120 40 x 1¼" AB244 8,15 26 21,4 3 16,6 72 80 50 x 1½" AB245 11,75 31 21,4 3 23,6 79 60 63 x 2" AB246 14,70 38 25,7 3 30,3 96 30 75 x 2½" AB247 41,85 44 30,8 3 31,8 119 30 90 x 3" AB248 46,35 51 33,3 5 35,7 134 1 3/3 UNION PLAIN X BRASS MALE THREADED code 118 d1 X d2 ARTNR. EURO QNT. 50 x 1½" AB261 54,15 60 63 x 2" AB262 56,55 30 1-22 April 2018

PLAIN / THREADED CONNECTION 3/3 UNION PLAIN X MALE THREAD WITH O-RING code 145 3/3 union male threaded with O-ring for easy sealing. TYPE ARTNR. EURO 32mm x 1 AG333 8,05 40mm x 1¼ AG334 10,30 3/3 UNION PLAIN X MALE THREAD WITH O-RING code 145 3/3 union male threaded with O-ring for easy sealing. Maximum operational pressure PN 6. Ideal for ponds & swimming pools.. AB266 is delivered with 2 adapters: 50 & 63 mm. TYPE ARTNR. EURO 1½ male thr. x Ø50mm AB265 13,85 2 male thr. x Ø50 & 63mm (set of 2) AB266 18,75 Ø50mm & Ø63mm 3/3 UNION PLAIN SOCKET X MALE THREAD PN 16 code 145 ¹ = operational pressure at 20º C max. pn 10. d1 X d2 ARTNR. EURO QNT. 12 x ¼" AG330 3,06 100 16 x 3/8" AG331 3,39 100 20 x ½" AG320 3,86 125 25 x ¾" AG321 4,87 75 32 x 1" AG322 5,95 100 40 x 1¼" AG323 7,10 100 50 x 1½" AG324 7,55 60 63 x 2" AG326 11,90 30 ¹ 75 x 2½" AG327 32,00 25 ¹ 90 x 3" AG328 46,05 15 ¹ 110 x 4" AG329 58,75 10 FLEXFIT FITTINGS code 145 The special Flexfit union has a solvent PVC spigot-end to use in PVC solvent fittings to a clamp fitting for Spa flex solvent weld hose (see page 2-1). TYPE ART.NR EURO Flexfit 50mm clamp x PVC 50mm spigot AG380 7,70 Flexfit 63mm clamp x PVC 63mm spigot AG382 12,00 April 2018 1-23

PLAIN / THREADED CONNECTION MALE THREADED / PLAIN SOCKET NIPPLE PN 16 code 115 D X D X G ARTNR. EURO L1 L2 L3 H O QNT. 10 x 16 x ¼" AB095 1,02 12 12 12 30 19 250 12 x 16 x ¼" AB096 1,02 12 12 12 30 19 250 12 x 16 x 3/8" AB099 0,86 12 14 11,4 36 22 1000 16 x ¼" AB100 1,07-14 12 31 27 250 16 x 20 x 3/8" AB101 0,78 14 16 11,4 40 24 500 16 x 20 x ½" AB102 0,78 14 16 15 43 24 450 20 x 25 x 3/8" AB103 0,84 16 19 11,4 43 30 300 20 x 25 x ½" AB104 0,84 16 19 15 46 30 300 20 x 25 x ¾" AB105 0,84 16 19 16,3 47 30 300 25 x 32 x ½" AB106 0,89 19 22 15 49 36 400 25 x 32 x ¾" AB107 0,89 19 22 16,3 50 36 400 25 x 32 x 1" AB108 0,89 19 22 19,1 53 36 350 32 x 40 x ½" AB097 0,93 22 22 19 49 46 300 32 x 40 x ¾" AB109 0,93 22 26 16,3 54 46 330 32 x 40 x 1" AB110 0,93 22 26 19,1 57 46 300 32 x 40 x 1¼" AB111 1,07 22 26 21,4 60 46 240 40 x 50 x 1" AB112 1,40 26 31 19,1 64 55 160 40 x 50 x 1¼" AB113 1,32 26 31 21,4 67 55 150 40 x 50 x 1½" AB114 1,42 26 31 21,4 67 55 140 50 x 63 x 1" AB098 2,81 31 31 21 63 65 150 50 x 63 x 1¼" AB115 2,30 31 38 21,4 74 65 120 50 x 63 x 1½" AB116 2,30 31 38 21,4 74 65 120 50 x 63 x 2" AB117 2,30 31 38 25,7 78 65 90 63 x 75 x 1½" AB118 3,75 38 44 21,4 80 80 90 63 x 75 x 2" AB119 3,75 38 44 25,7 84 80 90 63 x 75 x 2½" AB120 4,71 38 44 30,2 91 80 90 75 x 90 x 2" AB121 7,40 44 52 25,7 94 95 45 75 x 90 x 2½" AB122 8,30 44 52 30,2 99 95 45 75 x 90 x 3" AB123 8,65 44 52 33,3 102 95 60 90 x 110 x 2½" AB124 11,55 51 61 30,2 110 115 45 90 x 110 x 3" AB125 11,55 51 61 33,3 113 115 45 90 x 110 x 4" AB126 13,20 51 61 39,3 118 115 36 110 x 125 x 3" AB127 16,80 61 66 33,3 115 130 36 110 x 125 x 4" AB128 16,80 61 66 39,3 120 130 30 1-24 April 2018

PLAIN / THREADED CONNECTION MALE THREADED / PLAIN SOCKET NIPPLE (MADE FROM TUBING) PN 16 code 136 d1/d2 X d3 PN ARTNR. EURO C D QNT. 25 x ½" 16 AF100 1,65-13 300 25 x ¾" 16 AF101 1,65-13 300 25/32 x 1" 16 AF133 1,75 22 19 300 32 x ½" 10 AF102 1,75-19 400 32 x ¾" 16 AF103 1,93-13 400 32 x 1" 16 AF104 1,93-15 300 32/40 x 1¼" 16 AF134 2,18 26 21 300 40 x 1" 16 AF105 2,33-15 300 40 x 1¼" 16 AF106 2,09-19 300 40 x 1½" 16 AF107 2,09-21 300 50 x 1¼" 16 AF108 2,88-21 200 50 x 1½" 16 AF109 2,93-21 200 50 x 2" 16 AF110 3,06-26 200 63 x 1¼" 10 AF111 4,82-19 150 63 x 1½" 16 AF112 4,82-21 150 63 x 2" 16 AF113 4,82-23 150 63/75 x 2½" 16 AF135 5,30 44 31 115 75 x 2" 16 AF116 7,40-23 100 75 x 2½" 16 AF117 7,65-28 80 75/90 x 3" 16 AF136 10,15 51 34 65 90 x 2½" 16 AF119 12,55-28 55 90 x 3" 16 AF120 13,60-30 50 110 x 4" 16 AF123 21,15-28 27 PVC THREADED PIPE PN 10 code 124 D1 ARTNR. EURO LENGTH QNT ½" AC460 2,67 60mm 320 ¾" AC461 2,89 60mm 240 1" AC462 3,02 80mm 260 1¼ " AC463 4,01 80mm 160 1½" AC464 4,34 80mm 100 2" AC465 4,67 100mm 60 2½" AC466 7,45 120mm 50 3" AC467 8,15 150mm 60 4" AC468 10,15 150mm 30 April 2018 1-25

PLAIN / THREADED CONNECTION FEMALE THREADED / PLAIN SOCKET PN 16 code 115 D X G ARTNR. EURO L1 L2 Z E QNT. 10/16 x ¼" AB151 1,87 12 10 4 24 100 12 x ¼" AB152 1,87 12 10 4 24 100 12/16 x 3/8" AB153 1,98 12 10 4 24 100 16 x ¼" AB154 1,87 14 15 3 27 100 16 x 3/8" AB140 1,45 14 11,4 6 23 100 20 x ½" AB141 1,52 16 15 4 28 350 25 x ½" AB135 3,03 19 18 5 36 100 25 x ¾" AB142 1,71 19 16,3 6 34 450 32 x ½" AB136 3,28 22 18 6 46 100 32 x ¾" AB137 3,28 22 18 6 46 100 32 x 1" AB143 2,22 22 19,1 6 42 250 40 x ¾" AB139 4,11 26 16 6 55 150 40 x 1" AB138 4,06 26 23 3 55 100 40 x 1¼" AB144 3,19 26 21,4 8 50,5 180 50 x 1" AB155 5,30 31 22 2 66 50 50 x 1¼" AB156 5,30 31 23 4 66 100 50 x 1½" AB145 4,15 31 21,4 13 61 120 63 x 1½" AB157 7,30 38 25 7 80 50 63 x 2" AB146 5,75 38 25,7 15 75 75 75 x 2½" AB147 14,90 44 30,2 8 88,5 45 90 x 3" AB148 17,60 51 33,3 9 106 54 110 x 4" AB150 25,65 61 39,3 10 129 30 FEMALE THREADED / PLAIN SOCKET WITH SS REINFORCEMENT PN 16 code 118 D X G ARTNR. EURO L1 L2 Z E 20 x ½" AB311 3,07 16 15 4 28 25 x ¾" AB312 3,35 19 16,3 6 34 32 x 1" AB313 3,99 22 19,1 6 42 40 x 1¼" AB314 4,64 26 21,4 8 51 50 x 1½" AB315 6,20 31 21,4 13 61 63 x 2" AB316 7,75 38 25,7 15 75 75 x 2½" AB317 19,35 44 33 3 94 90 x 3" AB318 25,15 51 36 3 114 TRANSPARENT REDUCER RING 50/63 x 1 ½" FEMALE THREAD code 118 Ideal fitting for swimming pool and pond applications. Has a 50/63mm glue connection and 1½" female threaded side. Ideal use for UV-C units to see if the lamp is working. SIZE ARTNR. EURO 1½ fem.thr. 50mm 63mm 50/63 x 1½ fem.thr. AB270 8,25 1-26 April 2018

PLAIN / THREADED CONNECTION FEMALE ADAPTOR BUSH (SPIGOT X FEMALE THREAD) PN 16 code 118 SIZE ARTNR. EURO TYPE QNT. 16 x ¼" AB347 1,61 A 250 20 x ¼" AB348 1,61 A 250 20 x 3/8" AB349 1,61 A 250 25 x 3/8" AB346 2,03 A 250 25 x ½" AB345 2,03 A 250 25 x ½" AB350 1,30 B 1000 32 x ½" AB351 2,29 A 250 32 x ¾" AB344 2,29 A 250 32 x ¾" AB352 1,52 B 550 40 x ½" AB353 2,93 A 200 40 x ¾" AB354 2,93 A 100 40 x 1" AB355 1,99 B 300 50 x 1" AB357 3,87 A 100 50 x 1¼" AB358 2,34 B 350 63 x 1½" AB361 3,53 B 180 75 x 2" AB364 6,50 B 110 90 x 2½" AB367 9,30 B 65 110 x 3" AB371 14,35 B 40 EXTENSION ADAPTOR BUSH FEMALE THREAD (SPIGOT X FEMALE THREAD) PN 16 code 118 D X G ARTNR. EURO L1 L2 E Z QNT. 16 x 3/8" AB160 1,83 14 11,4 23 22 600 20 x ½" AB162 2,18 16 15 28 24 350 20 x ¾" AB163 2,22 16 16,3 34 24 300 25 x ½" AB164 2,30 19 15 28 27 500 25 x ¾" AB165 2,34 19 16,3 34 27 450 25 x 1" AB166 2,34 19 19,1 42 39 400 32 x ¾" AB167 2,52 22 16,3 34 30 250 32 x 1" AB168 2,72 22 19,1 42 30 250 40 x 1" AB169 3,06 26 19,1 42 36 200 40 x 1¼" AB170 3,34 26 21,4 51 36 180 50 x 1¼" AB171 3,69 31 21,4 55 41 140 50 x 1½" AB172 3,69 31 21,4 58 41 130 50 x 2" AB173 5,65 31 25,7 72 41 110 63 x 2" AB174 6,65 38 25,7 72 48 70 75 x 2" AB175 8,75 44 25,7 72 53 60 75 x 2½" AB176 11,30 44 30,2 89 58 80 75 x 3" AB177 12,70 44 33,3 103 58 35 90 x 2½" AB178 13,20 51 30,2 89 65 60 90 x 3" AB179 15,45 51 33,3 103 65 1 110 x 3" AB181 19,05 61 33,3 103 76 1 110 x 4" AB182 21,90 61 39,3 130 76 1 April 2018 1-27

THREADED CONNECTION SOCKET 2 X FEMALE THREADED PN 16 code 124 THREADED CONNECTION G ARTNR. EURO L Z E QNT. ¼" AC099 2,03 10 6 24 100 3/8" AC100 1,48 11,4 6 23 450 ½" AC101 1,65 15 7 26,5 350 ¾" AC102 2,02 16,3 7 33 450 1" AC103 2,18 19,1 8 41 250 1¼" AC104 3,29 21,4 8 50 190 1½" AC105 4,53 21,4 8 60,5 160 2" AC106 6,40 25,7 8 75 85 2½" AC107 15,35 30,2 9 88 80 3" AC108 18,30 33,3 10 106 60 a REDUCING SOCKET 2 X FEMALE THREADED PN 16 code 124 G X G ARTNR. EURO L1 L2 Z QNT. 3/8" x ¼" AC159 2,03 14 10 4 100 ½" x 3/8" AC160 2,55 15 11,4 6 450 ¾" x ½" AC161 2,59 16,3 15 7 450 1" x ¾" AC162 2,87 19,1 16,3 7 300 1¼" x 1" AC163 3,51 21,4 19,1 8 200 1½" x 1¼" AC164 5,35 21,4 21,4 8 160 2" x 1½" AC165 7,60 25,7 21,4 8 100 2½" x 2" AC166 16,60 30,2 25,7 8 50 3" x 2½" AC167 19,20 33,3 30,2 9 50 90 ELBOW 2 X FEMALE THREADED PN 16 code 124 G ARTNR. EURO L Z E QNT. 3/8" AC120 1,27 11,4 11,6 23,5 350 ½" AC121 1,32 15 12 27,5 250 ¾" AC122 1,83 16,3 16,7 33,5 350 1" AC123 1,99 19,1 19,9 42 200 1¼" AC124 3,32 21,4 25,6 51 120 1½" AC125 4,60 21,4 35,6 62 140 2" AC126 6,55 25,7 45,3 77 70 3" AC128 24,15 33,3 64,7 106 25 45 ELBOW 2 X FEMALE THREADED PN 16 code 124 G ARTNR. EURO L Z E QNT. ½" AC141 3,02 15 12 27,5 300 ¾" AC142 3,19 16,3 16,7 33,5 400 1" AC143 4,15 19,1 19,9 42 200 1¼" AC144 6,40 21,4 25,6 51 150 1½" AC145 8,05 21,4 35,6 62 170 2" AC146 15,05 25,7 45,3 77 90 1-28 April 2018

THREADED CONNECTION DOUBLE NIPPLE 2 X MALE THREADED PN 16 code 124 G ARTNR. EURO L H O QNT. ¼" AC179 1,23 12 32 19 100 3/8" AC180 1,05 11,4 33 22 1000 ½" AC181 1,11 15 42 24 450 ¾" AC182 1,30 16,3 44 30 650 1" AC183 1,57 19,1 50 36 350 1¼ " AC184 2,02 21,4 58 46 220 1½" AC185 2,61 21,4 58 50 200 2" AC186 3,53 25,7 66 65 200 2½" AC187 9,60 30,2 78 80 110 3" AC188 13,20 33,3 85 95 70 4" AC189 21,65 39,3 96 120 35 REDUCING NIPPLE 2 X MALE THREADED PN 16 code 124 G X G ARTNR. EURO L1 L2 H O QNT. ½" x 3/8" AC200 1,57 15 11,4 38 24 650 ¾" x ½" AC201 1,78 16,3 15 43 30 350 1" x ¾" AC202 2,18 19,1 16,3 47 36 500 1¼ " x 1" AC203 2,85 21,4 19,1 56 46 270 1½" x 1¼ " AC204 3,55 21,4 21,4 58 50 180 2" x 1½" AC205 5,10 25,7 21,4 62 65 110 2½" x 2" AC206 10,85 30,2 25,7 73 80 80 *3" x 2½" AC207 12,60 33,3 30,2 82 95 1 *4" x 3" AC208 19,20 39,3 33,3 90 120 1 90 T 3 X FEMALE THREADED PN 16 code 124 G ARTNR. EURO L H E QNT. 3/8" AC220 2,27 11,4 11,6 23,5 300 ½" AC221 2,55 15 12 27,5 400 ¾" AC222 2,84 16,3 16,7 33,5 240 1" AC223 3,79 19,1 19,9 42 100 1¼ " AC224 4,50 21,4 25,6 51 70 1½" AC225 5,80 21,4 35,6 62 90 2" AC226 8,85 25,7 45,3 77 50 *2½" AC227 22,10 30,2 52,8 89 1 3" AC228 25,55 33,3 64,7 106 1 END CAP FEMALE THREADED PN 10 WITH RUBBER RING code 124 G ARTNR. EURO B QNT. 3/8" AC240 0,86 13 250 ½" AC241 0,86 14 500 ¾" AC242 0,91 16 400 1" AC243 0,91 17 500 1¼ " AC244 1,29 19 500 1½" AC245 2,31 23 300 2" AC246 4,28 24 150 2½" AC247 10,45 29 100 3" AC248 15,35 31 50 4" AC249 23,75 34 10 April 2018 1-29

