TABLES, CARTS, SERVICE CARRIERS, & SHELVING

TABLES, CARTS, SERVICE CARRIERS, & SHELVING EKO LT BOLT TOGETHER TABLE SYSTEM Tables Discovery Discovery LT EKO EKO LT Vision Over head service systems Lynx Vision Shelving systems Pharma Reagent Carts Pedestals PO Box 141261 Grand Rapids MI 49514 Ph: 616-481-8550 www.labcase.com

TABLE OF CONTENTS: 1. Materials 2. Discovery Tables Discovery LT Tables EKO Tables EKO LT Tables Vision Tables 3. Carts 4. Lynx Overhead Service Centers 5. Vision Overhead Service Centers 6. Shelving Systems 7. Shelving Systems Accessories Materials: Frame tubes are typically types ASTM A-513 material with the acceptation of 11 gauge material or 14. This material will be ASTM A-500 Grade B type. Most all our table systems use this type of carbon steel material. The acceptation is the stainless steel versions of all these tables and carts. These systems use type 304 stainless steel ASTM A276, A554, & 580 along with Federal QQS-763 and AMS 5639 requirements. Type 316 and 316L materials fall under the same requirements with the acceptation of AMS 5648 requirements. The sheet material used to form parts is made from hot rolled furniture grade steel. Gauges range from 22 up to 7gauge for structural parts. The sheets have a thickness tolerance range of.0508 to.0449 for 18 gauge as a reference. Ranges are similar for 20, 16, 14, and 11 gauge steel. Frames are typically welded solid or supplied with a bolt together leg systems. All welds are cleaned and prepped for powder coating finish. If stainless steel material is used they are electrically and acid cleaned along with buffed and polished. Standard loads for basic tables are 750 lbs to 1,250 lbs. with special use tables manufactured to customer specifications. Carts are manufactured to handle 500 lbs to 900 lbs or special built systems to meet customer requirements. Gauges and materials similar to table manufacturing. Standard fixed heights of 29, 33 ADA, and 35 h with custom set heights available. Drawers are either inset style or overlay customer to specify when placing there order. All drawers use ball bearing slides typical unless specified. Drawers and pull out shelves are rated for 100 lbs per pair of drawer slides. Power lift systems are 120v 60hz supplied with power cord and controller for up down action. Loads up to 1,000 lbs. with options for custom built lift systems for heavier applications range 8 to 12. Hydraulic lift hand cranking tables can handle 500 up to 1000 lbs with 5 to 10 ranges.

Tables: Standard EKO and Discovery systems tables Bolt together and welded systems available. Fixed heights or height adjustable systems are available for all types. These These tables have options for various work top materials from stainless steel to laminate types. Tables are powder coated frames unless stainless steel material has been requested. Other options for these table groups include leveling feet and caster types and seismic brackets or levelers. Casters are non-marking & NSF approved, and locking type casters. Lift kits can be provided with any table system as well just specify when requesting information. Discovery fold dow n frame design manual adjusting EKO w elded frame table w / overlay drawer formed front matching pedestals Most table systems have the added option Of storage such as built in drawers or suspended versions of storage. The option shown to the left uses an apron that allows for a built in drawer system. Overlay formed front is shown. Options include PVC pull and Inset drawer styles with different styles of grabs. When drawers are required we use ball bearing type drawer slides rated for 100lbs.. Table loads range from 500lbs to 1,500 lbs or specials. All tables have corner welded gussets 14 to 11 gauge material reinforced. Lower tube braces are also typically added to provide extra strength. Feet inserts are typically used unless specified otherwise. Typical insert uses 3/8-16 NSF style threads. Power lift and hydraulic table lift packages for most styles of tables and bench systems. The version shown to the left is our Discovery Systems using a two pillar style lift with a 360 degree access to the table. This system has lift controls on both sides of the table to help with ease of use. All power lift systems use a standard 120v 60hz plug in power source. Leg systems can use up to 10 plugged into one controller for special applications. Our standard systems use either the pillar two leg or a 4 leg system. The hydraulic version uses a hand crank under mount height adjuster. Ranges are typically 6 to 12 in height. Lift ranges are from 500 to 1000 lb lift capacities. These systems are great to meet ADA requirements or to add ergonomic comfort. Mobile Pow er lift table Discovery double sided 120v 60hz (48 x36 with 10 lift)

Special design Tables and Bases Special frame sizes are available as w ell as specific types of construction from all w elded to a bolt together framed table system. Special applications and sizes are designed for specific customer needs. Contact your sales person for details All w elded frame table tw o tier upper counter top and low er full shelf. Counter top materials are selected based on use. Sizes range from 30 w up to 120 w / depths from 24 up to 60. 2TT-100-### (Add size of table) 46 X46 All w elded tube frame w / supports 72 x24 All w elded table w / lower shelf EKO Warming Tables all w elded with Part number: WTL-200-010- ADD SIZE Stock sizes 48, 60, 72, and 96 Standard heights are 36 standing, 30 for seated and 34 for ADA height. Balance tables: Solid epoxy resin balance tables designed to reduce vibration for microscope usage or delicate instruments. #BTL-030-EPY 30 W X 30 H X 30 D #BTL-036-EPY 36 W X 30 H X 30 D Warming tables Hospital use Epoxy resin balance table Vision Computer Table all w elded with under mount pow er option and vertical w ire management. Leveling feet included. Part number: STT-030-060-P1 Stock sizes 48, 60, 72, and 96 EKO Draft Table all w elded frames w ith adjustable sw ing height w ork surface. Part number: DET-042-036 Table includes surface and frame with all other attachments by others. Part number: Student training table Vision systems Drafting-tech table adjustable w ork surface EKO Table all w elded with double flush draw ers. Leveling feet standard NSF type housed in an all w elded assembly. Manual height adjustable legs w ith leveling feet. Part number: EKO-HAT-072-LT Stock sizes 36, 48, 60, 72, and 96 Discovery Study Table all w elded w ith under mount cantilever supports. Fixed height either ADA or 30 seated heights. Part number: DST-048-030-CNT Stock sizes 48, 60, & 72 Table EKO LT w / flush drawer height adjustable Discovery LT cantilever study tables

