Mechanical Seals. STK Stramek - PDF Free Download

Mechanical Seals www.stramek.com STK Stramek

Index 1 Component Seals Index... Stationary Parts... 1 Conical Spring... Elastomer Bellow... Parallel Spring... 1 Multiple Spring... 7 Wave Spring... PTFE Seals... Water Pump Seal... OEM Seals Index... 7 Pump for General Industry Food, Beverage and Dairy Seals... 7 Cartridge and Engineered Seals Index... 8 Standard Cartridge Seals... 108 Metal Bellow... 1 Dual Seals... 10 Split Seals... 1 Engineered Seals... 18 Mixers Seals... 10 Supply Systems & Components Index... Systems... 1 Heat Exchangers... 1 Separators... 171 Gland Packing Index... 10 Pan Fibre Packings... 17 PTFE... 17 PTFE Graphite... 181 Kevlar Aramid Fibres... 18 Aramid Packings... 187 Carbon Graphite Fibres... 11 Expanded Graphite... 1 Glass Fibre... 1 Natural Fibres... 0 Technical Information Guide... 08 Technical Information... 11 Table of Material... 18

About us STK Stramek Keeping Flow Under Control Stramek is an international brand specialised in the manufacturing and distribution of topoftherange sealing products. Our experienced technical team has a strong track record working with the world s leading companies in all sectors of the industrial spectrum. The success and profitability of your project is our goal. We strive to provide you with the greatest product range in the industrial market, with a guaranteed high quality and reliability, at the shortest possible time. In Stramek, we are highly focussed on providing a top experience to our customers. Our customer service will help you throughout your project, from beginning to end, and our experts will be available to you at any time. We also offer an outstanding Product Repair Service. Technical Advice Our engineering department will assess your needs in order to find the best sealing solution for your project. We propose an integral advice, from the equipment selection and problem solving, up to planning and implementation of the project. Product Range and Stock Availability Stramek offers you the most comprehensive range of mechanical seals and gland packing for every common industry. Moreover, we are keen on reducing our delivery time to a maximum so your production never stops. Quality and Reliability All of our products are manufactured under the highest standards of quality and certifications, in order to ensure that your company s demands are met. Our final objective is customer satisfaction. Product Repair Service We have developed our own repair service which is available for all our models and applications. Our service includes: evaluation, diagnosis, analysis, repairing, manufacturing and testing.

Industrial Applications Stramek offers the best combination of quality, design, materials, automated manufacture and electronic inspection services. About us Oil & Gas The processing of oil and gas is a complex and multistage process. Stramek is playing a key role towards ensuring safety and reliability. Power Generation Sealing systems featuring maximum operational reliability and low leakage rates with environmental protective measures. OEM Stramek s OEM range has been created to provide our distributors the ability to support market demands for maintenance and repair enquiries. General Industry Stramek has the widest range of mechanical seals for general industry, combining advanced technologies with our extensive industry experience. Chemicals The materials used in the chemical industry need to cope with applications involving explosive, toxic or aggressive media. Marine We supply mechanical seals for use in the Marine sector including cruise ships and cargo vessels. Bilge, water and fuel pumps are some typical applications. Food & Cosmetics Stramek mechanical seals have been used for very demanding applications, with great success in sterile processes. Pharmaceuticals In addition to meeting technical requirements a seal has to display many other characteristics in connection with cleanliness, health and general legislation.

Index Component Seals Stationary Parts Pag. 11 Conical Spring Pag. Elastomer Bellow Parallel Spring Pag. 0 Pag. 1 Multiple Spring Pag. 71 Wave Spring Pag. PTFE Seals Water Pump Seals Pag. 8 Pag. 71

O.E.M. Seals Index O.E.M. Seals Page A.B.S. 7 Alfa Laval. 88 Allweiler 7 A.P.V. C.S.F. Inox 1 Ebara 77 Eureka 77 For Compressors 87 Fristam G.E.A. Tuchenhagen 10 Godwin 78 Grundfos 7, 10 Haigh 81 Hidrostal 8 O.E.M. Seals Page Hilge 10 I.M.O. 81 Inoxpa 10 Johnson S.P.X. 10 K.S.B. 8 Lowara 8 National Oilwell 8 Puma SPP 8 Sterling Sihi 8 Tsurumi 8 Viking 8 Wilo 8 7

Cartridge and Engineered Seals Index Standard Cartridge Pag. 1081 Metal Bellow Pag. 11 Dual Seals Pag. 101 Split Seals Pag. 117 Engineered Seals Pag. 181 Engineered Seals Pag. 181 Mixers Seals Pag. 1011 8

Supply Systems & Components Index Systems Pag. 118 Heat Exchangers Pag. 1170 Separators Pag 17117

Index Gland Packing Pan Fibre Packing Pag. 17178 PTFE Pag. 17180 PTFE Graphite Pag. 18118 PTFE Graphite Pag. 18118 Kevlar Aramid Fibres Pag. 1818 Aramid Packings Pag. 18710 10

Gland Packing Index Carbon Graphite Fibres Pag. 111 Expanded Graphite Pag. 118 Glass Fibre Pag. 10 Natural Fibres Pag. 00 11

Component Seals

Stationary Parts F/F Common O Ring mounted stationaries to suit EURODIN housing sizes, designed to provide a wide range of compatability with Stramek rotary seal types. F has an antirotation pin provision and is recomended particularly for larger shaft sizes and / or more viscous media. F is a standard short EURODIN seat with no pin slot. Stramek Frotary seal types. F D D Metric Shaft Size Size Code D F F F SLOT WIDTH F SLOT DEPTH 10 0100 1.00 1..0 10.00.00.00 1 010.00 18..0 10.00.00.00 1 010.00 0..0 10.00.00.00 1 010 7.00..0 10.00.00.00 18 0180.00.0 7.0 11.0.00.0 0 000.00 8.0 7.0 11.0.00.0 00 7.00 0.0 7.0 11.0.00.0 00.00.0 7.0 11.0.00.0 00 0.00.0 7.0 11.0.00.0 8 080.00.0 7.0 11.0.00.0 0 000.00 8.0 7.0 11.0.00.0 00 8.00 1.0 7.0 11.0.00.0 00 8.00 1.0 7.0 11.0.00.0 00 0.00.80 7.0 11.0.00.0 8 080.00 8.80.00 1.00.00.0 0 000 8.00 0.80.00 1.00.00.0 00 1.00.80.00 1.00.00.0 00.00.80.00 1.00.00.0 8 080.00 8.80.00 1.00.00.0 0 000 70.00 1..0 1.00.00.0 00 7.00. 11.00 1.00.00.0 00 7.00. 11.00 1.00.00.0 8 080 78.00. 11.00 1.00.00.0 0 000 80.00 71. 11.00 1.00.00.0 00 8.00 7. 11.00 1.00.00.0 00 8.00 7. 11.00 1.00.00.0 8 080 0.00 80.0 11.0 18.00.00.0 70 0700.00 8.0 11.0 18.00.00.0 7 070 7.00 87.0 11.0 18.00.00.0 80 0800 10.00.70 1.00 18.0.00.0 8 080 110.00.70 1.00 18.0.00.0 0 000 11.00 10.70 1.00 18.0.00.0 00 10.00 10.70 1.00 17.0.00.0 100 1000 1.00 11.70 1.00 17.0.00.0 1

F1DINS/F1DIN Common O Ring mounted stationaries to suit DIN housing sizes, Stationary Parts designed to provide a wide range of compatability with Stramek rotary types. F1DIN has antirotation provision and is recomended particularly for larger shaft sizes and / or more viscous media. F1DINS is a standard short DIN seat with no pin slot. F1DINS F1DIN D D Metric Shaft Size Size Code D F1DIN SLOT WIDTH F1DINS SLOT DEPTH 10 0100 1.00 1. 8.0.00.00 1 010.00 18. 8.0.00.00 1 010.00 0. 8.0.00.00 1 010 7.00. 8.0.00.00 18 0180.00.0 10.00.00.0 0 000.00 8.0 10.00.00.0 00 7.00 0.0 10.00.00.0 00.00.0 10.00.00.0 00 0.00.0 10.00.00.0 8 080.00.0 10.00.00.0 0 000.00 8.0 10.00.00.0 00 8.00 1.0 10.00.00.0 00 8.00 1.0 10.00.00.0 00 0.00.80 10.00.00.0 8 080.00 8.80 11.00.00.0 0 000 8.00 0.80 11.00.00.0 00 1.00.80 11.00.00.0 00.00.80 11.00.00.0 8 080.00 8.80 11.00.00.0 0 000 70.00 1. 1.00.00.0 00 7.00. 1.00.00.0 00 7.00. 1.00.00.0 8 080 78.00. 1.00.00.0 0 000 80.00 71. 1.00.00.0 00 8.00 7. 1.00.00.0 00 8.00 7. 1.00.00.0 8 080 0.00 80.0 1.0.00.0 70 0700.00 8.0 1.0.00.0 7 070 7.00 87.0 1.0.00.0 80 0800 10.00.70 1.70.00.0 8 080 110.00.70 1.70.00.0 0 000 11.00 10.70 1.70.00.0 00 10.00 10.70 1.70.00.0 100 1000 1.00 11.70 1.70.00.0 1

Stationary Parts F/F1/F/FDIN Common Stramek O Ring mounted designs without antirotation provision, to suit common European housing sizes including DIN. These are industry standard seats, commonly speciefed for Conical Spring Seals on general duties. However, consideration should be given to using longstyle seats, with antirotation provision, should the conditions necessitate. Metric Shaft Size Size Code F F1 F FDIN 10 0100 1.0.0 1.0 7.10 18.10.0 1.00 7.00 11 0110 0.0.0 1 010 1.0.0 1.0 7.0 0.0.0.00 7.00 1 010.10.00 1 010.0.0.0 7.0.10.00.00 7.00 1 010.0.0.0 8.0.0 7.00 1 010 8.00 7.0 8.00.00.0 7.00 7.00 7.00 17 0170.0 7.00 18 0180 0.00 8.00 0.00 10.00 0.0 8.00.00 10.00 1 010 1.00 7.0 1.00.00 0.0 8.00 0 000.00 7.0.00.0 0.0 8.00.00 10.00 1 010.0 8.00 00.00 7.0.00.0.0 8.00 7.00 10.00 00.0 8.00 00 8.00 7.0 8.00.0.0 8.00.00 10.00 00 8.00 7.0 8.00.0 8.0 8.0 0.00 10.00 00 0.00 8.00 0.00 10.00 8.0 8.0 8 080.00.00.00 11.00.0.00.00 10.00 0 000.00 10.0.00 11.00.0.00.00 10.00 00 8.00 10.0 8.00 11.00.0.00 8.00 10.00 00 8.00 11.00.0 11.0 8.00 10.00 00.00 11.00.00 11.0.0 11.0 0.00 10.00 8 080.00 10.0.00 11.0 0.0 11.0.00 1.00 0 000 8.00 10.80 8.00 11.0 0.0 11.0 8.00 1.00 00.00 1.00.00 1.0 0.0 11.0 00.00 1.00.00 1.0 0.0 11.0 1.00 1.00 00.0 11.0 00.00 11.0.00 1.0.0 11.0.00 1.00 8 080 8.0 11.0 8.0 1.0.0 11.0.00 1.00 0 000.0 11.0.0 1.0 7.0 11.0 70.00 1.00 00 7.00 1.00 00 7.0 1.0 7.0 1.0 7.0 11.0 7.00 1.00 8 080 78.0 1.0 78.0 1.0 78.00 1.00 0 000 80.0 1.0 80.0 1.0 7.0 11.0 80.00 1.00 00 8.00 1.00 00 8.0 1.00 8.0 1.0 8.0 11.0 8.00 1.00 8 080 1.0 1.70 1.0 1.00 0.00 1.00 70 0700.00 1.00.00 1.0 8.0 11.0.00 1.00 7 070.00 1.00.00 1.0.0 11.0 7.00 1.00 80 0800 10.00 1.00 10.00 1.0.0 11.0 10.00 18.00 8 080 10.00 1.80 10.0 1.0 110.00 18.00 0 000 11.00 1.80 111.0 1.0 11.00 18.00 00 10.0 1.80 11.0 1.0 10.00 18.00 100 1000 1.0 1.80 11.0 1.0 1.00 18.00 1

F1/F1 Stationary Parts O Ring mounted, monolithic H configuration seats, to suit common European housings (F1) or common American (F1) housing dimensions. These seats provide the benefits of both a short fitting length with a rear face pinhole and thus of being able to be pinned throughout the size range. This provides an optional antirotation feature within a seat of short operational length. Imperial Shaft Size Metric Shaft Size Size Code F1 F1 Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.7 10 00 0..0 0. 8.7 0.81 0. 0.1 7. 1 010 1.0 7.7 0. 8.7 0.00 017 1.0 7.7 0. 8.7 1.000.0 0.1 7. 0. 1 018 1.1 0. 0.0 10. 1.0 1.7 0.0 10.8 18 0180 1..1 0.0 10. 0.70 1 011 1..1 0.0 10. 1.7. 0.0 10.8 0 000 1.0.70 0.0 10. 0.87 0 1. 7.0 0.0 10. 1. 7.0 0.0 10. 1.000 0 1. 0.0 0.0 10. 1. 1.8 0.7 11.10 8 080 1.87 7. 0.7 11. 1.1 08 1.87 7. 0.7 11. 1.70. 0.7 11.10 0 000.000 0.80 0.7 11. 1.0 017.000 0.80 0.7 11. 1.87 7. 0.7 11.10 00.1.8 0.7 11. 1.7 0.1.8 0.7 11..000 0.80 0.7 11.10 1.00 8 081.0 7.1 0.7 11..1.8 0.7 11.10 0 000.7 0. 0.7 11. 1. 01.7 0. 0.7 11..7 0. 0.00 1.70 00.00.0 0.7 11. 1.70 0.00.0 0.7 11..00.0 0.00 1.70 1.87 8 07..8 0.7 11...8 0.00 1.70 0 000.70.8 0.1 1.0.000 008.70.8 0.1 1.0.70.8 0.00 1.70 00.87 7.0 0.1 1.0.1 0.87 7.0 0.1 1.0.000 7.0 0. 1.8 00.000 7.0 0.1 1.0.0 071.000 7.0 0.1 1.0.1 7.8 0. 1.8.7 0 00.1 7.8 0.1 1.0.0 8. 0. 1.8.00 0.0 8. 0.1 1.0.7 8.7 0. 1.8 00..08 0. 1.88. 0..08 0. 1.88.7 8.7 0. 1.8.70 70 08.70. 0. 1.88.00 88.0 0. 1.88.87 070.87 8. 0. 1.88.70. 0. 1.88 7 070.000 101.0 0. 1.88.000 07.000 101.0 0. 1.88.87 8. 0. 1.88.1 80 07.7 111.1 0.78 1.88.000 101.0 0.78 1.88.0 08.00 11.0 0.78 1.88.1 10.78 0.78 1.88.7 8 087. 117.8 0.78 1.88.0 107. 0.78 1.88.00 0 088.70 10. 0.78 1.88.7 111.1 0.78 1.88. 01.87 1.8 0.78 1.88.00 11.0 0.78 1.88.70 0.000 17.00 0.78 1.88. 117.8 0.78 1.88.87 08.1 10.17 0.78 1.88.000 100 101.0 1. 0.78 1.88.87 1.8 0.78 1.88 17

Stationary Parts F Monolithic stationary ring, with an O Ring installed in a radial groove outside of the stationary ring. This method of installation allows direct contact between the back of the stationary ring and the pump housing. This design of stationary promotes efficient heat transfer, from the seal faces and the seat ring, to the pump body. Making this seat design ideal for higher temperatures media duties. D Imperial Shaft Size Size Code D SLOT P.C.D. Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.00 017 0. 1.80 0..0 0.11 7.0 0.08.0 0.780 1.80 0. 018 0. 1.8 1. 1. 0.0 10.0 0.08.0 0..0 0.70 011 0.7 0.1 1.71.8 0.0 10.0 0.08.0 1.0 7.7 0.87 0 0.1. 1. 8.00 0.0 10.0 0.08.0 1.0 1.00 1.000 0 1.0.0 1.1 1.18 0. 11.1 0.08.0 1..10 1.1 08 1.18 0.08 1.7. 0. 11.1 0.08.0 1. 7.0 1.0 017 1.0. 1.871 7. 0. 11.1 0.08.0 1. 0.0 1.7 0 1.. 1. 0.70 0. 11.1 0.08.0 1.717.0 1.00 081 1..0.11.88 0. 11.1 0.08.0 1.8.80 1. 01 1.8.78.71 0. 0.0 1.7 0.118.00.01 1.0 1.70 0 1.80...0 0.0 1.7 0.118.00.17.80 1.87 07 1..1.1.8 0.0 1.7 0.118.00.80 7.0.000 008.0.0.7.7 0.0 1.7 0.118.00.0 1.10.1 0.18.8. 7.10 0. 1. 0.18.0..0.0 071.0 8..11 7.8 0. 1. 0.18.0.717.00.7 00. 1.8. 8. 0. 1. 0.18.0.8 7.0.00 0..00.71 8. 0. 1. 0.18.0. 7.0. 0.8 8.18.71 8. 0.7 1. 0.18.0.01 77.00.70 08.80 71.. 88.80 0.7 1. 0.18.0.17 80.0.87 070. 7..7.1 0.7 1. 0.18.0. 8.0.000 07.0 77.70.871 8. 0.7 1. 0.18.0. 88.10.1 07. 81.. 101.0 0.781 1.8 0.18.0. 1.0.0 08.0 8.10.11 10.8 0.781 1.8 0.18.0.717.0.7 087.7 88.7. 107.8 0.781 1.8 0.18.0.8 7.0.00 088.00 1..71 111.0 0.781 1.8 0.18.0. 100.80. 01.7.. 11.0 0.781 1.8 0.18.0.0 10.00.70 0.80 7.7.1 117.8 0.781 1.8 0.18.0.17 107.10.87 08.7 100.7.7 10. 0.781 1.8 0.18.0. 110.0.000 101.100 10.1.871 1.7 0.781 1.8 0.18.0. 11.0 18

FPT Stationary Parts L Shaped P.T.F.E. bootmounted stationary, to suit common American housing sizes. Due to the lowfriction nature of P.T.F.E., this stationary seat has necessarily been designed with an antirotation provision, and it is recommended to ensure this is utilised. Widely utilised in chemical process equipment, due to the exceptional chemical resistance that can be provided. D Imperial Shaft Size Size Code D PIN P.C.D. PIN Ø Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.70 011 1.7. 0.7 0.1 0.0 10.8 0.7.81 0.07.00 0.87 0 1.00 8.10 0.1. 0.0 10.8 1.0. 0.07.00 1.000 0 1. 1.8 1.0.0 0.7 11.10 1.187 0.1 0.07.00 1.1 08 1.70. 1.18 0.08 0.7 11.10 1.1. 0.07.00 1.0 017 1.87 7. 1.0. 0.7 11.10 1.7.0 0.07.00 1.7 0.000 0.80 1.. 0.7 11.10 1..70 0.07.00 1.00 081.1.8 1..0 0.7 11.10 1.87.8 0.07.00 1. 01.7 0. 1.8.78 0.00 1.70 1.87 7. 0.118.00 1.70 0.00.0 1.80. 0.00 1.70.000 0.80 0.118.00 1.87 07..8 1..1 0.00 1.70.1.8 0.118.00.000 008.70.8.0.0 0.00 1.70.0 7.1 0.118.00.1 0.000 7.0.18.8 0. 1.8.7 0. 0.118.00.0 071.1 7.8.0 8. 0. 1.8.00.0 0.118.00.7 00.0 8..8 1. 0. 1.8..8 0.118.00.00 0.7 8.7..00 0. 1.8.70.8 0.118.00. 0.7 8.7.8 8.18 0. 1.88.87 7.0 0.118.00.70 08.00 88.0.80 71. 0. 1.88.000 7.0 0.118.00.87 070.70.. 7. 0. 1.88.1 7.8 0.118.00.000 07.87 8..0 77.70 0. 1.88.0 8. 0.118.00 1

Stationary Parts FC/0/0/ Common Stramek bootmounted stationary designs, to fit and suit a variety of international housing and working length standards. Bootmounted seats offer optimum cost and performance benefits. The ribbed profile and increased elastomer contact area with the housing is often preferred. Please specify the actual shaft size code required when ordering, as a seat separate to the seal, as each size has a unique I.D. Imperial Shaft Size Metric Shaft Size Size Code FC FC0 Imperial Metric Imperial Metric Imperial Metric Imperial Metric FC0 FC 0.7 00 0.87. 0.1 7. 0..0 0. 8.7 10 0100 0.87. 0.1 7. 0..0 0. 8.7 1.00.0 1.00 8.0 1 010 1.000.0 0.1 7. 1.0 7.7 0. 8.7.00.0.00 8.0 0.00 017 1.000.0 0.1 7. 1.0 7.7 0. 8.7 1 010 1.000.0 0.1 7. 1.0 7.7 0. 8.7 1 010 1.0 1.7 0.0 10.8 1.1 0. 0.0 10..00.0.00 8.0 1 010 1.1 0. 0.0 10. 7.00.0 7.00 8.0 0. 018 1.0 1.7 0.0 10.8 1.1 0. 0.0 10. 1 010 1.0 1.7 0.0 10.8 1.1 0. 0.0 10. 7.00.0 7.00 8.0 18 0180 1.7. 0.0 10.8 1..1 0.0 10..00 7.0.00 10.00 0.70 011 1.7. 0.0 10.8 1..1 0.0 10. 0 000 1.00 8.10 0.0 10.8 1.0.70 0.0 10..00 7.0.00 10.00 00 1.00 8.10 0.0 10.8 1. 7.0 0.0 10. 7.00 7.0 7.00 10.00 0.87 0 1.00 8.10 0.0 10.8 1. 7.0 0.0 10. 00 1. 1.8 0.7 11.10 1. 0.0 0.0 10..00 7.0.00 10.00 00 1. 1.8 0.7 11.10 1. 0.0 0.0 10. 0.00 7.0 0.00 10.00 1.000 0 1. 1.8 0.7 11.10 1. 0.0 0.0 10. 8 080 1.70. 0.7 11.10 1.87 7. 0.7 11..00 7.0.00 10.00 1.1 08 1.70. 0.7 11.10 1.87 7. 0.7 11. 0 000 1.87 7. 0.7 11.10.000 0.80 0.7 11..00 7.0.00 10.00 1.0 017 1.87 7. 0.7 11.10.000 0.80 0.7 11. 00 1.87 7. 0.7 11.10.000 0.80 0.7 11. 8.00 7.0 8.00 10.00 00 1.87 7. 0.7 11.10.1.8 0.7 11. 8.00 7.0 8.00 10.00 1.7 00.000 0.80 0.7 11.10.1.8 0.7 11. 0.00 7.0 0.00 10.00 1.00 8 080.1.8 0.7 11.10.0 7.1 0.7 11..00 7.0.00 11.00 0 000.7 0. 0.00 1.70.7 0. 0.7 11. 8.00.00 8.00 11.00 1. 01.7 0. 0.00 1.70.7 0. 0.7 11. 00.00.0 0.00 1.70.00.0 0.7 11. 1.00.00 1.00 11.00 1.70 0.00.0 0.00 1.70.00.0 0.7 11. 00..8 0.00 1.70.00.0 0.7 11..00.00.00 11.00 1.87 07..8 0.00 1.70..8 0.7 11. 8 080.70.8 0.00 1.70..8 0.7 11..00.00.00 11.00 0 000.70.8 0.00 1.70.70.8 0.1 1.0 70.00.0 70.00 1.00.000 008.70.8 0.00 1.70.70.8 0.1 1.0 00.000 7.0 0. 1.8.000 7.0 0.1 1.0 7.00 11.00 7.00 1.00.1 0.000 7.0 0. 1.8.87 7.0 0.1 1.0 00.1 7.8 0. 1.8.1 7.8 0.1 1.0 7.00 11.00 7.00 1.00.0 071.1 7.8 0. 1.8.000 7.0 0.1 1.0 8 080.0 8. 0. 1.8.1 7.8 0.1 1.0 78.00 11.00 78.00 1.00 0 000.0 8. 0. 1.8.1 7.8 0.1 1.0 80.00 11.00 80.00 1.00.7 00.0 8. 0. 1.8.1 7.8 0.1 1.0 00.7 8.7 0. 1.8.0 8. 0.1 1.0 8.00 1.00.00 0.7 8.7 0. 1.8.0 8. 0.1 1.0 00.7 8.7 0. 1.88..08 0. 1.88 8.00 11.00 8.00 1.00. 0.7 8.7 0. 1.88..08 0. 1.88.70 08.00 88.0 0. 1.88.70. 0. 1.88 70 0700.00 88.0 0. 1.88.70. 0. 1.88.00 11.0.00 1.0.87 070.70. 0. 1.88.87 8. 0. 1.88 7 070.87 8. 0. 1.88.000 101.0 0. 1.88 7.00 11.0 7.00 1.0.000 07.87 8. 0. 1.88.000 101.0 0. 1.88.1 07.000 101.0 0.78 1.88.7 111.1 0.78 1.88 80 0800.00 11.0 0.78 1.88 10.00 1.00 10.00 1.70.0 08.1 10.78 0.78 1.88.00 11.0 0.78 1.88 8 080. 117.8 0.78 1.88 110.00 1.00 110.00 1.70.7 087.0 107. 0.78 1.88. 117.8 0.78 1.88.00 088.7 111.1 0.78 1.88.70 10. 0.78 1.88 0 000.87 1.8 0.78 1.88 11.00 1.00 11.00 1.70. 01.00 11.0 0.78 1.88.87 1.8 0.78 1.88 00.000 17.00 0.78 1.88 10.00 1.00 10.00 1.70.70 0. 117.8 0.78 1.88.000 17.00 0.78 1.88.87 08.70 10. 0.78 1.88.1 10.17 0.78 1.88 100 1000.0 1. 0.78 1.88 1.00 1.00 1.00 1.70.000 101.87 1.8 0.78 1.88.0 1. 0.78 1.88 0

FT Stationary Parts FT stationary is an industry standard design with a T shaped profile. Supplied complete with two P.T.F.E. flat gaskets, for clamping as illustrated. FT is designed for medias that are aggressive towards elastomers, and is widely utilised with STK MS0/MS/MS series multispring rotaries. D Imperial Shaft Size Metric Shaft Size Size Code D Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.00 1 017 1.1.0 0. 1.70 1..70 0.8 17.0 0.11 7.0 1 010 1. 1.0 0.0 1.00 1.1 1.00 0.8 17.0 0.11 7.0 0. 1 018 1.01.0 0.1 1.80 1.70. 0.8 17.0 0.11 7.0 0.70 1 011 1..1 0.787 0.00 1.81.0 0.8 17.0 0.11 7.0 0 000 1..0 0.87 1.00 1.80 7.00 0.8 17.0 0.11 7.0 0.87 0 1.1. 0.1.0 1..0 0.8 17.0 0.11 7.0 1.000 0 1.7. 1.0.0.07.0 0.8 17.0 0.11 7.0 1.1 8 08 1.801.7 1.1.0.0 8.0 1.0.0 0.7 11.10 0 000 1.17 8. 1.0 1.00.1 8.7 1.0.0 0.7 11.10 1.0 017 1.88 0.0 1.87.70.00.0 1.0.0 0.7 11.10 00.0.0 1..00..00 1.0.0 0.7 11.10 1.7 0.11.8 1.17.00.7.0 1.0.0 0.7 11.10 1.00 8 081.8.8 1..10.7.0 1.0.0 0.7 11.10 0 000.7 1.0 1.1 1.00. 7.00 1.0.0 0.7 11.10 1. 01.88.0 1.1.0.01 7.0 1.0.0 0.7 11.10 1.70 0.1.8 1.787.0.10 7.0 1.0.0 0.7 11.10 00..0 1.811.00.10 80.00 1.0.0 0.7 11.10 1.87 8 07.78. 1..00.8 8.0 1.0.0 0.7 11.10 0 000.81 71.0.008 1.00. 8.00 1.0.0 0.7 11.10.000 008.8 7.7.0 1.80. 8.0 1.0.0 0.7 11.10.1 0.11 7.08.11.0.70.0 1.1. 0. 1.0 00.1 7.0.0.00.780.00 1.1. 0. 1.0.0 071.8 8..87 8.10.878 8.0 1.1. 0. 1.0 0 000. 8.0.0 1.00.7 101.00 1.1. 0. 1.0.7 00. 8..1 1.0. 101.0 1.1. 0. 1.0.00 0.88 88.0..0.11 10.0 1.1. 0. 1.0 00. 8.0.8.00.17 10.00 1.1. 0. 1.0. 0.1 1.78.1 7.0.7 108.0 1.1. 0. 1.0.70 70 08.7.0.7 71.00.70 111.00 1.1. 0. 1.0.87 070.8 8.1.1 7.00.08 11.0 1.1. 0. 1.0 7 070..0. 7.00.7 11.00 1.1. 0. 1.0.000 07..71.0 77.0.7 11.0 1.1. 0. 1.0.1 07.01 10.8.1 80.0.70 11.0 1.1. 0. 1.0 80 0800.10 10.0.18 81.00.7 11.00 1.1. 0. 1.0.0 08. 107.0. 8.70.8 1.0 1.0.0 0. 1.0 8 080.7 10.0.8 8.00.1 1.00 1.0.0 0. 1.0.7 087. 110.8.1 8.0.00 17.0 1.0.0 0. 1.0.00 088.88 11.00. 8.0.18 10.0 1.0.0 0. 1.0 0 000.08 11.0.8 1.00.18 10.0 1.0.0 0. 1.0. 01.10 117.10.7.0. 1.0 1.0.0 0. 1.0 00.70 11.0.780.00. 1.00 1.0.0 0. 1.0.70 0.78 10..71.0.7 1.0 1.0.0 0. 1.0 100 1000.17 1.0.7 101.00.1 11.00 1.0.0 0. 1.0.000 101.88 1.70.0 10.0.10 1.0 1.0.0 0. 1.0.0 107.8 1.0.1 10.00.88 1.0 1.0.0 0. 1.0.00 11.88 1.0. 11.0.1 1.0 1.0.0 0. 1.0.000 170.88 1.80.0 18.00 7.8 187.0 1.17.00 0.0 1.00.00 17.88 177.0. 10.70 7.8 00.0 1.17.00 0.0 1.00 1

Conical Spring CS Characteristics Unbalanced Mechanical Seal. Dependent on direction of rotation. Conical spring mechanical seal with ORing in rotating and stationary parts. Operating Limits p: <11 Bar ; V: <1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code 10 0100 18.10 1.00 1.00.0 1 010 0.0 1.00 18.00.0 1 010.10.00.00.00 1 010.10.00.00.00 1 010.0.00.00 7.00 1 010.0.00.00 7.00 17 0170.0.00.00 7.00 18 0180 0.0.00.00 8.00 1 010 0.0 1.00.00 8.00 0 000 0.0 1.00.00 8.00 00.0.00.00 8.00 00.0.00 7.00 8.00 00 8.0.00 7.00 8.0 00 8.0.00 7.00 8.0 8 080.0 0.00.00.00 0 000.0.00 0.00.00 00.0.00 0.00.00 00.0.00.00 11.0 00.0.00.00 11.0 00.0.00.00 11.0 8 080 0.0.00.00 11.0 00 0.0.00.00 11.0 0 000 0.0.00.00 11.0 00 0.0.00.00 11.0 00 0.0.00.00 11.0 00.0 1.00 1.00 11.0 00.0 1.00 1.00 11.0 8 080.0.00 1.00 11.0 0 000 7.0.00.00 11.0 00 7.0 71.00 7.00 11.0 0 000 7.0 78.00.00 11.0 00 8.0 8.00 1.00 11.0 70 0700 8.0 8.0 1.00 11.0 7 070.0 8.00 7.00 11.0 80 0800.0 100.00.00 11.0 8 080 10.0 107.0.00 1.0 0 000 111.0 111.00.00 1.0 00 11.0 11.00.00 1.0 100 1000 11.0 1.80 7.00 1.0

CSDIN/CS Characteristics Conical Spring Unbalanced Mechanical Seal. Dependent on direction of rotation. (STK CSDIN) Conical spring mechanical seal with ORing in rotating and stationary parts. STK CSDIN according to DIN, while STK D CS working lengths meet DIN K. Metric Shaft Size Operating Limits p: <11 Bar ; V: <1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Size Code STK CSDIN STK CS L 10 0100 1.00 1.00 1.00.0 7.00 1 010.00 1.00 18.00.0 7.00 1 010.00.00.00 8.00 7.00 1 010 7.00.00.00 8.00 7.00 18 0180.00.00.00 7.0 10.00 0 000.00 1.00.00 7.0 10.00 00 7.00.00.00 7.0 10.00 00.00.00 7.00 0.00 10.00 00 0.00.00 7.00 0.00 10.00 8 080.00 0.00.00.0 10.00 0 000.00.00 0.00.0 10.00 00 8.00.00 0.00.0 10.00 00 8.00.00.00.0 10.00 00 0.00.00.00.0 10.00 8 080.00.00.00.00 1.00 0 000 8.00.00.00.00 1.00 00 1.00.00 7.00.00 1.00 00.00 1.00 7.00.00 1.00 8 080.00.00 7.00.00 1.00 0 000 70.00.00.00.0 1.00 00 7.00.00.00.0 1.00 00 7.00 71.00.00.0 1.00 8 080 78.00 7.00.00 8.0 1.00 0 000 80.00 78.00.00 8.0 1.00 00 8.00 81.00.00 N/A 1.00 00 8.00 8.00.00 8.0 1.00 8 080 0.00 88.00.00 N/A 1.00 70 0700.00 8.0.00.00 1.00 7 070 7.00 8.00.00.00 1.00 80 0800 10.00 100.00 7.00.00 18.00 8 080 110.00 107.0 7.00.00 18.00 0 000 11.00 111.00 7.00 7.00 18.00 00 10.00 11.00 7.00 7.00 18.00 100 1000 1.00 1.80 7.00 7.00 18.00

Conical Spring CS Characteristics Unbalanced Mechanical Seal. Dependent on direction of rotation. Conical spring mechanical seal with ORing in rotating and stationary parts. Interchangeable seal faces. Operating Limits p: <10 Bar ; V: <1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code 10 0100 18.10 1.0 1.00.0 11 0110 0.0.00 18.00.0 1 010 0.0.00 18.00.0 1 010.10.00.00.00 1 010.10.00.00.00 1 010.0.00.00 7.00 1 010.0.00.00 7.00 17 0170.0.00.00 7.00 18 0180 0.0.00.00 8.00 1 010 0.0.70.00 8.00 0 000 0.0.70.00 8.00 1 010.0.00.00 8.00 00.0.00.00 8.00 00.0.00 7.00 8.00 00.0 7.0 7.00 8.00 00 8.0 8.00 7.00 8.0 8 080.0.00.00.00 0 000.0.00 0.00.00 00.0.0 0.00.00 00.0.0.00 11.0 00.0.00.00 11.0 8 080 0.0.00.00 11.0 0 000 0.0 8.00.00 11.0

Characteristics CSDIN Conical Spring Unbalanced Mechanical Seal. Dependent on direction of rotation. Conical spring mechanical seal with ORing in rotating and stationary parts. Interchangeable seal faces. According to DIN. Operating Limits p: <10 Bar ; V: <1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code 10 0100 1.00 1.0 1.00 7.00 1 010.00.00 18.00 7.00 1 010.00.00.00 7.00 1 010 7.00.00.00 7.00 18 0180.00.00.00 10.00 0 000.00.70.00 10.00 00 7.00.00.00 10.00 00.00 7.0 7.00 10.00 00 0.00 8.00 7.00 10.00 8 080.00.00.00 10.00 0 000.00.00 0.00 10.00 00 8.00.0 0.00 10.00 00 8.00.0.00 10.00 00 0.00.00.00 10.00 8 080.00.00.00 1.00 0 000 8.00 8.00.00 1.00

Conical Spring CS8 Characteristics Unbalanced Mechanical Seal. Dependent on direction of rotation. Conical spring mechanical seal with ORing in rotating and stationary parts. Operating Limits p: <1 Bar ; V: <1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code 10 0100 1.0 1.00 1.0.0 1 010 1.0 1.00 1.0.0 1 010.0.00 1.0.0 1 010.0.00 1.0.0 1 010 8.00.00 17.0 7.0 18 0180 0.00.00 18.0 8.00 1 010 1.00 1.00 0.00 7.0 0 000.00 1.00 0.00 7.0 00.00.00 1.0 7.0 00 8.00.00.00 7.0 00 8.00.00.0 7.0 00 0.00 7.00.0 8.00 8 080.00 0.00.0.00 0 000.00.00.0 10.0 00 8.00.00 8.00 10.0 00 8.00.00 8.00 11.00 00.00.00 8.00 11.00 8 080.00.00 1.00 10.0 0 000 8.00.00.00 10.80 00.00.00.00 1.00 00.00.00.00 1.00 00.00 1.00.0 11.0 8 080 8.0.00.00 11.0 0 000.0.00.00 11.0 00 7.0 71.00 7.00 1.0 8 080 78.0 7.00 0.00 1.0 0 000 80.0 78.00 1.00 1.0 00 8.0 8.00.00 1.00 70 0700.00 0.00.00 1.00 7 070.00 8.00.00 1.00 80 0800 10.00 100.00 8.00 1.00

CS8DIN/CS8DINS Characteristics Conical Spring Unbalanced Mechanical Seal. Dependent on direction of rotation. (DIN) Conical spring mechanical seal with ORing in rotating and stationary parts. L(DINS) Operating Limits p: <1 Bar ; V: <1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code CS8DIN SEAT CS8DINS SEAT L CS8DIN SLOT WIDTH CS8DIN SLOT DEPTH 10 0100 1.00 1.00 1.0 10.00.0.00.00 1 010.00 1.00 1.00 10.00.0.00.00 1 010.00.00 1.0 10.00.0.00.00 1 010 7.00.00 18.00 10.00.0.00.00 18 0180.00.00 1.0 11.0 7.0.00.0 0 000.00 1.00.00 11.0 7.0.00.0 00 7.00.00 1.0 11.0 7.0.00.0 00.00.00.0 11.0 7.0.00.0 00 0.00.00.0 11.0 7.0.00.0 8 080.00 0.00.0 11.0 7.0.00.0 0 000.00.00.0 11.0 7.0.00.0 00 8.00.00 8.0 11.0 7.0.00.0 00 8.00.00 8.0 11.0 7.0.00.0 00 0.00.00 8.0 11.0 7.0.00.0 8 080.00.00.0 1.00.00.00.0 0 000 8.00.00.00 1.00.00.00.0 00 1.00.00 8.0 1.00.00.00.0 00.00 1.00.0 1.00.00.00.0 8 080.00.00.00 1.00.00.00.0 0 000 70.00.00.00 1.00.0.00.0 00 7.00.00 7.00 1.00 11.00.00.0 00 7.00 71.00.00 1.00 11.00.00.0 8 080 78.00 7.00.00 1.00 11.00.00.0 0 000 80.00 78.00.00 1.00 11.00.00.0 00 8.00 81.00.00 1.00 11.00.00.0 00 8.00 8.00.00 1.00 11.00.00.0 8 080 0.00 88.00.00 18.00 11.0.00.0 70 0700.00 0.00 7.00 18.00 11.0.00.0 7 070 7.00 8.00.00 18.00 11.0.00.0 80 0800 10.00 100.00 1.80 18.0 1.00.00.0 7

Conical Spring CS8 Characteristics Balanced Mechanical Seal. Conical spring mechanical seal with ORing in rotating and Dependent on direction of rotation. stationary parts. Operating Limits p: <1 Bar ; V: <0 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Seal Size Code Seat Size Code SLOT WIDTH SLOT DEPTH 1 010 010.00.00.0 10.00.00.00 18 0180 010.00.00.0 10.00.00.00 0 000 010 7.00 1.00 1.00 10.00.00.00 00 0180.00.00.0 11.0.00.0 00 000.00.00.0 11.0.00.0 8 080 00.00 0.00.0 11.0.00.0 0 000 00 0.00.00.0 11.0.00.0 00 080.00.00.0 11.0.00.0 00 000.00.00.0 11.0.00.0 8 080 00 8.00.00.0 11.0.00.0 0 000 00 0.00.00.0 11.0.00.0 00 080.00.00.00 1.00.00.0 00 000 8.00 1.00 8.00 1.00.00.0 0 000 00.00.00.00 1.00.00.0 00 080.00.00.00 1.00.00.0 00 000 70.00 71.00 8.00 1.00.00.0 0 000 00 7.00 78.00 0.00 1.00.00.0 00 080 78.00 81.00 0.00 1.00.00.0 00 000 80.00 8.00 0.00 1.00.00.0 70 0700 00 8.00 0.00 1.00 1.00.00.0 7 070 0700.00 8.00.00 18.00.00.0 80 0800 070 7.00 100.00 8.00 18.00.00.0 8 080 0800 10.00 107.0 8.00 18.00.00.0 8

Characteristics CS7D Conical Spring Balanced Mechanical Seal. Dependent on direction of rotation. Conical spring mechanical seal with ORing in rotating and stationary parts. Operating Limits p: <1 Bar ; V: <1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code 1 010.00 1.00 18.00 7.00 1 010.00.00.00 7.00 1 010 7.00.00.00 7.00 18 0180.00.00.00 10.00 0 000.00 1.00.00 10.00 00 7.00.00.00 10.00 00.00.00 7.00 10.00 00 0.00.00 7.00 10.00 8 080.00 0.00.00 10.00 0 000.00.00 0.00 10.00 00 8.00.00 0.00 10.00 00 8.00.00.00 10.00 00 0.00.00.00 10.00 8 080.00.00.00 1.00 0 000 8.00.00.00 1.00 00 1.00.00 7.00 1.00 00.00 1.00 7.00 1.00 0 000 70.00.00.00 1.00 00 7.00 71.00.00 1.00 8 080 78.00 7.00.00 1.00 0 000 80.00 78.00.00 1.00 00 8.00 81.00.00 1.00 00 8.00 8.00.00 1.00 8 080 0.00 88.00.00 1.00 70 0700.00 8.0.00 1.00 7 070 7.00 8.00.00 1.00 80 0800 10.00 100.00 7.00 18.00 8 080 110.00 107.0 7.00 18.00 0 000 11.00 111.00 7.00 18.00 00 10.00 11.00 7.00 18.00 100 1000 1.00 1.80 7.00 18.00

Conical Spring CS Characteristics Unbalanced Mechanical Seal. Conical spring mechanical seal with a monolithic rotatory head. Dependent on direction of rotation. This provides enhanced heat dissipation away from the seal faces. Operating Limits p: <11 Bar ; V: <1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code 10 0100 1.0 0.00 1.0.0 1 010 1.0.00 1.00.0 1 010.0.00 1.00.0 1 010.0 7.00 17.0.0 1 010 8.00 7.00 1.00 7.0 18 0180 0.00 0.00 0.0 8.00 0 000.00.00.00 7.0 00.00.00.0 7.0 00 8.00 8.00.00 7.0 00 8.00 0.00.0 7.0 8 080.00.00.0.00 0 000.00.00.00 10.0 00 8.00 7.00 8.0 10.0 00.00 0.00 8.0 11.00 8 080.00.00.00 10.0 0