THREADED CONNECTION PLUG MALE THREADED PN 16 code 124 G ARTNR. EURO L H E QNT. ¼" AC259 1,23 12 17 100 3/8" AC260 0,98 11,4 24 22 1200 ½" AC261 1,05 15 29 24 650 ¾" AC262 1,27 16,3 30 30 400 1" AC263 1,40 19,1 33 36 500 1¼ " AC264 2,02 21,4 39 46 350 1½" AC265 2,30 21,4 39 50 280 2" AC266 3,19 25,7 43 65 160 2½" AC267 10,95 30,2 51 80 80 3" AC268 12,55 33,3 55 95 50 4" AC269 21,25 39,3 61 120 36 3/3 ADAPTOR UNION 2 X FEMALE THREADED + 0-RING PN 16 code 124 G ARTNR. EURO L F E QNT. ½" AC441 4,97 15 1" 42 150 ¾" AC442 5,35 16,3 1¼ " 52 200 1" AC443 7,15 19,1 1½" 59 120 1¼ " AC444 8,55 21,4 2" 72 80 1½" AC445 12,25 21,4 2¼ " 79 60 2" AC446 16,05 25,7 2¾" 96 30 2½" AC447 44,00 30,2 3½" 119 1 3" AC448 50,55 33,3 4" 134 1 REDUCER MALE THREADED X FEMALE THREADED PN 16 code 124 G x G ARTNR. EURO L1 L2 Z O QNT. ½" x ¼ " AC279 1,32 - - - - - ¾" x ½" AC280 1,32 16,3 15 13,3 30 450 1" x ¾" AC281 1,54 19,1 16,3 14,8 36 500 1¼ " x 1" AC282 2,30 21,4 19,1 16,3 46 300 1½" x 1¼ " AC283 3,19 21,4 21,4 14 50 270 2" x 1½" AC284 4,53 25,7 21,4 18,3 65 160 2½" x 2" AC285 8,90 30,2 25,7 20,5 80 90 3" x 2½" AC286 12,30 33,3 30,2 20,1 95 50 4" x 3" AC287 19,95 39,3 33,3 24 120 1 NUT PN 16 code 124 D1 ARTNR. EURO B D2 QNT. ½" AC420 1,86 13 38 700 ¾" AC421 2,13 14 43 700 1" AC422 2,78 16 56 500 1¼ " AC423 3,92 18 65 450 1½" AC424 4,46 19 72 300 2" AC425 6,65 21 94 150 2½" AC426 7,35 23 105 50 3" AC427 8,15 27 125 30 4" AC428 9,40 31 153 20 1-30 April 2018

THREADED CONNECTION SOCKET NIPPLE MALE THREADED X FEMALE THREADED PN 16 code 124 G x G ARTNR. EURO L1 L2 Z E QNT. ½" x 3/8" AC300 1,30 15 11,4 24 23 650 ¾" x 3/8" AC301 1,30 16,3 11,4 25 23 400 ¾" x ½" AC302 1,30 16,3 15 26 28 350 *1" x 3/8" AC303 1,57 19,1 11,4 28 23 500 1" x ½" AC304 1,57 19,1 15 29 28 500 1" x ¾" AC305 1,57 19,1 16,3 30 34 450 1¼ " x ½" AC306 2,34 21,4 15 33 28 300 1¼ " x ¾" AC307 2,34 21,4 16,3 33 34 280 1¼ " x 1" AC308 2,34 21,4 19,1 33 42 260 1½" x ¾" AC309 2,89 21,4 16,3 34 34 220 1½" x 1" AC310 2,89 21,4 19,1 34 42 220 1½" x 1¼" AC311 2,89 21,4 21,4 34 51 180 2" x 1" AC312 3,93 25,7 19,1 37 42 130 2" x 1¼" AC313 3,93 25,7 21,4 37 51 120 2" x 1½" AC314 3,93 25,7 21,4 37 58 120 2½" x 1¼" AC315 9,60 30,2 21,4 43 51 60 2½" x 1½" AC316 9,60 30,2 21,4 43 58 60 2½" x 2" AC317 9,60 30,2 25,7 43 72 60 SOCKET NIPPLE MALE THREADED X FEMALE THREADED PN 16 code 124 G x G ARTNR. EURO L1 L2 Z QNT. *3/8" x ½" AC340 2,15 11,4 15 22 500 ½" x ¾" AC341 2,34 15 16,3 24 250 ¾" x 1" AC342 2,47 16,3 19,1 26 150 1" x 1¼ " AC343 2,89 19,1 21,4 30 220 1¼ " x 1½" AC344 3,06 21,4 21,4 33 150 1½" x 2" AC345 4,27 21,4 25,7 34 140 2" x 2½" AC346 8,75 25,7 30,2 38 72 2½" x 3" AC347 11,60 30,2 33,3 44 50 HOSE TAIL MALE THREADED PN 16 code 124 D ARTNR. EURO H D1 D2 QNT. ¼ " AC380 1,49 53 12 14 100 3/8" AC381 1,30 56 16 18 500 ½" AC382 1,34 66 20 22 300 ¾" AC383 1,69 71,3 25 27 180 1" AC384 1,95 77,1 30 32 250 1¼ " AC385 2,78 87,4 40 42 160 1½" AC386 3,63 91,4 50 52 100 2" AC387 5,95 98,7 60 64 60 HOSE TAIL WITH FEMALE THREADED NUT PN 16 code 124 D3 ARTNR. EURO D1 D2 QNT. ¾" AC400 3,12 16 18 50 1" AC401 3,47 20 22 50 1¼" AC402 3,99 25 27 50 1½ AC403 5,30 30 32 50 2" AC404 8,30 40 42 50 2¼ AC405 12,40 50 52 50 April 2018 1-31

RUBBER RINGS RUBBER RINGS O-RING FOR 3/3 UNION RUBBER (EPDM) code 121 D = INNER DIAMETER S = THICKNESS SIZE ARTNR. EURO D S 16 AB500 0,66 15,5 2,6 20 AB501 0,66 20,2 3,5 25 AB502 0,68 28,2 3,5 32 AB503 0,68 32,9 3,5 40 AB504 0,91 40,6 5,3 50 AB505 1,15 47 5,3 63 AB506 1,88 59,7 5,3 75 AB507 2,35 78,7 5,3 90 AB508 2,68 91,4 5,3 110 AB509 3,87 113,7 5,3 RUBBER WASHER (EPDM) FOR FLANGE ADAPTOR code 121 SIZE ARTNR. EURO d D S TYPE 20 AB540 0,48 18 32 2 A 25 AB541 0,51 22 39 2 A 32 AB542 0,66 28 48 2 A 40 AB543 0,68 35 59 3 A 50 AB544 1,00 45 71 3 A 63 AB545 1,74 60 88 3 A 75 AB546 2,05 70 104 3 A 90 AB547 2,81 85 123 3 A 110 AB548 4,12 105 148 4 A 125 AB549 5,40 120 168 4 A 140 AB550 6,40 135 186 4 A 160 AB551 9,55 155 211 4 A 200 AB552 14,25 190 248 5 B *225 AB553 16,95 215 273 5 B *250 AB554 18,95 238 303 5 B *315 AB556 26,55 300 378 5 B PROFILE WASHER code 121 Rubber ring (EPDM) with profile for better sealing. SIZE EXT. THREAD ARTNR. EURO d D S ½" AB620 0,33 20 30 2 ¾" AB621 0,34 26 36 2 1" AB622 0,36 33 43 2 1-32 April 2018

RUBBER RINGS FLAT WASHER (EPDM) FOR END CAP AND HANDSHAPE ADAPTOR UNIONS code 121 SIZE cap + 3/3 union intern SIZE for ext. thread ARTNR. EURO d D S TYPE 3/8" - AB560 0,25-14 2 A ½" - AB561 0,25-18,5 2 A ¾" - AB562 0,25-24 2 A 1" - AB563 0,31 18,5 30 2 B 1¼" ¾" AB564 0,39 29 39 2 B 1½" 1" AB565 0,51 34 45 3 B 2" 1¼" AB566 0,72 44 57 3 B 2½" 1¾" + 2" AB567 1,19 57 73 4 B 3" 2¼" AB568 2,03 67 85 4 B - 2½" AB569 3,07 77 95 4 B 4" 3" AB570 3,72 88 110 5 B - M113 AB571 4,87 115 135 5 B RUBBER WASHER (EPDM) FOR HOSE TAIL FEMALE THREADED code 121 SIZE THREAD ARTNR. EURO d D S SIZE HOSETAIL ¾" AB600 0,37 11 23 2 16 1" AB601 0,41 15 29 2 20 1¼" AB602 0,48 19 37 2 25 1½" AB603 0,51 24 43 3 32 2" AB604 0,61 32 55 3 40 2¼" AB605 0,98 40 61 3 50 2¾" AB606 1,29 50 77 3 63 PP SLIPRING FOR VDL TANK CONNECTOR code 121 SIZE ARTNR. EURO d D S ¾" AB580 1,23 29 39 3 1" AB581 1,29 34 48 3 1¼" AB582 1,39 42 58 3 1½" AB583 1,55 48 65 3 1¾" AB584 1,61 55 72 4 2" AB585 1,91 61 79 4 2¼" AB586 2,05 67 86 4 2½" AB587 3,77 77 94 4 3" AB588 4,44 90 112 5 M113 + 4" AB589 5,25 115 140 5 April 2018 1-33

ARMATURES ARMATURES BALL VALVE PLAIN SINGLE UNION code 127 ARMARURES O-ring EPDM 70 sh, ball assembly: PTFE (Teflon), operational pressure: 20-63 mm: 16 bar at 20 C, 75-110 mm: 10 bar at 20 C, Colour handle: blue, orange. The handle can be ordered separately. Valves up to 63mm come with a threaded collar, which holds the ball in its place for easier operation. D ARTNR. EURO L H QNT. 20 AD130 8,35 16 75 60 25 AD131 9,55 19 86 40 32 AD132 10,30 22 97 60 40 AD133 15,75 26 113 40 50 AD134 20,10 31 134 20 63 AD135 33,40 38 163 12 75 AD136 77,80 44 219 4 90 AD137 87,70 51 226 4 110 AD138 143,00 61 280 2 BALL VALVE PN 16 PLAIN DOUBLE UNION code 127 O-ring EPDM 70 sh, ball assembly: PTFE (Teflon). operational pressure:16-63 mm: 16 bar at 20 C, 75-110 mm: 10 bar at 20 C. Colour handle: blue, orange. The handle can be ordered separately. Valves up to 63mm come with a threaded collar, which holds the ball in its place for easier operation. D PN ARTNR. EURO L H QNT. 16 16 AD099 10,70 16 78 50 20 16 AD100 10,70 16 78 50 25 16 AD101 12,35 19 90 30 32 16 AD102 16,10 22 104 50 40 16 AD103 20,80 26 120 30 50 16 AD104 24,30 31 140 20 63 16 AD105 35,70 38 169 12 75 10 AD106 139,00 44 227 3 90 10 AD107 156,00 51 242 3 110 10 AD108 191,00 61 282 2 PN10/16 ARMATURES 1-34 April 2018

ARMATURES AARMATURES INDUSTRIAL BALL VALVE PLAIN DOUBLE UNION code 130 - High quality ball valve with secured ball on both sides, out stream is secured, - O-ring EPDM 70SH, teflon sealing, - operational pressure: 20-63 mm: 16 bar, from 75 mm: 10 bar, - with viton sealing on demand, handle colour is orange. D ARTNR. EURO L Z QNT. 20 AD171 21,20 16 46 50 25 AD172 22,30 19 52 30 32 AD173 31,75 22 60 50 40 AD174 37,70 26 68 30 50 AD175 45,30 31 78 20 63 AD176 65,45 38 93 12 75 AD177 179,00 44 139 3 90 AD178 206,00 51 139 3 110 AD179 288,00 61 160 2 INDUSTRIAL BALL VALVE PLAIN DOUBLE UNION VITON code 130 O-rings VITON, ball assembly: VITON for high chemical resistance. Operational pressure: 20-63 mm: 16 bar at 20 C, 75-110 mm: 10 bar at 20 C. D ARTNR. EURO L Z QNT. 25 AD221 36,70 16 46 50 32 AD222 44,55 19 52 30 40 AD223 56,80 22 60 50 50 AD224 72,30 26 68 30 VITON BALL VALVE PLAIN DOUBLE UNION VITON code 127 O-ring EPDM 70 sh, ball assembly: PTFE (Teflon), operational pressure:3/8" - 2": 16 bar at 20 C, 2½" - 4": 10 bar at 20 C. Handle colour: blue and orange. The handle can be ordered separately. D ARTNR. EURO L H QNT. ½" AD120 11,30 16 78 50 ¾" AD121 12,80 19 90 30 1" AD122 16,80 22 104 50 1¼" AD123 21,85 24 116 30 1½" AD124 25,20 24 126 20 2" AD125 38,40 28 149 12 2½" AD126 145,00 33 205 3 3" AD127 163,00 36 212 3 4" AD128 198,00 42 244 2 FEMALE THREADED PVC BALL VALVE DOUBLE UNION ECONO LINE code 127 Valve with a very competitive price! This valve is recommended for light applications like irrigation, ponds, etc. Not suited for industrial use. We recommend to use this valve only for fully open or fully closed applications. Operational pressure: 25-63 mm: 16 bar at 20 C, 75-110 mm: 10 bar at 20 C. SIZE ARTNR. EURO QNT. 25mm AD088 7,50 88 32mm AD089 9,85 60 40mm AD090 12,65 40 50mm AD091 14,85 24 63mm AD092 21,85 13 75mm AD093 50,65 8 110mm AD094 159,00 2 April 2018 1-35

ARMATURES BALL VALVE SOLVENT WITH DOUBLE UNION PN16 code 127 D PN ARTNR. EURO BOX by 20 16 PV2001 7,45 24 25 16 PV2002 8,15 16 32 16 PV2003 10,30 10 40 16 PV2004 12,45 6 50 16 PV2005 15,35 8 63 16 PV2006 21,85 12 75 16 PV2007 64,55 1 90 16 PV2008 98,40 1 110 (DN80) 16 PV2010R 114,00 1 ARMATURES PVC BALL VALVE PLAIN ECONO-LINE code 112 Ball valve produced in accordance to DIN standards. Suited for i.e. irrigation, swimming pools, ponds, etc. Very competitive in price! Manufacture can vary. Pressure 10 PN. SIZE ARTNR. EURO QNT. 32mm AA991 3,48 120 40mm AA992 5,65 80 50mm AA993 7,15 52 63mm AA994 10,60 36 2- & 3-WAY CYLINDER VALVE 63MM code 900 High quality ABS cylinder valves, made in the Netherlands! Moving parts are made of fibreglass reinforced polymer. Separate couplings are available to make a union. Max. working pressure: 3 bar. TYPE ARTNR. EURO 2-way valve 63mm TA500 32,50 3-way valve 63mm T-port TA502 36,20 Solvent fitting for union 60,3mm (2 ) TA503 10,80 Solvent fitting for union 63mm TA504 10,80 AUTOMATIC 2- & 3-WAY CYLINDER VALVE 63MM code 900 High quality ABS cylinder valves, made in the Netherlands! Moving parts are made of fibreglass reinforced polymer. Separate couplings are available to make a union. Speed- 0.4rpm at 50hz (± 2½ min/rev). Max. working pressure: 3 bar. 230 VAC or 24 VAC 50/60hz. Torque 11Nm. TYPE ARTNR. EURO Automatic 2-way valve 63mm 24VAC TA510 156,00 Automatic 2-way valve 63mm 230VAC TA512 156,00 Automatic 3-way valve 63mm 24VAC TA514 166,00 Automatic 3-way valve 63mm 230VAC TA516 166,00 Solvent fitting for union 60,3mm (2 ) TA503 10,80 Solvent fitting for union 63mm TA504 10,80 1-36 April 2018

