for superior solutions... UNICON Fast connection technology for better solutions UNICON - universal connections

for superior solutions... UNICON Fast connection technology for better solutions UNICON - universal connections

Contact Paul Rieger: Tel. +49 (0) 77 42 / 92 15-21 Fax +49 (0) 77 42 / 92 15-93 Mobil +49 (0) 171 / 864 72 61 email: paul.rieger@h-bau.de Oliver Etzrodt Tel. +49 (0) 70 82 / 41 39 63 Fax +49 (0) 70 82 / 79 33 00 Mobil +49 (0) 171 / 864 72 60 email: oliver.etzrodt@h-bau.de H-Bau Technik GmbH Head Office: Am Güterbahnhof 20 79771 Klettgau Germany Tel. +49 (0) 77 42 / 92 15-20 Fax +49 (0) 77 42 / 92 15-90 email: export.klettgau@h-bau.de Production North-East: Brandenburger Allee 14641 Nauen-Wachow Germany Tel. +49 (0) 332 39 / 775-20 Fax +49 (0) 332 39 / 775-90 email: export.berlin@h-bau.de Rudolf Till Tel. +49 (0) 332 39 / 775-24 Fax +49 (0) 332 39 / 775-90 Mobil +49 (0) 172 / 993 70 50 email: rudi.till@t-online.de

Fast connection system for superior solutions... Content UNICON General 2 Overview of types 3 Consulting & Design 4 Powercon 5 Powercon-Multi 6 Powerclip 8 Application samples 9 Basecon 10 Enercon 11 Aquacon 12 Sanicon 13 1 UNICON - universal connections

General UNICON fast connection system The product The German UNICON fast connection system has been developed to facilitate the erection of buildings in record time by saving up to 20 % of total construction costs. The UNICON system, for which a wide international patent family is granted, will allow a simultaneous coupling not only of the building elements, but of all the systems integrated within them, such as heating and electrical installations. Features It is saving costs: the shorter assembly time and a higher productivity in precast represents a huge potential cost saving. the construction period is enormously reduced; service installations are prefabricated and incorporated more swiftly; and building firms are less dependent on subcontractors. It ensures a higher level of quality: all components and services are installed at works to a constant quality level and with comprehensive quality controls; and the risk of accidents on site is reduced. It is environmentally friendly: building sites are cleaner; waste products are avoided on site; and even the reuse of components is simplified by the scope provided for a damage-free dismantling and removal of elements. Application Using the UNICON connection technology, it will be possible to achieve a new quality benchmark in precast buildings by saving money at the same time. It is a simple technology even for subcontractors and suppliers of components which can work collaboratively to provide precast system modules. Ready for plug & play. 2

Overview of types for superior solutions... POWERCON and POWERCON - Multi Multitasking connectors can be used single or added in various building elements like walls, ceilings, roof-panels. Where a number of runs for different media have to be linked, the connection units can be installed in a row. For the simple use of only mechanical connections between walls, the so called POWERCON connectors made of solid steel will make mechanical jointing and can take loads up to several tons, depending on the reinforcement. The latest POWERCON Multi connector enables to take tolerances up to 20 mm in several directions. BASECON BASECON connectors made of fibreglass added polyamide are the base of the UNICON-System. They can be used for concrete wall constructions as shown as well as for ceiling or roof slabs. AQUACON und ENERCON connectors are based on the BASECON geometry and can be fixed with spax screws in wooden construction or with metric screws when used in concrete molds with M6 anchors. ENERCON For the ENERCON connector, plugs and sockets have been developed for electricity from 12 up to 400 Volts. The German VDE quality and security approval is granted. Telephones, computer and data lines, TV, and other special wiring can be easily installed with a system adapter. AQUACON AQUACON connectors are developed for liquid media such as drinking water and heating or cooling pipes. This water connector is gasketed and tested with a triple o-ring system. The German DVGW quality approval is pending. Any kind of piping system can be easily connected by a ½ inch inside thread. SANICON All bigger diameters for waste water or air condition are connected by the SANICON connector. There is a connector for 50 mm and for 90 mm piping systems. The German DVGW quality approval is pending. Assembling accessories for the easy and precise installation in the precast concrete units including screws and anchors are also delivered. 3 UNICON - universal connections

Consulting & Design UNICON Consulting With a team of experts, H-Bau supports all customers who are interested in testing UNICON in their projects by offering project consulting to reach best practise in using UNICON system components. We want UNICON customers to reach highest efficiency and quality in entire production and construction process. As requested H-Bau is offering product introduction as a workshop for their customers to produce first sample units in the customer`s production area. Furthermore H-Bau is offering project-consulting to precast factories and builders to reach higher efficiency and cost reduction by using UNICON technology in the entire planning-, production- and construction process. Prefab consulting includes optimisation of precast panels and construction details using UNICON. 4

Type Powercon for superior solutions... UNICON type Powercon fe POWERCON connectors made of zinced solid steel will make mechanical jointing and can take high loads, depending on the anchor system and the reinforcement. The element consists of a and fepart and builds a load-bearing connection. fe rubber layer UNIBLOC UNIBLOC UNIBLOC is fixed in the framework with hot-glue or with the UNIBLOC- Magnets in the right position. anchoring Heißkleber hot-glue wieder verwendbare reusable Spezialmagnete magnets M20 screw construction Drawing Anchor options UNIBLOC can be used to fix different anchor types in the mold. There are two possible anchortypes available: m20 screw connection systems and anchors UNIBLOC screw connection system anchor 5 UNICON - universal connections