SPECIAL TABLES EKO Table all w elded with under mount shelf mobile system. Casters are locking NSF type. Manual height adjustment. Part number: ETS-AHT-072 Stock sizes 48, 60, 72, and 96 Discovery Table Optics Lab Mobile lab table w/ power and single drawer storage double sided. Part number: OCT-072-036-MT Stock sizes 48, 60, 72, and 96 Mobile EKO Table system w / bottom ½ shelf Optics mobile training tables w ith single draw er storage Vision Power lift Table all w elded with finger touch controls. 120v 6 pow er cord included. Leveling feet included. Part number: VPL-060-BCC-30 Stock sizes 48, 60, 72, and 96 EKO Hood Hydraulic lift system. Steel frame w ith bolted in lift system. Frame is all w elded steel w ith a powder coat finish. Part number: EHL-048-HCS-S Stock sizes 48, 60, 72, and 96 for most fume hoods Pow er lift adjustable height table w ith privacy panels Hand crank height adjustable fume hood base frame EKO Table Hydraulic lift system. Steel frame w ith bolted in lift system. Frame is all w elded steel w ith a powder coat finish. Part number: EHL-048-STH-S Stock sizes 36, 48, 60, 72, and 96 EKO SSR Table all w elded stainless steel round tubing w / NSF casters or leveling feet. All stainless cleaned after w elding. Part number: ESS-096-FHT-SS Stock sizes 48, 60, 72, and 96 Hand crank EKO table frame table Stainless steel tube frame tables w / leveling feet EKO SS Table all w elded stainless steel square tubing w / NSF casters or leveling feet. All stainless cleaned after welding. Part number: EST-060-036-SS Stock sizes 48, 60, 72, and 96 EKO Table w ith apron all w elded EKO Pedestal Welded steel tube frames to support tables or counter top runs. Leveling feet included or systems w ith telescoping adj. ht. tubes Part number: EPD-029-002-S Stock heights range from 29 h, 33, or 35 Table support end frames w / leveling feet

EKO Table all w elded with under mount storage mobile system. Casters are locking NSF type. Part number: EMT-060-036-2US Stock sizes 48, 60, 72, and 96 Soldering tables lined with nonasbestos panels. All w elded tube frames w ith leveling feet. Pow der coat finish typical w ith special top option. Part number: STS-096-030-SA Special sizes are available Mobile w elded EKO frame table system w / storage Soldering 3 person w ork station EKO Tables fixed heights for ADA, seated, or standing. All w elded tube frames w ith leveling feet. Built in flush mount draw ers. Part number: EST-060-036-2US Special sizes are available Medical Mobile Testing Bed: All w elded assembly with power and data built in. under storage w ith heavy duty casters. Counter top options available. Part number: MTB-096-040-MS Special sizes are available EKO Table w / leveling feet 3 draw er Special test bench table custom built Test platform table All heavy duty w elded steel frame assemblies for testing purposes. Heavy loads and vibration control built in. Part number: TPT-072-036-CCT Special sizes are available Tube frame bases / tables Sealed out toe kick all w elded steel frame base. Clips to attach counter tops and leveling feet typical. Part number: TFB-048-048-TKS Special sizes are available Tooling and test table custom built EKO tube frame table 2 low er shelves w/ base closeout EKO Data and computer charging tables: Great for laptop charging and data rooms. Pow er and data runs both vertical and horizontal plus daisy chainable frames. Part number: DCC-072-042-VPC Special sizes are available Computer laptop charging stations or for data rooms Offset table - frames fixed heights for ADA, seated, or standing. All w elded tube frames w ith leveling feet. Pow der coat and counter top options. Part number: OTS-048-048-30-LT Special sizes are available Vision offset table frames for class rooms or libraries

CARTS Carts We offer a complete line of specialty carts from delivering gas to reagent products. We use materials such as powder coated carbon steel as well as stainless steel where needed. Our line is open to changes that may better suite your needs so use the information as a base to potentially find the best solution for your needs. Also if you do not see a specific cart for your intended needs do not hesitate to inquire if we can we will potentially design or possibly currently have a design for your needs. Because of space limitations not all systems are shown. For more details contact your dealer or sales group. MICROSCOPE CARTS MOBILE DELIVERY SYSTEMS MOBILE CART INDIVIDUAL WORK STATIONS AUDIO/VISUAL LAB GAS MOBILE TANK CART

