WELD THE WORLD Product Range 11_2015 English

WELD THE WORLD Product Range 11_2015 English

Weco has been producing and selling for 15 years welding machines. All our welding machines are 100 % in Europe (North of Italy) produced. A wide range of welding machines have been by Weco developed MMA - TIG (DC and AC/DC) - MIG/MAG - MIG/MAG PULS. Service and relations from a partnership point of view. Each year we invest over 10% of our turnover in the design and development of technologies that can innovate our products. 11_2015 2

Index MMA PAG. Discovery 150TP 8 Multipower 184 9 Discovery 200S 10 Discovery 250 11 Cruiser 402 12 Cruiser 502 13 TIG DC Discovery 161T 16 Discovery 171T MAX 17 Multipower 204T 18 Discovery 220T 19 Discovery 300T 20 Cruiser 322T 21 Cruiser 402T 22 Cruiser 502T 23 TIG AC/DC Discovery 200AC/DC 26 Discovery 221AC/DC 27 Discovery 300AC/DC 28 Cruiser 322AC/DC 29 Cruiser 402AC/DC 30 Cruiser 502AC/DC 31 MIG-MAG Synergic Pioneer 321MKS 34 Pioneer 401MKS 35 Pioneer 321MSR 36 Pioneer 401MSR 38 MULTIFUNCTION Discovery 161MF (TP) 42 MicroMAG 301 Plus 43 MicroMAG 302MFK 44 Cruiser 402 SYNERGIC 46 Cruiser 502 SYNERGIC 46 Cruiser 402 SYNERGIC TWIN FEEDER 48 Cruiser 502 SYNERGIC TWIN FEEDER 48 Cruiser 402T SYNERGIC 50 Cruiser 502T SYNERGIC 50 Cruiser 402T SYNERGIC TWIN FEEDER 52 Cruiser 502T SYNERGIC TWIN FEEDER 52 Cruiser 402AC/DC SYNERGIC 54 Cruiser 502AC/DC SYNERGIC 54 Cruiser 402AC/DC SYNERGIC TWIN FEEDER 56 Cruiser 502AC/DC SYNERGIC TWIN FEEDER 56 MIG MAG PULSE / DOUBLE PULSE Micropulse 302MFK 60 Pioneer Pulse 321MKS 62 Pioneer Pulse 321MSR 64 Power Pulse 402 66 Power Pulse 502 66 Power Pulse 402 TWIN FEEDER 68 Power Pulse 502 TWIN FEEDER 68 Power Pulse 402T 70 Power Pulse 502T 70 Power Pulse 402T TWIN FEEDER 72 Power Pulse 502T TWIN FEEDER 72 Power Pulse 402AC/DC 74 Power Pulse 502AC/DC 74 Power Pulse 402AC/DC TWIN FEEDER 76 Power Pulse 502AC/DC TWIN FEEDER 76 PLASMA CUTTING Discovery 35P 80 ACCESSORIES COOLING UNITS 82 SLIDING KIT / TROLLEY 83 REMOTE CONTROLS 86 KIT DIGIMANAGER / KIT PUSH PULL 87 OVERCUT 88 GAS REGULATORS 89 SUITCASES 90 ELECTRODE HOLDERS - EARTH CABLES 91 TIG TORCHES 92 MIG MAG TORCHES 94 SOFTWARE UPGRADING KIT 96 FEEDING ROLLS 97 11_2015 3

Welding process MMA TIG MIG MAG PULSE DOUBLE PULSE ARC AIR PLASMA Power Inverter Inside Lower Energy Demand Technology es. Overall weight reduction for easier transportation and movement. peatable Reworking time and money saving. Real lower overall electric consumption. W.ECO Technology Inside Lower harmonic current emissions emissions. W.ECO PFC POWER FACTOR CORRECTOR: Lower harmonic current emissions Lower input current Total Protection Maximum reliability A built-in Total Protection Device saves the inverter components from overvoltage and makes the unit suitable for use with unstable power supply and motor-generators. Volt Reduction Device Maximum safety Function VRD (Volt Reduction Device) reduces automatically the voltage of the welding machine during the Standby mode in order to allow the processing in those building site where low voltages are demanded for safety HAC Hybrid Arc Control ing in any working conditions. 11_2015 4

Special Functions Digital control and excellent welding with cellulosic electrodes is an optimized combination also for piping and Oil & Gas industry applications. input on workpiece. only welding current. increases the welding current as the arc voltage decreases and reduces the welding current if the arc voltage increases. The Q-Spot (Quick Spot) function makes it possible to minimise tacking times for light gauge sheet metal. 11_2015 5

Special Functions This makes it possible to create a highly penetrative and precise fusion bath so that very light gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC - TIG welding. This allows to obtain high welding speed and creating the weld puddle rapidly on a cold workpiece. Questa funzionalità permette di ottenere elevate velocità di saldatura e creando più velocemente il bagno di saldatura a pezzo freddo. E inoltre possibile la saldatura di spessori più grossi con amperaggi modesti. 1. Higher execution speed 2. Higher deposition rate 3. Lower heat input and less plastic deformation 4. Better mechanical properties 6. Lower production costs and depreciation 2 - Higher execution speed 3 - Higher arc stability also with longer stick-out Approvals The complete WPQR packet for execution class 1 and 2 up to S355 is available for all MIG/MAG power sources in Weco s range. 11_2015 6

MMA 11_2015 7

Discovery 150TP : MMA - TIG DC LIFT EN: EN 60974-1 - EN 60974-10 1 x 230Vac Discovery 150TP is an advanced inverter power source characterized by a robust and reliable industrial construction. It is recommended for MMA welding and TIG DC applications providing excellent arc characteristics. Discovery 150TP is ideal for operations on site like basic maintenance and building construction. A built-in Total Protection Device saves the inverter components from overvoltage and makes the unit suitable for use with unstable power supply and motor-generators. Factory optimized Hot Start, Arc Force and Anti Sticking al- Discovery 150TP Lift Start function guarantees arc ignition without damaging the tungsten electrode. Handle and Shoulder Strap for easy carrying Inverter Power Source for low energy demand and best arc performance Microprocessor controls real time welding parameters. Lift TIG DC ignition reduces Tungsten inclusions lower deformations Ideal for outdoor operations Technology Discovery 150TP 1x230Vac ± 15% @ 50-60Hz 16A MMA TIG - WIG 35% 60% 100% 35% 60% 100% 140A 110A 100A 150A 115A 100A 5A 140A 5A 150A 94V 23S 310 x 120 x 215mm Discovery 150TP 001.0013.0000 Electrode Holder 16mm 2 L= 4m 006.0002.0026 Earth Cable 16mm2 L=3m 006.0002.0010 Torch TIG 17 valve L= 4m 006.0005.0007 Suitcase 01 ABS BLACK 006.0002.0012 KIT MMA 006.0002.0001 Suggested composition: 006.0011.0007 Discovery 150TP + Suitcase 01 + KIT MMA 11_2015 8

Multipower 184 POWER FACTOR CORRECTOR 1 x 115Vac / 1 x 230Vac Multipower 184 is an advanced inverter Power Source characterized by robust and reliable industrial construction. It is recommended for MMA MMA/CELL and LIFT TIG DC applications providing excellent arc characteristics. Multipower 184 Total Protection age and makes the unit suitable for use with unstable power supply and motor generators. PFC (Power Factor Corrector) designed for voltage support from 90 Vac up to 270 Vac able to supply all the demanded current according to the needed welding conditions. Through such devices it is possible the using of this machine both with not stabilized motor-generator and with over 100 meters long power supply Lift Start function guarantees arc ignition without damaging the tungsten electrode. VRD (Volt Reduction Device for safety) DYNarc (Dynamic arc for deeper welding penetration) and V.EL (switch off Arc Voltage). the remote control RC 03. : MMA - MMA CELLULOSIC - TIG DC LIFT EN: EN 60974-1 - EN 60974-10 Technology Special Function Handle and Shoulder for easy carrying Inverter Power Sorce for low energy demand and best arc performances Microprocessor controls real time welding parameters. Lift TIG DC reduces Tungsten inclusions. Ideal for outdoor operations. Multipower 184 001.0029.0000 SLIDING KIT 7 010.0000.0051 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch TIG 26 valve L= 4m 006.0005.0002 RC03 Remote Control 1 potentiometer 006.0003.0120 Cable RC03 L=5m 6pins 022.0002.0166 Cable RC03 L=10m 6pins 022.0002.0167 Cable RC03 L=15m 6pins 022.0002.0168 Suitcase 03 ABS BLACK 006.0002.0039 Suggested composition: Multipower 184 + Electrode Holder 35mm2 L=4m + Earth Cable 35mm2 L=4m + Suitcase 03 Multipower 184 1x230Vac ± 15% @ 50-60Hz 1x115Vac ± 15% @ 50-60Hz 16A 32A MMA TIG - WIG MMA TIG - WIG 35% 60% 100% 35% 60% 100% 50% 60% 100% - - 100% 180A 130A 120A 180A 130A 120A 115A 110A 105A - - 115A 10A 180A 5A 180A 10A 115A 5A 115A 83V - 11V 23S 400 x 160 x 260 mm 11_2015 9

Discovery 200S 3 x 400Vac Discovery 200S is a compact and portable 3 Phase inverter power source for MMA and TIG DC welding applications with excellent arc characteristics in both processes. Discovery 200S repair. The inner PFC W.ECO (Power Factor Corrector)es harmonic current emissions according to the CE regulations. TIG DC functions and digital control available is an optimized medium metal structures. - ing. Anti Sticking allows electrode unstick from the base material in case of accidental sticking. Most of market-electrodes up to 5mm diameter can be easily welded. - input and lower deformations. : MMA - TIG DC LIFT EN: EN 60974-1 - EN 60974-10 Technology Light weight and reliable Handle and Shoulder Strap for easy carrying Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Microprocessor controls real-time welding parameters Hot Start increases the start-current and gives better arc ignition Arc Force avoids short circuits and lack of fusion during the welding Lift TIG DC ignition reduces Tungsten inclusions Remote Control applicable Discovery 200S 3x400Vac ± 15% @ 50-60Hz 16A MMA TIG - WIG 40% 60% 100% 40% 60% 100% 200A 170A 130A 200A 170A 130A 5A 200A 5A 200A 61V 23S 400 x 160 x 260mm Discovery 200S 001.0027.0000 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch TIG 26 valve L= 4m 006.0005.0002 RC03 Remote Control 1 potentiometer 006.0003.0120 Cable RC03 L=5m 6pins 022.0002.0166 Cable RC03 L=10m 6pins 022.0002.0167 Cable RC03 L=15m 6pins 022.0002.0168 Suitcase 03 ABS BLACK 006.0002.0039 Suggested composition: Discovery 200S + Electrode Holder 35mm2 L=4m + Earth Cable 35mm2 L=4m + Suitcase 03 11_2015 10

Discovery 250 3 x 400Vac Discovery 250 source for MMA welding and TIG DC applications with excellent arc characteristics. Discovery 250 - TIG DC functions and digital control available is an optimized medium metal structures. - ing. Anti Sticking allows electrode unstick from the base material in case of accidental sticking. Most of market-electrodes up to 6mm diameter can be easily welded. - input and lower deformations. : MMA - TIG DC LIFT EN: EN 60974-1 - EN 60974-10 Technologie Technology Robust construction for heavy duty use Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Digital display for setting and reading welding parameters Microprocessor controls real-time welding parameters Hot Start increases the start-current and gives better arc ignition Arc Force avoids short circuits and lack of fusion during the welding Lift TIG DC ignition reduces Tungsten inclusions Trolley available Remote Control applicable Discovery 250 3x400Vac ± 15% @ 50-60Hz 16A MMA TIG - WIG 35% 60% 100% 35% 60% 100% 250A 190A 160A 250A 200A 170A 5A 250A 5A 250A 77V 23S 460 x 230 x 325mm Discovery 250 001.0009.0000 Trolley 02 006.0002.0014 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch TIG 26 valve L= 4m 006.0005.0002 RC03 Remote Control 1 potentiometer 006.0003.0120 Cable RC03 L=5m 6pins 022.0002.0166 Cable RC03 L=10m 6pins 022.0002.0167 Cable RC03 L=15m 6pins 022.0002.0168 Suggested composition: Discovery 250 + Electrode Holder 35mm2 L=4m + Earth Cable 35mm2 L=4m 11_2015 11

Cruiser 402 : MMA - TIG DC LIFT - MMA CELLULOSIC - ARC AIR EN: EN 60974-1 - EN 60974-10 Technology 3 x 400Vac Cruiser 402 is an Heavy Duty professional 3 Phase inverter power source for MMA Welding and TIG DC applications with excellent arc characteristics. Electrodes up to 8mm diameter can be easily welded thanks to its 400A- 100% duty factor at 40 C. Cruiser 402 - Digital control and excellent welding with cellulosic electrodes is an optimized combination also for piping and Oil & Gas industry applications. Arc Air diameter carbon electrode. Hot Start and Arc Force welding. Anti Sticking allows electrode unstick from the base material in case of accidental sticking. Cruiser 402 can be easily upgraded to Cruiser 402 MIG/MAG - Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Microprocessor controls real-time welding parameters Digital display for setting and reading welding parameters Lift TIG DC Ignition reduces Tungsten inclusions Trolley available Remote Control applicable Special Function Cruiser 402 3x400Vac ± 15% @ 50-60Hz 32A MMA TIG - WIG 100% 100% 400A 400A 5A - 400A 5A - 400A 9/83V 9/83V 23 690x290x510mm 49.5Kg Cruiser 402 001.0103.0000 Trolley E 004.0000.0005 Trolley 02 006.0002.0014 Electrode Holder 70mm2 L=4m 006.0002.0025 Earth Cable 70mm2 L=4m 006.0002.0017 Torch TIG 26 valve L= 4m 006.0005.0002 RC03 Remote Control 1 potentiometer 006.0003.0120 Cable RC03 L=5m 6pins 022.0002.0166 Cable RC03 L=10m 6pins 022.0002.0167 Cable RC03 L=15m 6pins 022.0002.0168 Suggested composition: Cruiser 402 + Trolley E + Electrode Holder 70mm2 L=4m + Earth Cable 70mm2 L=4m 11_2015 12

Cruiser 502 : MMA - TIG DC LIFT - MMA CELLULOSIC - ARC AIR EN: EN 60974-1 - EN 60974-10 Technology 3 x 400Vac Cruiser 502 is an Heavy Duty professional 3 Phase inverter power source for MMA Welding and TIG DC applications with excellent arc characteristics. Electrodes up to 8mm diameter can be easily welded thanks to its 400A- 100% duty factor at 40 C. Cruiser 502 - Digital control and excellent welding with cellulosic electrodes is an optimized combination also for piping and Oil & Gas industry applications. Arc Air diameter carbon electrode. Hot Start and Arc Force welding. Anti Sticking allows electrode unstick from the base material in case of accidental sticking. Cruiser 402 can be easily upgraded to Cruiser 502 MIG/MAG - Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Microprocessor controls real-time welding parameters Digital display for setting and reading welding parameters Lift TIG DC Ignition reduces Tungsten inclusions Trolley available Remote Control applicable Special Function Cruiser 502 3x400Vac ± 15% @ 50-60Hz 32A MMA TIG - WIG 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 5A - 500A 5A - 500A 8/95V 8/85V 23 690 x 290 x 510mm 49.5Kg Cruiser 502 001.0104.0000 Trolley E 004.0000.0005 Trolley 02 006.0002.0014 Electrode Holder 70mm2 L=4m 006.0002.0025 Earth Cable 70mm2 L=4m 006.0002.0017 Torch TIG 26 valve L= 4m 006.0005.0002 RC03 Remote Control 1 potentiometer 006.0003.0120 Cable RC03 L=5m 6pins 022.0002.0166 Cable RC03 L=10m 6pins 022.0002.0167 Cable RC03 L=15m 6pins 022.0002.0168 Suggested composition: Cruiser 502 + Trolley E + Electrode Holder 70mm2 L=4m + Earth Cable 70mm2 L=4m 11_2015 13