Characteristics CSEB Conical Spring Unbalanced Mechanical Seal. Independent on direction of rotation. Conical spring mechanical seal with rubber bellow in the rotating part. Available in different sizes and lengths. Operating Limits p: <10 Bar ; V: <10 m/s t: 0 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code 10 0100 1.00 1.00.0.0 1 010.00.00.0.0 1 010.00.80 8.0.0 1 010 7.00 7.80 8.0.0 18 0180.00.0 0.00 7.0 0 000.00 1.0 0.00 7.0 00 7.00.0 0.00 7.0 00.00.00.0 7.0 00 0.00.00.0 7.0 8 080.00.0.00 7.0 0 000.00.0.00 7.0 00 8.00.70.00 7.0 00 8.00 8.70.00 7.0 00 0.00 8.70.00 7.0 8 080.00.70.00.00 0 000 8.00.10.00.00 00 1.00 0.0.00.00 00.00 0.0.00.00 8 080.00.0.00.00 0 000 70.00.0 8.00.0 00 7.00 70.0.0 11.00 00 7.00 70.0.0 11.00 8 080 78.00 7.0 1.0 11.00 0 000 80.00 7.0 1.0 11.00 00 8.00 8.00 1.0 11.00 00 8.00 8.10 1.0 11.00 8 080 0.00 87.00 1.0 11.0 70 0700.00 8.0 8.70 11.0 7 070 7.00.10 8.70 11.0 80 0800 10.00 10.10 8.00 1.00 0 000 11.00 111.0 1.00 1.00 100 01000 1.00 1.0 1.00 1.00 1

Conical Spring CS8B Characteristics Balanced Mechanical Seal. Dependent on direction of rotation. Conical spring mechanical seal with ORing in rotating and stationary parts. Operating Limits p: <1 Bar ; V: <1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code 10 0100 1.0 1.00 1.0 7.10 1 010 1.0 1.00 1.0 7.0 1 010.0.00 1.0 7.0 1 010.0.00 1.0 8.0 1 010 8.00.00 17.0.00 18 0180 0.00.00 18.0 10.00 1 010 1.00 1.00 0.00.00 0 000.00 1.00 0.00.0 00.00.00 1.0.0 00 8.00.00.00.0 00 8.00.00.0.0 00 0.00 7.00.0 10.00 8 080.00 0.00.0 11.00 0 000.00.00.0 11.00 00 8.00.00 8.00 11.00 00.00.00 8.00 11.0 8 080.00.00 1.00 11.0 0 000 8.00.00.00 11.0 00.00.00.00 1.0 00.00.00.00 1.0 00.00 1.00.0 1.0 8 080 8.0.00.00 1.0 0 000.0.00.00 1.0 00 7.0 7.00 7.00 1.0 0 000 80.0 78.00 1.00 1.0 00 8.0 8.00.00 1.0 8 080 1.0 88.00.00 1.00 70 0700.00 0.00.00 1.0 7 070.00 8.00.00 1.0 80 0800 10.00 100.00 8.00 1.0

Characteristics Unbalanced Mechanical Seal. EBG1E Elastomer Bellow Independent on direction of rotation. Elastomeric bellow mechanical seal of great resistance. DIN profiled bellow seal to suit common European working length and housing sizes. Operating Limits p: <1 Bar ; V: <1 m/s t: 0 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Metric Shaft Size Size Code 1 010 7.7.00.0 8.7 0.00 017 7.7.00.0 8.7 1 010 7.7.00.0 8.7 1 010 0..00.0 10. 1 010 0..00.0 10. 0. 018 0..00.0 10. 1 010 0..00.0 10. 18 0180.1.00.0 10. 0.70 011.1.00.0 10. 0 000.70.00.0 10. 00 7.0.00.0 10. 0.87 0 7.0.00.0 10. 00 0.0 8.00.0 10. 00 0.0.00.0 10. 1.000 0 0.0.00.0 10. 8 080 7..00. 11. 1.1 08 7..00. 11. 0 000 0.80.00. 11. 1.0 017 0.80.00. 11. 00 0.80.00. 11. 00.8 7.00. 11. 1.7 0.8.00. 11. 00.8.00. 11. 8 080 7.1.00. 11. 1.00 081 7.1.00. 11. 0 000 0..00. 11. 1. 01 0..00. 11. 00.0.00 0.8 11. 00.0 1.00 0.8 11. 1.70 0.0 1.00 0.8 11. 00.0 1.00 0.8 11. 1.87 07.8.00 0.8 11. 8 080.8.00 0.8 11. 0 000.8.70 0.8 1.0.000 008.8.70 0.8 1.0 00 7.0.00 0.8 1.0.1 0 7.0.00 0.8 1.0 00 7.0 71.0 0.8 1.0.0 071 7.0 78.00 0.8 1.0 8 080 7.8 78.00 0.8 1.0 0 000 7.8 80.00 0.8 1.0.7 00 7.8 80.00 0.8 1.0.00 0 8. 8.00 0.8 1.0 00.08 8.00.1 1.0. 0.08 8.00.1 1.88.70 08. 0.00.1 1.88 70 0700. 0.00.1 1.88.87 070 8..00.1 1.88 7 070 101.0.00.1 1.88.000 07 101.0.00.1 1.88

Elastomer Bellow EBG1S/1S/1S Characteristics Unbalanced Mechanical Seal. Independent on direction of rotation. Robust bellow seal with nondin crosssection, available in three standard DIN working lengths and with stationaries to suit all common European housing sizes. Operating Limits Metric Shaft Size Size Code STK EBG1S STK EBG1S STK EBG1S p: <1 Bar ; V: <1 m/s t: 0 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. EBG1S SEAL + SEAT K EBG1S SEAL + SEAT N 10 0100 1.00 0.00 1.0.0.0.0.0 0.00 1 010.00.0 1.00.0.0.0.0 0.00 1 010.00 8.0 17.00 8.0.0.0.00 0.00 1 010 7.00 8.0 17.00 8.0.0.0.00 0.00 1 010 7.00 8.0 17.00 8.0.0.0.00 0.00 18 0180.00 1.00 1.0 0.00 7.0 7.0 7.0.00 0 000.00.0 1.0 0.00 7.0 7.0 7.0.00 00 7.00.0 1.0 0.00 7.0 7.0 7.0.00 00.00 1.10.0.0.0 7.0 0.00 0.00 00 0.00 1.10.00.0.0 7.0 0.00 0.00 8 080.00 7.0.0.00.0 7.0.0 0.00 0 000.00 7.0.0.00.0 7.0.0 0.00 00 8.00 1.00 7.0.00 7.0 7.0.0.00 00 8.00 1.00 7.0.00 7.0 7.0.0.00 00 0.00.0 8.0.00 7.0 7.0.0.00 8 080.00 7.0 0.00.00.00.00.00.00 0 000 8.00 0.00 0.00.00.00.00.00.00 00 1.00.80 0.00.00 1.00.00.00 0.00 00.00.70 0.00.00 1.00.00.00 0.00 8 080.00.0 0.0.00 1.00.00.00 0.00 0 000 70.00 71.80 0.0 8.00 0.0.0 7.0 0.00 00 7.00 7.00.00.0.00 11.00 7.0 70.00 00 7.00 78.0.00.0.00 11.00 7.0 70.00 8 080 78.00 8.0 7.00 1.0.00 11.00.0 70.00 0 000 80.00 8.0 8.00 1.0.00 11.00.0 70.00 00 8.00 0.0 0.00 1.0.00 11.00.0 80.00 8 080 0.00.00 0.00 1.0 8.70 11.0.0 80.00 70 0700.00 7.00 0.00 8.70 8.70 11.0 0.00 80.00 7 070 7.00 10.00 0.00 8.70 8.70 11.0 0.00 80.00 80 0800 10.00 10.0 0.00 8.00 78.00 1.00 0.00 0.00 8 080 110.00 11.70 1.00.00 7.00 1.00 0.00 0.00 0 000 11.00 1.0.00 1.00 7.00 1.00.00 0.00 00 10.00 17.0.00 1.00 7.00 1.00.00 0.00 100 01000 1.00 1.00 7.00 1.00 7.00 1.00.00 0.00

EBG1/1/1 Characteristics Unbalanced Mechanical Seal. Elastomer Bellow Independent on direction of rotation. Robust bellow seal with nondin crosssection, available in three standard DIN working lengths and with stationaries to suit all common European housing sizes. Metric Shaft Size Operating Limits p: <1 Bar ; V: <1 m/s t: 0 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Size Code STK EBG1 STK EBG1 STK EBG1 STK EBG1 SEAL + SEAT K STK EBG1 SEAL + SEAT N 10 0100 1.00 0.00 1.0.0.0.0.0 0.00 1 010.00.0 1.00.0.0.0.0 0.00 1 010.00 8.0 17.00 8.0.0.0.00 0.00 1 010 7.00 8.0 17.00 8.0.0.0.00 0.00 1 010 7.00 8.0 17.00 8.0.0.0.00 0.00 18 0180.00 1.00 1.0 0.00 7.0 7.0 7.0.00 0 000.00.0 1.0 0.00 7.0 7.0 7.0.00 00 7.00.0 1.0 0.00 7.0 7.0 7.0.00 00.00 1.10.0.0.0 7.0 0.00 0.00 00 0.00 1.10.00.0.0 7.0 0.00 0.00 8 080.00 7.0.0.00.0 7.0.0 0.00 0 000.00 7.0.0.00.0 7.0.0 0.00 00 8.00 1.00 7.0.00 7.0 7.0.0.00 00 8.00 1.00 7.0.00 7.0 7.0.0.00 00 0.00.0 8.0.00 7.0 7.0.0.00 8 080.00 7.0 0.00.00.00.00.00.00 0 000 8.00 0.00 0.00.00.00.00.00.00 00 1.00.80 0.00.00 1.00.00.00 0.00 00.00.70 0.00.00 1.00.00.00 0.00 8 080.00.0 0.0.00 1.00.00.00 0.00 0 000 70.00 71.80 0.0 8.00 0.0.0 7.0 0.00 00 7.00 7.00.00.0.00 11.00 7.0 70.00 00 7.00 78.0.00.0.00 11.00 7.0 70.00 8 080 78.00 8.0 7.00 1.0.00 11.00.0 70.00 0 000 80.00 8.0 8.00 1.0.00 11.00.0 70.00 00 8.00 0.0 0.00 1.0.00 11.00.0 80.00 8 080 0.00.00 0.00 1.0 8.70 11.0.0 80.00 70 0700.00 7.00 0.00 8.70 8.70 11.0 0.00 80.00 7 070 7.00 10.00 0.00 8.70 8.70 11.0 0.00 80.00 80 0800 10.00 10.0 0.00 8.00 78.00 1.00 0.00 0.00 8 080 110.00 11.70 1.00.00 7.00 1.00 0.00 0.00 0 000 11.00 1.0.00 1.00 7.00 1.00.00 0.00 00 10.00 17.0.00 1.00 7.00 1.00.00 0.00 100 01000 1.00 1.00 7.00 1.00 7.00 1.00.00 0.00

Elastomer Bellow EB1S/S/S Characteristics Unbalanced Mechanical Seal. Independent on direction of rotation. Elastomeric bellow mechanical seals of great resistance. Universal compact DIN seals to suit three standard DIN working lengths. Operating Limits p: <1 Bar ; V: <1 m/s t: 0 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code STK EB1S STK EBS STK EBS EBS SEAL + SEAT K EBS SEAL + SEAT N 10 0100 1.00 0.00 1.0.0.0.0.0 0.00 1 010.00.00 1.0.0.0.0.0 0.00 1 010.00.00 1.0 8.0.0.0.00 0.00 1 010 7.00.00 1.0 8.0.0.0.00 0.00 1 010 7.00.00 1.0 8.0.0.0.00 0.00 18 0180.00.00 18.0 0.00 7.0 7.0 7.0.00 0 000.00.00 18.0 0.00 7.0 7.0 7.0.00 00 7.00.00 18.0 0.00 7.0 7.0 7.0.00 00.00 8.00 18.0.0.0 7.0 0.00 0.00 00 0.00.00 18.0.0.0 7.0 0.00 0.00 8 080.00.00.0.00.0 7.0.0 0.00 0 000.00.00.0.00.0 7.0.0 0.00 00 8.00.00.0.00 7.0 7.0.0.00 00 8.00 7.00.0.00 7.0 7.0.0.00 00 0.00.00.0.00 7.0 7.0.0.00 8 080.00.00.00.00.00.00.00.00 0 000 8.00.00.00.00.00.00.00.00 00 1.00.00.00.00 1.00.00.00 0.00 00.00 1.00.00.00 1.00.00.00 0.00 8 080.00.00 1.00.00 1.00.00.00 0.00 0 000 70.00.00 0.0 8.00 0.0.0 7.0 0.00 00 7.00.00.00.0.00 11.00 7.0 70.00 00 7.00 71.00.00.0.00 11.00 7.0 70.00 8 080 78.00 78.00.00 1.0.00 11.00.0 70.00 0 000 80.00 80.00.00 1.0.00 11.00.0 70.00 00 8.00 8.00.00 1.0.00 11.00.0 80.00 70 0700.00 0.00.70 8.70 8.70 11.0 0.00 80.00 7 070 7.00.00 0.70 8.70 8.70 11.0 0.00 80.00 80 0800 10.00 10.00 0.0 8.00 78.00 1.00 0.00 0.00 8 080 110.00 10.00 8.0.00 7.00 1.00 0.00 0.00 0 000 11.00 11.00 8.0 1.00 7.00 1.00.00 0.00 00 10.00 11.00 8.0 1.00 7.00 1.00.00 0.00 100 01000 1.00 1.00 8.0 1.00 7.00 1.00.00 0.00

EB1// Characteristics Unbalanced Mechanical Seal. Elastomer Bellow Independent on direction of rotation. Elastomeric bellow mechanical seals of great resistance. Universal compact DIN seals to suit three standard DIN working lengths. Operating Limits Metric Shaft Size p: <1 Bar ; V: <1 m/s t: 0 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Size Code STK EB1 STK EB STK EB STK EB K STK EB N 10 0100 1.00 0.00 1.0.0.0.0.0 0.00 1 010.00.00 1.0.0.0.0.0 0.00 1 010.00.00 1.0 8.0.0.0.00 0.00 1 010 7.00.00 1.0 8.0.0.0.00 0.00 1 010 7.00.00 1.0 8.0.0.0.00 0.00 18 0180.00.00 18.0 0.00 7.0 7.0 7.0.00 0 000.00.00 18.0 0.00 7.0 7.0 7.0.00 00 7.00.00 18.0 0.00 7.0 7.0 7.0.00 00.00 8.00 18.0.0.0 7.0 0.00 0.00 00 0.00.00 18.0.0.0 7.0 0.00 0.00 8 080.00.00.0.00.0 7.0.0 0.00 0 000.00.00.0.00.0 7.0.0 0.00 00 8.00.00.0.00 7.0 7.0.0.00 00 8.00 7.00.0.00 7.0 7.0.0.00 00 0.00.00.0.00 7.0 7.0.0.00 8 080.00.00.00.00.00.00.00.00 0 000 8.00.00.00.00.00.00.00.00 00 1.00.00.00.00 1.00.00.00 0.00 00.00 1.00.00.00 1.00.00.00 0.00 8 080.00.00 1.00.00 1.00.00.00 0.00 0 000 70.00.00 0.0 8.00 0.0.0 7.0 0.00 00 7.00.00.00.0.00 11.00 7.0 70.00 00 7.00 71.00.00.0.00 11.00 7.0 70.00 8 080 78.00 78.00.00 1.0.00 11.00.0 70.00 0 000 80.00 80.00.00 1.0.00 11.00.0 70.00 00 8.00 8.00.00 1.0.00 11.00.0 80.00 70 0700.00 0.00.70 8.70 8.70 11.0 0.00 80.00 7 070 7.00.00 0.70 8.70 8.70 11.0 0.00 80.00 80 0800 10.00 10.00 0.0 8.00 78.00 1.00 0.00 0.00 8 080 110.00 10.00 8.0.00 7.00 1.00 0.00 0.00 0 000 11.00 11.00 8.0 1.00 7.00 1.00.00 0.00 00 10.00 11.00 8.0 1.00 7.00 1.00.00 0.00 100 01000 1.00 1.00 8.0 1.00 7.00 1.00.00 0.00 7

Elastomer Bellow EB/J Characteristics Unbalanced Mechanical Seal. Compact DIN profile, ANSIcompliant, bellow seals to suit most Independent on direction of rotation. common, American standard working lengths, with a choice of boot or ORing stationaries to suit American housing sizes. Operating Limits p: < Bar ; V: <1 m/s t: 0 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. 8 Imperial Shaft Size Metric Shaft Size Size Code Imperial Metric Imperial Metric Imperial Metric Imperial Metric 1 010 1.000.0 0.8.00 0.81 0. 0.1 7. 0.00 1,7 017 1.000.0 0.8.00 0.81 0. 0.1 7. 0. 1,8 018 1.0 1.7 1.0.00 0.87. 0.0 10.8 1 010 1.0 1.7 1.0.00 0.87. 0.0 10.8 18 0180 1.7. 1.0.00 0.87. 0.0 10.8 0.70 1,1 011 1.7. 1.0.00 0.87. 0.0 10.8 0 000 1.00 8.10 1..00 0.7.80 0.0 10.8 00 1.00 8.10 1.17.00 0.7.80 0.0 10.8 0.87, 0 1.00 8.10 1.17.00 0.7.80 0.0 10.8 00 1. 1.8 1. 8.00 1.000.0 0.7 11.10 00 1. 1.8 1..00 1.000.0 0.7 11.10 1.000, 0 1. 1.8 1..00 1.000.0 0.7 11.10 8 080 1.70. 1..00 1.0.7 0.7 11.10 1.1 8, 08 1.70. 1..00 1.0.7 0.7 11.10 0 000 1.87 7. 1.7.00 1.0.7 0.7 11.10 1.0 1,7 017 1.87 7. 1.811.00 1.0.7 0.7 11.10 00 1.87 7. 1.811.00 1.0.7 0.7 11.10 00.000 0.80 1.80 7.00 1.1 8.8 0.7 11.10 1.7, 0.000 0.80 1..00 1.1 8.8 0.7 11.10 00.000 0.80 1..00 1.1 8.8 0.7 11.10 8 080.1.8.1.00 1.1 8.8 0.7 11.10 1.00 8,1 081.1.8.1.00 1.1 8.8 0.7 11.10 0 000.7 0..0.00 1.7. 0.00 1.70 1. 1, 01.7 0..0.00 1.7. 0.00 1.70 00.00.0..00 1.7. 0.00 1.70 00.00.0.0 1.00 1.7. 0.00 1.70 1.70, 0.00.0.0 1.00 1.7. 0.00 1.70 00..8.0 1.00 1.00 8.10 0.00 1.70 1.87 7, 07..8.0.00 1.00 8.10 0.00 1.70 8 080.70.8.0.00 1.00 8.10 0.00 1.70 0 000.70.8..70 1.00 8.10 0.00 1.70.000 0,8 008.70.8..70 1.00 8.10 0.00 1.70 00.000 7.0.717.00 1.88.88 0. 1.8.1, 0.000 7.0.717.00 1.88.88 0. 1.8 00.1 7.8.81 71.0 1.88.88 0. 1.8.0 7,1 071.1 7.8.071 78.00 1.88.88 0. 1.8 0 000.0 8..10 80.00 1.81.0 0. 1.8.7 0, 00.0 8..10 80.00 1.81.0 0. 1.8.00, 0.7 8.7.8 8.00 1.81.0 0. 1.8 00.7 8.7. 8.00 1.7.0 0. 1.8., 0.7 8.7. 8.00 1.7.0 0. 1.8.70,8 08.00 88.0. 0.00 1.7.0 0. 1.88 70 0700.00 88.0. 0.00 1.7.0 0. 1.88.87 7 070.70..780.00.0.7 0. 1.88 7 070.87 8..88.00.0.7 0. 1.88.000 7, 07.87 8..88.00.0.7 0. 1.88

Characteristics Balanced Mechanical Seal. EB Elastomer Bellow Independent on direction of rotation. Metal encased, rubber bellow seals to full DIN0 (EN17) K compatibility. The Stramek seal face is retained to avoid damage during seal installation. Metric Shaft Size K Operating Limits p: < Bar ; V: <1 m/s t: 0 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Size Code SEAL + SEAT K 1 010.00.00.0 8.0.00 1 010 7.00.00.0 8.0.00 18 0180.00.00 7.0 10.00 7.0 0 000.00.00 7.0 10.00 7.0 00 7.00.00 7.0 10.00 7.0 00.00 8.00 0.00 10.00 0.00 00 0.00.00 0.00 10.00 0.00 8 080.00.00.0 10.00.0 0 000.00.00.0 10.00.0 00 8.00.00.0 10.00.0 00 8.00 7.00.0 10.00.0 00 0.00.00.0 10.00.0 8 080.00.00.00 11.00.00 0 000 8.00.00.00 11.00.00 00 1.00.00.00 11.00.00 00.00 1.00.00 11.00.00 8 080.00.00.00 11.00.00 0 000 70.00.00.0 1.00 7.0 00 7.00.00.0 1.00 7.0 00 7.00 71.00.0 1.00 7.0 0 000 80.00 80.00.0 1.00.0 00 8.00 8.00.0 1.00.0 8 080 0.00 88.00 7.0 1.0.0 70 0700.00 8.00.70 1.0 0.00 7 070 7.00.00.70 1.0 0.00 80 0800 10.00 10.00.0 1.70 0.00 8 080 110.00 108.00.0 1.70 0.00 0 000 11.00 11.00.0 1.70.00 00 10.00 118.00.0 1.70.00 100 01000 1.00 1.00.0 1.70.00

Elastomer Bellow EBL Characteristics Balanced Mechanical Seal. Independent on direction of rotation. Metal encased, rubber bellow seals to full DIN0 (EN17) K compatibility. The Stramek seal face is retained to avoid damage during seal installation. K Metric Shaft Size Size Code Operating Limits p: < Bar ; V: <1 m/s t: 0 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. SEAL + SEAT K SEAT SLOT WIDTH EBL SEAT SLOT DEPTH EBL 1 010.00.00.0 8.0.00.00.00 1 010 7.00.00.0 8.0.00.00.00 18 0180.00.00 7.0 10.00 7.0.00.0 0 000.00.00 7.0 10.00 7.0.00.0 00 7.00.00 7.0 10.00 7.0.00.0 00.00 8.00 0.00 10.00 0.00.00.0 00 0.00.00 0.00 10.00 0.00.00.0 8 080.00.00.0 10.00.0.00.0 0 000.00.00.0 10.00.0.00.0 00 8.00.00.0 10.00.0.00.0 00 8.00 7.00.0 10.00.0.00.0 00 0.00.00.0 10.00.0.00.0 8 080.00.00.00 11.00.00.00.0 0 000 8.00.00.00 11.00.00.00.0 00 1.00.00.00 11.00.00.00.0 00.00 1.00.00 11.00.00.00.0 8 080.00.00.00 11.00.00.00.0 0 000 70.00.00.0 1.00 7.0.00.0 00 7.00.00.0 1.00 7.0.00.0 00 7.00 71.00.0 1.00 7.0.00.0 0 000 80.00 80.00.0 1.00.0.00.0 00 8.00 8.00.0 1.00.0.00.0 00 8.00 8.00.0 1.00.0.00.0 8 080 0.00 88.00 7.0 1.0.0.00.0 70 0700.00 8.00.70 1.0 0.00.00.0 7 070 7.00.00.70 1.0 0.00.00.0 80 0800 10.00 10.00.0 1.70 0.00.00.0 8 080 110.00 108.00.0 1.70 0.00.00.0 0 000 11.00 11.00.0 1.70.00.00.0 00 10.00 118.00.0 1.70.00.00.0 100 01000 1.00 1.00.0 1.70.00.00.0 0

Characteristics Balanced Mechanical Seal. A1 Parallel Spring Independent on direction of rotation. Flexible seal, suitable for the narrower seal housing and suiting common European seal housing standards. STK A1 has a long working length and is fitted with a seal head retainer backing plate. Operating Limits p: Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Metric Shaft Size Size Code 1 010 7.7.0. 8.7 0.00 017 7.7.0. 8.7 1 010 0. 7.07. 10. 0. 018 0. 7.07. 10. 1 010 0. 7.07. 10. 18 0180.1 0.. 10. 0.70 1 011.1 0.. 10. 0 000.70.. 10. 00 7.0.. 10. 0.87 0 7.0.. 10. 00 0.0 8.10. 10. 00 0.0 8.10. 10. 1.000 0 0.0 8.10. 10. 8 080 7. 1.8 0. 11. 1.1 08 7. 1.8 0. 11. 0 000 0.80.00 0. 11. 1.0 017 0.80.00 0. 11. 00 0.80.00 0. 11. 00.8 8.8 0. 11. 1.7 0.8 8.8 0. 11. 00.8 8.8 0. 11. 8 080 7.1 1.8 0. 11. 1.00 081 7.1 1.8 0. 11. 0 000 0. 8.10 0. 11. 1. 01 0. 8.10 0. 11. 00.0 1.7 70. 11. 1.70 0.0 1.7 70. 11. 00.0 1.7 70. 11. 1.87 07.8.8 70. 11. 8 080.8.8 70. 11. 0 000.8 8.01 70. 1.0.000 008.8 8.01 70. 1.0 00 7.0 7.0 70. 1.0.1 0 7.0 7.0 70. 1.0 00 7.0 7.0 70. 1.0.0 071 7.0 7.0 70. 1.0 0 000 7.8 78.7 70. 1.0.7 00 7.8 78.7 70. 1.0 00 8. 81. 70. 1.0.00 0 8. 81. 70. 1.0 00.08 8..8 1.88. 0.08 8..8 1.88.70 08. 8.0.8 1.88 70 0700. 8.0.8 1.88.87 070 8..7 7.0 1.88 7 070 101.0.7 7.0 1.88.000 07 101.0.7 7.0 1.88 1

Parallel Spring A/H Characteristics Balanced Mechanical Seal. Independent on direction of rotation. STK A coil fits over the seal head, reducing the overall working length, making this seal suitable for short gland depth applications, fitting to common European seal housing standards. Operating Limits p: Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Metric Shaft Size Size Code 1 10 7.7 0.0.0 8.7 0.00 17 7.7 0.0.0 8.7 1 10 7.7 0.0.0 8.7 1 10 0..7.0 10. 1 10 0..7.0 10. 0. 18 0..7.0 10. 1 10 0..7.0 10. 18 180.1..0 10. 0.70 1 11.1..0 10. 0 00.70.7.0 10. 0 7.0.7.0 10. 0.87 7.0.7.0 10. 0 0.0.0.0 10. 0 0.0.0.0 10. 1.000 0.0.0.0 10. 8 80 7..07. 11. 1.1 8 7..07. 11. 0 00 0.80.0. 11. 1.0 17 0.80.0. 11. 0 0.80.0. 11. 0.8 7.8. 11. 1.7.8 7.8. 11. 0.8 7.8. 11. 8 80 7.1 0.7. 11. 1.00 81 7.1 0.7. 11. 0 00 0. 7.0. 11. 1. 1 0. 7.0. 11. 0.0 71.7 0.8 11. 1.70.0 71.7 0.8 11. 0.0 71.7 0.8 11. 1.87 7.8 7.1 0.8 11. 8 80.8 7.1 0.8 11. 0 00.8 78.1 0.8 1.0.000 08.8 78.1 0.8 1.0 0 7.0 8.7 0.8 1.0.1 7.0 8.7 0.8 1.0 0 7.0 8.00 0.8 1.0.0 71 7.0 8.00 0.8 1.0 0 00 7.8 8.00 0.8 1.0.7 0 7.8 8.00 0.8 1.0 0 8.. 0.8 1.0.00 8.. 0.8 1.0 0.08 7..1 1.88..08 7..1 1.88.70 8. 101.10.1 1.88 70 700. 101.0.1 1.88.87 70 8. 10.7. 1.88 7 70 101.0 108.. 1.88.000 7 101.0 108.. 1.88

Characteristics Balanced Mechanical Seal. A/J Parallel Spring Independent on direction of rotation. As per STK A/J seal but design to suit common American standard working length and housing dimensions. Operating Limits p: Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Size Code Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.00 17 1.000.0 1.187 0.1 0.81 0. 0.1 7. 0. 18 1.0 1.7 1.1. 0.87. 0.0 10.8 0.70 11 1.7. 1.8. 0.87. 0.0 10.8 0.87 1.00 8.10 1..7 0.7.80 0.0 10.8 1.000 1. 1.8 1.78.0 1.000.0 0.7 11.10 1.1 8 1.70. 1.08 8.7 1.0.7 0.7 11.10 1.0 17 1.87 7..07.80 1.0.7 0.7 11.10 1.7.000 0.80.0.8 1.1 8.8 0.7 11.10 1.00 81.1.8..1 1.1 8.8 0.7 11.10 1. 1.7 0... 1.7. 0.00 1.70 1.70.00.0.71 70.1 1.7. 0.00 1.70 1.87 7..8.880 7.1 1.00 8.10 0.00 1.70.000 08.70.8.011 7.8 1.00 8.10 0.00 1.70.1.000 7.0. 8.71 1.87.8 0. 1.8.0 71.1 7.8.81 8.8 1.87.8 0. 1.8.7 0.0 8..0 8.0 1.81.0 0. 1.8.00.7 8.7.1. 1.81.0 0. 1.8..7 8.7.87 8. 1.7.0 0. 1.88.70 8.00 88.0.000 101.0 1.7.0 0. 1.88.87 70.70..1 10.78.0.7 0. 1.88.000 7.87 8..0 107..0.7 0. 1.88

Parallel Spring A/J Characteristics Balanced Mechanical Seal. Independent on direction of rotation. Spring profile as per STK A/J seal but designed to suit common American standards and supplied without the seal head retainer backing plate, utilised on STK A/J. Operating Limits p: Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Size Code Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.00 017 1.000.0 0.7.80 1.187 0.1 0.1 7. 0. 018 1.0 1.7 1.0 7.7 1.1. 0.0 10.8 0.70 011 1.7. 1.18 0. 1.1. 0.0 10.8 0.87 0 1.00 8.10 1..11 1.7. 0.0 10.8 1.000 0 1. 1.8 1.00 8.10 1..7 0.7 11.10 1.1 08 1.70. 1. 1.8 1. 1.8 0.7 11.10 1.0 017 1.87 7. 1.81.0 1. 1.8 0.7 11.10 1.7 0.000 0.80 1.17 8.8 1.87.8 0.7 11.10 1.00 081.1.8.01 1.8 1.87.8 0.7 11.10 1. 01.7 0..87 8.10.000 0.80 0.00 1.70 1.70 0.00.0.1 1.7.000 0.80 0.00 1.70 1.87 07..8.7..1.8 0.00 1.70.000 008.70.8. 7.1.1.8 0.00 1.70.1 0.000 7.0.8 7.0.7 0. 0. 1.8.0 071.1 7.8. 7.0.7 0. 0. 1.8.7 00.0 8..08 78.0.00.0 0. 1.8.00 0.7 8.7.10 81..00.0 0. 1.8. 0.7 8.7. 8..70.8 0. 1.88.70 08.00 88.0.0 8.0.87 7.0 0. 1.88.87 070.70...7.87 7.0 0. 1.88.000 07.87 8..770.7.87 7.0 0. 1.88

Characteristics Unbalanced Mechanical Seal. R1/ Parallel Spring Independent on direction of rotation. Highly proficient and widely utilised mechanical seal. Parallel spring, rubber diaphragm seals to common American standard dimensions. Operating Limits p: 1 Bar ; V: 1 m/s t: 0 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Metric Shaft Size Size Code TYPE 11 TYPE Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.00 017 1.000.0 0..0 0.81 0. 1.0 1.7 0.1 7. 1 010 1.0 1.7 1.0 7.00 0.87. 1.7. 0.0 10.8 0. 018 1.0 1.7 1.0 7.00 0.87. 1.7. 0.0 10.8 1 010 1.0 1.7 1.0 7.00 0.87. 1.7. 0.0 10.8 18 0180 1.7. 1.0 0.70 0.87. 1.7. 0.0 10.8 0.70 011 1.7. 1.0 0.70 0.87. 1.7. 0.0 10.8 0 000 1.00 8.10 1.1.0 0.7.80 1.7.0 0.0 10.8 00 1.00 8.10 1.1.0 0.7.80 1.7.0 0.0 10.8 0.87 0 1.00 8.10 1.1.0 0.7.80 1.7.0 0.0 10.8 00 1. 1.8 1..0 1.000.0 1. 1.8 0.7 11.10 00 1. 1.8 1..0 1.000.0 1. 1.8 0.7 11.10 1.000 0 1. 1.8 1.701.0 1.000.0 1. 1.8 0.7 11.10 8 080 1.70. 1.7.0 1.0.7 1.87.8 0.7 11.10 1.1 08 1.70. 1.7.0 1.0.7 1.87.8 0.7 11.10 0 000 1.87 7. 1.8 7.0 1.0.7 1.87.8 0.7 11.10 1.0 017 1.87 7. 1.8 7.0 1.0.7 1.87.8 0.7 11.10 00 1.87 7. 1.8 7.0 1.0.7 1.87.8 0.7 11.10 00.000 0.80.07.00 1.1 8.8 1.87.8 0.7 11.10 1.7 0.000 0.80.07.00 1.1 8.8 1.87.8 0.7 11.10 00.000 0.80.071.00 1.1 8.8 1.87.8 0.7 11.10 8 080.1.8.18.0 1.1 8.8 1.87.8 0.7 11.10 1.00 081.1.8.17.0 1.1 8.8 1.87.8 0.7 11.10 0 000.7 0..1.0 1.7..000 0.80 0.00 1.70 1. 01.7 0..1.0 1.7..000 0.80 0.00 1.70 00.00.0..10 1.7..000 0.80 0.00 1.70 1.70 0.00.0..10 1.7..000 0.80 0.00 1.70 00..8..10 1.00 8.10.1.8 0.00 1.70 1.87 07..8..70 1.00 8.10.1.8 0.00 1.70 8 080.70.8..70 1.00 8.10.1.8 0.00 1.70 0 000.70.8.7 71.00 1.00 8.10.1.8 0.00 1.70.000 008.70.8.88 7.0 1.00 8.10.1.8 0.00 1.70 00.000 7.0.88 7.0 1.87.8.7 0. 0. 1.8.1 0.000 7.0.88 7.0 1.87.8.7 0. 0. 1.8 00.1 7.8.0 78.0 1.87.8.7 0. 0. 1.8.0 071.1 7.8.0 78.0 1.87.8.7 0. 0. 1.8 0 000.0 8.. 8.10 1.81.0.00.0 0. 1.8.7 00.0 8.. 8.10 1.81.0.00.0 0. 1.8.00 0.7 8.7.1 8.0 1.81.0.00.0 0. 1.8 00.7 8.7.88 88.0 1.7.0.70.8 0. 1.88. 0.7 8.7.88 88.0 1.7.0.70.8 0. 1.88.70 08.00 88.0. 0.00 1.7.0.70.8 0. 1.88 70 0700.00 88.0. 0.00 1.7.0.70.8 0. 1.88.87 070.70..78.0.0.7.87 7.0 0. 1.88 7 070.87 8..0 10.70.0.7.87 7.0 0. 1.88.000 07.87 8..0 10.70.0.7.87 7.0 0. 1.88.1 07.000 101.0.0 10.00.187..1 7.7 0.78 1.88.0 08.1 10.78.0 10.00.187..1 7.7 0.78 1.88.7 087.0 107.. 108.00.187..1 7.7 0.78 1.88.00 088.7 111.1.0 11.00.187..1 7.7 0.78 1.88. 01.00 11.0.88 11.00.1 8.7.0 8. 0.78 1.88.70 0. 117.8.8 11.00.1 8.7.0 8. 0.78 1.88.87 08.70 10..7 11.00.1 8.7.7 8.7 0.78 1.88.000 101.87 1.8.88 1.00.1 8.7.7 8.7 0.78 1.88

Parallel Spring R0/0 IMPERIAL Characteristics Unbalanced Mechanical Seal. Independent on direction of rotation. Highly proficient and widely utilised mechanical seal. Parallel spring, rubber diaphragm seals to common industry standard dimensions. Operating Limits p: 1 Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Size Code STK R0 STK RD0 0.7 00.0 1.80..0 8.7 0.00 017 7.7.0..0 8.7 0. 018 0. 7.00..0 10. 0.70 011.1 0.70..0 10. 0.87 0 7.0.0..0 10. 1.000 0 0.0.0..0 10. 1.1 08 7..0 0.. 11. 1.0 017 0.80 7.0 0.. 11. 1.7 0.8.00 0.. 11. 1.00 081 7.1.0 0.. 11. 1. 01 0..0 0.. 11. 1.70 0.0.10 70. 0.8 11. 1.87 07.8.70 70. 0.8 11..000 008.8 7.0 70. 0.8 1.0.1 0 7.0 7.0 70. 0.8 1.0.0 071 7.0 78.0 70. 0.8 1.0.7 00 7.8 8.10 70. 0.8 1.0.00 0 8. 8.0 70. 0.8 1.0. 0.08 88.0.8.1 1.88.70 08..00.8.1 1.88.87 070 8..0 7.0. 1.88.000 07 101.0 10.70 7.0. 1.88.1 07 111.1 10.00 7.8. 1.88.0 08 11.0 10.00 7.8. 1.88.7 087 117.8 108.00 7.8. 1.88.00 088 10. 11.00 7.8. 1.88.* 01 1.8 11.00 8. 8.7 1.88.70 0 17.00 11.00 8. 8.7 1.88.87* 08 10.0 11.00 8.7 1.1 1.88.000 101 1. 1.00 8.7 1.1 1.88

R0/0 METRIC Characteristics Unbalanced Mechanical Seal. Parallel Spring Independent on direction of rotation. Highly proficient and widely utilised mechanical seal. Parallel spring, rubber diaphragm seals to common industry standard dimensions. Operating Limits p: 1 Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft STK R0 STK RD0 Size Code Size 10 0100.0 1.80..0 8.7 1 010 7.7.0..0 8.7 1 010 7.7.0..0 8.7 1 010 0. 7.00..0 10. 1 010 0. 7.00..0 10. 1 010 0. 7.00..0 10. 18 0180.1 0.70..0 10. 1 010.1 0.70..0 10. 0 000.70.0..0 10. 00 7.0.0..0 10. 00 0.0.0..0 10. 00 0.0.0..0 10. 8 080 7..0 0.. 11. 00 7..0 0.. 11. 0 000 0.80 7.0 0.. 11. 00 0.80 7.0 0.. 11. 00.8.00 0.. 11. 00.8.00 0.. 11. 00.8.00 0.. 11. 8 080 7.1.0 0.. 11. 0 000 0..0 0.. 11. 1 010 0..0 0.. 11. 00.0.10 70. 0.8 11. 00.0.10 70. 0.8 11. 00.0.10 70. 0.8 11. 00.0.10 70. 0.8 11. 8 080.8.70 70. 0.8 11. 0 000.8 71.00 70. 0.8 1.0 00 7.0 7.0 70. 0.8 1.0 00 7.8 78.0 70. 0.8 1.0 8 080 7.8 8.10 70. 0.8 1.0 0 000 7.8 8.10 70. 0.8 1.0 00 8. 8.0 70. 0.8 1.0 00.08 88.0.8.1 1.88 70 0700. 0.00.8.1 1.88 7 070 101.0 10.70 7.0. 1.88 80 0800 11.0 10.00 7.8. 1.88 8 080 117.8 108.00 7.8. 1.88 0 000 1.8 11.00 7.8. 1.88 00 17.00 11.00 8. 8.7 1.88 100 01000 1. 1.00 8.7 1.1 1.88 7

Parallel Spring RDL Characteristics Unbalanced Mechanical Seal. Independent on direction of rotation. Parallel spring, rubber diaphragm seals to full DIN0 (EN17) dimensions, Klength. K Operating Limits p: 1 Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code K SLOT WIDTH RDL SLOT DEPTH RDL 1 010.00 1.70.0 8.0.0.00.00 1 010.00.0.0 8.0.00.00.00 1 010 7.00 7.00.0 8.0.00.00.00 18 0180.00 0.0 7.0 10.00 7.0.00.0 0 000.00.0 7.0 10.00 7.0.00.0 00 7.00.0 7.0 10.00 7.0.00.0 00.00 7.80 0.00 10.00 0.00.00.0 00 0.00.0 0.00 10.00 0.00.00.0 8 080.00.10.0 10.00.0.00.0 0 000.00.00.0 10.00.0.00.0 00 8.00.0.0 10.00.0.00.0 00 8.00.0.0 10.00.0.00.0 00 0.00.0.0 10.00.0.00.0 8 080.00.70.00 11.00.00.00.0 0 000 8.00.70.00 11.00.00.00.0 00 1.00 8.0.00 11.00.00.00.0 00.00 1.00.00 11.00.00.00.0 8 080.00.00.00 11.00.00.00.0 0 000 70.00.10.0 1.00 7.0.00.0 00 7.00 70.0.0 1.00 7.0.00.0 00 7.00 70.0.0 1.00 7.0.00.0 8 080 78.00 80.00.0 1.00.0.00.0 0 000 80.00 80.00.0 1.00.0.00.0 00 8.00 8.10.0 1.00.0.00.0 00 8.00 8.00.0 1.00.0.00.0 8 080 0.00 0.00 7.0 1.0.0.00.0 70 0700.00 0.00.70 1.0 0.00.00.0 7 070 7.00.80.70 1.0 0.00.00.0 80 0800 10.00 10.00.0 1.70 0.00.00.0 8 080 110.00 108.00.0 1.70 0.00.00.0 0 000 11.00 111.00.0 1.70.00.00.0 00 10.00 11.00.0 1.70.00.00.0 100 01000 1.00 1.00.0 1.70.00.00.0 8

Characteristics Unbalanced Mechanical Seal. RD Parallel Spring Independent on direction of rotation. Parallel spring, rubber diaphragm seals designed to comply with DIN0 (EN17) dimensions, Klength. K Operating Limits p: 10 Bar ; V: 1 m/s t: 0 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code K 1 010.00 1.70.0 8.0.0 1 010.00.0.0 8.0.00 1 010 7.00 7.00.0 8.0.00 18 0180.00 0.0 7.0 10.00 7.0 0 000.00.0 7.0 10.00 7.0 00 7.00.0 7.0 10.00 7.0 00.00 7.80 0.00 10.00 0.00 00 0.00.0 0.00 10.00 0.00 8 080.00.10.0 10.00.0 0 000.00.00.0 10.00.0 00 8.00.0.0 10.00.0 00 8.00.0.0 10.00.0 00 0.00.0.0 10.00.0 8 080.00.70.00 11.00.00 0 000 8.00.70.00 11.00.00 00 1.00 8.0.00 11.00.00 00.00 1.00.00 11.00.00 8 080.00.00.00 11.00.00 0 000 70.00.10.0 1.00 7.0 00 7.00 70.0.0 1.00 7.0 00 7.00 70.0.0 1.00 7.0 8 080 78.00 80.00.0 1.00.0 0 000 80.00 80.00.0 1.00.0 00 8.00 8.10.0 1.00.0 00 8.00 8.00.0 1.00.0 8 080 0.00 0.00 7.0 1.0.0 70 0700.00 0.00.70 1.0 0.00 7 070 7.00.80.70 1.0 0.00 80 0800 10.00 10.00.0 1.70 0.00 8 080 110.00 108.00.0 1.70 0.00 0 000 11.00 111.00.0 1.70.00 00 10.00 11.00.0 1.70.00 100 01000 1.00 1.00.0 1.70.00