CARTS Plant cart grow system Supplied w ith grow lights, plant tubs, w ire management and pow er timer included and adj. shelving. Pow der coated steel construction. Student biology lab applications. Part number: # PCG-058-082-MS Single sided or double sided microscope carts Mobile carts w ith lipped adjustable shelving for microscope storage in the classroom. This stable cart uses locking casters NSF non-marking type to transport scopes from room to room or from locked storage into the classroom. Pow der coated steel construction. Part number: # SMC-048-020-M1 Part number: # SMC-048-036-M2 (Double sided version) Bio Plant grow ing cart supplied with under shelf timed grow ing lights and bins Mobile Microscope carts single sided and double Utility cart All w elded steel flat top cart heavy duty loads. Pow der coated finish typical w ith NSF locking casters. Part number: # UMC-036-024-2TS This can be manufactured in various sizes and versions Optics mobile training table: Steel single station table double sided. Pow er outlets in frame standard 120v duplexes. Part number: # OMT-048-042-MSD This system is built w ith or w /o power Parts Cart w ith flat top all w elded rated for 750 lbs w / locking casters Optics cart Lab gas transport cart Standard construction: All heavy duty pow der coated finish with locking NSF style heavy duty casters. Safety straps included to safely transport small to large lab gas tanks. Casters are locking type nonmarking. Special sizes can be manufactured. Part number: # LGC-038-042-M6 (6 tank version shown) Lab gas transport cart No lift system: All heavy duty pow der coated finish with locking NSF style heavy duty casters. Safety straps included to safely transport small to large lab gas tanks. Casters are locking type non-marking. Special sizes can be manufactured. Part number: LGC-036-042-LM6 (6 tank version shown) Mobile Lab Gas canister cart all w elded steel w ith straps to hold tanks Mobile low profile tank cart (no lifting of tanks) Suture or pharma mobile dispensing carts: Steel pow der coated construction with adjustable shelving slotted. Standard casters NSF type locking. Part number: # SPC-65T-036-M Part number: # SPC-65T-048-M (This cart is manufactured in various sizes or specials.) Instrument Tables: 304 Stainless steel construction w ith locking casters. All w elded type cart with finished stainless steel brushed typical #4finish. Part number: # ITM-024-024-SS Sizes range from 24 up to 60 or specials Suture and pharmacy delivery cart adj. slots Instrument stainless steel carts

OVERHEAD CARRIERS Overhead Carriers We have developed custom and stock systems for customers that need power and plumbing delivered from the ceiling. These systems keep floor space open and allow for more flexibility within the lab space. Most systems are formed and welded steel assemblies that can handle piping for plumbing fixtures. Conduit clamping surfaces for electrical delivery along with handy box knockouts for specific types of outlets typically twist lock types to ensure proper connections. Separated data channels to keep the low voltage outlets separate from the high voltage systems. Also some HVAC delivery systems can be included for snorkel hoods. Metal systems depending on material will be powder coated per specifications. Special application utility carriers engineered for specific needs available Overhead Drop in Panels We have developed custom and stock systems for customers that need power and plumbing delivered from the ceiling. These systems keep floor space open and allow for more flexibility within the lab space. The panels are manufactured from 14 to 7 gauge materials from steel to stainless steel and aluminum. The panels use the drop ceiling grid for attachment using hardware. The panel allows for limited outlets and plumbing connections based on need. For value this is a great delivery system. Fixtures are typically of the quick disconnect type. Once installed the panels are fixed in position and do not move. Lynx drop in ceiling panel loaded Overhead Carriers We are currently offering three systems the Lynx, Vision, and custom built systems. The Lynx series has the drop in flat panels for ceiling grids, Drop boxes or posts, and horizontal wing style systems with spans up to 120. The Vision series is a radius style wing with spans up to 96 but can be bridged for longer runs. Special systems can be engineered for customers based on there requirements. We also have access to Plugmold / Wiremold along with other power delivery systems along with steel Unistrut products. Plumbing outlets from Water Saver Company, Chicago Faucet, as well as Speakman. Electrical fixtures from Leviton and Hubbel along with data from Panduit. Quick connection for mobile Discovery work stations using Lynx systems

Drop in panels for power, plumbing, and data outlets. Panels have added flanges and fasteners for drop ceiling attachment. Typical sizes are the 24 x24 panels but we can manufacture custom sizes if needed. Materials include powder coated steel, type 304 stainless steel brushed finish, and aluminum panels 3/16 thick. The standard steel panels are 14 to 11 gauge material. Model numbers: # LNX-DIP-024 = 24 x24 White powder coated steel # LNX-DIP-024-S = 24 x24 stainless steel # LNX-DIP-024-A = 24 x24 aluminum For added knockouts or custom added features consult our engineering department or your sales representative. Lynx ceiling drop in panels (for drop ceiling) Lynx ceiling utility carriers Lynx ceiling drop posts Lynx ceiling drop system- A ceiling mounted system used to carry power, data, and plumbing connections. Unistrut infused carrier can be attached to existing frames or built into a newly constructed lab spaces. These systems also are capable of housing flexible exhaust systems such as snorkel hoods. Other options include built in lighting either LED or standard fluorescent types. These systems use sheet metal and steel strut. They are all welded and finished for powder coating. If required we can also manufacture these in stainless steel. Model numbers: # LNX-CDS-036 = 36 X 24 deep standard up to 36 # LNX-CDS-048 = 48 X 24 deep standard up to 36 # LNX-CDS-060 = 60 X 24 deep standard up to 36 # LNX-CDS-072 = 72 X 24 deep standard up to 36 # LNX-CDS-096 = 96 X 24 deep standard up to 36 # LNX-CDS-120 = 120 X 24 deep standard up to 36 Drop posts All formed and welded ceiling drop down posts used to deliver power and data to locations where floor access needs to remain open. These drop posts are manufactured from carbon steel with a powder coated finish or stainless steel. Internal strut for conduit and plumbing connections. Removable access panels to again access to the inside for easy connections. These systems are also capable of carrying snorkel hoods. Model Numbers: # LNX-PST-008 = 8 x8 (Add knockouts as needed) # LNX-PST-010 = 10 x10 # LNX-PST-012 = 12 x12 # LNX-PST-018 = 18 x18 # LNX-PST-020 = 20 x20 # LNX-PST-024 = 24 x24 Special engineered sizes available when requested.

