GL-1601C (EN) GLOBE VALVE - PDF Free Download

GL1C (EN) GLOBE VALVE

ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves in carbon steel, stainless steel, duplex stainless and alloy materials. Our products conform to the latest industry standards in accordance to ANSI, ASME and API. FBV today has over 00,000 square feet of manufacturing facilities. Through its conviction to provide only the finest quality products and services to match the need of our customers, FBV has now established itself as a serious player in the valve business. FBV INC has sold worldwide in North America, Europe, South America, South Asia, Africa and the Middle East. We consider product quality and customer satisfaction as our highest priority. We look forward to new customer relationships by providing value, quality, customer service, honesty, integrity and the commitment to maintain product consistency with each and every order. MISSIONSTATEMENT We at FBV, Inc. commit to taking ACTION: Adopt the latest technology to take the product quality to the next level; Consistently provide ontime services to our customers; Train and develop talented people with strong work ethics to deliver effective performance; Improve and enhance engineering designs to ensure product performance; Optimize management systems and increase productivity; Never forget our customer and employee needs.

TABLE OF INEX PAGE Introduction, Features Scope of Products Overview Globe Valve (Bolted Bonnet) imensions and Weights Class 10 (PN 0) Class (PN 0) 7 Class 00(PN 0) Class 900(PN 10) 9 Class 1(PN ) Overview Globe Valve (Pressure Seal Bonnet) 11 imensions and Weights Class 900 (PN 10) Class 1 (PN 10) 1 Class (PN ) Valve Figure Number, ow To Order 11 1

This page is intentionally left blank.

INTROUCTION FEATURES esign of Body Bonnet Connection Bolted bonnet is normally applied on CL10~CL900, body seal is defaulted by gasket and RTJ ring; Pressure seal bonnet is applied on CL1~CL with pressure seal ring for body seal. esign of Packing By default graphite packing is used, PTFE packing can be used on corrosive media. API fugitive emission packing will be used upon request. esign of Backseat Renewable back seat is applied on all carbon steel and low alloy steel valve, however, body back seat is only applied for stainless steel valve. INTROUCTION FBV cast globe valve offers T type body by default with rising stem and hand wheel. It blocks the flow of pipeline through the rotation and lifting of hand wheel as well as stem to drive the lift of disc. The globe valve has the feature of long service lift since there is no relative friction between disc and body sealing surface. esign of Actuation and wheel and gear box are normally designed for cast globe valve based on different size and pressure rating; Electric, pneumatic or Chain wheel operation can be provided upon request. Bolted bonnet, pressure bonnet, bellow seal bonnet, high/low temperature extended bonnet and ISO 1 fugitive emission designed valves are available upon different request of services. esign of isc Single disc is normally adopted on cast globe valve, the medium flows from the bottom to the top; double disc is just applied while larger pressure difference or bigger size of valve, the medium flows from top to the bottom. Plug type disc can be provided upon request. esign of Seat FBV cast globe valve is defaulted by nonrenewable body seat, renewable seat is provided upon request only.

SCOPE OF PROUCTS Globe Valve Legends: A Available in Bolt Bonnet B Available in Pressure Seal Bonnet C Not Usually Required in/mm 0 1/ 0 0 10 00 0 1 1 0 0 00 Class 10 PN 0 Class PN 0 Class 00 PN 0 Class 900 PN 10 Class 1 PN Class PN 0 A A A A, B A, B A, B A A A A, B A, B A, B A A A A, B A, B A, B A, A, A, A, B A, B A, B A A A A, B A, B A, B A A A A, B A, B A, B A A A A, B A, B A, B A A A A, B A, B A, B A A A A, B A, B A A A A, B A, B A A A A, B A A A A, B A A A A 1.The sizes listed above are normal diameters. Contact our sales representative if any other dimensions are requested.