Note... 11_2015 14

TIG DC 11_2015 15

Discovery 161T 1 x 230Vac Discovery 161T is an Advanced Inverter Power Source for TIG DC and MMA welding with excellent arc characteristics. Friendly-user digital interface allows precise parameters setting. Weco Special HF control provides100% rapid and precise arc ignition. The welding is here optimal thanks to: TIG PULS SYN (Synergic) The Q-Spot function- sheet deformation. It allows the positioning of the electrode on the exact tacking spot. - Sticking facilitate operations with up to 3.25mm diameter electrode. : TIG DC HF - MMA EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Light weight and reliable construction Handle and Shoulder Strap for easy carrying Microprocessor controls real time welding parameters Full Functions TIG DC setting with Digital Display Slow Pulse TIG DC for welding with TIG rod er deformations Technology Special Function Discovery 161 T 1x230Vac ± 15% @ 50-60Hz 16A TIG - WIG MMA 25% 60% 100% 30% 60% 100% 160A 120A 100A 150A 115A 100A 5A 160A 5A 150A 54V 23S 360 x 120 x 215mm Discovery 161T 001.0022.0000 OVERCUT BOX (Generator Protection) 006.0002.0040 Electrode Holder 16mm 2 L= 4m 006.0002.0026 Earth Cable 16mm2 L=3m 006.0002.0010 Torch TIG 17 L=4m AIR PT 006.0005.0001 Suitcase 02 ABS BLACK 006.0002.0016 KIT MMA 006.0002.0001 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 Suggested composition: Discovery 161T + Suitcase 02 + Earth Cable 16mm2 L=3m + Torch TIG 17 L=4m AIR PT + Gas regulator FLOWMETER 11_2015 16

Discovery 171T MAX : TIG DC HF - MMA EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology 1 x 230Vac Discovery 171T MAX is an innovative Inverter Power Source for TIG DC and MMA welding with excellent arc characteristics. Discovery 171T MAX Q-Start Tack-welding in any conditions. Heat imput and deformations are no longer barriers thanks to Multi-Tack system. It minimizes heat impact on welding material and guarantees high Synergic Pulse TIG DC SYN current. Weco Special HF control provides100% rapid and precise arc ignition. Friendly-user digital interface allows precise parameters setting. parameters control (Base Current and Duty Cycle) allow operating in slow pulse and fast pulse. Trigger control sets 2T/4T/Bi-Level and Spot Welding. Sticking facilitate operations with up to 3.25mm diameter electrode. Handle and Shoulder Strap for easy carrying Microprocessor controls real time welding parameters Slow Pulse TIG DC for thicker plate and welding with TIG rod lower deformations Remote Control applicable Special Function Discovery 171 T MAX 1x230Vac ± 15% @ 50-60Hz 16A TIG - WIG MMA 40% - 100% 50% - 100% 170A - 120A 150A - 120A 5A 170A 5A 150A 65V 23S 400 x 160 x 260 mm Discovery 171T MAX 001.0026.0000 OVERCUT BOX (Generator Protection) 006.0002.0040 Trolley 02 006.0002.0014 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch TIG 26 L=4m AIR PT 006.0005.0004 Torch TIG 26 L=4m AIR Potentiometer(*) 006.0005.0008 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Suitcase 03 ABS BLACK 006.0002.0039 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 (*) 022.0002.0069 Suggested composition: Discovery 171T MAX + Suitcase 03 + Torch TIG 26 L=4m AIR PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_2015 17

Multipower 204T POWER FACTOR CORRECTOR 1 x 115Vac / 1 x 230Vac : TIG DC HF - MMA - MMA CELLULOSIC EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Special Function Multipower 204 T 1x230Vac ± 15% @ 50-60Hz 1x115Vac ± 15% @ 50-60Hz 16A 32A TIG - WIG MMA TIG - WIG MMA 30% 60% 100% 35% 60% 100% 100% 50% 60% 100% 200A 140A 130A 180A 130A 120A 115A 115A 110A 105A 5A 200A 10A 180A 5A/10A 115A 83V - 11V 23S 400 x 160 x 260 Multipower 204 T is a high sophisticated single Phase Inverter TIG DC welding machine. In TIG DC mode this inverter generator can easily weld Multipower 204 T is particularly indicated for extremely precise construc- - Multipower 204 T PFC device (Power Factor Corrector) which is dimensioned fur supporting a voltage range from 90 Vac up to 270 Vac, there is besides an intelligent system inside able to apply - used both with not stabilized lines or motor generators and with over 100 meters long supplying cables. Weco Special HF control grants 100% a rapid and highly precise arc ignition. The welding is here optimal thanks to: TIG PULS SYN (Synergic) The Dynamic Arc (DYNarc) function which ensures an enhanced weld- The Q-Start function time for it at the beginning of the welding process. The Multi-Tack function welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function tion. It allows the positioning of the electrode on the exact tacking spot. Multipower 204 T allows setting of different coated electrodes types (CELLULOSIC machine can automatically optimize the processing parameters for each kind of base material. The DYNac function ensures a deeper penetration and more stable arc; - The V.EL function (Switch of arc Voltage MMA) allows to set up a switch from the base material. 50 programs can be loaded and saved in memory foot pedal or remote control unit Multipower 204T 001.0031.0000 Cooling Unit C.U.12 003.0000.0151 KIT C.U./204T 010.0000.0050 Trolley 02 006.0002.0014 SLIDING KIT 7 010.0000.0051 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch TIG 26 L=4m AIR PT 006.0005.0004 Torch TIG 26 L=4m AIR Potentiometer(*) 006.0005.0008 Torch TIG 26 L=4m AIR Up/Down 006.0005.0009 Torch TIG 18 L=4m H2O PT 006.0005.0006 Torch TIG 18 L=4m H2O Potentiometer(*) 006.0005.0003 Torch TIG 18 L=4m H2O Up/Down 006.0005.0010 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Suitcase 03 ABS BLACK 006.0002.0039 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 022.0002.0068 Suggested composition: Discovery 204T + Suitcase 03 + Torch TIG 26 L=4m AIR PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_2015 18

Discovery 220T POWER FACTOR CORRECTOR : TIG DC HF - MMA EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology 1 x 230Vac Discovery 220T is a high sophisticated single Phase Inverter TIG DC welding machine. In TIG DC mode this inverter generator can easily weld ordinary Discovery 220T is particularly indicated for extremely precise The inner PFC W.ECO (Power Factor Corrector) harmonic current emissions according to the CE regulations. In TIG DC it is possible the welding with a duty cycle of 220 A-40% at 16 A. Weco Special HF control grants 100% a rapid and highly precise arc ignition. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Special Function Discovery 220 T 1x230Vac ± 15% @ 50-60Hz 16A 25A TIG - WIG MMA 40% 60% 100% - 60% 100% 220A 180A 160A - 180A 150A 5A 220A 10A 180A 81V 23S 460 x 230 x 325mm Discovery 220T 001.0030.0000 Cooling Unit C.U.12 003.0000.0151 Trolley P 004.0000.0014 Trolley 02 006.0002.0014 SLIDING KIT 6 010.0000.0048 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch TIG 26 L=4m AIR PT 006.0005.0004 Torch TIG 26 L=4m AIR Potentiometer(*) 006.0005.0008 Torch TIG 26 L=4m AIR Up/Down 006.0005.0009 Torch TIG 18 L=4m H2O PT 006.0005.0006 Torch TIG 18 L=4m H2O Potentiometer(*) 006.0005.0003 Torch TIG 18 L=4m H2O Up/Down 006.0005.0010 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 022.0002.0068 Suggested composition: Discovery 220T + C.U. 12 + Trolley 02 + Torch TIG 18 L=4m H2O PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_2015 19

Discovery 300T : TIG DC HF - MMA EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Special Function Discovery 300 T 3x400Vac ± 15% @ 50-60Hz 20A TIG - WIG MMA 50% 60% 100% 40% 60% 100% 300A 250A 210A 300A 230A 200A 5A 300A 10A 300A 76V 23S 460 x 230 x 325mm Discovery 300T 001.0032.0000 Cooling Unit C.U.12 003.0000.0151 Trolley P 004.0000.0014 Trolley 02 006.0002.0014 SLIDING KIT 6 010.0000.0048 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch TIG 26 L=4m AIR PT 006.0005.0004 Torch TIG 26 L=4m AIR Potentiometer(*) 006.0005.0008 Torch TIG 26 L=4m AIR Up/Down 006.0005.0009 Torch TIG 18 L=4m H2O PT 006.0005.0006 Torch TIG 18 L=4m H2O Potentiometer(*) 006.0005.0003 Torch TIG 18 L=4m H2O Up/Down 006.0005.0010 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 022.0002.0068 3 x 400Vac Discovery 300 T is a high sophisticated Three Phases Inverter TIG DC welding machine. In TIG DC mode this inverter generator can easily weld ordinary Discovery 300T is particularly indicated for extremely precise In TIG DC it is possible the welding with a duty cycle of 300 A-50% / 40C Weco Special HF control grants 100% a rapid and highly precise arc ignition. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Suggested composition: Discovery 300T + C.U.12 + Trolley 02 + Torch TIG 18 L=4m H2O PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_2015 20

Cruiser 322T 3 x 400Vac Cruiser 322T is a high sophisticated Three Phases Inverter TIG DC welding machine. In TIG DC mode this inverter generator can easily weld ordinary Cruiser 322T is particularly indicated for extremely precise Weco Special HF control grants 100% a rapid and highly precise arc ignition. : TIG DC HF - MMA EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Special Function Cruiser 322 T 3x400Vac ± 15% @ 50-60Hz 25A TIG - WIG MMA 45% 60% 100% 50% 60% 100% 320A 280A 240A 300A 270A 240A 5A 320A 10A 300A 7/66V 7/71V 23 690 x 290 x 450mm Cruiser 322 T 001.0075.0000 Cooling Unit C.U.09 003.0000.0101 Trolley L 004.0000.0011 Electrode Holder 70mm2 L=4m 006.0002.0025 Earth Cable 70mm2 L=4m 006.0002.0017 Torch TIG 18 L=4m H2O PT 006.0005.0006 Torch TIG 18 L=4m H2O Potentiometer(*) 006.0005.0003 Torch TIG 18 L=4m H2O Up/Down 006.0005.0010 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 022.0002.0068 Suggested composition: Cruiser 322T + C.U.09 + Trolley L 11_2015 21

Cruiser 402T 3 x 400Vac Cruiser 402T is a high sophisticated Three Phases Inverter TIG DC welding machine. In TIG DC mode this inverter generator can easily weld ordinary Cruiser 402T is particularly indicated for extremely precise Weco Special HF control grants 100% a rapid and highly precise arc ignition. : TIG DC HF - MMA - ARC AIR EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Special Function CRUISER 402 T 3x400Vac ± 15% @ 50-60Hz 32A TIG - WIG MMA 100% 100% 400A 400A 5A 400A 10A 400A 9/83V 9/83V 23 690 x 290 x 450mm Cruiser 402 T 001.0105.0000 Cooling Unit C.U.09 003.0000.0101 Trolley L 004.0000.0011 Electrode Holder 70mm2 L=4m 006.0002.0025 Earth Cable 70mm2 L=4m 006.0002.0017 Torch TIG 18 L=4m H2O PT 006.0005.0006 Torch TIG 18 L=4m H2O Potentiometer(*) 006.0005.0003 Torch TIG 18 L=4m H2O Up/Down 006.0005.0010 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 022.0002.0068 Suggested composition: Cruiser 402T + C.U.09 + Trolley L 11_2015 22

Cruiser 502T 3 x 400Vac Cruiser 502T is a high sophisticated Three Phases Inverter TIG DC welding machine. In TIG DC mode this inverter generator can easily weld ordinary Cruiser 502T is particularly indicated for extremely precise Weco Special HF control grants 100% a rapid and highly precise arc ignition. : TIG DC HF - MMA - ARC AIR EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Special Function CRUISER 502 T 3x400Vac ± 15% @ 50-60Hz 32A TIG - WIG MMA 50% 60% 100% 50% 60% 100% 500A 460A 400A 500A 450A 400A 5A 500A 10A 500A 9/83V 9/83V 23 690 x 290 x 450mm Cruiser 502 T 001.0106.0000 Cooling Unit C.U.09 003.0000.0101 Trolley L 004.0000.0011 Electrode Holder 70mm2 L=4m 006.0002.0025 Earth Cable 70mm2 L=4m 006.0002.0017 Torch TIG 18 L=4m H2O PT 006.0005.0006 Torch TIG 18 L=4m H2O Potentiometer(*) 006.0005.0003 Torch TIG 18 L=4m H2O Up/Down 006.0005.0010 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 022.0002.0068 Suggested composition: Cruiser 502T + C.U.09 + Trolley L 11_2015 23

Note... 11_2015 24

TIG AC/DC 11_2015 25

Discovery 200AC/DC 1 x 230Vac Discovery 200 AC/DC is a complete and reliable Single Phase Inverter Power Source for TIG AC and DC welding. easily welded in TIG DC. age Industry and Shipyards are Discovery 200 AC/DC main applications. Trigger control sets 2T/4T/Bi-Level. able in TIG DC. Weco Special HF control provides100% rapid and precise arc ignition. TIG AC welding is optimized thanks to: Synergic arc ignition Advanced Soft AC-Square Waveform for outstanding weld- noise reduction. Friendly-user digital interface allows precise parameters setting. Up to 3.25mm diameter electrode welding is possible in MMA. : TIG AC/DC HF - MMA EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Light weight and reliable construction Microprocessor controls real time welding parameters AC Balance for oxide-cleaning and penetration and penetration Remote Controlled and Cooling Unit applicable Discovery 200 AC/DC 1x230Vac ± 15% @ 50-60Hz 16A TIG - WIG MMA 30% 60% 100% 40% 60% 100% 200A 150A 130A 150A 130A 120A 7A 200A 7A 150A 88V 23S 460 x 230 x 325mm Discovery 200 AC/DC 001.0154.0000 Cooling Unit C.U.12 003.0000.0151 Trolley P 004.0000.0014 Trolley 02 006.0002.0014 SLIDING KIT 6 010.0000.0048 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch TIG 26 L=4m AIR PT 006.0005.0004 Torch TIG 26 L=4m AIR Potentiometer(*) 006.0005.0008 Torch TIG 18 L=4m H2O PT 006.0005.0006 Torch TIG 18 L=4m H2O Potentiometer(*) 006.0005.0003 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 022.0002.0068 Suggested composition: Discovery 200AC/DC + C.U. 12 + Trolley 02 + Torch TIG 18 L=4m H2O PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_2015 26