ARMATURES 3-WAY BALL VALVE T - PORT SOLVENT code 130 Ball T-port, o-rings EPDM, assemblies teflon, operational pressure: 10 bar at 20 C. D ARTNR. EURO L T N 20 AD232 39,45 112 45 57 25 AD233 56,25 123 55 62 32 AD234 60,80 147 66 74 40 AD235 75,45 169 79 82 50 AD236 97,45 202 96 106 63 AD237 129,00 230 111 117 T-port 3-WAY BALL VALVE L - PORT SOLVENT code 130 Ball L-port, o-rings EPDM, assemblies teflon, operational pressure: 10 bar at 20 C. D ARTNR. EURO L T N 20 AD241 39,45 112 45 57 25 AD242 56,25 123 55 62 32 AD243 60,80 147 66 74 40 AD244 75,45 169 79 82 50 AD245 97,45 202 96 106 63 AD246 129,00 230 111 117 L-port ELECTRIC BALLVALVE WITH ACTUATOR J3-SERIE code 134 Double union solvent weld ball valve with unidirectional electric actuator, power open power close, manual override. New IP65 weatherproof housing. Now fitted with LED status indicator. The J3-series is a more sophisticated model that is equipped with internal protection against valve jams, anti-condensation heater for protection against condensation. Manual override. J3 is available in the series L: 12-24 volt (AC + DC) and H: 110-240 volt (AC + DC).Various options are possible: position adjustment, battery insurance system, potentiometer, etc. Electric butterfly valve on demand. TYPE ARTNR. EURO OPEN/CLOSE TIME *50mm 12/48 VAC/DC (L20) AD910 476,00 8 sec. *50mm 80/240VAC/DC (H20) AD911 476,00 8 sec. *63mm 12/48 VAC/DC (L20) AD912 492,00 8 sec. *63mm 80/240VAC/DC (H20) AD913 492,00 8 sec. *75mm 12/48 VAC/DC (L55) AD914 931,00 10 sec. *75mm 80/240VAC/DC (H55) AD915 931,00 10 sec. *90mm 12/48 VAC/DC (L55) AD916 977,00 10 sec. *90mm 80/240VAC/DC (H55) AD917 977,00 10 sec. *110mm 12/48 VAC/DC (L55) AD918 1.060,00 10 sec. *110mm 80/240VAC/DC (H55) AD919 1.060,00 10 sec. PVC BUTTERFLY VALVE code 130 No pressure loss. Minimum construction size. Washer around valve. Sealing EPDM,VITON on demand. Operational pressure: up to 140mm: max. 10 bar at 20 C, from 140mm: max. 6 bar at 20 C. Maximal operational temperature 60 C. * Ask for availability D ARTNR. EURO DN A B C E S G f I M 90 AD201 152,00 80 3" 233 130 123 31 57 11 18 160 240 110 AD202 169,00 100 4" 253 152 143 31 58 11 18 180 240 125 AD203 193,00 125 5" 264 170 148 31 62 11 18 190 240 *140 AD204 199,00 125 5" 284 185 159 31 63 11 18 210 240 *160 AD205 238,00 150 6" 312 216 169 31 73 14 22 240 340 *200 AD206 348,00 200 8" 370 273 200 31 83 14 22 295 340 April 2018 1-37

ARMATURES PVC DIAPHRAGM VALVE code 133 Operated pneumatic, normally open. PVC body with PP top cap. - EPDM membrane reinforced with nylon, spigot solvent socket, ¼" air connection. - Maximum operational pressure PN 6 (20º C), maximum temperature 60ºC. D ARTNR. EURO Z L C H 40 AD370 55,05 150 204 38 73 50 AD372 55,05 130 192 38 73 * 63 spigot AD374 74,85 148 224 45 80 Separate membrane 40/50 AD376 18,95 - - - - FLOWMETER code 133 - PVC-body. AVAILABLE ON DEMAND: - PVC plain socket with 2/3 adaptor union. - Viton sealings, added value 10,00 trade/set. - Floater PVDF. - Material measuring body:- polyamide. - Sealings EPDM. - Polysulfon. - Max. operational pressure at 20 C: PN10. - P.V.D.F. - Max. temperature 60 C. - Read contacts in combination with magnetic floater. D ARTNR. EURO SCALE ltr/hr LENGTH * 32 AD450 209,00 60-600 350 mm * 32 AD452 209,00 100-1000 350 mm 40 AD456 281,00 250-2500 350 mm 50 AD462 288,00 300 3000 350 mm FLOWMETER EC (ECONOMY CLASS) code 133 - A sharp-edged price! - PVC body, solvent weld with.2/3 unions. - Floater ABS, sealer EPDM. - Maximum pressure 6 bar. - Maximum medium temperature 60 C. SIZE ARTNR. EURO RANGE LENGTH (incl. union) 63mm AD489 132,00 1,6-16m³/Hr 340mm 75mm AD490 206,00 5-25m³/Hr 430mm PVC CHECKVALVE WITH HOSETAIL code 145 Check valve for hose. SIZE ARTNR. EURO B Z QNT. 13mm (½ ) AG120 3,61 50 28 200 17mm (5/8 ) AG122 3,70 50 28 200 21mm (¾ ) AG124 3,88 50 28 200 1-38 April 2018

ARMATURES CHECKVALVE SOLVENT CONNECTION & HOSE TAIL code 133 Checkvalve with spring. Valve has 50mm solvent connections and comes standard with 2 stepped hose tails of 32/40/50mm. TYPE ARTNR. EURO Checkvalve 50mm & hosetail 32/40/50 AD628 28,80 HANGING CHECKVALVE code 130 Hanging checkvalve without spring wire and therefore a minimum of head pressure! To be assembled between flange adaptors. Minimum distance to the pump is 5 x the pipe diameter. D ARTNR. EURO A B C * 110 AD282 49,55 164 23 70 PVC SWING CHECK VALVE code 133 Easy and fast installation, light weight, big opening angle. Application: Chemical Industry, Process technology, Water treatment, Aggressive fluids. EPDM O-ring. Nominal pressure: 10 bar (DN65-125), 6 bar (DN150). Suited for horizontal and vertical installation. SIZE ARTNR. EURO 75mm AD650 59,60 90mm AD651 71,80 110mm AD652 88,95 140mm AD653 107,00 160mm AD654 118,00 Opening pressure DN d c i s PN 6 PN 10 Bolts Size Horizontal Vertical 65 75 46 145 20 80 75 4 16 x 120 80 90 58 160 20 80 77 4 16 x 120 100 110 74 190 23 79 76 8 16 x 120 125 140 94 210 25 80 76 8 16 x 130 150 160 112 240 30 77 75 8 20 x 160 2 mbar 2 mbar 2 mbar 3 mbar 3 mbar 10 mbar 10 mbar 10 mbar 10 mbar 10 mbar CHECKVALVE PVC (PTFE) code 130 The valve can be used with and without a spring, by replacing a plain socket union with a strainer a footvalve is created, O-rings EPDM (Teflon), SS spring, operational pressure: 20 till 63 mm: 16 bar at 20 C, 75 till 110 mm: 10 bar at 20 C. D ARTNR. EURO L Z H E 20 AD140 14,85 16 46 78 50 25 AD141 17,75 19 52 90 60 32 AD142 19,35 22 60 104 68 40 AD143 22,45 26 68 120 80 50 AD144 32,25 31 78 140 94 63 AD145 45,20 38 93 169 115 75 AD146 99,25 44 139 227 168 90 AD147 133,00 51 139 242 168 110 AD148 170,00 61 160 282 210 PTFE April 2018 1-39

ARMATURES CHECKVALVE PVC (VITON) code 130 - O-rings FMP (VITON), additional information can be seen above. Viton rings have a higher chemical resistance. D ARTNR. EURO L Z H E 20 AD260 19,30 16 46 78 50 25 AD261 23,05 19 52 90 60 32 AD262 25,10 22 60 104 68 40 AD263 29,10 26 68 120 80 50 AD264 42,45 31 78 140 94 63 AD265 59,15 38 93 169 115 VITON STRAINER FOR FOOTVALVE code 130 You can create a footvalve by replacing a plain socket from the checkvalve with a strainer. To reduce resistance you can remove the spring out of the valve. D ARTNR. EURO D ARTNR. EURO 20 AD150 5,85 50 AD154 13,80 25 AD151 6,60 63 AD155 16,65 32 AD152 7,90 75/90 AD156 23,25 40 AD153 9,25 110 AD158 25,20 CHECKVALVE WITH BALL MODEL Y code 133 Check valve model "Y" with ball. Suitable for polluted water. Large open passage due to the ball construction. The ball is pushed aside by the water flow causing a full opening. It is possible to open the cap to remove the ball for maintenance. SIZE ARTNR. EURO A B C D L 32mm AD644 37,50 104 67 59 32 112 40mm AD645 39,20 127 81 61 40 144 50mm AD646 51,10 158 99 71 50 158 63mm AD647 72,75 181 112 90 63 190 75mm AD648 137,00 238 154 114 75 270 90mm AD649 197,00 286 178 137 90 324 CHECKVALVE WITH BALL MODEL Y WITH FEMALE THREAD code 133 Check valve model "Y" with ball. Suitable for polluted water. Large open passage due to the ball construction. The ball is pushed aside by the water flow causing a full opening. It is possible to open the cap to remove the ball for maintenance. SIZE ARTNR. EURO A B C D L 1 AD637 35,85 104 67 59 1 112 1¼ AD638 40,80 127 81 61 1¼ 144 1½ AD639 55,25 158 99 71 1½ 158 2 AD640 78,30 181 112 90 2 190 2½ AD641 146,00 238 154 114 2½ 270 3 AD642 209,00 286 178 137 3 324 VALTERRA TRANSPARENT SWING/SPRING CHECKVALVE WITH UNION code 133 Very reliable checkvalve in swing or spring version (with and without spring) with large free flow area. Due to the transparent house waste can be easily spotted. Suited for vertical as well as horizontal installation. Both sides are fitted with unions. TYPE ARTNR. EURO QNT (BOX) 50mm swing (no spring) AD620 31,65 12 50mm spring AD616 31,65 12 63mm swing (no spring) AD622 36,80 12 63mm spring AD618 36,80 12 1-40 April 2018

ARMATURES CEPEX SLIDE VALVES code 808 PVC slide valves with stainless steel spindle and stainless steel bolts and nuts. Gate is made of POM. EPDM paddle. SIZE ARTNR. EURO PN BOX 50 mm SB023 11,95 3,5 8 63 mm SB024 17,45 3,5 12 90 mm SB025 54,50 1,5 3 110 mm SB026 58,30 1,5 2 VDL SLIDE VALVE code 808 Durable slide valve, removable packing, leak free in all positions. Adjustable packing alongside steering shaft. 50 till 125mm have a PVC sealing slide. 160 and 200mm have a stainless steel paddle. TYPE ART. NR. EURO Operational pressure at 20 C QNT. 50 mm SB060 27,70 3 bar 25 63 mm SB061 45,00 2 bar 12 75 mm SB062 66,70 1,5 bar 8 90 mm SB063 99,95 1 bar 6 110 mm SB070 119,00 1 bar 24 125 mm OUTER DIAMETER SB073 116,00 1 bar 1 160 mm SB071 305,00 0,75 bar 1 200 mm SB072 590,00 0,5 bar 1 Seal set 50 mm SB056 6,70 - - Seal set 110 mm SB067 16,60 - - VDL SLIDE VALVE WITH TANKCONNECTOR code 808 Durable slide valve, removable packing, leak free in all positions. Can be blocked manually in every position. Adjustable packing alongside steering shaft. d1 ART. NR. EURO Operational pressure at 20 C d3 B C D Z3 QNT. 50mm SB050 49,20 3 bar 2" 31 117 52 0-21 25 63mm SB051 71,65 2 bar 2½" 38 133 52 0-23 12 * 75 mm SB052 93,35 1,5 bar 3 44 148 56 0-20 8 110mm SB054 159,00 1 bar M133 61 191 66 0-22 24 VALTERRA PNEUMATIC ACTUATOR code 808 A delivered complete with valve and pneumatic cylinder. Pneumatic pressure: 4-5 bar. Connection cylinder: 4 mm. TYPE ARTNR. EURO Operational pressure at 20 C 63 mm pneumatic SB080 130,00 max. 2,8 bar 90 mm pneumatic SB081 144,00 max. 1,4 bar 110 mm pneumatic SB082 307,00 max. 1 bar April 2018 1-41

ARMATURES VALTERRA UNIBODY code 808 The model "Unibody" is made out of one piece and can therefore be used at higher pressure. Furthermore the paddle acts as a sealer instead of rubber rings, because it is covered by rubber. The lock on top has a lever. This prevents the vacuum and makes the Unibody very easy to open, without much effort. TYPE ART. NR. EURO operational pressure at 20 C QNT (BOX) 50 mm Unibody SB110 10,85 max. 6,6 bar 30 63 mm Unibody SB111 17,60 max. 5 bar 20 VALTERRA 110 WITH PLASTIC PADDLE code 808 Two new versions of the popular Valterra 110mm slide valve: SB112: Stainless Steel 304 shaft and hardware, plastic paddle and a grey handle; SB113: Stainless Steel 316 shaft and hardware, plastic paddle and a black handle. TYPE ARTNR. EURO 110mm plastic paddle (Stainless Steel 304 shaft/hardware) SB112 49,15 110mm plastic paddle (Stainless Steel 316 shaft/hardware) SB113 56,20 VALTERRA SLIDE VALVE 2 X PLAIN SOCKET code 808 PVC slide valve with Stainless Steel spindle with triple sealing at the top (3 x O-ring). Application: ponds, pools, whirlpools, tanks, glasshouses. The Valterra slide valves are equipped with the new Santoprene seals (100% chemical resistant) which are suited for vacuum and pressure. The paddle is made of plastic, except the 110/160/200mm which have a Stainless Steel paddle. Ideal for low pressure installations. Also available in Inch sizes (page 1-4). Extensions can be screwed onto the spindle. SIZE ART. NR. EURO Operational pressure closed Operational pressure open QNT (BOX) 50 mm SB120 14,15 max. 3,1 bar max. 2,1 bar 26 63 mm SB121 20,65 max. 2,8 bar max. 1,4 bar 16 75 mm SB119 26,80 max. 1 bar max. 1 bar 12 90 mm SB122 29,40 max. 1 bar max. 1 bar 12 E B A C 90 mm (SS paddle) SB118 50,30 max. 1 bar max. 1 bar 12 F D 110 mm (SS paddle) SB123 62,55 max. 1 bar max. 1 bar 6 160 mm (SS paddle) SB124 281,00 max. 0,7 bar max. 0,4 bar 1 B = height when paddle is completely opened 200 mm (SS paddle) SB125 408,00 max. 0,7 bar max. 0,4 bar 1 250 mm (SS paddle) SB116 546,00 max. 0,5 bar max. 0,4 bar 1 315 mm (SS paddle) SB117 707,00 max. 0,5 bar max. 0,4 bar 1 SPARE PARTS ARTNR. EURO Extension alu. 45 cm SB090 11,65 Extension alu. 75 cm SB092 15,75 Extension alu. 100 cm SB094 20,25 Extension SS 61 cm SB095 14,50 Rubber seal 50 mm SB126 3,26 Rubber seal 63 mm SB127 3,96 Rubber seal 75/90 mm SB128 4,83 Rubber seal 110 mm SB129 6,85 Rubber seal 160/200 mm SB130 40,05 Valterra handle plastic SB096 2,17 Valterra handle aluminium SB097 4,01 1-42 April 2018

SOLVENTS & SEALANTS GRIFFON UNI-100 WITH KIWA CERTIFICATION code 151 SOLVENTS & SEALANTS Thixotrope hard pvc-glue, suited for hard PVC pipes and valves in both pressure and drainage. Griffon Uni 100 has gap filling capabilities and is also suited for roof gutters. Complete product information is available on demand. Pressure filling capacity max. 0,2 mm. Gap filling capacity max. 0,8 mm. For more information about the Uni-100 XT, see the advertisement above. * Ask for availability. VOLUME ARTNR. EURO PACKAGING QNT. 125 ml AK101 8,55 tube 30 250 ml AK102 11,05 can 24 500 ml AK103 18,50 can 12 1000 ml AK104 31,80 can 8 1000 ml XT (low odour) AK100 31,80 can 8 *5000 ml AK105 151,00 can 1 GRIFFON T-88 WITH KIWA CERTIFICATION (965 N/980) code 151 Thin liquid hard pvc-glue, suited for hard PVC pipes and valves, like drainage systems with narrow space. Complete product information available on demand. Pressure filling capacity max. 0,2mm, Gap filling capacity max. 0,3mm. VOLUME ARTNR. EURO PACKAGING QNT. 100 ml AK106 8,30 can 24 250 ml AK107 9,80 can 24 500 ml AK108 18,00 can 12 1000 ml AK109 29,90 can 8 *5000 ml AK110 137,00 can 1 GRIFFON M-385 (70 T) code 151 SOLVENTS & SEALANTS Special glue, to bond soft PVC-liner, e.g pond liner and ground sheet. The glue is also suited for flexible PVC hoses to hard PVC fittings. Recommended is to test this usage in advance, because of the vast amount of different qualities of hoses. VOLUME ARTNR. EURO PACKAGING QNT. 250 ml AK180 12,65 bottle 24 GRIFFON WDF-05 WET AND DRY PVC AND ABS CEMENT code 151 Solvent cement for joining PVC and ABS (flexible) tubes, coupling sleeves and fittings in pressure and drainage up to diameter 160 mm. Maximum pressure 16 bar for PVC (PN16) and 5 bar for ABS (PN5). - Suitable for Wet and Dry Conditions (not under water) - Extremely fast drying. For PVC and ABS - Gap filling (max. 0,8mm) - For Flexible tubes (hoses) and Swimming Pool Installations - Brush included. According to European standard EN 14814 VOLUME ARTNR. EURO PACKAGING QNT. 125 ml AK181 8,00 can 24 250 ml AK182 9,80 can 24 500 ml AK183 19,00 can 12 GRIFFON CLEANER code 151 Cleaner for hard PVC pipes and fittings. Griffon cleaner is being used to clean the surfaces that are going to be glued. This is necessary for an optimal attachment. VOLUME ARTNR. EURO PACKAGING QNT. 125 ml AK114 6,30 can 20 500 ml AK115 13,35 can 50 1000 ml AK116 22,10 can 12 5000 ml AK113 81,55 can 1 1-44 April 2018

