VERTICAL BLDS AND CONSERVATORY AWNGS safe timeless beautiful markilux 745 / 845 The marquisolette in a cassette with guide tracks and innovative gas piston-tensioned sliding arm technology the ideal combination: half vertical blind, half drop-arm awning and variable stand-off fixture rated to wind resistance class 2 (corresponds to Beaufort 5) www.markilux.com markilux
markilux 745/ 845 VERTICAL BLDS AND CONSERVATORY AWNGS side view markilux 745 side view markilux 845 decorative cap for track bracket (optional) markilux 845 retracted markilux 745 markilux 845 reveal fixture square cassette, markilux 745 reveal fixture round cassette, markilux 845 Design Features Technical Specification Optional Accessories the markilux 745: compact, square and discreet, the cassette profile made of extruded aluminium is only 95 mm in height stand-off fixture from the façade. This embellishes the building still further for long-lasting attractiveness the blind has been powder coated when retracted the cover is protected from the weather by the cassette, which encloses it completely robust, self-supporting cassette made of extruded aluminium extremely sturdy, stainless steel side cheek, sheathed in plastic and powder coated operation by means of a smooth gearbox and universal joint to simplify fixture a broad selection of brackets is available an automatic locking device in the guide tracks prevents the arm mechanism from lifting in windy conditions hard-wired motor operation (optionally with automatic weather controls) for straightforward and easy operation radio-controlled motor with radio remote control for ease of use an easily installed, radio control light and wind sensor guarantees comfort and a degree of safety even in your absence also available as a coupled unit to span large widths 1 Special features www.markilux.com
markilux 745 / 845 VERTIC AL BLDS AND CONSERVATORY AWNGS Dimensions and configuration options 75 75 0 76 0 1 1 1 01 min. 0 1 0 2 1 2 300 251 300 02 03 433 04 1 160 0 74.5 2 05 73.5 06 280 300 dimensions in cm 2 Operation / Drive unit 08 Covers standard winding handle operation manual operation from the rear hard-wired motor radio-controlled motor (433 Hz) io radio-controlled motor fabric range no. optional standard optional 324 xx / 328 xx / 369 xx sunvas snc 3 xx / 311 xx 313 xx 3 xx 11 1) perfotex 332 xx sunsilk perla FR 374 xx transolair 338 xx vuscreen ALU 317 xx vuscreen FR 318 xx sunvas perla 370 xx 2) 3) 4) 4) 2) a maximum unit height of 2 cm 2) in the case of the markilux 745 up to a maximum unit height standard 2 fields optional 3) depending on the width and unit height with horizontal, 4) in the case of the markilux 745 only seamless and up to a maximum unit height of 2 cm; depending on the width iscellaneous and unit height with horizontal, bonded seam(s) standard light and wind sensor of 2 cm; with vertical, bonded seams bonded seam(s) 09 sunsilk snc 1) stitched seams; in the case of the markilux 745 only up to Coupled units 07 optional 12 13 14 16 17 18 19 21 hard-wired motor 433 radio-controlled motor (433 Hz) www.markilux.com 2 no. of brackets per track A fixture width / order width A min. minimum width unit height Dimensions and configuration options 141
markilux 745/ 845 VERTICAL BLDS AND CONSERVATORY AWNGS Frame colours standard optional Additional information The width of the blind cover is always less than that of the blind. Please ask us about the cover sizes of coupled units. traffic white RAL 9016 metallic aluminium RAL 9006 Standard manual operation with bayonet fitting and universal joint made of stainless steel is operated from outside the building (winding handle lengths 1, 1, 160, 180 or 2 cm). grey brown, similar to RAL 8019 non-standard powder-coated finish anual operation using a universal joint and from the rear: This operation type should be used in installations when the system can be approached from the rear (e.g. on balconies). Colours similar to those in the RAL chart. Colours may differ slightly from those depicted in both hue and finish. Dimensions and tolerances width housing tolerances + 5 / drop blind cover width 1 blind fixture width blind cover length unit height + 0 In the case of manual operation it takes approximately 24 turns per metre of overall unit height to extend the system. In the case of motor operation the blind will take approx. seconds per metre to extend. N.B! If the motor is used continuously it will stop automatically after 3 to 4 minutes to prevent overheating. In the case of a bank of blinds operating simultaneously, the same speed of rotation of the motors cannot be guaranteed because of the internal tolerances of the motors. Depending on the size of the blind, deflection may be in evidence in individual profiles and sections of profile which is completely unavoidable. This affects neither the functionality nor the durability of the awning. In the case of asymmetrical, coupled units, the larger field may be no more than twice as large as the smaller field. Coupled units are only available with motor (surcharge). The maximum width of coupled units is 2 2 cm. Fixtures, fittings and accessories fixture type track bracket 80 mm fixture type 21 track bracket 0 mm fixture type 22 track bracket 1 mm 78451. 78538. 78539.. insert RAL colour code no. 142 Frame colours / Dimensions and tolerances / Additional information www.markilux.com
