TECHNICAL DATA AND INFORMATION PRELIMINARY 85 kw/114 hp 17.8-1. t up to 1.4 m MHL2D RECYCLING MACHINE
TECHNICAL DATA MHL2 D OPERATING WEIGHT 17.8-1. t DIESEL ENGINE MANUFACTURER AND MODEL Deutz TCD 212 L4 2V DESIGN 4-cyinder inine ENGINE CONTROL EMR III TYPE 4-stroke diese, common rai direct injection, turbo-charger, charge air cooing ENGINE OUTPUT 85 kw/114 hp NOMINAL SPEED 2 min -1 DISPLACEMENT 48 cm COOLING SYSTEM EMISSION STANDARDS AIR FILTER DESIGN FUEL CAPACITY (USABLE) Liquid intercooing with temperature-controed fan speed COM III and EPA Tier III Two-stage fiter with safety vave iters ELECTRICAL SYSTEM OPERATING VOLTAGE BATTERIES LIGHTING SET OPTION 24 V 2 x 12V / 1Ah / 85A (in accordance with EN) 1 x H foodight on upper carriage, 1 x H foodight on cab foor, turn signa and rear sidemarker amps Generator system TRAVEL DRIVE TRAVEL SPEED 1st GEAR TRAVEL SPEED 2nd GEAR Hydrostatic drive through infinitey variabe axia piston motor and directy mounted trave brake vaves, two-speed shift gear, a-whee drive 5 km/h (.1 mph) 2 km/h (12.4 mph) GRADEABILITY max. 55% TURNING RADIUS RING GEAR DRIVE SWING SYSTEM 7. m UPPER CARRIAGE SWING SPEED - 8 min -1 PIVOT BRAKE Internay toothed ba ring gear (doube row) Two-stage panetary gear with integrated muti-disc brake Eectricay operated UNNDERCARRIAGE FRONT AXLE Panetary drive axe with integrated drum brake, rigidy mounted, max. steering ange REAR AXLE STABILIZER VERSIONS TIRES Osciating panetary drive rear axe with integrated drum brake and seectabe osciating axe ock 4-point stabiizers, 2-point stabiizers with stabiizing bade Pneumatic tires.-2 Soidea BRAKE SYSTEM SERVICE BRAKE PARKING BRAKE Hydrauic singe-circuit braking system acting on a four whee pairs (drum brakes) Eectricay operated spring-oaded disc brake at transmission, acting on both front and rear axe 2
HYDRAULIC SYSTEM MAX. PUMP CAPACITY MAX. OPERATING PRESSURE HYDRAULIC OIL TANK REXROTH mobie hydrauic system with optiona oad imit contro and fue-saving power demand contro. Separate oi cooer, temperature-controed fan speed. Hydrauic oi fiter: fiter eements integrated in the oi tank; maintenance interva operating hrs. Centra ubrication system. 2 iters/min 2/ bar iters OPERATOR S CAB HEATING OPERATOR S SEAT MONITORING AIR CONDITIONING Cab: easticay supported, infinitey variabe hydrauicay height-adjustabe with max. eye eve of 5.2 m. Sound-deadened, heat-insuated panoramic windows for optimum a-around view, windshied with pu-down sunbind that sides under cab roof, visibiity pane in cab roof, siding window in cab door, steering coumn height and tit adjustabe. Infinitey variabe hot water heating with -speed fan, 4 adjustabe defroster nozzes Mechanicay cushioned comfort-seat with integrated headrest, safety bet and umbar support, seat heating with integrated a/c function optiona. Seat position, seat incination and seat cushion muti-adjustabe in reation to position of armrests and piot contro units, aowing fatigue-free operation. Ergonomic instrument ayout, gare free. Function monitoring; automatic warning and storage of deviating operating conditions, e.g. fiter pressure w. warning indicator and shutdown of piot contros, warning indicator or shutdown of piot contros if hydrauic oi temperature imits are exceeded. Automatic SAFETY INSTALLATIONS For crane operations in accordance with EN 474-5. Cab protection by cose proximity range imiter. OFFICIAL HOMOLOGATION Certification in accordance with CE reguations.