SHELVING SYSTEMS Shelving Systems Our shelving systems are manufactured from both carbon and stainless steel. Gauges of the materials used range from 18 to 11gauges for strength and long life. If the material is carbon steel the product will have a baked on powder coat finish unless specified. If the material is stainless steel there will be a number 4 brushed finish. We use both 304 and 316 stainless steel for specified applications. We have various shelf hanger and support brackets along with a completely welded and formed shelf assembly. Wall standards are heavy duty type with holes for #10 fasteners for wall attachment. All shelving systems meet the 100 plus pound load requirement. We also offer direct wall mount style shelf support brackets along with reinforced for added support for deep shelving or specials. Wall standards are slotted in a single row and double rows for side by side applications. The standards run from 12 up to 96 long. We can also offer special lengths when requested. Our wall standards are pierced with the same spread as our bench systems so the shelves / hanger brackets can be used throughout our product lines. One special option we also manufacture is our track system. The system allows for less wall penetrations as well as added horizontal support. The wall standard is slit at the top and clips into a horizontal rail attached to the wall. The standard can quickly be moved in ½ increments from left to right. The shelving system can also be removed quickly to open up the wall space if needed. This system is manufactured in both stainless steel and powder coated steel. Shelving systems are offered in our standard flat shelf with added divider features. We can also add seismic rails or formed lips on the shelves. Gravity feed and sloped versions are offered. Materials for shelves include wood, laminate, glass, phenolic resin, and epoxy resin.

WALL STANDARDS WALL STANDARD SINGLE SLOT WALL STANDARD DOUBLE SLOTTED WALL STANDARDS POWDER COATED STEEL SINGLE SLOT SIZE PRT NUMBER 12 = #100-012-WST-1R 18 = #100-018-WST-1R 24 = #100-024-WST-1R 30 = #100-030-WST-1R 36 = #100-036-WST-1R 42 = #100-042-WST-1R 48 = #100-048-WST-1R 60 = #100-060-WST-1R 72 = #100-072-WST-1R 84 = #100-084-WST-1R 96 = #100-096-WST-1R WALL STANDARDS STAINLESS STEEL 304 BRUSHED 12 = #100-012-WST-1RS 18 = #100-018-WST-1RS 24 = #100-024-WST-1RS 30 = #100-030-WST-1RS 36 = #100-036-WST-1RS 42 = #100-042-WST-1RS 48 = #100-048-WST-1RS 60 = #100-060-WST-1RS 72 = #100-072-WST-1RS 84 = #100-084-WST-1RS 96 = #100-096-WST-1RS WALL STANDARDS POWDER COATED STEEL DOUBLE SLOTTED SIZE PRT NUMBER 12 = #100-012-WST-2R 18 = #100-018-WST-2R 24 = #100-024-WST-2R 30 = #100-030-WST-2R 36 = #100-036-WST-2R 42 = #100-042-WST-2R 48 = #100-048-WST-2R 60 = #100-060-WST-2R 72 = #100-072-WST-2R 84 = #100-084-WST-2R 96 = #100-096-WST-2R WALL STANDARDS STAINLESS STEEL 304 BRUSHED 12 = #100-012-WST-2RS 18 = #100-018-WST-2RS 24 = #100-024-WST-2RS 30 = #100-030-WST-2RS 36 = #100-036-WST-2RS 42 = #100-042-WST-2RS 48 = #100-048-WST-2RS 60 = #100-060-WST-2RS 72 = #100-072-WST-2RS 84 = #100-084-WST-2RS 96 = #100-096-WST-2RS

SHELF BRACKETS HANGER BRACKETS BOOK ENDS STYLE POWDER COATED STEEL FORMED IN PAIRS SIZE PART NUMBER 6 100-HGR-006 8 100-HGR-008 10 100-HGR-010 12 100-HGR-012 16 100-HGR-016 18 100-HGR-018 20 100-HGR-020 24 100-HGR-024 HANGER BRACKET 304 STAINLESS STEEL 6 100-HGR-006-SS 8 100-HGR-008-SS 10 100-HGR-010-SS 12 100-HGR-012-SS 16 100-HGR-016-SS 18 100-HGR-018-SS 20 100-HGR-020-SS 24 100-HGR-024-SS SHELF UNDER MOUNT BRACKETS POWDER COATED STEEL FORMED IN PAIRS SIZE PART NUMBER 6 100-USB-006 8 100-USB-008 10 100-USB-010 12 100-USB-012 16 100-USB-016 18 100-USB-018 20 100-USB-020 24 100-USB-024 SHELF UNDER MOUNT BRACKET 304 STAINLESS STEEL 6 100-USB-006-SS 8 100-USB-008-SS 10 100-USB-010-SS 12 100-USB-012-SS 16 100-USB-016-SS 18 100-USB-018-SS 20 100-USB-020-SS 24 100-USB-024-SS