SOLVENTS & SEALANTS BISON HARD PLASTIC GLUE code 151 High quality and strong adhesive for plastic. Bonds plastics such as ABS, acrylic glass (Perspex, plexiglass ), polycarbonate (Lexan ) and hard PVC. Also great for gluing PVC electric cable pipes. Not suitable for polyethylene (PE), polypropylene (PP) and P.T.F.E. Come per 24 pieces in a special counter box. TYPE ARTNR. EURO QNT. Bison hard plastic glue 25ml in tube AK184 5,60 24 TANGIT ALL PRESSURE & CLEANER code 151 Tangit All Pressure Hard-PVC solvent glue is suited for pipes and PVC-U sockets and fittings for high pressure (max. pn 16) and/or chemical applications. Tangit All Pressure glue meets the DIN 16970, KOMO and KIWA/ATA demands. The glue is viscous and can fill up spaces up to 0,8mm. Complete technical information is available on demand. This glue has an expiration time of 18 months. Tangit glue is toluene free, which is environmental friendly! For cleaning hard PVC-pipes, before gluing with Tangit. Tangit cleaner is based on acetone and butanone. Tangit cleaner is free of methylenechloride, which is environmental friendly! *Ask for availability. VOLUME ARTNR. EURO PACKAGING QNT. 125 gr tube AK299 8,05 tube 12 250 ml+ brush AK300 9,60 can 12 500 ml+ brush AK302 17,45 can 12 1 kg with lid AK304 30,90 can 6 1 kg+brush AK306 29,95 can 8 *4,5 kg with lid AK308 130,00 can 1 125 ml Cleaner AK318 5,05 can 20 1 litre Cleaner AK320 18,25 can 8 PTFE THREAD TAPE code 151 P.T.F.E. Tape to seal threaded connections. Pressure class 0,2 (12 m x 12 mm x 0,1 mm). TYPE ARTNR. EURO SIZE QNT. Gastec certified AK119 2,51 12 x 12 x 0,1 roll (10 pieces) DIN tape AK120 1,29 12 x 12 x 0,1 roll (10 pieces) KOLMAT FIBRE SEAL FABRIC REINFORCED SEALING STRIP code 151 Proved, fabric reinforced sealing strip for metal- and plastic threaded connections. CHARACTERISTICS: can be corrected up to 180, suitable for e.g. (tap)water, steam, gas LPG, Glycol, (compressed) air and attenuated acids and bases of plastic, metal, or a combination of both. Fabric reinforced, demountable, proven quality, easy handling, quick and clean. To seal conical and cylindrical (curved) metal -and plastic- threaded connections. Suitable for copper, brass, (galvanized) steel, stainless steel, zinc, PVC and ABS. Gas: up to a maximum of 5 bar at a temperature of -20 C to + 70 C water (steam): up to a maximum of 16 bar pressure at a temperature of + 95 C, to max. 7 bar pressure at +130 C. TYPE ARTNR. EURO SIZE QNT. Kolmat Fibre Seal AK147 5,70 14mm x 15 mtr 30 TANGIT UNI-LOCK code 151 The universal sealant for threaded connections. Consists of a multi-threaded nylon cord that has been impregnated with a silicon solution which allows the seal of metal and plastic threaded connections. This can be pressurised immediately. Water 7 bar, gas 16 bar. Applications: For all liquids (except hydrocarbon and oxygen) from -20º up to 130ºC. For all gasses (earth gas, butane, propane, compressed air). For all materials: PVC-U, PVC-C, PP, PE, steel, copper, cast iron, brass, SS, aluminium. All diameters till 6, all sorts of threaded connections - conical and cylindrical. Vibration- and weather resistant, adjustable up to ½ a twist, prevents leeway, clean. ARTNR. EURO QNT. AK146 16,35 1 (80 mtr) April 2018 1-45

SOLVENTS & SEALANTS KOLMAT PLASTIC SEALANT FOR THREADED CONNECTIONS code 151 To seal conical and cylindrical plastic-threaded connections (plastic on plastic and plastic on metal). Suitable for cold/warm water and (compressed) air. Applicable for PVC, CPVC and ABS, possibly in a combination with e.g. copper, brass, (galvanized) steel and stainless steel. Joint can carry load up to 8 bar. The joint can be adjusted for about 5 minutes.. TYPE ARTNR. EURO SIZE QNT Kolmat Plastic AK143 21,15 125 gram 6 SEALING PRODUCTS code 151 Solid and Sure! Liquid locking & sealing products for threaded fittings. TYPE ARTNR. EURO QNT. Loctite 5331 Thread sealing plastic on plastic AK142 21,05 100ml and iron on plastic Loctite 577 thread sealing metal/metal AK144 41,20 50ml SEALANT TAPE code 151 PVC tape: Waterproof tape to seal and repair PVC drainpipes and roof gutters. Gaffer tape: Superior-quality universal high strength fibre tape. Can be used for waterproof sealing, repairing, protecting, attaching, strenghthen, fixing and bonding. Attaches to most types of material: Stone, metal, concrete, PVC, wood. TYPE ARTNR. EURO SIZE PVC tape black AK155 8,30 20m x 5cm Duct tape multi-purpose AK157 9,10 25m x 48mm SILICON SANITARY code 151 High-quality acid silicon kit for sealing and bonding, indoors and outdoors. Especially fit for sanitary. Colour: Transparent. TYPE ARTNR. EURO PACKING. QNT. Silicon sanitary sealant transparent AK126 8,75 310 ml 20 Mastic gun metal heavy duty AK128 13,75 1 1 AQUAFORTE SUPERSTRONG MS POLYMER code 151 Superior-quality, all-purpose construction adhesive, sealant and sealant-adhesive based on MS-polymer. Excellent bonding with 100% waterproof seal. Excellent sealing with high bonding strength. FIELD OF APPLICATION: for bonding, constructing and sealing of nearly every kind of material to nearly every kind of surface. Ideal for garden, pond and construction use. Replaces various: acrylic, bitumen, butyl, silicone, polyurethane sealants. Replaces also wood-contact; mirror-tile; construction glues. It can be used under water. Not suited for PE and PP. Content: 290 ml. COLOUR ARTNR. EURO QNT. Black AK260 12,25 12 White AK261 15,80 12 Transparent AK262 15,80 12 Mastic gun metal heavy duty AK128 13,75 1 1-46 April 2018

SOLVENTS & SEALANTS GRIFFON SFT-101 REPAIR TAPE code 151 Universal, self-fusing, sealing and insulating, silicon-based repair tape. For quick and easy sealing and repairing of leaks in conduits, pipes, fittings, traps and hoses. Also applicable for the (watertight) sealing of electrical connections and for insulating and protecting electrical plugs and cables. Also suitable for connecting objects to each other, joining materials, protecting against rust and as anti-slip for handles and tools, among other things. For indoor, outdoor and underwater applications. Properties Pressure resistant up to 12 bar, immediately watertight and airtight Insulating up to 15,000 volts per layer Resistant to temperatures between -54 C and +260 C Resistant to acids, alkalis, solvents, oils, gasoline and hydrocarbons Stretchable up to 300% (remains elastic) Self-fusing (bonds to itself immediately) A few seconds correctable, can be subjected to a load immediately Applicable under pressure, suitable for underwater applications Easily removed, leaves no adhesive residue TYPE ARTNR. EURO SFT-101 Repair tape (3 mtr) AK154 13,85 GRIFFON EPOXY REPAIR STICK code 151 2-component epoxy putty for (emergency) repairs of damage, sealing leaks, holes and cracks. - Attaches to i.e.: metal, steal, copper, aluminium, iron, zinc, PVC, wood, plastics, ceramics and concrete. - Attaches also to a damp surface. Drilling, sawing, smoothening and painting is possible after hardening (30 minutes). - Does not attach to PE, PP, nylon and Teflon. Does not shrink and is chemical resistant. - Use only for draining and low pressure during application on PVC. - Harmful for organisms living in water. TYPE ARTNR. EURO QNT Epoxy Repair Stick AK150 17,05 box (12 pieces) April 2018 1-47

MAINTENANCE PRODUCTS MAINTENANCE PRODUCTS BISON LIQUID RUBBER SEALING AND PROTECTIVE COATING code 148 Griffon HBS-200 Liquid Rubber is a universal, environmentally friendly, sealing and protective coating. To seal and protect a wide variety of materials, such as concrete, metal, stone, wood, bitumen, zinc, PVC, EPDM (test in advance), etc. For floors, partitions, walls, seams, joints, conduits and structural components. Excellent for both interior and exterior applications (bathrooms, cellars, balconies, roofs, etc.) including gutters, shower basins, conduit ducts, floor seams, dilatation joints, window frame joints and ground level items. Also suitable for garden, pond and swimming pool structures. Water and vapour resistant, very high permanent elasticity (900%), excellent adhesion to many substrates, protects against corrosion and erosion, easy to apply, all weather and UV resistant, salt and chemicals resistant, paintable. The coating is temperature resistant from -40 C to 160 C. Ecological: solvent-free, VOCfree, Non-toxic, Water-based. Layer thickness: 2mm. Use ± 2,7 liters per m². TYPE ARTNR. EURO QNT. HBS-200 Liquid Rubber 1 liter bucket AH500 27,65 6 HBS-200 Liquid Rubber 5 liter bucket AH501 113,00 1 HBS-200 Liquid Rubber 16 liter bucket AH502 338,00 1 Geotextile roll 20 meter, 15cm wide AH506 13,30 3 BLACK EXTERIOR FILLER-ADHESIVE code 151 Polyurethane Sealant Ideal for Ponds & Waterfalls Fish & Plant Safe. Won't discolour like other foam! Blends into Shadows. Superior Adhesive for Landscaping Projects. Expands & Fills Voids. Fill knot holes in trees to seal out water and pests. Direct Water Flow in and around water gardens won t harm plants. Repair rock walls replaces loose or damaged mortar. Product has a dark grey colour after curing. TYPE ARTNR. EURO BOX VOLUME Black Foam AK254 9,10 12 340 g (9 liter foam) 1-48 April 2018

TOOLS GRIFFON SILICON SPRAY - MULTISPRAY code 151 Silicon spray can be used as a universal lubricant product that protects against moist and dirt. It can also be used as a cleaning product for various surfaces. Multispray is a multifunctional colourless lubricant and maintenance product. Cleans, protects, releases rusted parts. Has an active water suppressing ability. TYPE ARTNR. EURO QNT. QNT. Silicon spray AK130 10,00 300 ml 12 Multispray AK138 10,35 300 ml 12 LUBRICANT GRIFFON P-20 code 151 Thixotropic lubrication product for the assembly of pushfit fittings with rubber ring closures. Applicable in domestic systems of PVC, Polypropylene, ABS, ASA, etc. for pressure- and waste systems. GRIFFON P-20 does not contain health damaging ingredients. Meets: KIWA VGB 27 a CERTIFICATION. GEREEDSCH TYPE ART.NR EURO QNT. QNT. 800gr KIWA AK135 15,60 800 gr 12 LUBRICANT SPRAY code 151 Lubricant, free of acids, for the assembly of pushfit fittings with rubber ring closures. Silicon based. TYPE ART.NR EURO QNT. QNT. Lubricant spray AK136 10,60 400 ml 12 BRUSHES code 151 Disposable brushes, ideal for gluing etc. FOR TUBE ARTNR. EURO TYPE 20 32 mm AK421 1,40 nr.12 - Ø19mm 40 63 mm AK424 1,33 30 mm flat 75 200 mm AK425 1,91 50 mm flat TOOLS CLAMPING WRENCH code 151 For sizes 25-110mm. Very handy tool to (un)tighten unions. 7 TYPE ARTNR. EURO Clamping wrench 25-110 mm AK475 24,60 PIPE/HOSE CUTTER code 151 Ideal for cutting PE pipe and various hoses. 7 TYPE ARTNR. EURO 16-32 mm AK477 33,55 April 2018 1-49

TOOLS CORD SAW code 151 For cutting plastic pipes. Ideal to use in places that are hard to reach. For PVC, PVC-C, PP and PE. - Thin wire with raw saw cut for quick application - Solid handles Place the wire to the pipe and pull it back and forth in a sawing motion. The wire will curl up and is hot after use. Length: 88,5 cm. TYPE ARTNR. EURO Cord saw AK478 23,80 HANDSAW FOR PVC code 151 A saw especially designed for PVC and ABS pipes, also saws plasterboards, polyester panels, wood with nail residue, messing en copper piping material. TYPE ARTNR. EURO PVC Handsaw AK480 45,65 CHAMFERING TOOL code 151 For sharpening PE pipe 16 till 63 mm (maximal 300 RPM). SIZE ARTNR. EURO 16-63 mm AK470 22,40 PIPE CHAMFERING TOOL code 151 For chamfering plastic pipes like PVC, C-PVC, ABS, PP and PE. Suitable for diameters of 16 mm < 63 mm. - Creates a chamfer angle of 15 - Prevents glue from being 'pushed away'. Plastic pipes need to be clean, dry and free of grease. Five adapter rings for 20, 25, 32, 40 and 50 mm are integrated into the chamfering tool. To place these: Loosen the screws. Place the adapter rings of the desired diameter (for example, for a diameter of 40 mm place the adapter ring with a diameter of 50 and 40). Tighten the screw (not further than the adapter rings). The other adapter rings can be placed on the rear of the chamfering tool. Place the chamfering tool over the pipe and move it around until the entire pipe has a rim of 15. Do not apply pressure on the pipe. TYPE ARTNR. EURO Chamfering tool 16-63mm AK471 125,00 FLOWSTOP EZ-SEAL 92-145MM code 148 The perfect problem solver for i.e. sealing bottom drains during maintenance. Flowstop 92-145mm is now available with 3 meters of hose and a valve (9mm hose tail connection). AH605 does not fit on the handpump. TYPE ARTNR. EURO Flowstop 48-72 mm AH600 69,50 Flowstop 72-92 mm AH602 69,90 Flowstop 92-145 mm AH604 73,70 Flowstop 92-145 mm incl. 3 mtr hose AH605 98,10 Flowstop 145-200 mm AH606 121,00 Flowstop 200-320 mm AH608 243,00 Handpump AH610 14,50 1-50 April 2018