EQUIPMENT MHL2 D ENGINE SERIES OPTION Exhaust gas turbocharger Intercooing Direct eectronic fue injection/ Common Rai Automatic ide Engine pre-heating Interface for engine diagnosis Temperature-controed fan drive UNDERCARRIAGE SERIES OPTION 2-speed shift transmission 2-speed power-shift transmission 4-point stabiizers 2-point stabiizers and stabiizer bade 4-point stabiizers, individuay controabe Stabiizer cyinders with integrated two-way check vaves A-whee drive Piston rod protection on stabiizer cyinders Rear axe osciating ock Dozer bade in addition to 4-point stabiizers Specia paint Drum brakes Soid rubber tires. - 2 with spacer rings Too box on undercarriage UPPER CARRIAGE SERIES OPTION Eectric refueing pump Lighting protection Maintenance hood, actuated by gas strut, with mechanica ocking device Lockabe ceaning access openings on radiator Separate radiator system for ambient temperatures up to 5 C Separate oi cooer w. temperaturecontroed fan drive Automatic centra ubrication system Reversing aarm Specia paint Quick-drain vave for fue tank (suppied in too box) Quick-drain vave on hydrauic oi tank Quick-drain vave on radiator Quick-drain vave on engine oi-pan Reversibe fan for radiator and hydr. oi cooer Too box (sma) in upper carriage CAB SERIES OPTION Lift-up skyight in cab roof Operator s seat mechanicay cushioned Air cushioned operator s seat with headrest, safety bet and umbar support FOPS protective grating Front/roof protective grating Hinged front windshied Front windows break-resistant (LEXAN) Buet-proof safety gass, front and top Cab eevation system Air conditioning Steering coumn, height and tit adjustabe Muti-function dispay Fire extinguisher, dry powder Pre-equipped for radio Radio cassette Radio / CD payer Rotating beacon Siding window in cab door Safety gass Seat heating with integrated a/c function Engine-independent heating Windscreen washer system Dust protection system Pressurized cabin system EQUIPMENT SERIES OPTION Foodights attached to cab foor Foodights, mounted to upper carriage Foodight, stick mounted Load imit contro Hydrauic oi preheating Cose proximity range imiter for stick Cooant and hydr. oi eve monitoring system Hose rupture protection for ift cyinder Hose rupture protection for stick cyinder Stick shock protection Lubrication of the grab suspension by centra ubrication system Overoad warning / shutdown XENON foodight on stick XENON foodight on superstructure XENON foodight on cab roof Quick-connect couping on stick 4 Ba-vave couping Fiter system for attachments