SHELF BRACKETS WALL MOUNT BRACKETS UNDERMOUNT STYLE POWDER COATED STEEL FORMED IN PAIRS SIZE PART NUMBER 6 100-WMB-006 8 100-WMB-008 10 100-WMB-010 12 100-WMB-012 16 100-WMB-016 18 100-WMB-018 20 100-WMB-020 24 100-WMB-024 WALL MOUNT BRACKET 304 STAINLESS STEEL 6 100-WMB-006-SS 8 100-WMB-008-SS 10 100-WMB-010-SS 12 100-WMB-012-SS 16 100-WMB-016-SS 18 100-WMB-018-SS 20 100-WMB-020-SS 24 100-WMB-024-SS WALL MOUNT SHELF BRACKET HANGER SUPPORT TYPE 2 HANGER BRACKETS TYPE 2 BOOK ENDS STYLE POWDER COATED STEEL FORMED IN PAIRS SIZE PART NUMBER 6 100-HGB-006 8 100-HGB-008 10 100-HGB-010 12 100-HGB-012 16 100-HGB-016 18 100-HGB-018 20 100-HGB-020 24 100-HGB-024 TYPE 2 HANGER BRACKET 304 STAINLESS STEEL 6 100-HGB-006-SS 8 100-HGB-008-SS 10 100-HGB-010-SS 12 100-HGB-012-SS 16 100-HGB-016-SS 18 100-HGB-018-SS 20 100-HGB-020-SS 24 100-HGB-024-SS

SHELF BRACKETS SPECIAL HEAVY DUTY WALL MOUNT STEEL OR STN STL SUPPORTS FOR HEAVY APPLICATIONS WHERE SUFFICIENT WALL SUPPORT IS AVAILABLE TO HANDLE HEAVIER LOADS. THE BRACKETS ARE MANUFATURED TO CUSTOMER SPECIFIED SIZES AND MATERIALS. HEAVY DUTY WALL MOUNT SUPPORTS GRAVITY FEED SLOTTED SHELVING ASY. GRAVITY FEED SHELF BRACKET BOTH STEEL AND TYPE 304 STAINLESS STEEL AVAILABLE. 10 #100-GFB-010 12 #100-GFB-012 16 #100-GFB-016 18 #100-GFB-018 20 #100-GFB-020 24 #100-GFB-024 GRAVITY FEED SHELF BRKT STAINLESS STEEL 10 #100-GFB-010-S 12 #100-GFB-012-S 16 #100-GFB-016-S 18 #100-GFB-018-S 20 #100-GFB-020-S 24 #100-GFB-024-S GRAVITY FEED SHELF BRACKET SHELF DIVIDER BRACKETS BOTH STEEL AND STAINLESS STEEL. 3 HIGH VERSION 6 & 10 ALSO OFFERED. 10 #100-SDB-010-3 12 #100-SDB-012-3 16 #100-SDB-016-3 18 #100-SDB-018-3 20 #100-SDB-020-3 24 #100-SDB-024-3 GRAVITY FEED SHELF BRKT STAINLESS STEEL 10 #100-SDB-010-3S 12 #100-SDB-012-3S 16 #100-SDB-016-3S 18 #100-SDB-018-3S 20 #100-SDB-020-3S 24 #100-SDB-024-3S DIVIDER FOR SLOTTED SHELVING

FLAT SHELVING FLAT SHELVING 1 H (FOR PHENOLIC RESIN ADD PR, FOR EPOXY RESIN ADD ER, WOOD ADD WD AND LAMINATE ADD LS)? IS WHERE YOU ADD YOUR WIDTH MAX LENGTH IS 96 6 X? 100-FSS-006 8 X? 100-FSS-008 10 X? 100-FSS-010 12 X? 100-FSS-012 16 X? 100-FSS-016 18 X? 100-FSS-018 20 X? 100-FSS-020 24 X? 100-FSS-024 FLAT STAINLESS STEEL SHELVING 1 H 6 X? 100-FSS-006-S 8 X? 100-FSS-008-S 10 X? 100-FSS-010-S 12 X? 100-FSS-012-S 16 X? 100-FSS-016-S 18 X? 100-FSS-018-S 20 X? 100-FSS-020-S 24 X? 100-FSS-024-S FLAT SHELF WITH FORMED BACK STOP FLAT SHELVING WITH BACK STOP 1 H WITH 1 H BACK STOP. WHERE? IS ADD SHELF WIDTH. MAX WIDTH WILL BE 96. 6 X? 100-FSB-006 8 X? 100-FSB-008 10 X? 100-FSB-010 12 X? 100-FSB-012 16 X? 100-FSB-016 18 X? 100-FSB-018 20 X? 100-FSB-020 24 X? 100-FSB-024 FLAT STAINLESS STEEL SHELVING 1 H 6 X? 100-FSB-006-S 8 X? 100-FSB-008-S 10 X? 100-FSB-010-S 12 X? 100-FSB-012-S 16 X? 100-FSB-016-S 18 X? 100-FSB-018-S 20 X? 100-FSB-020-S 24 X? 100-FSB-024-S FLAT STEEL SLOTTED SHELF SLOTTED SHELVING POWDER COATED STEEL. WHERE? IS ADD SHELF WIDTH. MAX WIDTH WILL BE 96. 8 X? 100-SSF-008 10 X? 100-SSF-010 12 X? 100-SSF-012 16 X? 100-SSF-016 18 X? 100-SSF-018 20 X? 100-SSF-020 24 X? 100-SSF-024 FLAT STAINLESS STEEL SHELVING 1 H 8 X? 100-SSF-008-S 10 X? 100-SSF-010-S 12 X? 100-SSF-012-S 16 X? 100-SSF-016-S 18 X? 100-SSF-018-S 20 X? 100-SSF-020-S 24 X? 100-SSF-024-S

