MOTOR CONNECTIONS MOTOR-DECONTACTOR & INDUSTRIAL PLUGS & SOCKET-OUTLETS hyconelec.co.za MARECHAL TECHNOLOGY
SAFE AND RELIABLE ELECTRICAL CONNECTIONS FOR YOUR MOTORS. MARECHAL ELECTRIC offers a range of products suited to your applications. The power supply to motors and industrial installations requires products that meet specific criteria and requirements. To satisfy the many needs linked to this activity, MARECHAL ELECTRIC provides you with a wide range of electrical connection solutions which reduce the time and means required for operations: Reliability Speed Flexibility Quality... always with the goal to ensure safety for staff and plant.
MARECHAL ELECTRIC TECHNOLOGY P. 4 DSN COMPACT AND WATERTIGHT DECONTACTOR P. 6 ONTENTS DS METAL DECONTACTOR P. 8 DB DISCONNECTABLE MOTOR SWITCH P. 10 STAR-DELTA 7 POLE DECONTACTOR PLUGS AND CONNECTORS P. 12 SP SINGLE POLE POWER CONNECTOR P. 14 DXN COMPACT ATEX DECONTACTOR P. 16 DX METAL ATEX DECONTACTOR P. 18 2 3
TECHNOLOGY MARECHAL ELECTRIC TECHNOLOGY The MARECHAL ELECTRIC industrial electrical power socket has a built-in switching function called a decontactor. This technology makes it possible to connect and disconnect motors in absolute safety, with the ease of Plug & Play. MARECHAL ELECTRIC industrial electrical power sockets provide unequalled strength over time and guarantee fast and safe operation during maintenance work. They comply with the CEI EN 60309-1 standard, the European Low Voltage Directive and the ministerial order of 20/12/2011 covering movable electrical appliances and their conditions of connection and use. Load-break release button Watertight seal: IP66/IP67 protection against water-pressure hoses Safety shutter prohibiting touching the contacts: user safety (IP4X/IPXXD) Silver-nickel butt contacts: excellent electrical conductivity and performance Spring-loaded terminals: resistance to vibrations Anti-corrosion treatment Central earth contact: no danger of wiring error Glass-reinforced GRP-type polyester casing: excellent mechanical strength Integral cable gland with rangetake seals and cable anchoring DECONTACTOR technology: tested safety A socket and switch in one compact unit Simply pressing the button once cuts off the current and eliminates all risk of electrical arcing. The plug then withdraws automatically and the appliance is off-load. The safety of staff is guaranteed at all times. Fast and safe connection under any circumstances The plug is held in the socket by a spring loaded latch. Once inserted, you are sure that the appliance will start up properly and that the plug will be watertight. When the plug is pulled out, a safety shutter, situated in the front of the socket, prevents access to the live parts. IP66/IP67 sealing IP66/IP67 sealing is automatic as soon as the plug is inserted or once the cover is closed manually. hyconelec.co.za
FASTER, SAFER, EASIER. TECHNOLOGY Connection quality and life expectancy MARECHAL products are fitted with spring-loaded contacts providing a permanent and durable contact. The silver-nickel tips at the end of the contacts provide exceptional connection quality and excellent resistance to wet and corrosive environments, even after years of use. Thanks to their overload tolerance of 8 times the normal current up to 1 minute, the DECONTACTOR plugs are especially suitable for connecting motors, even with frequent restarting. Improvement in control: integration of auxiliary contacts This option enables the ON/OFF