Discovery 221AC/DC POWER FACTOR CORRECTOR 1 x 230Vac Discovery 221 AC/DC is a high sophisticated single Phase Inverter TIG AC/DC portable welding machine. steel and copper. Discovery 221AC/DC welding performance. The inner PFC W.ECO device (Power Factor Corrector) reduces harmonic current emissions according to the CE regulations. Weco Special HF control grants 100% a rapid and highly precise arc ignition. The AC welding is here optimized thanks to: the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it possible to create a highly penetrative and tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC reduce the deformation on the base material. : TIG AC/DC HF - MMA EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Special Function Discovery 221 AC/DC 1x230Vac ± 15% @ 50-60Hz 16A 25A TIG - WIG MMA 35% 60% 100% 40% 60% 100% 220A 180A 160A 180A 150A 120A 5A 220A 10A 180A 23S 460 x 230 x 325mm The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an enhanced welding at any welding conditions. The Q-Start function at the beginning of the welding process. The Multi-Tack function process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory or remote control unit Discovery 221 AC/DC 001.0158.0000 Cooling Unit C.U.12 003.0000.0151 Trolley P 004.0000.0014 Trolley 02 006.0002.0014 SLIDING KIT 6 010.0000.0048 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch TIG 26 L=4m AIR PT 006.0005.0004 Torch TIG 26 L=4m AIR Potentiometer(*) 006.0005.0008 Torch TIG 26 L=4m AIR Up/Down 006.0005.0009 Torch TIG 18 L=4m H2O PT 006.0005.0006 Torch TIG 18 L=4m H2O Potentiometer(*) 006.0005.0003 Torch TIG 18 L=4m H2O Up/Down 006.0005.0010 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 022.0002.0068 Suggested composition: Discovery 221AC/DC + C.U. 12 + Trolley 02 + Torch TIG 18 L=4m H2O PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_2015 27

Discovery 300AC/DC 3 x 400Vac : TIG AC/DC HF - MMA EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Special Function Discovery 300 AC/DC 3x400Vac ± 15% @ 50-60Hz 20A TIG - WIG MMA 30% 60% 100% 30% 60% 100% 300A 220A 180A 300A 220A 180A 5A 300A 10A 300A 9/59V 23S 460 x 230 x 325mm Discovery 300 AC/DC is a high sophisticated three Phase Inverter TIG AC/DC portable welding machine. Discovery 300AC/DC is particularly in- Weco Special HF control grants 100% a rapid and highly precise arc ignition. The AC welding is here optimized thanks to: calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it possible to create a high- be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC in order to reduce the deformation on the base material. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an enhanced weld- The Q-Start function time for it at the beginning of the welding process. The Multi-Tack function welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function tion. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory or remote control unit Discovery 300 AC/DC 001.0126.0000 Cooling Unit C.U.12 003.0000.0151 Trolley P 004.0000.0014 Trolley 02 006.0002.0014 SLIDING KIT 6 010.0000.0048 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch TIG 26 L=4m AIR PT 006.0005.0004 Torch TIG 26 L=4m AIR Potentiometer(*) 006.0005.0008 Torch TIG 26 L=4m AIR Up/Down 006.0005.0009 Torch TIG 18 L=4m H2O PT 006.0005.0006 Torch TIG 18 L=4m H2O Potentiometer(*) 006.0005.0003 Torch TIG 18 L=4m H2O Up/Down 006.0005.0010 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 022.0002.0068 Suggested composition: Discovery 300AC/DC + C.U. 12 + Trolley 02 + Torch TIG 18 L=4m H2O PT + Earth Cable 35mm2 L=4m + Gas regulator FLOWMETER 11_2015 28

Cruiser 322AC/DC : TIG AC/DC HF - MMA EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Special Function 3 x 400Vac Cruiser 322AC/DC is an advanced technology Three Phase Inverter Power Source for TIG AC and DC welding. easily welded in TIG DC. age industry and shipyards are Cruiser 322AC/DC main applications. Weco Special HF control provides100% rapid and precise arc ignition. The AC welding is here optimized thanks to: the calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it that very light gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC obtaining high welding speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC welding is besides useful when welding for The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Cruiser 322 AC/DC 3x400Vac ± 15% @ 50-60Hz 25A TIG - WIG MMA 45% 60% 100% 50% 60% 100% 320A 280A 240A 300A 270A 240A 5A 320A 10A 300A 7/66V 7/71V 23 690 x 290 x 450mm Cruiser 322 AC/DC 001.0076.0000 Cooling Unit C.U.09 003.0000.0101 Trolley L 004.0000.0011 Electrode Holder 70mm2 L=4m 006.0002.0025 Earth Cable 70mm2 L=4m 006.0002.0017 Torch TIG 18 L=4m H2O PT 006.0005.0006 Torch TIG 18 L=4m H2O Potentiometer(*) 006.0005.0003 Torch TIG 18 L=4m H2O Up/Down 006.0005.0010 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 022.0002.0068 Suggested composition: Cruiser 322T + C.U.09 + Trolley L 11_2015 29

Cruiser 402AC/DC : TIG AC/DC HF - MMA - ARC AIR EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Special Function CRUISER 402 AC/DC 3x400Vac ± 15% @ 50-60Hz 32A TIG - WIG MMA %40 C 50% 60% 100% 50% 60% 100% 400A 380A 340A 400A 370A 340A %RT 100% 100% 400A 400A 5A 400A 10A 400A 9/81V 9/81V 23 690 x 290 x 450mm 55.5kg Cruiser 402AC/DC 001.0123.0000 Cooling Unit C.U.09 003.0000.0101 Trolley L 004.0000.0011 Electrode Holder 70mm2 L=4m 006.0002.0025 Earth Cable 70mm2 L=4m 006.0002.0017 Torch TIG 18 L=4m H2O PT 006.0005.0006 Torch TIG 18 L=4m H2O Potentiometer(*) 006.0005.0003 Torch TIG 18 L=4m H2O Up/Down 006.0005.0010 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 022.0002.0068 Suggested composition: Cruiser 402AC/DC + C.U.09 + Trolley L 3 x 400Vac Cruiser 402AC/DC is an advanced technology Three Phase Inverter Power Source for TIG AC and DC welding. easily welded in TIG DC. age industry and shipyards are Cruiser 402AC/DC main applications. Weco Special HF control provides100% rapid and precise arc ignition. The AC welding is here optimized thanks to: the calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it that very light gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC obtaining high welding speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC welding is besides useful when welding for The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory 11_2015 30

Cruiser 502AC/DC : TIG AC/DC HF - MMA - ARC AIR EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Special Function CRUISER 502AC/DC 3x400Vac ± 15% @ 50-60Hz 32A TIG - WIG MMA %40 C 30% 60% 100% 30% 60% 100% 500A 380A 340A 500A 370A 340A %RT 50% 60% 100% 50% 60% 100% 500A 470A 400A 500A 460A 400A 5A 500A 5A 500A 9/81V 9/81V 23 690 x 290 x 450mm 3 x 400Vac Cruiser 502AC/DC is an advanced technology Three Phase Inverter Power Source for TIG AC and DC welding. easily welded in TIG DC. age industry and shipyards are Cruiser 502AC/DC main applications. Weco Special HF control provides100% rapid and precise arc ignition. The AC welding is here optimized thanks to: the calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it that very light gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC obtaining high welding speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC welding is besides useful when welding for The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. 50 programs can be loaded and saved in memory Cruiser 502AC/DC 001.0115.0000 Cooling Unit C.U.09 003.0000.0101 Trolley L 004.0000.0011 Electrode Holder 70mm2 L=4m 006.0002.0025 Earth Cable 70mm2 L=4m 006.0002.0017 Torch TIG 18 L=4m H2O PT 006.0005.0006 Torch TIG 18 L=4m H2O Potentiometer(*) 006.0005.0003 Torch TIG 18 L=4m H2O Up/Down 006.0005.0010 RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 022.0002.0068 Suggested composition: Cruiser 502AC/DC + C.U.09 + Trolley L 11_2015 31

Note... 11_2015 32

MIG MAG Synergic 11_2015 33

Pioneer 321MKS For 200mm - 300mm Spools 3 x 400Vac Pioneer 321 MKS is a powerful synergic 3 Phase Inverter for welding. Pioneer 321 MKS easy to move on the working site. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Friendly-user interface allows precise parameters setting using only one knob. 3T Special included for perfect arc ignition and optimum wire cutting at the end of welding. curves and memory locations for customized welding parameters assure complete welding process repeatability. WECO unique HAC (Hybrid Arc Control) supplies a soft and and minimal spattering in any working conditions. : MIG/MAG Synergic Cooling Unit available Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Push-Pull Gun applicable for better MIG aluminum welding EN: EN 60974-1 - EN 60974-5 - EN 60974-10 Technology Pioneer 321 MKS 001.0071.0000 Cooling Unit C.U.07B 003.0000.0121 Torch MIG 36 L= 4m AIR EURO 006.0008.0004 MOTOR DRIVE Torch MIG 240 L= 4m H2O EURO 006.0008.0007 24VDC Earth Cable 35mm2 L=4m 006.0002.0003 35W RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 d D N 4 D=30mm - d=14mm RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321MKS WF105/107 010.0000.0040 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 ROLL 0.6/0.8 D=30 d=14 V 002.0000.0119 Pioneer 321 MKS ROLL 0.8/1.0 D=30 d=14 V 002.0000.0120 3x400Vac ± 15% @ 50-60Hz ROLL 1.0/1.2 D=30 d=14 V 002.0000.0121 16A ROLL 0.8/1.0 D=30 d=14 U 002.0000.0122 MIG/MAG ROLL 1.0/1.2 D=30 d=14 U 002.0000.0123 45% 60% 100% ROLL 1.0/1.2 D=30 d=14 VK 002.0000.0124 320A 280A 230A 30A - 320A Suggested composition AIR: 50V Pioneer 321MKS + Torch MIG 36 L= 4m AIR EURO + 11.6kVA - 11.1KW Earth Cable 35mm2 L=4m + Gas regulator MANOMETER 23 Suggested composition H2O: 1110 x 550 x 805mm Pioneer 321MKS + C.U.07B + Torch MIG 240 L= 4m H2O + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER 11_2015 34

Pioneer 401MKS For 200mm - 300mm Spools 3 x 400Vac Pioneer 401 MKS is a powerful synergic 3 Phase Inverter for welding. Pioneer 401 MKS easy to move on the working site. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Friendly-user interface allows precise parameters setting using only one knob. 3T Special included for perfect arc ignition and optimum wire cutting at the end of welding. curves and memory locations for customized welding parameters assure complete welding process repeatability. WECO unique HAC (Hybrid Arc Control) supplies a soft and and minimal spattering in any working conditions. : MIG/MAG Synergic EN: EN 60974-1 - EN 60974-5 - EN 60974-10 d D Technology MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Pioneer 401 MKS 3x400Vac ± 15% @ 50-60Hz 16A MIG/MAG 50% 60% 100% 400A 360A 320A 20A - 400A 53V 23 1110 x 550 x 805mm Cooling Unit available Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Push-Pull Gun applicable for better MIG aluminum welding Pioneer 401 MKS 001.0073.0000 Cooling Unit C.U.07B 003.0000.0121 Torch MIG 36 L= 4m AIR EURO 006.0008.0004 Torch MIG MB 501D L= 4m H2O EURO 006.0008.0006 Earth Cable 70mm2 L=4m 006.0002.0017 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321MKS WF105/107 010.0000.0040 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 ROLL 0.6/0.8 D=37 d=19 V 002.0000.0140 ROLL 0.8/1.0 D=37 d=19 V 002.0000.0141 ROLL 1.0/1.2 D=37 d=19 V 002.0000.0142 ROLL 1.2/1.6 D=37 d=19 V 002.0000.0143 ROLL 0.8/1.0 D=37 d=19 U 002.0000.0144 ROLL 1.0/1.2 D=37 d=19 U 002.0000.0145 ROLL 1.2/1.6 D=37 d=19 U 002.0000.0146 ROLL 1.0/1.2 D=37 d=19 VK 002.0000.0149 ROLL 1.2/1.6 D=37 d=19 VK 002.0000.0150 Suggested composition AIR: Pioneer 401MKS + Torch MIG 36 L= 4m AIR EURO + Earth Cable 70mm2 L=4m + Gas regulator MANOMETER Suggested composition H2O: Pioneer 401MKS + C.U.07B + Torch MIG MB 501D L= 4m H2O EURO + Earth Cable 70mm2 L=4m + Gas regulator MANOMETER 11_2015 35

Pioneer 321MSR For 200mm - 300mm Spools 3 x 400Vac Pioneer 321 MSR is a synergic 3 Phase Inverter with separated wire-feeder. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. WF 107 is a portable 4-roll drive wire feeder designed to withstand Friendly-user interface allows precise parameters setting using only one knob. - 3T Special Spot and Intermittent welding mode give excellent welding spots. curves and memory locations for customized welding parameters assure complete welding process repeatability. WECO unique HAC (Hybrid Arc Control) supplies a soft and and minimal spattering in any working conditions. : MIG/MAG Synergic EN: EN 60974-1 - EN 60974-10 Technology Cooling Unit available Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Up to 50m cable bundle can be used with no performances reduction Push-Pull Gun applicable for better MIG aluminum welding All settings can be found on the WF-107 front panel. Solid metallic 4 rolls motor drive-system and optical encoder give the better wire feeding with any type of wire. Pioneer 321 MSR 3x400Vac ± 15% @ 50-60Hz 16A MIG/MAG 45% 60% 100% 320A 280A 230A 30A - 320A 50V 11.6kVA - 11.1KW 23 1110 x 550 x 925mm Thanks to the inverter technology and software you can use cable bundles up to 50 meters without affecting the welding performance. ble bundle. 11_2015 36

Wire Feeder WF107 For 200mm - 300mm Spools EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Pioneer 321 MSR 001.0072.0000 Wire Feeder WF107 001.0323.0000 Wheels Kit WF 010.0000.0012 002.0001.0241 002.0001.0242 002.0001.0243 Cooling Unit C.U.07B 003.0000.0121 002.0001.0251 Interconnection cable 70mmq L=4mt H2O 002.0001.0252 002.0001.0253 Torch MIG 36 L= 4m AIR EURO 006.0008.0004 Torch MIG 240 L= 4m H2O EURO 006.0008.0007 Earth Cable 35mm2 L=4m 006.0002.0003 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321MKS WF105/107 010.0000.0040 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 ROLL 0.6/0.8 D=37 d=19 V 002.0000.0140 ROLL 0.8/1.0 D=37 d=19 V 002.0000.0141 ROLL 1.0/1.2 D=37 d=19 V 002.0000.0142 ROLL 1.2/1.6 D=37 d=19 V 002.0000.0143 ROLL 0.8/1.0 D=37 d=19 U 002.0000.0144 ROLL 1.0/1.2 D=37 d=19 U 002.0000.0145 ROLL 1.2/1.6 D=37 d=19 U 002.0000.0146 ROLL 1.0/1.2 D=37 d=19 VK 002.0000.0149 ROLLO 1.2/1.6 D=37 d=19 VK 002.0000.0150 Suggested composition AIR: Pioneer 321MSR + WF107 + Wheels Kit WF + Interconnection cable L=4mt AIR + Torch MIG 36 L= 4m AIR EURO + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER Suggested composition H2O: Pioneer 321MSR + C.U.07B + WF107 + Wheels Kit WF + Interconnection cable L=4mt H2O + Torch MIG 240 L= 4m H2O + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER 11_2015 37