DIMENSIONS MHL2 D 2-point stabiizers with support bade 85 25 28 8 125 225 254 14 175 5 with protective grating for cab roof 52 25 585 5 45 MHL2 D 4-point stabiizers 25 475 28 8 12 225 254 85 275 14 25 5 45 175 5 with protective grating for cab roof MHL2 D Transport dimensions with stick E D A B C MHL2 D Transport dimensions with muti-purpose stick E D A B C DIMENSIONS REACH 8.5 m REACH.5 m REACH 1.4 m REACH 8.2 m (MULTI-PURPOSE STICK) A 7.2 mm 8.5 mm 8. mm 7. mm 8.41 mm B.5 mm 4.8 mm. mm.85 mm 4.5 mm C 1.15 mm 1.15 mm 1.15 mm 1.15 mm 1.15 mm REACH.2 m (MULTI-PURPOSE STICK) D.175 mm / *.5 mm.175 mm /.5 mm*.175 mm /.5 mm*.175 mm /.5 mm*.175 mm /.5 mm* E.8 mm.24 mm 4.24 mm.5 mm 2.75 mm * with protective grating for cab roof 5
WORKING RANGES/LIFTING CAPACITIES MHL2 D 11 1 8 7 5 4 2 1-1 -2 - -4-5 11 1 8 7 5 4 2 1 Reach in m Center of rotation Reach 8.5 m with stick Work equipment: Box-type boom 4.2 m; Stick 4. m; Cactus grab RECOMMENDED ATTACHMENTS LIFT HOOKS TEREX FUCHS CACTUS GRAB.4 m TEREX FUCHS CACTUS GRAB. m GRAB FOR LIGHTWEIGHT MATERIALS.8 m MAGNET SYSTEM 1 t Open or haf-cosed shes Open or haf-cosed shes Depending on density of goods Terex Fuchs magnetic pate HEIGHT m 7.5 4.5 1.5-1.5 UNDERCARRIAGE REACHES m STABILIZERS 4.5 7.5 non supported (.2*) (4.1) 4-pt. supported.2* (.2*) 4.5* (4.5*) 2-pt. supported with bade.2* (.2*) 4.5* (4.5*) non supported (4.1) 4-pt. supported 5.4* (5.4*) 2-pt. supported with bade 5.4* (5.4*) non supported (.2*) (4.1) (2.) 4-pt. supported.2* (.2*) 5.5* (5.5*) 4. (4.8*) 2-pt. supported with bade.2* (.2*) 5.4 (5.5*).7 (4.8*) non supported (.2) (4.) (2.) 4-pt. supported 7.2* (7.2*) 5.8* (5.8*) 4.5 (4.8*) 2-pt. supported with bade 7.2* (7.2*) 5.2 (5.8*).7 (4.8*) non supported (11.) (5.) (.) (2.8) 4-pt. supported 1.5* (1.5*) 8.4* (8.4*).2* (.2*) 4.5 (4.7*) 2-pt. supported with bade 1.5* (1.5*) 7.8 (8.4*) 5. (.2*). (4.7*) non supported (5.) (5.) (.8) (2.8) 4-pt. supported 8.5* (8.5*) 8.7* (8.7*).1* (.1*) 4.4* (4.4*) 2-pt. supported with bade 8.5* (8.5*) 7.5 (8.7*) 4. (.1*). (4.4*) non supported (8.*) (5.5) (.7) (2.8) 4-pt. supported 8.* (8.*) 7.* (7.*) 5.2* (5.2*).2* (.2*) 2-pt. supported with bade 8.* (8.*) 7.4 (7.*) 4. (5.2*).2* (.2*) Capacity vaues are stated in metric tons (t). The pump pressure is bar (5221 psi). The vaues, in accordance with ISO 157, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Non-supported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations.
WORKING RANGES/LIFTING CAPACITIES MHL2 D 11 1 8 7 5 4 2 1-1 -2 - -4-5 11 1 8 7 5 4 2 1 Reach in m Center of rotation Reach.5 m with stick Work equipment: Box-type boom 5.2 m; Stick 4. m; Cactus grab RECOMMENDED ATTACHMENTS LIFT HOOKS TEREX FUCHS CACTUS GRAB.4 m GRAB FOR LIGHTWEIGHT MATERIALS. m MAGNET SYSTEM 1 t Open or haf-cosed shes Depending on density of goods Terex Fuchs magnetic pate HEIGHT m 7.5 4.5 1.5-1.5 UNDERCARRIAGE REACHES m STABILIZERS 4.5 7.5 non supported (.5*) 4-pt. supported.5* (.5*) 2-pt. supported with bade.4* (.4*) non supported (4.) 4-pt. supported 5.2* (5.2*) 2-pt. supported with bade 5.1* (5.1*) non supported (4.) (.) 4-pt. supported 5.2* (5.2*) 4.5* (4.5*) 2-pt. supported with bade 5.1* (5.1*).7 (4.5*) non supported (.) (4.2) (.) (2.2) 4-pt. supported.8* (.8*) 5.5* (5.5*) 4.