position of the power socket to be signalled to the Centralised Technical Management. It can also serve to transmit data such as temperatures from an isothermal sensor. In the event of severe applications [high currents in dc, etc] these contacts can be used to control a switch. User safety: mechanical locking Optional locking systems prevent accidental power supply to a machine during maintenance,and fit perfectly into your consignment procedures. Once the DECONTACTOR TM is safely disconnected, you can mechanically interlock the two parts already physically separated: (Lock-OFF) Plug only Padlock placed directly onto the plug or a lock-out hasp: add 839 to the connector s part number. Padlock and padlocking device not supplied. Closed socket only Padlock or lock-out hasp placed onto the provided bar: add 844 to the socket s part number. The padlock placed directly onto the socket s latch must be the right size. Connections are thereafter impossible, making it absolutely safe for users. Connnected socket and plug Padlock or lock-out hasp placed onto the provided bar: add 844 to the socket s part number. The padlock placed directly onto the socket s latch must be the right size. Connections are thereafter impossible. 24 Keying positions 24 keying positions are possible to differentiate between dissimilar voltages. Some of these are reserved for the creation of specific systems: EXAMPLES 1 2 1 2 ET ET 2 ET 3 N Position 01 380-440 V 50 Hz 3 1 Position 19 Position 05 660-690 V 50 Hz Free [specific to motor applications] 3 4 5
DSN COMPACT AND WATERTIGHT DECONTACTOR 20 A / 32 A / 63 A Covering sizes from 20 to 63 A, DSN DECONTACTOR plugs are distinguished by their small footprint. The socket + plug combination is automatically IP66/IP67 as soon as the plug is inserted or once the cover is closed manually. Automatic IP66/IP67 Built-in AC-22 and AC-23 switching capability Shock-resistant GRP casing SPECIFICATION Plug and socket-outlet with incorporated load-breaking capacity AC-22 / AC-23, IP66/IP67 without additional operation, safety shutter (socket IP4X/IPXXD) silvernickel butt contacts and metallic braid. MAIN FEATURES DSN1 DSN3 DSN6 Rated current (In) 20 A 32 A 63 A Umax 500 V 690 V 1 000 V AC-22 switching capability 20 A / 500 V 32 A / 690 V 50 A / 690 V AC-23 switching capability 20 A / 400 V (5,5 kw) 32 A / 400 V (7,5 kw) 63 A / 400 V (18,5 kw) Auxiliary contacts - 2 4 Keying positions (1) 24 for all DSN IP protection lid closed IP66/IP67 for all DSN IP protection connected plug IP66/IP67 for all DSN Ambient temperature -40 C to +60 C for all DSN Shock resistance IK08 for all DSN Flexible wiring [min. max.] 1-2,5 mm 2 2,5-6 mm 2 6-16 mm 2 Stranded wiring [min. max.] 1,5-4 mm 2 2,5-10 mm 2 10-25 mm 2 Short circuit current [Icc] 10 ka for all DSN (1) To distinguish between different power supplies and applications. hyconelec.co.za
DSN EXAMPLE OF CONFIGURATION WALL MOUNTING SOCKET DSN1 PLUG DSN1 30 GRP wall box 611A053 Straight GRP handle 611A013 Socket-outlet 6114013 Inlet 6118013 SOCKET-OUTLET female INLET male 50 Hz voltage Polarity Part number Part number DSN1 (20 A) 380-440 V 3P+E 6114013 6118013 DSN3 (32 A) 380-440 V 3P+E 6134013 6138013 380-440 V 3P+E+2aux 6134013972 6138013972 380-440 V 3P+E 6164013 6168013 DSN6 (63 A) 380-440 V 3P+E+2aux 6164013972 6168013972 380-440 V 3P+E+4aux 6164013264 6168013264 For other voltages, polarities, locking options and specific keying positions, please contact us. BOXES Without cable