Pioneer 401MSR For 200mm - 300mm Spools 3 x 400Vac Pioneer 401 MSR is a synergic 3 Phase Inverter with separated wire-feeder. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. WF 107 is a portable 4-roll drive wire feeder designed to withstand Friendly-user interface allows precise parameters setting using only one knob. - 3T Special Spot and Intermittent welding mode give excellent welding spots. curves and memory locations for customized welding parameters assure complete welding process repeatability. WECO unique HAC (Hybrid Arc Control) supplies a soft and and minimal spattering in any working conditions. : MIG/MAG Synergic EN: EN 60974-1 - EN 60974-10 Technology Cooling Unit available Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Up to 50m cable bundle can be used with no performances reduction Push-Pull Gun applicable for better MIG aluminum welding All settings can be found on the WF-107 front panel. Solid metallic 4 rolls motor drive-system and optical encoder give the better wire feeding with any type of wire. Pioneer 401 MSR 3x400Vac ± 15% @ 50-60Hz 16A MIG/MAG 50% 60% 100% 400A 360A 320A 20A - 400A 53V 23 1110 x 550 x 925mm Thanks to the inverter technology and software you can use cable bundles up to 50 meters without affecting the welding performance. ble bundle. 11_2015 38

Wire Feeder WF107 For 200mm - 300mm Spools EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Pioneer 401 MSR 001.0074.0000 Wire Feeder WF107 001.0323.0000 Wheels Kit WF 010.0000.0012 002.0001.0241 002.0001.0242 002.0001.0243 Cooling Unit C.U.07B 003.0000.0121 Interconnection cable 002.0001.0251 Interconnection cable 70mmq L=4mt H2O 002.0001.0252 Interconnection cable 002.0001.0253 Torch MIG 36 L= 4m AIR EURO 006.0008.0004 Torch MIG MB 501D L= 4m H2O EURO 006.0008.0006 Earth Cable 70mm2 L=4m 006.0002.0017 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321MKS WF105/107 010.0000.0040 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 ROLL 0.6/0.8 D=37 d=19 V 002.0000.0140 ROLL 0.8/1.0 D=37 d=19 V 002.0000.0141 ROLL 1.0/1.2 D=37 d=19 V 002.0000.0142 ROLL 1.2/1.6 D=37 d=19 V 002.0000.0143 ROLL 0.8/1.0 D=37 d=19 U 002.0000.0144 ROLL 1.0/1.2 D=37 d=19 U 002.0000.0145 ROLL 1.2/1.6 D=37 d=19 U 002.0000.0146 ROLL 1.0/1.2 D=37 d=19 VK 002.0000.0149 ROLL 1.2/1.6 D=37 d=19 VK 002.0000.0150 Suggested composition AIR: Pioneer 401MSR + WF107 + Wheels Kit WF + Interconnection cable L=4mt AIR + Torch MIG 36 L= 4m AIR EURO + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER Suggested composition H2O: Pioneer 401MSR + C.U.07B + WF107 + Wheels Kit WF + Interconnection cable L=4mt H2O + Torch MIG 240 L= 4m H2O + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER 11_2015 39

Note... 11_2015 40

MULTIFUNCTION 11_2015 41

DISCOVERY 161MF (TP) For 200mm Spools 1 x 230Vac Discovery 161 MF is a compact and portable Single Phase In- welding. only 17,6kg (including a spool of 5kg 200mm diameter) Discovery 161 MF offers excellent mig-brazing characteristics using CuSi3 and CuSi6. Polarity change allows welding with self shielded wires. Innovative WECO unique HAC (Hybrid Arc Control) supplies a ity and minimal spattering in any working conditions. Friendly-user interface allows precise parameters setting using only two knobs. optimizes the arc. Built-in Wind Tunnel protects electronic devices from dust and Discovery 161 MF life cycle. Light weight and reliable Lift TIG DC ignition reduces Tungsten inclusions Optional Spool Gun torch available for MIG aluminum welding : MIG/MAG Manual - TIG DC LIFT - MMA EN: EN 60974-1 - EN 60974-5 - EN 60974-10 Technology d D MOTOR DRIVE 24VDC 25W N 2 D=40mm - d=22mm Discovery 161 MF 1x230Vac ± 15% @ 50-60Hz 16A MIG - MAG TIG - WIG MMA 30% 60% 100% 40% 60% 100% 35% 60% 100% 160A 120A 100A 140A 130A 110A 140A 120A 100A 5A - 160A 5A - 140A 5A - 140A 91V 23S 460 x 230 x 325mm Discovery 161MF 001.0052.0000 Discovery 161MF TP (Total Protection) 001.0053.0000 Trolley 02 006.0002.0014 OVERCUT BOX (Generator Protection) 006.0002.0040 Electrode Holder 16mm 2 L= 4m 006.0002.0026 Earth Cable 16mm2 L=3m 006.0002.0010 Torch MIG 15 L= 3m AIR EURO 006.0008.0002 Torch MIG SPOOL GUN PLUS 15 L=6m EURO 006.0008.0005 Torch TIG 17 L= 4m AIR EURO 006.0005.0005 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 ROLL 0.6/0.8 D=40 d=22 V 002.0000.0106 ROLL 0.8/1.0 D=40 d=22 V 002.0000.0109 ROLL 1.0/1.2 D=40 d=22 V 002.0000.0107 ROLL 0.8/1.0 D=40 d=22 U 002.0000.0111 ROLL 1.0/1.2 D=40 d=22 U 002.0000.0112 ROLL 1.0/1.2 D=40 d=22 VK 002.0000.0114 Suggested composition Discovery 161MF: Discovery 161MF + Torch MIG 15 L= 3m AIR + Earth Cable 16mm2 L=4m + Gas regulator MANOMETER Suggested composition Discovery 161MF TP: Discovery 161MF TP + Torch MIG 15 L= 3m AIR + Earth Cable 16mm2 L=4m + Gas regulator MANOMETER 11_2015 42

MicroMAG 301 PLUS For 200mm Spools 3 x 400Vac MicroMAG 301 PLUS only 24kg (including a spool of 5kg 200mm diameter) Polarity change allows welding with self shielded wires. Innovative WECO unique HAC (Hybrid Arc Control) supplies a ity and minimal spattering in any working conditions. Friendly-user interface allows precise parameters setting using only two knobs. Soft Arc parameter optimizes the current and the arc based on the welding material. Post Gas are included for perfect arc ignition and optimum wire cutting at the end of welding. optimizes the arc. Built-in Wind Tunnel protects electronic devices from dust and A perfect wire feeding is guaranteed thanks to a 4-rolls motor drive included in MicroMAG 301 PLUS. : MIG/MAG Manual - TIG DC LIFT - MMA Up to 5mm electrodes in MMA Lift TIG ignition to reduce Tungsten inclusions. EN: EN 60974-1 - EN 60974-5 - EN 60974-10 Technology d D MOTOR DRIVE 24VDC 35W N 4 D=30mm - d=14mm MicroMag 301 PLUS 3x400Vac ± 15% @ 50-60Hz 16A MIG - MAG TIG - WIG MMA 35% 60% 100% 50% 60% 100% 40% 60% 100% 300A 230A 200A 250A 240A 210A 250A 220A 190A 5A - 300A 5A - 250A 5A - 250A 53V 23S 410 x 270 x 355mm MicroMag 301 PLUS 001.0065.0000 SLIDING KIT 2 MicroMAG 301 010.0000.0017 SLIDING KIT 3 MicroMAG 301 (DOUBLE) 010.0000.0018 Trolley 02 006.0002.0014 Trolley H 004.0000.0008 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch MIG 36 L= 4m AIR EURO 006.0008.0004 Torch TIG 26 L= 4m AIR EURO 006.0005.0011 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 ROLL 0.6/0.8 D=30 d=14 V 002.0000.0119 ROLL 0.8/1.0 D=30 d=14 V 002.0000.0120 ROLL 1.0/1.2 D=30 d=14 V 002.0000.0121 ROLL 0.8/1.0 D=30 d=14 U 002.0000.0122 ROLL 1.0/1.2 D=30 d=14 U 002.0000.0123 ROLL 1.0/1.2 D=30 d=14 VK 002.0000.0124 Suggested composition: MicroMag 301 PLUS + Torch MIG 36 L= 4m AIR + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER 11_2015 43

MicroMAG 302 MFK For 200mm - 300mm Spools 3 x 400Vac MicroMAG 302 MFK only 22kg - Polarity change allows welding with self shielded wires. Innovative WECO unique HAC (Hybrid Arc Control) supplies a ity and minimal spattering in any working conditions. Post Gas are included for perfect arc ignition and optimum wire cutting at the end of welding. curves and memory locations for customized welding parameters assure complete welding process repeatability. optimizes the arc. A perfect wire feeding is guaranteed thanks to a 4-rolls motor drive included in MicroMAG 302 MFK. : MIG/MAG Synergic - TIG DC LIFT- MMA EN: EN 60974-1 - EN 60974-5 - EN 60974-10 Technology Up to 5mm electrodes in MMA Lift TIG ignition to reduce Tungsten inclusions. Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Push-Pull torch applicable for MIG aluminum welding 15kg spool 300mm diameter Remote Controlled by MIG-torch( UP-DOWN) and RC unit d D MOTOR DRIVE 24VDC 35W N 4 D=30mm - d=14mm MicroMag 302 MFK 3x400Vac ± 15% @ 50-60Hz 16A MIG-MAG TIG - WIG MMA % 40 C 35% 60% 100% 50% 60% 100% 40% 60% 100% 300A 230A 200A 250A 240A 210A 250A 220A 190A % RT - 60% 100% - - 100% - - 100% - 300A 250A - - 250A - - 250A 5A - 300A 5A - 250A 5A - 250A 11-60V 23S 560 x 280 x 390mm 11_2015 44

MicroMAG 302 MFK + C.U.11 MicroMag 302 MFK 001.0069.0000 Cooling Unit C.U.11 003.0000.0131 Trolley 03 006.0002.0042 SLIDING KIT 5 MicroMAG 302 010.0000.0045 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch MIG 36 L= 4m AIR EURO 006.0008.0004 Torch TIG 26 L= 4m AIR EURO 006.0005.0011 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321MKS WF105/107 010.0000.0040 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 ROLL 0.6/0.8 D=30 d=14 V 002.0000.0119 ROLL 0.8/1.0 D=30 d=14 V 002.0000.0120 ROLL 1.0/1.2 D=30 d=14 V 002.0000.0121 ROLL 0.8/1.0 D=30 d=14 U 002.0000.0122 ROLL 1.0/1.2 D=30 d=14 U 002.0000.0123 ROLL 1.0/1.2 D=30 d=14 VK 002.0000.0124 Suggested composition: MicroMag 302 MFK + Torch MIG 36 L= 4m AIR + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER MicroMAG 302 MFK + C.U.11 + TROLLEY 03 11_2015 45

Cruiser 402-502 Synergic Version H2O : MIG/MAG Synergic - TIG DC LIFT - MMA - MMA CELLULOSIC - ARC AIR EN: EN 60974-1 - EN 60974-10 Technology 3 x 400Vac Cruiser 402/502 Synergic is a professional synergic 3 Phase Inverter Power Source (400A 100% at 40 C) with separated wire feeder for MIG-MAG welding. MMA, MMA cellulosic, Lift TIG DC and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Cruiser 402/502 Synergic power source can be easily moved WF 103 shipyard applications. WF 105 wire feeder is ideal for any kind of tomotive. welding parameters assure complete welding process repeatability. Innovative WECO unique HAC (Hybrid Arc Control) supplies a soft and very stable MIG-MAG arc with excellent weld - Gas are included for perfect arc ignition and optimum wire cutting at the end of welding. Modular concept allows easy welding system upgrade Up to 8mm diameter electrode welding is possible in MMA Arc Air gouging and cutting up to 6mm electrode Lift TIG DC ignition reduces Tungsten inclusions Cooling Unit available Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Push-Pull torch applicable for MIG aluminum welding Version AIR Special Function VP01 Cruiser 402 Synergic 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9-83V 23 1160 x 670 x 1530mm Cruiser 502 Synergic 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9-83V 23 1160 x 670 x 1530mm 11_2015 46

Wire Feeder WF103 - WF105 For 200mm - 300mm Spools WF103 EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d WF105 d D D MOTOR DRIVE 42VDC 120W N 4 D=30mm - d=22mm EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Cruiser 402 001.0103.0000 Cruiser 502 001.0104.0000 Wire Feeder WF103 001.0317.0000 Wire Feeder WF105 001.0319.0000 Wheels Kit WF 010.0000.0012 002.0001.0241 002.0001.0242 002.0001.0243 Cooling Unit C.U.09 003.0000.0101 Interconnection cable 002.0001.0251 Interconnection cable 70mmq L=4mt H2O 002.0001.0252 Interconnection cable 002.0001.0253 Torch MIG MB 501D L= 4m H2O 006.0008.0006 Trolley M 004.0000.0012 Tool BOX VP-01 (AIR VERSION) 004.0000.0201 Earth Cable 70mm2 L=4m 006.0002.0017 Electrode Holder 70mm2 L=4m 006.0002.0025 Torch TIG 26 valve L= 4m 006.0005.0002 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321MKS WF105/107 010.0000.0040 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 KIT CRUISER 402 AIR WF103: Cruiser 402 + WF103 + Wheels Kit WF + Trolley M + VP-01 + KIT CRUISER 402 AIR WF105: Cruiser 402 + WF105 + Wheels Kit WF + Trolley M + VP-01 + KIT CRUISER 402 H2O WF103: Cruiser 402 + C.U.09 + WF103 + Wheels Kit WF + Trolley M + Interconnection cable KIT CRUISER 402 H2O WF105: Cruiser 402 + C.U.09 + WF105 + Wheels Kit WF + Trolley M + Interconnection cable KIT CRUISER 502 AIR WF103: Cruiser 502 + WF103 + Wheels Kit WF + Trolley M + VP-01 + KIT CRUISER 502 AIR WF105: Cruiser 502 + WF105 + Wheels Kit WF + Trolley M + VP-01 + KIT CRUISER 502 H2O WF103: Cruiser 502 + C.U.09 + WF103 + Wheels Kit WF + Trolley M + Interconnection cable KIT CRUISER 502 H2O WF105: Cruiser 502 + C.U.09 + WF105 + Wheels Kit WF + Trolley M + Interconnection cable 11_2015 47

