07/1 Fabricated Strainers Fabricated Y Strainers Style FSA & FSSA; 10#, 00# and 600# Flanged or Butt Weld Connections... Technical Data... Style FSA & FSSA; 900#, 100# and 00# Flanged or Butt Weld Connections...* Fabricated Basket Strainers Style FB & FBQ; 10#, 00# and 600# Flanged or Butt Weld Connections... Technical Data... Fabricated Tee Strainers Style T & TQ; 10#, 00# and 600# Flanged or Butt Weld Connections...6 Technical Data...7 Temporary Strainers - Cone, Basket, Plate Style TC Temporary Cone Strainer, 10#, 00# and 600#...8 Technical Data...9 Style TB Temporary Basket Strainer, 10#, 00# and 600#...8 Technical Data...9 Style TP Temporary Plate Strainer, 10#, 00# and 600#...8 Technical Data...9 Fabricated Quick Acting Line Blind Style FLB Fabricated Quick Acting Line Blind; 10# - 00#...10 Technical Data...11 Fabricated Flanged Offset Basket Strainers...1 Optional Features...1 Pressure Drop Charts Fabricated Y Strainers...1 Fabricated Basket Strainers...1 Fabricated Tee Strainers...16 Fabricated Temporary Cone/Basket Strainers...17-18 *For Additional Pressure Classes and Materials of Construction (Low Carbon Steel, Alloy 0, Hastelloy C76, Monel, and Duplex Stainless Steel) visit www.keckley.com KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY F1
07/1 Style FSA Fabricated Y-Strainer Carbon Steel 10 lb. Flanged & Butt Weld 00 lb. Flanged & Butt Weld 600 lb. Flanged & Butt Weld Fabricated Y-Strainer APPLICATIONS Steam, water, oil or gas where protection from foreign matter in a pipeline is required. CONSTRUCTION The Keckley Style FSA (carbon steel) & FSSA (stainless steel) fabricated Y-type strainers are normally supplied with a bolted (slip hinge) cover and are available with either flanged or butt weld connections. Flanges are raised face and drilled in accordance with ASME B16. and come standard with back-faced boltholes. Special dimensions are available. For additional pressure classes, flanges, and materials of construction (Low Carbon Steel, Alloy 0, Hastelloy C76, Monel, and Duplex Stainless Steel) visit www.keckley.com. Style FSSA Fabricated Y-Strainer Stainless Steel 10 lb. Flanged & Butt Weld 00 lb. Flanged & Butt Weld 600 lb. Flanged & Butt Weld FEATURES The Keckley Style FSA and FSSA strainer screens are piloted through the use of machined grooves in both the body and cover to ensure proper alignment. The cover gasket is designed for specific pressure and temperature ratings. Keckley Style FSA and FSSA strainers have studs and nuts and are furnished with a blow down plug as standard. Blind covers are available upon request. SCREENS Standard screens are perforated 0 stainless steel and are spot welded for maximum strength. Different size perforations and meshes are available in stainless steel, monel, and brass to meet specific media requirements. If media is not indicated, ⅛ perforated 0 stainless steel screens will be supplied. SELF CLEANING Self cleaning of the Style FSA and FSSA strainers are accomplished by opening the valve or drain plug connected to the blow off port. Warning: See Maintenance Instructions on page S6 of the Strainer Information Section for additional precautions and detailed information on servicing the strainer. F KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY
0/1 B 1 A 8 7 Notes: Consult factory for additional pressure classes, flange types, pipe grades, and materials of construction. 6 E Style FSA Fabricated Y- Strainer Carbon Steel TECHNICAL DATA DIMENSIONS AND WEIGHTS PARTS LIST ITEM DESCRIPTION MATERIAL 1 Pipe Carbon Steel Pipe (ASTM A ) RFSO Flange Carbon Steel (ASTM A 10) B16. Screen Stainless Steel (0) - 1/8 Perforations Gasket Fiber Blind Flange (Cover) Carbon Steel (ASTM A 10) 6 000# NPT Half Coupling Carbon Steel (ASTM A 10) 7 Stud Carbon Steel (ASTM A 19, Grade B7) 8 Nut Carbon Steel (ASTM A 19, Grade H) Options: Other meshes, perforations, and screen materials are available. Style FSSA Fabricated Y- Strainer Stainless Steel PARTS LIST ITEM DESCRIPTION MATERIAL 1 Pipe Stainless Steel (ASTM A 1, Grade TP-16) RFSO Flange Stainless Steel (ASTM A 18, Grade F-16)B16. Screen Stainless Steel (0) - 1/8 Perforations Gasket Fiber Blind Flange (Cover) Stainless Steel (ASTM A 18, Grade F-16) 6 000# NPT Half Coupling Stainless Steel (ASTM A 18, Grade F-16) 7 Stud Carbon Steel (ASTM A 19, Grade B7) 8 Nut Carbon Steel (ASTM A 19, Grade H) Options: Other meshes, perforations, and screen materials are available. DIMENSIONS SIZE A B E WEIGHTS 10# 00# 10# 00# 10# & 00# 10# 00# in mm in mm in mm in mm in mm in mm lbs kgs lbs kgs 100 16 06 18 7 1 0 1 0 1 100 10 6 1 19 8 1 1 6 1 81 1 10 9 00 91 6 10 9 610 16 06 19 8 1 17 79 6 10 8 00 6 660 8 711 19 8 9 1-1/ 0 80 17 10 186 10 0 0 76 1 787 610 610 1-1/ 0 90 177 600 7 1 00 889 6 91 6 660 7 686 1-1/ 0 60 80 81 1 0 9 991 1 101 0 76 81 0 800 6 1100 99 16 00 11 7 119 86 6 91 0 1000 100 680 18 0 6 1168 0 170 86 6 91 0 110 177 80 0 00 11 197 8 96 0 1016 0 100 6 100 9 600 60 1 6 17 1118 6 1168 0 000 907 100 106 0* 70 7 189 7 1880 0 170 16 0 000 161 10 6 *0 Flanges are RFWN Series B. Certified dimensional drawings are available upon request. This table reflects only the nearest metric equivalents. COVER WEIGHTS Size 6 8 10 1 1 16 18 0 0 FLOW COEFFICIENTS Size C v Size C v Size C v 8 79 1 18 0 90 10 1 16 878 661 1 170 18 79 0 987 10 00 lbs 1 1 19 0 6 90 106 10 16 0 10 kgs 6 7 9 1 0 9 1 8 9 7 100 68 lbs 1 9 8 81 11 16 0 80 90 0 kgs 11 1 18 6 7 7 100 17 17 9 KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY F
0/1 Style FB Fabricated Basket Strainer Bolted Cover 10 lb. Flanged & Butt Weld 00 lb. Flanged & Butt Weld 600 lb. Flanged & Butt Weld Fabricated Basket Strainer APPLICATIONS Steam, water, oil or gas where protection from foreign matter in a pipeline is required. CONSTRUCTION The Keckley Style FB family of fabricated basket strainers are available in carbon steel or stainless steel. Either flanged or butt weld connections are furnished. These basket strainers are available with a Quick Open Cover (FB-Q), Bolted Slip Hinge Cover (FB-H), or Integral Swing Arm Davit Assembly (Style FB-D). Flanges are raised face and drilled in accordance with ASME B16. and come standard with back-faced boltholes. Special dimensions are available. For additional pressure classes, flanges, and materials of construction (Low Carbon Steel, Alloy 0, Hastelloy C76, Monel, and Duplex Stainless Steel) visit www.keckley.com. Style FB-Q Fabricated Basket Strainer Quick Open Cover 10 lb. Flanged & Butt Weld 00 lb. Flanged & Butt Weld 600 lb. Flanged & Butt Weld BASKETS Baskets are perforated 0 stainless steel and are spot welded