glands SLEEVES Entry 30 GRP wall box GRP box + 70 GRP sleeve* DSN1 M20 611A053 51AA058 M20 613A053 DSN3 51BA058 M25 613A083 DSN6 M25 616A083 51CA058 30 inclined GRP 70 inclined GRP DSN1 611A027 51AA757 DSN3 613A027 51BA757 DSN6 616A027 51CA757 * Without drilling and without cable gland. ACCESSORIES AND OPTIONS HANDLE Straight GRP DSN19-18 mm611a013 DSN35-21 mm613a013 DSN6 10-30 mm616a013 10-30 mm 616A473* Locking with shaft for 3 padlocks Ø 4mm (padlocks not supplied): socket part no. + 844 Lockable plug: inlet part no. + 839 Inlet cap: DSN1: 611A426 DSN3: 613A126 DSN6: 616A126 180 opening lid Socket part no. + 10 Self-returning lid Socket part no. + R 180 opening and self-returning lid Socket part no. + 18 * With built-in finger draw plate [recommended for inline connections]. 6 7
DS METAL DECONTACTOR 30 A / 50 A / 90 A / 150 A / 250 A Covering sizes from 30 to 250 A [sizes covered in the 60309-1 standard], the DS range is the most comprehensive range of DECONTACTOR plugs. Sockets and inlets exist in the metal version starting from 90 A. Safe load-breaking up to 250 A Safety shutter GRP or metal casing SPECIFICATION IP54/ IP55 Plug and socketoutlet with incorporated AC-22 / AC-23 load-breaking device, safety shutter (IP4X/IPXXD socket-outlet), silver-nickel butt contacts with metallic braid. MAIN FEATURES DS6 GRP DS9 GRP DS2 METAL Rated current (In) 90 A 150 A 250 A Umax 1 000 V 1 000 V 1 000 V AC-22 switching capability 63 A / 690 V 150 A / 400 V 250 A / 400 V AC-23 switching capability 90 A / 400 V (37 kw) 100 A / 440 V (50 kw) 160 A / 440 V (75 kw) Auxiliary contacts 4 6 7 Keying positions (1) 24 24 12 IP protection lid closed IP55 IP66/IP67 IP55 IP protection connected plug IP54 IP66/IP67 IP54 Ambient temperature -40 C to +60 C for all DS Shock resistance IK08 IK08 IK09 Flexible wiring [min. max.] 10-25 mm 2 25-70 mm 2 25-70 mm 2 Stranded wiring [min. max.] 10-35 mm 2 25-95 mm 2 25-95 mm 2 Short circuit current [Icc] 10 ka for all DS (1) To distinguish between different power supplies and applications. Note: DS6 and DS9 are also available in metal. The DS2 only exists in metal. hyconelec.co.za
DS EXAMPLE OF CONFIGURATION WALL MOUNTING SOCKET DS9 PLUG DS9 70 metal box 879A053 Elastomer handle 659A013D45 Socket-outlet 3194013 Inlet 3198013 SOCKET-OUTLET female INLET male DS6 (90 A) DS9 (150 A) DS2 (250 A) 50 Hz voltage Polarity Part number Part number 380-440 V 3P+E 3164013 3168013 380-440 V 3P+E+2aux 3164013972 3168013972 380-440 V 3P+E+4aux 3164013264 3168013264 380-440 V 3P+E 3194013 3198013 380-440 V 3P+E+2aux 3194013262 3198013262 380-440 V 3P+E+4aux 3194013264 3198013264 380-440 V 3P+E+6aux 3194013976 3198013976 380-440 V 3P+E 3924013 3928013 380-440 V 3P+E+2aux 3924013972 3928013972 For other voltages, polarities, locking options and specific keying positions, please contact us. BOXES Without cable glands SLEEVES Entry Metal box + 70 metal sleeve Metal box + 60 metal sleeve GRP box + 70 GRP sleeve* DS6 M40 876A053 51DA058 DS9 M50 879A053 DS2 M63 392A053 70 Inclined metal 60 Inclined metal 70 inclined GRP DS6 876A087 51DA757 DS9 879A087 DS2 392A027 * Without drilling and without cable gland. ACCESSORIES AND OPTIONS HANDLES Locking with shaft for 3 padlocks Ø 8mm (padlocks not supplied): socket part no. + 844 Lockable plug: inlet part no. + 839 DS6 Straight GRP 13-35 mm 316A013 13-35 mm 316A473* Straight elastomer Inlet cap: DS6: 316A126 DS9: 319A126 DS2: 312A126 DS9 35-45 mm 659A013D45** DS2 45-49 mm 352A013D49** * With built-in finger draw plate [recommended for inline connections]. ** D35 = Cable diameter 25 to 35 mm - D45 = Cable diameter 35 to 45 mm. D49 = Cable diameter 45 to 49 mm. 180 opening lid Socket part no. + 10 Self-returning lid Socket part no. + R 180 opening and self-returning lid Socket part no. + 18 8 9