OVERVIEW (Bolted Bonnet) 17 1 1 1 1 19 11 0 9 7 1 1 Part List Single disc Type ouble disc Type 1 Body isc Stem Sleeve Stud Nut 7 9 11 Gasket Bonnet Backseat Packing Gland Gland Flange 1 1 1 17 1 Eye Bolt Nut Pin Stem Nut andwheel Nut Nut 19 0 1 Washer andwheel Rivet Nameplate Gear Octagonal Ring Standards esign & Manufacture BS 17, API, ASME B1. Facetoface ASME B1. End imension Test & Inspection API 9 ASME B1. (RF, RTJ), ASMEB1.7(RF,RTJ) ASME B1. (BW) Typical Materials Body, Bonnet,isc (Casting): A1 WCB, A1 CF, CF, CFM, CFM, A99 A, A, A LCB, LCC, LC (Forging): A, A0 LF, LF, LF, A1 F0, F0L, F1, F1L, F1, F, F,F11,F,F91, Monel, Inconel, astelloy Stem A1 Fa, F0, F0L, F1, F1L, F1, F,F Monel, Inconel, astelloy

IMENSIONS AN WEIGTS (Bolted Bonnet) ASME CLASS 10 (PN 0) ASME CLASS 10 (PN 0) in/mm RF RTJ BW L 0 1 0. 1 0. 7.7 00 ½.. 9. 1. 9. 1 9 1 9 9. 9. 1. 9. 0 7 1 1 11. 11. 19 11.1 0 0 9 0 9. 0.7 1.7 9 1 1. 1. 1.7 10 10 0 19 0 7 19. 0 19.. 17.7 00 0 9 0 9 77...7 19.9 7. 7. 9.17. 0 9 711 9 99 00 1 1. 1 0.1 0 7 77 00 77 0 1 1.. 1. 7 9 97 9 0 1 17.. 9. 0. 97 991 97 0 19.. 9..7 9 97 991 97 0.7 1 1. 1.11 00 91 9 10 9 170 The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative.. W on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation. W Weight RF/BW (lb/kg) 7/ 17/1. / / 7/ /1 /9 7/ 1/1 70/ 17/17 /7 7/0 /1 7/ / 0/7 / 1/ /7 10/7 70/7 177/1 0/70 17/179 0/7 709/ 0/1

IMENSIONS AN WEIGTS (Bolted Bonnet) ASME CLASS (PN 0) ASME CLASS (PN 0) in/mm RF RTJ BW 0 1. 7 11.. 7.7 7 7.7 00 ½. 11..1 11. 1. 9. 9 0 9 9. 1.1. 17.7 11.1 0 7 1 1 1. 0.1 1.7 0 0 7 0 1.7 1. 1.7 1. 1.7 1 0 0 17. 1.11 17. 17.7 10 10 0.. 19.7 00 0 9 7 9....7 19.7.. 19.7 0 711 77 711. 7. 0 7 90 1 1... 7 0 10 1 17. 9.1.. 97 99 97 110 0 19 0 0.7 0 7. 1 1 00. 1.1 00 1 1 1 1 The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative.. W on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation. L W Weight RF/BW (lb/kg) /7 9/ / /1 /90 7/1 /1 /1 /10 7/9 7/ /11 9/7 0/1 /117 0/0 1/ 70/7 7

IMENSIONS AN WEIGTS (Bolted Bonnet) ASME CLASS 00 (PN 0) ASME CLASS 00 (PN 0) in/mm RF RTJ BW 0 1 11. 9 11. 9 11. 9 1.1 1 00 ½. 1 1.1 1 1.9 1 0 0 0.1 1.7 17 0 7 9 7 0 17 17.1 17.97 1 0 0 0 0 0 0.1 1 0 11 0 770.1. 991 10 10 9 9 900 7.7.1.9 10 00 00 0 0 91 9.7 1 1.1 1 1.7. 77 790 77 0 00 11.7.1. 9 1.7.. 0 7 9 91 9 1 1.7 9 9.1 9 1 7 991 99 991 10 1 1..1 0.9 19 9 9 9 1700 0 1.7 7 7. 7 70.7 119 00 119 The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative.. W on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation. L W Weight RF/BW (lb/kg) 7/ /0 99/ 0/ 1/17 9/ /7 10/1 19/ 190/17 1/1 / 0/97 /0 10/19 0/7