for maximum strength. Different size perforations and meshes are available in stainless steel, monel, and brass to meet specific media requirements. If media is not indicated, ⅛ perforated 0 stainless steel baskets will be supplied. CLEANING Cleaning of the Style FB strainer is accomplished by removing the cover and pulling out the basket. Warning: See Maintenance Instructions on page S6 of the Strainer Information Section for additional precautions and detailed information on servicing the strainer. Inlet Outlet F KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY
0/1 Inlet 1 " NPT Vent A 6 7 8 10 Outlet 1 Cb B Style FB Fabricated Basket Strainer TECHNICAL DATA DIMENSIONS AND WEIGHTS PARTS LIST ITEM DESCRIPTION MATERIAL 1 Pipe Carbon Steel 0 SS 16 SS * RFSO Flange Carbon Steel 0 SS 16 SS Nozzle Carbon Steel 0 SS 16 SS Basket Stainless Steel (0) - 1/8 Perforations Gasket Fiber 6 Blind Flange (Cover) Carbon Steel 0 SS 16 SS 7 Studs Carbon Steel (ASTM A 19, Grade B7) 8 Nuts Carbon Steel (ASTM A 19, Grade H) 9 Weld Cap Carbon Steel 0 SS 16 SS 10* RFSO Flange Carbon Steel 0 SS 16 SS *0 & Larger Flanges are RFWN Series B. Options: Other meshes, perforations, and screen materials are available. 9 Cover Options Cq D Notes: Style FB-Q Style FB-H Style FB-D Consult factory for additional pressure classes, flange types, pipe grades, and Quick Open Cover Bolted Slide Hinge Cover Integral Davit Swing Arm materials of construction. Furnished standard with 1/ NPT Vent. DIMENSIONS SIZE A Cb Body Housing B Cq D 10# 00# 10# 00# (Pipe Size) in mm in mm in mm in mm in mm in mm in mm in mm in mm 100 16 06 17 1 6 10-1/ 67 1-1/ 18 11 79 1 8 00 1 16 06 17 1 81 11 79 1 0 1 0 1 8 00 6 10 0 08 1 17 11 79 1 0 1 0 1 10 0 8 00 9 8 1 1 0 1 6 1 81 1-1/ 0 1 00 10 0 81 88 6 1 0 1 81 17 1-1/ 0 16 00 1 00 889 6 91 8 711 1 81 17 19 8 1-1/ 0 18 0 1 0 7 90 8 96 88 16-1/ 19 18-1/ 70 0 08 0 0 00 16 00 1067 109 6 91 17-1/ 19-1/ 9 8 0 600 18 0 1067 109 9 991 18-1/ 70 0 08 610 0 600 0 00 109-1/ 110 1118 0 08 6 610 0 0 70 600 8 119 9 1 1118 1 7 686 7 686 0 0 70 0 70 60 1 6 1600 17 1 787 889 88 0 6 900 SIZE WEIGHT FB FB-Q Total Weight Cover Weight Total Weight 10# 00# 10# 00# 10# 00# FB-Q Force required to lift cover in mm lbs kgs lbs kgs lbs kgs lbs kgs lbs kgs lbs kgs lbs kgs 100 11 96 89 11 7 1 81 7 17 71 180 8 9 1 0 11 10 11 7 1 81 7 170 77 10 9 9 6 10 9 1 1 191 70 1 6 101 60 118 1 8 00 0 18 91 68 1 6 18 8 97 1 160 1 7 10 0 60 86 96 6 180 8 1 1 196 1 6 1 1 00 76 7 18 8 0 100 1 188 9 78 1 1 0 91 1 190 71 8 19 1 6 97 98 0 18 16 00 1 600 1 10 0 19 800 6 870 9 1 606 8 6 18 0 17 616 87 118 0 19 800 6 90 10 101 681 8 6 0 00 19 881 69 1676 6 19 67 119 1 181 8 76 600 10 96 07 188 6 19 67 170 61 19 99 76 0 70 06 189 6100 767 890 0 191 871 0 11 11 6 19 68 This table reflects only the nearest metric equivalents. KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY F