DB DISCONNECTABLE MOTOR SWITCH 7 KW / 22 KW / 45 KW DB motor switches combine the functions of a motor disconnect and a power socket. The DB can be safely disconnected on load. AC-3 load-breaking switch for motors IP66/IP67 as standard Impact resistant metal casing SPECIFICATION IP66/IP67 disconnect motor switch - AC-3 category according to IEC EN 60947-3 standard. MAIN FEATURES DB3 DB6 DB9 Rated current (In) 40 A 75 A 125 A Umax 690 V 690 V 690 V AC-3 load-break capability 7,5 kw 22 kw 45 kw Keying positions (1) 24 for all DB IP protection lid closed IP66/IP67 for all DB IP protection connected plug IP66/IP67 for all DB Ambient temperature -40 C to +60 C for all DB Shock resistance IK09 for all DB Flexible wiring [min. max.] 2,5-6 mm 2 10-25 mm 2 16-50 mm 2 Stranded wiring [min. max.] 2,5-10 mm 2 16-35 mm 2 25-70 mm 2 Short circuit current [Icc] 200 ka for all DB (1) To distinguish between different power supplies and applications. INFO + Mechanical locking of the DB From left to right: Padlocked in OFF position Padlocked in ON position Socket-outlet padlocked with closed cover Inlet padlocked hyconelec.co.za
DB EXAMPLE OF CONFIGURATION WALL MOUNTING SOCKET DB3 PLUG DB3 70 metal box 873A053 Straight GRP handle 873A013 Socket-outlet 8734013 Inlet 8738013 SOCKET-OUTLET female INLET male DB3 (40 A) DB6 (75 A) DB9 (125 A) 50 Hz voltage Polarity Part number Part number 380-440 V 3P+E 8734013 8738013 380-440 V 3P+E+2aux 8734013172 8738013172 380-440 V 3P+E 8764013 8768013 380-440 V 3P+E+2aux 8764013172 8768013172 380-440 V 3P+E 8794013 8798013 380-440 V 3P+E+4aux 8794013264 8798013264 For other voltages, polarities, locking options and specific keying positions, please contact us. BOX Without cable glands SLEEVE Entry Metal box + 70 metal sleeve DB3 M25 873A053 DB6 M40 876A053 DB9 M50 879A053 DB3 DB6 DB9 70 Inclined metal 873A087 876A087 879A087 HANDLES ACCESSORIES AND OPTIONS Straight GRP DB310-30 mm 873A013 DB613-35 mm 876A013 Straight elastomer DB935-45 mm 659A013D45* * D35 = Cable diameter 25 to 35 mm - D45 = Cable diameter 35 to 45 mm. D49 = Cable diameter 45 to 49 mm. Padlocking device 1 to 6 padlocks 873A541 Inlet cap: DB3: 873A126 DB6: 876A126 DB9: 879A126 10 11
STAR-DELTA 7 POLE DECONTACTOR PLUGS AND CONNECTORS FROM 30A TO 150A Thanks to their silver-nickel tips at the end of the contacts these DECONTACTOR plugs are designed to resist repeated overloads and are especially suitable for reliable motor connections, even with frequent re-starting. Connection of star-delta motors Connection of motors with two speed cycles Simpler and safer than fixed wiring Watertight MAIN FEATURES DN9C DSN7C3 DS7C3 METAL DN7C6 DS7C9 Imax per phase 30 A 32 A 50 A 90 A 150 A Umax 415 V 500 V 500 V 415 V 500 V AC-22 switching capability 30 A / 415 V 32 A / 500 V 50 A / 500V 90 A / 415 V - Wiring (terminals) Screw-type for the whole range Auxiliary contacts 2-3 - 3 Keying positions (1) 2-5 - - IP protection lid closed IP55 IP66/IP67 IP55 IP55 IP55 IP protection connected plug IP54 IP66/IP67 IP54 IP54 IP54 Ambient temperature -40 C to +60 C for the whole range Shock resistance IK09 IK08 IK09 IK09 IK09 Flexible wiring [min. max.] 1-6 mm 2 2,5-6 mm 2 2,5-10 mm 2 10-25 mm 2 16-50 mm 2 Stranded wiring [min. max.] 1,5-10 mm 2 2,5-10 mm 2 2,5-16 mm 2 10-35 mm 2 16-70 mm 2 (1) To distinguish between different power supplies and applications. hyconelec.co.za