PVC PRESSURE PIPES 6 / 7,5 PN PIPE LENGTH 1 MTR WITHOUT SOCKET code 160 TOOLS PVC PRESSURE PIPES PIPE 0 Pipe with a length of 1 meter, without socket. SIZE ARTNR. EURO/MTR LENGTH SIZE ARTNR. EURO/MTR LENGTH 32 x 1,6 BA482 2,02 1 Mtr 75 x 2,2 BA486 6,30 1 Mtr 40 x 1,9 BA483 2,80 1 Mtr 90 x 2,7 BA487 9,00 1 Mtr 50 x 2,0 BA484 3,67 1 Mtr 110 x 3,2 BA488 13,40 1 Mtr 63 x 2,0 BA485 4,59 1 Mtr 1 Meter 10 PN PIPE LENGTH 1 MTR WITHOUT SOCKET code 160 Pipe with a length of 1 meter, without socket. 0 SIZE ARTNR. EURO/MTR LENGTH SIZE ARTNR. EURO/MTR LENGTH 32 x 1,8 BA552 2,22 1 Mtr 90 x 3,5 BA580 11,60 1 Mtr 40 x 1,9 BA556 2,80 1 Mtr 110 x 4,2 BA584 17,00 1 Mtr 50 x 2,4 BA563 4,40 1 Mtr 125 x 4,8 BA586 21,75 1 Mtr 63 x 2,4 BA570 5,70 1 Mtr 160 x 6,2 BA588 35,90 1 Mtr 75 x 2,9 BA576 8,10 1 Mtr 1 Meter 10 / 12,5 PN PIPE LENGTH 1 MTR WITHOUT SOCKET code 160 0 Pipe with a length of 1 meter, without socket. SIZE ARTNR. EURO/MTR LENGTH 1 Meter 63 x 3,0 BA572 6,95 1 Mtr 75 x 3,6 BA578 9,85 1 Mtr 90 x 4,3 BA582 14,10 1 Mtr 16 PN PIPE LENGTH 1 MTR WITHOUT SOCKET code 160 Pipe with a length of 1 meter, without socket. 0 SIZE ARTNR. EURO/MTR LENGTH 25 x 1,9 BA550 1,99 1 Mtr 32 x 2,4 BA554 2,90 1 Mtr 40 x 3,0 BA558 4,30 1 Mtr 50 x 3,7 BA565 6,70 1 Mtr 63 x 4,7 BA574 10,60 1 Mtr 1 Meter 6 / 7,5 PN PIPE LENGTH 2 MTR WITHOUT SOCKET code 160 Attention! Pipe with a length of 2 meter is pallet freight! Pipe 1 meter can be shipped with parcel service. SIZE ARTNR. EURO/MTR LENGTH SIZE ARTNR. EURO/MTR LENGTH 32 x 1,6 BA452 2,02 2 Mtr 75 x 2,2 BA456 6,30 2 Mtr 40 x 1,9 BA453 2,80 2 Mtr 90 x 2,7 BA457 9,00 2 Mtr 50 x 2,0 BA454 3,67 2 Mtr 110 x 3,2 BA458 13,40 2 Mtr 63 x 2,0 BA455 4,59 2 Mtr 2 Meter 10 PN PIPE LENGTH 2 MTR WITHOUT SOCKET code 160 Attention! Pipe with a length of 2 meter is pallet freight! Pipe 1 meter can be shipped with parcel service. 0 SIZE ARTNR. EURO/MTR LENGTH SIZE ARTNR. EURO/MTR LENGTH 32 x 1,8 BA553 2,22 2 Mtr 90 x 3,5 BA581 11,60 2 Mtr 40 x 1,9 BA557 2,80 2 Mtr 110 x 4,2 BA585 17,00 2 Mtr 50 x 2,4 BA564 4,40 2 Mtr 125 x 4,8 BA587 21,75 2 Mtr 63 x 2,4 BA571 5,70 2 Mtr 160 x 6,2 BA589 35,90 2 Mtr 75 x 2,9 BA577 8,10 2 Mtr 2 Meter April 2018 1-51

PVC PRESSURE PIPE 10 / 12,5 PN PIPE LENGTH 2 MTR WITHOUT SOCKET code 160 0 Attention! Pipe with a length of 2 meter is pallet freight! Pipe 1 meter can be shipped with parcel service. SIZE ARTNR. EURO/MTR LENGTH 2 Meter 63 x 3,0 BA573 6,95 2 Mtr 75 x 3,6 BA579 9,85 2 Mtr 90 x 4,3 BA583 14,10 2 Mtr 16 PN PIPE LENGTH 2 MTR WITHOUT SOCKET code 160 Attention! Pipe with a length of 2 meter is pallet freight! Pipe 1 meter can be shipped with parcel service. 0 SIZE ARTNR. EURO/MTR LENGTH 25 x 1,9 BA551 1,99 2 Mtr 32 x 2,4 BA555 2,90 2 Mtr 40 x 3,0 BA559 4,30 2 Mtr 50 x 3,7 BA569 6,70 2 Mtr 63 x 4,7 BA575 10,60 2 Mtr 2 Meter 7,5 ATO KIWA PIPE WITH SOCKET code 160 SIZE MM ART. NR. EURO/ MTR LENGTH CRATE SIZE MM ART. NR. EURO/ MTR LENGTH CRATE 25 x 1,5 BA490 1,93 5 mtr 2500 mtr 110 x 3,2 BA408 13,40 5 mtr 215 mtr 32 x 1,6 BA402 2,02 5 mtr 1220 mtr 125 x 3,7 BA409 17,05 5 mtr 190 mtr 40 x 1,9 BA422 2,80 5 mtr 1225 mtr 160 x 4,7 BA410 27,50 5 mtr 110 mtr 50 x 2,0 BA404 3,67 5 mtr 1075 mtr 200 x 5,9 BA411 46,20 5 mtr 70 mtr 63 x 2,0 BA405 4,59 5 mtr 800 mtr *250 x 7,3 BA413 66,20 5 mtr 35 mtr 75 x 2,2 BA406 6,30 5 mtr 500 mtr *315 x 9,2 BA414 120,00 5 mtr 25 mtr 90 x 2,7 BA407 9,00 5 mtr 315 mtr 5 Meter 10 ATO KIWA PIPE WITH SOCKET code 160 SIZE MM ART. NR. EURO/ MTR LENGTH CRATE SIZE MM ART. NR. EURO/ MTR LENGTH CRATE 5 Meter 25 x 1,5 BA490 1,93 5 mtr 2500 mtr 90 x 3,5 BA426 11,60 5 mtr 315 mtr 32 x 1,6 BA402 2,02 5 mtr 1220 mtr 110 x 4,2 BA427 17,00 5 mtr 215 mtr 40 x 1,9 BA422 2,80 5 mtr 1225 mtr 125 x 4,8 BA428 21,75 5 mtr 190 mtr 50 x 2,4 BA423 4,40 5 mtr 1075 mtr 160 x 6,2 BA429 35,90 5 mtr 110 mtr 63 x 2,4 BA424 5,70 5 mtr 800 mtr *200 x 7,7 BA430 60,00 5 mtr 70 mtr 75 x 2,9 BA425 8,10 5 mtr 500 mtr 12,5 ATO KIWA PIPE WITH SOCKET code 160 SIZE MM ART. NR. EURO/ MTR LENGTH CRATE SIZE MM ART. NR. EURO/ MTR LENGTH CRATE 25 x 1,5 BA490 1,93 5 mtr 2500 mtr 110 x 5,3 BA496 20,75 5 mtr 215 mtr 63 x 3,0 BA493 6,95 5 mtr 800 mtr 125 x 6,0 BA497 26,60 5 mtr 190 mtr 75 x 3,6 BA494 9,85 5 mtr 500 mtr 160 x 7,7 BA498 44,45 5 mtr 110 mtr 90 x 4,3 BA495 14,10 5 mtr 315 mtr 5 Meter 1-52 April 2018

PVC PRESSURE PIPE 16 ATO KIWA PIPE WITH SOCKET code 160 SIZE MM ART. NR. EURO/ MTR LENGTH CRATE SIZE MM ART. NR. EURO/ MTR LENGTH CRATE 12 x 1,0 BA250 1,25 4 mtr - 32 x 2,4 BA254 3,51 4 mtr 976 mtr 16 x 1,5 BA251 1,38 4 mtr 6000 mtr 40 x 3,0 BA255 5,50 4 mtr 980 mtr 20 x 1,5 BA252 1,49 4 mtr 5000 mtr 50 x 3,7 BA256 8,00 4 mtr 860 mtr 25 x 1,9 BA253 2,09 4 mtr 2000 mtr 63 x 3,8 BA257 11,80 4 mtr 640 mtr 4 Meter 20 ATO INDUSTRIAL PIPE GREY RAL7011 code 166 SIZE MM ARTNR. EURO/MTR LÄNGE SIZE MM ARTNR. EURO/MTR LÄNGE 5 Meter 10 x 1,2 BA900 2,35 5 mtr 25 x 2,8 BA908 4,62 5 mtr 12 x 1,4 BA902 2,43 5 mtr 32 x 3,6 BA910 8,10 5 mtr 16 x 1,8 BA904 2,73 5 mtr *63 x 7,0 BA916 29,35 5 mtr 20 x 2,3 BA906 3,18 5 mtr TRANSPARENT PIPE LENGTH 1 MTR WITHOUT SOCKET code 175 Transparent pipe with a length of 1 metre, without socket. SIZE ARTNR. EURO/MTR LENGTH WALL THICKNESS 50mm BA625 30,55 1 mtr 50 x 2,4 mm 10 63mm BA630 35,60 1 mtr 63 x 3 mm 10 110mm BA642 49,00 1 mtr 110 x 2,2 mm 4 PN TRANSPARENT LENGTH 1 meter! TRANSPARENT PIPE LENGTH 5 MTR WITHOUT SOCKET code 175 Length 5 mtr, colour: transparent, according to DIN 8062 and ISO standard, self-extinguishing according to DIN 4102, at 20 C and medium water. ¹Delivery: out of stock. Acrylate pipe with size16-400 mm :- price on demand. SIZE MM PN ARTNR. EURO/MTR SIZE MM PN ARTNR. EURO/MTR 16 x 1,2 16 BA604 5,10 50 x 2,4 10 BA622 30,55 20 x 1,5 16 BA606 7,45 63 x 3,0 10 BA628 35,60 25 x 1,5 10 BA608 9,80 75 x 1,8 4 BA632 34,70 25 x 1,9 16 BA610 11,00 90 x 1,8 4 BA636 35,85 32 x 1,8 10 BA612 12,20 110 x 2,2 4 BA640 52,25 32 x 2,4 16 BA614 15,10 *125 x 2,5 4 BA644 87,75 40 x 2,0 10 BA616 16,90 *160 x 3,2 4 BA648 139,00 50 x 1,8 6 BA620 22,50 TRANSPARENT LENGTH 5 meter PIPE 5 MTR WITH FULL PERFORATION code 169 Length 5 meter including socket. For professional purposes we advise you to use a pn 10 filter pipe. SIZE MM PN ARTNR. EURO/ LENGTH PERF. SIZE MM PN ARTNR. EURO/ LENGTH PERF. 40 7½ BA320 39,80 0,3mm 90 10 BA343 91,75 0,5mm 50 10 BA340 49,40 0,3mm 110 10 BA344 137,00 0,5mm 63 10 BA341 58,50 0,3mm 125 10 BA345 169,00 0,5mm 75 10 BA342 73,50 0,5mm NYLON FILTERSTOCKING code 169 SIZE MM FOR TUBE ARTNR. EURO/MTR ROLL MTR 50 until 65 50 until 75 BA360 2,36 ± 100 80 90 BA361 2,63 ± 100 100 110 BA362 2,88 ± 100 125 125 BA363 3,32 ± 100 160 160 BA364 4,67 ± 100 April 2018 1-53

POLYETHYLENE PIPE POLYETHYLENE PIPE LDPE PIPE WITHOUT CERTIFICATION code 187 Very suitable for irrigation. SIZE PN ARTNR. EURO/MTR ROLL LENGTH 16,0 x 1,5 4 CA130 0,80 100 20,0 x 1,5 4 CA131 0,99 100 25,0 x 1,9 4 CA132 1,56 100 25,0 x 2,7 6 CA137 2,01 100 25,0 x 2,7 6 CA138 2,01 500 32,0 x 2,0 4 CA136 2,10 100 32,0 x 3,0 6 CA133 3,00 100 HDPE PIPE WITHOUT CERTIFICATION code 187 Very suitable for irrigation. SIZE MM PN ARTNR EURO/MTR ROLL LENGTH 32 x 2,0 10 CA100 2,66 50 32 x 2,0 10 CA101 2,66 100 40 x 2,0 8 CA102 2,83 50 40 x 2,0 8 CA103 2,83 100 50 x 2,4 8 CA106 4,23 50 50 x 2,4 8 CA107 4,23 100 *50 x 3,0 10 CA108 6,35 50 *50 x 3,0 10 CA109 6,35 100 63 x 3,0 8 CA111 6,70 100 *63 x 3,8 10 CA112 10,10 50 *63 x 3,8 10 CA113 10,10 100 *75 x 3,6 8 CA114 9,45 50 *75 x 3,6 8 CA115 9,45 100 PE 40 PIPE SDR9 PN 6,3 WITH KIWA CERTIFICATION for water code 181 Colour: black with blue stripe. SIZE ARTNR. EURO/MTR PN ROLL LENGTH 16 x 1,8 CA150 1,17 6 50 16 x 1,8 CA151 1,02 6 100 20 x 2,2 CA152 1,46 6 50 20 x 2,2 CA153 1,46 6 100 25 x 2,7 CA154 2,27 6 50 25 x 2,7 CA155 2,27 6 100 32 x 3,5 CA156 3,81 6 50 32 x 3,5 CA157 3,81 6 100 40 x 4,3 CA158 5,85 6 50 40 x 4,3 CA159 5,85 6 100 50 x 5,4 CA160 9,10 6 50 PE 100 PIPE PN 10 & PN 12,5 WITH KIWA/GASTEC CERTIFICATION for water code 184 Colour: black with blue stripe. SIZE ARTNR. EURO/MTR PN ROLL LENGTH 32 x 2,0 CA171 2,16 10 100 25 x 2,0 CA204 1,81 12,5 50 25 x 2,0 CA206 1,81 12,5 100 1-54 April 2018

CLAMP SADDLES PP CLAMP SADDLES PP CLAMP SADDLE PP WITHOUT SS REINFORCEMENTS RING code 154 The clamp saddle is made of PP. Equipped with nuts and bolts. Operational pressure till 90mm: 10 bar. Saddles up to 50 mm have 2 bolts, saddles from 63 mm to 90 mm have 4 bolts. SIZE MM x FEM. THR. ARTNR. EURO QNT. 32 x ½" AL206 1,62 90 32 x ¾" AL208 1,62 90 40 x ½" AL210 1,82 70 40 x ¾" AL212 1,82 70 40 x 1" AL214 1,82 10 50 x ¾" AL218 1,98 5 50 x 1" AL220 1,98 5 63 x ¾" AL224 2,74 5 63 x 1" AL226 2,74 5 CLAMP SADDLE PP WITH SS REINFORCEMENTS RING code 154 Clamp saddle made of PP. Equipped with nuts and bolts with a SS reinforcements ring. Operational pressure till 160mm: 10 bar operational pressure, 200 till 315mm: 6 bar. Saddles till 50 mm have 2 bolts, saddles 63 mm till 125 mm have 4 bots, saddles 140 mm till 315 mm have 6 bolts. SIZE MM x FEM. THR. ARTNR. EURO SIZE MM x FEM. THR. ARTNR. EURO 20 x ½" AL100 2,63 75 x 1 ¼" AL121 6,15 25 x ½" AL101 2,61 75 x 1 ½" AL122 6,15 25 x ¾" AL102 2,61 75 x 2" AL123 6,45 32 x ½" AL103 2,91 90 x ½" AL124 7,25 32 x ¾" AL104 2,91 90 x 1" AL126 7,25 32 x 1" AL105 2,91 90 x 2" AL129 8,35 40 x ½" AL106 3,34 110 x ½" AL130 8,35 40 x ¾" AL107 3,34 110 x ¾" AL131 8,35 40 x 1" AL108 3,34 110 x 1" AL132 8,35 50 x ½" AL109 3,51 110 x 1 ¼" AL133 8,55 50 x ¾" AL110 3,51 110 x 1 ½" AL134 8,55 50 x 1" AL111 3,51 110 x 2" AL135 9,25 63 x ½" AL113 4,59 *125 x 1" AL138 16,40 63 x ¾" AL114 4,59 125 x 1 ¼" AL139 16,85 63 x 1" AL115 4,59 125 x 1 ½" AL140 20,25 63 x 1 ¼" AL116 4,59 125 x 2" AL141 20,85 63 x 1 ½" AL117 4,59 160 x 1 ½" AL156 24,85 75 x ½" AL118 5,80 *200 x 2 AL160 86,75 75 x ¾" AL119 5,80 *250 x 4 AL165 126,00 75 x 1" AL120 5,80 April 2018 1-55