* (4.*).5 (.8*) 2-pt. supported with bade.7* (.7*) 5.2 (5.4*).7 (4.5*) 2.8 (.7*) non supported (.1) (4.) (2.) (2.2) 4-pt. supported 7.7* (7.7*) 5.8* (5.8*) 4.* (4.*).5 (.7*) 2-pt. supported with bade 7.7* (7.7*) 5. (5.8*). (4.*) 2.8 (.7*) non supported (5.7) (.8) (2.8) (2.1) 4-pt. supported 8.4* (8.4*).* (.*) 4.5 (4.*).4 (.5*) 2-pt. supported with bade 7.4 (8.5*) 4. (.*).5 (4.*) 2.7 (.5*) non supported (5.4) (.) (2.7) (2.1) 4-pt. supported 8.1* (8.1*) 5.8* (5.8*) 4.* (4.*).* (.*) 2-pt. supported with bade 7.2 (8.2*) 4.7 (5.8*).5 (4.*) 2.7 (.1*) non supported (5.) (.5) (2.7) 4-pt. supported.7* (.7*) 4.* (4.*).* (.*) 2-pt. supported with bade.* (.*) 4.7 (5.*).4 (.*) Capacity vaues are stated in metric tons (t). The pump pressure is bar (5221 psi). The vaues, in accordance with ISO 157, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Non-supported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations. 7
WORKING RANGES/LIFTING CAPACITIES MHL2 D 12 11 1 Reach 1.4 m with stick Work equipment: Box-type boom 5.2 m; Stick 5. m; Cactus grab 8 7 5 4 2 1-1 -2 - -4-5 - 12 11 1 8 7 5 4 2 1 Center of rotation Reach in m 8
HEIGHT m 7.5 4.5 1.5-1.5 - UNDERCARRIAGE REACHES m STABILIZERS 4.5 7.5 non supported (4.1) 4-pt. supported 4.7* (4.7*) 2-pt. supported with bade 4.7* (4.7*) non supported (4.1) (2.) 4-pt. supported 4.5* (4.5*) 4.1* (4.1*) 2-pt. supported with bade 4.5* (4.5*).7 (4.1*) non supported (4.1) (2.) (2.1) 4-pt. supported 4.5* (4.5*) 4.1* (4.1*).4 (.*) 2-pt. supported with bade 4.5* (4.5*).7 (4.1*) 2.7 (.*) non supported (4.) (2.8) (2.1) 4-pt. supported 4.8* (4.8*) 4.2* (4.2*). (.7*) 2-pt. supported with bade 4.8* (4.8*). (4.2*) 2.7 (.7*) non supported (.) (.8) (2.7) (2.) 4-pt. supported.7* (.7*) 5.* (5.*) 4.4* (4.4*). (.7*) 2-pt. supported with bade.7* (.7*) 5. (5.*).5 (4.4*) 2.7 (.7*) non supported (5.) (.) (2.) (2.) 4-pt. supported 8.* (8.*) 5.8* (5.8*) 4. (4.*).2 (.7*) 2-pt. supported with bade 7.5 (8.*) 4.8* (5.8*).4 (4.*) 2. (.7*) non supported (5.2) (.5) (2.5) (1.) 4-pt. supported 8.5* (8.5*) 5.8 (.*) 4.2 (4.5*).2 (.5*) 2-pt. supported with bade 7.1 (8.5*) 4. (.*). (4.5*) 2. (.5*) non supported (5.) (.) (2.4) (1.) 4-pt. supported 7.8* (7.8*) 5.* (5.*) 4.1* (4.1*).* (.*) 2-pt. supported with bade. (7.8*) 4.5 (5.*). (4.1*) 2.5 (.*) non supported (5.) (.) (2.4) 4-pt. supported.2* (.2*) 4.5* (4.5*).2* (.2*) 2-pt. supported with bade.2* (.2*) 4.4 (4.5*).2* (.2*) Capacity vaues are stated in metric tons (t). The pump pressure is bar (5221 psi). The vaues, in accordance with ISO 157, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Non-supported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations. RECOMMENDED ATTACHMENTS LIFT HOOKS 1 t TEREX FUCHS CACTUS GRAB.4 m GRAB FOR LIGHTWEIGHT MATERIALS.5 m MAGNET SYSTEM Open shes Depending on density of goods Terex Fuchs magnetic pate