Parallel Spring R1J Characteristics Unbalanced Mechanical Seal. Independent on direction of rotation. Highly proficient and widely utilised mechanical seal. Parallel spring, rubber diaphragm seals to common American standard dimensions. Operating Limits p: 1 Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Size Code Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.00 017 1.000.0 0.88.80 0.81 0. 0.1 7. 0. 018 1.0 1.7 1.0 7.00 0.87. 0.0 10.8 0.70 011 1.7. 1.17 0.0 0.87. 0.0 10.8 0.87 0 1.00 8.10 1.1.0 0.7.80 0.0 10.8 1.000 0 1. 1.8 1.7.0 1.000.0 0.7 11.10 1.1 08 1.70. 1.0 1.0 1.0.7 0.7 11.10 1.0 017 1.87 7. 1.787.0 1.0.7 0.7 11.10 1.7 0.000 0.80 1.1.0 1.1 8.8 0.7 11.10 1.00 081.1.8.07.0 1.1 8.8 0.7 11.10 1. 01.7 0..18.0 1.7. 0.00 1.70 1.70 0.00.0.0 1.00 1.7. 0.00 1.70 1.87 07..8.0.00 1.00 8.10 0.00 1.70.000 008.70.8.87.70 1.00 8.10 0.00 1.70.1 0.000 7.0.77 70.0 1.87.8 0. 1.8.0 071.1 7.8.10 80.00 1.87.8 0. 1.8.7 00.0 8..1 7.0 1.81.0 0. 1.8.00 0.7 8.7.0 81.0 1.81.0 0. 1.8. 0.7 8.7.7 87.0 1.7.0 0. 1.88.70 08.00 88.0. 0.00 1.7.0 0. 1.88.000 07.87 8..811.80.0.7 0. 1.88.1 07.000 101.0.0 10.00.187. 0.78 1.88.0 08.1 10.78.0 10.00.187. 0.78 1.88.7 087.0 107.. 108.00.187. 0.78 1.88.00 088.7 111.1.0 11.00.187. 0.78 1.88. 01.00 11.0.88 11.00.1 8.7 0.78 1.88.70 0. 117.8.8 11.00.1 8.7 0.78 1.88.87 08.70 10..7 11.00.1 8.7 0.78 1.88.000 101.87 1.8.88 1.00.1 8.7 0.78 1.88 0

Characteristics Unbalanced Mechanical Seal. R1N Parallel Spring Independent on direction of rotation. Parallel spring, rubber diaphragm seals to full ANSI compability, through incorporating a narrow profile seal design. STK R1N incorporates an elastomer resiliently mounted ring face. Operating Limits p: 1 Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Size Code Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.00 017 1.000.0 0.88.80 0.81 0. 0.1 7. 0. 018 1.0 1.7 1.0 7.00 0.87. 0.0 10.8 0.70 011 1.7. 1.17 0.0 0.87. 0.0 10.8 0.87 0 1.00 8.10 1.1.0 0.7.80 0.0 10.8 1.000 0 1. 1.8 1.7.0 1.000.0 0.7 11.10 1.1 08 1.70. 1.0 1.0 1.0.7 0.7 11.10 1.0 017 1.87 7. 1.787.0 1.0.7 0.7 11.10 1.7 0.000 0.80 1.1.0 1.1 8.8 0.7 11.10 1.00 081.1.8.07.0 1.1 8.8 0.7 11.10 1. 01.7 0..18.0 1.7. 0.00 1.70 1.70 0.00.0.0 1.00 1.7. 0.00 1.70 1.87 07..8.0.00 1.00 8.10 0.00 1.70.000 008.70.8.87.70 1.00 8.10 0.00 1.70.1 0.000 7.0.77 70.0 1.87.8 0. 1.8.0 071.1 7.8.10 80.00 1.87.8 0. 1.8.7 00.0 8..1 7.0 1.81.0 0. 1.8.00 0.7 8.7.0 81.0 1.81.0 0. 1.8. 0.7 8.7.7 87.0 1.7.0 0. 1.88.70 08.00 88.0. 0.00 1.7.0 0. 1.88.000 07.87 8..811.80.0.7 0. 1.88.1 07.000 101.0.0 10.00.187. 0.78 1.88.0 08.1 10.78.0 10.00.187. 0.78 1.88.7 087.0 107.. 108.00.187. 0.78 1.88.00 088.7 111.1.0 11.00.187. 0.78 1.88. 01.00 11.0.88 11.00.1 8.7 0.78 1.88.70 0. 117.8.8 11.00.1 8.7 0.78 1.88.87 08.70 10..7 11.00.1 8.7 0.78 1.88.000 101.87 1.8.88 1.00.1 8.7 0.78 1.88 1

Parallel Spring RD0H Characteristics Unbalanced Mechanical Seal. Independent on direction of rotation. Highly proficient and widely utilised mechanical seal. Parallel spring, rubber diaphragm seals to common industry standard dimensions. Operating Limits p: 1 Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Size Code 0.7 00.0 1.80.0 8.7 0.00 017 7.7.0.0 8.7 0. 018 0. 7.00.0 10. 0.70 011.1 0.70.0 10. 0.87 0 7.0.0.0 10. 1.000 0 0.0.0.0 10. 1.1 08 7..0. 11. 1.0 017 0.80 7.0. 11. 1.7 0.8.00. 11. 1.00 081 7.1.0. 11. 1. 01 0..0. 11. 1.70 0.0.10 0.8 11. 1.87 07.8.70 0.8 11..000 008.8 7.0 0.8 1.0.1 0 7.0 7.0 0.8 1.0.0 071 7.0 78.0 0.8 1.0.7 00 7.8 8.10 0.8 1.0.00 0 8. 8.0 0.8 1.0. 0.08 88.0.1 1.88.70 08. 0.00.1 1.88.87 070 8..0. 1.88.000 07 101.0 10.70. 1.88.1* 07 111.1 10.00. 1.88.0* 08 11.0 10.00. 1.88.7* 087 117.8 108.00. 1.88.00* 088 10. 11.00. 1.88.* 01 1.8 11.00 8.7 1.88.70* 0 17.00 11.00 8.7 1.88.87* 08 10.0 11.00 1.1 1.88.000* 101 1. 1.00 1.1 1.88

Characteristics Unbalanced Mechanical Seal. PS Parallel Spring Independent on direction of rotation. D Robust, general purpose, parallel spring seal to suit standard metric and imperial housing dimensions that are mainly found in the marine and textile industries. Operating Limits p: 1 Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Size Code D SLOT WIDTH SLOT DEPTH 0. 018 8.7 1.0.00.0.00.00.00 0.70 011 1.7..0.0.00.00.00 000..00.0 7.0.00.00.00 0.87 0..0..00.00.00.00 00.8 8.7 8.10 0.00 10.00.00.00 1.000 0.8 8.7 8.10 0.00 10.00.00.00 080.0 1.7.0 1.0 10.00.00.00 1.1 08.0 1.7.0 1.0 10.00.00.00 000...0 1.0 10.00.00.00 1.0 017...0.0 10.00.00.00 00...0.0 10.00.00.00 1.7 0.8 8.10.0 7.0 10.00.00.00 00.8 8.10.0 7.0 10.00.00.00 080..88.0 7.0 10.00.00.00 1.00 081..88.0 7.0 10.00.00.00 000...00 7.0 10.00.00.00 1. 01.8.0.0 7.0 10.00.00.00 00.8.0.0 7.0 10.00.00.00 00.0.0.0 7.0 10.00.00.00 1.70 0.0.0.0 7.0 10.00.00.00 00.0.0.0 7.0 10.00.00.00 1.87 07.8.7.0.0 10.00.00.0 000.7.7.00.0 10.00.00.0.000 008.8.7.8.0 10.00.00.0.1 0 70.0 8.7 70.0 7.00 10.00.00.0 00 70.0 8.7 70.0 7.00 10.00.00.0.0 071 7.0 1.0 7.0 7.00 10.00.00.0 000 7.8.07 77.00 0.0 10.00.00.0.7 00 7.8.07 7.0 0.0 10.00.00.0.00 0 7. 8.8 7.8 0.0 10.00.00.0 00 81..8 8.00.0 10.00.00.0. 0 8.7 71. 8..0 10.00.00.0.70 08 8.0 7.0 8.0.0 10.00.00.0 0700 8.0 7.0 8.0.0 10.00.00.0.87 070 8.08 77.77 0.00.0 10.00.00.0 070 0.77 7.7 1.0.0 10.00.00.0.000 07. 80.7..00 10.00.00.0 0800 100. 8.7.0.00 10.00.00.0.0 08 101.78 87.0 101.0.00 10.00.00.0 080 10.77 8.0 10.0.00 10.00.00.0.7 087 10. 8.0 10.8.00 10.00.00.0.00 088 108.1.7 107..00 10.00.00.0 000 10.8. 110.0 8.00 10.00.00.0 00 11.0 100.00 11.0 8.00 10.00.00.0 1000 11. 10.77 10.00 8.00 10.00.00.0.000 101 1.00 107. 1.0 7.0 10.00.00.0 100 1.87 1.00 1.00 78.0 10.00.00.0

Parallel Spring PS Characteristics Unbalanced Mechanical Seal. Independent on direction of rotation. Robust, general purpose, parallel spring seal to suit standard metric and imperial housing dimensions that are mainly found in the marine and textile industries. Operating Limits p: 1 Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft SLOT SLOT Size Code Size WIDTH DEPTH 0. 018 8.7.00.00.00.00.00 0.70 011 1.7.0.00.00.00.00 000..0.00.00.00.00 0.87 0.. 7.0.00.00.00 00.8 8.10 1.0 10.00.00.00 1.000 0.8 8.10 1.0 10.00.00.00 080.0.0.00 10.00.00.00 1.1 08.0.0.00 10.00.00.00 000..0.00 10.00.00.00 1.0 017..0.00 10.00.00.00 00..0.00 10.00.00.00 1.7 0.8.0.00 10.00.00.00 00.8.0.00 10.00.00.00 080..0.00 10.00.00.00 1.00 081..0.00 10.00.00.00 000..00.00 10.00.00.00 1. 01.8.0.00 10.00.00.00 1.70 0.0.0.00 10.00.00.00 00.0.0.00 10.00.00.00 1.87 07.8.0.00 10.00.00.0 000.7.00 7.00 10.00.00.0.000 008.8.8 7.00 10.00.00.0.1 0 70.0 70.0 8.0 10.00.00.0 00 70.0 70.0 8.0 10.00.00.0.0 071 7.0 7.0 8.0 10.00.00.0 000 7.8 77.00.00 10.00.00.0.7 00 7.8 7.0.00 10.00.00.0.00 0 7. 7.8.00 10.00.00.0 00 81. 8.00.00 10.00.00.0. 0 8.7 8..00 10.00.00.0.70 08 8.0 8.0.00 10.00.00.0 0700 8.0 8.0.00 10.00.00.0.87 070 8.08 0.00 0.00 10.00.00.0 070 0.77 1.0 0.00 10.00.00.0.000 07...00 10.00.00.0 0800 100..0.00 10.00.00.0.0 08 101.78 101.0.00 10.00.00.0 080 10.77 10.0.00 10.00.00.0.00 088 108.1 107..00 10.00.00.0 000 10.8 110.0 71.00 10.00.00.0 00 11.0 11.0 71.00 10.00.00.0 1000 11. 10.00 71.00 10.00.00.0.000 101 1.00 1.0 7.0 10.00.00.0

Characteristics Unbalanced Mechanical Seal. PS7 Parallel Spring Independent on direction of rotation. Robust, general purpose, parallel spring seal to suit standard metric and imperial housing dimensions that are mainly found in the marine and textile industries. Operating Limits p: 1 Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Size Code SLOT WIDTH 0. 018 8.7.00.0.00.00.00 0.70 011 1.7.0.0.00.00.00 000..0.0.00.00.00 0.87 0...0.00.00.00 00.8 8.10.00 10.00.00.00 1.000 0.8 8.10.00 10.00.00.00 080.0.0 1.00 10.00.00.00 1.1 08.0.0 1.00 10.00.00.00 000..0 1.00 10.00.00.00 1.0 017..0.00 10.00.00.00 00..0.00 10.00.00.00 1.7 0.8.0 7.00 10.00.00.00 00.8.0 7.00 10.00.00.00 080..0 7.00 10.00.00.00 1.00 081..0 7.00 10.00.00.00 000..00 7.00 10.00.00.00 1. 01.8.0 7.00 10.00.00.00 00.8.0 7.00 10.00.00.00 1.70 0.0.0 7.00 10.00.00.00 00.0.0 7.00 10.00.00.00 1.87 07.8.0.00 10.00.00.0 000.7.00 8.0 10.00.00.0.000 008.8.8 8.0 10.00.00.0.1 0 70.0 70.0 0.00 10.00.00.0 00 70.0 70.0 0.00 10.00.00.0.0 071 7.0 7.0 0.00 10.00.00.0 000 7.8 77.00.00 10.00.00.0.7 00 7.8 7.0.00 10.00.00.0.00 0 7. 7.8.00 10.00.00.0 00 81. 8.00.00 10.00.00.0. 0 8.7 8..00 10.00.00.0.70 08 8.0 8.0.00 10.00.00.0 0700 8.0 8.0.00 10.00.00.0.87 070 8.08 0.00 71.00 10.00.00.0 070 0.77 1.0 71.00 10.00.00.0.000 07.. 77.0 10.00.00.0 0800 100..0 77.0 10.00.00.0.0 08 101.78 101.0 77.0 10.00.00.0 080 10.77 10.0 77.0 10.00.00.0.00 088 108.1 107. 77.0 10.00.00.0 000 10.8 110.0 8.00 10.00.00.0 00 11.0 11.0 8.00 10.00.00.0 1000 11. 10.00 8.00 10.00.00.0.000 101 1.00 1.0 88.0 10.00.00.0 110 1. 17.0 88.0 10.00.00.0 100 1.87 1.00.00 10.00.00.0 SLOT DEPTH

Parallel Spring PS8 Characteristics Unbalanced Mechanical Seal. Independent on direction of rotation. Robust, general purpose, parallel spring seal to suit standard metric and imperial housing dimensions that are mainly found in the marine and textile industries. Operating Limits p: 1 Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code 0 000 7.00.0 8.00.00 00.00. 8.00.00 00 0.00 8.10 8.00.00 8 080.00.00 0.00.00 0 000 7.00.0 0.00.00 00 8.00 7.00 0.00.00 00 1.00 0.00 0.00.00 8 080.00.00.00.00 0 000 7.00.00.00.00 00 0.0.0 0.00.00 00 1.00 0.00 0.00.00 8 080.00.00.00.00 0 000 7.00.00.00.00 00 70.00 8.00 8.00.00 00 7.00 71.00 8.00.00 8 080 7.00 7.00 8.00.00 0 000 80.00 77.00 0.00.00 00 8.00 78.00 0.00.00 00 8.00 8.00.00.00 8 080 8.00 8.00.00.00 70 0700 8.00 87.00.00.00 7 070.00 1.0.00.00 80 0800.00.0 70.00.00 8 080 10.00 10.0 70.00.00 0 000 111.00 110.0 70.00.00 00 11.00 11.0 7.00.00 100 01000 118.00 10.00 7.00.00 10 0100 1.00 18.00 7.00 8.00 110 01100 17.00 1.00 80.00 8.00 11 0110 10.00 17.0 80.00 8.00 10 0100 17.00 1.00 8.00 8.00 1 010 10.00 1.00 8.00 8.00 10 0100 1.00 1.00 8.00 8.00

MS0/S/B/BS Characteristics Multiple Spring Balanced/Unbalanced Mechanical Seal. Independent on direction of rotation. Standard multispring, grub screwed seal, available in a wide variety of face and secondary seal, materials and designs. Frequently fitted with the FT clamped stationary. Imperial Shaft Size Operating Limits p: /0 Bar ; V: 1 m/s t: 0 / +0ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code Seat Size Fitted (MSB/BS Only) STK MS0/S STK MS0B/BS Imperial Metric Imperial Metric Imperial Metric 0. 018 017 1.0 0.70 0.70 1.0 1.0.7 0.70 011 018 1..70 0.87. 1.187 0.1 0 000 N/a 1.0.70 0.7.81 N/a N/a 00 N/a 1.7 7.00 0.7.81 N/a N/a 0.87 0 011 1. 8.00 0.7.81 1.0 1.7 00 N/a 1..70 1.000.0 N/a N/a 00 N/a 1.1 1.00 1.000.0 N/a N/a 1.000 0 0 1.1 1.00 1.000.0 1.1. 8 080 N/a 1.7.0 1.0.0 N/a N/a 1.1 08 0 1.7.00 1.0.0 1.7. 0 000 N/a 1.870 7.0 1.0.0 N/a N/a 1.0 017 08 1..00 1.0.0 1.7. 00 N/a 1. 0.70 1.1 8.8 N/a N/a 1.7 0 08.07.00 1.1 8.8 1.7.0 00 N/a.07.00 1.1 8.8 N/a N/a 8 080 N/a.18.0 1.1 8.8 N/a N/a 1.00 081 017.18.0 1.1 8.8 1.7.0 0 000 N/a.8.0 1.7. N/a N/a 1. 01 0.0 1.00 1.7. 1.70. 1.70 0 081.1.0 1.7. 1.70. 00 N/a..0 1.7. N/a N/a 1.87 07 01..10 1.7. 1.70. 8 080 N/a..10 1.7. N/a N/a 0 000 N/a.71.0 1.7. N/a N/a.000 008 0.78 70.70 1.7. 1.70..1 0 07.01 77.00 1.87.8.0. 00 N/a.078 78.0 1.87.8 N/a N/a.0 071 008.1 80.10 1.87.8.0. 0 000 N/a.7 8.10 1.87.8 N/a N/a.7 00 0.7 8.10 1.87.8.0..00 0 071.0 8.0 1.87.8.0. 00 N/a.1 87.0 1.87.8 N/a N/a. 0 00.8 8.0 1.87.8.0..70 08 0..80 1.87.8.0. 70 0700 N/a..80 1.87.8 N/a N/a.87 070 0.77.0 1.87.8.0. 7 070 N/a.787.0 1.87.8 N/a N/a.000 07 08.8 7.70 1.87.8.0..1 07 070. 100.70 1.87.8.0. 80 0800 N/a.8 101.0 1.87.8 N/a N/a.0 08 07.1 10.0 1.87.8.0. 8 080 N/a.0 107.70 1.87.8 N/a N/a.7 087 07.80 108.70 1.87.8.0..00 088 08.0 11.00 1.87.8.0. 0 000 N/a.1 11.80 1.87.8 N/a N/a. 01 087.8 11.00 1.87.8.0. 00 N/a. 117.70 1.87.8 N/a N/a.70 0 088. 118.0 1.87.8.0..87 08 01.77 11.0 1.87.8.0. 100 1000 N/a.81 1.70 1.87.8 N/a N/a.000 101 0.0 1.0 1.87.8.0. 7

Multiple Spring MS/S/B/BS Characteristics Balanced/Unbalanced Mechanical Seal. Independent on direction of rotation. Thin profiled, multispring, grub screw mounted seal, conforming to ANSI B 717 for American standard equipment. Commonly specified for ardous applications. Operating Limits p: /0 Bar ; V: 1 m/s t: 0 / +0ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Metric Shaft Size Size Code Seat Size Fitted (MB/BS Only) STK MS/S STK MSB/BS Imperial Metric Imperial Metric Imperial Metric 0.00 1.7 017 N/a 0.7.80 0.7.80 N/a N/a 0. 1.8 018 N/a 1.0 7.00 0.7.80 N/a N/a 0.70 1.1 011 018 1.18 0.0 0.7.80 1.0 1.7 0.87. 0 011 1.1.0 0.7.80 1.0 1.7 1.000. 0 0 1.7.0 1.000.0 1.1. 1.1 8. 08 0 1..70 1.000.0 1.7. 1.0 1.7 017 08 1.8.0 1.000.0 1.7. 1.7. 0 08 1.1.0 1.7. 1.8.80 1.00 8.1 081 017 1.1.0 1.1 8.8 1.7.0 1. 1. 01 0.0 7.0 1.17.0 1. 0.0 1.70. 0 081.1 8.80 1.7. 1.70. 1.87 7. 07 01.00.0 1.7. 1.70..000 0.8 008 0..70 1.7. 1.70..1. 0 07.81 71.0 1.87.8.0..0 7.1 071 008.8 7.0 1.7. 1.7..7 0. 00 0.008 7.0 1.87.8.0..00. 0 071.1 7.0 1.7. 1.7... 0 00. 8.0 1.87.8.0..70.8 08 0.7 8.70 1.87.8.0..87 7.0 070 0.00 88.0 1.87.8.0..000 7. 07 08..10 1.87.8.0..1 7. 07 070.7.0 1.87.8.0..0 8. 08 07.87 8.0 1.87.8.0..7 8.7 087 07.000 101.0 1.87.8.0..00 88. 088 08.1 10.80 1.87.8.0...1 01 087. 108.00 1.87.8.0..70. 0 088.7 111.10 1.87.8.0..87 8. 08 01.00 11.0 1.87.8.0..000 101. 101 0. 117.0 1.87.8.0. 8

MS/S/B/BS Characteristics Multiple Spring Balanced/Unbalanced Mechanical Seal. Independent on direction of rotation. Standard multispring, grub screwed seal, available in a wide variety of face and secondary seal, materials and designs. Frequently fitted with the FT clamped stationary. Operating Limits p: /0 Bar ; V: 1 m/s t: 0 / +0ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Seal / Assembly Stock Code Seat Size Fitted (1B/BS Only) TYPE MS/S TYPE MSB/BS 1 010 N/a.00.00 N/a 18 0180 010.00.00 0.0 0 000 010.0.00 0.0 00 0180.0.00 1.0 00 000 8.0.70 1.0 00 N/a 0.00 7.00 N/a 8 080 00.00 0.00.0 0 000 00.00 0.0.0 00 N/a 7.10 0.0 N/a 00 080 8.0 0.0 7.0 00 000 0.00 0.0 8.00 8 080 00.00.00 8.00 0 000 00.00.00 8.00 00 080.00.00.0 00 000 1.00.00.0 8 080 00.0.00.0 0 000 00.0.00.0 00 080.70.00.0 00 000 70.80.00.00 8 080 00 78.00.00.00 0 000 00 80.10.00.00 00 080 8.0.00.00 00 000 8.0.00.00 8 080 00 87.80.00.00 70 0700 00 0.00.0.00 7* 070 0700.00.0.0 80* 0800 070 10.10.00.0 8* 080 0800 10.0.00.00 0* 000 080 11.00 0.00 0.00 * 00 000 11.0 0.00 0.00 100* 1000 00 1.10 0.00 0.00

Multiple Spring MSL/SL/BSL Characteristics Unbalanced Mechanical Seal. Independent on direction of rotation. Standard multispring, grub screwed seal, compact design complies to DIN0 (EN17) and ISO 0 standards. Commonly specified for ardous applications. Operating Limits p: Bar ; V: 1 m/s t: 0 / +0ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code Seat Size Fitted (MSBSL ) STK MS STK MSB 1 010 N/a 7.00.00 8.0.00 N/a N/a N/a 18 0180 010.00.00 10.00.00.00 0.0 8.0 0 000 010.00.00 10.00.0 7.00 0.0 8.0 00 0180 7.00.00 10.00.0.00 1.0 10.00 00 000.00.70 10.00 8.0.00 1.0 10.00 00 N/a 0.00 7.00 10.00 0.00 N/a N/a N/a 8 080 00.00 0.00 10.00.00.00.0 10.00 0 000 00.00 0.0 10.00.00 0.00.0 10.00 00 N/a 8.00 0.0 10.00 7.10 N/a N/a N/a 00 080 8.00 0.0 10.00 8.0.00 7.0 10.00 00 000 0.00 0.0 10.00 0.00.00 8.00 10.00 8 080 00.00.00 11.00.00 8.00 8.00 10.00 0 000 00 8.00.00 11.00.00 0.00 8.00 10.00 00 080 1.00.00 11.00.00.00.0 11.00 00 000.00.00 11.00 1.00 8.00.0 11.00 8 080 00.00.00 11.00.0 1.00.0 11.00 0 000 00 70.00.00 1.00.0.00.0 11.00 00 080 7.00.00 1.00.0.00.0 11.00 00 000 7.00.00 1.00 70.80 70.00.00 1.00 8 080 00 78.00.00 1.00 78.00 7.00.00 1.00 0 000 00 80.00.00 1.00 80.10 7.00.00 1.00 00 080 8.00.00 1.00 8.0 78.00.00 1.00 00 000 8.00.00 1.00 8.0 80.00.00 1.00 8 080 00 0.00.00 1.0 87.80 8.00.00 1.00 70 0700 00.00.0 1.0 0.00 8.00.00 1.00 7* 070 0700 7.00.0 1.0.00.00.0 1.0 80* 0800 070 10.00.00 1.70 10.10 7.00.0 1.0 8* 080 0800 110.00.00 1.70 10.0 10.00.00 1.70 0* 000 080 11.00 0.00 1.70 11.00 110.00 0.00 1.70 * 00 000 10.00 0.00 1.70 11.0 11.00 0.00 1.70 100* 01000 00 1.00 0.00 1.70 1.10 10.00 0.00 1.70 0

Characteristics H0 Multiple Spring Balanced Mechanical Seal. Independent on direction of rotation. STK H0 is a multiplespring internal seal of advanced robust design and proficient performance. STK H0 can be supplied with a wide range of elastomers, face materials and be installed with a variety of seats. Operating Limits p: Bar ; V: 1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Size Metric Shaft Size Size Code H0 SLOT WIDTH H0 SLOT DEPTH 18 0180.00.0 0.00 10.00.00.0 0.70 011 N/a.0 0.00 N/a N/a N/a 0 000.00.0 0.00 10.00.00.0 00 7.00.0 0.00 10.00.00.0 0.87 0 N/a.0 0.00 N/a N/a N/a 00.00 8.0 0.00 10.00.00.0 00 0.00.0 0.00 10.00.00.0 1.000 0 N/a.0 0.00 N/a N/a N/a 8 080.00.0.0 10.00.00.0 1.1 08 N/a.0.0 N/a N/a N/a 0 000.00.0.0 10.00.00.0 1.0 017 N/a.00.0 N/a N/a N/a 00 8.00.00.0 10.00.00.0 00 8.00 7.00.0 10.00.00.0 1.7 0 N/a.0.0 N/a N/a N/a 00 0.00.0.0 10.00.00.0 8 080.00.80.00 11.00.00.0 1.00 081 N/a.80.00 N/a N/a N/a 0 000 8.00.00.00 11.00.00.0 1. 01 N/a.00.00 N/a N/a N/a 00 1.00.00.00 11.00.00.0 1.70 0 N/a.00.00 N/a N/a N/a 00.00.00.00 11.00.00.0 1.87 07 N/a.0.00 N/a N/a N/a 8 080.00.0.00 11.00.00.0 0 000 70.00.0.0 1.00.00.0.000 008 N/a.0.0 N/a N/a N/a 00 7.00 8.80.0 1.00.00.0 00 7.00 70.80.0 1.00.00.0.0 071 N/a 71.0.0 N/a N/a N/a 8 080 78.00 7.0.0 1.00.00.0 0 000 80.00 7.0.0 1.00.00.0.7 00 N/a 7.0.0 N/a N/a N/a 00 8.00 78.0.0 1.00.00.0.00 0 N/a 78.0.0 N/a N/a N/a 00 8.00 8.0.00 1.00.00.0. 0 N/a 8.0.00 N/a N/a N/a.70 08 N/a 87.0.00 N/a N/a N/a 70 0700.00 87.0.00 1.0.00.0.87 7 070 N/a 0.0.00 N/a N/a N/a 7 070 7.00.70.00 1.0.00.0.000 07 N/a.70.00 N/a N/a N/a 1

Wave Spring WS7 Characteristics Unbalanced Mechanical Seal. Independent of direction of rotation. STK WS7 is a positively, driven wave spring seal, utilising crest to crest wave spring technology, offering excellent axial movement capabilities. Designed to suit DIN0 (EN17). K Operating Limits p: <0 Bar ; V: <1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code K SLOT WIDTH SLOT DEPTH 1 010.00.00.00 10.00.00.00.00 1 010 7.00.00.00 10.00.00.00.00 18 0180.00.00.00 11.0 7.0.00.0 0 000.00.00.00 11.0 7.0.00.0 00 7.00.00.00 11.0 7.0.00.0 00.00 8.00 8.0 11.0 0.00.00.0 00 0.00.00 8.0 11.0 0.00.00.0 8 080.00.00 1.00 11.0.0.00.0 0 000.00.00 1.00 11.0.0.00.0 00 8.00.00 1.00 11.0.0.00.0 00 8.00 7.00 1.00 11.0.0.00.0 00 0.00.00 1.00 11.0.0.00.0 8 080.00.00 1.00 1.00.00.00.0 0 000 8.00.00 1.00 1.00.00.00.0 00 1.00.00 1.00 1.00.00.00.0 00.00 1.00 1.00 1.00.00.00.0 8 080.00.00 1.00 1.00.00.00.0 0 000 70.00.00.0 1.00 7.0.00.0 00 7.00.00.0 1.00 7.0.00.0 00 7.00 71.00.0 1.00 7.0.00.0 8 080 78.00 78.00 7.0 1.00.0.00.0 0 000 80.00 80.00 7.0 1.00.0.00.0 00 8.00 8.00 7.0 1.00.0.00.0 00 8.00 8.00 7.0 1.00.0.00.0 8 080 0.00 88.00.0 18.00.0.00.0 70 0700.00 8.00.00 18.00 0.00.00.0 7 070 7.00.00.00 18.00 0.00.00.0 80 0800 10.00 10.00 1.80 18.0 0.00.00.0 8 080 110.00 108.00 1.80 18.0 0.00.00.0 0 000 11.00 11.00.80 18.0.00.00.0 00 10.00 118.00 7.80 17.0.00.00.0 100 1000 1.00 1.00 7.80 17.0.00.00.0

Wave Spring WS7M Characteristics Unbalanced Mechanical Seal. Independent of direction of rotation. STK WS7M is a positively, driven wave spring seal, utilising crest to crest wave spring technology, offering excellent axial movement capabilities. Designed to suit DIN0 (EN17). K Operating Limits p: <0 Bar ; V: <1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code K SLOT WIDTH SLOT DEPTH 1 010.00.00.00 10.00.00.00.00 1 010 7.00.00.00 10.00.00.00.00 18 0180.00.00.00 11.0 7.0.00.0 0 000.00.00.00 11.0 7.0.00.0 00 7.00.00.00 11.0 7.0.00.0 00.00 8.00 8.0 11.0 0.00.00.0 00 0.00.00 8.0 11.0 0.00.00.0 8 080.00.00 1.00 11.0.0.00.0 0 000.00.00 1.00 11.0.0.00.0 00 8.00.00 1.00 11.0.0.00.0 00 8.00 7.00 1.00 11.0.0.00.0 00 0.00.00 1.00 11.0.0.00.0 8 080.00.00 1.00 1.00.00.00.0 0 000 8.00.00 1.00 1.00.00.00.0 00 1.00.00 1.00 1.00.00.00.0 00.00 1.00 1.00 1.00.00.00.0 8 080.00.00 1.00 1.00.00.00.0 0 000 70.00.00.0 1.00 7.0.00.0 00 7.00.00.0 1.00 7.0.00.0 00 7.00 71.00.0 1.00 7.0.00.0 8 080 78.00 78.00 7.0 1.00.0.00.0 0 000 80.00 80.00 7.0 1.00.0.00.0 00 8.00 8.00 7.0 1.00.0.00.0 00 8.00 8.00 7.0 1.00.0.00.0 8 080 0.00 88.00.0 18.00.0.00.0 70 0700.00 8.00.00 18.00 0.00.00.0 7 070 7.00.00.00 18.00 0.00.00.0 80 0800 10.00 10.00 1.80 18.0 0.00.00.0 8 080 110.00 108.00 1.80 18.0 0.00.00.0 0 000 11.00 11.00.80 18.0.00.00.0 00 10.00 118.00 7.80 17.0.00.00.0 100 1000 1.00 1.00 7.80 17.0.00.00.0

Wave Spring WS7B Characteristics Balanced Mechanical Seal. Independent of direction of rotation. STK WS7B is a positively, driven wave spring seal, utilising crest to crest wave spring technology, offering excellent axial movement capabilities. Designed to suit DIN0 (EN17). Operating Limits p: <0 Bar ; V: <1 m/s t: 0 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Seal Shaft Size Seal Size Code Seat Shaft Size SEAT SLOT WIDTH SEAT SLOT DEPTH 18 0180 1.00.00.0 10.00.00.00 0 000 1 7.00.00.0 10.00.00.00 00 18.00.00.0 11.0.00.0 00 0.00 8.00.0 11.0.00.0 8 080.00.00.00 11.0.00.0 0 000 0.00.00.00 11.0.00.0 00 8.00 7.00 8.0 11.0.00.0 00 0.00.00 8.0 11.0.00.0 8 080 8.00.00 8.0 11.0.00.0 0 000 0.00.00 8.0 11.0.00.0 00 8.00.00 8.0 1.00.00.0 00 0 8.00 1.00 8.0 1.00.00.0 0 000.00.00 8.0 1.00.00.0 00 8.00.00 8.0 1.00.00.0 00 0 70.00 71.00.0 1.00.00.0 0 000 7.00 80.00.0 1.00.00.0 00 0 80.00 8.00 7.0 1.00.00.0

Wave Spring H8 Characteristics Unbalanced Mechanical Seal. Independent of direction of rotation. The robust wave spring seal is ideally suited for standard, rotary lobe pump, glands, of compact design. The seal is positively driven by grub screws and supplied with Monolithic seal heads, in soft and hard face materials as our standard. Operating Limits p: <10 Bar ; V: <1 m/s t: 1 / +180ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Imperial Shaft Size Metric Shaft Size Size Code 018 8.0 7.00 1.10.0 1 010 8.0 7.00 1.10.0 011 1.70 0.00 1.10.0 00.0.10 1.10 7.0 0. 0.70 8 1.1 0 1.0 1.7 080.00.00 1.10 7.0 08 1.0.0 1.10 7.0 000.70 1.00 1.10 7.0 017.0.0 1.10 7.0 00.0.0 1.10 7.0 0 7.0.0 1.10 7.0 00 7.0.0 1.10 7.0 8 080.0 1.80 1.10 8.10 1.00 081.0 1.80 1.10 8.10 1.70 0 0.0 8.0 1.10 8.10 1.87 0 07.0 1.0 1.10 8.10 000.0 1.0 1.10 8.10.000 008.0.0 1.10.0.1 0 7.0 71.00.10.0 00 7. 71.00.10.0.0 0 7.00 7.00.10.0 00 7.00 7.00.10.0 00 8.00 7.0.80.10 0 88.0 7.0.80.10.00.70 08. 0.80.80.10.87 070 8..00.80.10 7.000 070 100.0.00.80.10 07 101.0.0.80.10 80 0800 10.00 101.00.80.10 00 1.00 11.00.80.10 100 1000 10.00 11.00.80.10

PTFE Seals PBP1 Characteristics Unbalanced Mechanical Seal. Independent of direction of rotation. External assembly. Bellow mechanical seal made of PTFE. Commonly used for strong corrosive fluids. Operating Limits p: <8 Bar ; V: <10 m/s t: / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Size d D D7 L L L 1 1.00.00.1 8.00 1.00.80 8.00 18 18.00.00.1 8.00 1.00.80 8.00 0 0.00 7.00. 1.00 1.00.80 8.00.00 7.00. 1.00 1.00.80 8.00.00 1.00.8.00.00.80 8.00.00 1.00.8.00.00.80 8.00 8 8.00 7.00 0.80.00.00 8.00 11.00 0 0.00 70.00.8 8.00 7.00 8.00 11.00.00 70.00.8 8.00 7.00 8.00 11.00.00 7.00 7.1 71.00 8.00 8.00 11.00.00 7.00 7.1 71.00 8.00 8.00 11.00 8 8.00 7.00.0 78.00 8.00 8.00 11.00 0 0.00 80.00.8 81.00 0.00 8.00 11.00.00 8.00.8 8.00 0.00 8.00 11.00.00 8.00.8 8.00 0.00 8.00 11.00 8 8.00 8.00 7.8 7.00.00.0 1.0 0 0.00 8.00 7.8 7.00.00.0 1.0.00 10.00 8. 100.00.00.0 1.0.00 107.00 8.7 10.00.00.0 1.0 8 8.00 110.00 88.0 10.00.00.0 1.0 0 0.00 110.00 88.0 10.00.00.0 1.0.00 11.00.08 110.00.00.0 1.0.00 11.00. 11.00.00.0 1.0 8 8.00 118.00 8. 11.00.00.0 1.0 70 70.00 118.00 8. 11.00.00.0 1.0 7 7.00 1.00 10.1 11.00.00.0 1.0 80 80.00 10.00 11.0 1.00 7.00.0 1.0 8 8.00 1.00 10. 18.00 7.00.0 1.0 0 0.00 1.00 17.00 1.00 7.00.0 1.0.00 1.00 17.00 1.00 7.00.0 1.0 100 100.00 1.00 1. 11.00 7.00.0 1.0 Size d D D7 L L L 0.70 1.00.00.1 8.00 1.00.80 8.00 0.87.0 7.00. 1.00 1.00.80 8.00 1.000.0 1.00.8.00.00.80 8.00 1.1 8.0 7.00 0.80.00.00 8.00 11.00 1.0 1.70 70.00.8 8.00 7.00 8.00 11.00 1.7.0 7.00 7.1 71.00 8.00 8.00 11.00 1.00 8.10 7.00.0 78.00 8.00 8.00 11.00 1. 1.0 80.00.8 81.00 0.00 8.00 11.00 1.70.0 8.00.8 8.00 0.00 8.00 11.00 1.87 7.0 8.00 7.0 87.00.00 8.00 11.00.000 0.80 8.00 7.8 7.00.00.0 1.0.1.0 10.00 8. 100.00.00.0 1.0.0 7.10 107.00 8.7 10.00.00.0 1.0.7 0.0 110.00 88.0 10.00.00.0 1.0.00.0 11.00.08 110.00.00.0 1.0..0 11.00. 11.00.00.0 1.0.70.80 118.00 8. 11.00.00.0 1.0.87 7.00 1.00 100.01 117.00.00.0 1.0.000 7.0 1.00 10.1 11.00.00.0 1.0.0 8.0 10.00 11.0 1.00 7.00.0 1.0.00 88.0 1.00 10. 18.00 7.00.0 1.0.70.0 1.00 17.00 1.00 7.00.0 1.0.000 101.0 1.00 1. 11.00 7.00.0 1.0

Characteristics PBP PTFE Seals Unbalanced Mechanical Seal. Independent of direction of rotation. External assembly. Bellow mechanical seal made of PTFE. Commonly used for strong corrosive fluids. Operating Limits p: <8 Bar ; V: <10 m/s t: / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Size d D D7 L L L 0.70 011.0.1 8.00.7.80 8.00 0.87 0.7. 1.00..80 8.00 1.000 0 7.1.8.00..80 8.00 1.1 08 0. 0.80.00.7 8.00 11.00 1.0 017.8.8 8.00 8.8 8.00 11.00 1.7 0.8 7.1 71.00 8.8 8.00 11.00 1.00 081 7.0.0 78.00. 8.00 11.00 1. 01 7.0.8 81.00. 8.00 11.00 1.70 0 7.8.8 8.00. 8.00 11.00 1.87 07 8.7 7.0 87.00. 8.00 11.00.000 008 88.0 7.8 7.00..0 1.0.1 0.08 8. 100.00.8.0 1.0.0 071. 8.7 10.00.8.0 1.0.7 00 8. 88.0 10.00.8.0 1.0.00 0 101.0.08 110.00.8.0 1.0. 0 10.78. 11.00.8.0 1.0.70 08 107. 8. 11.00.8.0 1.0.87 070 111.1 101.01 117.00.8.0 1.0.000 07 11.0 10.1 11.00.8.0 1.0.0 08 17.00 11.0 1.00.8.0 1.0.00 088 1. 10. 18.00.8.0 1.0.70 0 1.70 17.00 1.00.8.0 1.0.000 101 1.0 1. 11.00.8.0 1.0 7

PTFE Seals PBP0 Characteristics Unbalanced Mechanical Seal. Independent of direction of rotation. External assembly. Bellow mechanical seal made of PTFE. Commonly used for strong corrosive fluids. Operating Limits p: <8 Bar ; V: <10 m/s t: / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Size d D D7 L L L 0.87 0.0. 1.00.0.80 8.00 1.000 0 7.1.8.00.7.80 8.00 1.1 08 0. 0.80.00 8.8 8.00 11.00 1.0 017.8.8 8.00 8.8 8.00 11.00 1.7 0.8 7.1 71.00 8.8 8.00 11.00 1.00 081 7.0.0 78.00 8.8 8.00 11.00 1. 01 7.0.8 81.00. 8.00 11.00 1.70 0 7.8.8 8.00. 8.00 11.00 1.87 07 8.7 7.0 87.00. 8.00 11.00.000 008 88.0 7.8 7.00..0 1.0.1 0.08 8. 100.00.8.0 1.0.0 071. 8.7 10.00.8.0 1.0.7 00 8. 88.0 10.00.8.0 1.0.00 0 101.0.08 110.00.8.0 1.0. 0 10.78. 11.00.8.0 1.0.70 08 107. 8. 11.00.8.0 1.0.87 070 111.1 100.01 117.00.8.0 1.0.000 07 11.0 10.1 11.00.8.0 1.0.0 08 17.00 11.0 1.00.8.0 1.0.00 088 1. 10. 18.00.8.0 1.0.70 0 1.70 17.00 1.00.8.0 1.0.000 101 1.0 1. 11.00.8.0 1.0 8

Characteristics Unbalanced Mechanical Seal. EB18 Water Pump Seals Dependent on direction of rotation. Enclosed rubber bellow seal, with short axial fitting length, ideal for equipment where space is restricted. Operating Limits p: < Bar ; V: <10 m/s t: 0 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. Metric Shaft Size Size Code 8 0080.00.00 11.00 8.00 8* 0080.A 17. 0.00 11.00.80 8* 0080.C 1. 0.00 11.00.00 10 0100.00.00 11.00 8.00 11 0110.00.00 11.00 8.00 1 010.00.00 11.00 8.00 1* 010.B.00.00 1.00 8.00 1* 010.C.00.00 1.00 8.00 1* 010.D.00.00 11.00.0 1* 010.F.0.00 11.00.0 1* 010.G.00.00 1.00.0 1 010.00.00 1.00 8.00 1* 010.C.00.00 1.00.0 1 010.00.00 1.00 8.00 1* 010.A 8.00.00 1.00 8.00 1* 010.B.0.00 1.00 7. 1* 010.C.00.00 1.00 7.0 1 010 8.00.00 1.00 8.00 1* 010.B.0.00 1.00 7. 1 010 8.00.00 1.00 8.00 1* 010.B.00.00 1.00 8.00 1* 010.D.0.00 1.00 7. 17 0170.00.00 1.00 8.00 18 0180.00.00 1.00 8.00 1 010.00.00 1.00 8.00 0 000.00.00 1.00 8.00 0* 000.A.00.00 17.00 7.0 0* 000.B.00.00 1.00 10.00 0* 000.F.00.00 1.00 7.0 00.00.00 1.00 10.00 00 0.00 7.00 1.00 10.00 00 0.00 7.00 1.00 10.00 * 00.B.00.00 1.00.00 00 0.00 7.00 1.00 10.00 * 00.A 0.00.00 1.00 10.00 * 00.B.0.00 1.00 8.00 7 070 0.00 7.00 1.00 10.00 8 080 7.00.00 1.00 10.00 0 000 7.00.00 1.00 10.00 00 7.00.00 1.00 10.00 00.00 0.00 1.00 10.00 8 080 8.00.00 17.00 1.00 0 000 8.00.00 17.00 1.00 00 7.00 70.00 0.00 1.00 0 000 88.00 8.00.00 1.00 00 88.00 8.00.00 1.00 0 000 110.00 10.00 0.00 1.00 00 110.00 10.00 0.00 1.00 70 0700 110.00 10.00.00 1.00