Cruiser 402-502 Synergic Twin Feeder Version H2O : MIG/MAG Synergic - TIG DC LIFT - MMA - MMA CELLULOSIC - ARC AIR EN: EN 60974-1 - EN 60974-10 3 x 400Vac Cruiser 402/502 Synergic is a professional synergic 3 Phase Inverter Power Source (400A 100% at 40 C) with DOUBLE separated wire feeder and DOUBLE gas bottle holder. The TWIN FEEDER wires and two different gasses with the same power generator. MMA, MMA cellulosic, Lift TIG DC and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Cruiser 402/502 Synergic power source can be easily moved on WF 105 on the wire feeder. curves and memory locations for customized welding parameters assure complete welding process repeatability. Innovative WECO unique HAC (Hybrid Arc Control) supplies a ity and minimal spattering in any working conditions. Post Gas are included for perfect arc ignition and optimum wire cutting at the end of welding. Modular concept allows easy welding system upgrade Up to 8mm diameter electrode welding is possible in MMA Arc Air gouging and cutting up to 6mm electrode Lift TIG DC ignition reduces Tungsten inclusions Cooling Unit available Fan on demand and Built-in Wind Tunnel protects electronic devices from dust and saltiness and improves reliability Push-Pull torch applicable for MIG aluminum welding Technology Special Function Cruiser 402 Synergic 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9-83V 23 1160 x 670 x 1530mm Cruiser 502 Synergic 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9-83V 23 1160 x 670 x 1530mm 11_2015 48

Wire Feeder WF105 For 200mm - 300mm Spools WF105 EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm GENERATOR Cruiser 402 001.0103.0000 Cruiser 502 001.0104.0000 WIRE FEEDER Wire Feeder WF105 001.0319.0000 COOLING UNIT Cooling Unit C.U.09 003.0000.0101 TROLLEY Trolley L 004.0000.0011 Kit TWIN FEEDER (Switching PCB included) 004.0000.0202 Tool BOX VP-01 (AIR VERSION) 004.0000.0201 Kit Twin Bottles 004.0000.0204 Interconnection cable Generator - Trolley mod.l 002.0001.0241 Interconnection cable 70mmq L=2mt H2O 002.0001.0251 Interconnection cable Trolley mod.l - WF105 002.0001.0245 Interconnection cable 70mmq L=0.65mt H2O 002.0001.0255 Earth Cable 70mm2 L=4m 006.0002.0017 Electrode Holder 70mm2 L=4m 006.0002.0025 Torch TIG 26 valve L= 4m 006.0005.0002 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 Torch MIG MB 501D L= 4m H2O 006.0008.0006 KIT CRUISER 402 TWIN FEEDER AIR Cruiser 402 + (2) WF105 + Trolley L + Kit TWIN FEEDER + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT CRUISER 502 TWIN FEEDER AIR Cruiser 502 + (2) WF105 + Trolley L + Kit TWIN FEEDER + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT CRUISER 402 TWIN FEEDER H2O Cruiser 402 + (2) WF105 + Trolley L + Kit TWIN FEEDER + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + KIT CRUISER 502 TWIN FEEDER H2O Cruiser 502 + (2) WF105 + Trolley L + Kit TWIN FEEDER + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + 11_2015 49

Cruiser 402T / 502T Synergic H2O Version : MIG/MAG Synergic - TIG DC HF - MMA - ARC AIR EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology 3 x 400Vac Cruiser 402T/502T Synergic is a professional synergic 3 Phase Inverter Power Source (400A 100% at 40 C) with separated wire feeder for MIG-MAG welding. MMA, TIG DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. welding parameters assure complete welding process repeatability. Innovative WECO unique HAC (Hybrid Arc Control) supplies a soft and very stable MIG-MAG arc with excellent weld Weco Special HF control provides100% rapid and precise arc ignition. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. Version AIR Special Function VP01 CRUISER 402T SYNERGIC 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9/83V 9/83V 9/83V 23 1160 x 670 x 1530mm CRUISER 502T SYNERGIC 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9/83V 9/83V 9/83V 24.3kVA - 22.0kW 23 1160 x 670 x 1530mm 11_2015 50

Wire Feeder WF103 - WF105 For 200mm - 300mm Spools WF103 EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d WF105 d D D MOTOR DRIVE 42VDC 120W N 4 D=30mm - d=22mm EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Cruiser 402T 001.0105.0000 Cruiser 502T 001.0106.0000 Wire Feeder WF103 001.0317.0000 Wire Feeder WF105 001.0319.0000 Wheels Kit WF 010.0000.0012 002.0001.0241 002.0001.0242 002.0001.0243 Cooling Unit C.U.09 003.0000.0101 Interconnection cable 002.0001.0251 Interconnection cable 70mmq L=4mt H2O 002.0001.0252 Interconnection cable 002.0001.0253 Torch MIG MB 501D L= 4m H2O 006.0008.0006 Trolley M 004.0000.0012 Tool BOX VP-01 (AIR VERSION) 004.0000.0201 Earth Cable 70mm2 L=4m 006.0002.0017 Electrode Holder 70mm2 L=4m 006.0002.0025 Torch TIG 18 L=4m H2O PT 006.0005.0006 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321MKS WF105/107 010.0000.0040 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 KIT Cruiser 402T AIR WF103: Cruiser 402T + WF103 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 402T AIR WF105: Cruiser 402T + WF105 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 402T H2O WF103: Cruiser 402T + C.U.09 + WF103 + Wheels Kit WF + Trolley M Interconnection cable KIT Cruiser 402T H2O WF105: Cruiser 402T + C.U.09 + WF105 + Wheels Kit WF + Trolley M Interconnection cable KIT Cruiser 502T AIR WF103: Cruiser 502T + WF103 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 502T AIR WF105: Cruiser 502T + WF105 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 502T H2O WF103: Cruiser 502T + C.U.09 + WF103 + Wheels Kit WF + Trolley M Interconnection cable KIT Cruiser 502T H2O WF105: Cruiser 502T + C.U.09 + WF105 + Wheels Kit WF + Trolley M Interconnection cable 11_2015 51

Cruiser 402T - 502T Synergic Twin Feeder Version H2O : MIG/MAG Synergic - TIG DC HF - MMA - ARC AIR EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Special Function 3 x 400Vac Cruiser 402T/502T Synergic is a professional synergic 3 Phase Inverter Power Source (400A 100% at 40 C) with DOUBLE separated wire feeder and DOUBLE gas bottle holder. The TWIN FEEDER wires and two different gasses with the same power generator. MMA, TIG DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Cruiser 402T/502T Synergic power source can be easily moved WF 105 on the wire feeder. curves and memory locations for customized welding parameters assure complete welding process repeatability. Innovative WECO unique HAC (Hybrid Arc Control) supplies a ity and minimal spattering in any working conditions. Post Gas are included for perfect arc ignition and optimum wire cutting at the end of welding. Weco Special HF control provides100% rapid and precise arc ignition. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. CRUISER 402T SYNERGIC 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9/83V 9/83V 9/83V 23 1160 x 670 x 1530mm CRUISER 502T SYNERGIC 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9/83V 9/83V 9/83V 24.3kVA - 22.0kW 23 1160 x 670 x 1530mm 11_2015 52

Wire Feeder WF105 For 200mm - 300mm Spools WF105 EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm GENERATOR Cruiser 402T 001.0105.0000 Cruiser 502T 001.0106.0000 WIRE FEEDER Wire Feeder WF105 001.0319.0000 COOLING UNIT Cooling Unit C.U.09 003.0000.0101 TROLLEY Trolley L 004.0000.0011 Kit TWIN FEEDER (Switching PCB included) 004.0000.0202 Tool BOX VP-01 (AIR VERSION) 004.0000.0201 Kit Twin Bottles 004.0000.0204 Interconnection cable Generator - Trolley mod.l 002.0001.0241 Interconnection cable 70mmq L=2mt H2O 002.0001.0251 Interconnection cable Trolley mod.l - WF105 002.0001.0245 Interconnection cable 70mmq L=0.65mt H2O 002.0001.0255 Earth Cable 70mm2 L=4m 006.0002.0017 Electrode Holder 70mm2 L=4m 006.0002.0025 Torch TIG 18 L=4m H2O PT 006.0005.0006 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 Torch MIG MB 501D L= 4m H2O 006.0008.0006 KIT CRUISER 402T TWIN FEEDER AIR Cruiser 402T + (2) WF105 + Trolley L + Kit TWIN FEEDER + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT CRUISER 502T TWIN FEEDER AIR Cruiser 502T + (2) WF105 + Trolley L + Kit TWIN FEEDER + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT CRUISER 402T TWIN FEEDER H2O Cruiser 402T + (2) WF105 + Trolley L + Kit TWIN FEEDER + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + KIT CRUISER 502T TWIN FEEDER H2O Cruiser 502T + (2) WF105 + Trolley L + Kit TWIN FEEDER + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + 11_2015 53

Cruiser 402AC/DC - 502AC/DC Synergic H2O Version : MIG/MAG Synergic - TIG AC/DC HF - MMA - ARC AIR EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Special Function CRUISER 402AC/DC SYNERGIC 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 400A 380A 340A 400A 380A 340A 400A 370A 340A 20A - 400A 5A - 400A 10A - 400A 9/81V 9/81V 9/81V 23 1160 x 670 x 1530mm 3 x 400Vac Cruiser 402AC/DC - 502AC/DC Synergic is a professional synergic 3 Phase Inverter Power Source (340A 100% at 40 C) with separated wire feeder for MIG-MAG welding. MMA, TIG AC/DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Cruiser 402T/502T Synergic power source can be eas- - customized welding parameters assure complete welding process repeatability. Innovative WECO unique HAC (Hybrid Arc Control) supplies a soft and very stable MIG-MAG arc with ex- conditions. Weco Special HF control provides100% rapid and precise arc ignition. The AC welding is here optimized thanks to: the calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it that very light gauge sheets can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC obtaining high welding speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC welding is besides useful when welding for The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. CRUISER 502AC/DC SYNERGIC 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 30% 60% 100% 30% 60% 100% 30% 60% 100% 500A 380A 340A 500A 380A 340A 500A 370A 340A 20A - 500A 5A - 500A 5A - 500A 9/81V 9/81V 9/81V 23 1160 x 670 x 1530mm 11_2015 54

Wire Feeder WF103 - WF105 For 200mm - 300mm Spools WF103 EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d WF105 d D D MOTOR DRIVE 42VDC 120W N 4 D=30mm - d=22mm EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Cruiser 402AC/DC 001.0123.0000 Cruiser 502AC/DC 001.0115.0000 Wire Feeder WF103 001.0317.0000 Wire Feeder WF105 001.0319.0000 Wheels Kit WF 010.0000.0012 002.0001.0241 002.0001.0242 002.0001.0243 Cooling Unit C.U.09 003.0000.0101 Interconnection cable 002.0001.0251 Interconnection cable 70mmq L=4mt H2O 002.0001.0252 Interconnection cable 002.0001.0253 Torch MIG MB 501D L= 4m H2O 006.0008.0006 Trolley M 004.0000.0012 Tool BOX VP-01 (AIR VERSION) 004.0000.0201 Earth Cable 70mm2 L=4m 006.0002.0017 Electrode Holder 70mm2 L=4m 006.0002.0025 Torch TIG 18 L=4m H2O PT 006.0005.0006 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321MKS WF105/107 010.0000.0040 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 KIT Cruiser 402AC/DC AIR WF103: Cruiser 402AC/DC + WF103 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 402AC/DC AIR WF105: Cruiser 402AC/DC + WF105 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 402AC/DC H2O WF103: Cruiser 402AC/DC + C.U.09 + WF103 + Wheels Kit WF + Trolley M Interconnection cable KIT Cruiser 402AC/DC H2O WF105: Cruiser 402AC/DC + C.U.09 + WF105 + Wheels Kit WF + Trolley M Interconnection cable KIT Cruiser 502AC/DC AIR WF103: Cruiser 502AC/DC + WF103 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 502AC/DC AIR WF105: Cruiser 502AC/DC + WF105 + Wheels Kit WF + Trolley M + VP-01 KIT Cruiser 502AC/DC H2O WF103: Cruiser 502AC/DC + C.U.09 + WF103 + Wheels Kit WF + Trolley M Interconnection cable KIT Cruiser 502AC/DC H2O WF105: Cruiser 502AC/DC + C.U.09 + WF105 + Wheels Kit WF + Trolley M Interconnection cable 11_2015 55

Cruiser 402AC/DC - 502AC/DC Synergic Twin Feeder Version H2O : MIG/MAG Synergic - TIG AC/DC HF - MMA - ARC AIR EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Special Function 3 x 400Vac Cruiser 402T/502T Synergic is a professional synergic 3 Phase Inverter Power Source (340A 100% at 40 C) with DOUBLE separated wire feeder and DOUBLE gas bottle holder. The TWIN FEEDER wires and two different gasses with the same power generator. MMA, TIG AC/DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the selection of precise welding parameters using any welding wires. Cruiser 402T/502T Synergic power source can be easily moved on the wire feeder. curves and memory locations for customized welding parameters assure complete welding process repeatability. Innovative WECO unique HAC (Hybrid Arc Control) supplies a ity and minimal spattering in any working conditions. Weco Special HF control provides100% rapid and precise arc ignition. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. CRUISER 402AC/DC SYNERGIC 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 400A 380A 340A 400A 380A 340A 400A 370A 340A 20A - 400A 5A - 400A 10A - 400A 9/81V 9/81V 9/81V 23 1160 x 670 x 1530mm CRUISER 502AC/DC SYNERGIC 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 30% 60% 100% 30% 60% 100% 30% 60% 100% 500A 380A 340A 500A 380A 340A 500A 370A 340A 20A - 500A 5A - 500A 5A - 500A 9/81V 9/81V 9/81V 23 1160 x 670 x 1530mm 11_2015 56

Wire Feeder WF105 For 200mm - 300mm Spools WF105 EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm GENERATOR Cruiser 402AC/DC 001.0123.0000 Cruiser 502AC/DC 001.0115.0000 WIRE FEEDER Wire Feeder WF105 001.0319.0000 COOLING UNIT Cooling Unit C.U.09 003.0000.0101 TROLLEY Trolley L 004.0000.0011 Kit TWIN FEEDER (Switching PCB included) 004.0000.0202 Tool BOX VP-01 (AIR VERSION) 004.0000.0201 Kit Twin Bottles 004.0000.0204 Interconnection cable Generator - Trolley mod.l 002.0001.0241 Interconnection cable 70mmq L=2mt H2O 002.0001.0251 Interconnection cable Trolley mod.l - WF105 002.0001.0245 Interconnection cable 70mmq L=0.65mt H2O 002.0001.0255 Earth Cable 70mm2 L=4m 006.0002.0017 Electrode Holder 70mm2 L=4m 006.0002.0025 Torch TIG 18 L=4m H2O PT 006.0005.0006 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 Torch MIG MB 501D L= 4m H2O 006.0008.0006 KIT CRUISER 402AC/DC TWIN FEEDER AIR Cruiser 402AC/DC + (2) WF105 + Trolley L + Kit TWIN FEEDER + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT CRUISER 502AC/DC TWIN FEEDER AIR Cruiser 502AC/DC + (2) WF105 + Trolley L + Kit TWIN FEEDER + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT CRUISER 402AC/DC TWIN FEEDER H2O Cruiser 402AC/DC + (2) WF105 + Trolley L + Kit TWIN FEEDER + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + KIT CRUISER 502AC/DC TWIN FEEDER H2O Cruiser 502AC/DC + (2) WF105 + Trolley L + Kit TWIN FEEDER + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + 11_2015 57