WORKING RANGES/LIFTING CAPACITIES MHL2 D 11 1 8 7 5 4 2 1-1 -2 - -4-5 11 1 8 7 5 4 2 1 Reach in m Center of rotation Reach 8.2 m with muti-purpose stick Work equipment: Box-type boom 4.2 m; Muti-purpose stick.7 m; Sorting grab HEIGHT m 7.5 4.5 1.5-1.5 UNDERCARRIAGE REACHES m STABILIZERS 4.5 7.5 non supported (.*) 4-pt. supported.* (.*) 2-pt. supported with bade.* (.*) non supported (5.*) 4-pt. supported.* (.*) 2-pt. supported with bade.* (.*) non supported (5.*) (.7) 4-pt. supported 5.* (5.*) 5.* (5.*) 2-pt. supported with bade 5.* (5.*) 4.8 (5.*) non supported (5.) (.) (2.5) 4-pt. supported.* (.*) 5.4* (5.4*) 4.1 (4.5*) 2-pt. supported with bade.* (.*) 4.8 (5.4*). (4.5*) non supported (8.*) (5.) (.5) (2.4) 4-pt. supported 8.* (8.*) 7.* (7.*) 5.7* (5.7*) 4.1 (4.5*) 2-pt. supported with bade 7.4* (7.4*) 7.4* (7.4*) 4.7 (5.5*). (4.*) non supported (1.4) (5.) (.4) (2.4) 4-pt. supported 1.8* (1.8*) 8.* (8.*) 5.8 (5.*) 4. (4.4*) 2-pt. supported with bade 1.8* (1.8*) 7. (8.*) 4.5 (5.*).2 (4.4*) non supported (7.4*) (5.1) (.) (2.4) 4-pt. supported 7.4* (7.4*) 8.* (8.*) 5.7 (5.7*).8* (.8*) 2-pt. supported with bade 7.4* (7.4*) 7. (8.*) 4.4 (5.7*).1 (.8*) non supported (7.8*) (5.) (.2) 4-pt. supported 7.8* (7.8*).* (.*) 4.* (4.*) 2-pt. supported with bade 7.8* (7.8*).* (.*) 4.4 (4.*) Capacity vaues are stated in metric tons (t). The pump pressure is bar (5221 psi). The vaues, in accordance with ISO 157, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Non-supported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations. 1
WORKING RANGES/LIFTING CAPACITIES MHL2 D 12 11 1 8 7 5 4 2 1-1 -2 - -4-5 11 1 8 7 5 4 2 1 Reach in m Center of rotation Reach.2 m with muti-purpose stick Work equipment: Box-type boom 5.2 m; Muti-purpose stick.7 m; Sorting grab HEIGHT m 7.5 4.5 1.5-1.5 UNDERCARRIAGE REACHES m STABILIZERS 4.5 7.5 non supported (5.8) 4-pt. supported.2* (.2*) 2-pt. supported with bade.2* (.2*) non supported (5.*) (.) 4-pt. supported 5.* (5.*) 5.* (5.*) 2-pt. supported with bade 5.* (5.*) 4.8 (5.*) non supported (5.) (.) (2.4) 4-pt. supported.* (.*) 5.* (5.*) 4.1 (4.2*) 2-pt. supported with bade.* (.*) 4.7 (5.*).2 (4.2*) non supported (5.7) (.5) (2.) 4-pt. supported.* (.*) 5.2* (5.2*) 4.1 (4.2*) 2-pt. supported with bade.* (.*) 4.7 (5.2*).2 (4.2*) non supported (5.) (.) (2.) (1.7) 4-pt. supported 7.* (7.*) 5.5* (5.5*) 4. (4.*) 2. (.*) 2-pt. supported with bade 7. (7.*) 4.5 (5.5*) 2. (4.*) 2. (.*) non supported (4.) (.2) (2.2) (1.) 4-pt. supported 8.2* (8.2*) 5.5* (5.7*). (4.2*) 2. (.*) 2-pt. supported with bade.8 (8.2*) 4. (5.7*). (4.2*) 2. (.*) non supported (4.7) (.) (2.2) 4-pt. supported 7.* (7.*) 5.4* (5.4*).8 (.*) 2-pt. supported with bade. (7.*) 4.2 (5.4*). (.*) non supported (4.) (.) (2.1) 4-pt. supported.* (.*) 4.4* (4.4*).* (.*) 2-pt. supported with bade.* (.*) 4.1 (4.4*) 2. (.