Water Pump Seals P0/ Characteristics Unbalanced Mechanical Seal. Dependent on direction of rotation. Sleeve mounted, rubber bellow seals of compact unitised design. Suitable for small shaft diameter, general low pressure applications. Operating Limits p: < Bar ; V: <10 m/s t: 1 / +10ºC *Temperature is based by material selection. *Operating limits are based on PV factor. STK P0 Imperial Shaft Size Size Code Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.7 00 0.87. 0.7.80 0.1 1.0 0..0 0.00 017 1.000.0 1.0.7 0. 1.0 0..0 0. 018 1.0 1.7 1.18 0. 0.77 18.71 0.0 10. 0.70 011 1.7. 1..11 0.77 18.71 0.0 10. 1.000 0 1. 1.8 1.7.00 0.81 0. 0.7 11.10 STK P Imperial Shaft Size Size Code Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.7 00 1.000.0 1.0.7 0. 1. 0.1 7. 0.00 017 1.000.0 1.0.7 0. 1. 0.1 7. 0. 018 1.0 1.7 1.18 0. 0.718 18. 0.0 10.1 0.70 011 1.7. 1..11 0.718 18. 0.0 10.1 1.000 0 1. 1.8 1.7.00 0.81 0. 0.7 11.10 70

Characteristics Unbalanced Mechanical Seal. P70/7 Water Pump Seals Dependent on direction of rotation. Sleeve mounted, rubber bellow seals of compact unitised D D design. Suitable for small shaft diameter, general low pressure applications. Operating Limits p: Bar ; V: 10 m/s t: 1 / +80ºC *La temperatura viene condicionada por la selección de materiales. *Los límites operativos están condicionados por el factor PV. STK P70 Imperial Shaft Size Size Code D D Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.00 017 0.8.00 1.1 8. 0. 1.0 1.8 1.70 0.0 1.0 0.17.00 0. 018 1.0 1.00 1.. 0.717 18.0 1. 1.7 0.8 1.80 0.17.00 0.70 011 1.78.00 1.7 0.00 0.8 1.0 1.70.70 0.10 1.0 0.17.00 1.1 08 1.80 8.00.07.00 1.0 1.00.0 7.1 0.78 1.00 0.1 8.00 STK P7 Imperial Shaft Size Size Code D D Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric 0.00 017 1.000.0 1.1 8. 0. 1.0 1.8 1.70 0. 1.7 0.1 7. 0. 018 1.0 1.7 1.. 0.717 18.0 1. 1.7 0.0 1. 0.0 10.1 0.70 011 1.7. 1.7 0.00 0.8 1.0 1.70.70 0.0 1. 0.0 10.1 71

O.E.M. Seals

O.E.M. STK 1 to suit AFP series pumps seals for A.B.S. pumps Elastomeric bellow seals for lower position in many common submersible pumps, including AFP ranges. Each is supplied with a backwasher, unless stated. Commonly paired with either STK 8, STK 177 or STK 1 upper seals, details of which are below. For identification purposes, please crossreference the O.E.M. part number shown below, or enquire. The first table shows those size assemblies stocked and supplied with a Boot Mounted Stationary. Whilst the second table shown is for those with an O Ring Mounted Stationary. Stramek standard sizes SHAFT SIZE SIZE CODE O.E.M. part Number 1.00 010.00 8.00 17.00.00 1111017 0.00 000.00.00 1.0 7.0 11110001.00 00 0.0 1.00.0 8.0 111100 0.00 000 0.80 7.00.00.0 111100 0.00* 000.B 8.00 0.00.0 11.00 111101.00 00.0.0 0.0 1.0 111100.00* 00 7.0 78.00 7.0 1.0 111101 80.00 0800 10.00 10.0 0.00 1.00 1111001 Stramek standard sizes SHAFT SIZE SIZE CODE O.E.M. part Number 0.00 000 8.00 0.00.0 11.00 111100 8.00 080 7.00.00 0.0 10.00 1111000.00 00 8.00 0.00.00 1.00 1111000 0.00 000 11.00 1.00.0 1.00 111100 100.00 1000 1.0 10.00.00 1.0 111100 STK 1P (Upper Seal) STK 80 (lower Seal).0.0 Upper and lower mm shaft size seals for use together, but available separately, to suit various A.B.S. submersible pumps, including certain JUMBO, SP and RP series, which were previously supplied as the Pumpex brand. STK 8 to suit af and piranha series pumps Rubberencased upper seals primarily for PiranhaM or S range submersible pumps. The lower seal is normally mm or 0mm STK 1 seal, detailed above. For identification purposes, please crossreference the O.E.M. part number, or enquire. SHAFT SIZE SIZE CODE O.E.M. part Number.00 00.00 1.0 1.00.00 1110007 & 8 0.00 000 7.00 1.0 1.00.0 111000 7

seals for A.B.S. pumps Stramek offer a wide range of seals to suit A.B.S. pumps and mixers, especially submersible pumps. O.E.M. STK 177 to suit afp series pumps Elastomer diaphragm seals with sinusoidal wavesprings. 0mm size is routinely used as upper seal in certain AFP range submersible pumps, with mm STK 1 as the lower seal. The mm STK 177 is a low er seal, and is normally paired with the mm STK 1. For identification purposes, please crossreference the O.E.M. part number shown below, or enquire. SHAFT SIZE W SIZE CODE O.E.M. 0.00 000 7.00.10 1.00 10.00 1110008.00 00 8.00 8.0 7.00 1.00 1111017 STK 178 to suit Kseries pumps DB Da Elastomer diaphragm seals with sinusoidal wavesprings, supplied as upper and lower seals, ready mounted on a shaft sleeve, for installation directly into the bellchamber style housing of A.B.S. / Pumpex K series pumps. For mm, mm or mm shaft sizes, please enquire. SHAFT SIZE SIZE CODE Da Db 0.00 000.00 0.00 STK 1 to suit afp series pumps O Ring mounted wavespring seals, routinely utilised in the upperposition of AFP series submersible pumps. The lower seal will normally be of STK 1. For identification purposes, please crossreference the O.E.M. part number, or enquire. SHAFT SIZE NB: SHAFT SIZE 0mm (image above) HAS BOOT MOUNTED STATIONARY SIZE CODE O.E.M. 0.00 000.00 1.00 1.0.00 111000 8.00 080 7.00.00 1.80 1.0 1110008.00 00 8.00 7.00 17.80 1.0 111000 80.00 0800 10.00 8.00 1.0 1.0 111000 0.00 000 11.00 10.00 1.0 1.0 111000 100.00 1000 1.00 11.00 1.00 17.10 111000 7

O.E.M. seals for ALLWEILER pumps Stramek manufacture and stock a wide range of seals to suit Allweiler pumps, including many standard range seals, such as the STK 8DIN and 8DINS, STK RD and STK WS7 seals. The following are examples of specific dimensions seals designed to suit the internal dimensions of certain Allweiler pumps only. STK 8W to suit BAS, SPF, ZAS and ZASV series pumps O Ring mounted conical spring seals with distinctive stationaries, to suit the seal chambers of BAS, SPF, ZAS and ZASV series spindle or screw pumps, commonly found in ship s engine rooms on oil and fuel duties. Clockwise rotation springs are standard. STK 8X to suit sob and soh series pumps SHAFT SIZE SIZE CODE 1.00 010 8.00.00 1.00 8.00 0.00 000.00 1.00 1.0 8.0 O Ring mounted conical spring mm seals with distinctive gasket mounted seat rings, to suit SOB and SOH series pumps, commonly found in ship s engine rooms. Clockwise rotation springs are standard. SHAFT SIZE SIZE CODE.00* 00.00.00 1.0 11. STK 8A to suit l and lv series pumps O Ring mounted conical spring, stepped shaft, balanced seals with O Ring mounted stationaries, to suit specific dimensions of commonly marineapplication L and LV series pumps. LV pumps have vertical shafts and only require one clockwise rotation seal, but L series are horizontal, doubleended pumps and require one clockwise and one anticlockwise seal per pump. SHAFT SIZE SIZE CODE 8.00* 00.00.00.0 8. 0.00* 00.00.00.0.0.00* 000.00.00.00.0 Stramek STK 18 seals to suit ANDRITZ pumps Many Allweiler pumps accept Stramek standard range seals, such as Types 8DIN and 8DINS. Some of the seals, are detailed here or in earlier sections of the catalogue, if you can not find what you require, please contact us with the O.E.M. details for crossreference on our database. O Ring mounted rubber bellow seals to DIN0 / EN17 dimensions, but with a balanced rotary face profile and special stationary profiles, to suit service in Andritz S series centrifugal pumps, commonly found in paper and cellulose processing. SHAFT SIZE SIZE CODE 8.00 080.00 7.0.00.00 8.00 080.00.00.00.00.00 00 7.00 7.00.0 11.00.00* 00 8.00 0.00 1.0 11.00 0.00* 000 11.00 1.00 1.00 1.00 7

Stramek offer a wide range of seals to suit Ebara pumps, especially European models, including many standard range seals such as the STK CS, CSDIN and STK CS seals. The following are specific dimension seals designed to suit the internal dimensions of certain Ebara pumps. STK 18 to suit evm and evmw series pumps seals for EBARA pumps Rubberbellow seals with boot mounted stationaries and Stainless Steel spacerrings, to suit internal dimensions of Ebara EVM and EVMW vertical multistage pumps. O.E.M. SHAFT SIZE SIZE CODE 0.00 017.00.00 1.00 8.0 1.00 010.00 7.10 17.00 10.00 0.00 000.00.00 1.0 11.0 8.00* 080.00 7.00.0 10.00 STK 0A to suit best, right and dw series pumps Rubber diaphragm doubleended seals with boot mounted stationaries, to suit the internal dimensions of Ebara Best, Right and DW series, small submersible pumps. This common seal STK is also utilised by other pump manufacturers for small portable submersible pumps. SHAFT SIZE SIZE CODE 1.00 010 0.00 0.00.00.00 1.00 010 0.00 0.00.00.00 1.00 010 0.00 0.00.00.00 seals for EUREKA pumps STK 77 to suit cg series pumps Stramek manufacture and stock a variety of standard range seals to suit various Eureka pumps (now part of Hamworthy, formerly ThuneEureka ). STK 77 is an elastomer diaphragm seal, with reverse taper seal to specifically suit the CG series centrifugal pumps, widely used in marine applications. STK 78 to suit cac, cav and cax series pumps SHAFT SIZE SIZE CODE O.E.M. REF..00 00 7..00.00 11. CGA.00 00.8.00 1.0 11. CGB 1.00 010 0..0.0 11. CGC 8.00 080.70.00 8.0 11. CGD.00 00 7.0 70.00 1.00 1.0 CGE Elastomer diaphragm seals to./8 shaft size, with extended taper coil, to suit internal dimensions of Eureka CAC, CAV and CAX series centrifugal pumps, widely used in marine applications. SHAFT SIZE SIZE CODE.7 00 7.0 8.00 8.0 1.0 77

O.E.M. STK 1 to suit driprime series pumps seals for GODWIN pumps Stramek manufacture and stock a range of specific seal Types to suit Godwin Dri Prime pumps, in materials suitable for all clean and dirty water transfer duties. 0mm and 0mm sizes normally operate as single seals. Please contact is if you require 0mm size seals. SHAFT SIZE SIZE CODE 0.00 000.0.00.00 7.0 0.00 000 8.0 71.00.00 1.00 The STK 1 is a robust heavyduty design for more abrasive medias, for lower solid content fluids, the STK 17P can be used, please see details below. STK 1D to suit driprime series pumps D For larger DriPrime pumps with 7mm shaft sizes, a double seal is required. The most common arrangement is directly replaced by the Stramek STK 1D, which shares a similar construction to the STK 1 but with an additional singlespring component seal assembly to seal the oilbath. L For all Godwin pumps, please contact us with the O.E.M. details for crossreference and identification. SHAFT SIZE SIZE CODE D L 7.00 070 10.0 8.00.0 1.0 7.00 Types 17P and 17P to suit driprime series pumps Stramek Types 17P and 17P are designed to suit smaller models of DriPrime pumps, and offer an easy to install elastomer bellow seal that is designed to suit the length of the seal chamber, removing the need to set the seal on the shaft with set screws. STK 17 uses a standard Stramek rotary, STK 17 has the same design but with a reduced working length. For a heavyduty alternative design, please see the STK 1 detailed at the top of the page. SHAFT SIZE SIZE CODE Stramek STK 0.00 000.0.00.00 7. 17P 0.00 000.0.00.0 10.0 17P 78

seals for GRUNDFOS pumps Stramek manufacture and stock a wide range of standard range and specific seal Types to suit all Types of Grundfos pumps, including former Sarlin submersible pumps and Hilge sanitary pumps. Stramek seals for Grundfos Hilge sanitary pumps are dealt with in the following Food and Dairy Seals section. Please contact us with the O.E.M. details and part numbers for crossreference and identification, if your requirement is not shown. O.E.M. STK 1G Seals to suit Grundfos pump ranges Stramek manufacture and stock STK 1G elastomer bellow seals designed to replace the Grundfos seal styles A and B with a single, superior performing and easier to install seal design, in the majority of their centrifugal pump ranges. SHAFT SIZE SIZE CODE 1.00 010.00.00.0 1.00 1.00 010 7.00 8.00 8.0 1.0.00 00 7.00.0 0.00 11.10.00 00 8.00 1.00.00 7.0 STK 1 1mm Seals to suit CPSeries pumps Stramek manufacture and stock 1mm elastomer bellow seals with spacer and clamp ring to suit the Grundfos CP series pumps. Widely utilised in building service applications. SHAFT SIZE SIZE CODE 1.00 010 1.0 8.0 1.0 10.0 STK 1 mm Seals to suit LPSeries pumps Stramek manufacture and stock mm elastomer bellow seals with special profile boot mounted seats to suit Grundfos LM, LP, LPD and LPE series pumps. Widely utilised in building service applications. SHAFT SIZE SIZE CODE.00 00 7.00.00.00 1.00 Type GRXA Seal to suit CRSeries pumps Stramek manufacture and stock 1mm, 1mm and mm STK GRXA pushfit semicartridge seals to replace Grundfos H code seals installed in CR, CRI, CRIE series vertical multistage pumps and CR1SF models. STK GRXA are intended for all standard clockwise rotation pumps. 7

O.E.M. seals for GRUNDFOS pumps The following Types are designed for Grundfos submersible pump ranges formerly branded as Sarlin. STK 81 Seals to suit SSeries submersible pumps Stramek manufacture and stock O Ring mounted conical spring seals with positive drive, specifically designed to suit Grundfos S series pumps, with the older generation seal style installed. The O.E.M. older style seal is a conical single spring seal. For newer style seals, being multiplespring, please see Types 0S8 and, at the foot of this page. SHAFzT SIZE SIZE CODE.00 00 8.00.00.0 10.00.00 00 8.00.00 8.0 11.00 8.00 080.00.00.0 11.0 STK 8 Seals to suit SE and SVSeries pumps Stramek manufacture and stock O Ring mounted double seals with varying face profiles, specifically designed for Grundfos SE and SV series submersible pumps. Each size has a unique face profile, particularly relating to the central rotary face. Inboard seal and stationary faces are Monolithic Silicon Carbide, whilst the oilbath side stationary is Monolithic Carbon. DIAGRAM SHAFT SIZE SIZE CODE STK CODE D A 1.00 010 8B 8.00.00 0.00 B 1.00 010 8 8.00.00 0.00 C.00 00 8 8.00.00 0.00 D.00 000 8 8.00.00 0.00 E 8.00 080 8.00.00.0 A C e D D D B d STK 0S8 and Seals to suit S Series pumps Stramek manufacture and stock O Ring mounted multispring, balanced seals, specifically designed for Grundfos S series submersible pumps; upper and lower positions. STK 0S8 is for the upper, oil bath position, and STK with the distinctive stationary profile, is for the lower, impeller position. mm Size STK lower seal has a distinctive extended barrel with two O Rings to seal inside impeller recess, as per the original O.E.M. seal. STK 0S8 SHAFT SIZE SIZE CODE STK CODE 8.00 080 0S.00.00.00 11.00 0.00 000 0S8 70.00.0.0.0.00 00 0S8 8.00 8.0.0 11.00 STK Please refer to our extensive O.E.M. Database in our Web Portal or contact us with the O.E.M. details or part numbers for crossreference and identification. SHAFT SIZE SIZE CODE.00 00 8.00.00.00 11.00 8.00 080.00.00.00 11.0 0.00 000 70.00.0.0 1.00.00 00 8.00 8.0.00 1.00 80

Stramek STK 8 To Suit Haigh Macerators seals for HAIGH / I.M.O. Stramek manufacture and stock 1.1/ rotaries, and 1./ complete seals, to suit Haigh macerators. Rotaries have Carbon faces with Nitrile elastomers, complete seals have a NiResist cast iron stationary with a Nitrile O Ring. O.E.M. SHAFT SIZE SIZE CODE 1.00 017 N/A 7.0 N/A 1.70 0 7.00 70.00 7.0 Stramek STK 10 To Suit Haigh Macerators Stramek manufacture and stock mm complete multispring O Ring mounted seals with O Ring mounted seats to suit Haigh macerators. SHAFT SIZE SIZE CODE.00 00.00.00 0.1 1.10 Stramek STK 18 To Suit I.M.O. Pumps Stramek STK 10 To Suit I.M.O. Pumps D Stramek Seals To Suit I.M.O. Pumps SHAFT SIZE SIZE CODE D.00 00.00.00 8.00.0 Stramek manufacture and stock a wide range of standard dimension seals to suit I.M.O. pumps, commonly found in marine applications. To replace the fivepart O.E.M. seal supplied for ACE series pumps, generations and above, Stramek have designed the following seals, which offer a standard configuration seal with a rotary and a stationary, which is far easier to install than the original O.E.M. seal. To replace O.E.M. seal Types T and Q please use Stramek STK 18. To replace O.E.M. seal Types U and V please use Stramek STK 10. For other I.M.O. requirements, please contact us with details. Stramek STK 1 To Suit Kolmeks Pumps Stramek manufacture and stock a range of rubber bellow seals with distinctive O Ring mounted stationaries, to suit Kolmeks A, L, N and T series circulating pumps. These pumps are also seen with other brand names, such as Armstrong, Pullen and I.T.T. Flygt. SHAFT SIZE SIZE CODE 1.00 010..00.0.0 18.00 0180 0.1.00.0 8.00.00 00.7.00.0 8.00.00 00.00.00 0.1 8.0 0.00 000 8.00.00.00.00 81

O.E.M. STK R1 seals for HIDROSTAL pumps Stramek standard STK R1 diaphragm seals to replace O.E.M. C and V STK seals. NB: Size code 00 is a STK 0 not our STK R1. These seals are fitted in the inner oil bath position. Product side seals are either a rubber bellow STK seal, as per our STK 1, shown below. Or rubber encased seals which can be replaced by our STK 1, as detailed below. SHAFT SIZE d1 d l1 l O.E.M. SEAL Size Imperial Metric Code Imperial Metric Imperial Metric Imperial Metric Imperial Metric CODE 0.87. 0 1.00 8.10 1.1.00 0.7.80 0.0 10.8 C0., V0. 0.8.00 00 1. 0.0 1..00 1.000.0 0.0 10. C0 1.1 8.8 08 1.70. 1.8.00 1.0.7 0.7 11.10 C1.1, V1.1 1.7. 0.000 0.80.071.00 1.1 8.8 0.7 11.10 C1. 1.00 8.10 081.1.8.17.800 1.1 8.8 0.7 11.10 C1..000 0.80 008.70.8.87 7.000 1.00 8.10 0.00 1.70 C.0.00.0 0.7 8.7. 8.00 1.81.0 0. 1.8 C..000 7.0 07.87 8..0 10.700.0.7 0. 1.88 C.0 STK 1 Stramek STK 1 robust rubber bellow seals to replace O.E.M. G STK seals. Seal sizes from 08 and up are supplied with steel backwasher, to separate the seal bellow from the shaft circlip. Size code 000 to replace O.E.M. G00K is standard Stramek STK EBG1 seal. Usually fitted in tandem with our STK R1 seals, detailed above, or our STK 1 seals, shown below. SHAFT SIZE Size d1 d l1 l O.E.M. SEAL Imperial Metric Code Imperial Metric Imperial Metric Imperial Metric Imperial Metric CODE 0. 1.88 018 1.187 0.1 1.10 8.00 0.87. 0.0 10.8 G01, M0. 0.787 0.00 000 1.00 8.10 1.17.00 1.181 0.00 0. 10.00 G00 0.787 0.00 000 1.78.00 1. 0.0 0.8 1.0 0. 7.0 G00K 1.1 8.8 08 1.70. 1.80 7.00 1.0.7 0.7 11.10 G1.1 1.00 8.10 081.1.8.8 8.00 1.1 8.8 0.7 11.10 G1..000 0.80 008.70.8.7 71.00 1.00 8.10 0.00 1.70 G.0.00.0 0.7 8.7. 0.00 1.81.0 0. 1.8 G..000 7.0 07.87 8..01 10.00.0.7 0. 1.88 G.0.70.00 00.87 1.8.17 11.00.7 0. 0.7 1.10 G0.7* 100.00 1000.87 1.8.17 11.00.7 0. 0.7 1.10 G100 STK 1 Stramek STK 1 is a unitised, highly robust, balanced multispring seal to replace O.E.M. M and X STK seals. STK 1 is designed to replace the singlespring rubberencased O.E.M. seals, that can often fail when the rubber loses its bond with the seal faces and metal parts. Seal size 00 has an O Ring STK stationary, not boot mount. Usually fitted in tandem with either our STK 11 or STK 1 seals, shown above. SHAFT SIZE Size code d1 d l1 l O.E.M. SEAL CODE 1.1.8 08 1.70. 1.7.00 1.181 0.00 0.1 8.10 M1.1 Imperial Metric Imperial Metric Imperial Metric Imperial Metric Imperial Metric 1.00 8.10 081.1.8.17.80 1. 1.0 0.1 8.10 M1..000 0.80 008.70.8.1 7.0 1.00 8.10 0.00 1.70 M.0, X.0.00.0 0.7 8.7.08 78.0 1.81.0 0. 1.8 M., X..000* 7.0 07.87 8..8.70.0.0 0. 1.88 M.0, X.0.70.00 00.87 1.8.0 18.00.77.0 0. 1.0 X0 8

seals for LOWARA pumps Stramek offer a wide range of seals to suit I.T.T. Lowara pumps, especially centrifugal circulation pumps. Many I.T.T. Lowara pumps use standard range seals, especially STK CS and STK CSDIN, the following Types are specific dimension seals to suit certain ranges where a standard seal cannot be installed. For other I.T.T. Lowara requirements, please contact us with details. O.E.M. STK 10 to suit fc, fh and sh series pumps Stramek manufactures a range of O Ring mounted conical spring seals to EN17/DIN0 K dimensions, to suit FC, FH, SH series pumps. SHAFT SIZE SIZE CODE 1.00 010.00.00.0 7.00.00 00 7.00.00 7.0 10.00 8.00 080.00.00.0 10.00.00* 00 8.00.0.0 10.00 STK 11 to suit ce and co series pumps Stramek manufacture and stock a 1mm STK 11 seal to suit the reduced length seal chamber of various circulating pumps, such as CE and CO ranges with newer A suffix motors. The STK 11 is the same dimensions to Stramek STK CS, except for the reduced rotary working length. SHAFT SIZE SIZE CODE 1.00 010.10.00 1.0.00 STK 1 to suit sv and svi series pumps Stramek manufacture and stock a range of O Ring mounted, robust conical spring seals to EN17 / DIN0 K dimensions, to suit SV and SVI series pumps. 1mm and 1mm also suit certain esv series models SHAFT SIZE SIZE CODE 1.00 010.00 1.00.0 7.00 1.00 010 7.00.00 8.00 7.00.00 00 0.00.00 0.00 10.00 STK 1 to suit esv series pumps Stramek manufacture and stock a 0 / 18mm stepbalanced, O Ring mounted, robust conical spring seal with positive drive from the coil, to suit certain models of esv series pumps. Stramek Stock Codes; W000.1.R.V.R. SiC vs SiC W000.1.R.V.SC. SiC vs Carbon SHAFT SIZE SIZE CODE 1.00 000.0.0.00 7.00 STK 8 to suit sv and esv series pumps Stramek manufacture and stock a /mm stepbalanced, O Ring mounted, robust single spring seal with positive drive from three drive studs on the coil base, to suit larger models of SV and esv series pumps. Stramek Stock Code; W00.8.E.S. SiC vs SiC SHAFT SIZE SIZE CODE.00 00 7.00.00 8.00 7.00 8

O.E.M. seals for K.S.B. pumps Stramek offer a wide range of seals from stock and to special order, to suit K.S.B. equipment, especially centrifugal and wastewater pumps. Please contact us with O.E.M. details for cross reference and identification. STK 17B to suit eta and sy series pumps Stramek manufacture and stock O Ring mounted conical spring rotaries with STK EBG1 boot mounted stationaries, to give operating dimensions to EN17/ DIN0 N, for ETA series pumps with SY, SYA, SYN, or SYT designations. These seals are available from stock in materials especially suitable for hot water duties. SHAFT SIZE SIZE CODE 8.00 080.00 0.00.0 7.0 8.00 080.00.00.00.00 8.00 080.00.00 1.00.00 STK 1K to suit eta series pumps Stramek manufacture and stock a range of elastomer bellow seals to suit the common Types of K.S.B. ETA series centrifugal pumps commonly found thoughtout the fluid industry. Contact us with O.E.M. details for cross reference and identification. SHAFT SIZE SIZE CODE 1.00* 010 7.00.00.0 1.10.00 00 7.00.00.0 1.10 8.00 080.00 7.00.0 1.0 8.00 080.00 8.00.00 1.0 8.00 080.00.00 0.0.0 STK 17 to suit ama, krt, and sewa series pumps Stramek manufacture and stock a range of elastomer bellow seals to suit the specific dimensions of K.S.B. AMA, KRT and SEWA series wastewater pumps with SU prefix seals installed. mm size is commonly used in the oil bath position, with mm STK EBG1 in the outer position, mm sizes are used in pairs in the same pump series. 8mm is commonly used in Vitachrom pumps in tandem with STK 17B. STK 178Y to suit various k.s.b. pumps SHAFT SIZE SIZE CODE.00 00 8.00 1.00.00 7.0 8.00* 080.00 7.00.0.00.00 00 8.00 1.00 7.0 11.00 Stramek manufacture and stock two sizes of stepbalanced, O Ring mounted wavespring seals, with specific stationary design to replace O.E.M. seal STK H7G11. These seals are available from stock in materials especially suitable for hot water duties. D SHAFT SIZE SIZE CODE D 8.00 00.0 8.80 7.00 8.0.00.00 080.0.80.00 8.0.00 8

Stramek STK N to Suit National Oilwell Mission Magnum Pumps. Stramek hydraulically balanced elastomer diaphragm seals of.00 shaft size, with improved design to suit the adverse conditions associated with mud pumps, commonly found in oil extraction applications, such as drilling rigs. Stramek s design, specifically created for these applications provides the seal performance benefits of a machined head retainer, hydraulic balance and a full boot mounted seat. As O Ring mounted seats are less able to seal the frequently pitted, corroded housings. Stramek also supplies the replacement shaft sleeves to suit these pumps, on stock code 0. N.V.X.SLEE. SHAFT SIZE Size d1 d l1 l Imperial Metric Code Imperial Metric Imperial Metric Imperial Metric Imperial Metric seals for various pumps.00.0 0.7 8.7.10 81..00.0 0.7 1.0 O.E.M. Stramek STK 1 mm to Suit S.P.P. Pumps. Stramek manufacture and stock mm elastomer bellow seals with smoothboot stationaries, to suit the extended seal chamber of S.P.P. Eurostream centrifugal pumps, commonly associated with large building service applications, such as heating and fire systems. SHAFT SIZE SIZE CODE.00 00 8.00.00 0.00 7.0 Stramek STK 11 to Suit Sterling Sihi Pumps. Stramek manufacture and stock 8mm O Ring mounted conical spring seals, in clockwise and anticlockwise rotation, to suit the housing dimensions of common Sterling Sihi pumps. Stramek STK 0B to Tsurumi Pumps. SHAFT SIZE SIZE CODE 8.00 080.0.00.00.0 Stramek stocks many standard range seals to suit Sterling Sihi pumps, such as STK CS, STK CSDIN, STK EBG1S, STK H0 and STK WS7M. Please contact us with the O.E.M. details for cross reference and identification. D D Stramek manufacture and stock a range of elastomer diaphragm doubleended seals, with boot stationaries at oil side and bezel seats at impeller side, to suit the seal chamber of various Tsurumi submersible pumps. STK 0B seals are supplied complete with bezel plates for the inboard seat. SHAFT SIZE SIZE CODE D D P.C.D. 0.00 000 8.00.00 7.00 0.00 8.00.00.00 00.00 0.00 7.00 0.00 8.00.00 0.00 000 0.00 7.00 8.00 70.00 8.00.00.00 00 8.00.00.00 80.00.00.00 0.00 000.00 70.00 100.00 8.00.00.0.00 00.00 70.00 10.00 0.00.00.00 0.00 000 7.00 80.00 10.00.00.00.0 8

O.E.M. Stramek STK V to Suit Viking Pumps. VIKING / WILO pumps seals Stramek manufacture a wide range of differing elastomer diaphragm seals with O Ring or boot mounted stationaries, to suit the specific dimensions required by various Idex Viking pumps, of which the Stramek STK V 1.1/ shaft size is a common example. Please contact us with O.E.M. details for cross reference and identification, for any other seal assembly required for this popular brand of pumps. SHAFT SIZE Size d1 d l1 l Imperial Metric Code Imperial Metric Imperial Metric Imperial Metric Imperial Metric 1.0 1.70 017 1.87 7.0.07 1.0 1.000.0 0.81. Stramek STK 10 and 1 to Suit Wilo E.M.U. Submersible Pumps. Stramek manufacture and stock several standard range seals to suit Wilo E.M.U. Submersible pumps, as well as STK 10 and 1 seals to replace the O.E.M. EBU enclosedblock seals. D The Stramek STK 10 is a direct replacement for the oldergeneration EBS O.E.M. seals. Newer pumps have a slightly modified seal installed, which is directly replaced by the Stramek STK 1. Please check the outer dimensions of the seat housing for correct identification, utilising the table below, dimension. STK 10 is available as complete mechanical seal assemblies or in repair kit form. The kits comprise both stationary faces, with O Rings, central rotary with elastomer diaphragm, antirotation pins and springs for stationaries, and retaining pins for the collets. Specify.KIT as a suffix on the stock code. STK 10 Dimensions SHAFT SIZE SIZE CODE D.00 00 7.00 7.00 7.00 7.0 0.00 000.00 0.00.00.00 7.00 070 10.00 18.00.0 7.00 STK 1 Dimensions SHAFT SIZE SIZE CODE D.00 00 7.00 7.00.00 7.00 0.00 000.00 0.00.00.00 Stramek STK 11 to Suit Wilo Centrifugal Pumps. Stramek manufacture and stock two sizes of STK 11 elastomer bellow seals to suit common Wilo centrifugal pumps, commonly utilised in heating pumps applications. Stramek stocks the brass shaft sleeves the seals are mounted onto. Stramek also offers other standard range seals, such as 17mm STK EBG1, and 18mm, mm or mm STK EBG1 seals, to suit Wilo pumps. SHAFT SIZE SIZE CODE.00 00 0.80 1.00. 11..00 00 7.0 78.00 1.00 1.0 Brass Shaft Sleeves. Please use codes; 00.11.E.X.SLEE 00.11.E.X.SLEE For ordering relevant Shaft Sleeves 8

seals for compressors Stramek mechanical seals to suit refrigeration O.E.M. applications Stramek have extensive sealing experience within the refrigeration industry, and have developed a wide range of seals, with the specific elastomers and advanced face materials required to suit the refrigerants and synthetic lubricating oils the mechanical seals are routinely exposed to. As there are a wide range of compressor models, and generally each compressor has model specific seal arrangements, Stramek have developed many seal designs to suit compressor applications. The following list merely illustrates our main guaranteed stock lines. Please enquire with any other requirement. Furthermore, these seals can be installed in the equipment without any amendment to the existing housings or shafts. The Stramek designs, excellent materials, wide stock range and the ability to manufacture to any industry design or requirement, complement the Stramek Refrigeration Seal range. O.E.M. Stramek guaranteed exstock seal range A.P.V. Hall HS180 Screw Howden WRV Mk J & E Hall HS180 Screw Howden WRV0 Howden WRV Mk1 Sabroe TCM08 A.P.V. Hall V And 8 Howden WRV1 Cylinder A.P.V. Hall V Range Sabroe CM018 A.P.V. Hall V17 Range Sabroe CM0, 0 And 08 Bitzer F, F And G Sabroe SAB 18 Nonbellow Bitzer N, P, T And U Sabroe SAB 1 Nonbellow Bock AM And BFO Ranges Sabroe SMC100 To 10 Bock F And FK Ranges Sabroe TCM0, 0 And 08 Carrier 0K Sabroe TSMC108 To 1 Carrier 0G Sabroe VMY Carrier 0G Emergency Sabroe VMY Clutch Carrier 0H Sabroe VMY Carrier V0 Sabroe VMY Copeland, And Sabroe VMY7 Cylinder Copeland 8 Cylinder Sabroe VMY Daikin C, And 8 Sabroe VMY Cylinder Daikin C7, And 8 Stal P And PK Cylinder Dunham Bush Big Stal P Frick RDB Range Stal PK, PK8 Frick RWB Range Stal S0, S1, S And S7 Frick TDSH/GDSH Range Stal S70, S71, S7 And S7 Gram HC07 ThermoKing 0777 Seal Gram HC100 ThermoKing 0778 Seal Grasso RC Nonbellow ThermoKing 08 Seal Grasso RC11 Nonbellow ThermoKing 1100 Seal Howden WRV1 And ThermoKing 1101 Seal XRV1 Howden WRV0 Mk Vilter 0VMC to 0VMC Howden WRV0 Mk Vilter 0 With.00 Crank Howden WRV0 Mk Vilter 0 With.00 Crank Howden WRV0 Witt GP Pump Howden WRV Mk1 To F Witt GP1 Pump Stramek Seals for all of the above Compressor Models shown are Guaranteed ExStock. For further information and any other Types, please view our Web Portal and / or our Compressor Seal Price List, or enquire. Copeland CC Carrier 0G J & E Hall V Stal P 87

O.E.M. seals for ALFA LAVAL pumps Stramek make a wide range of seal parts for Alfa Laval equipment, please contact us with the O.E.M. details for crossreference and identification. STK 17B To Suit lkr Series Agitators Stramek manufacture and stock 0mm and mm rubberencased STK 17B seals to suit Alfa Laval LKR series agitators. SHAFT SIZE SIZE CODE D 0.00 000 0.80.80.00.0 11..00 00.8.00.00.0 11. STK 1C To Suit ALC Series Pumps Stramek manufacture and stock modified STK 1 style seals to suit Alfa Laval ALC series pumps, commonly utilised in food and dairy processes. For ALC pumps with flush housings, please see STK 0 on following page. STK 1C is available from stock in all three common elastomers, as well as FDA / E.C. Regulation compliant materials. SHAFT SIZE SIZE CODE 0.00 000 8.00 0.00 0.00 1.00.00 00 7.00 7.00.00 1.00 D Stramek seals to suit ALFA LAVAL CONTHERM scrapedsurface heat exchangers 1.1/ FLUSHSINGLE NONFLUSHSINGLE SHELLEND.TC FLUSHSINGLE.180/0 All components are supplied as standard with Nitrile O Rings, if any other elastomer is required, please just advise at time of order. A SHELLEND.TC.000 Outer Shaft rotary head, with Tungsten Carbide face A SHELLEND.CARB.000 Outer Shaft rotary head, with Carbon face B SHELLEND.COIL Coil to suit.000 Outer Shaft rotary head C C C FLUSHSINGLE.0 FLUSHSINGLE.180 NONFLUSHSINGLE.000 Outer Shaft flush housing, with ports at 0 Degrees, and chrome oxide face Same as above, but with flush ports at 180 Degrees.000 Outer Shaft flush housing, with ports at 0 Degrees, with chrome oxide face. D 1.1/.SHELLEND 1.00 Inner Shaft rotary head, with Carbon face. 0.80 8.10 E 1.1/.SHELLEND.COIL Coil to suit 1.00 Inner Shaft rotary head F 1.1/ FLUSHSINGLE 1.00 Inner Shaft stationary, with bolt holes to allow fixing to base of.000 flush housing. B A E D C F 88

Stramek manufacture and stock a wide range of seals to suit the common Alfa Laval centrifugal pumps, each of which is dealt with below. STK 0 (mm) STK 0mm complete seals, designed to suit all sizes of ALC pump, with the larger flushhousings fitted. For nonflushed ALC series pumps, the STK 1C seal is utilised, see previous page. x range for ALFA LAVAL pumps STK B (mm and mm) STK Bmm and mm complete seals, designed to suit LKH series pumps, with a flushed seal chamber see text O.E.M..00 STK D (mm and mm) STK mm & mm complete double seal, designed to suit LKH series pumps with a flushed seal chamber and double seals. STK 1B (mm) STK 1Bmm complete seal, designed to suit pump models FM0, FM0S, FM1A, FMA, FMA and FMA see text.00 STK (mm) STK mm complete seal for MR1A, MR1B and MR1E pumps. STK (7mm) STK 7mm complete seal, designed to suit pump models MR18A and MR00A STK (mm and mm) STK mm and mm complete seals, designed to suit LKH series pumps with standard seal chamber. For pumps with flushed seal chambers, please see Types B and D in the opposite column. 7.00 see text STK B (mm) STK Bmm complete seal, designed to suit pump models ME1AE, GM1, GM1A, GM and GMA MR1E STK 1 (mm and mm) STK 1mm and mm multispring seal kits, designed to suit LKHI, LKHP, LKHSP and LKH 100 series multistage series pumps. Please contact us for wearring and lip seals sets for these pumps..00.00 8

O.E.M. STK To Suit Alfa Laval TriClover Pumps seals for ALFA LAVAL pumps Stramek manufacture direct replacement rotary parts to replace the O.E.M. O Ring mounted, hydraulicallybalanced TypeD seals fitted to TriClover brand centrifugal pumps. Clamped stationaries with gaskets are also available to work with the STK rotary, to replace the O.E.M. TypeDG seals for those pumps with flushed seal chambers. Please contact us with your requirements. SHAFT SIZE Size Code Imperial Metric Imperial Metric Imperial Metric O.E.M. SEAL CODE 0.70 1.10 011 1.80 7.00 1..0 C11 1.1 8.0 08.1.00 1..00 C1 1.00 8.10 081..0 1.1.0 C18, C8 STK 18 To Suit Alfa Laval TriClover Pumps Stramek manufacture direct replacement repair parts for O.E.M. O Ring mounted, multispring seals fitted to TriClover brand Centrifugal 00 series pumps with the common Imperial 1.70 shaft size. The Stramek wear parts will interchange with the nonwearing parts, such as the drive ring and multiple springs, to allow rapid seal refurbishment and reassembly. Seal part codes are as follows; 0.18.V.S.FACE O Ring 0.18.X.S.STAT 0.18.V.X.BOOT Rotary Face with Stationary Seat Stationary Cup Boot SHAFT SIZE Size Code Imperial Metric Imperial Metric Imperial Metric O.E.M. SEAL CODE 1.70. 0.1 7.8 0.0 10. 0, 0, 08, 10 STK 1 To Suit MOG and ALP Lobe Pumps Stramek manufacture direct replacement wavespring O Ring mounted seals to suit Alfa Laval MOG and ALP series loberotor pumps. SHAFT SIZE SIZE CODE 1.187 000 1.70 1.00.0 1.00 1.7 0 7.0.7 0.0 1.80.000 008.0.0.80 1.00.000* 07.0 8.0.70 1.00 STK 180 To Suit LKPL, NMOG and SRU Lobe Pumps Stramek manufacture direct replacement wavespring O Ring mounted seals to suit Alfa Laval new generation lobe rotor pumps, such as LKPL, NMOG and SRU series, fitted with O.E.M. Hyclean style seals. For older generation pumps, see STK 18 on facing page. Further sizes are available, please contact us with your requirements. SHAFT SIZE SIZE CODE 1.187 000.0.00 1.0 1.0 1.7 00.00.00.00 1.00 1.81 00.0.00.00 1.00.187 00.00 7.00.0 17.00 0

seals for ALFA LAVAL & C.S.F. INOX pumps STK 18 To Suit LKPL, NMOG and SRU Lobe Pumps Stramek manufacture direct replacement wavespring O Ring mounted seals to suit Alfa Laval older generation lobe rotor LKPL, NMOG and SRU series, fitted with O.E.M. R0 style seals. For pumps with flush and double seals installed, see STK 1 detailed below. SHAFT SIZE SIZE CODE 0.00 000 0.00.0 0.00 10.0 0.00 000 1.0.00 1.0 11.10.00 00. 0.80.00 1.00.00 00 8..0.0 1.0.00 00. 7.00.0 1.0 7.00 070.1.0 1.10 1.0 O.E.M. STK 188W To Suit Alfa Laval SR Lobe Rotor Pumps Stramek manufacture STK 188W O Ring mounted wavespring seals to suit former S.S.P. brand SR series A& Gseries lobe rotor pumps. Further sizes are available, please contact us with your requirements. SHAFT SIZE SIZE CODE 0.00 000 0.00 1.00 1.10 10.70 0.00 000 1.0 1.00 1.10 10.0.00 00..0 1.10 1.0.00 00 8. 8.0 1.10 11.0.00 00. 7.00.10 1.00 7.00 070.1.00.80 1.0 STK 1 To Suit Alfa Laval SR Lobe Rotor Pumps Stramek manufacture STK 1 O Ring mounted wavespring double seals to suit former S.S.P. brand SR series lobe rotor pumps, designed for and fitted with flushed seal chambers and double seals. L SHAFT SIZE SIZE CODE L 0.00 000 1.0.0 10.0 11.10.00 00 8. 7.70 11.0 11.0.00 00..0 1.0 11.0 STK 1M To Suit C.S.F. Inox Pumps Stramek manufacture 8mm STK 1M O Ring mounted conical spring seals, to suit C.S.F. Inox AS and CS centrifugal pump ranges. Stramek also offers other seals to suit C.S.F. Inox pumps, including the STK 10 hygienic singlespring seals to replace the O.E.M. U or Y STK externally mounted seals. SHAFT SIZE SIZE CODE 8.00 080.00.0.00.0 1

O.E.M. 1 series for A.P.V. world pumps The A.P.V. W and W+ pump series have been introduced to replace the A.P.V. Puma pumps. Stramek manufacture and stock a comprehensive range of mechanical seals designed to suit these popular pumps, in single and double seal configurations. STK 1 Single seals to suit APV W Pumps Stramek manufacture mm and mm seals to suit A.P.V. World series pumps, with standard single seals. For pumps with flushed seal chambers and double seals, please see the STK 1 DOUB below. SHAFT SIZE SIZE CODE.00 00.00 8.0.0 1.00.00 00.0.0.0 1.00 STK 1.DOUB Double seals to suit APV W Pumps L Stramek manufacture mm and mm double seals to suit A.P.V. World series pumps, with flushed seal chambers and double seals installed. You can contact us with the O.E.M. details for crossreference and identification, should you require. SHAFT SIZE SIZE CODE L.00 00.00 8.0.0 17.00 1.00.00 00.0.0.0 0.00 1.00 STK 1.PLUS to suit APV W+ Pumps Stramek manufacture mm and mm face sets and faceholding kits to suit A.P.V. W+ series pumps. The STK 1.PLUS face sets include a Silicon Carbide short rotary face, a Carbon or Silicon Carbide long stationary (with four drive slots), two O Rings and one drive pin, to drive the rotary face. The static coil unit, with P.T.F.E. sleeve, is available as a separate part. Stramek STK 1.PLUS.KIT, in both mm and mm sizes, is also available in FDA grade materials as standard. SHAFT SIZE SIZE CODE.00 00 8.00 11.0 17.0.00 00 88.00 11.0 17.0 STK to suit APV agitators Stramek manufacture a 1.000 STK rubberencased seal to suit A.P.V. agitators, available as rotary part only, or as a complete seal with a STK stationary. For further sizes, please contact us with your requirements. SHAFT SIZE SIZE CODE 1.000 0 7. 8.0 1.8 11.

series for A.P.V. Puma pumps Stramek produce the entire range of seals and associated components commonly found on the 1.000 and 1.00 shaft A.P.V. Puma pumps, in single or double seal configurations. O.E.M. XXXX..N.C.SEAL XXXX..N.C.SEAT C b A L f XXXX..S.S.D D E SHAFT SIZE SIZE CODE L 1.000 0 1.0 8.0.0 7.80 1.00 1.00 081.70 80.10.0.00 17.00 Stramek STOCK CODES. Where XXXX is stated in the codes below, utilise 0 for 1.000 or 081 for 1.00 shaft size as required. If E.P. or Viton is required, replace the N with an E or V respectively. XXXX..N.C.GASK INTERNAL SEAL = A XXXX..N.C.SEAL STK O Ring mounted rotary with inserted Carbon face. XXXX..N.S.SEAL STK O Ring mounted rotary with inserted Silicon Carbide face. XXXX..N.H.SEAL STK O Ring mounted rotary with inserted Tungsten Carbide face. SEAT ARRANGEMENT ONE = B and C XXXX..S.S. STK Monolithic Stainless Steel stationary plate, lapped one side. XXXX..S.S.D. STK Monolithic Stainless Steel stationary plate, lapped both sides. XXXX..C.C.D. STK Monolithic Ceramic stationary plate, lapped both sides. XXXX..N.C.GASK Gasket set, with flat and Lshaped gasket, for above plate seat. SEAT ARRANGEMENT TWO = D and C XXXX..N.C.SEAT STK boot mounted Ceramic seat, inserted in a stainless steel adaptor. XXXX..N.S.SEAT STK boot mounted Silicon Carbide seat, inserted in a stainless adaptor. XXXX..N.C.GASK Gasket set, with a flat and Lshaped gasket, for above plate seat. ADDITIONAL DOUBLE SEAL COMPONENTS,FOR WATER JACKETED PUMPS, WITH EXTERNAL SEAL =E and F XXXX..S.S.PLAT STK Stainless Steel backing plate with flush connection holes. XXXX.18.N.C.SEAL STK 18 inboard rotary, with Nitrile bellow and Carbon face. XXXX..S.S.PLAT XXXX.18.N.C.SEAL ANCILLARY INFORMATION. All parts are fitted with Nitrile elastomers as standard. If E.P. or Viton are required, please specify this, by replacing N in the code with E or V. A Y Prefix to the code, denotes F.D.A. / E.C. Regulation compliant. Stramek also manufacture the following squaresection replacement gaskets to suit the body of the APV Puma pump; P.7 BODYSEAL P. BODYSEAL P.11 BODYSEAL Square section Nitrile gasket, with 7.0 I.D. Square section Nitrile gasket, with.0 I.D. Square section Nitrile gasket, with 11.0 I.D.