07/1 Style T Fabricated Tee Strainer Bolted Cover 10 lb. Flanged & Butt Weld 00 lb. Flanged & Butt Weld 600 lb. Flanged & Butt Weld Fabricated Tee Strainer APPLICATIONS Steam, water, oil or gas where protection from foreign matter in a pipeline is required. CONSTRUCTION The Keckley Style T Tee strainers are supplied with weld neck flange or butt weld connections. Ring Type Joint connections are also available; for ring type joint specify ring number and style. The Style T & TQ strainers are suitable for either horizontal or vertical (downward flow) piping. Special dimensions are available. For additional pressure classes, flanges, and materials of construction (Low Carbon Steel, Alloy 0, Hastelloy C76, Monel, and Duplex Stainless Steel) visit www.keckley.com. Style TQ Fabricated Tee Strainer Quick Open Cover 10 lb. Flanged & Butt Weld 00 lb. Flanged & Butt Weld 600 lb. Flanged & Butt Weld BASKETS Standard baskets are ⅛ perforated 0 stainless steel (approximately 6 mesh) and are spot welded for maximum strength. Different size perforations and meshes are available in stainless steel, monel, and brass to meet specific media requirements. SELF CLEANING Self cleaning of the Style T & TQ strainers is accomplished (depending upon orientation) by either opening the valve or drain plug connected to the blow off port or removing the cover and pulling out the basket. Warning: See Maintenance Instructions on page S6 of the Strainer Information Section for additional precautions and detailed information on servicing the strainer. F6 KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY
0/1 7 6 NPT Vent 1 Cb Style T Fabricated Tee Strainer TECHNICAL DATA DIMENSIONS AND WEIGHTS PARTS LIST ITEM DESCRIPTION MATERIAL 1 Body Carbon Steel 0 SS 16 SS Basket Stainless Steel (0) - 1/8 Perforations Gasket Fiber Blind Flange (Cover) Carbon Steel 0 SS 16 SS * RFWN Flange Carbon Steel 0 SS 16 SS 6 Studs Carbon Steel (ASTM A 19, Grade B7) 7 Nuts Carbon Steel (ASTM A 19, Grade H) *0 & Larger Flanges are RFWN Series B. Options: Other meshes, perforations, and screen materials are available. Cover Options NPT Drain AF Notes: Cq Consult factory for additional pressure classes, flange types, pipe grades, and materials of construction. Furnished standard with 1/ NPT Vent.(Sizes - Style TQ Style TD 1/8 NPT Vent.) Quick Open Cover Integral Davit Swing Arm DIMENSIONS SIZE AF Cb Cq AW 10# 00# 10# 00# 10# 00# Drain Size in mm in mm in mm in mm in mm in mm in mm in mm in mm 0 10 10-1/ 67 17 -/ 16 6-1/8 16 -- -- -- -- 1/ 1-1/ 6 11-1/ 9 1 0 6 1 6-/8 168 7 178 -- -- -- -- 1/ 1 80 1-1/ 11 1 0 6-/ 171 7-1/8 181 7-/8 19 -- -- -- -- / 0 100 1-1/ 6 1 81 8-1/ 10 8-1/8 06 8-/ -- -- -- -- / 0 1 16-/ 17-1/ 9-/ 8 9-/8 8 10-1/8 7 -- -- -- -- 1 6 10 18-1/ 6 19 8 11-1/ 86 10-1/8 7 11 79 9-1/ 9-/8 0 8 00 9 -/ 78 1 6 1-1/8 08 1 0 10-/8 70 11-1/8 8 0 10 0 6 6-1/ 667 17 1-/ 9 1 81 1-1/8 1-1/ 0 1 00 9 77 0-1/ 768 0 08 1-/ 00 17-1/8 1-/8 97 1-/8 97 0 1 0 81-1/ 8 9 17-/8 1 18-/ 76 16-1/8 10 17-1/8 0 16 00 86-1/ 90 610 18-1/ 70 0 08 18-/8 7 18-/8 7 0 18 0 8 96 9-1/ 100 7 686 0-/8-1/8 6 0-7/8 0 1-1/8 7 0 0 00 1-/8 101 -/ 1086 0 76 -/8 68-7/8 606 -/8 600 -/8 600 0 600 6 1168 7-1/ 100 86-7/8 6 6-/8 670 7-1/8 689 7-1/8 689 0 0 70 0 76-1/ 876 9 7-7/8 708 1-7/8 69 -- -- -- -- 0 SIZE WEIGHT T TQ Total Weight Cover Weight Total Weight 10# 00# 10# 00# 10# 00# TQ Force required to lift cover in mm lbs kgs lbs kgs lbs kgs lbs kgs lbs kgs lbs kgs lbs kgs 0 9 1 9 18 8 -- -- -- -- -- -- -1/ 6 7 1 -- -- -- -- -- -- 80 9 7 78 9 16 7 -- -- -- -- -- -- 100 9 117 17 8 8 1 -- -- -- -- -- -- 1 100 18 7 0 9 7 17 -- -- -- -- -- -- 6 10 16 6 06 9 7 1 0 9 19 9 8 00 0 10 6 7 1 81 7 1 70 1 100 9 10 0 9 179 81 18 70 1 6 107 11 11 1 1 00 0 6 70 18 1 6 18 8 161 6 10 1 7 1 0 7 9 10 69 10 6 0 11 6 11 66 8 0 9 16 00 96 9 17 78 180 8 1 1 6 78 6 6 1 18 0 119 1 17 787 0 100 1 188 70 0 110 1 0 00 1 69 16 98 8 19 1 1100 99 1600 76 0 18 600 00 10 170 18 0 19 800 6 1600 76 10 97 8 6 0 70 1919 870 09 181 1 19 67 -- -- -- -- -- -- This table reflects only the nearest metric equivalents. KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY F7