*) Capacity vaues are stated in metric tons (t). The pump pressure is bar (5221 psi). The vaues, in accordance with ISO 157, amount to 75% of the static tipping oad or 87% of the hydrauic ifting force (marked *). They appy to sewing operations through on a firm and eve surface. Vaues in brackets appy to the ongitudina direction of the undercarriage. Non-supported vaues ony appy when the oad is hoisted above the front or rear axe. The weight of the attached hoisting equipment (grab, magnet, oad hook etc.) must be deducted from the capacity vaues. In accordance with CE guideines, hose-rupture safety vaves on the ift cyinders and an overoad warning device are required for crane operations. 11
Terex Fuchs GmbH D-7 Bad Schönborn Germany Te.: +4 () 72 5/ 84- Fax: +4 () 72 5/ 8 41 11 Web: www.terex-fuchs.de Emai: info@terex-fuchs.de PURPOSE BUILT Compact, manoeuvrabe, powerfu - this is the mobie oading machine MHL2 D. With its reach of 1.4 metres and operating weight of 1 tonnes, this machine is the idea soution for anyone who is ooking for an entry-eve machine but is not prepared to compromise on performance, efficiency or reiabiity. With its seemingy inexhaustibe reserves of power, the 85-kW/114-hp turbo diese engine gets even weighty oads moving with speed and precision. Thanks to the sensitive hydrauics and the dependabe mechanics, manoeuvring is smooth, straightforward and free of pay even under oad. The separate oi cooer with its arge cooing surface heps to keep the operating temperature in the green range even when the machine is in constant use. The cab is designed for exceent visibiity it can be eevated to an eye-eve of 5.2 metres and is fitted with arge panoramic windows. In addition, the MHL2 D offers specia features such as air-conditioning fitted as standard, an optiona reversibe fan and even a pressurized cabin system for use in environments that coud pose a risk to heath. SIMPLY OUTSTANDING. VERSATILE IN USE. MHL2 D. Outstanding visibiity. Outstanding performance. Outstanding in use MHL2 D vaid from machine no. 5. 5.28-GB (1.5). Printed in Germany. For further information pease contact your deaer or the Terex Fuchs saes department. Terex Fuchs reserves the right to continuay improve its products. Product specifications are subject to change without notice or obigation. The photographs and drawings in this brochure are for iustrative purposes ony. Refer to the appropriate Operator s Manua for instructions on the proper use of this equipment. Faiure to foow the appropriate Operator s Manua when using our equipment, or to otherwise act irresponsiby may resut in serious injury or death. Prices and specifications subject to change without notice. The ony warranty appicabe is the standard written warranty appicabe to the particuar product and sae. Terex Fuchs provides no undertakings beyond the expressy agreed warranty conditions. Terex Corporation 28 Terex is a registered trade mark of the Terex Corporation in the United States of America and many other countries.