STAR-DELTA EXAMPLE OF CONFIGURATION WALL MOUNTING SOCKET DS7C3 PLUG DS7C3 30 metal box 396A653 Straight GRP handle 316A013 Socket-outlet 3934561 Inlet 3938561 SOCKET-OUTLET female INLET male Umax (V) / Imax (A) Polarity Part number Part number DN9C (30 A) 415 / 30 6P+E 1914061 1918061 415 / 30 6P+E+2aux 1914081262 1918081262 DSN7C3 (32 A) 500 / 32 6P+E 6134061 6138061 500 / 50 6P+E 3934561 3938561 DS7C3 (50 A) 500 / 50 6P+E+2aux 3934561172 3938561172 500 / 50 6P+E+3aux 3934561263 3938561263 DN7C6 (90 A) 415 / 90 6P+E 1964061 1968061 500 / 150 6P+E 3994061 3998061 DS7C9 (150 A)* 500 / 150 6P+E+2aux 3994061172 3998061172 * Connector without circuit breaker capacity. BOXES Without cable glands SLEEVES Metal box + 70 metal sleeve Metal box + 60 metal sleeve GRP box + 70 GRP sleeve* 70 Inclined metal 60 Inclined metal 30 inclined GRP Entry DN9C 873A087 DN9C M25 873A053 DSN7C3 613A027 DSN7C3 51BA058 DS7C3 876A087 DS7C3 M40 876A053 DN7C6 879A087 DN7C6 M50 879A053 DS7C9 392A027 DS7C9 M63 392A053 * Without drilling and without cable gland. HANDLES DN9C Straight GRP 10-30 mm 191A013 10-30 mm 191A473* Straight elastomer DSN7C35-21 mm 613A013 DS7C3 13-35 mm 316A013 13-35 mm 316A473* DN7C6 35-45 mm 659A013D45** DS7C9 45-49 mm 352A013D49** * With built-in finger draw plate [recommended for inline connections]. ** D35 = Cable diameter 25 to 35 mm - D45 = Cable diameter 35 to 45 mm. D49 = Cable diameter 45 to 49 mm. ACCESSORIES AND OPTIONS Locking with shaft for 3 padlocks Ø 8mm (Ø 4mm for the DSN7C3) ) (padlocks not supplied): socket part no. + 844 Lockable plug: inlet part no. + 839 Inlet cap: DN9C: 191A126 DSN7C3: 613A126 DS7C3: 316A126 DN7C6: 196A126 DS7C9: 312A126 180 opening lid Socket part no. + 10 Self-returning lid Socket part no. + R 180 opening and self-returning lid Socket part no. + 18 12 13
SP SINGLE POLE POWER CONNECTOR 700 A / 1 000 V Thanks to the butt-contact technology the SP single pole connector accepts a permanent current of 700 A / 1 000 V ac or 1500 V dc [connection with 70 to 400m² conductors]. Up to 700 A / 1 000 V Automatic IP66/IP67 sealing Electromechanical interlocking system MAIN FEATURES SP Rated current (In) 700 A For higher currents, contact us Maximum a.c. voltage 1 000 V Maximum d.c. voltage 1500 V Keying positions mechanical [5] and visual IP protection lid closed IP66/IP67 Ambient temperature -40 C to +60 C Shock resistance IK08 Flexible wiring [min. max.] 50-400 mm 2 Short circuit current [Icc] 20 ka for 250 ms Number of operations 2000 Pre-wired pilot circuit 6 A / 250 V hyconelec.co.za INFO + SP Characterisation Allowable current according to conductor cross-section at 30 C ambient temperature Maximum permanent allowable current in the SP after 2 000 operations depending on cable cross-section Maximum intensity of permanent current specified by the cable manufacturers to maintain a conductor core temperature < 85 C Maximum intensity of permanent current specified by the NFC 15-100 or the IEC 60 364-5-52 standards to maintain a conductor core temperature < 70 C I max (A) 750 650 550 450 350 250 70 95 120 150 185 240 300 400 Section (mm 2 )