O.E.M. STK to Suit ZM Series Pumps series for A.P.V. pumps Stramek manufacture the STK to suit former Pasilac Rosista brand ZM series pumps. The STK design features the enhanced sealing benefits of a boot mounted seat, to the same dimensions as the O.E.M. metal to metal design. SHAFT SIZE SIZE CODE O.E.M. PUMP MODEL 0.00 000 0.00 0.0 0.00.80 ZMA, ZMB, ZMH1 &, ZMK1 &.00 00.00.0 1.00.80 ZMS, ZMS 0.00 000.00 7.00 0.00 1.00 ZMH, ZMK, ZMD STK to Suit A.P.V. Agitators Stramek manufacture our STK bearing set to suit former Osborne Craig brand agitators. STK features a ceramic selfaligning face set in a Carbon cup bearing. SHAFT SIZE SIZE CODE 1.1 08 7.00..0 STK to Suit A.P.V. Cleanline Pumps Stramek manufacture our STK face kits to suit APV Cleanline series pumps. The Stramek parts are designed to directly replace the wear parts of the O.E.M. seals, it is rarely necessary to replace the seal sleeve and housing as these are nonwearing parts. The kits are supplied with the wavespring as standard. If the size you require is not shown here, please contact us. SHAFT SIZE SIZE CODE O.E.M. PUMP MODEL 1.1 08.00.00 7.70 7.70 CL 0, CL 1 1.87 07.00.00.00 8.0 CL.1 0 7.00 7.00 1.0.0 CL STK to Suit ZM Series Pumps Stramek manufacture our STK O Ring mounted wavespring seal to suit former Pasilac Rosista brand ZM series pumps. D SHAFT SIZE SIZE CODE D O.E.M. PUMP MODEL 1.87 080.0.0.00 7.0 ZMS.1 00 7.00 7.00.0 7.0 ZMS Note: Due to the clearance between shaft and seal faces, Stramek s size code may not reflect the actual shaft sizes.

STK 7 to Suit A.P.V. DW Lobe Rotor Pumps series for A.P.V. pumps Stramek manufacture replacement seal face kits, complete with O Rings, to suit A.P.V. DW series lobe rotor pumps. Available with Silicon Carbide rotary face (short face) and Silicon Carbide stationary face (long face). For further sizes or for double seal arrangements, please contact us. O.E.M. NOMINAL SHAFT SIZE SIZE CODE D O.E.M. PUMP MODEL 8.00 080.00 0.00 8.0 1.0 DW 1 8.00 080 1.00 0.00 8.0 1.0 DW D 8.00 080 0.00.00.00 1.0 DW 8.00 080.00 8.00.00 1.0 DW Note: Due to the clearance between shaft and seal faces, Stramek s size code may not reflect the actual shaft sizes. STK 7 to Suit A.P.V. former D.D.M.M Pumps Stramek manufacture direct replacement seals for former D.D.M.M. Kolding or Pasilac centrifugal pumps, commonly utilised in dairies. SHAFT SIZE SIZE CODE 0.00 000 7.00 8.00 1.00.00 00 7.00 0.00 1.00 STK 1 to Suit Common Positive Displacement Pumps Stramek manufacture a 1.00 STK 1 rubberencased multispring seal, for use in positive displacement pumps, frequently found in food processing. SHAFT SIZE SIZE CODE 1.00 081 7.70.00. 1.00 Stramek STK to Suit Wild Indag Mixer Pumps Stramek manufacture direct replacement seals for Wild Indag inline mixer pumps, commonly utilised in dairy, especially yoghurt, production. The seal size code 070 has the stationary O Ring mounted into the housing with a push fit block stationary ring, the larger size seals have more conventional stationaries with a central O Ring groove. STK are supplied in FDA complaint materials as standard. SHAFT SIZE SIZE CODE 1.187 070 1.0.00.0 11.0 1.00 081.1.00.0 8.00 1.87 07 0.0 0.00 8.10 7.70

O.E.M. mechanical seals for FRISTAM pumps Fristam centrifugal and loberotor pumps are widely utilised in the dairy, beverage and pharmaceutical industries. Stramek offer a wide range of components and complete seal sets to directly replace the O.E.M. seal components, without any modification to the seal housings or the pump seal chamber. Stramek supply from stock individual seal components and complete seal sets, if you require anything not illustrated on the following pages, please contact us. Individual Stramek Rotary Components; Inboard Rotaries Stramek s Stock Code Where XX is stated in the code, apply, 0 or as appropriate to shaft size required. WXX08/1 Inboard rotary, with base, with inserted Carbon face. WXX08/1 WXX08/1.S.C. WXX08/1.T.C. Inboard rotary, with base, with inserted Silicon Carbide face. Inboard rotary, with base, with inserted Tungsten Carbide face. WXX0/1 YXX08/ Inboard rotary, with tappit base, with inserted Carbon. Y08/ Inboard rotary, with flat tappit base, with inserted Carbon. Y08/ Inboard rotary, with extended tappit base, with inserted carbon. YXX08/.R. Inboard rotary, with tappit base, with inserted SiCSiC. WXX0/ Inboard rotary, rubber encased, with base, with Carbon face. Outboard Rotaries WXX08/1B Stramek s Stock Code WXX0/ WXX08/1B Outboard rotary (no base), with inserted Carbon face. WXX08/1B.S.C. Outboard rotary (no base), with inserted Silicon Carbide face. WXX08/1B.T.C. Outboard rotary (no base), with inserted Tungsten Carbide face. WXX0/1 Outboard rotary, rubber encased, Carbon face. WXX0/ Outboard rotary, rubber encased, Carbon face, with garter spring. YXX08/ Individual Stramek Stationary Components; Inboard Stationaries Stramek s Stock Code Where XX is stated in the code, apply, 0 or as appropriate to shaft size required. WXX0/1 Inboard pinnedseat, Monolithic Stainless Steel WXX0/1.S.C. Inboard pinnedseat, inserted Silicon Carbide face WXX0/1.T.C. Inboard pinnedseat, inserted Tungsten Carbide face W00/8 Inboard bielastomer seat, Monolithic Stainless Steel W00/8.CER Inboard bielastomer seat, Monolithic Ceramic WXX0/ WXX0/1 Outbound Stationaries WXX0/8 Stramek s Stock Code WXX0/ WXX0/ Outboard seat, Monolithic Stainless Steel WXX0/.S.C. Outboard seat, inserted Silicon Carbide face WXX0/.T.C. Outboard seat, inserted Tungsten Carbide face WXX0/.S.C.MON Outboard seat, Monolithic Silicon Carbide W07/1 Outboard seat, Monolithic Ceramic Flush Stationaries W00/ Stramek s Stock Code W0/1 W0/ W00/ W0/ mm Flush Seat, 0mm O.D. x.mm Thick, Monolithic Stainless Steel mm Flush Seat, mm O.D. x 1.0mm Thick, Monolithic Stainless Steel 0mm Flush Seat, 0mm O.D. x 8.0mm Thick, Monolithic Stainless Steel mm Flush Seat, mm O.D. x 0.0mm Thick, Monolithic Stainless Steel WXX07/1 WXX0/

mechanical seals for FRISTAM pumps O.E.M. Individual Stramek Collet and Housing Components; Stramek s Stock Code W01/1 W001/1 W01/1 Flush collet for double seal, without bush Flush collet for single or double seal Flush collet for single or double seal W01/1 W01/ W001/ W001/.CER W01/ W01/.CER Flush collet for double seal, with bush Flush housing with integral seal faces, Stainless Steel Flush housing with integral seal faces, Ceramic Flush housing with integral seal faces, Stainless Steel Flush housing with integral seal faces, Ceramic W001/1 W01/ and / W01/ W01/ W001/ W01/ W01/1 W01/ Y01/ Y001/ W01/7 W01/8 Y01/1 Y01/ Flush collet for double seal, with bush and internal retaining lip for the Carbon bush Single seal stationary housing, without flush Single seal stationary housing, without flush Flush collet for double seal, with extended bushing Flush collet for double seal, standard bush Flush collet for single seal, with extended bushing Flush collet for double seals, without bush Flush collet for double seals, without bush Flush collet for double seal, with gland plate Flush collet for single seal, with extended bushing Flush collet for double seal, without bush Flush collet for double seal, without bush, without internal groove W01/ W01/ Individual Stramek Additional Components; Stramek s Stock Code W0/1 Spacer ring for single seals without flush W0/ Extended Carbon bush for W01/8 Collet W0/ Extended Carbon bush for W01/ Collet W0/ Carbon bush for W01/, / and /1 Collets W01/1 Stramek Repair Sets (Without Collet or Housing Components); W01/8 STK V000 Stramek s Stock Code STK V000 STK V000A STK V001 STK V00 STK V00 STK V00 STK V007 STK V008 STK V010 STK V011 STK V01 STK V01 STK V017 STK V00 STK V01 STK V0 STK V00 STK V00 Internal and external openspring seals As above, plus W0/ Carbon bush Internal open spring seal, rubber encased external seal Internal and external rubber encased seals Internal and external openspring seals, both with short external type seat Internal openspring seal, external rubber encased seal, both with short external type seat Internal tappitbase seal, with external open spring seal Internal tappitbase seal, with external rubberencased seal Internal openspring seal only Internal rubberencased seal only Internal openspring seal only, with short external seat. W00/1 rubber encased rotary with bielastomer seat. W00/ rubber encased rotary with bielastomer seat. External openspring seal only External rubberencased seal only 0mm Internal openspring rotary with bielastomer seat Internal tappitbase seal only Internal tappitbase rotary, with short external seat. Y01/1 and STK V017 STK V00 All the above repair seal sets are supplied with appropriate O Rings and locating pins for the collet flush housing. For other repair set combinations, please refer to the O.E.M. database and /or our O.E.M. Price List or contact us with your requirements. STK V00 7

O.E.M. complete collet seal sets for FRISTAM pumps Stramek supply from stock complete seal units for Fristam pumps, based on the extensive range of Stramek components. These complete seal units directly replace the Fristam O.E.M. assembly, while offering the benefits of Stramek quality and reliability. The following illustrations only show the most common arrangements for each flush collet or housing STK, please ask for alternatives, we have a huge range of variations available to suit your requirements. W01/1 Collet Arrangement 0.0 7. 7. 0.0 fda W01/ Collet Arrangement 0.0 7. 7. 0.0 W08/1 W0/1 W0/ W08/1B INBOARD ROTARY INBOARD SEAT OUTBOARD SEAT OUTBOARD ROTARY W08/1 W0/1 W0/ W0/ W08/1B INBOARD ROTARY INBOARD SEAT CARBON BUSH OUTBOARD SEAT OUTBOARD ROTARY W01/ Collet Arrangement W01/ Collet Arrangement 0.0 7. 7. 0.0 W00.V1.E.WF. 1..0.0.0 7..7.0 W08/1 W0/1 W0/ W0/ W08/1B INBOARD ROTARY INBOARD SEAT CARBON BUSH OUTBOARD SEAT OUTBOARD ROTARY W08/1 W0/1 W01/ INBOARD ROTARY INBOARD SEAT SEAT HOUSING WX01/1 Arrangement WX01/ Arrangement W000.V701C.E.WF. W000.V701F.E.WF. W00.V70.E.WF. W00.V11B.E.WF. 1..0.0 W00.V1C.E.WF. 1..0.0.00.7 No step on I.D. at Internal flush port fda W00.V11.E.Q. Step on I.D. at Internal flush port fda WXX08/1 WXX0/1 WXX0/ INBOARD ROTARY INBOARD SEAT OUTBOARD SEAT WXX 08/1B OUTBOARD ROTARY WXX08/1 INBOARD ROTARY WXX08/1B OUTBOARD ROTARY SHAFT SIZE SIZE CODE 0.00 000 8.00.80.00 7.0.00 00.0 8.0.00 8.0 8

complete collet seal sets for FRISTAM pumps To aid the identification of the correct seal unit, the Stramek code is derived from the original O.E.M. seal set code, with both a W for 1 Stainless Steel (or Y for F.D.A. ) and a shaft size prefix, and a standard format Stramek material code suffix. For example, a 1 Stainless Steel Stramek seal set to replace O.E.M. code.11b would be W00.V11B.E.WF., where the 00 denotes mm shaft size, E denotes EP O rings, and WF denotes Carbon vs Stainless Steel in a double seal arrangement. The following illustrations only show the most common arrangements for each collet style. We have a huge range of variations available to suit your requirements. Please refer our O.E.M. Price List or Web Portal O.E.M. DataBase, or enquire. O.E.M. W01/ Collet Arrangement W01/1 Collet Arrangement 0.0 7. 0.0 7. 7. 0.0 W00.V0A.E.WG. W08/1 W0/1 W0/ W0/ INBOARD ROTARY INBOARD SEAT Y01/ Collet Arrangement Y00.VC.E.WF. CARBON BUSH W01/8 Collet Arrangement W00.V171.E.Q. 1. OUTBOARD ROTARY Y08/ W0/1 W0/ W08/1 INBOARD ROTARY 1. 1..0.0.0 INBOARD SEAT 0.0 7..00 7. 7. 0.0.00.0 OUTBOARD SEAT 8.00.0 OUTBOARD ROTARY fda W00.V.E.WF. W00.V1.E.WG. W00.V0D.E.WF. 1. W08/1 W0/1 W0/ W0/ W08/1B INBOARD ROTARY INBOARD SEAT CARBON BUSH W01/7 Collet Arrangement. W01/1 Collet Arrangement OUTBOARD SEAT OUTBOARD ROTARY W08/1 W0/1 W00/7 W00/ INBOARD ROTARY 1..0 INBOARD SEAT.0.00 7..0 7. 71.00 0.00 CARBON BUSH.0 7. 0.0 0.0 OUTBOARD ROTARY.0.0.0 fda W08/1 W0/ W0/ INBOARD ROTARY INBOARD SEAT CARBON BUSH Y08/ W0/1 W0/ W08/1 INBOARD ROTARY INBOARD SEAT OUTBOARD SEAT OUTBOARD ROTARY

O.E.M. FRISTAM pump seal sets Stramek seals to suit nonflush FRISTAM FPX pumps NONFLUSH SINGLE SEALS, with Silicon Carbide rotary, Monolithic Carbon stationary, and E.P. elastomers, F.D.A. Compliant. Stramek s Stock Code Y00.V018.E.RD. Y000.V018.E.RD. SHAFT SIZE SIZE CODE.00 00.00.00 0.00 0.00 000 0.00.00 7.00 Stramek seals to suit flushed FRISTAM FPX pumps L FLUSH SINGLE SEALS, with Carbon rotary, Monolithic Silicon Carbide stationary, and E.P. Elastomers, F.D.A. Compliant. Dimension L does not apply. Stramek s Stock Code Y00.V01.E.DR. Y000.V01.E.DR. Y00.V01.E.DR. FLUSH DOUBLE SEALS, with Carbon rotaries, Monolithic Silicon Carbide stationary, and E.P. elastomers, F.D.A. Compliant. L Applies. SHAFT SIZE SIZE CODE L.00 00.00.00.00 0.00 0.00 000 0.00.00 8.00.00.00 00.00.00 0.00.00 Stramek s Stock Code Y00.V0.E.YR. Y000.V07.E.YR. Y00.V07.E.YR. STK V00 to Suit Fristam FT Series Pumps Stramek manufacture and stock 0mm single seals to suit Fristam FT00 and FT00 series centrifugal pumps. F.D.A. Compliant. Stramek Stock Code = Y000.V00.E.R. SHAFT SIZE SIZE CODE 0.00 000.0.00.00 1.00 STK 17 and 1 to Suit Fristam Multistage Pumps Stramek make multispring hydraulically balanced highperformance STK 17 seals to suit Fristam FM, FPE, FPH and FPHP series multistage centrifugal pumps. Stramek Stock Code = WXXXX.17.V.R. SHAFT SIZE SIZE CODE D 18.00 00 7.00.00.00.0.00 D.00 00 1.00.00.00 0.00 1.00.00 00 1.00.00.00 0.00 1.00 To complement the STK 17, Stramek also supplies the 8mm sleeve and lip seal to seal the flush fluid. For highperformance, we also offer the 8mm STK 1 external seal, in Carbon vs Ceramic with E.P., as a mechanical seal for the flush position. Stramek Stock Codes; WXXXX.17.V.X.SLEE and WXXXX.1.E.C. SHAFT SIZE SIZE CODE.00 00.00.0 8.10 8.00 080.00.80 8.10 100

seals for FRISTAM lobe rotor pumps Stramek seals to suit FRISTAM FLII Series lobe rotor pumps Stramek manufacture and stock seal sets to directly replace the single and double arrangements in Fristam FLII Series lobe rotor pumps. Available with Monolithic Silicon Carbide central rotary face and inboard stationary, with Carbon outboard stationary for double seal arrangements. Stramek s Stock Code WXX0/1 Single seal in SSiC vs SSiC WXX0/1.CAR Single seal in SSiC vs Carbon WXX0/ Double seal in SSiC vs SSiC vs Carbon O.E.M. D SLEEVE O.D. D SIZE CODE O.E.M. PUMP MODEL 8.00 000 FLII 8.00 000 FLII 7 0.00 000 FLII 100.00 00 FLII 10 Stramek seals to suit Fristam FL, FLF and FLFN series lobe rotor pumps Stramek manufacture and stock complete seals to directly replace the O.E.M. seals in Fristam FL, FLF and FLFN series lobe rotor pumps. Available with Tungsten Carbide vs. Tungsten Carbide seal faces as standard, to improve seal life in the poor lubrication conditions common in the applications these pumps are utilised for. Stramek s Stock Code WXX10/1 Single seal in Tungsten Carbide Vs Tungsten Carbide with EP O Rings. SHAFT SIZE SIZE CODE O.E.M. PUMP MODEL 0.00 000 FL, FLF 1.00 000 FL7, FLF7 8.00 080 F00, FLF100 Stramek seals to suit Fristam FK and FL series seals Stramek also supply repair sets for the Fristam FK and FL series seals. These kits will suit either Stramek or original O.E.M. seals, and contain rotary face, stationary face, lip seals, and necessary O rings. The kits contain parts to repair two seals, so only one repair kit is required for each pump repair. Stramek s Stock Code WXX11/ Repair set in T.C. Vs T.C. with EP O Rings WXX11/ Repair set in Carbon vs Stainless Steel with EP O Rings. Faded parts not included WXX11/.VIT Repair set in Carbon vs Stainless Steel with Viton O Rings. SHAFT SIZE SIZE CODE O.E.M. PUMP MODEL 0.00 000 FL, FLF 1.00 000 FL7, FLF7 8.00 080 F00, FLF100.00 000 F0, FLF10 Stramek seals to suit Fristam FKL0 lobe rotor pumps Stramek manufacture complete single and double seals for the common FKL0 lobe rotor pump. The Stramek design incorporates an inserted Silicon Carbide rotary, removing the O.E.M. chrome oxide rotary and providing a cleaner solution for food process. For further FKL series seals, please contact us. Stramek s Stock Code W80/1 Single seal in SSiC vs SSiC with Viton O Rings W80/ Double with SSiC vs SSiC vs Carbon, Viton O Rings. SHAFT SIZE SIZE CODE O.E.M. PUMP MODEL 8.00 080 FKL0, FZX 100, FZX 10, FZX 00, FZX 0 101

O.E.M. Conical Spring Seal Types seals for GRUNDFOS HILGE pumps Stramek manufacture and stock a wide range of conical spring seals to suit several Grundfos Hilge centrifugal pump ranges, such as Hygia, Maxana and Sipla. To aid identification of these very similar looking seals, please use the table below as your guide, showing the installed dimensions with the Stramek STK code and the O.E.M. STK code. SHAFT SIZE SIZE CODE Stramek STK CODE O.E.M. SEAL CODE 1.00 010 0.0 1.00.00 8.00 1 0011 O 1.00 010 0.0 1.00.00 8.00 1S 0011 O 1.00 010.00 1.00 0.00.0 8BU 001 O.00 00 7.00.00 7.0 10.00 1 K F 8.00 080.0 0.00.00.00 1 0018 O 8.00 080.0 0.00.00.00 1H 0018 A 8.00 080.0 0.00.00.00 1S 0018 O 8.00 080.00 0.00.0 11.00 8B 008 O 0.00 000.00.00.0 10.00 1 K0 F 0.00 000.00.00.0 10.00 1L K0 G 0.00 000.00.00 0.00 10.00 17 N0 8.00 080 0.0.00.00 11.0 1 0018 O 8.00 080.00.00 1.00 11.0 8B 008 O 0.00 000 8.00.00.00 1.00 1 K0 F 0.00 000 8.00.00.00 1.00 1L K0 G 0.00 000 70.00.00 8.00 1.00 1 K0 F 0.00 000 70.00.00 8.00 1.00 1L K0 G 0.00* 000 70.00.00.00 1.00 8BU 180 O If the final digit of the O.E.M. seal code is then the replacement seal requires an anticlockwise rotation coil. Please replace the R character in the Stramek code with L for anticlockwise coil. If the O.E.M. code you require is not listed, check the two seal Types following or please contact us with your requirements. STK 18 Stramek manufacture and stock our STK 18 conical spring seals with bielastomeric seats, for pumps with flushed seal chambers. The STK 18 is frequently installed in tandem with the STK 1 seals listed above, on Grundfos, Hilge centrifugal pumps. SHAFT SIZE SIZE CODE O.E.M. SEAL CODE 1.00 010.0 1.00 0.00 10.80 0B1 B 8.00 080 7.0 0.00.0 11.0 0B8 B 8.00 080.0.00.0 11.0 0B8 B 10

Hygienic 1/1 Seal Types seals for GRUNDFOS HILGE and INOXPA Stramek manufacture and stock multispring seals to replace the original O.E.M. wavespring seals, utilised for hygienic applications in Grundfos Hilge centrifugal pumps. O.E.M. L D The common centrifugal series includes; Hygiana, Euro Hygia, Maxana, Dura, Sipla, Contra and Durietta. However, the seal codes are universal and you may identify your seal from the codes below. Conversion to the direct replacement Stramek balanced multiplespring design avoids the potential for premature single wavespring failure. SHAFT SIZE SIZE CODE D L Stramek STK CODE O.E.M. SEAL CODE 1.00 010 0.0 1.00.0.00 8.00.00 1 0011 O1 8.00 080.0.00.00.00.00.00 1 0018 O1 8.00 080.0.00.00.00.00.00 1L 0018 A1 8.00 080 8.00.00.00.0 10.0 0.0 1 BS8 O1 8.00 080 8.00.00.00 8.00 10.0.00 1A BS8 O1 8.00* 080 0.0.00.80.00 11.0.00 1 0018 O1 8.00 080 7.10.00.80.00 10.0 0.0 1 BS8 O1 Stramek seals to suit INOXPA pumps STK 0 Seals to suit Prolac Series pumps Stramek manufacture and stock STK 0 stationary multispring seals, to suit Inoxpa Prolac S series pumps, with single or tandem seal arrangements. With stationary seals like the STK 0, the coils are on the stationary and the rotary is a counterring. Pumps with flushed seal chambers use tandem seals, with the Stramek STK 0 in the impeller position, and a standard Stramek STK 188 in the outer flush water position. Dimensions for the STK 188 can be found in the WaveSpring Seals section. SHAFT SIZE SIZE CODE 0. 018.0.00 10.0 1.000 0.0.00 10.00 1.00 081 7.00 1.00 1.0 STK 18 Seals to suit inoxpa SLR Series Lobe Rotor pumps Stramek manufacture and stock STK 18 wavespring O Ring mounted seals with bielastomeric seats, to suit Inoxpa SLR series loberotor pumps. As with the majority of lobe rotor designs, two seals are required for each pump. SHAFT SIZE SIZE CODE 8.00 080.00.00 1.10 1.00.00 00.00.0 1.10 1.00 0.00 000 70.00.0.00 1.00.00 00 0.00 8.0.80 1.00 10

O.E.M. seals for JOHNSON pumps Stramek manufacture and stock a wide range of standard range seals that are utilised in S.P.X. Johnson equipment, such as our STK RDS, STK EBG1 and STK WS7M seal ranges. Stramek also make and stock several special design / dimension seals, the most common of which are detailed below. STK 10 Face Sets to suit OL Series Lobe Rotor pumps Stramek manufacture and stock replacement seal face sets, complete with wavesprings and the necessary O Rings, in shaft sizes, 0 and mm. D For 7mm and all double seal versions, to suit pumps with flushed chambers, please contact us. SHAFT SIZE SIZE CODE D O.E.M. PUMP MODEL.00 00 8.00 7.0 11.00 1.00 OL 1 0.00 000 8.00.00 1.0 1.0 OL.00 00 71.00.00 11.0 17.0 OL STK 188Y Seals to suit IC and PD Series Lobe Rotor pumps Stramek manufacture and stock our STK 188Y O Ring mounted wavespring seals, with the very distinctive seat outer profile. 0mm size stationary has a single semicircular antirotation slot, other sizes have three flat antirotation slots. SHAFT SIZE SIZE CODE Stramek also offer our STK 18Y in 0mm and mm sizes, featuring a standard STK 18 rotary with the 188Y stationary, which maybe the prefered option for these shaft sizes. O.E.M. PUMP MODEL 0.00 000 0.00 1.00 1.10.0 IC 10, PD 10.00 00.0.0 1.10.0 IC 0, PD 0 0.00 000.00 1.0 1.10 10.0 IC 0, PD 0 70.00* 0700 8.00 88.0.80 1.10 IC 0, PD 0 80.00* 0800.00 101.00.80 1.0 IC 0, PD 0 STK 188Z Seals to suit TL Series Lobe Rotor Pumps Stramek manufacture and stock our STK 188Z O Ring mounted wavespring seals with bielastomeric stationaries, to suit Top Lobe series loberotor pumps. SHAFT SIZE SIZE CODE please note; Stramek offer other specific design seals to suit S.P.X. Johnson pumps, such as our STK 1 to suit Top Wing and our STK 18 to suit SQ series pumps. Please contact us with your requirements and for stock availability on these. O.E.M. PUMP MODEL 0.00 000 8.00 1.00 1.10 10.0 TL 1.00 00.00.0 1.10 1.00 TL 0.00 000 7.00 1.0 1.10 1.00 TL 10

seals for G.E.A. TUCHENHAGEN pumps STK Stationary Seals to suit ag, zg, ar and zr series pumps Stramek manufacture and stock a range of singlespring stationary seals, with Silicon Carbide faced counterring rotaries, and inserted Carbon sprungstationaries to replace the chromeoxide coated rotaries of the O.E.M. seals. SHAFT SIZE SIZE CODE 1.00 010 0.00 7.00.00 0180 0.00 11.00.00 010 0.00 11.00.00 080 0.00 11.00 O.E.M. STK B Stationary Seals to suit VP series pumps Stramek manufacture and stock a range of singlespring stationary seals, with Stainless Steel counterring rotaries with outer turningvane, and inserted Carbon sprungstationaries. SHAFT SIZE SIZE CODE 18.00 010 0.00 10.00.00 000.00 11.00 0.00 00.00 11.00 STK 11 Hygienic Seals to suit Variflow KN Pumps L D Stramek manufacture and stock two sizes of hydraulically balanced, multispring hygienic seals to suit Variflow KNseries pumps, directly replacing the original design. Please contact us if you require the 0mm size or double seals for pumps with flushed seal chambers. SHAFT SIZE SIZE CODE D L O.E.M. STK CODE 0.00 000.00 1.0.0.0 7.00.00 KN 1.00 00 0.00 8.00.0 0.0 7.00.00 KN STK 11 Hygienic Seals to suit Variflow TP Pumps Stramek manufacture and stock two sizes of hydraulically balanced, multispring hygienic seals to suit Variflow TPseries pumps. The rotary head locates directly onto a specific area of the shaft, removing the need for an inner barrel. The rotary also has a distinctive very low seal face protrusion profile. SHAFT SIZE SIZE CODE O.E.M. PUMP MODEL 0.00 00 0.00.00.0 7.00 TP10, TP1, TP0, TP0.00 000.00.00.0 7.00 TP1, TP, TP0, TP80 10

Cartridge and Engineered Seals

Standard Cartridge CMS CMSANSI ANSI l1 l l l 1 1 1 1 Item 1 8 10 d1 h d 7 Seal face 1 11 Item 10 Snap ring,, 7 ORing 11 Cover Spring 1 Assembly fixture Seat Shaft sleeve 8 Drive collar Set screw (remove after installation) 1 Screw 1 Gasket 1 Screw plug 1 Lip seal (QN), throttle ring (TN) 108 Single seal Available for standard and big bore (CMSASPN) seal chambers Balanced Cartridge Independent of direction of rotation Single seals with flush (ASPN, ABPN) and with quench combined with lip seal ( ASQN, ABQN) or throttle ring (STN, ABTN) Technical Features Ideal for use in ANSI process pumps No damage of the shaft by dynamically loaded ORing No dimensional modification of the seal chamber necessary, small radial installation height Universal applicable for packings conversions, retrofits or original equipment Typical Industrial Applications ANSI process pumps Chemical industry Food and beverage industry Petrochemical industry Pharmaceutical industry Universally applicable Water and waste water technology Standards ANSI Materials Seal face: Silicon carbide (Q1), Carbon graphite resin impregnated (B), Tungsten carbide (U) Seat: Silicon carbide (Q1) Secondary seals: FKM (V), EPDM (E), FFKM (K), Perflourocarbon rubber/ PTFE (U1) Springs: Hastelloy C (M) Metal parts: CrNiMo steel (G), CrNiMo cast steel (G) Performance Capabilities CMSSN, SNO, QN, TN Sizes: Upto 100 mm (Upto.000") Other sizes on request Temperature: t= 0 C... 0 C (0 F... 8 F) (Check ORing resistance) Sliding face material combination BQ1 Pressure: p1 = bar ( PSI) Speed = 1 m/s ( ft/s) Sliding face material combination Q1Q1 or UQ1 Pressure: p1 = 1 bar (17 PSI) Speed = 10 m/s ( ft/s) Permissible axial movement: ± 1.0 mm, d1 7 mm ± 1. mm

Installation, Details, Options º A º l17 l1 l1 1 Design Variations l17 l1 l1 1 Standard Cartridge d max d min 1 d max d min 1 da S a1 CMSASTN and ABTN Single seal for operation with unpressurized quench for standard (S) and big bore (B) seal chambers. Same as CMSASPN and ABPN but with throttle ring (item 1). The cover has auxiliary connections for flushing and quench. Throttle ring: PTFE carbon graphite reinforced (T1). CMSASQN and ABQN S i n g l e s e a l f o r o p e r a t i o n w i t h unpressurized quench for standard (S) and big bore (B) seal chambers. Same as CMSASPN and ABPN version but with lip seal (item 1) at the atmospheric side. The cover has auxiliary connections for flushing and quench. Lip seal: NBR (P), PTFE carbon reinforced (T) Dimensional Data BIG BORE : Dimensions in inch d 1 d d min d max l 1 l l l l 1 l 1 l 17 a 1 d a s Connection 1.000 1.1 1.0 1.7 1.00 1. 1.70 1.87.000.1.0.00..70.000.0 1.71 1.0.1.8.77.8.0.1.8.0.7 1.7.000.00.1.7.1.0..170.70.01.7.18.0.7.7.8.0.7.118..1.8.8.8.8.8.8.8.8.8.8.07 1. 1. 1. 1. 1. 1. 1. 1.1 1.1 1..7 STANDARD BORE : Dimensions in inch 0. 0. 0. 0. 0.70 0. 0. 0.71 0.71 0. 1.01 1.000 1.000 1.000 1.000 1.0 1.000 1.7 1.0 1.0 1.7 1.7.7.7.01.071.10.01.10.10.10.10.88 1.0 1.1 1.8.0.10 1.8.10.10.10.10.1 Note: Additional technical & dimensional information will be provided on request. 1.08 1.08 1.08 1.01 1.08 1.08 1.08 1.08 1.08 1.08 1..11..7.0.88.7.8.1..1.0.00.118..8.0.80.17 7.7.80 7.80 8.8 0.7 0.7 0. 0.1 0.1 0.70 0.70 0.70 0.70 0.0 0.0 1/ NPT 1/NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT d 1 d d min d max l 1 l l l l 1 l 1 l 17 a 1 d a s Connection 1.000 1. 1.7.0.8 1. 0. 1.000.7 1.0 1.08.7.7 0. 1/ NPT 1.1 1.71 1.7.0.8 1. 0. 1.000.7 1.0 1.08.0.1 0.7 1/ NPT 1.0 1..008.0.8 1. 0. 1.000.10.10 1.08.8. 0. 1/ NPT 1.7 1.1.000.0.8 1. 0. 1.000.7 1.1 1.08.70.1 0.7 1/ NPT 1.00.00..717.8 1. 0. 1.000.10.10 1.08.0.88 0.1 /8 NPT 1..0.1.7.8 1. 0. 1.000.10.10 1.08.00.1 0.1 /8 NPT 1.70.1.00..8 1. 0. 1.000.01 1.8 1.08.8.118 0. /8 NPT 1.87.8.1.070.8 1. 0. 1.000.071.0 1.08.10.118 0.1 /8 NPT.000.77.7.18.8 1. 0. 1.000.10.10 1.08.0.7 0.0 /8 NPT.1.8.1.8.8 1. 0. 1.000.01 1.8 1.08.80.1 0.0 /8 NPT.0.0.0.8.8 1. 0. 1.000.10.10 1.08.88.8 0.0 /8 NPT.7.070.1.0.8 1. 0. 1.000.00.181 0.70 /8 NPT.00.1.1.7.8 1. 0. 1.1.10.10 1.08.8. 0.70 /8 NPT..8.17.01.8 1. 0. 1.0.10.10 1.08.8.78 0.0 /8 NPT.70.0.70.70.8 1. 0.70 1.0.10.10 1.08. 7.1 0.70 /8 NPT.000.7.01.7.07.0 1.07 1.0.88.1 1..000 7.8 0.70 /8 NPT.0.18.8.1.07.0 1.07 1.0.88.1 1..1 7.80 0.70 /8 NPT.70.8.70..07.0 1.07 1.000.87 8.18 0.8 /8 NPT 10

Standard Cartridge CMS CMS ANSI Additional variants available for ANSI pumps Balanced Cartridge Independent of direction of rotation Single seal Technical Features Costeffective Easy installation due to preassembled unit (reduced downtimes) Ideal seal for standardizations No damage caused by dirt entered during assembly No damage of the shaft by dynamically loaded ORing Universal applicable for packings conversions, retrofits or original equipment l1 l l l 1 1 1 Typical Industrial Applications Chemical industry Food and beverage industry Petrochemical industry Pharmaceutical industry Universally applicable Water and waste water technology Centrifugal pumps Eccentric screw pumps Process pumps d Standards h 7 1 8 10 d1 d ANSI Item 1 1 11 Item Seal face 10 Snap ring,, 7 ORing 11 Cover Spring 1 Assembly fixture Seat 1 Screw Shaft sleeve 1 Gasket 8 Drive collar 1 Screw plug Set screw 1 Lip seal (QN), throttle ring (TN) 110 Materials Seal face: Silicon carbide (Q1), Carbon graphite resin impregnated (B), Tungsten carbide (U) Seat: Silicon carbide (Q1) Secondary seals: FKM (V), EPDM (E), FFKM (K), Perflourocarbon rubber/ptfe (U1) Springs: Hastelloy C (M) Metal parts: CrNiMo steel (G), CrNiMo cast steel (G) Performance Capabilities CMSSN, SNO, QN, TN Sizes: Upto 100 mm (Upto.000") Other sizes on request Temperature: t= 0 C... 0 C (0 F... 8 F) (Check ORing resistance) Sliding face material combination BQ1 Pressure: p1 = bar ( PSI) Speed = 1 m/s ( ft/s) Sliding face material combination Q1Q1 or UQ1 Pressure: p1 = 1 bar (17 PSI) Speed = 10 m/s ( ft/s) Permissible axial movement: ± 1.0 mm, d1 7 mm ± 1. mm

Installation, Details, Options º A º l1 l1 l1 Design Variations l1 l17 l1 1 1 l17 l1 l1 1 1 Standard Cartridge da a1 S CMSSNO Single seal without connections, for deadend operation. CMSTN Single seal for operation with unpressurized quench. Same as CMSSN but with throttle ring (item 1). The c o v e r h a s a u x i l i a r y connections for flushing and quench. Throttle ring: PTFE carbongraphite reinforced (T1). CMSQN Single seal for operation with unpressurized quench. Same as "SN' version but with outboard lip seal (item 1). The cover has auxiliary connections for flushing and quench. Lip seal: NBR (P), PTFE carbon reinforced (T). Dimensions in inch d 1 d d min. d max. l 1 l l l l 1 l 1 l 1 l 1 l 17 a 1 d a s 1.000 1.1 1.0 1.7 1.00 1. 1.70 1.87.000.1.0.7.00..70.87.000.1.0.7.00..70.000 1. 1.811 1.0.08.00.0.0.8.77.8.0.070.1.8.0.7.7.10.18.11.7..8.7 1.70 1.87.000.1.0.7.00..70.87.000.1.0.7.70.000.000.1.0.7.00..70.000.000.00.0.0..700.81.0.10.7.0.0.800.7.0...7.88.0.17.1...0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.07.07.07.07.07.07.07.07.07 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1..0.0.0.0.0.0.0.0.0 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.07 Dimensional Data 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10 l 1 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.78 1.81 1.81 1.81 1.81 1.81 1.81 1.81 1.81 1.81 Dimensions in millimeter d 1 d d min. d max. l 1 l l l l 1 l 1 l 1 l 1 l 1 l 17 a 1 d a s 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1. 1. 1. 1. 1. 1. 1. 1. 1. 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8.10.10.10.10.10.10.10.10.10.10.10.10.10.10.10.88.88.88 8 0 8 0 8 0 0 70 7 80 8 0 100.0.0 8.0.8.8.0.0 8.0 0. 0... 8.0 7.0 7.0 78.0 8.8.0 100.0 10. 10. 11. 11.1 1..0 7.0.0 1.0 1.0.0 7.0.0 1. 1..0 7.0.0 7.0 7.0 7.0 8.7.0 101. 108.0 111.1 117. 10.7 17.0 1..0.0 7.0 7.0 1..0 8.0. 70. 7.0 7.0 78.0 87.0 8.0 1.0 8. 108.0 118.0 1.0 18.0 1.0 18.0 1.0 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8.................. 7. 7. 7. 7. 7. 7........................................... 8.0 8.0 8.0 8.0 8.0 8.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.1.1.1.1.1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 7. 7. 7. 7. 7. 7. 17. 17. 17. 17. 17. 17. 17. 17. 17. 17. 17. 17. 17. 17. 17. 17. 17. 17..0.0.0.0.0.0 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 8.0 8.0 8.0 8.0 8.0 8.0 Note: Additional technical & dimensional information will be provided on request..10.10.10.10.10.10.10.10.10.10.10.10.10.10.10.1.1.1........................ 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1. 1. 1..1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.0.0.0.70.0.00.10.10.0.80.0.00.170.0.0.07.07.1.1.7.1.70.87.0 7 7 70 7 7 80 80 81 8 87 7 0 10 10 118 1 1 1 1 18 1.1.1.0..8.8...87.87.181.181.17.17 7.008 7.80 7.80 7.77 7.77 7.7 7.7 8.071 8.18 8.8 10 10 110 110 11 1 1 1 1 18 18 18 18 18 18 17 1 178 10 1 18 0 08 18 0.0 0.0 0.0 0.0 0.0 0. 0. 0. 0. 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.8 0.8 0.8 0.8 0.8 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0.0.0.0.0 111