Type Powercon-Multi UNICON type Powercon-Multi POWERCON-Multi connector: Male Fe POWERCON-Multi box: Male-Box Fe-Box Multitasking connectors can be used single or added in various building elements like walls, ceilings, roof-panels. Where a number of runs for different media have to be linked, the connection units can be installed in a row. For the simple use of only mechanical connections between walls, the so called POWERCON connectors made of solid steel will make mechanical jointing and can take loads up to several tons, depending on the reinforcement. The latest POWERCON Multi connector enables to take tolerances up to 20 mm in several directions. Adjustability POWERCON-Multi 10 mm 10 mm -connector 10 mm 10 mm 20 mm -box -box Adjustable part in horizontal position 10 mm in both ways. The joint width can be pre-adjusted by the fe-connector for 20 mm. The adjustability of the POWERCON-Multi can be pre-adjusted or be done after erecting of panels. Construction elements can be adjusted precisely in horizontal direction for 20 mm. 6

Type Powercon-Multi for superior solutions... Drawing Anchor options -Box fe fe-box Applications POWERCON-Multi can be combined with other fastening systems for the attachment of facades or claddings. Connection of 2 pre-cast concrete units with POWERCON-Multi. POWERCON-Multi used for connection of wood-constructions or for the connection of wood and concrete constructions. Fasteningstrips 7 UNICON - universal connections

Type Powerclip UNICON type Powerclip hook spanner anchor sleeve Click POWERCLIP connectors made of zinced solid steel will make invisible mechanical connection and can take load up to several tons, depending on the anchor system and the reinforcement. Once they are connected, the height can be adjusted with a hook spanner. One turn will lift the foot about 10 mm. So the POWERCLIP can also be used to screw two parts together and fix them invisible. The steelconnectors secure the wall construction against lifting forces depending on the anchoring and installation situation and take the loads from earth pressure in basement walls. Adjustability POWERCLIP fe slide bar Drawing anchor sleeve Installation tolerances unto 20 mm in all directions can be kept by fastening with a slide bar. Installation The two parts of POWERCLIP are placed in the floor slab and in the to be connected wall. Construction parts are connected with POWERCLIP by composing them together. Height can be adjusted with a hook spanner. 8

Application samples for superior solutions... Samples with precast concrete elements Samples with wooden pre-cast segments 9 UNICON - universal connections

Type Basecon UNICON type Basecon fe fe BASECON connectors made of fibreglass added polyamide are the base of the UNICON-System. They can be used for concrete wall constructions as shown as well as for ceiling or roof slabs. The AQUACON und ENERCON connectors are based on the BASEC- ON geometry and can be fixed with spax screws in wooden construction or with metric screws when used in concrete molds with M6 anchors. rubber layer UNIBLOC anchor sleeve UNIBLOC UNIBLOC is fixed in the framework with hot-glue or with the UNIBLOC- Magnets in the right position. Heißkleber hot-glue wieder verwendbare reusable Spezialmagnete magnets M6 screw construction Drawing Installation The UNIBLOC recess units can be installed in a row and define an intervall of 250 mm for BASECON. 10

Type Enercon for superior solutions... UNICON type Enercon clip For the ENERCON connector, plugs and sockets have been developed for electricity from 12 up to 400 Volts. The German VDE quality and security approval is granted. fe Telephones, computer and data lines, TV, and other special wiring can be easily installed with a system adapter. fe construction cable M6 screws Drawing Wieder verwendbare reusable Magnete magnets Heißkleber hot-glue M6 Ankerhülsen anchor sleeves M6 11 UNICON - universal connections

Type Aquacon UNICON type Aquacon fe clip AQUACON connectors are developed for liquid media such as drinking water and heating or cooling pipes. This water connector is gasketed and tested with a triple o-ring system. The German DVGW quality approval is pending. Any kind of piping system can be easily connected by a ½ inch inside thread. construction fe water pipe Drawing clip 12

Type Sanicon for superior solutions... UNICON type Sanicon fe All bigger diameters for waste water or air condition are connected by the SANICON connector. There is a connector for 50 mm and for 90 mm piping systems. The German DVGW quality approval is pending. Assembling accessories for the easy and precise installation in the precast concrete units including screws and anchors are also delivered. drain pipe MULTILOC The MULTIBLOC recess unit is fixed in the framework with hot-glue or with reusable magnets. fe screws Multibloc MULTIBLOC Aussparungskörper recess unit wieder verwendbare reusable Magnete magnets Heißkleber hot-glue construction DN 50 mm Drawing 4x M6 x 30 13 UNICON - universal connections

Concreting with system... ISOPRO ISOMAXX KE/SII RAPIDOBAT HED FERBOX BOXFER GRIPRIP PENTAFLEX PLURAFLEX RIPINOX WARMBORD SCHALBORD ZEMBORD SCHALL-ISO ACCESSORIES 80mm Balcony insulation elements 120mm Balcony insulation elements Transport anchors Shuttering tubes Shear dowels Reinforcement connectors Reinforcement connectors Masonry fixings Sealing technology Sealing technology Rustproof stainless steel Shuttering elements Shuttering elements Shuttering elements Sound insulation elements Spacers H-BAU Technik GmbH Am Güterbahnhof 20 79771 Klettgau-Erzingen Germany Tel. + 49 (0) 7742 92 15-20 Fax + 49 (0) 7742 92 15-90 info.klettgau@h-bau.de Production North East Brandenburger Allee 30 14641 Nauen-Wachow Germany Tel. + 49 (0) 3 3239 775-20 Fax + 49 (0) 3 3239 775-90 info.berlin@h-bau.de 12/2010