SHELF SPECIALS GLASS SHELVING POWDER COATED STEEL HANGER BRKT. WHERE? IS ADD SHELF WIDTH. MAX WIDTH WILL BE 60.KIT INCLUDES HANGER BRACKETS ONLY FOR ROD KITS SEE BELOW. 8 X? 100-SGS-008 10 X? 100-SGS-010 12 X? 100-SGS-012 16 X? 100-SGS-016 18 X? 100-SGS-018 GLASS WITH STAINLESS STEEL SHELVING BRKT 8 X? 100-SGS-008-S 10 X? 100-SGS-010-S 12 X? 100-SGS-012-S 16 X? 100-SGS-016-S 18 X? 100-SGS-018-S GLASS SHELF WITH SEISMIC SHELF RODS SHELF MOUNTED WIRE ROD RETAINER MANUFACTURED IN STEEL. WIRE RODS ARE BENT TO A SPECIFED LENGTH WITH ADDED WELDED ON STUDS. TYPICAL THREAD PATTERNS ARE 10-32 OR 10-24 STUDS. SOME ¼-20 CAN BE USED WHEN REQUESTED. SHELVES ARE PRE-PIERCED TO ACCEPT THE SPECIFIED ROD WIDTHS. RODS ARE POWDER COATED TO SPECIFIED COLOR BASED ON CUSTOMERS REQUEST. MAXIMUM SIZE 59 W WITH WIRE ROD THICKNESSES RANGING FROM ¼ DIAMETER TO 3/8? ADD WITH OF REQUIRED SIZE SPECIFY ROD THICKNESS WHEN ORDER IS PLACED MODEL NUMBER 100-FWR-000-? SHELF MOUNTED WIRE SIESMIC RETAINERS STRAIT ROD SIESMIC RETAINERS SHELF MOUNTED STRAIT ROD KITS WITH HANGER BRACKETS CONSTRUCTED WITH COUPLINGS TO ACCEPT THE RODS. KITS ARE BUILT TO SPECIFIC LENGTHS BASED ON CUSTOMER REQUEST. KITS IF MADE FROM STEEL WILL BE POWDER COATED AS SPECIFIED. ADD THE WIDTH SIZE TO THE PART NUMBER FOR OVERALL SIZE. 8 X? 100-HRK-008 10 X? 100-HRK-010 12 X? 100-HRK-012 16 X? 100-HRK-016 18 X? 100-HRK-018 20 X? 100-HRK-020 24 X? 100-HRK-024 STAINLESS STEEL SHELVING BRKT ROD KIT 8 X? 100-HRK-008-S 10 X? 100-HRK-010-S 12 X? 100-HRK-012-S 16 X? 100-HRK-016-S 18 X? 100-HRK-018-S 20 X? 100-HRK-020-S 24 X? 100-HRK-024-S IF ALUMINUM IS REQUESTED FOR THE RODS ADD AL TO PART NUMBER. STRAIT ROD SHELF KITS WITH HANGER BRKTS.

SHELF SPECIALS STEEL FORMED SHELVING WITH LIPS FRONT & BACK STEEL FORMED SHELVING 1 H FRONT AND BACK LIP 6 X? 100-LFS-006 8 X? 100-LFS-008 10 X? 100-LFS-010 12 X? 100-LFS-012 16 X? 100-LFS-016 18 X? 100-LFS-018 20 X? 100-LFS-020 24 X? 100-LFS-024 FOR STAINLESS STEEL ADD S TO THE ABOVE PRT NUMBERS. FOR WIDTH ADD SIZE WHERE? IS MAX 96 STEEL FORMED SHELVING LIPS 2 H (TALLER SIZES BY REQUEST) 6 X? 100-FSL-006 8 X? 100-FSL-008 10 X? 100-FSL-010 12 X? 100-FSL-012 16 X? 100-FSL-016 18 X? 100-FSL-018 20 X? 100-FSL-020 24 X? 100-FSL-024 FOR STAINLESS STEEL ADD S TO THE ABOVE PRT NUMBERS. FOR WIDTH ADD SIZE WHERE? IS MAX 96 ADD ON FRONT AND BACK SHELF STOPS STEEL FORMED SHELVING WALL MOUNT LOW PROFILE STYLE FORMED IN PAIRS STEEL STYLE WITH POWDER COAT FINISH. 6 X? 100-LPB-006 8 X? 100-LPB-008 10 X? 100-LPB-010 12 X? 100-LPB-012 FOR STAINLESS STEEL ADD S TO THE ABOVE PRT NUMBERS. WALL MOUNT BRACKET LOW PROFILE STEEL TUBE FRAME WALL MOUNT SHELVING FOR BACK PACK AND COAT RACK WALL STORAGE. OR HEAVY LOADS. 12 X? 100-TSS-012 16 X? 100-TSS-016 18 X? 100-TSS-018 20 X? 100-TSS-020 24 X? 100-TSS-024 FOR STAINLESS STEEL ADD S TO THE ABOVE PRT NUMBERS. FOR WIDTH ADD SIZE WHERE? IS MAX 96 SHELF BACK PACK COAT RACK SYSTEM