Note... 11_2015 58

11_2015 59

MicroPulse 302 MFK For 200mm - 300mm Spools 3 x 400Vac MicroMAG 302 MFK designed Inverter for MIG/MAG Synergic, Pulse Synergic and Double Pulse Synergic, MMA and Lift TIG Arc welding. only 24kg - Pulse Synergic and Double Pulse Synergic modes guarantee excellent bead appearance wthout spatters and deformations of MicroMAG 302 MFK - A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) MIG/MAG Pulse/Double Pulse/Synergic - TIG DC LIFT - MMA EN: EN 60974-1 - EN 60974-5 - EN 60974-10 Technology Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers Remote Controlled by MIG-torch DIGIMANAGER 240 and RC unit Special Function MicroPulse 302 MFK 3x400Vac ± 15% @ 50-60Hz 16A MIG-MAG TIG - WIG MMA % 40 C 35% 60% 100% 50% 60% 100% 40% 60% 100% 300A 230A 200A 250A 240A 210A 250A 220A 190A % RT - 60% 100% - - 100% - - 100% - 300A 250A - - 250A - - 250A 20A - 300A 5A - 250A 5A - 250A 11/60V 23S 560 x 280 x 390mm 11_2015 60

MOTOR DRIVE 42VDC 45W MicroPulse 302 MFK 001.0121.0000 Cooling Unit C.U.11 003.0000.0131 Trolley 03 006.0002.0042 d D n 4 (ø30mm - ø14mm) SLIDING KIT 5 MicroMAG 302 010.0000.0045 Electrode Holder 35mm2 L=4m 006.0002.0028 Earth Cable 35mm2 L=4m 006.0002.0003 Torch MIG 36 L= 4m AIR EURO 006.0008.0004 Torch MIG 240 L= 4m H2O EURO 006.0008.0007 KIT Digimanager 010.0000.0049 Torch MIG MB 240D L=4m Digimanager 006.0008.0017 RC08 Remote Control Digimanager 006.0003.0124 Cable RC08 L=5m 14pins 022.0002.0280 Cable RC08 L=10m 14pins 022.0002.0281 Cable RC08 L=15m 14pins 022.0002.0282 Torch TIG 26 L= 4m AIR EURO 006.0005.0011 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321MKS WF105/107 010.0000.0040 MicroPulse 302 MFK + C.U.11 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 ROLL 0.6/0.8 D=30 d=14 V 002.0000.0119 ROLL 0.8/1.0 D=30 d=14 V 002.0000.0120 ROLL 1.0/1.2 D=30 d=14 V 002.0000.0121 ROLL 0.8/1.0 D=30 d=14 U 002.0000.0122 ROLL 1.0/1.2 D=30 d=14 U 002.0000.0123 ROLL 1.0/1.2 D=30 d=14 VK 002.0000.0124 Suggested composition: MicroPulse 302 MFK + C.U.11 + Torch MIG 240 L= 4m H2O EURO + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER Trolley 03 MicroPulse 302 MFK + C.U.11 + TROLLEY 03 11_2015 61

Pioneer Pulse 321MKS For 200mm - 300mm Spools Version H2O 3 x 400Vac Pioneer Pulse 321MKS is professional 3 Phase Inverter Power Source (320A 45% at 40 C)MIG-MAG available modes are: Man- Pulse Synergic and Double Pulse Synergic modes guarantee excellent bead appearance wthout spatters and deformations of Pioneer Pulse 321MKS - A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input : MIG/MAG Pulse/Double Pulse/Synergic EN: EN 60974-1 - EN 60974-5 - EN 60974-10 Technology Special Function Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers Pioneer Pulse 321MKS areas tanks to robust and big wheels. - Cooling Unit available vices from dust and saltiness and improves reliability for optimal penetration at start and crater _lling at bead s end - Memory locations for welding process repeatability - Push-Pull torch applicable for MIG aluminum welding - Remote Controlled by MIG-torch DIGIMANAGER 240 and RC unit - Phases Control Device to supervise the right connection to the electrical NET Pioneer Pulse 321 MKS 3x400Vac ± 15% @ 50-60Hz 25A MIG/MAG 45% 60% 100% 320A 280A 230A 20A - 320A 71V 14.6kVA - 10.9KW 23 1110 x 550 x 805mm 11_2015 62

MOTOR DRIVE 42VDC Pioneer Pulse 321MKS 001.0070.0000 120W Cooling Unit C.U.07B 003.0000.0121 Torch MIG 36 L= 4m AIR EURO 006.0008.0004 d D N 4 D=37mm - d=19mm Torch MIG 240 L= 4m AIR EURO 006.0008.0007 KIT Digimanager 010.0000.0049 Torch MIG MB 240D L=4m Digimanager 006.0008.0017 RC08 Remote Control Digimanager 006.0003.0124 Cable RC08 L=5m 14pins 022.0002.0280 Cable RC08 L=10m 14pins 022.0002.0281 Cable RC08 L=15m 14pins 022.0002.0282 Earth Cable 70mm2 L=4m 006.0002.0017 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321 PULSE / WF104 010.0000.0039 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 ROLL 0.6/0.8 D=37 d=19 V 002.0000.0140 ROLL 0.8/1.0 D=37 d=19 V 002.0000.0141 ROLL 1.0/1.2 D=37 d=19 V 002.0000.0142 ROLL 0.8/1.0 D=37 d=19 U 002.0000.0144 ROLL 1.0/1.2 D=37 d=19 U 002.0000.0145 ROLL 1.0/1.2 D=37 d=19 VK 002.0000.0149 ROLL D=37 d=19 LISCIO 002.0000.0152 ROLL D=37 d=19 knurled 002.0000.0153 Suggested composition AIR: Pioneer Pulse 321 HSL + Torch MIG 36 L= 4m AIR EURO + Earth Cable 70mm2 L=4m + Gas regulator MANOMETER Suggested composition H2O: Pioneer Pulse 321 HSL + C.U.07B + Torch MIG MB 240D L=4m Digimanager + Earth Cable 70mm2 L=4m + Gas regulator MANOMETER 11_2015 63

Pioneer Pulse 321MSR For 200mm - 300mm Spools 3 x 400Vac Pioneer Pulse 321MSR is a professional 3 Phase Inverter Power Source with separated wire feeder WF 104. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers : MIG/MAG Pulse/Double Pulse/Synergic EN: EN 60974-1 - EN 60974-5 - EN 60974-10 Technology Pioneer Pulse 321MSR areas tanks to robust and big wheels. - Cooling Unit available vices from dust and saltiness and improves reliability for optimal penetration at start and crater _lling at bead s end - Memory locations for welding process repeatability - Push-Pull torch applicable for MIG aluminum welding - Remote Controlled by MIG-torch DIGIMANAGER 240 and RC unit - Phases Control Device to supervise the right connection to the electrical NET Special Function Pioneer Pulse 321 MSR 3x400Vac ± 15% @ 50-60Hz 25A MIG/MAG 45% 60% 100% 320A 280A 230A 20A - 320A 71V 14.6kVA - 10.9KW 23 1110 x 550 x925mm 11_2015 64

Wire Feeder WF104 For 200mm - 300mm Spools EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Pioneer Pulse 321MSR 001.0129.0000 Wire Feeder WF104 001.0315.0000 Wheels Kit WF 010.0000.0012 002.0001.0241 002.0001.0242 002.0001.0243 Cooling Unit C.U.07B 003.0000.0121 002.0001.0251 Interconnection cable 70mmq L=4mt H2O 002.0001.0252 002.0001.0253 Torch MIG 36 L= 4m AIR EURO 006.0008.0004 Torch MIG 240 L= 4m H2O EURO 006.0008.0007 KIT Digimanager 010.0000.0049 Torch MIG MB 240D L=4m Digimanager 006.0008.0017 RC08 Remote Control Digimanager 006.0003.0124 Cable RC08 L=5m 14poli 022.0002.0280 Cable RC08 L=10m 14poli 022.0002.0281 Cable RC08 L=15m 14poli 022.0002.0282 Earth Cable 70mm2 L=4m 006.0002.0017 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321MKS WF105/107 010.0000.0040 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 ROLL 0.6/0.8 D=37 d=19 V 002.0000.0140 ROLL 0.8/1.0 D=37 d=19 V 002.0000.0141 ROLL 1.0/1.2 D=37 d=19 V 002.0000.0142 ROLL 1.2/1.6 D=37 d=19 V 002.0000.0143 ROLL 0.8/1.0 D=37 d=19 U 002.0000.0144 ROLL 1.0/1.2 D=37 d=19 U 002.0000.0145 ROLL 1.2/1.6 D=37 d=19 U 002.0000.0146 ROLL 1.0/1.2 D=37 d=19 VK 002.0000.0149 ROLLO 1.2/1.6 D=37 d=19 VK 002.0000.0150 Suggested composition AIR: Pioneer Pulse 321MSR + WF104 + Wheels Kit WF + Interconnection cable L=4mt AIR + Torch MIG 36 L= 4m AIR EURO + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER Suggested composition H2O: Pioneer Pulse 321MSR + C.U.07B + WF104 + Wheels Kit WF + Interconnection cable L=4mt H2O + Torch MIG 240 L= 4m H2O + Earth Cable 35mm2 L=4m + Gas regulator MANOMETER 11_2015 65

Power Pulse 402 / 502 Version H2O 3 x 400Vac Power Pulse 402/502 is an Heavy Duty (400A 100% at 40 C) professional 3 Phase Inverter Power Source with separated wire feeder. MMA, MMA cellulosic, Lift TIG DC and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers : MIG/MAG Pulse/Double Pulse/Synergic - TIG DC LIFT - MMA - MMA CELL - ARC AIR EN: EN 60974-1 - EN 60974-10 Technology - Modular concept allows multi-welding processes - Cooling Unit available vices from dust and saltiness and improves reliability for optimal penetration at start and crater _lling at bead s end - Memory locations for welding process repeatability - Push-Pull torch applicable for MIG aluminum welding - Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit Special Function Power Pulse 402 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9/83V 9/83V 9/83V 23 1160 x 670 x 1530mm Power Pulse 502 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9/83V 9/83V 9/83V 24.3kVA - 22.0kW 23 1160 x 670 x 1530mm 11_2015 66

Wire Feeder WF104 For 200mm - 300mm Spools EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Power Pulse 402 001.0107.0000 Power Pulse 502 001.0108.0000 Wire Feeder WF104 001.0315.0000 Wheels Kit WF 010.0000.0012 002.0001.0241 002.0001.0242 002.0001.0243 Cooling Unit C.U.09 003.0000.0101 Interconnection cable 002.0001.0251 Interconnection cable 70mmq L=4mt H2O 002.0001.0252 Interconnection cable 002.0001.0253 Torch MIG MB 501D L= 4m H2O 006.0008.0006 KIT Digimanager 010.0000.0049 Torch MIG MB 501D L=4m Digimanager 006.0008.0018 RC08 Remote Control Digimanager 006.0003.0124 Cable RC08 L=5m 14poli 022.0002.0280 Cable RC08 L=10m 14poli 022.0002.0281 Cable RC08 L=15m 14poli 022.0002.0282 Trolley M 004.0000.0012 Tool BOX VP-01 (AIR VERSION) 004.0000.0201 Earth Cable 70mm2 L=4m 006.0002.0017 Electrode Holder 70mm2 L=4m 006.0002.0025 Torch TIG 26 valve L= 4m 006.0005.0002 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321 PULSE / WF104 010.0000.0039 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 KIT Power Pulse 402 HSL AIR Power Pulse 402 + WF104 + Kit ruote WF + Trolley M + Tool BOX VP-01 + KIT Power Pulse 502 HSL AIR Power Pulse 502 + WF104 + Kit ruote WF + Trolley M + Tool BOX VP-01 + KIT Power Pulse 402 HSL H2O Power Pulse 402 + C.U.09 + WF104 + Kit ruote WF + Trolley M + Interconnection cable KIT Power Pulse 502 HSL H2O Power Pulse 502 + C.U.09 + WF104 + Kit ruote WF + Trolley M + Interconnection cable 11_2015 67

Power Pulse 402/502 Twin Feeder Version H2O 3 x 400Vac Power Pulse 402/502 TWIN FEEDER is an Heavy Duty (400A 100% at 40 C) professional 3 Phase Inverter Power Source with DOUBLE separated wire feeder and DOUBLE gas bottle holder. MMA, MMA cellulosic, Lift TIG DC and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers : MIG/MAG Pulse/Double Pulse/Synergic - TIG DC LIFT - MMA - MMA CELL - ARC AIR EN: EN 60974-1 - EN 60974-10 Technology - Modular concept allows multi-welding processes - Cooling Unit available vices from dust and saltiness and improves reliability for optimal penetration at start and crater _lling at bead s end - Memory locations for welding process repeatability - Push-Pull torch applicable for MIG aluminum welding - Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit Special Function Power Pulse 402 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9/83V 9/83V 9/83V 23 1160 x 670 x 1530mm Power Pulse 502 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9/83V 9/83V 9/83V 24.3kVA - 22.0kW 23 1160 x 670 x 1530mm 11_2015 68

Wire Feeder WF104 For 200mm - 300mm Spools WF104 EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm GENERATOR Power Pulse 402 001.0107.0000 Power Pulse 502 001.0108.0000 WIRE FEEDER Wire Feeder WF104 001.0315.0000 COOLING UNIT Cooling Unit C.U.09 003.0000.0101 TROLLEY Trolley L 004.0000.0011 Kit TWIN FEEDER (Switching PCB included) 004.0000.0202 Tool BOX VP-01 (AIR VERSION) 004.0000.0201 Kit Twin Bottles 004.0000.0204 Interconnection cable Generator - Trolley mod.l 002.0001.0241 Interconnection cable 70mmq L=2mt H2O 002.0001.0251 Interconnection cable Trolley mod.l - WF104 002.0001.0245 Interconnection cable 70mmq L=0.65mt H2O 002.0001.0255 Earth Cable 70mm2 L=4m 006.0002.0017 Electrode Holder 70mm2 L=4m 006.0002.0025 Torch TIG 26 valve L= 4m 006.0005.0002 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 Torch MIG MB 501D L= 4m H2O 006.0008.0006 KIT Digimanager 010.0000.0049 Torch MIG MB 501D L=4m Digimanager 006.0008.0018 RC08 Remote Control Digimanager 006.0003.0124 Cable RC08 L=5m 14poli 022.0002.0280 Cable RC08 L=10m 14poli 022.0002.0281 Cable RC08 L=15m 14poli 022.0002.0282 KIT POWER PULSE 402 TWIN FEEDER AIR Power Pulse 402 + (2) WF104 + Trolley L + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT POWER PULSE 502 TWIN FEEDER AIR Power Pulse 502 + (2) WF104 + Trolley L + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT POWER PULSE 402 TWIN FEEDER H2O Power Pulse 402 + (2) WF104 + Trolley L + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + KIT POWER PULSE 502 TWIN FEEDER H2O Power Pulse 502 + (2) WF104 + Trolley L + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + 11_2015 69