PIPE CLIPS PRAHER PIPE CLIPS code 142 Praher pipe clips have many benefits! The screw holes are in the middle and left and right of the pipe. They are provided with a filling block, are connectable and can be attached with one click. D ARTNR. EURO QNT. 50 AF290 1,96 500 63 AF291 2,37 300 PIPE CLIP TYPE UNIBODY code 142 D ARTNR. EURO QNT. 40 AF274 0,98 10 50 AF275 1,15 10 63 AF276 1,40 10 75 AF277 1,94 10 110 AF279 3,20 10 Ø110mm Ø40 to Ø75mm connectable PIPE CLIPS PIPE CLIP PE TYPE ASV code 142 D ARTNR. EURO QNT. D ARTNR. EURO QNT. 16 AF200 0,90 20 75 AF207 3,64 10 20 AF201 0,93 20 90 AF208 4,93 10 25 AF202 0,95 20 110 AF209 5,90 10 32 AF203 1,19 20 125 AF210 8,20 10 40 AF204 1,58 10 140 AF211 9,40 10 50 AF205 2,10 10 160 AF212 10,90 10 63 AF206 2,33 10 PIPE CLIP TYPE VDL code 142 D ARTNR. EURO QNT. TYPE D ARTNR. EURO QNT. TYPE 10 AF228 0,61 500 A 75 AF237 4,19 90 B 12 AF229 0,61 500 A 90 AF238 5,40 60 B 16 AF230 0,68 400 A 110 AF239 6,15 40 B 20 AF231 0,79 400 A 125 AF240 9,00 40 B 25 AF232 0,97 800 A 160 AF242 11,55 10 B 32 AF233 1,14 600 A 200 AF243 18,95 10 B 40 AF234 1,63 250 B *225 AF244 21,95 10 B 50 AF235 1,91 250 B *250 AF245 28,55 10 B 63 AF236 2,49 150 B *315 AF246 35,80 10 B A B up to 32 mm from 40 mm FILLING BLOCK code 142 For VDL pipe clip. Height = 20 mm. D ARTNR. EURO QNT. D ARTNR. EURO QNT. 16 mm AF249 0,46 400 75 mm AF256 2,23 80 20 mm AF250 0,46 400 90mm AF257 2,21 100 25 mm AF251 0,51 800 110mm AF258 2,55 80 32 mm AF252 0,61 600 *125mm AF259 3,70 150 40 mm AF253 0,88 400 *140mm AF260 4,19 140 50 mm AF254 0,99 250 *160mm AF261 4,75 120 63 mm AF255 1,34 150 1-56 April 2018

BEULCO CONNECTORS BEULCO CONNECTORS BEULCO CONNECTORS Brass tension proof connectors with KIWA CERTIFICATION. The clamping ring has to be used together with a connector (order separately!) Also suited for gas (not suited for GASTEC). CLAMPING RING code 196 PE-SIZE ARTNR. EURO PE-SIZE ARTNR. EURO 25 x 2,7 CK310 3,62 40 x 4,3 CK326 6,20 32 x 2,0 CK312 4,75 50 x 2,9/3,0 CK330 10,15 32 x 3,0 CK316 4,75 50 x 5,4 CK336 10,15 32 x 3,5 CK318 4,75 * 63 x 3,6 CK340 16,95 40 x 2,3/2,4 CK320 6,20 * 75 x 4,3 CK352 25,40 40 x 3,7 CK324 6,20 STRAIGHT CONNECTOR WITH PIPE MALE THREAD code 196 Order support nut separately. SIZE ARTNR. EURO SIZE ARTNR. EURO *20 x ½" CK382 10,85 50 x 1½" CK390 47,80 25 x ¾" CK384 14,45 *63 x 2" CK392 63,95 32 x 1" CK386 21,30 *75 x 2½" CK394 119,00 40 x 1¼" CK388 31,00 WALLPLATE PE CLAMP X FEMALE THREAD code 190 COMPRESSION FITTINGS FOR PE PIPE SIZE ARTNR. EURO QNT. 16 x ½ fem.thr. CK112 8,50-25 x ¾" fem.thr. CB347 5,30 10 16mm 25mm April 2018 1-57

COMPRESSION FITTINGS FOR PE PIPE COMPRESSION FITTINGS FOR PE PIPE Casing in black, nut in blue or green, both made of Polypropylene. O-ring nbr 70 shore. Fittings from 2 and up come with a SS reinforcements ring. Max. operational pressure at 20ºC: pn 10. COUPLING code 190 SIZE ARTNR. EURO QNT. 16 x 16 CB170 1,89 20 20 x 20 CB171 2,37 20/160 25 x 25 CB172 2,85 10/200 32 x 32 CB173 3,67 10/120 40 x 40 CB174 5,95 5/70 50 x 50 CB175 8,05 5/40 63 x 63 CB176 11,05 1/25 75 x 75 CB177 27,55 1 *90 x 90 CB178 35,60 1 *110 x 110 CB179 77,40 1 REDUCING COUPLING code 190 SIZE ARTNR. EURO QNT. 20 x 16 CB180 2,09 20 25 x 16 CB194 2,55 10 25 x 20 CB181 2,55 10 32 x 20 CB192 4,43 10 32 x 25 CB182 3,28 10 40 x 25 CB183 5,80 5 40 x 32 CB184 5,80 5 50 x 32 CB185 7,45 5 50 x 40 CB186 7,45 5 63 x 40 CB193 10,45 5 63 x 50 CB187 10,45 5 *75 x 63 CB188 25,60 1 END PLUG code 190 SIZE ARTNR. EURO QNT. 16 CB080 1,30 20 20 CB081 1,40 20 25 CB082 1,50 10 32 CB083 1,86 10 40 CB084 3,15 5 50 CB085 4,65 5 63 CB086 6,40 5 *75 CB087 22,75 1 *90 CB088 27,65 1 *110 CB089 60,95 1 1-58 April 2018

COMPRESSION FITTINGS FOR PE PIPE FEMALE ADAPTOR code 190 SIZE ARTNR. EURO QNT. SIZE ARTNR. EURO QNT. 16 x ½" CB140 1,35 20 40 x 1 ¼" CB151 3,77 5 16 x ¾" CB141 1,38 20 40 x 1 ½" CB137 3,91 5 20 x ½" CB142 1,49 20 50 x 1 ¼" CB152 4,79 5 20 x ¾" CB143 1,54 20 50 x 1 ½" CB153 4,79 5 25 x ½" CB144 1,74 10 50 x 2" CB138 5,15 5 25 x ¾" CB145 1,74 10 63 x 1 ½" CB154 6,90 1 25 x 1" CB146 1,81 10 63 x 2" CB155 6,90 1 32 x ¾" CB147 2,15 10 *75 x 2" CB156 18,10 1 32 x 1" CB148 2,24 10 *75 x 2 ½" CB157 18,10 1 32 x 1 ¼" CB149 2,74 10 *90 x 3" CB139 22,80 1 40 x 1" CB150 3,63 5 *110 x 4" CB161 54,35 1 MALE ADAPTOR code 190 SIZE ARTNR. EURO QNT. SIZE ARTNR. EURO QNT. 16 x ½" CB100 1,28 20/220 50 x 1 ¼" CB113 4,81 5 16 x ¾" CB101 1,28 20/220 50 x 1 ½" CB114 4,81 5 20 x ½" CB102 1,34 20/240 50 x 2" CB115 4,94 5 20 x ¾" CB103 1,34 20/240 63 x 1 ½" CB116 6,75 5 25 x ½" CB104 1,61 20/300 63 x 2" CB117 7,00 5 25 x ¾" CB105 1,63 20/300 63 x 2 ½" CB118 7,15 5 25 x 1" CB106 1,69 20/300 75 x 2" CB119 17,90 1 32 x ¾" CB107 2,03 20/180 75 x 2 ½" CB120 17,90 1 32 x 1" CB108 2,07 10/180 *75 x 3" CB121 17,90 1 32 x 1 ¼" CB109 2,14 10 *90 x 3" CB123 23,95 1 40 x 1" CB110 3,63 5 *90 x 4" CB124 25,40 1 40 x 1 ¼" CB111 3,74 5 *110 x 3" CB125 43,60 1 40 x 1 ½" CB112 3,90 5 *110 x 4" CB126 43,60 1 90 TEE code 190 SIZE ARTNR. EURO QNT. 16 x 16 x 16 CB200 2,45 20/80 20 x 20 x 20 CB201 3,12 20/80 25 x 25 x 25 CB202 4,36 10/100 32 x 32 x 32 CB203 5,40 10/60 40 x 40 x 40 CB204 8,70 10/40 50 x 50 x 50 CB205 11,75 10/20 63 x 63 x 63 CB206 16,85 5/12 *75 x 75 x 75 CB207 38,05 5 *90 x 90 x 90 CB208 56,80 4 *110 x 110 x 110 CB209 108,00 1 90 REDUCER TEE code 190 SIZE ARTNR. EURO QNT. *20 x 25 x 20 CB215 4,14 10/100 25 x 20 x 25 CB216 4,14 10/100 *25 x 32 x 25 CB214 5,05 10/100 32 x 25 x 32 CB217 5,05 10/60 40 x 32 x 40 CB218 11,45 10 50 x 40 x 50 CB220 15,40 10 April 2018 1-59

COMPRESSION FITTINGS FOR PE PIPE 90 TEE WITH THREADED MALE OFFTAKE code 190 SIZE ARTNR. EURO QNT. 16 x ½" x 16 CB310 2,47 20 16 x ¾" x 16 CB311 2,47 20 20 x ½" x 20 CB312 2,61 20 20 x ¾" x 20 CB313 2,70 20 25 x ½" x 25 CB308 3,35 10 25 x ¾" x 25 CB314 3,35 10 25 x 1" x 25 CB315 3,46 10 32 x ¾" x 32 CB309 4,26 10 32 x 1" x 32 CB316 4,24 10 40 x 1 ¼" x 40 CB318 7,90 5 50 x 1 ½" x 50 CB319 10,50 5 63 x 2" x 63 CB320 20,75 5 *75 x 2 ½" x 75 CB321 38,15 1 *90 x 3" x 90 CB322 61,45 1 *110 x 4" x 110 CB323 84,75 1 90 TEE WITH THREADED FEMALE OFFTAKE code 190 SIZE ARTNR. EURO QNT. 16 x ½" x 16 CB240 2,16 20 16 x ¾" x 16 CB234 2,45 20 20 x ½" x 20 CB242 2,47 20 20 x ¾" x 20 CB243 2,57 20 25 x ½" x 25 CB244 3,20 10 25 x ¾" x 25 CB245 3,35 10 25 x 1" x 25 CB246 3,46 10 32 x ¾" x 32 CB248 4,19 10 32 x 1" x 32 CB249 4,31 10 40 x 1" x 40 CB251 7,20 5 40 x 1 ¼" x 40 CB252 7,30 5 50 x 1 ½" x 50 CB253 10,05 5 63 x 2" x 63 CB254 18,35 4 *75 x 2 ½" x 75 CB255 30,75 1 *90 x 3" x 90 CB256 49,95 1 *110 x 4" x 110 CB257 75,40 1 90 ELBOW code 190 SIZE ARTNR. EURO QNT. 16 x 16 CB290 1,97 20/140 20 x 20 CB291 2,37 20/140 25 x 25 CB292 3,39 20/180 32 x 32 CB293 3,50 10/100 40 x 40 CB294 6,25 5/60 50 x 50 CB295 8,70 5/35 63 x 63 CB296 10,50 5 75 x 75 CB297 26,70 1 *90 x 90 CB298 37,65 1 *110 x 110 CB299 71,70 1 1-60 April 2018

COMPRESSION FITTINGS FOR PE PIPE 90 ELBOW WITH THREADED MALE OFFTAKE code 190 SIZE ARTNR. EURO QNT. SIZE ARTNR. EURO QNT. 16 x ½" CB330 1,59 20 32 x 1" CB334 2,43 10 16 x ¾" CB328 1,44 20 40 x 1 ¼" CB335 3,96 5 20 x ½" CB331 1,69 20/240 50 x 1 ½" CB336 5,45 5 20 x ¾" CB326 1,69 20 50 x 2" CB329 5,45 5 25 x ½" CB325 1,90 10/250 63 x 2" CB337 7,55 5 25 x ¾" CB332 1,90 10/250 *75 x 2 ½" CB339 20,70 1 25 x 1" CB333 2,03 10 *90 x 3" CB341 27,15 1 32 x ¾" CB327 2,43 10 *110 x 4" CB342 52,65 1 90 ELBOW WITH THREADED FEMALE OFFTAKE code 190 SIZE ARTNR. EURO QNT. SIZE ARTNR. EURO QNT. 16 x ½" CB260 1,47 20 32 x 1" CB269 2,61 10 16 x ¾" CB261 1,49 20 40 x 1 ¼" CB271 5,05 5 20 x ½" CB262 1,69 20 50 x 1 ½" CB273 6,85 5 20 x ¾" CB263 1,69 20 63 x 2" CB275 9,15 5 25 x ½" CB264 2,14 10 *75 x 2" CB279 21,50 1 25 x ¾" CB265 2,14 10 *75 x 2 ½" CB276 21,05 1 25 x 1" CB266 2,14 10 *90 x 3" CB277 32,80 1 32 x ¾" CB268 2,61 10 *110 x 4" CB278 61,45 1 90 ELBOW FOR POP-UP code 190 SIZE ARTNR. EURO QNT. 25 x 25 x ½" fem.thr. CB344 3,65 10/160 32 x 32 x ¾" fem.thr. CB345 4,57 10/160 WALLPLATE PE CLAMP X FEMALE THREAD code 190 SIZE ARTNR. EURO QNT. 16 x ½ fem.thr. CK112 8,50-25 x ¾" fem.thr. CB347 5,30 10 16mm 25mm O-RING code 190 SIZE ARTNR. EURO SIZE ARTNR. EURO 16 CB070 0,34 50 CB075 1,00 20 CB071 0,34 63 CB076 1,45 25 CB072 0,50 *75 CB077 2,55 32 CB073 0,57 *90 CB078 3,49 40 CB074 0,90 *110 CB079 7,20 April 2018 1-61

QUICK JOINTS FOR DRIPLINE AND PE PIPE CLIP COUPLINGS FOR DRIPLINE AND PE PIPE PN4 QUICK JOINTS FOR DRIPLINE AND PE PIPE The hose is being attached on a tulle and joint with a nut. This creates a very strong connection! Maximum operational pressure 4 bar at 20ºC. COUPLING code 193 SIZE/MM ARTNR. EURO QNT. 16 x 16 CB560 0,96 50 20 x 20 CB562 1,12 50 MALE ADAPTOR code 193 SIZE/MM ARTNR. EURO QNT. 16 x ½" CB569 0,73 50 16 x ¾" CB570 0,73 50 20 x ½" CB572 0,84 50 20 x ¾" CB574 0,90 50 90 TEE code 193 SIZE/MM ARTNR. EURO QNT. 16 x 16 x 16 CB590 1,50 30 20 x 20 x 20 CB592 2,10 30 90 ELBOW code 193 SIZE/MM ARTNR. EURO QNT. 16 x 16 CB600 1,12 50 20 x 20 CB602 1,47 50 LIGHT CAP code 193 Fits on almost all accessories, conical seal, thus no rubber ring. SIZE ARTNR. EURO QNT. ¾" CB480 0,26 100 1" CB482 0,31 100 INSERT FITTINGS FOR PE PIPE 1-62 April 2018

INSERT FITTINGS FOR PE PIPE PP ADAPTOR PEACES FOR PE PIPE Note: these insert fittings are especially for PE-pipes, this makes the size of the tulle some millimetres smaller!! The given size, is the external size of the PE-pipe. For low pressure application a hose clip is not needed because of the sharp edges on the tulle. Max. 4 bar at 20ºC. LIGHT COUPLING code 193 SIZE/MM ARTNR. EURO QNT. 16 x 16 CB350 0,22 100 20 x 20 CB351 0,28 100 25 x 25 CB352 0,35 100 32 x 32 CB353 0,47 50 90 TEE code 193 SIZE/MM ARTNR. EURO QNT. 16 x 16 x 16 CB360 0,28 100 20 x 16 x 20 CB365 0,63 100 20 x 20 x 20 CB361 0,53 100 25 x 25 x 25 CB362 0,98 100 32 x 32 x 32 CB363 1,33 50 90 TEE WITH MALE THEAD code 193 SIZE/MM ARTNR. EURO QNT. 16 x ¾" x 16 CB402 0,40 100 20 x ¾" x 20 CB406 0,67 100 *25 x ¾" x 25 CB410 1,00 100 MALE ADAPTOR code 193 SIZE/MM ARTNR. EURO QNT. 16 x ½" CB370 0,35 100 16 x ¾" CB371 0,43 100 20 x ½" CB372 0,43 100 20 x ¾" CB373 0,43 100 25 x ¾" CB374 0,47 100 25 x 1" CB369 0,53 100 32 x 1" CB368 0,56 50 90 ELBOW code 193 SIZE ARTNR. EURO QNT. 16 x 16 CB375 0,28 100 20 x 20 CB376 0,31 100 25 x 25 CB377 0,98 100 32 x 32 CB378 1,43 50 April 2018 1-63

INSERT FITTINGS FOR PE PIPE RABBIT CYLINDER VALVE INSERT/INSERT code 193 SIZE/MM ARTNR. EURO QNT. 16 x 16 CB380 2,18 50 20 x 20 CB381 2,18 50 25 x 25 CB382 2,18 50 THREADED CAP & RUBBER RING code 193 TYPE ARTNR. EURO QNT. Threaded cap ½" CB390 0,31 100 Threaded cap ¾" CB391 0,35 100 Threaded cap 1" CB392 0,45 50 Rubber ½" CB395 0,18 100 Rubber ¾" CB396 0,18 100 Rubber 1" CB397 0,24 50 LIGHT CAP code 193 Fits on practically all accessories, conical seal, thus no rubber ring. SIZE ARTNR. EURO QNT. ¾" CB480 0,26 100 1" CB482 0,31 100 1-64 April 2018