IMENSIONS AN WEIGTS (Bolted Bonnet) ASME CLASS 900 (PN 10) ASME CLASS 900 (PN 10) in/mm RF RTJ BW 0 1.7 7... 71. 17. 9. ½. 1. 1. 1. 19. 11.1 7 19 19 0.7 1 1.1 1 1 1.7 0 7 1 1 0. 1 1.1 1. 1.7 0 9 7 0 7.7.1 7.1 17.7 1 9 9 90.7.1 9. 19.7 10 1 70 7. 9 9.1 9. 19.7 00 190 77 70 77 97 9.7.1. 1 11.1.1. 9 9 9 10. 0. 0. 0.. 0 11 9 9 9 00 1... 110 110 0 1 1.7..9 19 19 170 0 17.. 7. 11 1 11 10 The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative.. W on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation. L W RF/BW (lb/kg) 1/ 9/ 1/1 /9 /0 /0 /19 / 17/ 0/ 771/711 0/ Weight 1/7 7/7 9

IMENSIONS AN WEIGTS (Bolted Bonnet) ASME CLASS 1 (PN ) ASME CLASS 1 (PN ) in/mm RF RTJ BW 0 1.7 7...1 71. 1.9 0 11.1 ½. 1. 1.1 1. 19.9 1.7 7 19 19 0.7 1. 1. 1. 9. 1.7 0 70 70 7 70 70. 1. 1.1 1.. 17.7 0 91 9 0.7..1.. 19.7 111 7 7 7 0. 7.7 7.7.. 10 1 70 711 70 9 00 7.7.1.7 9.9 00 17 1.7 9 9.1 9 0.7 991 01 991.....1 110 1 110 10 11. 9. 0. 9. 7. 0 9 9 7 9 0 1 1... 1 0 1 0 1 10 1.1 0. 1. 0..7 71 17 19 17 10 0 1.....9 1 1 1 1 1700 The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative.. W on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation. L W RF/BW (lb/kg) 11/10 7/ /1 11/ /91 7/1 /19 19/1 771/71 0/ Weight 1/ /

OVERVIEW (Pressure Seal Bonnet) 11 1 1 1 9 7 17 1 9 0 1 1 Part List 1 Body isc isc Nut Stem Bonnet Single isc Type Seal ring 7 Split ring Split ring 9 Yoke Stud 11 1 1 Nut Packing Gland Gland flange Fixture Block ouble isc Type 1 Stem Nut 17 andwheel Nut 1 andwheel 19 Bear Gland 0 Grease Nipple Nut 1 Bear Gear Eyes Bolt Nut Standards esign & Manufacture ASME B1., MSS SP Facetoface ASME B1. End imension ASME B1.(RF, RTJ) ASMEB1.7(RF,RTJ) ASME B1. (BW) Test & Inspection API 9, ASME B1. Typical Materials Body, Bonnet,isc Stem (Casting) A1 WCB, A1 CF, CF, CFM, CFM, A99 A, A, A LCB, LCC, LC (Forging) A, A0 LF, LF, LF, A1 F0, F0L, F1, F1L, F1, F, F,F11,F,F91, Monel, Inconel, astelloy A1 Fa, F0, F0L, F1, F1L, F1, F,F, Monel, Inconel, astelloy 11

IMENSIONS AN WEIGTS (Pressure Seal Bonnet) ASME CLASS 900 (PN 10) ASME CLASS 900 (PN 10) in/mm RF RTJ BW 0 1.7 7... 71. 1 17. 9. ½. 1. 1. 19. 11.1 7 19 0.7 1 1.1 1 1.7 0 7 1 0 0. 1 1.1. 1.7 0 9 7 0.7.1 17 7.1 17.7 1 9 90.7.1 0 9. 19.7 10 1 0 70 7. 9 9.1. 19.7 00 190 77 70 0 97 9.7.1 1. 1 77 11.1.1. 9 9 9 10. 0. 0. 9. 0 11 9 991 00 1.. 110 9 0 1 1.7. 19.9 170 0 17.. 11 1 7. 10 The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative.. W on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation. L W RF/BW (lb/kg) 1/ 9/ 1/1 /9 /0 /0 /19 / 17/ 0/ 771/711 0/ Weight 1/7 7/7