07/1 Style TC Temporary Cone Strainer 10 lb.,00 lb., & 600 lb. Fabricated Temporary Cone, Basket, & Plate Strainers APPLICATIONS Steam, water, oil or gas where protection from foreign matter in a pipeline is required. These strainers are installed between flanges for inexpensive protection of mechanical equipment. CONSTRUCTION The Keckley Style TC, TB & TP strainers are available in carbon steel, stainless steel, and other alloys. Screens are available perforated, mesh, or mesh lined to meet specific media requirements. Style TB Temporary Basket Strainer 10 lb.,00 lb., & 600 lb. STANDARD SCREENS The Keckley Style TC, TB & TP strainers are normally supplied with ⅛ diameter holes on /16 centers. WHEN ORDERING SPECIFY Pipe Size Style Pressure Rating Perforation or Mesh Size If mesh lined, specify direction of flow. Material of Construction Style TC Temporary Cone Strainer 10 lb.,00 lb., & 600 lb. F8 KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY
0/1 Unless otherwise specified, standard ⅛ perforations, 10-00 lb. flanges and 10% open area will be supplied. L TECHNICAL DATA DIMENSIONS AND WEIGHTS Style TC, TB & TP Fabricated Temporary Cone, Basket & Plate Strainer 10 lb., 00 lb. & 600 lb. Cast Steel & Stainless Steel L A B A B A B C 1" " Style TC Cone Strainer Style TB Basket Strainer Style TP Plate Strainer DIMENSIONS SIZE A B C 10-00 (std) 600 lb. All Flange Ratings All Flange Ratings in mm in mm in mm in mm in mm 1-1/ 0-1/ 8 -/8 9 1-1/ / 19 0 10-1/ 108 1-/ 1-1/ 6 -/ 11 17-1/ 7 1-1/ 80-1/ 1 -/ 16 -/ 70 1-1/ 8 100 6-/ 171 7-1/ 191 -/ 9 1 1 7-/8 19 9-/8 8 -/8 117-1/ 6 6 10 8-/8 19 10-/8 6 -/8 17 76 8 00 10-7/8 76 1-1/ 18 7-/8 18 10 10 0 1-1/ 7 1-/8 97 9-/8 8 17 1 00 16 06 17-7/8 11 79 6 1 1 0 17-/8 1 19 8 1-1/ 11 7 178 16 00 0-1/8 11 1-7/8 6 1 6 8 0 18 0 1-1/ 0 -/ 60 1-/ 00 9 9 0 00-1/ 97 6-/8 676 17-1/ 10 600 7-7/8 708 0-7/8 78 1-1/ 0 1 0 L 1/8 PERFORATED ON /16 CENTERS SIZE (% OPEN AREA COMPARED TO CROSS SECTION OF SCHEDULE 0 PIPE) Cones Baskets 100% 10% (std) 00% 100% 10% (std) 00% in mm in mm in mm in mm in mm in mm in mm 1-1/ 0 -/16 81 10 17 -/ 70-7/8 7 76 0-1/ 89 6 1 8 0 76-1/ 89 10-1/ 6-1/16 10 6-1/ 19 8 0 -/16 81-7/8 98-1/ 11 80-1/ 108 6-/ 171 9 9-1/ 89-7/8 98-1/ 10 100 17 10 1 0 10 17 7 178 1 6 1 1 0 1 6 17 6-/8 16 9 9 6 10 7 178 1 0 18 7 6 1 7-/ 197 11 79 8 00 8-/16 08 17 8 6-1/8 16 9-/ 8 1 6 10 0 1 0 9 8 711 7-1/ 191 1-/8 1 18 7 1 00 1 0 6 660 86 9 9 1-/ 7 0 08 1 0 1 81 7 686 6 91 10 1-7/8 0 1 16 00 17 0 76 0 1016 10 18-/8 67 8 18 0 19 8 889 6 1168 1 0 0-7/8 0 7 686 0 00 1 9 991 1 19 1 6-1/ 97 1 787 600 6 11 61 19 16 06 8-/8 71 7 90 Consult factory for sizes not shown. This table reflects only the nearest metric equivalents. KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY F9