SP EXAMPLE OF CONFIGURATION INCLINED SOCKET SP PLUG SP 45 metal inclined sleeve 454A027 Straight handle 454A753 Socket-outlet 454400N Inlet 454800N SOCKET-OUTLET female Without lug INLET male Without lug Type European colour code* Part number Part number L1 Brown 45440014548001 L2 Black 4544002 4548002 L3 Grey 4544003 4548003 Neutral Blue 454400N 454800N Earth Green 454400T 454800T Pole + Red 454400P 454800P Pole - Black 454400M 454800M * Part-numbers valid for Europe and Japan. For other countries: padd the suffix : P80 for the USA / P67 for Australia / P40 for the UK and South-Africa. LUGS Lug choice depends on the cable: the cross-section of the flexible cable mentioned in the table below is for information only. Please check dimensions as these may vary according to cable types and manufacturers. Wiring (mm 2 ) Straight with hole Straight threaded M12* Internal diameter (mm) Flexible Rigid Part number Part number 50 70 454A50C 454A50D 11 70 95 454A70C 454A70D 13,1 95 120 454A95C 454A95D 14,5 120 150 454A12C 454A12D 16,2 150 185 454A15C 454A15D 18 185 240 454A18C 454A18D 20,6 240 300 454A24C 454A24D 23,1 300 400 454A30C 454A30D 26,1 400 500 454A40C 454A40D 29,2 * Wiring with crimping lugs, according to NF C20-130 standard (for VDE 0220 standard, please contact us). Crimping: double hexagonal crimping is recommended. SLEEVE* 45 Inclined metal HANDLE Straight 454A027 * The inclined sleeve is recommended to reduce cable weight effect. 17-38 mm 454A753 35-48 mm 454A783 14 15
DXN COMPACT ATEX DECONTACTOR 20 A / 32 A / 63 A DXN DECONTACTOR plugs are designed for hazardous areas, with Ex de protection mode. They comply with the ATEX 94/9/ CE Directive. They can be used in zones 1 & 2 (Gas) and zones 21 & 22 (Dust). They are certified according to IECEx standards. Automatic IP66/IP67 sealing Integrated load-breaking switch Compact and strong design High performance GRP casing SPECIFICATION IP66/IP67 plugs and socket-outlets with Ex «de» protection mode for hazardous areas (ATEX) with incorporated load-breaking switch. MAIN FEATURES DXN1 DXN3 DXN6 Rated current (In) 20 A 32 A 63 A Umax 550 V 750 V 750 V Auxiliary contacts - 2 2 Keying positions (1) 24 for all DXN IP protection lid closed IP66/IP67 for all DXN IP protection connected plug IP66/IP67 for all DXN Ambient temperature -40 C to +60 C for all DXN Shock resistance IK08 for all DXN Flexible wiring [min. max.] 1-4 mm 2 2,5-10 mm 2 6-16 mm 2 Stranded wiring [min. max.] 1,5-6 mm 2 2,5-16 mm 2 6-25 mm 2 Protection mode de for all DXN ATEX zones zones 1 and 2 [Gas] and zones 21 and 22 [Dust] (1) To distinguish between different power supplies and applications. INFO + B2X junction boxes This box can be equipped with: Two DXN1 with 30 inclined sleeve, or One DXN1 & one DXN3 with 30 incl. sleeves, or One DXN6 with 70 inclined sleeve. INFO + DXN mechanical locking Optional locking of the female socket-outlet in the ON/OFF positions by a padlock bar [padlock not included]. hyconelec.co.za
DXN EXAMPLE OF CONFIGURATION WALL MOUNTING SOCKET DXN3 PLUG DXN3 70 GRP wall box 253AB58 Straight GRP handle 253A753 Socket-outlet 2534013 Inlet 2538013 SOCKET-OUTLET female INLET male 50 Hz voltage Polarity Part number Part number DXN1 (20 A) 380-440 V 3P+E 2514013 2518013 DXN3 (32 A) 380-440 V 3P+E 2534013 2538013 380-440 V 3P+E+2aux 2534013972 2538013972 DXN6 (63 A) 380-440 V 3P+E 2564013 2568013 380-440 V 3P+E+2aux 2564013972 2568013972 For other voltages, polarities, locking options and specific keying positions, please contact us. BOXES With Ex cable glands included SLEEVES PE Ex 30 GRP wall box 70 GRP wall box* DXN1 M20 251AB53 