Standard Cartridge CMS CMSANSI Dual l l7 (l) l 1 8 0 10 1 1 17 h 1 d1 min d 7 d max d 1 18 Dual seal Available for standard (CMSASDN) and big bore (CMSABDN) seal chambers Balanced Cartridge Double pressure balanced Independent of direction of rotation Integrated pumping device Technical Features Ideal for use in ANSI process pumps No damage of the shaft by dynamically loaded ORing No dimensional modification of the seal chamber necessary, small radial installation height Universal applicable for packings conversions, retrofits or OEM Typical Industrial Applications ANSI process pumps Chemical industry Food and beverage industry Petrochemical industry Pharmaceutical industry Universally applicable Water and waste water technology Standards ANSI Materials Seal face: Silicon carbide (Q1), Carbon graphite resin impregnated (B), Tungsten carbide (U) Seat: Silicon carbide (Q1) Secondary seals: FKM (V), EPDM (E), FFKM (K), Perfluorocarbon rubber/ptfe (U1) Springs: Hastelloy C (M) Metal parts: CrNiMo steel (G), CrNiMo cast steel (G) 11 1 1 1 Item 1,, 7, Seal face ORing 10, 1, 1 11 Spring Seat Shaft sleeve 8 Cover Seal face 11 Spring 1 Seat 1 Drive collar 1 Set screw 17 Snap ring 18 Assembly fixture 1 Hex socket head screw 0 Gasket 1 Screw plug

Performance Capabilities Sizes: d1 = Upto 100 mm (Upto.000 ) Other sizes on request Temperature: t= 0 C... 0 C (0 F... 8 F) (Check ORing resistance) Sliding face material combination BQ1 Pressure: p1 = bar ( PSI) Speed = 1 m/s ( ft/s) Sliding face material combination Q1Q1 or UQ1 Pressure: p1 = 0 bar (0 PSI) Speed = 10 m/s ( ft/s) Barrier fluid circulation system: pmax = bar ( PSI) Δp (p p1) ideal =... bar (... PSI), 7 bar (10 PSI) for barrier media with poor lubricating properties) Pump startup: Δp (p p1)max = bar ( PSI) allowed Recommended supply medium: max. ISO VG Permissible axial movement: ± 1.0 mm, d1 >= 7 mm ± 1. mm a Installation, Details, Options da º OUT IN IN OUT º S Standard Cartridge BIG BORE Dimensions in inch d 1 d d min. d max. l l l l 7 a d a s Connection 1.000 1.1 1.71 1.7.7 1.000.8 1.88 1..11.00 0.7 1/ NPT 1.0 1.7 1.0.000.18 1.000.0.08 1...118 0.7 1/ NPT 1.00 1. 1.70.1.00.0 1.000.0.08 1..7. 0. /8 NPT 1.87.8.1.7 1.000.0.08 1..0.8 0.1 /8 NPT.000.77.7.7 1.0.0.10 1.0.88.0 0.1 /8 NPT.1.8.1.8 1.000.0.10 1.0.7.80 0.70 /8 NPT.0.0.0.0 1.7.0.10 1.0.8.17 0.70 /8 NPT.00.1..7 1.0.0.10 1.0.1 7.7 0.70 /8 NPT..8.170.118 1.0.0.10 1.0..80 0.70 /8 NPT.70.0.70. 1.7.0.10 1.0.1 7.80 0.0 /8 NPT.000.7.01.1 1.7.0.1 1.0.0 8.8 0.0 /8 NPT.0 STANDARD BORE Dimensions in inch Dimensional Data d 1 d d min. d max. l l l l 7 a d a s 1.000 1.1 1.0 1.7 1.00 1. 1.70 1.87.000.1.0.7.00..70.000.0.70 1. 1.71 1. 1.1.00.0.1.8.77.8.0.070.1.8.0.7.18.8 1.7 1.7.008.000..1.00.1.7.1.0.1.1.17.70.01.8.70.0.0.0.0.717.7..070.18.8.8.0.7.01.70.7.1. 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.1 1.0 1.0 1.0 1.0 1.000.0.8.0.0.0.0.0.0.0.0.0.0.0.0...10.8.10.08.10.10.10.10.10.10.10.10.10.10.1.1 1.0 1. 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.7 1.7 Note: Additional technical & dimensional information will be provided on request..1.1.7.7..01.8.07..81.88.8.8..000.1.7.1..1.88.1.118.118.7.1.8.181..78 7.1 7.8 7.80 8.18 0. 0.7 0. 0.7 0.1 0.1 0. 0.1 0.0 0.0 0.0 0.70 0.70 0.0 0.70 0.70 0.70 0.8 Connection 1/ NPT 1/ NPT 1/ NPT 1/ NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT /8 NPT 11

Standard Cartridge CMS Dual Balanced Cartridge Double pressure balanced Dual seal Independent of direction of rotation Integrated pumping device Variants available: for eccentric screw pumps Technical Features Costeffective Easy installation due to preassembled unit (reduced downtimes) Extended service life Ideal seal for standardizations No damage of the shaft by dynamically loaded ORing Universal applicable for packings conversions, retrofits or OEM l (l) l7 l 1 8 0 1 18 Item 1 h 1 1 17,, 7, 10, 1, 1 11 10 1 d1 d d 7 11 1 1 1 Seal face ORing Spring Seat Shaft sleeve 8 Cover Seal face 11 Spring 1 Seat 1 Drive collar 1 Set screw 17 Snap ring 18 Assembly fixture 1 Hex socket head screw 0 Gasket 1 Screw plug

Typical Industrial Applications Chemical industry Food and beverage industry Petrochemical industry Pharmaceutical industry Universally applicable Water and waste water technology Centrifugal pumps Eccentric screw pumps Materials Seal face: Silicon carbide (Q1), Carbon graphite resin impregnated (B), Tungsten carbide (U) Seat: Silicon carbide (Q1) Secondary seals: FKM (V), EPDM (E), FFKM (K), Perfluorocarbon rubber/ptfe (U1) Springs: Hastelloy C (M) Metal parts: CrNiMo steel (G), CrNiMo cast steel (G) Performance Capabilities Sizes: d1 = Upto 100 mm (Upto.000 ) Other sizes on request Temperature: t= 0 C... 0 C (0 F... 8 F) (Check ORing resistance) Sliding face material combination BQ1 Pressure: p1 = bar ( PSI) Speed = 1 m/s ( ft/s) Sliding face material combination Q1Q1 or UQ1 Pressure: p1 = 0 bar (0 PSI) Speed = 10 m/s ( ft/s) Barrier fluid circulation system: pmax = bar ( PSI) Δp (p p1) ideal =... bar (... PSI), 7 bar (10 PSI) for barrier media with poor lubricating properties) Pump startup: Δp (p p1)max = bar ( PSI) allowed Recommended supply medium: max. ISO VG Permissible axial movement: ± 1.0 mm, d1 >= 7 mm ± 1. mm Installation, Details, Options a da º OUT IN IN OUT º S Standard Cartridge Dimensional Data Dimensions in inch d 1 d d min. d max. l l l l 7 a da s 1.000 1.1 1.0 1.7 1.00 1. 1.70 1.87.000.1.0.7.00..70.87.000.1.0.7.00..70.000 Dimensions in millimeter 1. 1.811 1.1.087.0..1.8.77.8.1.071.1..1.7.7.18.18.11.7..8.7 1.7 1.87.008.1..7.0.8.717.87.000.1.00.7.70.000.000...7.00..7.000.008.00..1.8.700.87..071..0.8.800.7....88.88.0.17.1.. 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.0.0.0.0.0.0.0.0.0.10.10.10.10.10.10.10.10.10.10.10.10.10.10.10.1.1.1.1.1.1.1.1.1 8 0 8 0 8 0 0 70 7 80 8 0 100.0.0 8.0.8.8.0.0 8.0 0. 0... 8.0 7.0 7.0 78.0 8.8.0 100.0 10. 10. 11. 11.1 1..0 7.0.0 1.0 1.0.0 7.0.0 1. 1..0 7.0.0 7.0 7.0 7.0 8.7.0 101. 108.0 111.1 117. 10.7 17.0 1..0.0 7.0 7.0 1..0 8.0. 70. 7.0 7.0 78.0 87.0 8.0 1.0 8. 108.0 118.0 1.0 18.0 1.0 18.0 1.0.................. 8.0 8.0 8.0 8.0 8.0 8.0 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 108.0 108.0 108.0 108.0 108.0 108.0........................ Note: Additional technical & dimensional information will be provided on request. 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.0.0.70.80.0.00.0.0.0.81.0.00.180.0.0.07.07.1.1.7.1.70.87.0 7 70 70 7 7 77 80 80 8 8 87 7 10 10 118 1 1 1 1 18 1.1.1.0..8.8...87.87.181.181.17.17 7.008 7.80 7.80 7.77 7.77 7.7 7.7 8.071 8.18 8.8 d 1 d d min. d max. l l l l 7 a da s 10 10 10 110 110 11 1 1 1 1 18 18 18 18 18 17 1 178 10 1 18 0 08 18 0.0 0.0 0.0 0.0 0.0 0. 0. 0. 0. 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.8 0.8 0.8 0.8 0.8 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 18.0 18.0 18.0 18.0 18.0 18.0 18.0.0.0.0.0 11

Standard Cartridge ECS Single seal Balanced Cartridge Independent of direction of rotation Single seals with flush and quench l 1 l l l Technical Features Costeffective No damage of the shaft by dynamically loaded ORing No dimensional modification of the seal chamber necessary, small radial installation height Universal applicable for packings conversions, retrofits or original equipment Typical Industrial Applications Chemical industry Food and beverage industry Petrochemical industry Pharmaceutical industry Process Pumps Water and waste water technology d max. d min. d d 1 7 1 1 1 10 1 11 8 Standards ANSI Materials Seal face: Silicon carbide (Q1), Carbon graphite resin impregnated (B), Tungsten carbide (U) Seat: Silicon carbide (Q1) Secondary seals: FKM (V), EPDM (E), FFKM (K), Perflourocarbon rubber/ptfe (U1) Springs: Hastelloy C (M) Metal parts: CrNiMo steel (G), CrNiMo cast steel (G) Performance Capabilities ECSSN, Sizes: Upto 70 mm (.7") Other sizes on request Temperature: t = 0 C... 0 C (0 F... 8 F) (Check ORing resistance) Sliding face material combination BQ1 Pressure: p1 = 0 bar (0 PSI) Speed = 11. m/s Permissible axial movement: ± 1.0 mm l Item 1,, 7 8 Seal face ORing Spring Seat Shaft sleeve Drive collar Set screw Item 10 11 1 1 1 1 Snap ring Cover Assembly fixture (remove after installation) Screw Plug Gasket 11

DRAI N Installation, Details, Options s 1 FLUS H Standard Cartridge d a a 1 Dimensional Data Dimensions in inches d 1 d d min. d max. l 1 l l l l a 1 d a s 1.000 1.1 1.0 1.7 1.00 1. 1.70 1.87.000.1.0.7.00..70 1.81 1.0.08.10..8.00.18.81.8.01.01.0.0.8 1..07.1..1.8.77.7.01.110.8...81.1.0.80..77.87.01.110.8...1.88.7................. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.78 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1.80..717.7..110.18.07...70.7.0.1.7.0.0.0.8.1..1.1.0.0.10... 7.087 0. 0. 0. 0. 0.7 0.7 0.7 0.7 0.8 0.8 0.8 0.8 0.8 0.8 0.8 Connnection 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT Dimensions in millimeter d 1 d d min. d max. l 1 l l l l a 1 d a s 8 0 8 0 8 0 8 0 8 70.. 8. 1... 8. 0. 1... 8. 71. 7. 7. 78. 81. 8. 8. 88. 0 7 7 8 71 7 77 7 8 87 0 7 107 0 1 8 7 7 77 78 7 8 8 88 0 8 101 10 108 118 Note: Additional technical & dimensional information will be provided on request 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 70 7 7 7 80 81 8 87 100 10 10 110 10 10 10 10 10 11 1 1 1 1 10 10 10 10 10 1 10 1 1 170 180 1. 1. 1. 1. 1. 1.7 1.7 1.7 1.7 1.7 1.7 1.7 17. 17. 17. 17. 17. 17. 17. 17. Connnection 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 1/8" NPT 117

Standard Cartridge º 8. 7. G1/" 0º 1 10 1 1 1 17 7 8 11 1 1 118 Item 1,, 7 10,1,1,1 8 Seal face ORing Spring St.Seat Shaft sleeve Cover 'X' Performance Capabilities VMSSN, SNO, QN, TN Sizes: Upto 100 mm (Upto.000") Other sizes on request Temperature: t= 0 C... 0 C ( 0 F... 8 F) (Check ORing resistance) Sliding face material combination BQ1 Pressure: p1 = bar ( PSI) Speed = 1 m/s ( ft/s) Sliding face material combination Q1Q1 or UQ1 Pressure: p1 = 1 bar (17 PSI) Speed = 10 m/s ( ft/s) Permissible axial movement: ± 1.0 mm, d1 7 mm ± 1. mm Item 11 1 1 17 18 1 Seal Face Spring Driver Set screw VMS Dual Retaining Ring Assembly Fixture Hsh Cap Screw Additional variants available for ANSI pumps Balanced Cartridge Independent of direction of rotation Single seal also available Technical Features Costeffective Easy installation due to preassembled unit (reduced downtimes) Ideal seal for standardizations No damage caused by dirt entered during assembly No damage of the shaft by dynamically loaded ORing Universal applicable for packings conversions, retrofits or original equipment Coments VMS CMS seals with modified cover for eccentric screw pumps. Example Pumps: Seepex BN, Netzsch NM...S, NM...B, NE (P), Allweiler AE, AEB, AED, Robbins & Myers / Moyno 000 CC, and Mono ERange. Typical Industrial Applications Foodstuffs and animal feed industries Sweet cider pressing and beverage production Viticulture and wineries Spirit production and alcohol industry Breweries and malt houses Sugar industry Pharmaceuticals and cosmetics industry Oil and gas industry Pulp and paper production Paint and lacquer industry Chemicals industry Automobile industry Water and wastewater industry Standards ANSI Materials Seal face: Silicon carbide (Q1), Carbon graphite resin impregnated (B), Tungsten carbide (U) Seat: Silicon carbide (Q1) Secondary seals: FKM (V), EPDM (E), FFKM (K), Perflourocarbon rubber/ptfe (U1) Springs: Hastelloy C (M) Metal parts: CrNiMo steel (G), CrNiMo cast steel (G) 118

Independent of direction of rotation Metric and inch sizes available Single cartridge seal Unbalanced Technical Features Comes with flush connection acc. to API 8, Plan 11 for seal chamber cleaning and cooling Economical cartridge solution Fits into any installation space due to smallest outer diameter No modifications of the pump's installation chamber necessary Straightforward and easy installation Typical Industrial Applications Water and waste water technology Sewage water Cold and hot water Cooling fluids Beverages Circulating pumps Water and waste water pumps UMS l l1 l 1 0º Standard Cartridge Materials Seal face: Carbon graphite resin impregnated (B) Silicon carbide (Q1) Seat: Silicon carbide (Q1) Secondary seals: FKM (V), EPDM (E) Metal parts: CrNiMo steel (G), CrNiMo cast steel (G) Performance Capabilities Shaft diameter: dn =... 7 mm (1"....") Pressure: p1 = 1 bar (17 PSI) Temperature: t = 0 ºC... 10 ºC (ª F... 8 ºF) Sliding velocity: vg = 10 m/s ( ft/s) Axial movement: ± 0. mm Stationary Seats d d d 7 1. 1.1 11 1 1. 1. 8 10 h dn 1 1 0º l l l8 l10 (EN 17) d H11 d7 H8 Item 1 1.1 1. 1. 1. Bellows unit Seal face Bellows Drive collar Lring (spring collar) Spring Seat (G0) ORing or corner sleeve Spacer ring Shaft sleeve Item 7 8 10 11 1 1 1 1 Oring Cover Gasket Drive collar Set screw Snap ring Assembly fixture Socket head screw Screw plug 11

Standard Cartridge d f7 d (h) d l 7 1 10 1 1 1 1 8 17 1 11 0 18 1 l l1 LBO LBI d1 h 1 d Item 1,,, 7, 10, 1, 1, 1, 17, 11, 1 8 1 18 1 0 1 d Seal face ORing Spring Seat Shaft sleeve Adapter Driver Housing HSH Cap screw Set ring Set screw Assembly fixture Hexagon bolt Set screw CMSAPI Balanced Cartridge construction Category 1, Type A, Arrangement 1, or Dual seals with API Plan / (CMSAPIDAP) Other flush plans available Seal design according API 8 / ISO 10 Shrinkfitted seal faces Single and dual seals Single seal with API Plan 11 and 1 (CMSAPISA) Solid seats Version with independent direction of rotation available Technical Features Accommodates shaft deflections and process fluctuations Good heat dissipation Low space requirements Preassembled unit, ready to install Springs protected from the product Suitable for pressure reversal Typical Industrial Applications Chemical industry Light volatile and highly viscous hydrocarbons Low solids content and low abrasive media Media with poor lubrication properties Oil and gas industry Petrochemical industry Toxic and hazardous media Standard pumps Vertical and horizontal ANSI chemical pumps Standards API 8 / ISO 10 Materials Seal face: Carbon graphite antimony impregnated (A), Silicon carbide sintered pressureless (Q1) Seat: Silicon carbide sintered pressureless (Q1) Secondary seals: FKM (V), FFKM (K), NBR (P), EPDM (E) Springs: Hastelloy C (M)* and C7 (M) Metal parts: CrNiMo steel (G) Performance Capabilities Sizes: d1 = Upto110 mm (Upto.0 ) other sizes on request Pressure: p1 = bar (1 PSI) Temperature: t = 0 C 0 C (0 F...00 F) (>0 C (8 F) please enquire) Speed = m/s (7 ft/s) 10

l Design Variations l1 F Q Standard Cartridge (h) CMSAPISA Single Seal d f7 d 7 1 0 1 8 18 1 d d1 h d d l D Dimensional Data Dimensions in millimeter d 1 0 0 0 0 0 70 7 80 8 0 100 10 110 d 0.. 0.. 70. 7. 80. 8. 101 10 111 11 1. 18. 1. 18. 1. 1. d 8 8 7 78 8 88 10 110 11 10 1 1 11 1 11 1 11 inch size available from size 0.70 to.0 Note: Additional technical & dimensional information will be provided on request. d 10 110 11 10 1 1 10 1 10 1 170 17 18 10 1 00 0 10 1 d 17 1 17 1 17 1 17 17 187 1 17 0 1 8 8 8 l l 1 l d anz acc to ASME B7.1 (h min)...... 100 100 17. 17. 17. 17. 17. 11. 11. 11. 11. 11. 11. 8. 8. 8. 8. 8. 8. 7 7 88 88 88 88 88 8 8 8 8 8 8 8 8........... 1. 1. 1. 1. 1. 17. 17. 17. 17. 17. 17. 17. 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0........... 11

Standard Cartridge P70VN Cartridge unit Category and, Type A, Arrangement 1 Design acc. to API 8 / ISO 10 Independent of direction of rotation Integrated pumping device available (P70VP) Rotating multiple springs Single seal Technical Features "LowEmissionSeal" acc. to the American STLElimits Extended field of operation in terms of temperature and pressure Fits to any seal chamber Metal parts also in special materials available l l (l) l11 l7 Q F 1.1. 1.1.7 1.1. 1.1.1 1. 1.1.1.1. 1.1. 1. 7 1 1 d d d1 H d H7 d d 11 10 D Item Item 1.1.1 Seal face Shaft sleeve 1.1. Driver Housing 1.1. Thrust ring Insert 1.1., 1. ORing 7 Throttle ring 1.1. Sleeve Washer 1.1. Spring 10 Assembly fixture 1.1.7 Set screw 11 Hexagon bolt Seat 1 Set ring 1 Set screw 1. 1

Typical Industrial Applications Light hydrocarbons Oil and gas industry Petrochemical industry Refining technology API 10 / ISO 170 pumps Process pumps Performance Capabilities Sizes: d = Upto 110 mm (Upto.0 )* Pressure: p1 = 0 bar (80 PSI) Temperature: t = 0 C... +0 C (0 F... 8 F) Speed = m/s (7 ft/s) Permissible axial movement: ±.0....0 mm depending on diameter and installation situation Standards API 8 / ISO 10 Materials Seal face: Carbon graphite antimony impregnated (A) Seat: Silicon carbide (Q1, Q) Secondary seals: EPDM (E), NBR (P), FKM (V), FFKM (K) Springs: Hastelloy C (M) Metal parts: CrNiMo steel (G), Duplex (G1), Hastelloy C (M) Design Variations P70VP Dimensions, items and descriptions as P70VN, but with pumping ring. Shorter installation length possible. P70N Dimensions, items and description as P70VN. Seal face: Silicon carbide (Q1, Q) Seat: Silicon carbide (Q1, Q) Standard Cartridge Dimensional Data Dimensions in inch API/d 1 API/d API/d API/d d d l l l l 7 l 11 Overall length 0.70 1.1 1.00.000.0.70.1.00.70.0.7.10..7.7.118.1.. 7.087 Dimensions in millimeter.1.8.1.1.. 7.087 8.071 8. 8.88..70.1.8.1.70.10.80 7.8 7.77 1..1.8.8.88.1.8.07.0.1..87.0.1 7.0 7.7 8.18.70.7 10.17 Note: Additional technical & dimensional information will be provided on request..70.7.1.0.7.0.07.07...701.88.878.17.01.17.17.17.1.1 0.0 0.08 0.7 0.7 0.78 0.70 0.0 0.0 0. 0...01.01.01.18.18.18.18.18.18 0. 0. 0. 0. 0. 0. 0. 0. 0. 0..7.0.1.1.. 7.087 8.071 8. 8.88 API/d 1 API/d API/d API/d d d l l l l 7 l 11 Overall length 0 0 0 0 0 70 80 0 100 110 70 80 0 100 10 10 10 10 170 180 10 11 1 10 10 170 180 0 1 8 10 11 1 1 1 17 18 1 0 7 8 10 11 1 1 18 18 18 18 18 188 18 08 8 8 8.0 100. 10. 111. 10. 1. 1.0 1.0 1.0 1.0.0 8.0 8.. 10.0 10.0 10.0 10.0 10.0 10.0 1.0. 7.0 1.0 18. 18.0.0.0.0.0 7.0 77.0 77. 78. 81.0 81.0 81.0 81.0 81.0 81.0 100 10 1 10 10 170 180 0 1 1

Standard Cartridge l P70VK Bidirectional design available Cartridge unit Category and, Type A, Arrangement or Design acc. to API 8 / ISO 10 Dual seal Integrated pumping device available Rotating multiple springs Suitable for pressure reversals Technical Features Extended field of operation in terms of temperature and pressure Fits to any seal chamber Metal parts also in special materials available Optimized torque transmission Safe operation due to metal torque transmission at the rotating seat l l l10 l7 LBO 1 1 d d H7 d d1 H 1.1.7 1.1. 1.1. 1.1.1 1..1..1..1.1. 1 1 1 1.1. 1.1. 1.1. 1. 8.1..1..1.. 11 d d LBI Item Item 1.1.1,.1.1 1.1.,.1. 1.1.,.1. 1.1.,.1., 1.,. 1.1.,.1. 1.1.,.1. 1.1.7 1.,. Seal face Driver Thrust ring ORing Sleeve Spring Set screw Seat Shaft sleeve Key 8 11 1 1 1 1 1 Adapter Washer Pin Housing HSH cap screw Assembly fixture Hexagon bolt Set ring Set screw 1

Typical Industrial Applications Light volatile and highly viscous hydrocarbons Oil and gas industry Petrochemical industry Refining technology API 10 / ISO 170 pumps Process pumps Performance Capabilities Sizes: d = Upto 110 mm (Upto.0 )* Pressure: p1 = 0 bar (80 PSI) Temperature: t = 0 C... +0 C ( 0 F...8 F) Speed = m/s (7 ft/s) Permissible axial movement: ±.0....0 mm depending on diameter and installation situation Standards API 8 / ISO 10 Materials Seal face: Carbon graphite antimony impregnated (A), Silicon carbide (Q1, Q) Seat: Silicon carbide (Q1, Q) Secondary seals: EPDM (E), NBR (P), FKM (V), FFKM (K) Springs: Hastelloy C (M) Metal parts: CrNiMo steel (G), Duplex (G1), Hastelloy C (M) d d H7 d1 H Design Variations LBO P70VKD Dual seal in backtoback arrangement. Suitable for API 10 table seal chambers. LBI d d Standard Cartridge Dimensional Data Dimensions in inch API/d 1 API/d API/d d l l l l 7 0.70 1.1 1.00.000.0.70.1.00.70.0 Dimensions in millimeter API/d 1 API/d API/d d l l l l 7 0 0 0 0 0 70 80 0 100 110.7.10..7.7.118.1.. 7.087 70 80 0 100 10 10 10 10 170 180.1.8.1.1.. 7.087 8.071 8. 8.88 * For larger installation space an axial movement of ± 0.118" is possible 10 11 1 10 10 170 180 0 1.07.7.8.1 7.0 7.7 8.18.70.7 10.17 1 1 1 18 188 18 08 8 8 8 * For larger installation space an axial movement of ±.0 mm is possible Note: Additional technical & dimensional information will be provided on request...78.78.0...80 7.0 7.8 7.0 1.0 1. 1. 18.0 1.0 170.0 17.0 178.8 18.0 188.0.81.780.7.1....0..87 7.0.0. 10. 107. 107. 107. 11. 117. 11. 1.80 1. 1..08..1.7.7.7.81 7.0. 0.0 1. 7.. 7. 1. 7. 71..18.01.071..1...717..8 81.0 77. 78.0 88.0 0. 8.0 8.0..0 1.0 1

Metal Bellow SFL80N Balanced For shafts without a step Independent of direction of rotation Metal bellows rotating Single seal Technical Features For extreme temperature ranges No dynamically loaded ORing Pumping screw for highly viscous media available Short installation length possible Typical Industrial Applications Chemical industry Cold media Highly viscous media Hot media Power plant technology Refining technology l1k ±0, (l) ±0, Standards l ±0, l8 0 º d8 l l H8 d7 H11 1.1 h 1. d1 d 1. d EN 17 Performance Capabilities Sizes: d1 = Upto 100 mm (Upto.000 ) Externally pressurized: p1 = bar ( PSI) Internally pressurized: p1 <10 C (8 F) 10 bar (1 PSI) p1 <0 C (8 F) bar (7 PSI) Temperature: t = 0 C +0 C (0 F 8) F Stationary seat lock necessary. Speed = 0 m/s ( ft/s) Materials Seal face: Carbon graphite antimony impregnated (A), Silicon carbide (Q1) Seat: Silicon carbide (Q1) Bellows: Inconel 718 hardened (M), Hastelloy C7 (M) Metal parts: CrNiMo steel (G), Duplex (G1), Hastelloy C (M) Stationary Seats l 1.1 7/81 Seal face with bellows unit 1. 1. 1.1 0 7 1. O Ring Set Screw Seat (G) O Ring DIN 0 1 l1 l18 d7 H8 Part no. d Item H11 0º l G1 (l1k shorter than specified by EN 17)

SFL00N Shaft diameter: d1= Upto 100 mm (Upto.000 ) Internally pressurized: p1 = 1 bar ( PSI), stationary seat lock necessary. Externally pressurized: p1 = 10 bar (1 PSI) Temperature: t = 0 C.. +0 C (0 F +8 F) Sliding velocity: vg = 0 m/s ( ft/s) UFL80P / UFL00P Version with pumping ring. Dependent on direction of rotation. Can be retrofitted. Design Variations SFL80F Dimensions, items and description as for SFL80N, but with pumping screw (item no. 1.). Dependent on direction of rotation. The pumping screw can be retrofitted. ds 0,0 0, 1. Metal Bellow Dimensional Data Dimensions in millimeter d 1 d d d 7 d 8 d s l 1K l l l l 8 l l 18 l 1 b s 1 0 7 8.*). 1. 17. 10 1..0 18 7 0. 1 11. 1 7.0 1. 10.0 0. 1 0. 1 11. 1 7.0 1. 10.0. 1 7 0. 1 11. 1 7.0 1. 10.0 7 0 8. 1. 11. 1 7.0 1. 8.. 0 8 0 8. 1. 11. 1 7.0 1. 8. 8.8 7 1. 1 1. 11. 1 7.0 1..0 0. 1 1. 11. 1 7.0 1. 8. 8. 1 1. 11. 1 7.0 1.. 8 8. 1 1. 11. 1 7.0 1... 0 8. 1 1. 11. 1 7.0 1.. 8. 1 1 1 1 8.0 1.. 0. 1 8 1 1 1 8.0 1.. 7. 1 7 1 1 1 8.0 1.. 8.7 1 1 1 8.0 1.. 8 1. 7 1 1 1 8.0 1.. 0 70 7 7... 1 17. 1. 10. 8. 7 77 7... 1 17. 1. 10. 70 7 7 80 7... 1 17. 1. 10.0 8 71.7 70 78 8. 7.. 1 18 10..0 1.0 0 7. 7 80 8. 7.. 1 18 10..0 1.0 7 7 8 88. 7.. 1 18 10..0 1.0 8.1 77 8. 7.. 1 18 10..0 1.0 8 87. 81 0... 7 18 18. 11.0 1. 10.0 70 87. 8 0. 7 18 1 11..0 17.0 7 88 7 10 0. 7 18 1 11..0 1.0 80 8. 10 10 0 1.8 7. 18. 1 11..0 1.0 8 10.7 100 110 11 0 1.8 7. 18. 1 11..0 1.0 0 111 10 11 11.8 7. 18. 0. 1.0.0 1.0 11 110 10 1 7.8 7. 17. 0. 1.0.0 1.0 100 117. 11 1 1 7.8 7. 17. 0. 1.0.0 0.0 * Installation length is longer than l 1k specified by EN 17 inch size available from size 0. to.000 Note: Additional technical & dimensional information will be provided on request. 17

Metal Bellow SFL0 Balanced Independent of direction of rotation Single Seal Stationary bellows Technical Features For high temperature High sliding velocities No elastomer secondary seals Materials Bellows: Inconel 718 (M), Hastelloy C7 (M) Seal face: Carbon graphite antimony impregnated (A), Silicon carbide (Q1) Seat: Silicon carbide (Q1), Special cast CrMo steel (S) Metal parts: Duplex (G1), Carpenter (T), Hastelloy C (M) l ±0, t mx 1 Typical Industrial Applications d H8 d1 d 1. d 1.1 d d Chemical industry High sliding velocities Hot media Power plant technology Refining technology Performance Capabilities Sizes: d1 = Upto 100 mm (Upto.000 ) Externally pressurized: p1 = bar ( PSI), (higher pressure possible, please inquire) Internally pressurized: p1 <10 C (8 F) 10 bar (1 PSI), p1 <0 C (8 F) bar (7 PSI), p1 <00 C (7 F) bar ( PSI) Stationary seat lock necessary. Temperature: t = 0 C... 00 C ( F... +7 F) Speed = 0 m/s (1 ft/s) Item Part no. 1.1 1. 7/81 Seal face with bellows unit 00.1 Flat gasket Seat 7 Design Variations SFL0 Shaft diameter: d1 = Upto100 mm (Upto.000 ), (>100 mm on request) Internally pressurized: p1 = 1 bar ( PSI), (higher pressure possible, please enquire) Externally pressurized: p1 = 10 bar (1 PSI), stationary seat lock necessary. Temperature: t = 0 C... +00 C ( F... +7 F) Sliding velocity: vg = 0 m/s (1 ft/s) DIN 0 Dimensional Data Dimensions in millimeter d1 d d d d d l n xmx t 1 11 0. 0...0. xm 0. 8.8.8.0. xm 0 0 1. 0. 8..0. xm 1.0.8 0.8.0.0 xm 0 0 1.0 0 1...0 0. xm 1.0. 0..0. xm 1 1.0.7.7 7. 0. xm 7 0 0 1.0 70 70.. 8.0.0 xm 7 70 170 71.0 80 8.8 7.8.0 8.0 xm 7 8 718 8. 8.0.0 11.0 1.0 xm 7 88 888 8. 100 107.7 101.7 10.0 7.0 xm 7 100 8100 101.0 11 11.7 10.7 10.0 7.0 xm 7 d inch size available from size 0. to.000 Note: Additional technical & dimensional information will be provided on request. 18

Balanced For shafts without a step Independent of direction of rotation Metal bellows rotating Single Seal Technical Features For extreme high temperature ranges No dynamically loaded ORing Pumping screw for highly viscous media available Self cleaning effect Short installation length possible Typical Industrial Applications Chemical industry Highly viscous media Hot media Power plant technology Refining technology Materials Seal face: Carbon graphite antimony impregnated (A), Silicon carbide (Q1) Seat: Silicon carbide (Q1) Bellows: Inconel 718 hardened (M), Hastelloy C7 (M) Metal parts: CrNiMo steel (G), Duplex (G1), Carpenter (T), Hastelloy C (M) Performance Capabilities Sizes: d1 = Upto 10 mm (Upto.000 ) Externally pressurized: p1 = bar ( PSI) Internally pressurized: p1 <10 C (8 F) 10 bar (1 PSI) p1 <0 C (8 F) bar (7 PSI) p1 <00 C (7 F) bar ( PSI) Stationary seat lock necessary Temperature: t = 0 C.. +00 C (18 F.. +7 F) Speed = 0 m/s ( ft/s) SFLWT Design Variations UFLWT00 Shaft diameter: d1 = Upto10 mm (Upto.000 ) Internally pressurized: p1 = 1 bar ( PSI) Externally pressurized: p1 = 10 bar (1 PSI) Temperature: t = 0 C... +00 C ( F...+7 F), stationary seat lock necessary. Speed: Vg = 0 m/s ( ft/s) Item 1.1 1. 1. 1. 1. Part no. 7/81 Seal face with bellows unit 10 Sealing Ring 7 Drive Collar Socket head screw 0 Set screw 7 Seat 1 Sealing Ring DIN 0 Dimensional Data d d1 h f mx l1 ±0, (l) 1. 1. 1. 1.1 1. k ±0, l 0º l8 l l Dimensions in millimeter d 1 d d d 7 d 8 l 1 l l l l 7 l 8 l f k m x 1 18 0 8 0 8 0 8 0 8 0 8 70 7 80 8 0 100 8 0 7 0 7 0 71 7 7 7 81 8 87 0 7 10 107 11 117 1 17.0 1.0.0 7.0 7.0.0.0.0.0.0 1.0.0.0.0.0.0 7.0 70.0 7.0 7.0 77.0 81.0 8.0 88.0 88.0.0 100.0 10.0 110.0 11.0 1..0 7.0 0.0.0.0.0 8.0 0.0.0.0 8.0 1.0.0.0 70.0 7.0 7.0 78.0 80.0 8.0 8.0 0.0.0 7.0 7.0 10.0 110.0 11.0 10.0 1.0 1. 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 0. 0. 0. 0. 1. 1...... 8.0 8.0 71.0 71.0 71.0 71.0 71.0 71.0 71.0 71.0 71.0 7.0............ 7. 7. 7. 7. 7. 7. 7..0.0.0.0.0.0.8.8.8.8.8.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0............0.0.0.0.0.0 7 7 7 7 7 7 7 7 7 11 1. 1. 1. 1. 1. 1. 1. 1..0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0..... 0.0 11. 11. 11. 11. 11. 11. 11. 11. 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 18.0 18.0 18.0 18.0 18. 18. 18. 17. 17. 0.0 M M M M M M M M M M M M M M M M M M M M inch size available from size 0. to.000 Note: Additional technical & dimensional information will be provided on request. l7 ±0, d8 H11 d Metal Bellow d7 H8 1

Dual Seals S7D Dual seal For plain shafts Independent of direction of rotation Rotating multiple springs Seal concept based on the S70 range Unbalanced Variant with pumping screw available (S7FD) l1 l l1 1.1 1.7 1. 1. 1.8 1. l8 ds0,0 d8 l Item Part no. Seal face 1. 7. Seal face 1. 7 Thrust ring 1. 8 Drive collar 1. 77 Spring 1. 0 Set screw 1.7 1.1 ORing 1.8 1. ORing 7.1 Seat (G) 1. ORing 7. Seat (G) 1. ORing DIN 0 EN 17 Torque Transmissions d1 > 100 mm (.000 ) Torque transmission by set screws with cone point. Offset: 0 t 7.1 1) d1 > 100 mm: 0 ) d1 > 100 mm: +0.1 10 Standards 1.1 l d e8 l Spring loaded drive pin (S7D) (>100 0,1) 0, 1. 1. º 0 H8 (>100 = h8) d1 H d mx d7 l H11 l d l7 +0, Technical Features Flexibility in torque transmissions Pumping screw for media with higher viscosity also possible Self cleaning effect Short installation length also possible Suitable for media with low solids contents Versatile application possibilities EN 17 (For connection dimensions d1 upto 100 mm ) Typical Industrial Applications Adhesives Chemical industry Low solids content and low abrasive media Media with poor lubrication properties Process industry Toxic and hazardous media Chemical standard pumps Design Variations S7FD Dimensions, items and descriptions as for S7D, but with pumping screw (Item no. 1.). Dependent on direction of rotation. Viscosity ISO VG10). Performance Capabilities Sizes: d1 = Upto 00 mm (Upto 7.87 ) Pressure: p1 = bar ( PSI) Temperature: t = 0 C... 0 C (8 F 8 F) Speed = 0 m/s ( ft/s) Permissible axial movement: d1 from 100 mm: ±.0 mm Materials Seal face: Special cast CrMo steel (S), Silicon carbide (Q1, Q) Seat G: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B), Silicon carbide (Q1*, Q*) Seat G: Silicon carbide (Q1*, Q*) Seat G: Silicon carbide (Q1*, Q*) Seat G1: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B) * Cannot be combined with seal face made of S

l G (EN 17) l l8 l10 d d7 H8 0º H11 G l1 l1 l1 l1 d11 +0,1 d1 H7 0º R G1 l1 l1 l1 l11 d11 +0,1 d1 H7 0º R Dimensional Data d > 00 on request 1 inch size available from size 0.70 to 7.87 Note: Additional technical & dimensional information will be provided on request. d 1 d d d 7 d 8 d d 11 d 1 d s l 1 l l l l l 7 l 8 l l 10 l 11 l 1 l 1 l 1 l 1 l 1 l 8 l 1 l m x t R 18 0 8 0 8 0 8 0 8 0 8 70 7 80 8 0 100 10 110 11 10 1 10 1 10 1 10 1 10 1 170 17 180 18 10 1 00 7 0 7 8 0 7 0 7 70 7 7 81 8 8 8 1 10 10 11 11 1 18 1 18 1 18 1 18 17 178 18 11 1 01 0 11 1 1 1 7.0.0.0.0.0 7.0.0.0.0.0.0 1.0.0.0.0.0.0 7.0 70.0 7.0 7.0 77.0 81.0 8.0 88.0.0 100.0 10.0 110.0 11.0 1. 18. 1. 18. 1. 1. 1. 1. 11. 18. 17. 178. 18. 188. 1. 07. 1. 17.. 7..0.0 7.0.0 0.0.0.0 8.0 8.0 0.0.0 8.0 1.0.0.0 70.0 7.0 7.0 78.0 80.0 8.0 8.0 0.0.0 7.0 10.0 110.0 11.0 10.0 1.0 1. 10. 18. 10. 1. 18. 1. 18. 17. 180. 18. 10. 1. 00. 0. 1..... 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7.0...0.0.0.........7 0.8.8.. 71. 7. 7. 8.7 8.0 0.. 100. 10. 111. 11. 0.0.0.0 8.0 8.0.0.0 8.0 0.0.0.0 8.0.0.0 8.. 7. 7. 78. 80. 8. 8. 1..0.0 10.0 10.0 11.0 10. 1. 7 1 1 1 71 7 7 8 8 88 10 10 11 11 1 1 1 18 1 18 1 18 17 178 18 188 1 01 0 11 1 1 1 1 1.0 1.0 1.0 1.0 1.0.0.0.0.0.0.0 70.0 70.0 70.0 70.0 7.0 7.0 7.0 8.0 8.0 8.0 8.0 1.0.0.0... 0. 0. 108.0 110.0 110.0 110.0 110.0 110.0 110.0 110.0 110.0 11.0 17.0 17.0 17.0 17.0 17.0 1.0 1.0 1.0 1.0 1.0 8 8 8 8 8 1 8 70 70 70 70 70 70 70 70 70 7 7 7 7 7 7 7 7 7 7 1.0 1.0 1.0 1.0 1.0 1. 1. 1. 1. 1. 0. 1.0 1.0 1.0 1.0 1. 1. 1. 8.0 8.0 7. 7. 7. 8.0 8.0 8.0 8.0 8.0 8.0 8.0.0.0.0.0.0.0.0.0.0.0...........0.0.0.0.0.0.0.0.0.0.0.0.0.0.0...........0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 7 7 7 7 7 7 7 7 10 10 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1. 1. 1. 1. 1. 1. 1. 1. 1. 1..0.0.0.0.0.0.0.0.0.0.0.0.0.0.0..... 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0.0.0.0.0.0.0 8.0 8.0 8.0 8.0 11. 11. 11. 11. 11. 11. 11. 11. 11. 11. 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 18.0 18.0 18.0 18. 18. 18. 17. 17. 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0.0.0.0.0.0.0 8.0 8.0 8.0 8.0 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 10.0 10.0 10.0 10.0 10.0 10. 1.0 1.0 1.0 1.0 1.0 1.0 1. 1. 1. 1.0 1.0 1.0 1.0 1.0 1. 1. 1. 1. 1. 1.0 1.0 1.0 1. 1. 1. 1. 17.0 17.0 17.0 17.0 17.0 18.0 18.0 18.0 18.0 18.0 1.0 18.0 18.0 1.0 1.0 1.0 0.0 0.0.0 8. 8. 8. 8. 10.0 11. 11. 1.0 1.0 11. 11.8 1. 1.8 1.8 1.8 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1.0 1.0 17.0 17.0 10.0.... 11.0 11.0 11.0 11. 11. 11. 11. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1.0 1. 1. 1. 1. 1. 17. 17. 8.0 7. 7. 7. 7..0 10. 10. 10. 11.0 10. 10.8 1.0 11. 11. 11. 1. 1. 1. 1. 1. 1.0 1.7 1.0 1.0 1.0 1.8 1.8 1.8 1.8 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1..0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 7. 7. 7. 7. 7. 7. 7. 7. 7. 7..0.0.0.0.0. 11.0 11.0 11.0 11.0 11.0 11.0 11. 11. 11. 1.0 1.0 1.0 1.0 1.0 17.0 17.0 17.0 17.0 17.0 17. 17. 17. 17. 17. 18. 1.0 1.0 1.0 1.0 1. 1. 1..........0..0.0 0. 1. 1. 1. 1. 1. 1. 1. 1. 1.......... 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 M M M M M M M M M M M M M M M M M................................................. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1................... Dimensions in millimeter Stationary Seats 11 Dual Seals