IMENSIONS AN WEIGTS (Pressure Seal Bonnet) ASME CLASS 1 (PN ) ASME CLASS 1 (PN ) in/mm RF RTJ BW 0 1.7 7...1 71. 1 1.9 0 11.1 ½. 1. 1.1 19.9 1.7 7 19 0.7 1. 1. 9. 1.7 0 70 70 7 0 70. 1. 1.1 1. 17.7 0 91 9 0 0.7..1 19. 19.7 111 7 7 0. 7.7.. 10 1 70 711 9 9 00 7.7.1 9.9 00 17 711 1.7 9 9.1 0.7 991 01... 9.1 110 1 991 10 11. 9. 0. 7. 0 9 9 7 7 0 1 1.. 7 1 0 1 0 119 10 1.1 0. 1..7 71 17 19 1 10 0 1....9 1 1 1 7 1700 The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative.. W on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation. L W RF/RTJ (lb/kg) 11/10 7/ /1 11/ /91 7/1 /19 19/1 771/71 0/ Weight 1/ / 1

IMENSIONS AN WEIGTS (Pressure Seal Bonnet) ASME CLASS (PN 0) ASME CLASS (PN 0) in/mm RF RTJ BW 0 1. 17.7 1 17. 11 79 19. 9 1.7 0 ½ 1.9 0. 0. 1 1. 17.7 0 0 0..7..7 17.7 0 7 7 0.7.. 1.97 19.9 0 7 7 7. 1. 1.77 1.. 9 79 07 0 00.7... 10 111 9 97 971 00.7 0. 0. 0.1 00 7 10 7.7 0 0. 7. 1 70 9 9 00.. 1 0 19 1 1 The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative.. W on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation. L W Weight RF/RTJ (lb/kg) /1 117/7 1/ 1/10 0/1 19/1 7/1 0/00 17/117 70/0 77/19 /77