SHELF SPECIALS RAIL SUPPORT STANDARD SYSTEM STEEL WALL STANDARDS NOTCHED FOR UPPER RAIL 36 100-RSS-036-1R (SINGLE SLOT) 48 100-RSS-048-1R 86 100-RSS-060-1R 86 100-RSS-086-1R 96 100-RSS-096-1R 36 100-RSS-036-2R (DOUBLE SLOTTED) 48 100-RSS-048-2R 86 100-RSS-060-2R 86 100-RSS-086-2R 96 100-RSS-096-2R STEEL FORMED UPPER HORIZONTAL RAIL ½ ADJUSTMENT SLOTS 24 100-FUR-024 36 100-FUR-036 42 100-FUR-042 48 100-FUR-048 60 100-FUR-060 72 100-FUR-072 96 100-FUR-096 120 100-FUR-120 UPPER HORIZONTAL WALL ATTACHMENT RAIL STEEL FORMED SHELVING BACK LIP 1 H ALL WELDED ASSEMBLY 10 X? 100-WSF-010 12 X? 100-WSF-012 16 X? 100-WSF-016 18 X? 100-WSF-018 20 X? 100-WSF-020 24 X? 100-WSF-024 FOR STAINLESS STEEL ADD S TO THE ABOVE PRT NUMBERS. FOR WIDTH ADD SIZE WHERE? WITH MAX 86 ALL FORMED WALL MOUNT FLAT STEEL SHELF STEEL FORMED SHELVING WALL MOUNT ALL WELDED ASSEMBLY 10 X? 100-WMG-010 12 X? 100-WMG-012 16 X? 100-WMG-016 18 X? 100-WMG-018 20 X? 100-WMG-020 24 X? 100-WMG-024 FOR STAINLESS STEEL ADD S TO THE ABOVE PRT NUMBERS. FOR WIDTH ADD SIZE WHERE? WITH MAX 86 WALL MOUNT GRAVITY FEED STEEL SHELF KIT

SHELF SPECIALS OPEN AND CLOSED OR SLOTTED CUBBY BINS STEEL FORMED CUBBIES FOR ENCLOSED STORAGE. FLIP OPEN FRONTS OR SLIDE OPEN FRONTS AVAILABLE. ALSO DIVIDER BINS BUILT IN AS NEEDED. SIZE MODEL NUMBER 13 D X 12 H X? 100-SCY-012 13 D X 16 H X? 100-SCY-016 13 D X 20 H X? 100-SCY-020 13 D X 24 H X? 100-SCY-024 18 D X 12 H X? 100-SCY-012-18 18 D X 18 H X? 100-SCY-018-18 18 D X 24 H X? 100-SCY-024-18 FOR STAINLESS STEEL ADD S TO THE ABOVE PRT NUMBERS. FOR WIDTH ADD SIZE WHERE? WITH MAX 72 STEEL FORMED BIN RAILS 14 GAUGE UP TO 11GA WITH POWDER COAT FINISH COLOR SPECIFIED BY CUSTOMER. 2 H X? 100-BRS-010 3 H X? 100-BRS-012 4 H X? 100-BRS-016 FOR STAINLESS STEEL ADD S TO THE ABOVE PRT NUMBERS. FOR WIDTH ADD SIZE WHERE? WITH MAX 86 BIN RAILS SLOTTED FOR WALL STANDARDS OR BENCH SLOTTED UPRIGHTS UNDER SHELF LIGHTING FLUORESCENT AND LED TYPES 24 100-USL-024-FL (T-5 TYPE) 100-USL-024-LED (LED LIGHTS) 36 100-USL-036-FL 100-USL-036-LED 48 100-USL-048-FL 100-USL-048-LED ALL LIGHTS HAVE 6 CORDS AND ARE DAISY CHAINABLE. ALL STANDARD US ELECTRICAL SOURCE 120V 60HZ POWER. TASK LIGHTING UNDER SHELF TYPE STEEL FORMED CANTILEVER SHELVING 11GA SHELF BRACKETS WITH OPEN INSIDE CORNER, HEAVY GAUGE. 10 X 10 100-CWM-010 12 X 12 100-CWM-012 16 X 16 100-CWM-016 18 X 18 100-CWM-018 20 X 20 100-CWM-020 24 X 24 100-CWM-024 FOR STAINLESS STEEL ADD S TO THE ABOVE PART NUMBERS. CANTILEVER SHELF BRCKET OPEN CORNER