Dual Seals P7D Balanced Dual seal For stepped shafts Independent of direction of rotation Rotating multiple springs Seal concept based on the P70 range Variant with pumping screw available (P7FD) Technical Features Flexibility in torque transmissions Pumping screw for media with higher viscosity also possible Self cleaning effect Short installation length possible Suitable for media with low solids contents EN 17 (For connection dimensions d1 upto 100 mm) l1 l l1 l l mx 1.11.7. R1 1. 1. 1.1. 1.8 1. d h >100 h8 d7 H8 d H11 l8 10 º l8 d1 d l7+0. ) 0º d8 l l Item Part no. 1.1 7.1 Seal face 1. 7. Seal face 1. 7 Thrust ring 1. 8 Drive collar 1. 77 Spring 1. 0 Set screw 1.7 1.1 ORing 1.8 1. ORing 7.1 Seat (G) 1. ORing 7. Seat (G) 1. ORing DIN 0 1) d1 > 100 mm: mm x 0 ) d1 > 100 mm: 0 ) d1 > 100 mm: B700 ) d1 > 100 mm: +0.1 1 l l Materials Seal face: Silicon carbide (Q1, Q), Carbon graphite antimony impregnated (A), Aluminium oxide (V), Special cast CrMo steel (S) Seat G: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B), Silicon carbide (Q1*, Q*) Secondary seals: EPDM (E), NBR (P), FKM (V), FFKM (K) Springs: CrNiMo steel (G) Metal parts: CrNiMo steel (G), Duplex (G1) * Cannot be combined with seal face made of S Typical Industrial Applications Adhesives Chemical industry Media with poor lubrication properties Medias with low solids content and abrasive particles Process industry Toxic and hazardous media Chemical standard pumps Performance Capabilities Sizes: d1 = Upto 00 mm (Upto 7.87 ) Pressure: p1 = 80 bar (110 PSI) for d1 = 1... 100 mm, p1 = bar ( PSI) for d1 = 100... 00 mm, p1 = 1 bar ( PSI) for d1 > 00 mm Temperature: t = 0 C... 0 C (8 F 8 F) Speed = 0 m/s ( ft/s) Permissible axial movement: d1 up to 100 mm: ± 0. mm d1 from 100 mm: ±.0 mm Standards EN 17 Torque Transmission d 10 mm VIA set screws with cone points. (standard arrangement)

P7FD Dimensions, items and descriptions as for P7D, but with pumping screw (Item no. 1.) Dependent on direction of rotation. 0. ds 0.0 (>100 0.1) Design Variations 1 Dimensional Data d > 00 on request 1 inch size available from size 0. to 7.87 Note: Additional technical & dimensional information will be provided on request. 1 1 18 0 8 0 8 0 8 0 8 0 70 7 80 8 0 100 10 110 11 10 1 10 1 10 1 10 1 10 1 170 17 180 18 10 1 00 18 0 8 0 8 8 0 8 0 8 0 8 70 7 80 8 0 100 10 11 10 1 10 1 10 1 10 1 10 1 170 17 180 18 10 1 00 0 10 7 1 8 0 7 0 7 70 7 7 81 8 8 8 1 10 10 11 11 1 1 18 1 18 1 18 17 178 18 11 1 01 0 11 1 1 1 0 1 7 1 7 1 7 70 7 7 77 8 88 100 10 110 11 1. 18. 1. 18. 1. 1. 1. 1. 11. 18. 17. 178. 18. 188. 1. 07. 1. 17.. 7. 7 7 0 8 8 0 8 1 70 7 7 78 80 8 8 7 10 110 11 10 1 1. 10. 18. 10. 1. 18. 1. 18. 17. 180. 18. 10. 1. 00. 0. 1......0...0.0.0.........7 0.8.8.. 71. 7. 7. 8.7 8.0 0.. 100. 10. 111. 11. 0 8 8 8 0 8 8.. 7. 7. 78. 80. 8. 8. 1..0.0 10.0 10.0 11.0 10. 1. 7 1 1 71 7 7 8 8 88 10 10 11 11 1 1 1 1 18 1 18 17 178 18 188 1 01 0 11 1 1 1 1 0 7 7 7 7 7 77 77 77 77 7 7 80 8 8 8 8 8 7 7 10 10 10 8 11. 11. 11. 11. 11. 110. 110. 1 1 1 1 1 1 1 1 1 17 11 11 11 11 11 1 1 1 11 11 18 18 0 0 0 0 0 0 0 0 0 0 8 8 8 8 8 8 8 8 8 8 8 8 7 7 7 7 7 7 7 7 7 8 7. 7. 7 7 7 7 7 8 8 8 8 8 8 8 8..... 7 7 7 7 8 8 8. 8. 8. 8. 8 8 1... 7 7. 8. 8. 8 8 8 8 8 1 1 1 1 1 1 1 1.......... 7. 7. 1. 1.......... 7 7 7 7 7 7 7 10 10 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 8. 8. 17. 17. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1...... 0 0 0 0 0 0 0 0 0 8 8 8 8 8 10 10 11. 11. 11. 11. 11. 11. 11. 11. 11. 11. 1 1 1 1 1 1 1 1 1 1 1 1 18 18 18. 18. 18. 17. 17. 0 0 0 0 0 0 0 0 0 8 8 8 8 8. 8. 8. 8. 8. 8. 10 11. 11. 1 1 11. 11.8 1. 1.8 1.8 1.8 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1 1 17 17. 7. 8 7. 7. 7. 7. 10. 10. 10. 11 10. 10.8 1 11. 11. 11. 1. 1. 1. 1. 1. 1 1.7 1 1 1 1.8 1.8 1.8 1.8 7. 7. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 10 10 10 10 10 10. 1 1 1 1 1 1 1. 1. 1. 1 1 1 1 1 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 17 17 17 17 17 17. 17. 17. 17. 18. 18. 1 1 1 1 1. 1. 1........... 1. 1. 1. 1. 1. 1. 1. 1........... M M M M M M M M M M M M M M M M M M M10 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1................... d 1 d d d d 7 d 8 d 11 d 1 d s l 1 l l l l l l 7 l 8 l l 1 l 1 l 10 l 1 l 8 l 1 l 1 m x R.. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7.. 11 11 11 11 11 11 11. 11. 11. 1 1 1 1 1 Dimensions in millimeter Dual Seals

Split Seals SPS Balanced Bidirectional Builtin flushing connections External pressurization Fully split single seal, x segments, preassembled Installation and wear control Semicartridge Stationary springs 1 7 1 11 Dw d1 d h8 l 1 1 8 10 1 1 17 l l l1 Item 1 Seal face,, 7 ORing Spring Seat Driver 8 Thrust ring Clamp collar Housing 11 Assembly fixture Gasket 1 Head screw plug 1 Mounting plate 1 Set screw 17 Socket head screw Typical Industrial Applications Agitators Chemical Industry Centrifugal pumps Conveying pulp with stock pumps Cooling water pumps for energy generation Conveying timber to refiners with pumping screws Circulation of pulpandwater mixtures in storage vessels Displacement pumps Process industry Petrochemical Industry Power Plant Technology Pulp and paper industry Pump stations for waste water treatment Performance Capabilities Shaft diameter: d1 = Upto...10 mm (Upto....000 ) Pressure: p1 = 10 bar (1 PSI) Temperature: t = 0... +10 C ( 0... + 00 F), above 80 C (17 F) flush is recommended Sliding velocity: Vg = 10 m/s ( ft/s) Axial movement: ± 1. mm (1/1") Radial movement: ± 0.8 mm (1/") Materials Seal face: Carbon graphite antimony impregnated (A), Silicon carbide (Q) Seat: Silicon carbide (Q) Secondary seals: FKM (V), EPDM (E), NBR(P) Springs: CrNiMo steel (G) Metal parts: CrNiMo steel (G) Design Variations º da 10 1, 1 1 Technical Features Dependable operation: mechanical decoupling of clamping ring (torque transmission) avoids distortion of the seat Greater flexibility during installation: no modification necessary because the seal is located outside of the stuffing box High tolerance to shaft deflections ensured by stationary design and elastic seat mounting (gasket) Low leakage: elimination of secondary seals eliminates leakage paths between split components Shaft protection: uniform torque transmission via clamping ring prevents damage caused by set screws Springs which are protected from the product prevent clogging s M1 l 0º s a

Split Seals Dimensional Data Dimensions in inch d w d 1 d d a a s l 1 l l l l X.000..07.. 0.1.80.0 1.181 1.77 0.118 /8 NPT.1.110..787. 0.1.80.0 1.1 1.77 0.118 /8 NPT.7.0.7.8.1 0.8.0.1 1.181 1.811 0.118 /8 NPT.00..11.181.7 0.8.0.1 1.181 1.811 0.118 /8 NPT.70.88... 0.787.0.1 1.181 1.811 0.118 /8 NPT.000.1.80 7..000 0.787..80 1. 1.80 0.118 /8 NPT.0.1.17 7.0.1 0.787..80 1.0 1.80 0.118 /8 NPT.00.7.1 7..70 0.8.8.77 1.0 1.88 0.118 1/ NPT.70.1.0 8.110.87 0.8.8.77 1.0 1.88 0.118 1/ NPT.000.17.0 8.0.10 0.8.8.77 1.0 1.88 0.118 1/ NPT.0.1..0. 0.8.8.77 1.0 1.88 0.118 1/ NPT.00.8.80. 7.087 0.8.8.77 1.0 1.88 0.118 1/ NPT.70.8.80. 7.087 0.8.8.77 1.0 1.88 0.118 1/ NPT.000.78 7.8 10.1 7.80 1.0.. 1.71.1 0.17 1/ NPT.00.80 7.87 11. 8.071 1.0.. 1.71.1 0.17 1/ NPT.000 7.0 8. 1.1 8.1 1.0.. 1.71.1 0.17 1/ NPT Dimensions in millimeter dw d 1 d d a a s l 1 l l l l X 0 0 70 80 0 100 110 10 1 10 10 7 8 8 110 11 11 1 1 1 17 188 8 101 11 1 10 10 1 17 18 00 1 18 1 17 11 0 1 0 0 8 0 08 88 10 118 1 1 1 170 180 10 0 0 1 17, 0 0 Note: Additional technical & dimensional information will be provided on request. 7. 7. 7. 7. 8. 8. 8. 1 70. 70. 70. 70. 87. 87. 87. 0 0 0 1 1. 1. 1. 1.... 7 0. 0. 0. 0... /8 NPT /8 NPT /8 NPT /8 NPT 1/ NPT 1/ NPT 1/ NPT 1/ NPT 1/ NPT 1/ NPT 1/ NPT 1

Split Seals SSCS01 Balanced For plain shafts Independent of direction of rotation Multiple springs rotating Semi split single seal l Technical Features Economical: no complete dismantling of pump necessary Reduction of downtimes and installation times Robust seal design Split seat can be used on both sides Springs are protected from the product l 0,1 Typical Industrial Applications Chest agitators Cooling water pumps Defibrators Gears Power plant technology Pulp and paper industry Sea water desalination Shipbuilding Stern tubes Water and waste water technology Water turbines 1º f 1º R l1 H7 l8 1. d +0,1 1.1 d 1. 1. 1.7 d 1. 1. R d1 h8 d mx Performance Capabilities Sizes: d1 = Upto 10 mm (Upto 1.0 ) Pressure: p1 = bar ( PSI) Temperature: t1 = 10 C (0 F) Speed = 0 m/s ( ft/s) Permissible axial movement: ±.0 mm Materials Seal face: Silicon carbide (Q1) Seat: Silicon carbide (Q1, Q), Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B) Secondary seals: FKM (V), EPDM (E), NBR (P) Metal parts: CrNiMo steel (G) Torque Transmissions Item 1.1 1. 1. 1. 1. 1. 1.7 Seal face1) Driver collar ORing1) ORing1) Spring Set screw ORing1) Stationary seat1) ORing1) 1) For disassembly of unsplit seal faces, seats and ORing should be broken or cut. 1 d1 10 mm Set screws with cone points x offset by 0

Design Variations l l11 Split Seals SSCS11 Dimensions, items and descriptions as SSCS01. Item 1. driver collar is modified for securing on stepped shafts. Unsplit as original equipment: Designation SSCS10. x 10O offset d 1. d11 h d11 h8 Dimensional Data Dimensions in millimeter d 1 d 11 d d d d d l 1 l 11 l l l l 8 R f m x 0 0 70 7 80 8 0 100 10 110 11 10 1 10 1 10 1 10 1 10 1 170 17 180 18 10 1 00 0 10 0 0 0 0 0 70 80 0 00 10 0 0 0 70 7 80 8 0 100 10 110 11 10 1 10 1 10 1 10 1 10 1 170 17 180 18 10 1 00 10 0 0 0 0 0 70 80 0 00 0 70 7 80 8 0 100 10 110 11 10 1 10 1 10 1 10 1 10 1 170 17 180 18 1 17 0 07 1 17 7 8 0 1 100 10 110 11 10 1 10 1 10 1 10 1 10 1 170 17 180 18 10 1 00 0 10 1 0 0 0 0 70 80 0 00 10 0 0 0 0 0 80. 8. 0.. 100. 10. 110. 11. 10. 1. 10. 1. 10. 1. 10. 1. 10. 1. 170. 17. 180. 18. 10. 1. 00. 0. 1. 17.. 7.. 7.... 7. 8.. 0. 1.... 8... 10. 10. 11. 11. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 17. 17. 18. 18. 1. 1. 0. 0. 1......... 7. 8.. 07. 17. 7. 7. 7. 7. 0 70 7 80 8 0 100 10 110 11 10 1 10 1 10 1 10 1 10 1 170 17 180 18 10 1 00 0 10 1 7 8 0 1.......................... 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 7. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 8. 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 7 7 7 7 77 77 77 77 77 77 77 77 77 77 77 77 77 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8................. 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0........................................... 8 8 8 8 8 8 8 8 8 8 8 8 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 M10 d1 > 10 on request inch size available from size.000 to 1.0 Note: Additional technical & dimensional information will be provided on request. 17

Engineered Seals 1 1 18 1 1 SPPS 7 Balanced Independent of direction of rotation No dynamic ORing on shaft Seal faces have a large clearance to the shaft Semi cartridge unit Shrinkfitted seal faces Single + Plan 11 flush Static springs Technical Features No damage of the shaft by dynamically loaded ORing Seal faces protected by strong steel parts and a large radial clearance Static springs reduces influence of misalignment Typical Industrial Applications Pulp and paper industry Chemical industry All clean none abrasive media Performance Capabilities Temperature: t = 0 C... +10 C ( F... +8 F) Pressure: p1... bar ( PSI) Sliding velocity: vg... 0 m/s ( ft/s) Materials Seal face: Silicon carbide (Q1), Carbon (A) Secondary seals: FKM (V), EPDM (E), FFKM (K) Metal parts: CrNiMo steel (G), Grade A (T), SMO (U) Suitable for following equipments Ahlstar UPAMS1 pumps Sulzer A, APP/APT pumps Sulzer SL mixers Metso conical refiners Stock pumps Item 1,, 1,,, 1 1 18 7 Seal face ORing Spring Sleeve Housing Pin Locking fixture 18

Balanced Double pressure Dual seal Independent of direction of rotation Internal barrier fluid circulation No dynamic ORing on shaft Shrinkfitted seal faces Seal faces have a large clearance to the shaft Semi cartridge unit Static springs on both sides Technical Features Can be used with pressurized buffer fluid or with quench No damage of the shaft by dynamically loaded ORings Seal faces protected by strong steel parts and a large radial clearance Static springs on both face sides reduces influence of misalignment The dual seal can also be used as single seal by removing the atmospheric seal parts Typical Industrial Applications Pulp and paper industry Chemical industry Clean, abrasive or corrosive liquids Stocks of various kind Applications where crystallization is a problem Performance Capabilities Temperature: t = 0 C... +10 C ( F... +8 F) (180 C ( F) with FFKM elastomers) Pressure: p1... bar ( PSI), p Sliding velocity: vg... 0 m/s ( ft/s) Stock content: SPPD 1 1 18 1 1 7 1 1 1 18 1 0 Engineered Seals Nonflow operation: Temperature: t = + C... +100 C (+1 F... +1 F) Pressure: p1 max. 10 bar (1 PSI), p > p1 Sliding velocity: vg... 0m/s ( ft/s) Materials Seal face: Silicon carbide (Q1), Carbon (A) Secondary seals: FKM (V), EPDM (E), FFKM (K) Metal parts: CrNiMo steel (G), Grade A (T), SMO (U) Suitable for following equipments Ahlstar UPAMS1 pumps Sulzer A, APP/APT pumps Sulzer SL mixers Metso conical refiners Stock pumps Item 1 1 1 18 7, 1, 1,,,, Seal face Seat Sleeve Housing Pin Locking fixture ORing Plug 1

Engineered Seals SBR l SBR100 l1 1.1 7 Item Part no. 1.1 7 Seal face 1. 0 Sleeve 1.1 ORing 7 Thrust ring 77 Spring 7 Seat (G11) 1. ORing 7 1. ORing 8 1 Housing 1. 8 l d1h d H8 d H8 d11 d d 0,1 d10 h8 d1 d8 l SBR110 Balanced Dual seal as cartridge unit also available Independent of direction of rotation Multiple springs stationary Seat arranged directly behind the impeller Seat rotating Single seal Spring protection sleeve Variant as cartridge with/without guide sleeve for application with/without quench Technical Features Accommodates shaft deflections due to stationary design Especially for application for medias containing solids No damage of the shaft by dynamically loaded ORing Operation under vacuum without seat locking possible Pumping screw for increased circulation available Springs are protected from product and leakage Typical Industrial Applications Water and waste water technology Dirty, abrasive and solids containing media Dredger pumps Mining industry Oil and gas industry Oil sand extraction plants (FGD) Power plant technology Pulp and paper industry Sewage water pumps Suspension pumps of fluegas desulphurization Performance Capabilities Sizes: dn = Upto 70 mm (Upto 10. ) Pressure: p1* = 1 bar (0 PSI) Temperature: t = 0 C...+10 C ( F...+0 F) Speed = 10 m/s ( ft/s) DIN 0 Standards EN 17 Direction of installation: from the impeller side SBR100 from the bearing side BR110 Materials Seal face: Silicon carbide (Q1, Q) Seat: Silicon carbide (Q1, Q) Notes Direction of installation: From the impeller side: SBR100 From the bearing side: SBR110 Stationary Seats l l7 +0, l 0 º l d d G (dn... 0 mm) 10 H11 d8 k d H11 R1 G (dn... 180 mm)

d1 dn d1h 1 d1 dn d1h 1 Design Variations d d1 1.1 1. 7 d11 d1 l1 7 l10 l1 l1 l1 1.1 8 dn d1h max Engineered Seals l11 SBR00 Cartridgetype single seal with guide sleeve (Item no. ) for use with quench. Insert (Item no. 1) either metal or silicon carbide. SBR00 Cartridgetype single seal. Insert (Item no. 1) either metal or silicon carbide. Optional without maintenance rinsing. SBRKSD Double seal in cartridge design for operation in barrier or buffer pressure (does not open if barrier pressure fails), available alternatively with a pumping screw for a higher rate of circulation. Torque transmission e.g. by shrink disk. SBRZ100 Single seal with cylindrical spring and type G7 seat. For installation in covers with installation dimensions according to EN 17 B or U. Installation length l11 corresponds to max. l1k. Intermediate sizes on request. Dimensional Data Dimensions in millimeter d 1 0 8 8 8 0 70 7 80 0 100 110 10 10 10 10 180 10 00 10 0 0 0 d 1h 8 8 8 8 70 7 80 8 0 100 110 10 10 10 10 170 10 00 10 0 0 0 0 d N 1 1 1 71 7 80 8 0 100 110 10 10 10 10 10 180 00 10 0 0 0 0 70 d 7.1.1 7.1.1 7.1 7.1 77.1 8.1 87.1.1 7.1 10.1 107.1 11.1 1.1 1.1 1.1 1.1 1. 17. 1. 1. 1. 1. 1. 1. 71. 1. d 70 7 80 8 0 101 10 111 11 11 1 11 17 17 17 177 188 18 0 0 7 8 1 d 70 7 80 8 0 100 10 110 11 10 1 10 1 1 1 17 18 1 0 0 70 80 0 00 10 0 d 1 1 7 81 8 1 101 107 107 117 1 1 1 1 17 187 d 7 7 77 81 88 100 10 110 11 1. 1. 1. 1. 1. 18. 178. 188. 1. d 7 70 7 80 8 0 7 10 110 11 10 1 1. 1. 18. 18. 18. 180. 10. 00.. d 8 d 0 0 0 70 7 7 8 8 10 11 1 1 1 1 1 18 0 18 8 8 8 8 78 d 10 d 11 l l 1 l l l l l l 7 l +0.min 8 8 8 8 7 78 8 88 8 10 117 17 1 1 1 1 18 0 0 0 0 0 0 80 7 80 8 0 100 10 110 11 10 1 10 1 10 1 17 18 1 0 1 8 80 0 00 10 0 0 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8 8 8 8 8 11 11 11 11 11 11 7 7 7 7 7 7 7 7 8 8 8 8 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 8. 8. 8. 8. 8. 8. 17 17 17 17 17 17 17 17 17 17 17 17 17 17 1 1 1 1 1 1 1 1.7.7.7.7.7.7 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 10. 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 7 7 7 7 7 7 7 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 8.. 10. 10. 11 11. 11. 11. 1 1 1 0 0 0 0 0 8 k t t 1 1. 1.. 71. 7 8 88 8 10 108 11. 11. 1. 1 1 10 170 180 1............. 7 7 7 7 7 7 7 7 7 Dimensions in millimeter SBRZ100 Dimensional Data d N d 1 h d 1 d 11 d 1 d 1 d 1 l 10 l 11 l 1 l 1 l 1 l 1 77 100 0 0 7 0 0 7 7 70 7 78 1 10 1 77 88 110 Dimensions for shaft diameters from 0 mm on request. inch size available from size 0.70 to 10. Note: Additional technical & dimensional information will be provided on request. 8 1 7 8 7 10 7.7 7.7.8 7. 8...1 8 7 1 1 1. 1. 17. 1.7.7.. 7 1... 7 7 11

Engineered Seals SBRN Balanced Dual seals in tandem as well as backtoback arrangements also available Independent of direction of rotation Single seal Stationary springs f l l1k ±1 Technical Features Adjusts to shaft movements because of the stationary design Balanced seal even with plain shafts No damage of the shaft by a dynamically loaded ORing Operation in vacuum without additional seat locking possible Safe operation Small installation sizes Spring unit isolated from the product so no sticking and clogging of the springs Suitable for pressure reversals Suitable for solid containing and abrasive media mx 1.1 1. 1. d10 d d1 h 1. 1. d H11 H8 d7 0º l l d8 Item 1.1 1. 1. 1. 1. Part no. 7 Seal face 1.1 ORing 8 Retainer 77 Spring 1. ORing 7 Seat 1. ORing 8 Drive collar 1. ORing 0 Set screw DIN 0 1

Typical Industrial Applications Chemical industry Dirty, abrasive and solid containing media Fugitive hydrocarbons Refining technology Sticky and stringy media Water and waste water technology Chemical standard pumps Sewage pumps Performance Capabilities Sizes: d = Upto 100 mm (Upto.000 ) Pressure: p1*) = bar ( PSI) Temperature: t = 0 C.. +0 C (0 F.. 8 F) Speed = 0 m/s ( ft/s) Permissible axial movement: ± 1.0 mm Materials Seal face: Carbon graphite resin impregnated (B), Silicon carbide (Q1) Seat: Silicon carbide (Q1) Secondary seals: FKM (V), NBR (P), FFKM (K), PTFE (T) Springs: Hastelloy C (M) Metal parts: CrNiMo steel (G) EN 17 Standards Engineered Seals Dimensions in millimeter Dimensional Data d 1 d d d 7 d 8 d 10 I 1k I I I f m x 18 0 8 0 8 0 8 0 8 0 8 70 7 80 8 0 100 7 0 8 8 0 8 1 70 7 7 78 80 8 8 0 7 10 110 11 10 1 7 1 7 1 7 70 7 7 77 81 8 88 100 10 110 11 inch size available from size 0.70 to.000 Note: Additional technical & dimensional information will be provided on request. 7 0 8 8 0 8 1 70 7 7 78 80 8 8 0 7 10 110 11 10 1.7.7 8.7 0.7 1.7.7.7.7.7 1.7 7.7.7.7.7 7.7 71.7 7.7 7.7 80. 8. 8. 87... 100. 108. 11. 118. 1. 18. 7. 7. 7. 0.0 0.0......0.0.0.0.0 7. 7. 7...... 0.0 0.0 0.0 0.0.0.0.0 1. 1. 1. 0. 0. 1. 1. 1. 1. 1..0.0.0.0.0.0.0.0 8.0 8.0 8.0 8.0 8.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0...........0.0.0.0.0 7 7 7 7 7 7 7 7.0.0.0........0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 10.0 10.0 10.0 8 8 8 8 8 8 8 1

Engineered Seals XBPV/XBFV Balanced Cartridge design Dependent of direction of rotation Integrated pumping device Multiple springs Single seal Stationary spring loaded unit Shrinkfitted seal face Technical Features Deformationoptimized seal for highest pressure levels Economical due to standardized inner components High flexibility due to adaptation of the connection parts to the pump seal chamber Insensitive to shaft deflections due to stationary design Optimum heat dissipation due to integrated pumping device and optimized seat design Only small number of components Preassembled unit for quick and easy installation 1.1.1 1.1. 1. 1.1. Typical Industrial Applications Amines Injection pumps Caustic soda Multiphase pumps Chemical industry Oil and gas Crude oil industry Crystallizing media Process water Crude oil feed Refining pumps technology Hot water Sour water Standards API 8 / ISO 10 Performance Capabilities Sizes: d1* = Upto 0 mm (Upto 10.000 ) Pressure: p1 = 10 bar (,17 PSI) Temperature: t = 00 C (7 F) Speed = 0 m/s (17 ft/s) Permissible axial movement: ± mm Item 1.1.1 Seal face pressurestabilized 1.1. Spring 1.1. Backup ring 1. Seat Seat housing with pumping screw (F) or pumping ring (P) 1 Cover Assembly fixture Materials Seal face: SiCCSi silicon impregnated carbon (Q), Carbon graphite antimony impregnated (A) Seat: Silicon carbide (Q) Secondary seals: FKM (V), EPDM (E), FFKM (K) Springs: Hastelloy C (M) Metal parts: CrNiMo steel (G), Duplex (G1), Super Duplex (G), Titanium (T), Hastelloy C (M) Design Variations XBFV Same design as XBPV but with pumping screw

XBF(V)D/XBP(V)D Balanced Cartridge design Dual seal Integrated pumping device Multiple springs arrangement Shrinkfitted seal face Single robust stationary seat Stationary spring loaded unit Technical Features Accommodates shaft deflections due to stationary design Cost effective due to standardized inner components High flexibility due to adaptation of the connection parts to the pump seal chamber Optimum heat dissipation due to integrated pumping device and optimized seat design Preassembled unit for quick and easy installation Reliable operation due to single robust seat with bandage Suitable for high sliding velocities and medium pressures Suitable for use in compliance with API 8, type ES Versatile application for OEM or retrofits of boiler feed water pumps Version with loosefitted seal face available, for extreme applications Typical Industrial Applications Chemical industry Crude oil Crude oil feed pumps Injection pumps Multiphase pumps Oil and gas industry Process water Refining technology Volatile and nonvolatile hydrocarbons Standards API 8 / ISO 10 Performance Capabilities Sizes: d1* = Upto 0 mm (Upto 10.000 ) Pressure: p = 10 bar (,17 PSI) Temperature: t = 00 C ( F) Speed = 0 m/s (17 ft/s) Materials Seal face: SiCCSi, silicon impregnated carbon (Q), Carbon graphite antimony impregnated (A) Seat: Silicon carbide (Q) Secondary seals: FKM (V), EPDM (E), FFKM (K) Springs: Hastelloy C (M) Metal parts: CrNiMo steel (G), Duplex (G1), Super Duplex (G), Pure Titanium (T), Hastelloy C (M) Item 1.1.1 1.1. 1. 8 10 1 1 1 1 Seal face Spring Seat Shaft sleeve Clamping sleeve Housing Cover Pumping sleeve Assembly fixture Shrink disk 8 10 1. Design Variations 1.1.1 XBF(V)1D / XBP(V)1D Same design as XBF(V)D / XBP(V)D but with loosely inserted seal face for extreme applications. Pressure: p1 = 00 bar (00 PSI) 1.1. Engineered Seals 1

Engineered Seals XBF/XBP Balanced Cartridge design Dependent of direction of rotation Integrated pumping device Multiple springs Shrinkfitted seal face Single seal Stationary spring loaded unit Technical Features Suitable for high sliding velocities and medium pressures Accommodates shaft deflections due to stationary design Cost effective due to standardized inner components High flexibility due to adaptation of the connection parts to the pump seal chamber Optimum heat dissipation due to integrated pumping device and optimized seat design Preassembled unit for quick and easy installation Versatile application for OEM or retrofits of boiler feed water pumps Typical Industrial Applications Boiler feed water pumps Power plant technology 1 1.1.1 1.1. 1. 8 Performance Capabilities Sizes: d1* = Upto 0 mm (Upto 10.000 ) Pressure: p1 = 0 bar (7 PSI) Temperature: t = 00 C (7 F) Speed = 0 m/s (17 ft/s) Permissible axial movement: ± mm Materials Seal face: Silicon carbide (Q), Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B) Seat: Silicon carbide Secondary seals: EPDM (E), FFKM (K) Springs: CrNiMo steel (G) Metal parts: CrNiMo steel (G) Design Variations XBF Single Mechanical Seal with integrated jacket cooling, for boiler feed pumps 1 Item 1.1.1 Seal face 1.1. Spring 1. Seat Shaft sleeve Cover 8 Pumping screw with flow guide Assembly fixture 1 Shrink disk

Engineered Seals SB100/SB800 Balanced Independent of direction of rotation Single seal Stationary multiple springs Technical Features Compact readytoinstall unit High pressure capability No damage of the shaft by dynamically loaded ORing Stationary design allows shaft misalignments Suitable for solids in the medium Very short axial installation length Typical Industrial Applications d H7 d ±0,1 1. 1. d min d +0, 1.1 1. d1 Performance Capabilities Sizes: d1 = Upto 100 mm (Upto.000 ) Pressure: p1 = bar ( PSI) Temperature: t = 0... +180 C (0 F F) Speed = 0 m/s (1 ft/s) d All seal chambers with a very short axial installation length Bearing seal Lube oils Process industry Roller seal Item Part no. 1.1 1. Seal face 7 Seal face housing 8 Drive collar 1. Materials Seal face: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B) 8 7 ORing 1. 77 Spring 7 Rotating seat*) 1. ORing DIN 0 l1 *) The seat design is chosen according to the specific requirements and conditions of operation. Design Variations l1 d 1. SB800 Dimensions, items and decription as SB100. Drive collars and housings for item 1. are made of deepdrawn stainless steel sheet. Dimensional Data Dimensions in millimeter d1 d d d d d d 1 1 17. 1 18 1. 7 0 1 8 7. 0 0. 8 7.8 1 8.8 7 0 1 8 7.8 0 0.8 8.8 1 7 8. 0 7 0 1 8 7. 0 7. 8 7. 1 7 7 8 80. 7 0 1 80 8. 7 8 0. 8 7 8. 1 7 77 8 0.7 8 0 1 0 8.7 8 7.7 71 7 87 8 7.7 7 100 70 70 71 78.7 7 100 7 7 7 8.7 81 108 77 100 80 81 88.7 8 11 8 10 8 8.7 1 118 87 110 0 1. 1 11 10. 101 18 7 10 100 101 10. 10 1 10 1 inch size available from size 0.70 to.000 Note: Additional technical & dimensional information will be provided on request. l 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 1 1 1 1 1 1 1 1 1 l1 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1. 1. 1. 1. 1. 1. 1. 1. 1. l 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 18 18 18 18 18 18 18 18 18 17

Engineered Seals BSPHK l1k l7 +0. l d1 1) R1 ), º 10 1. ) 1. H8 ) d7 1.1 h d d 1. 1. 1. H11 ) l d l mx f Item Part no. 1.1 7 Sliding face 1. 1.1 ORing 1. 7 Thrust ring 1. 8 Drive collar 1. 77 Spring 1. 0 Set screw 7.1 Sea 1. ORing DIN 0 18 Balanced Does not open in the event of buffer pressure failure, self closing at pressure reversal For stepped shafts Gaslubricated Rotating spring Single or double seal available Standard version with Ugrooves, Vgrooves optional (dependent of direction of rotation) Technical Features Applicable as containment seal acc. to API 8 Contactfree operation, no friction No differential pressure required with hard/soft material combination Typical Industrial Applications Chemical industry Refining technology Gases and liquids (single seals only gas) Gases and liquids which must not get into the atmosphere (dual seal) Gases not harmful to the environment (single seal) Fans Small steam turbines Blowers Roots compressors Pumps Performance Capabilities Shaft diameter: d1 = 8... 1 mm (1.10"....") Pressure: p1 = bar ( PSI) Temperature: t* = 0 C... +170 C ( F... +8 F) Sliding velocity: vg =... m/s (1... 8 ft/s) * Depending on resistance of ORings Materials Seal face: Carbon graphite antimony impregnated (A), Silicon carbide (Q), alternatively: Carbon graphite resin impregnated (B), Silicon carbide (Q1) Seat: Silicon carbide (Q1, Q), Silicon carbide (Q1, Q) with seal face in Q1 resp. Q Metal parts: CrNiMo steel (G) Standards EN 17 API 8 / ISO 10 1) d1 > 10: mm x 0 ) d1 > 10: 0 ) d1 > 10: +0.1 ) d1 > 10: H7 ) x 10

l 1 GBI 7 Design Variations F CSV 7 GBI 7 Engineered Seals l CSD 7 BSPHKD Double seal backtoback, buffered with gas, according to API 8 configuration NCBB, Plan 7. Items, descriptions and unspecified dimensions as for BSPHK. Pressure: p1 =... bar (1 PSI), p =... bar ( PSI) (over the whole nominal diameter range, higher values on request). Differential pressure Δp = min. bar ( PSI) Other operating limits as BSPHK. BSPH Tandem arrangement acc. to API 8 rd Edition. Configuration: CWCS, Plan 7, 7, 7. For media with a gaseous leakage. P70VN on the product side. In case of a failure, the BSPH on the atmosphere side works as a liquid seal. Dimensional Data Dimensions in millimeter d 1 d d d d 7 l 1K l1' l l' l l l 7 f m x 8* 0* * * * 8* 0* * 8 8 0 8 0 0 7 70 7.0.0.0.0.0.0 1.0.0.0.0 8.0 8.0 0.0.0 8.0 1.0 0.0 0.0 0.0 0.0 0.0... 8 8 8 8 8 0 0 0 0 0..... 7. 7. 7..0.0.0.0.0.0.0.0 M M M M M M M M * 0 7.0.0. 7..0 M 8* 7.0.0. 7..0 M 0* 77.0 70.0 7. 10.0. M * 8 8.0 7.0 7. 10.0. M * 0 8 7.0 7.0 7. 10.0. M 8* 8 70.0 78.0. 11.0. 7 0* 1 7.0 80.0. 11.0. 7 * 8 7.0 8.0. 11.0. 7 * 70 7 77.0 8.0. 11.0. 7 70* 7 10 8.0.0 70.0 1 8.0. 7 7 7* 80 10 88.0 7.0 70.0 1 8.0. 7 7 80* 8 11.0 10.0 70.0 1 8.0.0 7 7 8* 0 11 100.0 110.0 7.0 1 8.0.0 7 7 0* 1 10.0 11.0 7.0 1 8.0.0 7 7 * 100 1 110.0 10.0 7.0 1 8.0.0 7 7 100* 10 1 11.0 1.0 7.0 1 8.0.0 7 7 10* 110* 11* 10* 1* 11 10 1 10 1 1 18 1 18 17 1. 18. 1. 18. 1. 1. 10. 18. 10. 1. 7.0 7.0 7.0 7.0 7.0 1 1 1 1 1 8.0 8.0 8.0 8.0 8.0.0.0.0.0.0 10 10 10 10 10 7 7 7 7 7 inch size available from size 1.1" to.000" Note: Additional technical & dimensional information will be provided on request. 1

Mixers Seals BSAZ Balanced Double seal For top entry drives Gaslubricated Independent of direction of rotation Technical Features Centrally arranged rotating seat Contactfree running No friction on the seal faces, no heat generated at the seal or in the medium Torque transmission by clamping ring for large axial movements 1) d7 h l l G C 1 11 x M d 1, º 7 17 0 1 d0 a d e8 k d1 Seal face(diamond Coated), atmosphere side Seal face (Q1), product side l1 A Item,7 11 Seat (Q1) 8, d1)h8 17 Flange Clamping ring ORing d 1 ±0.1 7 l1 x M d8 Flange connection acc. to DIN 817 T for nominal diameters 0... 100. Flange connection acc. to DIN 817 T for nominal diameters 1... 11. d H8 ra k1 d1 Typical Industrial Applications Agitators Chemical industry Environmental harmful media with double seals Food and beverage industry Gases and liquids Media which require high purity Pharmaceutical industry Performance Capabilities Shaft diameter: d = 0... 0 mm (1."... 8.7") Preassure p1 = vacuum... bar (87 PSI), Δp = min. bar ( PSI), p = bar (11 PSI) Temperature: t1 = 0 ºC... +10 ºC ( ªF... +0 ºF), with cooling flange 0 ºC (8 ºF) Sliding velocity: vg = 0... 10 m/s (0... ft/s) Standards DIN 81 T (for steel vessels) DIN 811 (flange connection for steel vessels) DIN 81 (shaft end for steel vessel) DIN 81 T (for glasslined vessels) DIN 817 T (flange connection for glasslined vessels) Notes Options: Cooling or heating flange Flush Polymerization barrier Installation, Details, Options F, G Torque Transmissions Supply Connections A C E F S G Shrink disk 10 Clamping ring with pin Clamping ring Barrier gas IN Leakage Cooling IN Cooling OUT Flush Grease Designation and positions of supply connections, pulloff and jacket threads acc. to DIN 818 T A C M1 S M E, G

ls E F l D E F Installation, Details, Options D D Mixers Seals Option Cooling flange, can be used alternatively as a heating flange (tmax. = 0 C ( F). Option Leakage drain, can be used alternatively as a flush or as a heating flange. Option Leakage drain, can be used alternatively as a flush Option Polymerization barrier, can be used alternatively as a leakage drain or a flush. Design Variations BSAZ18K(L)D Double seal (with integrated bearing) for steel vessels to DIN 81,connection flange to DIN 811 and shaft ends to DIN 81. BSAZ1K(L)D Double seal (with integrated bearing) for glasslined vessels to DIN 81, connection flange to DIN 817 and shaft ends to DIN 81. A G C GSAZ18 Dimensions in millimeter Dimensional Data d 1) d7 1) d 1 n x d d d 0 k L 1 L Lw 1) l 1 l l A M 1 M A, B 0 8 17 x18 110 0 1 81 17 1 1 8 1 M1 M1 G/8 0 8 0 8x18 17 1 10 8. 10. 18 17 8 1 M1 M1 G/8 0 8 0 8x18 17 1 10 78. 18 18 18 8 17 M1 M1 G/8 80 78 7 8x 0 1 0. 1 18 0 0 0 M1 M0 G1/ 100 8 0 8x 10 70 1. 178 0. 8 M1 M0 G1/ 1 10 0 8x 0 1 1. 0 0 0 8 M0 M0 G1/ 10 1 1x 1 0 0 7 18. 08 0 8 1 8 M0 M0 G1/ 10 10 1x 1 0 7 17. 1 81 1 0 M0 M0 G1/ 180 170 1x 10 00 M M0 G1/ 00 10 1x 10 00 M M0 G1/ 0 10 0 1x 0 0 M M0 G1/ 1) Shaft diameters d and d 7 to DIN 81 GSAZ1 Dimensions in millimeter d 1) d 7 1) Nominal size Flange size ) d 1 nxd d nxd d d 7 k 1 k l 1 l l 1 l I l l M 1 M A 0 8 0 E1 17 x18 110 10 1 1 18 8 0 0 M1 M1 G/8 0 8 0 E00 0 8x18 17 18 10 17 1 0 8 0 0 M1 M1 G/8 0 8 0 E0 7 8x 0 188 0 18 0 8 0 0 M1 M0 G/8 80 78 80 E00 0 8x 1 70 170 0 0 0 0 M1 M0 G1/ 100 8 100 E00 1x 1 8 0 177 0 0 0 0 M1 M0 G1/ 100 8 100 E00 1x 1 8 0 177 0 0 0 0 M1 M0 G1/ 1 10 1 E700 0 x 1x 0 0 0 0 08 0 7 0 0 80 M0 M0 G1/ 10 1 10 E700 0 x 1x 0 0 0 0 8 0 7 0 0 80 M0 M0 G1/ 10 10 10 E700 0 x 1x 0 0 0 0 8 8 0 77 0 0 8 M0 M0 G1/ 10 10 10 E00 0 x 1x 0 0 0 0 8 8 0 77 0 0 8 M0 M0 G1/ 10 10 11 E01 x 7 1x 70 1 00 8 8 0 77 0 0 8 M0 M0 G1/ 1) Shaft diameters d and d 7 to DIN 81 ) Flange size to DIN 817T Note: Additional technical & dimensional information will be provided on request 11

Mixers Seals SRD Cartridge unit Double seal For top, lateral and bottom drives Independent of direction of rotation Product side seat rotating Unbalanced Technical Features CIP/SIP (Cleaning in Place, Sterilization in Place) Smooth surface with no empty spaces Variant for sterile applications available l1 l l l nxd l B xm Variant with bearing Variant UR..D 1 d d d1 dw dn d d7 d8 Variant UR..D T nxm1 l l l l7 C G l Variant with bearing A Item 1 Seal face, product side Seat, product side ORing, dynamic Seal face, atmosphere side Seat, atmosphere side ORing, dynamic Installation, Details, Options B T G G A B C G T Supply Connections Barrier fluid IN Barrier fluid OUT Drainage Grease Temperature measuring A, C 1