VALVE FIGURE NUMBER OW TO ORER Nominal A Valve Type B Pressure Rating C End Conn. Construction E Body Material F Trim Material G Seat Oring I Operation Mode J e.g. 0 G L R 1 C 0 N 0 G NPS Class 00,Globe Valve, Straight pattern, Bolt bonnet, Raised Face, WCB body, Trim #, Non Renewable Seat, No Oring, Gear Operated. A Nominal 00 Special 0 (N 0) 07 RB 19 0 RB 1 RB F1 / (N ) R RB 0 (N 00) 0 0 (N ) (N 00) F 1/ (N 1) F ½ (N ) 09 RB 1 RB RB 0R 1/ RB R ½ RB (N ) (N 0) (N 0) F / (N 0) 0 (N 0) 11 RB RB RB R0 / RB R RB (N (N 00) (N 900) 01 1 (N ) 0 (N 0) 1 RB RB 7 RB R1 1 RB R RB (N 0) (N 0) (N 90) F 1 ¼ (N ) 0 (N ) 1 1 RB 7 RB 9 0 RB 1R 1 ¼ RB R RB 1 1 (N ) (N 700) 0 0 (N 00) F 1 ½ (N 0) 0 (N 10) 17 1 RB 9 0 RB 1 RB R 1 ½ RB R RB 1 1 (N ) 0 0 (N 70) More as such B Valve Type C Pressure Rating End Connection GL Globe Valve 0 Special 1 Class 10 Class Class 1 Class 00 7 Class 9 Class 900 Class 00 Class (PN1) Class (PN) X R J F T Special RF Flanged RTJ Flanged FF Flanged Threaded B S ButtWeld (BW) SocketWeld (SW) E Construction F Body Material GL 1 Straight pattern, Bolt bonnet Straight pattern, Welded Bonnet Straight pattern, Pressure Seal Y pattern, Bolt bonnet Y pattern, Welded Bonnet Y pattern, Pressure Seal X0 Special C1 A C A1 WCA C A1 WCB C A1 WCC M1 A1 F1 M A17 WC1 M A1 F M A17 WC M A1 F CL M A17 WC M7 A1 F11 CL M A17 WC M9 A1 F CL M0 A17 WC9 E1 A1 F E A17 C E A17 C E A1 F9 E A17 C E7 A1 F91 E A17 CA L1 A0 LF1 L A LCA L A0 LF L A LC L A0 LF L A LC L7 A0 LF L A LCB L9 A0 LF LA A0 LF9 LB A LC9 L A LCC S1 A1 F0 S A1 CF S A1 F0L S A1 CF S A1 F1 S A1 CFM S7 A1 F1L S A1 CFM S9 A1 F7 S0 A1 CFC 1 A1 F1 A99 A A1 F A99 A A1 F A99 A G Trim Material 00 Special 01 1Cr/1Cr/1Cr 0 0/0/0 0 // 0 ard 1Cr/ard 1Cr/1Cr 0 Stellite /Stellite/1Cr 0 1Cr/CuNi/1Cr 07 1Cr/ard 1Cr /1Cr 0 1Cr/Stellite /1Cr 09 Monel/Monel /Monel 1/1/1 11 Monel/Stellite/Monel 1/Stellite/1 1 Alloy 0/Alloy 0 /Alloy 0 Alloy 0/Stellite /Alloy 0 1 Stellite /Stellite /0 1 Stellite /Stellite /1 17 Stellite /Stellite /7 1 Stellite /Stellite /Alloy 0 0 0L /0L /0L 1 1L /1L /1L 1 /1 /1 F /F/F F1/F1 /F1 F /F /F 1L /Stellite /1L Stellite /Stellite /1L 0L /Stellite /0L Stellite /Stellite /0L 1

VALVE FIGURE NUMBER(CONT ) OW TO ORER Nominal A Valve Type B Pressure Rating C End Conn. Construction E Body Material F Trim Material G Seat Oring I Operation Mode J e.g. 0 G A R 1 C 0 R 0 NPS Class 00,Globe Valve, Straight pattern, Bolt bonnet, Raised Face, WCB body, Trim #, Non Renewable Seat, No Oring, Gear Operated. Seat I ORing J Operation R Renewable Metal 0 None B Bare Stem N Non Renewable Metal andwheel G Gear P Pneumatic E Electric C Gear w/ Chain N Pneumaticydraulic O Solid andwheel V andwheel with locking device OW TE FIGURE NUMBER SYSTEM WORKS Introduction. Figure number system uses a code consisting digits of letters and numbers to represent the specification of a valve of certain specification. Among digits, they are separated into groups identified by letters from A to J. Each group represents a parameter of a valve, together they contain almost all the essential parameters of the valve. Uses. Using the figure number system to generate a code is easy. Under each group, the code is shown on the left while on the right is the meaning of the code. Start by selecting a code from group A, through group J. If the specification of the valve is not listed, select the code for Special. The total length of the figure number shall be exactly digits. Cautions. It is advised that you have as detailed the specification as possible to generate a figure number, which means eliminating Specials. If you don t have enough specification or information about the valve you are ordering, or you re not sure how to use the system to generate a figure number, contact one of our sales representatives for help. Note: FBV reserves the right to make any modifications without notice. 1

Offshore Pipeline Onshore Refinery IMPORTANT NOTICE All dimensions in inches not listed in standards are converted from millimeters. Weights in lbs (pounds) are converted from kilograms. ata listed in the catalog, including dimensions, weights, specifications and other valve related data are intended to provide general information and guidance only. FBV Inc. assumes no responsibility for errors or inadequacy relevant to any information provided in this catalog. Any information provided in this catalog is subject to change without notice.