FLEXIBLE FITTINGS FLEXIBLE FITTINGS FERNCO FLEXIBLE COUPLINGS The Fernco Straight and Adaptor Couplings offers a quick, versatile and easy to use solution to every domestic drain, waste and vent plumbing problem. Adaptor couplings are available in a variety of sizes ranging from 32mm to 219mm in diameter and are ideal for connecting pipes with differing outside diameters whether due to different pipe materials or pipe sizes. Fernco Straight Couplings are available in an array of sizes ranging from 38mm to 219mm in diameter and provide an effective solution for jointing pipes with similar outside diameters and are ideal for any emergency repairs whatever the pipe size or material. Made from a durable Thermoplastic compound, Fernco s Adaptor and Straight Couplings have the dimensional flexibility that ensures a leakproof seal on many pipe materials including plastic, cast iron, asbestos cement, clay, concrete, steel, fibre and cast iron. STRAIGHT COUPLING code 454 Delivery time additional sizes: 1 week. SIZE RANGE ARTNR. EURO 30-42 mm FC100 14,30 50-63 mm FC102 14,90 60-70 mm FC103 21,75 90-101 mm FC105 30,85 98-115 mm FC106 26,45 118-133 mm FC108 30,75 145-168 mm FC110 56,05 199-219 mm FC114 92,60 REDUCER COUPLING code 454 Delivery time additional sizes: 1 week. CLAMP REACH ARTNR. EURO 75/90-50/63 FC132 22,80 120/133-98/115 FC135 34,35 145/168-98/115 FC138 58,95 FC132 FC135 & FC138 FLEXIBLE FITTINGS April 2018 1-65

FLEXIBLE FITTINGS FLEXIBLE COUPLINGS The ideal solution for applications in which bonding is not an option or not desirable. Suitable for many applications. Ideal when the connection does not have an exact angle of 90 degrees or is not straight, these fittings will adapt without a problem. In the diagram you can see for which external diameter these fittings can be used: external pipe size, and also the external diameter of PVC fittings! MALE PIPE MALE PIPE MALE PRESSURE FITTING CLAMP REACH 1¼ 40mm 32 41-38 mm 1½ 50mm 40 50-44 mm 2 63mm 50 63-57 mm 3 90mm 75 90-82 mm 4 110mm 90 110-100 mm EXAMPLE 50mm fitting (external = 60,5mm) Ø50mm pipe FLEXIBLE SOCKET code 454 SIZE CLAMP REACH ARTNR. EURO BOX 1¼ / 40mm 41-38 mm FC119 2,66 100 1½ / 50mm 50-44 mm FC120 2,93 100 2 / 63mm 63-57 mm FC122 3,20 100 2½ / 75 mm 75-67 mm FC124 6,70 80 3 / 90mm 90-82 mm FC126 4,48 80 4 / 110mm 110-100 mm FC128 6,15 60 6 / 160 mm 158-168 mm FC130 17,25 20 FLEXIBLE REDUCING SOCKET code 454 SIZE ARTNR. EURO BOX 1½ x 1¼ / 50 x 40mm FC140 2,84 100 2 x 1½ / 63 x 50mm FC142 3,11 100 3 x 2 / 90 x 63mm FC146 6,80 80 4 x 2 / 110 x 63mm FC147 7,20 60 4 x 3 /110 x 90mm FC148 7,70 60 FLEXIBLE BEND code 454 SIZE CLAMP REACH ARTNR. EURO BOX 1½ / 50mm 50-44 mm FC170 6,70 50 2 / 63mm 63-57 mm FC172 7,20 20 3 / 90mm 90-82 mm FC176 12,25 20 4 / 110mm 110-100 mm FC178 15,65 6 FLEXIBLE T code 454 SIZE CLAMP REACH ARTNR. EURO BOX 1½ / 50mm 50-44 mm FC150 7,80 50 2 / 63mm 63-57 mm FC152 8,85 20 3 / 90mm 90-82 mm FC156 15,15 20 4 / 110mm 110-100 mm FC158 22,40 6 FLEXIBLE END CAP code 454 SIZE CLAMP REACH ARTNR. EURO BOX 1½ / 50mm 50-44 mm FC160 1,90 160 2 / 63mm 63-57 mm FC162 2,53 150 3 / 90mm 90-82 mm FC166 3,38 100 4 / 110mm 110-100 mm FC168 4,20 80 1-66 April 2018

DRAINAGE DRAINAGE DRAINAGE PIPE WITH COCOS FIBRE 090-1000 (750GR/M²) code 448 NOM. SIZE (MM) ARTNR. EURO/MTR ROLL (MTR) 50 FP140 3,43 50 60 FP144 3,93 50 80 FP152 7,40 50 DRAINAGE PIPE WITH PP-450 MU code 448 NOM. SIZE (MM) ARTNR. EURO/MTR ROLL (MTR) 50 FP160 3,30 50 60 FP164 3,79 50 80 FP172 7,00 50 DRAINAGE PIPE code 448 NOM. SIZE (MM) ARTNR. EURO/MTR ROLL (MTR) 50 FP120 1,32 50 60 FP124 1,88 50 80 FP132 3,20 50 PVC ENDCAP code 445 RAINWATER DIAM. ARTNR. EURO 50 FP248 0,55 60 FP250 0,60 80 FP254 0,95 100 FP256 1,60 H CLICK COUPLER AND DRAINAGE REDUCER code 445 DIAM. ARTNR. EURO 50 FP200 1,14 60 FP202 1,58 80 FP206 2,08 100 FP208 2,82 80 x 50 FP240 2,97 90º TEE (DOUBLE BRANCHE) code 445 DIAM. ARTNR. EURO 50 FP210 5,90 60 FP212 6,40 80 FP216 7,10 90º REDUCER TEE (DOUBLE BRANCHE) code 445 DIAM. ARTNR. EURO * 80 x 50 FP220 6,95 April 2018 1-67

PUSH FIT FITTINGS PUSH FIT FITTINGSD BLACK PP PLAIN END PIPE 5 MTR code 815 Please note: This pipe cannot be glued and can only be used with push fit sockets. SIZE ARTNR. EURO/METER LENGTH 50 x 44,0 mm SD104 6,90 5 mtr 75 x 69,0 mm SD106 10,15 5 mtr 90 x 84,0 mm SD108 13,20 5 mtr 110 x 103,2 mm SD110 16,05 5 mtr PP pipe PE PLAIN END PIPE LENGTH 5 METER code 451 Please note: This pipe can not be glued and can only be used with push fit sockets. SIZE ARTNR. EURO/MTR LENGTH 40 x 3 mm FB100 3,57 5 mtr 50 x 3 mm FB102 4,48 5 mtr 75 x 3 mm FB106 6,95 5 mtr 90 x 3 mm FB108 9,50 5 mtr 110 x 3,5 mm FB110 13,40 5 mtr PE pipe WAFIX PP PUSH FIT FITTINGS code 451 Wafix PP is the complete waste system from Wavin with an excellent quality. Unique in its kind: because the PP fittings have a fixated rubber ring, are robust and slender in shape. The Wafix PP waste system is made of polypropylene copolymer (PPC) that is very impact resistant, temperature resistant (up to 100 C) and chemical resistance. The push fit connection enables fast and efficient assembly, is weather-independent and can be installed at temperature that go down to -10 C. The fittings have a unique "slim" finish. By the slim design of the fittings the dimensions are brought down to an absolute minimum. - Fixated rubber ring, 100% waterproof - Fast, weather independent installation (for temperatures that go down to -10 C) - UV resistant - High chemical resistance The fixated rubber ring guarantees a reliable connection. Due to this fixation the rubber ring cannot be pushed away when inserting a pipe in a fitting DOUBLE SOCKET CENTER STOP code 815 SIZE ARTNR. EURO 32 mm SD120 2,23 40 mm SD122 2,28 50 mm SD124 2,38 75 mm SD126 4,37 90 mm SD128 7,25 110 mm SD130 7,60 125 mm SD132 9,05 DOUBLE SOCKET SLIP code 815 SIZE ARTNR. EURO 40 mm SD142 2,28 50 mm SD144 2,47 75 mm SD146 4,37 90 mm SD148 7,25 110 mm SD150 7,60 125 mm SD152 10,35 1-68 April 2018

PUSH FIT FITTINGS PUSH FIT FITTINGS 45 BEND DOUBLE SOCKET code 815 SIZE ARTNR. EURO 32 mm SD160 2,23 40 mm SD162 2,38 50 mm SD164 3,42 75 mm SD166 5,55 90 mm SD168 8,30 110 mm SD170 8,65 125 mm SD172 12,90 88,5 BEND DOUBLE SOCKET code 815 SIZE ARTNR. EURO 32 mm SD180 2,85 40 mm SD182 3,14 50 mm SD184 3,50 75 mm SD186 6,50 90 mm SD188 9,75 110 mm SD190 9,80 125 mm SD192 15,50 45 BEND SOCKET/SPIGOT code 815 SIZE ARTNR. EURO 40 mm SD202 1,99 50 mm SD204 2,98 75 mm SD206 5,55 90 mm SD208 8,40 110 mm SD210 8,90 88,5 BEND SOCKET/SPIGOT code 815 SIZE ARTNR. EURO 40 mm SD222 2,64 50 mm SD224 3,13 75 mm SD226 6,05 90 mm SD228 9,35 110 mm SD230 9,65 45 TEE 3 x SOCKET code 815 SIZE ARTNR. EURO 32 mm SD240 4,61 40 mm SD242 4,86 50 mm SD244 6,20 75 mm SD246 10,00 90 mm SD248 12,95 110 mm SD250 16,05 125 mm SD252 20,50 April 2018 1-69

PUSH FIT FITTINGS 88,5 TEE 3 x SOCKET code 815 SIZE ARTNR. EURO 32 mm SD260 4,86 40 mm SD262 5,80 50 mm SD264 6,60 75 mm SD266 11,15 90 mm SD268 11,45 110 mm SD270 15,55 125 mm SD272 22,95 45 TEE 2 x SOCKET 1 x SPIGOT code 815 SIZE ARTNR. EURO 40 mm SD282 4,35 50 mm SD284 5,90 75 mm SD286 9,65 110 mm SD290 14,20 88,5 TEE 2 x SOCKET 1 x SPIGOT code 815 SIZE ARTNR. EURO *40 mm SD302 4,55 50 mm SD304 6,50 75 mm SD306 9,15 110 mm SD310 13,60 REDUCER code 815 SIZE ARTNR. EURO 50 x 40 mm SD320 2,90 75 x 40 mm SD322 4,55 75 x 50 mm SD324 4,64 90 x 75 mm SD326 5,10 110 x 40 mm SD328 5,30 110 x 50 mm SD330 5,30 110 x 75 mm SD332 5,30 110 x 90 mm SD334 6,40 SEALERCAP / ENDCAP code 815 SIZE ARTNR. EURO TYPE 50 mm to be used in socket SD342 1,72 A 75 mm to be used in socket SD344 2,78 A 110 mm to be used in socket SD346 5,10 A * 110 mm to be used round a pipe SD348 8,75 B A B 1-70 April 2018

PVC WASTE PIPES PVC WASTE PIPES WASTE PIPES GREY WITHOUT SOCKET code 403 Pipes with SN8 and SN4 Komo-cert. according to NEN 7045 and 7029 for sewer drainage and sewer press piping. For separation of the different sewer systems (dirt and rainwater) various diameters are available in the colour RAL 8023 redbrown (BR80) for rainwater free decline and the colour RAL7037 middlegrey (GR33) for dirt water free decline.k687. SN1 previous class 65. SN2 previous class 51. SN4 previous class 41. SN8 previous class 34. SIZE CLASS ARTNR. EURO/MTR WALL THICKNESS LENGTH MTR/ CRATE 32 Ultra 3- SN4 FF102 2,25 ± 3,0 5 mtr 1375 mtr 40 Ultra 3- SN4 FF104 2,80 ± 3,0 5 mtr 840 mtr 50 Ultra 3- SN4 FF106 3,64 ± 3,0 5 mtr 570 mtr 75 Ultra 3- SN2 FF108 4,06 ± 1,8 5 mtr 500 mtr 75 Ultra 3- SN4 FF110 5,45 ± 3,0 5 mtr 500 mtr 90 Ultra 3- SN4 FF116 7,10 ± 3,0 4 mtr - 110 Ultra 3- SN2 FF120 6,15 ± 2,2 5 mtr 425 mtr 110 Ultra 3- SN4 FF122 8,60 ± 3,2 5 mtr 425 mtr 125 Ultra 3- SN2 FF128 7,90 ± 2,5 5 mtr 340 mtr 125 Ultra 3- SN4 FF130 10,10 ± 3,2 5 mtr 340 mtr *125 Ultra 3- SN8 FF132 11,25 ± 3,7 5 mtr 340 mtr 160 Ultra 3- SN2 FF138 13,10 ± 3,2 5 mtr 195 mtr 160 Ultra 3- SN4 FF140 15,70 ± 4,0 5 mtr 195 mtr *200 Ultra 3- SN2 FF148 18,95 ± 3,9 5 mtr 115 mtr *200 Ultra 3- SN4 FF150 23,00 ± 4,9 5 mtr 115 mtr *250 Ultra 3- SN2 FF158 29,20 ± 4,9 5 mtr 70 mtr *315 Ultra 3- SN2 FF164 45,45 ± 6,2 5 mtr 45 mtr *400 Ultra 3- SN2 FF168 84,15 ± 7,8 5 mtr 25 mtr DRAINAGE PIPE CLASS 51/SN2 GREY SINGLE SOCKET code 403 3-layer drainage pipe with push fit socket. Length is 5 meter. SN2 previous class 51. SIZE ARTNR. EURO/MTR CLASS WALL THICKNESS MTR/ CRATE 110 FF240 6,85 SN2 ± 2,2 425 mtr 125 FF241 8,60 SN2 ± 2,5 340 mtr *160 FF242 14,40 SN2 ± 3,2 195 mtr *200 FF243 20,90 SN2 ± 4,0 115 mtr *250 FF244 32,20 SN2 ± 4,9 70 mtr *315 FF245 49,90 SN2 ± 6,2 45 mtr SN2 PUSH FIT SOCKET April 2018 1-71

SOLVENT WELD WASTE FITTINGS SOLVENT WELD WASTE FITTINGS FLEXIBEND DOUBLE SOCKET code 406 Difficult connections no longer exist. Create your own joint! Adapts every desired bend from 0º to 120º, even at two different levels. Compensates a level difference between two pipes. Easily and rapidly to install. Replaces all PVC bends: just 1 joint for the 40 and 50mm diameters. Easily adapts to already installed pipes. Solvent PVC. DIAM. ARTNR. EURO 40 FF294 7,15 50 FF295 12,40 DOUBLE SOCKET SN4 code 406 All articles have the KOMO-mark. DIAM. ARTNR. EURO BOX 32 FF300 0,57 10/100 40 FF302 0,64 10/100 50 FF304 0,75 10/100 75 FF306 2,23 20 90 FF308 2,23 20 110 FF310 2,48 20 125 FF312 3,18 20 160 FF314 6,50 20 200 FF316 18,35 18 *250 FF317 20,50 1 315 FF318 39,00 1 DOUBLE SOCKET SLIP SN4 code 406 DIAM. ARTNR. EURO BOX 32 FF320 3,21 25 40 FF322 3,77 5/50 50 FF324 4,05 5/50 75 FF326 6,05 5/30 EXPANSION SOCKET 2-PIECE SN4 code 406 DIAM. ARTNR. EURO BOX * 50 FF682 6,35 5 75 FF684 8,95 10 110 FF686 9,65 10 * 125 FF688 11,50 10 1-72 April 2018

SOLVENT WELD WASTE FITTINGS 15º BEND 2 x SOCKET SN4 code 406 DIAM. ARTNR. EURO BOX 110 FF330 4,57 20 125 FF332 10,70 20 22º BEND SOCKET/SPIGOT SN4 code 406 DIAM. ARTNR. EURO BOX 75 FF336 4,88 10 110 FF338 4,88 45 * 125 FF340 6,60 20 30º BEND 2 X SOCKET SN4 code 406 DIAM. ARTNR. EURO BOX 110 FF344 5,15 20 45º BEND SOCKET/SPIGOT SN4 code 406 DIAM. ARTNR. EURO BOX 32 FF348 0,70 10/100 40 FF350 0,75 10/100 50 FF352 1,38 10/100 75 FF354 2,75 20 110 FF356 4,28 30 125 FF358 6,60 20 160 FF360 13,10 5 45º BEND 2 x SOCKET SN4 code 406 DIAM. ARTNR. EURO BOX 32 FF362 0,70 10/100 40 FF364 0,75 10/100 50 FF366 1,38 10/100 75 FF368 2,75 20 90 FF370 3,65 20 110 FF372 4,28 30 125 FF374 6,60 20 160 FF376 13,10 5 April 2018 1-73