251AB58 DXN3 M25 253AB5325P 253AB58 DXN6 M25 256AB53 256AB5825P * For alternatives with earth continuity or multiple cable glands: contact us. 30 inclined GRP 70 inclined GRP DXN1 251A027 251A757 DXN3 253A027 253A757 DXN6 256A027 256A757 ACCESSORIES AND OPTIONS HANDLE With Ex cable glands included Straight GRP DXN110-14 mm 251A753 DXN312-18 mm 253A783 DXN616-25 mm 256A25332P * For alternatives with earth continuity: contact us. Locking with shaft for 3 padlocks Ø 4mm (padlocks not supplied): socket part no. + 844 Inlet cap: DXN1: 251A126 DXN3: 253A126 DXN6: 256A126 180 opening lid Socket part no. + 10 Self-returning lid Socket part no. + R 180 opening and self-returning lid Socket part no. + 18 16 17
DX METAL ATEX DECONTACTOR 20 A / 32 A / 63 A / 125 A / 200 A DX DECONTACTOR plugs are designed for hazardous areas, with Ex de protection mode. They comply with the ATEX 94/9/ CE Directive. They can be used in zones 1 & 2 (Gas) and zones 21 & 22 (Dust). They are certified according to IECEx standards. Automatic IP65 sealing Integrated load-breaking switch Locking by keying axis in the ON/OFF positions SPECIFICATION IP65 plug and socket-outlet with Ex «de» protection mode for hazardous areas (ATEX) with incorporated loadbreaking switch. MAIN FEATURES DX1 DX3 DX6 DX9 DX2 Rated current (In) 20 A 32 A 63 A 125 A 200 A Umax 750 V for all DX Keying positions (1) 12 for all DX IP protection lid closed IP65 IP65 IP65 IP65 IP65 IP protection connected plug IP65 IP65 IP65/IP66 IP65/IP66 IP65/IP66 Ambient temperature -25 C Ta +60 C (DX1 & DX3) -40 C Ta +60 C (DX6, DX9 & DX2) Shock resistance IK10 for all DX Flexible wiring [min. max.] 2,5-10 mm 2 2,5-10 mm 2 16-50 mm 2 50-70 mm 2 70 mm 2 Stranded wiring [min. max.] 2,5-10 mm 2 2,5-10 mm 2 16-50 mm 2 50-70 mm 2 70 mm 2 Protection mode de for all DX ATEX zones zones 1 and 2 [Gas] and zones 21 and 22 [Dust] (1) To distinguish between different power supplies and applications. INFO + DX mechanical locking Standard locking of the female socket-outlet in the ON/OFF positions by a padlock bar [padlock not included] hyconelec.co.za
DX EXAMPLE OF CONFIGURATION WALL MOUNTING SOCKET DX9 PLUG DX9 90 wall box 269AB53 Socket-outlet 2694013 Plug 2691013 SOCKET-OUTLET female PLUG male INLET male 50 Hz voltage Polarity Part number Part number Part number DX1 (20 A) 380-440 V 3P+E 2624013 8-13 mm 2621013 2628013 DX3 (32 A) 380-440 V 3P+E 2634013 9-16 mm 2631013 2638013 DX6 (63 A) 380-440 V 3P+E 2664013 12-21 mm 2661013 2668013 DX9 (125 A) 380-440 V 3P+E 2694013 23-35 mm 269101350M 2698013 DX2 (200 A) 380-440 V 3P+E 2694013Z0357 36-48 mm 2691013Z0357 2698013Z0357 For other voltages, polarities, locking options and specific keying positions, please contact us. BOXES With Ex cable glands included* HANDLE With Ex cable glands included* Cable gland 90 metal wall box DX1 M25 262AB5325M DX3 M32 263AB5332M DX6 M40 266AB5340M DX9 M50 269AB5350M DX2 M63 269AB53Z0357 * For alternatives with earth continuity: contact us. Cable gland Straight metal handle DX1 M25 262A96325M DX3 M32 263A96332M Straight metal handle DX6 M40 266A96340M DX9 M45 269A96350M DX2 M63 269A963Z0357 * For alternatives with earth continuity: contact us. 18 19
MARECHAL ELECTRIC GROUP HYCON MARECHAL TECHNOLOGY PO BOX 13875, Witfield, 1467 Unit A1 Harvard lane Aero Star Business Park Jet Park Road, Jet Park, South Africa Tel: +27 11 894 7226/7/8 Fax: 086 604 1778 Email: hycon@hyconelec.co.za Hyconplamot201403 - All rights reserved hyconelec.co.za