07/1 Style FLB Fabricated Line Blinds 10 lb. to 00 lb. Flanged or Butt Weld Quick Acting Line Blinds APPLICATIONS Keckley s Quick Acting Line Blinds are designed for applications where positive, visual indication of line closure/opening are required. FEATURES The position of the spectacle plate indicates whether the line is open or closed, reducing or eliminating the possibility of costly or dangerous situations. Keckley Quick Acting Line Blinds utilize O-ring seals to achieve the most effective shutoff. Our standard O-ring is located in the dovetail groove in both faces of the spectacle plate. Two stainless steel guide pins are located in the face of the body flange to ensure accurate alignment of the spectacle plate with the bore. With the Keckley Quick Acting Line Blind, one operator can change a 6 Line Blind in five minutes without the need for special tools as compared to a typical 6 spectacle blind, which takes two maintenance men approximately 1-1 hours to change over. CONSTRUCTION The standard model has a carbon steel body and zinc plated carbon steel trim. Stainless steel and other alloys are also available to meet your specific requirements. All units are available flanged or butt weld. F10 KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY
0/1 1 7 7 1 E TECHNICAL DATA DIMENSIONS AND WEIGHTS Style FLB Fabricated Line Blinds 10 lb. to 00 lb. Flanged & Butt Weld PARTS LIST A F C ITEM DESCRIPTION MATERIAL 1 RFWN Flange Carbon Steel (ASTM A 10) B16. Spectacle Plate Carbon Steel (ASTM A 6) * O-ring Buna-N Pivot Bolt / Spreader Bolt Carbon Steel (SAE J 9, Grade 8) Grease Fitting (Qty. ) 6 Spring Pins Stainless Steel (0) *Buna-N o-ring good for temperatures up to 0 F. For higher temperatures, consult factory. D Pipe Size 6 B DIMENSION - 10# CLASS A B C D E F in mm in mm in mm in mm in mm in mm in mm 1 9 9-1/ 108-1/8 1-9/16 0 -/8 111 -/8 1 1-1/ 0 10 17-1/ 6 1-1/16 9-1/ 10 7-1/8 181 0 10-/8 6 6 1 76 -/8 60 6-/ 171 8-/ -1/ 6 11-/8 89 7 178-1/ 89 -/ 70 7-7/8 00 10-1/ 60 80 11-/8 89 7-1/ 191 -/ 9 76 8-/8 19 11-1/ 86 100 1-1/ 18 9 9-1/ 11 -/ 9 10-7/8 76 1-1/ 6 1 1-/8 71 10 17-1/ 108 10-7/8 76 1-1/ 6 6 10 1-/8 71 11 7-1/ 10 -/ 11 1-1/16 1 18-1/8 60 8 00 16-/8 1-1/ 6-/ 171-7/8 19 17-/16 7 -/8 7 10 0 16-/ 16 06 8 0 7-1/8 181 0-7/8 0 7-1/ 699 1 00 18-7/8 79 19 8 9-1/ 1 8-1/ 16 6 88 1 0 0-7/8 0 1 10-1/ 67 9-/ 8 7-1/ 699 6-1/ 91 16 00 1-1/ 97 11-/ 99 10-/8 70 1-1/ 79 1-1/ 108 18 0-1/8 87 6 1-1/ 18 11-/8 89-7/16 89-1/8 111 0 00 610 7-1/ 699 1-/ 0 1-1/ 18 6-1/16 9 8-/8 1 600 -/8 6 81 16 07 1-/ 7-1/ 110 7-1/ 161 Certified dimensional drawings are available upon request. This table reflects only the nearest metric equivalents. WEIGHTS Size 1 1-1/ -1/ 6 8 10 1 1 16 18 0 Butt Weld lbs 7 9 1 6 8 6 10 1 8 0 07 69 8 81 kgs..1 6. 10 1 17 8 7 6 108 17 18 1 6 86 Flanged lbs 1 17 6 9 71 9 11 188 1 1 0 687 799 976 187 kgs.9 7.7 1 0 8 11 188 0 1 6 69 KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY F11
0/1 Style FBO Fabricated Basket - Offset Bolted Cover 10 lb. Flanged & Butt Weld 00 lb. Flanged & Butt Weld 600 lb. Flanged & Butt Weld Flanged Offset Basket Strainer APPLICATIONS Water, oil or gas where protection from foreign matter in a pipeline is required. CONSTRUCTION Theses strainers can be fabricated to any specifications. The offset flanges allow easy connection for a wide variety of pump installations. These strainers are available in carbon steel, 0 stainless steel, and 16 stainless steel. FEATURES Theses strainers have