SOLVENT WELD WASTE FITTINGS 88º BEND SOCKET/SPIGOT SN4 code 406 DIAM. ARTNR. EURO BOX 32 FF380 0,75 10/100 40 FF382 0,98 10/100 50 FF384 1,46 10/100 75 FF386 2,93 20 90 FF387 5,20 20 110 FF388 5,95 20 125 FF390 8,20 10 160 FF392 15,30 5 88º BEND 2 x SOCKET SN4 code 406 DIAM. ARTNR. EURO BOX 32 FF400 0,75 10/100 40 FF402 0,98 10/100 50 FF404 1,46 10/100 75 FF406 2,93 20 90 FF408 4,32 20 110 FF410 5,95 20 125 FF412 7,60 10 160 FF414 15,30 6 45º TEE 2 x SOCKET/SPIGOT SN4 code 406 DIAM. ARTNR. EURO BOX 50 FF422 3,34 25 75 FF424 4,76 10 110 FF426 8,20 20 45º REDUCING TEE 2 x SOCKET/SPIGOT SN4 code 406 DIAMETER ARTNR. EURO BOX 110 x 50 FF436 6,90 40 45º TEE 3 x SOCKET SN4 code 406 DIAM. ARTNR. EURO BOX 32 FF444 1,61 10/100 40 FF446 1,81 10/100 50 FF448 2,93 50 75 FF450 4,76 20 90 FF452 7,50 20 110 FF454 7,25 10 125 FF456 10,45 10 160 FF458 22,10 5 1-74 April 2018

SOLVENT WELD WASTE FITTINGS 45º AND 88º DOUBLE BRANCHE 3 x SOCKET 1 x SPIGOT SN4 code 406 TYPE DIAM. ARTNR. EURO BOX 45º Double branch 3 x socket, 1 x spigot 110 FF522 18,10 10 88º Double branch 3 x socket, 1 x spigot 110 FF523 14,80 15 45º REDUCING TEE 3 x SOCKET SN4 code 406 DIAM. ARTNR. EURO BOX 75 x 50 FF466 4,28 10-25 110 x 40 FF468 6,00 10-25 110 x 50 FF470 6,00 20 110 x 75 FF472 6,90 20 125 x 110 FF480 9,05 10 160 x 110 FF482 22,10 5 *160 x 125 FF484 22,10 8 88º TEE 2 x SOCKET/ 1 x SPIGOT SN4 code 406 DIAM. ARTNR. EURO BOX 50 FF504 3,59 25 75 FF506 4,28 10 110 FF508 9,50 20 88º TEE 3 x SOCKET SN4 code 406 DIAM. ARTNR. EURO BOX 32 FF524 1,61 100 40 FF526 1,81 100 50 FF528 2,93 50 75 FF530 4,28 20 90 FF532 6,85 20 110 FF534 6,75 10 125 FF536 8,00 10 160 FF538 20,45 5 April 2018 1-75

SOLVENT WELD WASTE FITTINGS 88º REDUCING TEE 3 x SOCKET SN4 code 406 DIAM. ARTNR. EURO BOX 75 x 40 FF542 3,85 20 75 x 50 FF544 3,85 20 110 x 40 FF546 6,00 25 110 x 50 FF548 6,00 20 110 x 75 FF550 6,65 20 *125 x 110 FF558 7,90 10 160 x 110 FF560 19,35 5 88, 2 x PUSH FIT SOCKET / 1 XPLAIN SOCKET SN4 code 406 DIAM. ARTNR. EURO BOX 110 x 50 FF568 8,10 20 EXCENTRIC REDUCERS SN4 code 406 DIAM. ARTNR. EURO BOX DIAM. ARTNR. EURO BOX 40 x 32 FF578 0,64 100 110 x 75 FF596 2,57 20 50 x 32 FF580 0,98 100 110 x 90 FF598 2,59 20 50 x 40 FF582 0,98 100 125 x 40 FF600 2,61 20 75 x 40 FF584 1,66 100 125 x 50 FF602 2,61 20 75 x 50 FF586 1,77 100 125 x 75 FF604 2,61 20 90 x 75 FF588 4,10 20 125 x 110 FF606 2,61 20 110 x 40 FF590 2,57 20 160 x 110 FF608 7,55 20 110 x 50 FF592 2,57 20 160 x 125 FF610 7,55 20 110 x 2x50 FF594 2,82 20 INSERT / REPAIR SOCKET FOR SEWER PIPE SOCKET / SPIGOT code 406 A real problem solver is the repair piece in 32, 40. 50,110 and 125 mm. The problem: a drainage pipe has been cut equal to the floor or wall. Chop away? Open the floor? No, it is possible with this repair piece. The accessory with socket and spigot fits in the pipe and from that point a further extension is possible! SOCKET x SPIGOT ARTNR. EURO 32 x 26 FF280 1,62 40 x 34 FF281 2,28 50 x 44 FF282 2,74 110 x 103 FF286 9,70 *125 x 118 FF287 9,95 1-76 April 2018

SOLVENT WELD WASTE FITTINGS ACCESS BRANCHE, SOCKET/SPIGOT SN4 code 406 DIAM. ARTNR. EURO BOX 110 FF614 12,05 10 125 FF616 15,00 10 ACCESS BRANCH, PUSHFIT SOCKET/SPIGOT SN4 code 406 DIAM. ARTNR. EURO BOX 110 FF620 12,05 10 125 FF622 16,45 10 SCREWED ACCESS CAP SN4 code 406 DIAM. ARTNR. EURO BOX 40/50 FF628 2,82 5 75 FF630 3,67 20 110 FF632 4,71 20 125 FF634 6,35 20 160 FF636 12,35 15 200 FF638 21,70 20 CAP FOR SPIGOT-END SN4 code 406 DIAM. ARTNR. EURO BOX 32 FF640 0,60 10/100 40 FF641 0,61 10/100 50 FF642 0,80 10/100 75 FF645 1,57 10/100 110 FF650 1,85 20 125 FF652 1,77 20 160 FF654 3,80 20 MORTARLID PE code 409 SOLVENT WELD WASTE FITTINGS Two-sided implementation: fits around the spigot-end and in the socket-end. DIAM. ARTNR. EURO BOX DIAM. ARTNR. EURO BOX 32 FK100 0,55 25/250 90 FK114 0,95 500 40 FK102 0,55 25/250 110 FK118 0,95 500 50 FK104 0,70 25/250 125 FK120 1,23 500 63 FK106 0,84 500 160 FK122 2,02 300 75 FK110 0,84 500 200 FK124 5,60 30 80 FK112 0,88 1000 April 2018 1-77

SOLVENT WELD WASTE FITTINGS CLAMP ACCESS SADDLE 110 X 50 MM code 406 SOLVENT WELD WASTE FITTINGS The rubber clamp ring is fastened with a union nut. The hole that has to be drilled, must be 57 mm. TYPE ARTNR. EURO Access saddle 110 x 50 mm (push-fit) FF669 9,20 SOLVENT ACCESS SADDLE code 406 The saddle is glued onto the pipe 110 to get an easy branch. DIAM. ARTNR. EURO BOX 110 x 40 FF666 2,98 200 110 x 50 FF668 2,67 200 UNIVERSAL SOLVENT ACCESS SIPHON TYPE M code 409 TYPE ARTNR. EURO BOX 32 mm FK180 4,62 150 40 mm FK182 5,45 100 * Device for additional air circulation. 32/40 mm FK222 9,85 20 FLOOR DRAINS 1-78 April 2018

FLOOR DRAINS FLOOR DRAIN NR. 402 code 409 ABS drain with bottom outlet, with bucket. Equipped with SS grating. Build-In-Height 187mm, waterlock 50mm, exhaust 75mm. SIZE ARTNR. EURO 200 x 200 FK200 55,80 FLOOR DRAIN NR. 403 code 409 ABS drain with side-inlet, with bucket. Equipped with SS grating. Build-In-Height 140mm. Upper-side to heart of outlet: 76mm, outlet 75mm. SIZE ARTNR. EURO 200 x 200 FK202 54,75 SHOCK-PROOF PVC FLOOR DRAIN code 409 Colour: lightgrey, shock-proof PVC, Lower end is as a spigot-end. SIZE ARTNR. EURO 150 x 150 bottom outlet 40/50 mm FK206 16,00 200 x 200 bottom outlet 63/75 mm FK208 24,10 250 x 250 bottom outlet 90/110 mm FK210 41,85 300 x 300 bottom outlet 100/110 mm FK212 52,65 FLOOR DRAIN WITH POLYETHYLENE LID & CAST IRON LID code 409 Round substructure. Bottom outlet spigot 75mm. TYPE ARTNR. EURO Polyethylene lid 200 x 200 FK216 15,90 Cast iron lid 200 x 200 FK220 34,45 Polyethylene lid Cast Iron lid BOTTLE GULLY & RECEIVER code 409 - Cast iron grating or lid. - Class X: normal traffic. Basic: light traffic. - Connection 125mm spigot, Ø315mm, height 640mm. - PVC receiver with shock-proof pvc stench-sealer and glassfibre reinforced bottom. et, impact-proof, colour: yellow. Unique connection between the top and bottom piece, the so called H-principle. The bottom piece can rotate in all directions. The top has been made extra stable with an extended spigot-end. Easy adjustable by means of PVC rings. With polyester floor. The Gully s have the Komo-mark according to NEN7057 and NEN7067, except for the heads with closed lid. TYPE ARTNR. EURO Cast iron head Basic excl. receiver FK401 129,00 Receiver for Basic FK430 89,00 * Cast iron head Class X excl. receiver FK400 129,00 Basic Class X April 2018 1-79

CHANNEL DRAINAGE PLASTIC DRAINAGE CHANNEL (PP) code 457 CHANNEL DRAINAGE Completely assembled lightweight elements, unbreakable and easy to connect to RWS drainage. Ideal for garagedoors, terraces, parking places and around ponds and swimming pools. Reinforced plastic gutter, available with galvanised grating or plastic grating. Sizes gutter with galvanised grating: L 1000 x B 130 x D 98mm. Sizes gutter with plastic grating: L 1000 x B 130 x D 115mm. Both gutters class A (max. 1500 kilo). - Gutterelements are joined by a socket/spigot connection. - Integrated footrests for easy installation. - The required build in measurements on the gutter are given. - In-/Output connections can be glued. Plastic grill are available in beige on demand. TYPE ARTNR. EURO Plastic Channel lightgrey 1 metre including galvanised grate (1) FD210 29,60 Plastic Channel black 1 metre including plastic design grate (2) FD230 29,60 Plastic Channel lightgrey 1 metre excluding plastic grate FD214 19,85 Swimming pool grate plastic lightgrey (L= 50 cm) (3) FD218 15,65 Begin/endpiece Ø110mm lightgrey (4) FD222 5,25 Begin/endpiece Ø110mm black (4) FD234 5,25 Bottom connection (5) FD224 6,80 4 5 2 3 1 STORADRAIN CHANNEL DRAINAGE code 457 Draining channels in fibreglassconcrete. Width 100mm internally, 125mm externally, height 115mm, class A (maximum 1.500 kilo capacity). Available to a width from 30 cm up to 60.000 kilo weight capacity! Please note: order the grating separately! Gratings also deliverable in Stainless Steel, copper and brass. TYPE ARTNR. EURO Gutter B=10cm L=100cm (excluding grating) FD101 26,85 Gutter B=10cm L = 50cm (excluding grating) FD105 21,55 Galvanised grating B=10cm L=100cm FD102 9,15 Galvanised grating B=10cm L=50cm FD106 10,30 Cast iron grating B=10cm L=50cm FD107 23,50 Anchorings bolts for the grating (2 per metre) FD120 4,87 Begin/endpiece FD108 8,95 Endpiece with exhaust 110 FD112 19,85 GULLYS HDPE SLIDE VALVE code 454 Economic slide valves for low pressure. Made of HDPE. 2 x spigot connection. For assembly with push-fit fittings. These valves are designed for thicker media and can leak when used in clear water applications. DIAM. ARTNR. EURO * 160 FC202 179,00 WAFIX SN4 PUSH-FIT 1-80 April 2018

WAFIX SN4 PUSH-FIT CLASS 41/SN4 PUSH-FIT FITTINGS Colour: RAL7037 middlegrey. Connection: push-fit, solid rubber. Colour: SN4 and SN8: KOMO-mark according to NEN7046. SN4 previous class 41. DOUBLE SOCKET SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF700 4,32 20 125 FF701 5,95 20 160 FF702 9,50 16 200 FF703 20,50 10 250 FF704 37,15 4 315 FF705 54,10 3 DOUBLE SOCKET SLIP SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF712 4,32 20 125 FF713 5,95 20 160 FF714 9,50 16 200 FF715 20,50 10 *250 FF716 37,15 4 *315 FF717 54,10 3 15º BEND SOCKET/SPIGOT SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF722 6,30 20 *125 FF723 7,95 20 15º BEND 2 x SOCKET SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF730 7,30 20 *125 FF731 7,85 20 30º BEND SOCKET/SPIGOT SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF734 6,85 20 April 2018 1-81

WAFIX SN4 PUSH-FIT 30º 2 x SOCKET SN4 code 436 DIAM. ARTNR. EURO BOX 0 110 FF744 7,30 20 125 FF745 10,35 20 45º BEND SOCKET/SPIGOT SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF750 6,30 20 125 FF751 7,95 20 45º BEND 2 x SOCKET SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF763 7,30 20 125 FF764 9,20 20 160 FF765 16,70 5 200 FF766 33,95 4 *250 short FF768 92,65 1 *315 short FF770 174,00 1 88º BEND SOCKET/SPIGOT SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF775 6,45 20 125 FF776 9,00 10 160 FF777 17,25 5 200 FF778 45,85 3 *250 short FF780 114,00 1 88º 2 x SOCKET SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF785 7,50 20 125 FF786 10,15 10 160 FF787 18,85 5 200 FF788 42,90 3 250 short FF790 131,00 1 *315 short FF792 218,00 1 1-82 April 2018

WAFIX SN4 PUSH-FIT 45º TEE 2 x SOCKET/ 1 x SPIGOT SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF796 9,25 10 *125 FF797 12,05 5 *160 FF798 30,65 4 45º TEE 3 x SOCKET SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF803 10,25 10 125 FF804 13,35 8 160 FF805 27,55 4 *200 FF806 53,80 4 *250 FF807 254,00 2 *315 FF808 390,00 1 45º REDUCING SOCKET 3 x SOCKET SN4 code 436 DIAM. ARTNR. EURO BOX 125 x 110 FF813 12,70 10 160 x 110 FF814 26,65 5 160 x 125 FF815 26,65 5 *200 x 160 FF817 50,00 4 88º TEE 2 x SOCKET/ 1 x SPIGOT SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF830 8,90 10 *125 FF831 11,35 10 88º TEE 3 x SOCKET SN4 code 436 DIAM. ARTNR. EURO BOX 110 FF837 9,90 10 125 FF838 11,70 10 160 FF839 25,85 5 200 FF840 49,75 3 *250 FF841 180,00 1 *315 FF842 308,00 1 April 2018 1-83

WAFIX SN4 PUSH-FIT 88º REDUCING TEE 3 x SOCKET SN4 code 436 DIAM. ARTNR. EURO BOX 125 x 110 FF847 12,15 10 160 x 110 FF848 23,95 5 *160 x 125 FF849 23,95 5 200 x 125 FF850 41,40 4 INSERT REDUCER SOCKET/SPIGOT EXCENTRIC SN4 code 436 DIAM. ARTNR. EURO BOX 110 x 125 FF863 6,15 20 110 x 160 FF864 11,10 20 125 x 160 FF865 11,50 20 125 x 200 FF866 26,40 5 160 x 200 FF867 27,20 5 REDUCER SOCKET/SPIGOT EXCENTRIC SN4 code 436 DIAM. ARTNR. EURO BOX *200 x 250 FF871 60,75 8 *250 x 315 FF872 83,75 1 CAP FOR SPIGOT-END SN4 code 406 DIAM. ARTNR. EURO BOX 110 FF650 1,85 20 125 FF652 1,77 20 160 FF654 3,80 20 200 FF656 5,05 10 250 FF658 10,85 10 315 FF660 14,20 15 400 FF662 36,55 8 *500 FF664 97,45 1 ACCESS BRANCH SOCKET/SPIGOT SN4 code 406 DIAM. ARTNR. EURO BOX 110 FF620 12,05 10 125 FF622 16,45 10 *160 FF624 26,00 5 1-84 April 2018