SHELF SPECIALS AND PHARMA SHELVING SHELF / COUNTER TOP SUPPORT BRKT. ASSEMBLY UNDER SHELF OR COUNTER SUPPORT STEEL WELDED ASSEMBLY 12 100-SCT-012-PCS 20 100-SCT-020-PCS 24 100-SCT-024-PCS 29 100-SCT-029-PCS PHARMA FRAME SHELVING SYSTEMS- STEEL OR STAINLESS STEEL 1 X3 OR 1 X2 TUBE FRAMES SINGLE AND DOUBLE SIDED END UPRIGHTS SLOTTED. CROSS MEMBERS FOR STRENGTH UPPER MIDDLE AND BOTTOM FRAME PARTS. SHELVING OPTIONS LISTED IN CATALOG FOR FLAT OR GRAVITY FEED. HEIGHTS CAN BE SET AT REQUESTED CUSTOMER NEEDS. STANDARD SIZES SET AT 65, 78, AND 82 H. SPANS ARE SET AT 24, 36, 48, 60 AND 72. CUSTOM SIZES ARE AVAILABLE. ALL HARDWARE AND POWDER COAT FINISH INCLUDED. LEVELING FEET NSF NONMARKING 1 ADJUSTABLE ARE STANDARD. APPLICATIONS: STORAGE, NO WALL PENETRATIONS, & MATERIAL HANDLING PROJECTS. SINGLE SIDED PHARMA STYLE SHELVING ASY. SINGLE SIDED SLOTTED SHELVING RACK END PHARMA SINGLE SIDED SLOTTED END LEG 65 H PHR-065-024 1X3 FRAME TUBE 65 H PHR-265-024 1X2 FRAME TUBE 78 H PHR-078-024 1X3 FRAME TUBE 78 H PHR-278-024 1X2 FRAME TUBE 82 H PHR-082-024 1X3 FRAME TUBE 82 H PHR-282-024 1X2 FRAME TUBE PHARMA DOUBLE SIDED SLOTTED END LEG 65 H PHR-065-024-2R 1X3 FRAME TUBE 65 H PHR-265-024-2R 1X2 FRAME TUBE 78 H PHR-078-024-2R 1X3 FRAME TUBE 78 H PHR-278-024-2R 1X2 FRAME TUBE 82 H PHR-082-024-2R 1X3 FRAME TUBE 82 H PHR-282-024-2R 1X2 FRAME TUBE DOUBLE SIDED SLOTTED SHELVING RACK END FRAME STRETCHER MIDDLE AND BOTTOM UPPER HORIZONTAL SUPPORT BOTTOM AND MIDDLE FRAME SUPPORT POWDER COATED STEEL 24 W PBM-024-003 1X3 Frame tube for 2-002 30 W PBM-030-003 1X3 36 W PBM-036-003 1X3 48 W PBM-048-003 1X3 60 W PBM-060-003 1X3 72 W PBM-072-003 1X3 TOP FRAME SUPPORT POWDER COATED STEEL 24 W PTF-024-003 1X3 Frame tube for 2-002 30 W PTF-030-003 1X3 36 W PTF-036-003 1X3 48 W PTF-048-003 1X3 60 W PTF-060-003 1X3 72 W PTF-072-003 1X3

SHELF SPECIALS AND REAGENT SHELVING REAGENT FRAME SUPPORT POWDER COATED STEEL SQUARE TUBE ASSEMBLY. 10 W STS-018-010 SIZE 10 X18 H X 3 D ONE SHELF 10 W STS-018-010-2 SIZE 10 X18 H X 3 D TWO SHELVES 14 W STS-018-014 SIZE 14 X18 H X 3 D ONE SHELF 14 W STS-018-014-2 SIZE 14 X18 H X 3 D TWO SHELVES 18 W STS-018-018 SIZE 18 X18 H X 3 D ONE SHELF 18 W STS-018-018-2 SIZE 18 X18 H X 3 D TWO SHELVES REAGENT TABLE TOP ADD SHELF SUPPORT TWO TIER SHELF SUPPORT SHOWN REAGENT TABLE TOP ADD SHELF SUPPORT ROUND TUBE VERSION SINGLE SHELF REAGENT FRAME SUPPORT POWDER COATED STEEL ROUND TUBE ASSEMBLY. 10 W STR-018-010 SIZE 10 X18 H X 3 D ONE SHELF 10 W STR-018-010-2 SIZE 10 X18 H X 3 D TWO SHELVES 14 W STR-018-014 SIZE 14 X18 H X 3 D ONE SHELF 14 W STR-018-014-2 SIZE 14 X18 H X 3 D TWO SHELVES 18 W STR-018-018 SIZE 18 X18 H X 3 D ONE SHELF 18 W STR-018-018-2 SIZE 18 X18 H X 3 D TWO SHELVES REAGENT FRAME SUPPORT POWDER COATED FORMED WELDED ASY. 10 W RSS-018-010 SIZE 10 X18 H X 3 D ONE SHELF 10 W RSS-018-010-2 SIZE 10 X18 H X 3 D TWO SHELVES 14 W RSS-018-014 SIZE 14 X18 H X 3 D ONE SHELF 14 W RSS-018-014-2 SIZE 14 X18 H X 3 D TWO SHELVES 18 W RSS-018-018 SIZE 18 X18 H X 3 D ONE SHELF 18 W RSS-018-018-2 SIZE 18 X18 H X 3 D TWO SHELVES FORMED REAGENT SHELF SUPPORTS WITH OR WITHOUT POWER, DATA, AND PLUMBING OUTLET OPTIONS CUSTOM SIZES WHEN REQUESTED REAGENT SHELVING FLOOR MOUNT SYSTEM OR STAND ALONE (Pictured) This type of system is used in reagent applications as w ell as special use type projects. We can design various systems for y our specific needs from w et to dry labs as w ell as electronic or data applications. Most systems are steel w ith various surfaces for shelv ing and w ork surfaces. Added power chases or simple shelving just let us know how we can help you meet your needs. Contac t us for more details. Labcase retains the right to drop or change products in this catalog without notice. 2014 Rev C