been designed to answer the specific need for an extremely large capacity strainer requiring minimum down time for cleaning and are ideal for very fine straining. The basket and seat are designed to eliminate sediment by-pass for particle sizes as small as five micron. The low outlet design lends itself to pump installations where the suction is located close to the floor. BASKETS Standard baskets are perforated 0 stainless steel. All baskets are spot welded for maximum strength. Different size perforations and meshes are available in stainless steel, monel, and brass to meet specific media requirements. If media is not indicated, ⅛ perforated 0 stainless steel baskets will be supplied. F1 KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY
0/1 TECHNICAL DATA DIMENSIONS AND WEIGHTS Optional Features SPECIAL OPTIONS ON FABRICATED STRAINERS Differential Pressure Gauges Custom Nozzle Positions Custom Blowdown Connections Custom Venting Custom Basket Configurations Special Coatings and Galvanizing Custom Floor Stands and Mounting Hardware Oversized Bodies Differential Pressure Gauge DATA REQUIRED WHEN ORDERING Inlet and Outlet Size End Connections (Flange or Butt Weld) If Offset, Specify Dimensions Body Rating Design Pressure and Temperature Capacity Requirements Screen Material and Perforation/Mesh Size Integral Davit Swing Arm Special Drains KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY F1
0. 9 10 0/1 PRESSURE DROP CHART Fabricated Y-Type Strainers This pressure drop chart is based on the flow of clean water through the Keckley fabricated Y-Type strainers with a ⅛ perforated screen. TO USE CHARTS: Find your desired rate of flow (GPM) on the left hand side of the chart. Follow its corresponding horizontal line to the point where it intersects the diagonal line indicating the strainer pipe size. From this point of intersection, follow the vertical line down to the bottom of the chart to determine the approximate pressure drop. CORRECTION FACTORS: For finer mesh baskets that are backed with a perforated sheet, multiply the pressure drops shown at right by the following: 0 mesh x 1. 60 mesh x 1. 80 mesh x 1.6 100 mesh x 1.7 0000 0000 10000 9000 8000 7000 6000 000 000 000 000 1000 900 800 700 600 00 00 00 00 100 90 80 70 60 0 0.1 0. 0. 0. 0.6 0.7 0.8 0.9 1 6 7 8 FLOW RATE - [GPM] 0" " 0" 18" 16" 1" 1" 10" 8" 6" " PRESSURE LOSS - [PSI] F1 KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY
0. 0.9 9 10 07/1 PRESSURE DROP CHART Fabricated Basket Strainers This pressure drop chart is based on the flow of clean water through the Keckley fabricated basket strainers with a ⅛ perforated basket. TO USE CHARTS: Find your desired rate of flow (GPM) on the left hand side of the chart. Follow its corresponding horizontal line to the point where it intersects the diagonal line indicating the strainer pipe size. From this point of intersection, follow the vertical line down to the bottom of the chart to determine the approximate pressure drop. CORRECTION FACTORS: For finer mesh baskets that are backed with a perforated sheet, multiply the pressure drops shown at right by the following: 0 mesh x 1. 60 mesh x 1. 80 mesh x 1.6 100 mesh x 1.7 FLOW RATE - [GPM] 70000 60000 0000 0000 0000 0000 10000 9000 8000 7000 6000 000 000 000 000 1000 900 800 700 600 00 00 0" " 0" 18" 16" 1" 1" 10" 00 00 100 0.1 0. 0. 0. 0.6 0.7 0.8 1 6 7 8 8" 6" " PRESSURE LOSS - [PSI] KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY F1