Power Pulse 402T / 502T H2O Version 3 x 400Vac Power Pulse 402T / 502T is an Heavy Duty (400A 100% at 40 C) professional Multifunction 3 Phase Inverter Power Source with separated wire feeder WF 104. MMA, TIG DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers : MIG/MAG Pulse/Double Pulse/Synergic - TIG DC HF - MMA - ARC AIR EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Mig Mag Special Function The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an enhanced The Q-Start function time for it at the beginning of the welding process. The Multi-Tack function welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function It allows the positioning of the electrode on the exact tacking spot. Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit Version AIR Tig Special Function VP01 Power Pulse 402T 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9/83V 9/83V 9/83V 23 1160 x 670 x 1530mm Power Pulse 502T 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9/83V 9/83V 9/83V 24.3kVA - 22.0kW 23 1160 x 670 x 1530mm 11_2015 70

Wire Feeder WF104 For 200mm - 300mm Spools WF104 EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Power Pulse 402T 001.0117.0000 Power Pulse 502T 001.0118.0000 Wire Feeder WF104 001.0315.0000 Wheels Kit WF 010.0000.0012 002.0001.0241 002.0001.0242 002.0001.0243 Cooling Unit C.U.09 003.0000.0101 Interconnection cable 002.0001.0251 Interconnection cable 70mmq L=4mt H2O 002.0001.0252 Interconnection cable 002.0001.0253 Torch MIG MB 501D L= 4m H2O 006.0008.0006 KIT Digimanager 010.0000.0049 Torch MIG MB 501D L=4m Digimanager 006.0008.0018 RC08 Remote Control Digimanager 006.0003.0124 Cable RC08 L=5m 14poli 022.0002.0280 Cable RC08 L=10m 14poli 022.0002.0281 Cable RC08 L=15m 14poli 022.0002.0282 Trolley M 004.0000.0012 Tool BOX VP-01 (AIR VERSION) 004.0000.0201 Earth Cable 70mm2 L=4m 006.0002.0017 Electrode Holder 70mm2 L=4m 006.0002.0025 Torch TIG 18 L=4m H2O PT 006.0005.0006 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321 PULSE / WF104 010.0000.0039 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 KIT Power Pulse 402T AIR Power Pulse 402T + WF104 + Kit ruote WF + Trolley M + Tool BOX VP-01 + KIT Power Pulse 502T AIR Power Pulse 502T + WF104 + Kit ruote WF + Trolley M + Tool BOX VP-01 + KIT Power Pulse 402T H2O Power Pulse 402T + C.U.09 + WF104 + Kit ruote WF + Trolley M + Interconnection cable KIT Power Pulse 502T H2O Power Pulse 502T + C.U.09 + WF104 + Kit ruote WF + Trolley M + Interconnection cable 11_2015 71

Power Pulse 402T/502T Twin Feeder Version H2O 3 x 400Vac Power Pulse 402T / 502T TWIN FEEDER is an Heavy Duty (400A 100% at 40 C) professional Multifunction 3 Phase Inverter Power Source with DOUBLE separated wire feeder and DOU- BLE gas bottle holder. MMA, TIG DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input : MIG/MAG Pulse/Double Pulse/Synergic - TIG DC HF - MMA - ARC AIR EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Mig Mag Special Function Tig Special Function Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an avoiding any gluing between electrode and base metal; it allows at any welding conditions. The Q-Start function minimize the time for it at the beginning of the welding process. The Multi-Tack function during the welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function and sheet deformation. It allows the positioning of the electrode on the exact tacking spot. Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit Power Pulse 402T 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 100% 100% 100% 400A 400A 400A 20A - 400A 5A - 400A 5A - 400A 9/83V 9/83V 9/83V 23 1160 x 670 x 1530mm Power Pulse 502T 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 500A 450A 400A 500A 460A 400A 500A 450A 400A 20A - 500A 5A - 500A 5A - 500A 9/83V 9/83V 9/83V 24.3kVA - 22.0kW 23 1160 x 670 x 1530mm 11_2015 72

Wire Feeder WF104 For 200mm - 300mm Spools WF104 EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm GENERATOR Power Pulse 402T 001.0117.0000 Power Pulse 502T 001.0118.0000 WIRE FEEDER Wire Feeder WF104 001.0315.0000 COOLING UNIT Cooling Unit C.U.09 003.0000.0101 TROLLEY Trolley L 004.0000.0011 Kit TWIN FEEDER (Switching PCB included) 004.0000.0202 Tool BOX VP-01 (AIR VERSION) 004.0000.0201 Kit Twin Bottles 004.0000.0204 Interconnection cable Generator - Trolley mod.l 002.0001.0241 Interconnection cable 70mmq L=2mt H2O 002.0001.0251 Interconnection cable Trolley mod.l - WF104 002.0001.0245 Interconnection cable 70mmq L=0.65mt H2O 002.0001.0255 Earth Cable 70mm2 L=4m 006.0002.0017 Electrode Holder 70mm2 L=4m 006.0002.0025 Torch TIG 18 L=4m H2O PT 006.0005.0006 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 Torch MIG MB 501D L= 4m H2O 006.0008.0006 KIT Digimanager 010.0000.0049 Torch MIG MB 501D L=4m Digimanager 006.0008.0018 RC08 Remote Control Digimanager 006.0003.0124 Cable RC08 L=5m 14poli 022.0002.0280 Cable RC08 L=10m 14poli 022.0002.0281 Cable RC08 L=15m 14poli 022.0002.0282 KIT POWER PULSE 402T TWIN FEEDER AIR Power Pulse 402T + (2) WF104 + Trolley L + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT POWER PULSE 502T TWIN FEEDER AIR Power Pulse 502T + (2) WF104 + Trolley L + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT POWER PULSE 402T TWIN FEEDER H2O Power Pulse 402T + (2) WF104 + Trolley L + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + KIT POWER PULSE 502T TWIN FEEDER H2O Power Pulse 502T + (2) WF104 + Trolley L + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + 11_2015 73

Power Pulse 402AC/DC - 502AC/DC H2O Version 3 x 400Vac Power Pulse 402AC/DC / 502AC/DC is an Heavy Duty professional Multifunction 3 Phase Inverter Power Source with separated wire feeder WF 104. MMA, TIG AC/DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers : MIG/MAG Pulse/Double Pulse/Synergic - TIG AC/DC HF - MMA - ARC AIR EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology The AC welding is here optimized thanks to: calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it possible to create a can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC in order to reduce the deformation on the base material. Mig Mag Special Function Tig Special Function The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an enhanced The Q-Start function time for it at the beginning of the welding process. The Multi-Tack function welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function It allows the positioning of the electrode on the exact tacking spot. Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit POWER PULSE 402AC/DC 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 400A 380A 340A 400A 380A 340A 400A 370A 340A 20A - 400A 5A - 400A 10A - 400A 9/81V 9/81V 9/81V 23 1160 x 670 x 1530mm POWER PULSE 502AC/DC 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 30% 60% 100% 30% 60% 100% 30% 60% 100% 500A 380A 340A 500A 380A 340A 500A 370A 340A 20A - 500A 5A - 500A 5A - 500A 9/81V 9/81V 9/81V 23 1160 x 670 x 1530mm 11_2015 74

Wire Feeder WF104 For 200mm - 300mm Spools WF104 EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm Power Pulse 402AC/DC 001.0124.0000 Power Pulse 502AC/DC 001.0125.0000 Wire Feeder WF104 001.0315.0000 Wheels Kit WF 010.0000.0012 002.0001.0241 002.0001.0242 002.0001.0243 Cooling Unit C.U.09 003.0000.0101 Interconnection cable 002.0001.0251 Interconnection cable 70mmq L=4mt H2O 002.0001.0252 Interconnection cable 002.0001.0253 Torch MIG MB 501D L= 4m H2O 006.0008.0006 KIT Digimanager 010.0000.0049 Torch MIG MB 501D L=4m Digimanager 006.0008.0018 RC08 Remote Control Digimanager 006.0003.0124 Cable RC08 L=5m 14poli 022.0002.0280 Cable RC08 L=10m 14poli 022.0002.0281 Cable RC08 L=15m 14poli 022.0002.0282 Trolley M 004.0000.0012 Tool BOX VP-01 (AIR VERSION) 004.0000.0201 Earth Cable 70mm2 L=4m 006.0002.0017 Electrode Holder 70mm2 L=4m 006.0002.0025 Torch TIG 18 L=4m H2O PT 006.0005.0006 RC04 Remote Control 2 potentiometers 006.0003.0121 RC05 Remote Control 1 up/down 006.0003.0122 RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 PUSH PULL KIT 321 PULSE / WF104 010.0000.0039 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 KIT Power Pulse 402AC/DC AIR Power Pulse 402AC/DC + WF104 + Wheels Kit WF + Trolley M + Tool BOX VP-01 + KIT Power Pulse 502AC/DC AIR Power Pulse 502AC/DC + WF104 + Wheels Kit WF + Trolley M + Tool BOX VP-01 + KIT Power Pulse 402AC/DC H2O Power Pulse 402AC/DC + C.U.09 + WF104 + Wheels Kit WF + Trolley M + Interconnection cable KIT Power Pulse 502AC/DC H2O Power Pulse 502AC/DC + C.U.09 + WF104 + Wheels Kit WF + Trolley M + Interconnection cable 11_2015 75

Power Pulse 402AC/DC - 502AC/DC Twin Feeder Version H2O 3 x 400Vac Power Pulse 402AC/DC - 502AC/DC TWIN FEEDER is an Heavy Duty professional Multifunction 3 Phase Inverter Power Source with DOUBLE separated wire feeder and DOUBLE gas bottle holder. MMA, TIG AC/DC HF and ARC AIR cutting and gouging processes are also available. A wide range of MIG-MAG synergic programs facilitate the fast selection of precise welding parameters using any welding wires: MAT (wire type) ø (wire diameter) Gas (shielded gas type) Pulse HS allows to: 1 - Increase considerably execution speed 2 - Increase deposition rate (Kg/h) 3 - Deeper penetration, lower risk of lack of fusion and deformations. 4 - Reduce heat input Power Focus allows to: 1 - Deeper penetration, lower risk of lack of fusion and deformations. 2 - Increase considerably execution speed 3 - More arc stability even with longer stick-out 4 - Low costs of mechanical preparation of caulkers : MIG/MAG Pulse/Double Pulse/Synergic - TIG AC/DC HF - MMA - ARC AIR EN: EN 60974-1 - EN 60974-3 - EN 60974-10 Technology Mig Mag Special Function Tig Special Function The AC welding is here optimized thanks to: calibration of the tungsten electrode s diameter. The EXTRA FUSION function allows to shift the waveform towards the negative part with respect to zero. This makes it possible to create a can be welded with an electrode tip comparable to that of an electrode for DC- TIG welding. The MIX AC-DC speed and creating the weld puddle rapidly on a cold work piece. It is also possible to weld heavier aluminium gauges with lower amperage compared to standard AC/DC TIG welding. The PULSE AC/DC in order to reduce the deformation on the base material. The DC welding is here optimized thanks to: TIG PULS up to 2,5 Khz The Dynamic Arc (DYNarc) function which ensures an enhanced The Q-Start function time for it at the beginning of the welding process. The Multi-Tack function welding process and reduces the base material s oxidation. This function permits often to avoid the post welding acid-treatments. The Q-Spot function It allows the positioning of the electrode on the exact tacking spot. Remote Controlled by MIG-torch DIGIMANAGER 501 and RC unit POWER PULSE 402AC/DC 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 50% 60% 100% 50% 60% 100% 50% 60% 100% 400A 380A 340A 400A 380A 340A 400A 370A 340A 20A - 400A 5A - 400A 10A - 400A 9/81V 9/81V 9/81V 23 1160 x 670 x 1530mm POWER PULSE 502AC/DC 3x400Vac ± 15% @ 50-60Hz 32A MIG - MAG TIG - WIG MMA 30% 60% 100% 30% 60% 100% 30% 60% 100% 500A 380A 340A 500A 380A 340A 500A 370A 340A 20A - 500A 5A - 500A 5A - 500A 9/81V 9/81V 9/81V 23 1160 x 670 x 1530mm 11_2015 76

Wire Feeder WF104 For 200mm - 300mm Spools WF104 EN: EN 60974-5 - EN 60974-10 Portable 4-roll drive wire feeder Optical encoder on motor drive for maximum precision of the wire-feed speed. 120W motor drive d D MOTOR DRIVE 42VDC 120W N 4 D=37mm - d=19mm GENERATOR Power Pulse 402AC/DC 001.0124.0000 Power Pulse 502AC/DC 001.0125.0000 WIRE FEEDER Wire Feeder WF104 001.0315.0000 COOLING UNIT Cooling Unit C.U.09 003.0000.0101 TROLLEY Trolley L 004.0000.0011 Kit TWIN FEEDER (Switching PCB included) 004.0000.0202 Tool BOX VP-01 (AIR VERSION) 004.0000.0201 Kit Twin Bottles 004.0000.0204 Interconnection cable Generator - Trolley mod.l 002.0001.0241 Interconnection cable 70mmq L=2mt H2O 002.0001.0251 Interconnection cable Trolley mod.l - WF104 002.0001.0245 Interconnection cable 70mmq L=0.65mt H2O 002.0001.0255 Earth Cable 70mm2 L=4m 006.0002.0017 Electrode Holder 70mm2 L=4m 006.0002.0025 Torch TIG 18 L=4m H2O PT 006.0005.0006 Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER 006.0002.0005 Torch MIG MB 501D L= 4m H2O 006.0008.0006 KIT Digimanager 010.0000.0049 Torch MIG MB 501D L=4m Digimanager 006.0008.0018 RC08 Remote Control Digimanager 006.0003.0124 Cable RC08 L=5m 14poli 022.0002.0280 Cable RC08 L=10m 14poli 022.0002.0281 Cable RC08 L=15m 14poli 022.0002.0282 KIT POWER PULSE 402AC/DC TWIN FEEDER AIR Power Pulse 402AC/DC + (2) WF104 + Trolley L + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT POWER PULSE 502AC/DC TWIN FEEDER AIR Power Pulse 502AC/DC + (2) WF104 + Trolley L + Tool BOX VP-01 + Kit Twin Bottles + Interconnection cable AIR L=2m AIR + KIT POWER PULSE 402AC/DC TWIN FEEDER H2O Power Pulse 402AC/DC + (2) WF104 + Trolley L + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + KIT POWER PULSE 502AC/DC TWIN FEEDER H2O Power Pulse 502AC/DC + (2) WF104 + Trolley L + C.U.09 + Kit Twin Bottles + Interconnection cable L=2m H2O + 11_2015 77