VERTICAL BLDS AND CONSERVATORY AWNGS markilux 745 / 845 Fixtures, fittings and accessories 01 80 6, 24 fixture type, flat track bracket fixture type, double flat track bracket 2 single units fixture type double flat track bracket coupled unit 02 03 33 78548. track bracket 00 mm 78671. 00 mm coupled unit 78660. mm 2 single units 04 05 06 07 785. 78665. 78685. 08 78454. fixture type 80 mm coupled unit fixture type 78663. fixture type 21 0 mm coupled unit fixture type 21 78664. fixture type 22 1 mm coupled unit fixture type 22 09 11 12 13 78654. 80 mm 2 single units 78658. 0 mm 2 single units 78683. 1 mm 2 single units 14 787211 footprint dimensions of adjustable track bracket fixture type accessories for two angled brackets or 787. 76603. fixture type additional bracket bearing/motor side 80 mm (fixture between beams, walls etc.) please order additional accessories 787211! decorative cap for track bracket to be used with: 78081., 78086., 78094., 78247., 78451., 78538., 78543., 78454., 78663. 787. 76604. fixture type additional angled bracket gearbox side 80 80 mm (fixture between beams, walls etc.) please order additional accessories 787211! decorative cap for track bracket to be used with: 78082., 78087., 78095., 785., 787., 788., 78251., 78539., 785., 78545., 78665., 78664., 78685. 16 17 18 19 21 reducing bolt 6 / SW 13 30 mm length refer to the section Technical Information 753211. insert RAL colour code no. www.markilux.com Fixtures, fittings and accessories 143
markilux 745/ 845 VERTICAL BLDS AND CONSERVATORY AWNGS Fixture combinations / Fixture types All brackets incur a surcharge Fixture type 78548. Fixture type 78548. Fixture type 78451. 80 Fixture type 21 78538. 0 Fixture type 22 78539. Individual bracket combinations see "Fixtures, fittings and accessories". Please note the minimum quantity required for the width and unit height you intend to order! 1 144 Fixture combinations / Fixture types www.markilux.com
VERTICAL BLDS AND CONSERVATORY AWNGS markilux 745 / 845 Dimension overviews markilux 745 min. 170 max. 300 95 T 25 A 55 [25] 01 02 max. 19 2 95 7 1 03 04 603 max. 1 FH 05 06 07 ca.4 08 09 Face fixture AL600 min. 0 max. 0 min. 80 F min. 80 11 12 95 T 13 14 min. 170 max. 300 2 127 95 7 P:, 21, 22 12,5 P: 16 17 1 85 80 18 19 12,5 A 8 A P 21 22 HT 78548. 78451. 78538. 78539. mm 80 mm 0 mm 1 mm T 1 mm 185 mm 5 mm 245 mm 6 21 T AL unit height depth exterior interior arm length fixture bracket height overall blind width A F FH blind fixture width blind width between fixture points cover width façade width façade height [ ] dimensions in the case of motor operation P fixture type www.markilux.com Dimension overviews 145
markilux 745/ 845 VERTICAL BLDS AND CONSERVATORY AWNGS Dimension overviews markilux 745 Reveal fixture in the case of gearbox / motor operation (fixture type ) 8 1 95 25 A 55 AS 80 min. 170 max. 300 60 [] 8 80 max. 1 min. 0 max. 0 787. [] NB 787. Cable exit point in the case of motor-driven units 30 60 60 14 48 48 AS A unit height exterior interior operation side overall blind width blind fixture width blind width between fixture points NB HT [ ] 787. cover width reveal width bracket dimensions in the case of motor operation additional angled bracket bearing / motor side additional angled bracket gearbox side 146 Dimension overviews www.markilux.com
VERTICAL BLDS AND CONSERVATORY AWNGS markilux 745 / 845 Dimension overviews markilux 845 Face fixture T AL max. 19 603 ca.4 min. 170 max. 300 min. 170 max. 300 149 118 AL600 2 117 1 3 1 max. 1 unit height depth exterior interior arm length fixture bracket height overall blind width min. 0 max. 0 1 T 1 A F FH [ ] P T 25 A min. 80 P 21 22 HT 78548. 78451. 78538. 78539. mm 80 mm 0 mm 1 mm T 1 mm 185 mm 5 mm 245 mm 1 85 F P:, 21, 22 12,5 12,5 A 80 55 [25] blind fixture width blind width between fixture points cover width façade width façade height dimensions in the case of motor operation fixture type 8 A P: FH 1 min. 80 6 01 02 03 04 05 06 07 08 09 11 12 13 14 16 17 18 19 21 www.markilux.com Dimension overviews 147
markilux 745/ 845 VERTICAL BLDS AND CONSERVATORY AWNGS Dimension overviews markilux 845 Reveal fixture in the case of gearbox / motor operation (fixture type ) 128 1 13 25 A 55 8 8 80 80 max. 1 min. 170 max. 300 min. 0 max. 0 787. [] AS 60 [] NB 787. Cable exit point in the case of motor-driven units 30 60 60 13 23 3 AS A unit height exterior interior operation side overall blind width blind fixture width blind width between fixture points NB HT [ ] 787. cover width reveal width bracket dimensions in the case of motor operation additional angled bracket bearing / motor side additional angled bracket gearbox side 148 Dimension overviews www.markilux.com
VERTICAL BLDS AND CONSERVATORY AWNGS markilux 745 / 845 Dimension overviews markilux 845 Coupled unit 2 fields, 1 motor A(KA) BA1 + BA2 25 A(EA1) BA1 A(EA2) BA2 25 X 32 A C 78548. 78660. 78451. 78538. 78539 78454. 78663. 78664. 32 X - X 32 B D 32 1 X 01 02 03 04 05 06 07 08 09 11 12 13 14 16 17 18 19 21 A (EA1) A (EA2) A (KA) A EA A B C D BA1 blind fixture width, unit 1 order width, unit 1 BA2 blind fixture width, unit 2 order width, unit 2 BA1 + BA2 blind fixture width, coupled unit order width, coupled unit overall blind width blind fixture width single unit KA BA coupled unit order dimension cover width motor operation www.markilux.com Dimension overviews 149
markilux 745/ 845 VERTICAL BLDS AND CONSERVATORY AWNGS 1 www.markilux.com