0. 9 10 0/1 PRESSURE DROP CHART Fabricated T-Type Strainers This pressure drop chart is based on the flow of clean water through the Keckley Fabricated T-Type strainers with ⅛ perforations (approximately 6 mesh). 70000 60000 0000 0000 0" 8" " 0" TO USE CHARTS: Find your desired rate of flow (GPM) on the left hand side of the chart. Follow its corresponding horizontal line to the point where it intersects the diagonal line indicating the strainer pipe size. From this point of intersection, follow the vertical line down to the bottom of the chart to determine the approximate pressure drop. CORRECTION FACTORS: For finer mesh baskets that are backed with a perforated sheet, multiply the pressure drops shown at right by the following: 0 mesh x 1. 60 mesh x 1. 80 mesh x 1.6 100 mesh x 1.7 FLOW RATE - [GPM] 0000 0000 10000 9000 8000 7000 6000 000 000 000 000 1000 900 800 700 18" 16" 1" 1" 10" 8" 6" " " 600 00 00 00 00 100 0.1 0. 0. 0. 0.6 0.7 0.8 0.9 1 6 7 8 PRESSURE LOSS - [PSI] F16 KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY
0. 0.9 9 10 07/1 PRESSURE DROP CHART Fabricated Temporary Cone/Basket Strainers This pressure drop chart is based on the flow of clean water through the Keckley strainer styles listed above with screen perforations ranging from /6 through 1/8. TO USE CHARTS: Find your desired rate of flow (GPM) on the left hand side of the chart. Follow its corresponding horizontal line to the point where it intersects the diagonal line indicating the strainer pipe size. From this point of intersection, follow the vertical line down to the bottom of the chart to determine the approximate pressure drop. CORRECTION FACTORS: For finer mesh baskets that are backed with a perforated sheet, multiply the pressure drops shown at right by the following: 0 mesh x 1. 60 mesh x 1. 80 mesh x 1.6 100 mesh x 1.7 FLOW RATE - [GPM] 000 1000 900 800 700 600 00 00 00 00 100 90 80 70 60 0 0 0 0 10 9 8 7 6 6" " " " ½" " 1½" 1¼" 1" ¾" 1 0.1 0. 0. 0. 0.6 0.7 0.8 1 6 7 8 PRESSURE LOSS - [PSI] KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY F17
0. 0.9 9 10 07/1 PRESSURE DROP CHART Fabricated Temporary Cone/Basket Strainers This pressure drop chart is based on the flow of clean water through the Keckley strainer styles listed above with screen perforations ranging from /6 through 1/8. 0000 0000 0000 6" 0" TO USE CHARTS: Find your desired rate of flow (GPM) on the left hand side of the chart. Follow its corresponding horizontal line to the point where it intersects the diagonal line indicating the strainer pipe size. From this point of intersection, follow the vertical line down to the bottom of the chart to determine the approximate pressure drop. CORRECTION FACTORS: For finer mesh baskets that are backed with a perforated sheet, multiply the pressure drops shown at right by the following: 0 mesh x 1. 60 mesh x 1. 80 mesh x 1.6 100 mesh x 1.7 FLOW RATE - [GPM] 0000 10000 9000 8000 7000 6000 000 000 000 000 1000 900 800 700 600 00 " 0" 18" 16" 1" 1" 10" 8" 00 00 00 0.1 0. 0. 0. 0.6 0.7 0.8 1 6 7 8 PRESSURE LOSS - [PSI] F18 KECKLEY COMPANY 00 Cleveland Street Skokie, Illinois 60076 1-800-KECKLEY