Note... 11_2015 78

Plasma Cutting 11_2015 79

Discovery 35P 1 x 230Vac Discovery 35P is a portable Single Phase Inverter Power Source for PLASMA cutting. Its reliable industrial construction is suitable Discovery 35P is ideal for cutting steel and non-ferrous material up to 10mm thickness. Friendly-user interface allows precise parameters setting. sparing time and increasing productivity. Start without High Frequency avoids interferences with electronical devices. Grating function permits continuous cutting of grates and expanded metal. Light weight and reliable Handle and Shoulder Strap for easy carrying Inverter Power Source reduces energy demand and gives the best arc performance : PLASMA EN: EN 60974-1 - EN 60974-10 Technology DISCOVERY 35P 1x230Vac ± 15% @ 50-60Hz 25A PLASMA 45% 60% 100% 35A 30A 27A 20A 35A 0V 23S 450 x 160 x 260mm 10.6Kg Discovery 35P 001.0101.0000 OVERCUT BOX (Generator Protection) 006.0002.0040 Earth Cable 16mm2 L=3m 006.0002.0010 Suggested composition: Discovery 35P + OVERCUT + Earth Cable 11_2015 80

ACCESSORIES COOLING UNITS 76 SLIDING KIT / TROLLEY 77 REMOTE CONTROLS 79 PUSH PULL KIT 80 OVERCUT 81 GAS REGULATOR 81 SUITCASES 82 ELECTRODE HOLDER - EARTH CABLES 83 TIG TORCHES 84 MIG MAG TORCHES 86 SOFTWARE UPGRADING KIT 88 FEEDING ROLLS 89 11_2015 81

Cooling Unit CU 07B Cooling Unit CU 09 P1 l/min P max Cooling Unit 07B 1x230Vac ± 15% @ 50-60Hz 23S 280 x 142 x 570mm C.U.07B 003.0000.0121 P1 l/min P max Cooling Unit 09 1x400Vac ± 15% @ 50-60Hz 23S 720 x 290 x 235mm C.U.09 003.0000.0101 Cooling Unit CU 12 Cooling Unit CU 11 P1 l/min Pmax l/min P max C.U.12 003.0000.0151 Cooling Unit 12 1x230Vac ± 15% @ 50-60Hz 4A @ 700W 1.1KW 23 530 x 230 x 210mm P1 l/min Pmax l/min P max C.U.11 003.0000.0131 Cooling Unit 11 1x400Vac ± 15% @ 50-60Hz 2.8kW 4.5l 23 600 x 290 x 240mm 18Kg (22.5Kg) 11_2015 82

Sliding Kit 2 MACHINE Sliding KIT 2 010.0000.0017 MicroMAG 301 PLUS Sliding Kit 3 Sliding Kit 5 MACHINE Sliding KIT 3 010.0000.0018 MicroMAG 301 PLUS Sliding KIT 5 010.0000.0045 MicroMAG 302 MFK Sliding Kit 6 Sliding Kit 7 MACHINE Sliding KIT 6 010.0000.0048 Discovery 220T - 300T - 200AC/DC - 221AC/DC - 300AC/DC Sliding KIT 7 010.0000.0051 Multipower 184-204T 11_2015 83

Trolley 02 Trolley 03 TROLLEY 02 630 x 420 x 1110mm Trolley 02 006.0002.0014 TROLLEY 03 660 x 650 x 1110mm Trolley 03 006.0002.0042 Trolley E Trolley H TROLLEY E 1120 x 400 x 690 mm Trolley E 004.0000.0005 TROLLEY H 850 x 340 x 570 mm Trolley H 004.0000.0008 11_2015 84

Trolley L Trolley M TROLLEY L 630 x 420 x1110 mm Trolley L 36Kg - VP-01 13Kg Trolley L 004.0000.0011 VP-01 004.0000.0201 TROLLEY M 630 x 420 x1110 mm Trolley M 36Kg - VP-01 13Kg Trolley M 004.0000.0012 VP-01 004.0000.0201 Trolley P TROLLEY P 1015 x 500 x 900 mm Trolley P 004.0000.0014 11_2015 85

RC02 Foot pedal TECHNICAL DATA 6-10 PINS 100KOhm RC02 Foot pedal 006.0003.0102 Cable RC02 L=5m 022.0003.0105 Cable RC02 L=10m 022.0003.0106 Cable RC02 L=15m 022.0003.0107 RC03 Single Potentiometer TECHNICAL DATA 14 PINS 100KOhm RC03 Remote Control 1 potentiometer 006.0003.0120 Cable RC03 L=5m 6pins 022.0002.0166 Cable RC03 L=10m 6pins 022.0002.0167 Cable RC03 L=15m 6pins 022.0002.0168 RC04 Double Potentiometer TECHNICAL DATA 14 PINS 2 x 100KOhm RC04 Remote Control 2 potentiometers 006.0003.0121 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 RC05 Single Up & Down TECHNICAL DATA 14 PINS RC05 Remote Control 1 up/down 006.0003.0122 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 11_2015 86

RC06 Double Up & Down TECHNICAL DATA 14pins RC06 Remote Control 2 up/down 006.0003.0123 Cable RC03/04/05/06 L=5m 14pins 022.0002.0172 Cable RC03/04/05/06 L=10m 14pins 022.0002.0173 Cable RC03/04/05/06 L=15m 14pins 022.0002.0174 RC08 Remote Control Digimanager TECHNICAL DATA 14pins CODICE KIT Digimanager 010.0000.0049 RC08 Remote Control Digimanager 006.0003.0124 Cable RC08 L=5m 14pins 022.0002.0280 Cable RC08 L=10m 14pins 022.0002.0281 Cable RC08 L=15m 14pins 022.0002.0282 Kit Digimanager Kit Push-Pull TECHNICAL DATA INPUT 48VAC OUTPUT 42VDC KIT PUSH PULL 321 PULSE / WF104 010.0000.0039 KIT PUSH PULL 320MKS WF105/107 010.0000.0040 11_2015 87

Adaptor A1 Adaptor AMPHENOL-MILITARY A1 022.0002.0068 Adaptor A2 Adapter MILITARY-AMPHENOL A2 022.0002.0069 OVERCUT BOX (Generator Protection) single phase TECHNICAL DATA 500Vac ± 15% @ 50-60Hz 32A 100% 21S 210 x 120 x 140mm OVERCUT BOX (Generator Protection) 006.0002.0040 11_2015 88

Gas regulator MANOMETER TECHNICAL DATA GAS Ar - Ar/CO 2 200bar Gas regulator MANOMETER 006.0002.0011 Gas regulator FLOWMETER TECHNICAL DATA GAS Ar - Ar/CO 2 200bar Gas regulator FLOWMETER 006.0002.0005 11_2015 89

Suitcase 01 ABS BLACK TECHNICAL DATA 400 x 370 x 220mm MACHINE Suitcase 01 ABS BLACK 006.0002.0012 Suitcase 02 ABS BLACK TECHNICAL DATA 500 x 400 x 270mm MACHINE Suitcase 02 ABS BLACK 006.0002.0016 Suitcase 03 ABS BLACK (Without Pocket) TECHNICAL DATA 500 x 400 x 270mm MACHINE Suitcase 03 ABS BLACK 006.0002.0039 Kit MMA COMPOSITION MASK Electrode Holder 16mm2 L=3m Earth Cable 16mm2 L=2.5m BRUSH - HAMMER MACHINE KIT MMA 006.0002.0001 11_2015 90

Electrode Holder 16 mm 2 Earth Cable 16 mm 2 TECHNICAL DATA L 3m X% 150A (60%) 200A (35%) Electrode Holder 16mm 2 L= 4m 006.0002.0026 Electrode Holder 35 mm 2 TECHNICAL DATA L 2m X% 150A (60%) 200A (35%) 40mm Earth Cable 16mm 2 L=3m 006.0002.0010 Earth Cable 35 mm 2 TECHNICAL DATA L 4m X% 300A (60%) 400A (35%) Electrode Holder 35mm 2 L= 4m 006.0002.0028 TECHNICAL DATA L 4m X% 300A (60%) 400A (35%) 74mm Earth Cable 35mm 2 L=4m 006.0002.0003 Electrode Holder 70 mm 2 Earth Cable 70 mm 2 TECHNICAL DATA L 4m X% 400A (60%) 500A (35%) Electrode Holder 70mm 2 L= 4m 006.0002.0025 TECHNICAL DATA L 4m X% 400A (60%) 500A (35%) 74mm Earth Cable 70mm 2 L=4m 006.0002.0017 11_2015 91

Torch TIG 17 valve L=4m Torch TIG 26 valve L=4m TECHNICAL DATA X% 140A (35%) DC 125A (35%) AC GAS Argon Torch TIG 17 valve L= 4m 006.0005.0007 Torch TIG 17 L=4m AIR PT TECHNICAL DATA X% 180A (35%) DC 150A (35%) AC GAS Argon Torch TIG 26 valve L= 4m 006.0005.0002 Torch TIG 17 L=4m AIR EURO TECHNICAL DATA X% 140A (35%) DC 100A (35%) AC GAS Argon Torch TIG 17 L=4m AIR PT 006.0005.0001 TECHNICAL DATA X% 140A (35%) DC 125A (35%) AC GAS Argon Torch TIG 17 L= 4m AIR EURO 006.0005.0005 Torch TIG 26 L=4m AIR PT Torch TIG 26 Potentiometer L=4m TECHNICAL DATA X% 180A (35%) DC 150A (35%) AC GAS Argon Torch TIG 26 L=4m AIR PT 006.0005.0004 TECHNICAL DATA X% 180A (35%) DC 130A (35%) AC GAS Argon Torch TIG 26 L=4m AIR Potentiometer 006.0005.0008 11_2015 92

Torch TIG 26 L=4m AIR Up/Down Torch TIG 26 L=4m AIR EURO TECHNICAL DATA X% 180A (35%) DC 150A (35%) AC GAS Argon Torch TIG 26 L=4m AIR Up/Down 006.0005.0009 TECHNICAL DATA X% 180A (35%) DC 150A (35%) AC GAS Argon Torch TIG 26 L= 4m AIR EURO 006.0005.0011 Torch TIG 18 L=4m H2O PT Torch TIG 18 L=4m H2O Potentiometer TECHNICAL DATA X% 320A (35%) DC 270A (35%) AC GAS Argon Torch TIG 18 L=4m H2O PT 006.0005.0006 TECHNICAL DATA X% 320A (35%) DC 270A (35%) AC GAS Argon Torch TIG 18 L=4m H2O Potentiometer 006.0005.0003 Torch TIG 18 L=4m H2O Up/Down TECHNICAL DATA X% 320A (100%) DC 230A (100%) AC GAS Argon Torch TIG 18 L=4m H2O Up/Down 006.0005.0010 11_2015 93

Torch MIG 15 L=3m AIR Torch MIG 25 L=4m AIR TECHNICAL DATA X% 180A (60%) CO2 150A (60%) MIX ø mm Torch MIG 15 L= 3m AIR EURO 006.0008.0002 TECHNICAL DATA X% 230A (60%) CO2 200A (60%) MIX ø mm Torch MIG 25 L= 4m AIR EURO 006.0008.0003 Torch MIG 36 L=4m AIR Torch MIG 240 L=4m H2O TECHNICAL DATA X% 340A (60%) CO2 320A (60%) MIX ø mm Torch MIG 36 L= 4m AIR EURO 006.0008.0004 Torch MIG Digimanager 240 L=4m H2O TECHNICAL DATA X% 300A (100%) CO2 270A (100%) MIX ø mm Torch MIG 240 L= 4m AIR EURO 006.0008.0007 Torch MIG MB 501D L=4m H2O X% ø mm TECHNICAL DATA 300A (100%) CO2 270A (100%) MIX 300A (100%) PULS X% ø mm TECHNICAL DATA 550A (100%) CO2 500A (100%) MIX 325A (100%) PULS Torch MIG MB 240D L=4m Digimanager 006.0008.0017 Torch MIG MB 501D L=4m H2O 006.0008.0006 11_2015 94

Torch MIG Digimanager 501 L=4m H2O Torch MIG Spool Gun Plus 15 L=6m Euro X% ø mm Torch MIG MB 501D L=4m Digimanager TECHNICAL DATA 550A (100%) CO2 500A (100%) MIX 006.0008.0018 325A (100%) PULS TECHNICAL DATA X% 230A (60%) CO2 200A (60%) MIX ø mm Torch MIG SPOOL GUN PLUS 15 L=6m EURO 006.0008.0005 11_2015 95

Kit Upgrading Software Pioneer Pulse / Power Pulse Kit Upgrading Software Pioneer Pulse / Power Pulse 010.0000.0037 11_2015 96

Roll D30 - d14 Roll D30 - d22 30mm 14mm 30mm 22mm ROLL ROLL SG2/SG3 0.6/0.8 D=30 d=14 V 002.0000.0119 0.8/1.0 D=30 d=14 V 002.0000.0120 1.0/1.2 D=30 d=14 V 002.0000.0121 1.2/1.6 D=30 d=14 V 002.0000.0125 SG2/SG3 0.8/1.0 D=30 d=22 V 002.0000.0113 1.0/1.2 D=30 d=22 V 002.0000.0104 1.2/1.6 D=30 d=22 V 002.0000.0105 Al / SS 0.8/1.0 D=30 d=14 U 002.0000.0122 1.0/1.2 D=30 d=14 U 002.0000.0123 1.2/1.6 D=30 d=14 U 002.0000.0126 FCW 1.0/1.2 D=30 d=14 VK 002.0000.0124 1.2/1.6 D=30 d=14 VK 002.0000.0127 MACHINE PIONEER 321MKS - MICROMAG 301 PLUS MICROMAG 302MFK - MICROPULSE 302MFK Roll D37 - d19 Al / SS FCW 002.0000.0131 1.0/1.2 D=30 d=22 U 002.0000.0115 002.0000.0132 002.0000.0133 002.0000.0134 002.0000.0135 MACHINE WF103 Roll D40 - d22 37mm 19mm 40mm 22mm SG2/SG3 Al / SS FCW ROLL 0.6/0.8 D=37 d=19 V 002.0000.0140 0.8/1.0 D=37 d=19 V 002.0000.0141 1.0/1.2 D=37 d=19 V 002.0000.0142 1.2/1.6 D=37 d=19 V 002.0000.0143 0.8/1.0 D=37 d=19 U 002.0000.0144 1.0/1.2 D=37 d=19 U 002.0000.0145 1.2/1.6 D=37 d=19 U 002.0000.0146 1.6/2.0 D=37 d=19 U 002.0000.0147 2.4/3.2 D=37 d=19 U 002.0000.0148 1.0/1.2 D=37 d=19 VK 002.0000.0149 1.2/1.6 D=37 d=19 VK 002.0000.0150 2.4/3.2 D=37 d=19 VK 002.0000.0151 SG2/SG3 Al / SS FCW ROLL 0.6/0.8 D=40 d=22 V 002.0000.0106 0.8/1.0 D=40 d=22 V 002.0000.0109 1.0/1.2 D=40 d=22 V 002.0000.0107 0.8/1.0 D=40 d=22 U 002.0000.0111 1.0/1.2 D=40 d=22 U 002.0000.0112 1.0/1.2 D=40 d=22 VK 002.0000.0114 FLAT D=37 d=19 FLAT 002.0000.0152 MACHINE D=37 d=19 knurled 002.0000.0153 FLAT MACHINE PIONEER 401MKS - PIONEER 321 PULSE - WF104/105/106/107 11_2015 97

WECO srl Via S. Antonio 22 - Loc. Belvedere 36050 Tezze sul Brenta (Vicenza) - Italy Tel +39 0424 561 943 fax +39 0424 561 944 info@weco.it - www.weco.it DISTRIBUTOR