Typical Industrial Applications Chemical industry Kneaders Food and beverage Mills industry Mixers Pharmaceutical Pressure filters industry Reactors Dryers Materials Product side : Seal face, seat: Silicon carbide (Q1), Tungsten carbide (U) Metal parts: Cr steel (E), CrNiMo steel (G), Hastelloy (M) Atmosphere side: Seal face, seat: Silicon carbide (Q1), Carbon graphite resin impregnated (B) Metal parts: Cr steel (E), CrNiMo steel (G) Product and atmosphere side: Springs: CrNiMo steel (G), Hastelloy (M) Secondary seals: EPDM (E), FKM (V), FFKM (K), FKM, FEP wrapped (M) Other materials on request. FDA Standards Notes Options: Cooling or heating flange Temperature probe Axial expansion joint (shaft lifting) Wiper ring (shaft lifting) Performance Capabilities Sizes: dn/dw = Upto 00 (00) mm (Upto 7.87 (0.00 ) Axial offset shaft/housing: dn/dw 0... 0 mm (1.18... ): max. ±1. mm (0.0 ) dn/dw >0 mm (. ): max. ±.0 mm (0.07 ) Radial offset shaft/housing: max. ±0. mm (0.01 ) Pressure: p1 (media) = vacuum... 1 () bar (0 ( PSI)) p (buffer fluid) = max. 1 () bar ( ( PSI)) Δ p > p1 = min. bar ( PSI), max. 10 bar (1 PSI) Temperature: t1 (media) = 0 C... +00 (00) C ( F... + (7) F) Speed = 0 m/s ( ft/s) Mixers Seals Torque Transmissions Drive key Clamping set Shrink disc Clamping ring with pin Clamping ring Dimensions in millimeter Dimensional Data d N d W d 1 d d d l 1 l l l l l l 7 A,B C nxd 0 0 0 0 70 7 80 8 0 100 10 110 11 10 10 10 10 10 170 180 10 00 10 0 0 0 0 0 0 0 70 7 80 80 8 0 100 110 10 10 10 10 10 170 180 10 10 8 8 7 8.7 8 0 100 110 11 10 17 10 1 10 1 10 10 17 18 1 0 0 0 0 0 70 80 117 1 1 10 1 10 10 170 17 180 10 1 00 0 10 1 0 0 7 0 00 0 8 10 10 1 17 17 17 18 1 0 0 0 0 0 0 0 0 70 70 0 0 1 7 1 118 18 18 18 18 18 18 18 178 178 188 18 18 0 08 18 8 8 8 8 8 78 8 8 8 8 78 88 88 0 00 d > 0 on request N inch size available from size 1.1 to.000 Note: Additional technical & dimensional information will be provided on request. 1 1 1 1 1 1 1 1 1 1 1 1 7 7 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 11 17 1 10 1 1 10 10 10 10 10 10 10 10 10 10 10 10 00 00 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 7 8 87 87 0 0 10 10 10 10 10 10 10 10 10 10 110 110 10 10 10 10 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 G/8 G/8 G/8 G/8 G/8 G/8 G/8 G/8 G/8 G/8 G/8 G/8 G/8 G/8 G/8 G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/8 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8 G1/8 G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ X11 X11 X11 X11 8X11 8X11 8X11 8X11 8X11 8X11 8X1 8X1 8X1 8X1 8X1 8X1 8X1 8X1 8X1 8X1 8X18 8X18 8X18 8X18 8X18 8X18 8X18 1X18 1X18 1X18 1

Mixers Seals MSS Balanced Dryrunning For top entry drives, on request side drive possible Independent of direction of rotation Multiple springs rotating Outboard Single and double seals Technical Features Available as components or as cartridge units Connections for steel (MSS18) Glasslined (MSS1) reactors are available to DIN 818 standards or as required Suitable for pressure reversals X d 11 l Typical Industrial Applications Chemical industry Food and beverage industry Nontoxic media with single seal Pharmaceutical industry Toxic media with double seal Agitators Reactors 1 Standards FDA ATEX DIN 81 T (for steel vessels) DIN 811 (flange connection for steel vessels) DIN 81 (shaft end for steel vessels) DIN 81 T (for glasslined vessels) DIN 817 T (flange connection for glasslined vessels) DIN 81 (shaft end for glasslined vessels) d1 h d d d l s Installation, Details, Options E F D Option Cooling flange, can be used alternatively as a heating flange (tmax. = 0 C ( F). Option Leakage drain, can be used alternatively as a flush. S X Materials Seal face: Carbon graphite, FDA conform Seat: Silicon carbide Secondary seals and metal parts according to application and customer's specifications Notes Seat alternatives available on request. Options: Cooling or heating flange Flush Polymerization barrier D a1 Seal flange Item 1 Seal face with seal face housing Drive collar Flange Seat with seat housing 11 1 Clamping Option Polymerization barrier, can be used alternatively as a leakage drain or a flush. Performance Capabilities Sizes: d1 = Upto 10 mm (Upto.00 ) Pressure: p1 = vacuum... bar (87 PSI) Temperature: t1 = 0 C... +10 (0*) C ( F... 0 (8*) F Speed = 0... m/s (0... ft/s) Permissible axial movement: ± 1. mm Radial movement: ± 1. mm

Design Variations G C D A G D C Mixers Seals MSS110 The MSS110 is equipped in addition with a sleeve for trapping any abrasive particles from the seal face. Contamination of the medium in the container is thus ruled out. The sleeve can be cleaned through a flushing bore. Please note: diameters (d to d) increase to the next possible design size. Single Seal Variants MSS18 Single seal MSS18L Single seal with integrated floating bearing. MSS1 All types of the MSS18 range available for unstepped shafts (all diameters). Seal identification: MSS1... Customized design or e.g. different drives (torque transmissions) are available. MSS1 / 1 For glasslined vessels. Dimensions as S1 Double Seal Variants MSS18D Double seal MSS18LD Double seal with integrated floating bearing These seals are designed to be selfclosing on the product side, i.e. they will remain closed even with pressure variations or a pressure reversal. Operation is optionally the same as for the single version. In view of the mechanical seal on the atmosphere side it can be used as a buffer pressurized double seal. The barrier pressure should be 0. 1.0 bar (7. 1 PSI) above pressure to be sealed. Dimensions in millimeter Dimensional Data d 1(mm) d 1(inch) d d d d l l a 1(min) a (max) 8 0 8 0 8 0 0 70 7 80 8 0 100 10 110 11 1 10 10 10 1.000 1.1 1.0 1.7 1.00 1. 1.70 1.87.000.1.0.7.00..70.87.000.0.00.70.000.0.00.70.000.0.00.70.000.0 7 7 7 8 8 10 10 11 11 1 1 1 1 1 1 1 8 8 8 7 7 78 78 8 8 88 88 8 10 10 108 108 11 118 1 18 1 18 1 18 1 1 178 178 178 188 18 18 0 0 8 8 7 7 78 78 8 0 0 100 10 110 11 10 1 10 1 10 10 1 1 1 17 18 18 18 18 18 1 1 18 18 1 1 178 178 18 18 188 1 1 18 18 0 08 1 18 8 8 7 77 7 7 7 07 17 17 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1..................... 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0. 0................... 100 100 100 10 10 110 110 11 11 1 1 10 10 1 10 10 1 1 10 1 10 1 170 17 180 18 1 0 1 1 1 1 1 1 1 1 1 17 17 1 1 1 1 10 10 1 1 170 17 17 180 180 18 10 1 00 0 10 1 0 7 7 7 8 0 0 0 80 100 1 10 10 180 00 0 8 8 8 78 8 10 1 10 170 10 10 17 0 0 7 0 0 0 x18 8x18 8x18 8x 8x 8x 1x 1x 1x 1x 1x 110 17 17 0 0 1 1 0 1 1 1 10 1 0 10 10 0 1 10 10 0 70 0 0 00 00 0 87 8. 10. 10 110 1 17. 1. 17. 1. 1 1 1 18 10 0 1. 0 7.. 1 18 18 18 178 0 08 1 1) Shaft diameters d and d 7 to DIN 81 ) Shaft step to DIN 81 inch size available from size 1.00 to.00 Note: Additional technical & dimensional information will be provided on request. 1 17 17 0 0 0 0 8 8 8 0 0 0 0 1 17 18 0 8 8 8 7 81 M1 M1 M1 M1 M1 M0 M0 M0 M M M 1 s MSS1 Dimensions in millimeter d 1) d 1) 7 d 1 n x d d d 0 k L 1 L L ) w l 1 l A M 1 M 1 A, B M1 M1 M1 M0 M0 M0 M0 M0 M0 M0 M0 11 11 11 11 11 11 11 11 11 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 18 18 18 18 18 18 18 18 G/8 G/8 G/8 G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ 1

Mixers Seals l1 l A x M x M1 1 1 1 7 1 11 1 d7 h d h8 l l G C B d S1 l Cartridge unit Double seal, single seal on request For glasslined vessels, acc. to DIN 818 T For top entry drives ndependent of direction of rotation Multiple springs rotating Unbalanced Technical Features Available with or without floating bearing Double seals can be applied at higher pressure and rotating speed Readytofit and factorytested unit Suitable for standardizations Typical Industrial Applications Chemical industry Nontoxic media with single seal Pharmaceutical industry Toxic media with double seal Agitators Reactors Materials According to application and customer's specification. Performance Capabilities Sizes: d = Upto 10 mm (Upto.00 ) Pressure: p1 = vacuum... 1 bar ( PSI), p = max. 18 bar (1 PSI) Temperature: t1 = 0 C... +00 (0) C (0 F... + (8) F) Speed = 0... m/s (0... 1 ft/s) Installation, Details, Options 1 ±0.1 7 d d8 H8 1B A C M1 F, G M B D k1 d1 E, G, T Designation and positions of screwed connections, pulloff and jacket threads acc. to DIN 818 T. Item 1,7,1 1,1 11 1 Seal face, atmosphere side Seal face, product side ORing Seat, product side Seat, atmosphere side l1 0 ±0.1 7 d d 1 d8 d d Flange connections acc. to DIN 817 T for nominal diameters 1... 11. k k1 d1 0º x M 1. A B C D E F G H Supply Connections Barrier fluid resp. quench IN Barrier fluid resp. quench OUT Drainage Leakage drain G1/8" Cooling IN G/8" Cooling OUT G/8" Grease Temperature metering 1

Standards FDA DIN 81 T (for glasslined vessels) DIN 817 T (flange connection for glasslined vessels) DIN 81 (shaft end for glasslined vessels) Notes Options: Cooling or heating flange Leakage drain, flush or heating flange Leakage drain or flush Polymerization barrier, leakage drain or flush Mixers Seals Torque Transmissions Clamping set Shrink disk Clamping ring with pin Clamping ring Installation, Details, Options ls E F l D E F D D Option Cooling flange, can be used alternatively as a heating flange (tmax. = 0 C ( F)). Dimensions in millimeter Option Leakage drain, can be used alternatively as a flush or as a heating flange. Design Variations Double Seals Variants S1KD Double seal S1KLD Double seal with integrated floating bearing S1K(L)D Double seal with/without floating bearing for PN Dimensional Data Option Leakage drain, can be used alternatively as a flush Option Polymerization barrier, can be used alternatively as a leakage drain or a flush. d 1) d 1) 7 Nominal size Flange size ) d 1 nxd d nxd d d 7 [k 1 [k L 1 L l 1 l I l l M 1 M A,B 0 8 0 E1 17 X18 110 10 1 1 18 8 0 0 M1 M1 G/8 0 8 0 E00 0 8X18 17 18 10 17 1 0 8 0 0 M1 M1 G/8 0 8 0 E0 7 8X 0 188 0 18 0 0 8 0 0 M1 M0 G/8 80 78 80 E00 0 8X 1 70 170 0 0 0 0 M1 M0 G1/ 100 8 100 E00 1X 1 8 0 177 0 0 0 0 M1 M0 G1/ 100 8 100 E00 1X 1 8 0 177 0 0 0 0 M1 M0 G1/ 1 10 1 E700 0 X 1X 0 0 0 0 08 0 7 0 0 80 M0 M0 G1/ 10 1 10 E700 0 X 1X 0 0 0 0 8 0 7 0 0 80 M0 M0 G1/ 10 10 10 E700 0 X 1X 0 0 0 0 8 8 0 77 0 0 8 M0 M0 G1/ 10 10 10 E00 0 X 1X 0 0 0 0 8 8 0 77 0 0 8 M0 M0 G1/ 10 10 11 E01 X 7 1X 70 1 00 8 8 0 77 0 0 8 M0 M0 G1/ 1) Shaft diameters d and d7 to DIN 81 ) Flange size to DIN 817T inch size available from size 1.7 to.00 Note: Additional technical & dimensional information will be provided on request. 17

Mixers Seals S18 Cartridge unit For top entry drives, type S18 to DIN Independent of direction of rotation Liquidlubricated Multiple springs rotating Single or double seals Unbalanced Technical Features Available with or without floating bearing Double seals can be applied at higher pressure Readytofit and factorytested units Suitable for standardizations l x M 1, x M1 A Ø a lw 1 11 1 1) d7 h 1) d h8 G C B d l1 l Typical Industrial Applications Agitators Chemical industry Nontoxic media with single seal Pharmaceutical industry Reactors Toxic media with double seal Performance Capabilities DIN 818 T Sizes: d = Upto 0 mm (Upto 8. ) Single seals: Pressure: p1 = vacuum... bar (87 PSI), p = pressureless Temperature: t1* = 0 C... +10 (0) C (0 F... +0 (8) F) Double seals: Pressure: p1 = vacuum... 1 bar ( PSI), p = max. 18 bar (1 PSI) Temperature: t1* = 0 C... +00 (0) C (0 F... + () F) Speed = 0... m/s (0... 1 ft/s) 0º d0 d e8 k d1 8, Standards FDA DIN 81 T (for steel vessels) DIN 811 (flange connection for steel vessels) DIN 81 (shaft end for steel vessels) Notes Options: Cooling or heating flange Leakage drain, flush or heating flange Leakage drain or flush Polymerization barrier, leakage drain or flush Torque Transmissions Clamping set Shrink disk Clamping ring with pin Clamping ring 18

A C S M1 F, G M E, G, T B D Installation, Details, Options Designation and position acc. to DIN 818 T. A B C D E F G S T Supply Connections Barrier fluid resp. quench IN Barrier fluid resp. quench OUT Drainage Leakage drain G1/8" Cooling IN G/8" Cooling OUT G/8" Grease Flush Temperature metering For reasons of standardization, the supply connections of single seals are matched to those of the double seals (in deviation from DIN 818 T). Mixers Seals ls E F l D E F D D Option Cooling flange, can be used alternatively as a heating flange (tmax. = 00C (0F). Option Leakage drain, can be used alternatively as a flush or as a heating flange. Option Leakage drain, can be used alternatively as a flush. Option Polymerization barrier, can be used alternatively as a leakage drain or a flush. S1 A 1 1 1 7 1 11 1 All types of the S18 range available for unstepped shafts (all diameters). Seal identification: S1... Customized design or e.g. different drives (torque transmissions) are available. G C B Single Seals Variants S18K Single seal Design Variations S18KL Single seal with integrated floating bearing. Operation of single seals only with pressure less quench. Double Seals Variants S18KD Double seal S18KLD Double seal with integrated floating bearing. These seals are designed to be selfclosing on the product side, i.e. they will remain closed even with pressure variations or a pressure reversal. Operation is optionally the same as for the single version (pmax = bar (87 PSI) or Δpmax = bar at p1 > p). In view of the mechanical seal on the atmosphere side it can be used as a buffer pressurized double seal p1 = 1 bar ( PSI). Dimensions in millimeter 1) Shaft diameters d and d7 to DIN 81 ) Shaft step to DIN 81 inch size available from size 1.00 to 8. Note: Additional technical & dimensional information will be provided on request. Dimensional Data d 1) d 7 1) d 1 n x d d d 0 k L 1 L L w ) l 1 l A M 1 M 1 A, B 0 0 0 80 100 1 10 10 180 00 0 8 8 8 78 8 10 1 10 170 10 10 17 0 0 7 0 0 0 X18 8X18 8X18 8X 8X 8X 1X 1X 1X 1X 1X 110 17 17 0 0 1 1 0 1 1 1 10 1 0 10 10 0 1 10 10 0 70 0 0 00 00 0 87 8. 10. 10 110 1 17. 1. 17. 1. 1 1 1 18 10 0 1. 0 7.. 1 18 18 18 178 0 08 1 1 17 17 0 0 0 0 8 8 8 0 0 0 0 1 17 18 0 8 8 8 7 81 M1 M1 M1 M1 M1 M0 M0 M0 M M M M1 M1 M1 M0 M0 M0 M0 M0 M0 M0 M0 G/8 G/8 G/8 G1/ G1/ G1/ G1/ G1/ G1/ G1/ G1/ 1

Mixers Seals SBSHD Balanced Cartridge unit Double seal For top drive entries Independent of direction of rotation Liquidlubricated Multiple springs rotating On request with integrated bearing Typical Industrial Applications G C 1 1 1 B A 11 1 Dryers Chemical industry Mixers Pharmaceutical Filter industry Suitable for all media Special rotating equipment Agitators Performance Capabilities Shaft diameter: dw = 0... 00 mm (0.7"... 1.7") Pressure: p1 = vacuum... 0 bar (..., PSI)*, p = p1 + 10 % Temperature: t = 0 C... +00 (0) C (0 F... + () F) Sliding velocity: vg = 0... m/s (0... 1 ft/s) For application beyond this range, please enquire. Materials According to application and customer's specification Standards FDA Technical Features Connection dimensions to customer's requirements Designed for high pressure range Due to the hydraulic product pressure as well overlaying barrier pressure closes the seal. High reliability and long service life Readytofit and factorytested units Notes Options: Cooling or heating flange Leakage drain, flush or heating flange Leakage drain or flush Polymerization barrier, leakage drain or flush Product variants Double seal variants SBSH(V)D Double seal SBSH(V)LD Double seal with integrated floating bearing (axial thrust bearing on request). Torque Transmissions Item 1 Seal face, atmosphere side Seal face, product side,, 1, ORing 1 Clamping set 11 Seat, product side 1 Seat, atmosphere side Shrink disk Clamping ring with pin Clamping ring Installation, Details, Options A C S Supply connections A Barrier fluid IN B Barrier fluid OUT C Drainage D Leakage drain G1/8" E Cooling IN G/8" F Cooling OUT G/8" G Grease S Flush D E F B D G, E 10 E F l ls G, F Option Cooling flange, can be used alternatively as a heating flange (tmax. = 0 C ( F). Option Leakage drain, can be used alternatively as a flush or as a heating flange. D Option Leakage drain, can be used alternatively as a flush. D Option Polymerization barrier, can be used alternatively as a leakage drain or a flush.

Mixers Seals SBSHLUD Balanced Cartridge unit Double seal For bottom drive entries Independent of direction of rotation Liquidlubricated Multiple springs rotating On request with integrated bearing Technical Features Connection dimensions to customer's requirements Due to the hydraulic conditions, product pressure as well overlaying barrier pressure closes the seal Floating throttle ring on the product side High pressure seal for process orientated solutions High reliability and long service life Readytofit and factorytested units Typical Industrial Applications Chemical industry Suitable for all media Agitators 0 1 11 1 1 S 1 B Performance Capabilities Shaft diameter: dw =... 00 mm (... 1.7") Pressure: p1 = vacuum 0 bar (870 PSI) Temperature: t = 0 C... +00 C (0 F... + F) Sliding velocity: vg = 0... m/s (0... 1 ft/s) For applications beyond this range, please enquire. A C G Materials According to application and customer's specification Item Notes Options: Cooling or heating flange Leakage drain, flush or heating flange Leakage drain or flush 1 Seal face, atmosphere side Seal face, product side,, 1, ORing 1 11 Seat, product side 1 Seat, atmosphere side 0 Throttle ring Installation, Details, Options ls A C S B G Supply connections A Barrier fluid IN B Barrier fluid OUT C Drainage G Grease S Flush E F l G D E F Option Cooling flange, can be used alternatively as a heating flange (tmax. = 0 C ( F). Option Leakage drain, can be used alternatively as a flush or as a heating flange. D Option Leakage drain, can be used alternatively as a flush. D Option Polymerization barrier, can be used alternatively as a leakage drain or a flush. 11

Supply Systems & Components

Supply Systems & Components QFS 000 The QFS 000 stainless steel tank is equipped with sight glasses to monitor the MIN / MAX level and can be fastened with a fastening accessory. Leak overflow can be selectively discharged. Circulation according to API 8 / ISO 10: Plan 1, Plan. Quench fluid supply systems are used to lubricate single or tandem mechanical seals. They act as a convenient fluid reservoir. The fluid exchange takes place by the principle of termosiphon or forced circulation, e.g. with an external pump. Technical Features Available in a range of different material combinations, it is suitable for a wide range of challenging operating conditions. Tank made of 1.71 steel: high resistance to corrosive media. Integrated overflow for the selective discharge of leaks. Additionaly or alternatively to the sightglass, it is possible to use a level switch to control the fluid volume. Combined fill and ventilation filter in the coolant tank for reliable operation. Design for average temperatures up to +00 C (+ F). Item 1 Storage tank (Capacity l) Inlet filter with vented cap Sightglass or level switch Name plate Overflow G 1/8 A B C Connections To the mechanical seal From the mechanical seal Filling Notes Install the coolant reservoir approx. 1 to m (. to. ft) above the mechanical seal. Install the connecting pipes to the mechanical seal with low resistance. Pipes should be automatically vented in the direction of the tank. It is imperative to avoid pockets of air. The minimum filling must always be above the side connection connector (in the case of the thermosiphon principle). Cooling fluid systems can be operated in two different modes: Deadend quench (Plan 1): Quench liquid from a raised tank. The characteristic feature of this principle is that there is no heat dissipated by the system. Installation, Details, Options Functional description Quench fluid systems are employed: to absorb leakage to monitor the leakage rate (e.g. through periodic reading of the level in the tank). to lubricate and to cool the outboard mechanical seal in a tandem arrangement. to preven icing. to protect against dry running. to stabilize the lubricating film. to exclude air from the media in order to prevent a reaction with oxygen in the air Circulation (Plan ): Quench liquid from a raised tank; External tank, without pressure; Thermosiphon or forced circulation. In this case the heat is dissipated by the circulation. However, the convection cooling capacity is minimal. Recomended applications Chemical industry Food processing industry Pharmaceutical industry 1

Gland Packing

Pan Fibre Packings G STK G is constructed using a composite yarn manufactured from high quality PAN fibres combined with pure Carbon fibres. The inbuilt lubrication and superior packing fibre properties of this composite yarn are further enhanced by a thorough graphite impregnation and high temperature lubricants. STK G is a soft, conformable packing, with a square, interbraided lattice construction, which creates improved sealing contact with less gland pressure. The selflubricating PAN fibre, reinforced with Carbon and heavily coated and impregnated with graphite lubricants, practically eliminates shaft scoring. STK G gives extended packing life, with reduced shaft wear and gland maintenance Applications STK G is an exceptional performance and cost general purpose packing suitable for most plant applications. Designed to replace and outperform traditional Graphited Asbestos, Glass Fibre and Natural Fibre packing Suitable for use against oils, water, steam, solvents and general chemicals. Operating Limits Valve Piston Pump Temperature 0ºC +0ºC Pressure Rating 80 Bar Rotary Speed 10 M/S ph Range 1 17

T Pan Fibre Packings Stramek T is braided from pure Poly Acrylic Nitrile (P.A.N.) fibres which are the basis of outstanding capabilities and performance of our PAN Fibre Packings. To maximise the performance of this remarkable synthetic fibre, STK T is thoroughly impregnated, Applications Wide variety of process plant including pumps, valves, mixers, reactor vessels and reciprocating applications. Against general chemicals, solvents, oils, water and steam. A wide ranging packing, for use in arduous conditions in process applications, especially where alternative packings contaminate, cause excessive wear or require frequent maintenance and replacement. STK T does not contaminate nor stain, making it particularly suitable for use in the food, water and paper industries. yarn by yarn, with heavy PTFE dispersion and further treated with special siliconefree lubricants. STK T has been specifically designed to replace traditional packings, giving enhanced performance without the shaft wear problems or the elevated costs of other synthetic fibres. STK T is a true, high specification, process industry packing. The combination of an exceptional packing fibre with advanced lubrication, gives a clean, smooth running packing, for extended life even at high shaft speeds and pressures with a wide Ph and temperature range. Operating Limits Valve Piston Pump Temperature 0ºC +0ºC Pressure Rating 100 Bar Rotary Speed 18 M/S (ExcepH Range 1 177

Pan Fibre Packings T Stramek T is a static use variant of our STK T which has been specifically designed and produced for ManLids on tanks. STK T is dense, square interbraided from P.A.N. fibres that are thoroughly impregnated with P.T.F.E dispersion. Increasing environmental awareness and legislation make consideration of the material, braid quality and performance of Tank Lid Packings of paramount importance. Stramek T is widely used in the static and road tank industry as the quality Applications ManLids, Tank Covers and Hatches against all chemicals that are compatible with PTFE. example of a braided tank packing. For the increased resilience of a rubber core, we offer Stramek STK S. This is our STK T braided round a Silicon Robber Core. Stramek STK WW1 is manufactured from pure P.T.F.E fibres with a rubber core to provide a static seal on large tank covers. Stramek T is available from stock in all standard road tank sizes whilst STK S and STK W1 are produced to order. Operating Limits Static Tanks Only Designed for ManLids, Tank Covers and Hatches Temperature 0ºC +0ªC Pressure Rating To Tank Test Rotary Speed Static Only (ExcepH Range 1 1 178

TD PTFE Stramek TD is solely manufactured from pure PTFE in the form of fine multifilament yarns. The PTFE yarns are further vacuum impregnated with PTFE dispersion to enable the packing to handle steam and gas services as well as liquids. Applications For low speed pumps, mixers, reciprocating rods and valves against up to the strongest chemicals, solvents and steam. Exceptions are molten and alkali metal and fluorine. This PTFE packing offers exceptional chemical resistance along with high strength and low coefficient of friction. The interbraid construction and the fact that STK TD will not harden in service over many years usage, ensures that a valve packed with Stramek TD is packed for life. As a packing seal, TD is far superior to machined or moulded PTFE rings in that its tensile strength is twenty times higher, but at a fraction of the cost. STK TD has a tensile strength of up to 0,000 PSI (,00Kg/cm). Operating Limits Valve Piston Pump Temperature 00ºC +80ºC Pressure Rating 00 Bar Rotary Speed M/S (ExcepH Range 0 1 17

PTFE TL Stramek STK TL is braided from pure PTFE fibres, in the form of multifilament yarns, vacuum impregnated with PTFE dispersion and saturated with chemically resistant lubricants. The PTFE fibres are preshrunk and square interbraided to produce a dimensionally stable packing. STK TL chemical pump packing exhibits high mechanical strength and high operational stability under demanding operation conditions, in addition to excellent nonfriction characteristics. Shaft wear is virtually eliminated and Stramek TL is capable of performing in service conditions for beyond conventional packings. Applications The enhanced lubrication and multifilament yarn treatment of Stramek TL allows greatly extended service capability in pumps up to 1/ms surface shaft speed. For use against solvents and virtually all chemicals with the exceptions of molten and alkali metals and fluorine. Specify STK TL to replace STK TD in higher speed, or in the most corrosive, duties. Operating Limits Valve Piston Pump Temperature 0ºC +80ºC Pressure Rating 10 Bar Rotary Speed 1 M/S ph Range 0 1 180

P1 PTFE Graphite Stramek STK P1 is 100% GORE fibre packing. This remarkable yarn is constructed from PTFE and Graphite intimately blended and locked and then treated with a high temperature, breakin lubricant. Stramek P1 is an outstanding packing for use in Applications For use whatever the value of the best quality and material packing can be realised. Since the actual purchase cost of a packing is typically only % of the true utilisation cost, Stramek recommend these PTFE GRAPHITE packings for all possible applications. They will increase service life whilst minimising wear and gland adjustments, against nearly all media in static, rotary and reciprocating uses. aggressive or arduous duties including the most difficult chemical environments. It is essentially chemically inert over the entire ph range. The unique combination of locked graphite and PTFE creates a yarn with very high thermal conductivity, that does not harden, shrink, swell nor dry out and that is exceptionally smooth that, in practically all cases, greatly extended service life can be expected. In order to obtain maximum benefit from this fibre, Stramek P1 is square interbraided via a CROSSLOK process. The construction of STK P1 increases the durability of the packing and reduces the glandpressure required to perform a seal. Periods between gland maintenance and packing replacements are thus even further extended and STK P1 CROSSLOK braiding helps overcome extrusion problems, which can be the one negative of this fibre, particularly in lower quality braids. Operating Limits Valve Piston Pump Temperature 00ºC +80ºC Pressure Rating 10 Bar Rotary Speed M/S ph Range 0 1 181

PTFE Graphite P STK P packing is manufactured from 100% Stramek STK G1 fibre. This newly developed outstanding yarn is very similar in material construction to the original GORE GFO fibre and has been manufactured to optimise performance at an improved cost. STK G1 yarn is constructed from PTFE tape and graphite interlocked to create a true synergy between these two premier packing materials. High temperature breakin and running lubricants are added to the yarns, prior to braiding in our CROSS LOK lattice. The result is an exceptional process packing that gives, often many times, longer service life in the vast majority of applicants. With the exceptions if high mechanical load (highly abrasive Operating Limits Applications For use whatever the value of the best quality and material packing can be realised. Since the actual purchase cost of a packing is typically only % of the true utilisation cost, Stramek recommend these PTFE GRAPHITE packings for all possible applications. They will increase service life whilst minimising wear and gland adjustments, against nearly all media in static, rotary and reciprocating uses. media or high pressure) or temperatures above PTFE s limit of 80 c, Stramek P is the ultimate packing. Stramek P resists all chemicals across the entire Ph range (except Oleum, Aqua, Regia, fuming Nitric Acid and Fluorine), is self lubricating and does not shrink, harden nor dry out. The packing is very cool running with exceptionally good thermal conductivity thus practically eliminating shaft scoring. Valve Piston Pump Temperature 00ºC +80ºC Pressure Rating 10 Bar Rotary Speed M/S ph Range 0 1 18

T8 PTFE Graphite Stramek STK T8 is supplied as a double construction of a 100% unscintered PTFE core with a spiral covering of PTFE tape. STK T8 provides the versatility of an extruded malleable core with the additional strength and extrusion resistance of the PTFE Applications Universal PTFE sealing material for gasketing and lifelong valve packing. For practically all chemicals. Not suitable for liquid or gaseous oxygen. tape covering. The result is a low friction, extrusion resistant, TEFLON packing with near universal chemical resistance. STK T8 will not harden nor shrink in application and provides an instant packing and instant gasket on one very economical spool. In valves, wrap STK T8 round the stem to fill the gland (no need for cut rings), tighten the gland follower and the PTFE moulds to form a tight leak free seal. STK T8 is guaranteed to last the life of the valve to which it is fitted. Operating Limits Valve Only Temperature 100ºC +0ºC Pressure Rating 10 Bar Rotary Speed 1 M/S ph Range 0 1 18

Kevlar Aramid Fibres K Stramek K is manufactured from KEVLAR Aramid fibres. In order to get maximum benefit from this material, STK K is specially treated with a high concentration of resilient, food quality lubricants and heavy PTFE dispersion. The resulting packing significantly reduces the shaft wear problems which have sometimes been associated with other KEVLAR packings and, with this increased lubrication, higher shaft speeds of up to 0m/s can be handled. K, KEVLAR Aramid fibre lube packing, is a durable, economic general service packing for 80% of plant needs. The strength of fibre and construction of STK K leads to long packing life with extended periods between necessary gland Applications For rotary and reciprocating pumps, stern glands, hydraulic presses, mixers and valves against abrasive slurries, sewage, effluents, water, oils, solvents and all bar the aggressive chemicals. Nonstaining lubrication and resilient performance make Stramek K ideal for use in the paper industry. adjustments. Operating Limits Valve Piston Pump Temperature 100ºC +80ºC Pressure Rating 10 Bar Rotary Speed 0 M/S ph Range 1 1 18

KB Kevlar Aramid Fibres Applications For pumps (rotary and reciprocating) and valves, including high pressure or high mechanical loading conditions, against abrasive slurries, sewage, effluents, water, oil, solvents and most chemicals. The nonstaining superior lubrication of Stramek KB leads to less wear and higher shaft speed capability than some other KEVLAR packings. Suitable for use in the paper industry. Operating Limits Stramek KB is an interlace, square braid packing manufactured from KEVLAR Aramid fibres impregnated with PTFE dispersion and specially treated with temperature breakin lubricant. KEVLAR offers a unique combination of extremely high tensile strength, lasting resilience, low thermal expansion, low coefficient of friction and wide chemical resistance. Stramek KB KEVLAR gold fibre packing is a true multiservice packing that is well suited to the needs of many industries, particularly where physical strength in a packing is required. The strength of KEVLAR is ideal for use as an antiextrusion, abrasion resistant backup rings, with other packing types, to increase the life of any packing combination. Valve Piston Pump Temperature 100ºC +80ºC Pressure Rating 00 Bar Rotary Speed 1 M/S ph Range 1 1 18

Kevlar Aramid Fibres KL Stramek KL is manufactured from KEVLAR Aramid fibres. In order to get maximum benefit from this material, KL is specially treated with a high concentration of resilient, food quality lubricants and high PTFE dispersion. The PTFE dispersion is done in three stages; first on the yarns, secondly during the braiding and thirdly on the surface of the finished product. The resulting packing significantly reduces the shaft wear problems which have sometimes been associated with other KEVLAR packings and, with this increased lubrication, higher shaft speeds of up to 0m/s can be handled. KL, KEVLAR Aramid fibre lube packing, is a durable, economic general service packing for 80% of plant needs. The strength of fibre Applications For rotary and reciprocating pumps, stern glands, hydraulic presses, mixers and valves against abrasive slurries, sewage, effluents, water, oils, solvents and all bar the aggressive chemicals. Nonstaining lubrication and resilient performance make Stramek KL ideal for use in the paper industry. and construction of Stramek KL leads to long packing life with extended periods between necessary gland adjustments. Operating Limits Valve Piston Pump Temperature 100ºC +80ºC Pressure Rating 10 Bar Rotary Speed 0 M/S ph Range 1 1 18

C1 Aramid Packings Stramek C1 is a Universal PaperMill and SugarMill Packing, made of a unique Aramidic composite fibre. This special fibre combines an exceptionally high tensile strength (7,000 Kg/ cm), outstanding heat resistance, linked to low friction and Applications Universal PaperMill, SugarMill and demanding application Packing, that is nonstaining, with excellent chemical resistance and is suitable for Kraft processes. Easy to cut and install, fast to breakin and with low susceptibility to adverse conditions, at installation or inuse. excellent cool running properties. This is a strong Thermoset Fibre Packing but it is also extremely soft, assisted by our exclusive, three stage lubrication process. The lowfriction factor reduces abrasion by up to 1/10th that of Aramidic Fibres, giving high reliability and life, even in the most demanding of applications. STK C1 is heat resistant and will not glaze, like usual Paper Mill and PTFE Packings, even at high shaft speeds. Operating Limits Valve Piston Pump Temperature 0ºC +0ºC Pressure Rating 10 Bar Rotary Speed 0 M/S ph Range 1 187

Aramid Packings K Stramek STK K combines the benefits of the remarkable properties of two outstanding gland packing fibres. GFO has the best combination of features of any packing fibre but it may extrude or deteriorate in high mechanical loading conditions. The addition of DU PONT S KEVLAR adds steellike strength. STK K GFO KEVLAR combipacking is square interbraided to add the strength of KEVLAR where it is most needed on the cornerposts. KEVLAR fibres are specially braided from the core to the cornerposts for dimensional stability and to resist extrusion. The GFO yarns are braided to the packing surfaces Applications STK K combines mechanical strength with surface lubricity to give a long lasting, high performance sealing, near universal packing, for use in all rotary, reciprocating and static gland applications. to enhance smooth running and sealing capability. Stramek K is THE packing for extended life in high pressure or mechanical load conditions, particularly on worn or large tolerance equipment and in the most demanding chemical environments. Shaft wear is virtually eliminated, and high speeds and aggressive chemicals can be handled, because of the presence of GFO on the sealing faces. Extrusion and gland maintenance is negligible, even in the most arduous of applications, due to the interlocked braising of KEVLAR. Operating Limits Valve Piston Pump Temperature 10ºC +80ºC Pressure Rating 0 Bar Rotary Speed M/S ph Range 0 1 188

M1 Aramid Packings Stramek M1 is a Universal PaperMill and SugarMill Packing, made of a unique Aramidic composite fibre. This special fibres combines an exceptionally high tensile strength (7,000 Kg/ cm), outstanding heat resistance, linked to low friction and Applications Universal PaperMill, SugarMill and demanding application Packing, that is white nonstaining, with excellent chemical resistance and is suitable for Kraft processes. Easy to cut and install, fast to breakin and with low susceptibility to adverse conditions, at installation or inuse. excellent cool running properties. This is a strong Thermoset Fibre Packing but it is also extremely soft, assisted by our exclusive, three stage lubrication progress. The lowfriction factor reduces abrasion to upto 1/10 that of Aramidic Fibres, giving high reliability and life, even in the most demanding of applications. STK M1 is heat resistant and will not glaze, like usual Paper Mill and PTFE Packings, even at high speed shafts. STK M is a very similar product in more economical form. It will provide the same service but care must be taken not to overtighten the gland nor starve the packing of product or flush lubrication. Operating Limits Valve Piston Pump Temperature 0ºC +0ºC Pressure Rating 10 Bar Rotary Speed 0 M/S ph Range 1 18

Aramid Packings M Stramek M is a Universal PaperMill and SugarMill Packing, made of a unique Aramidic composite fibre. This special fibres combines an exceptionally high tensile strength (7,000 Kg/ cm), outstanding heat resistance, linked to low friction and excellent cool running properties. This is a strong Thermoset Fibre Packing but it is also extremely soft, assisted by our exclusive, three stage lubrication progress. The lowfriction factor reduces abrasion to upto 1/10 that of Aramidic Fibres, giving high reliability and life, even in the most demanding of applications. STK M is heat resistant and will not glaze, like usual Paper Mill and PTFE Packings, even at high Applications Universal PaperMill, SugarMill and demanding application Packing, that is white nonstaining, with excellent chemical resistance and is suitable for Kraft processes. Easy to cut and install, fast to breakin and with low susceptibility to adverse conditions, at installation or inuse. speed shafts.stk M is a very similar product to M1 in more economical form. It will provide the same service but care must be taken not to overtighten the gland nor starve the packing of product or flush lubrication. Operating Limits Valve Piston Pump Temperature 0ºC +0ºC Pressure Rating 10 Bar Rotary Speed 0 M/S ph Range 1 10

C Carbon Graphite Fibres Stramek C is squarebraided from high quality carbon yarns impregnated with pure Graphite, special high temperature lubricants and Molybdenum Disulphide. The Carbon yarns are dense braided to provide a near frictionless, selflubricating seal. Applications STK C is ideal as a rotary duty, multiservice, packing particularly for boiler feed applications Graphite powder provide nonmigrating lubrication between the packing and the shaft. The nonglazing, high temperature lubricant protects during the packing breakin period. The addition of Molybdenum Disulphide gives high temperature and high pressure lubrication with shaft wear protection even when contact pressures between packing and shaft are excessive. STK C Carbon Fibre packing is swift to breakin because of its low friction, lubricants intensive constituents and these characteristics allow its extended life in arduous duties. Stramek STK C can be used in services where many other lubricated fibre packing fail, due to migration or loss of lubrication and consequent fibre burning, hardening or glazing. Operating Limits Valve Piston Pump Temperature 10ºC +0ºC 10ºC +0ºC 10ºC +0ºC Pressure Rating 00 Bar 00 Bar 00 Bar Rotary Speed 1 M/S 1 M/S 1 M/S ph Range 1 1 1 11

Carbon Graphite Fibres C1 Stramek C1 is squarebraided from high quality carbon yarns impregnated with pure Graphite, special high temperature lubricants and Molybdenum Disulphide. The Carbon yarns are dense braided to provide a near frictionless, selflubricating seal. Graphite powder provide nonmigrating lubrication between the packing and the shaft. The nonglazing, high temperature lubricant protects during the packing breakin period. The addition of Molybdenum Disulphide gives high temperature and Applications STK C1 is ideal as a rotary duty, multiservice, packing particularly for boiler feed applications high pressure lubrication with shaft wear protection even when contact pressures between packing and shaft are excessive. STK C1 Carbon Fibre packing is swift to breakin because of its low friction, lubricantsintensive constituents and these characteristics allow its extended life in arduous duties. Stramek STK C1 can be used in services where many other lubricated fibre packing fail, due to migration or loss of lubrication and consequent fibre burning, hardening or glazing. Operating Limits Valve Piston Pump Temperature 10ºC +0ºC Pressure Rating 0 Bar Rotary Speed 1 M/S ph Range 1 1

G Carbon Graphite Fibres Stramek STK G is a 100% pure Graphite packing which is capable of near universal application. STK G is interbraided from pure Graphite yarn impregnated fibre by fibre with pure Graphite powder. The Graphite powder increases the natural Applications For pumps and valves in extreme conditions or where the value of the best quality packing can be realised. Universal chemical resistance (sole exceptions are fuming nitric acid). sealing effect of the Graphite yarns and acts as a surface lubricant to produce a virtually nonscoring packing. Graphite fibre is superior to any other yarn in the degree to which it combines outstanding packing properties, namely; excellent thermal conduction, smooth running, near universal chemical resistance and extreme temperature capability. The use of Stramek STK G pure Graphite fibre packing provides the opportunity to extend the use of the packed gland into extreme areas of speed, temperature and chemical resistance. In more normal applications, the quality of STK G will result in maintenance savings many times in excess of the actual packing cost. Operating Limits Valve Piston Pump Temperature Up to 7ºC in Oxidising Environments Up to 70ºC in Inert Environments Pressure Rating 00 Bar Rotary Speed 0 M/S ph Range 0 1 1

Carbon Graphite Fibres R Stramek STK R combines and maximises the performance of Expanded Graphite and Graphite fibres. Expanded Graphite is the ultimate valve sealing material, but it may extrude or deteriorate, in more, mechanically demanding, rotary applications. The addition of Pan Graphite fibres adds strength and increases heat dissipation, which further enhances the packings life and performance. STK R is square interbraided, with the Pan Graphite fibres running from core to the corner posts, to give dimentional Applications Maximum capability, rotary gland packing, for an extreme range of duties, against virtually all chemicals and temperature conditions. stability and to resist extrusion. The Expanded Graphite fibres are braided to the packing surfaces, to enhance smooth running and sealing performance. Stramek R is the Expanded Graphite packing for use in rotary applications. Shaft wear and gland maintenance are virtually eliminated, as the packing is selflubricating and includes passive, corrosion inhibitors. Operating Limits Temperature Pressure Rating Rotary Speed (ExcepH Range Valve Piston Pump 00ºC +00ºC (Non Oxil) 00ºC + 00ºC (In Air) 0 700 Bar 0 M/S 0 1 (Except in Strong Oxidisers) 1

R1 Expanded Graphite Stramek GRAFAN material is essentially pure carbon in Graphite form processed into a flexible foil material without fillers, binders nor other additives. The product is self lubricating, dimensionally stable, impervious to gases and fluids, and shows exceptional Applications Extreme condition, long life and zero leakage packing for all uses, up to high temperature, high pressure, static applications only. Resists all acids, alkalis and solvents (except very stong oxidisers), gases, feed water and superheated, or saturated, steam. temperature and chemical resistance. Grafan offers unrivalled sealing capabilities under extreme temperature, media and pressure conditions giving extended packing life. Stramek R1 is a crimped Grafan Ribbon Tape, available from mm to 7mm wide, for insitu packing of Valve Stems and then it is easily compressed into a uniform packing ring. Operating Limits Valve Piston Pump 00ºC +000ºC (Inert ATM) Temperature 00ºC +000ºC (In Air) Pressure Rating 00 Bar Rotary Speed 1 M/S ph Range 0 1 1

Expanded Graphite R Stramek Style R is molded with the Pure Expanded Flexible Graphite Tapes evenly wrapped and compressed under extreme pressure to many profile rings and sizes of various densities using our highly precision steel molds. We provide a wide variety of mold dimensions ф 10~1000mm to satisfy the needs of every application. Applications The always increasing demands in the market for a high temperature resistant gasket (for firesafety) and the close cooperation in research with the most qualified ball valve manufacturers, have allowed Stramek to manufacture a highly reliable positive seals, to be specifically used as seats for ball valves. Operating Limits Temperature Pressure Rating Rotary Speed (ExcepH Range Valve Piston Pump 00ºC +00ºC (Non Oxil) 00ºC + 00ºC (In Air) 0 700 Bar 0 M/S 0 1 (Except in Strong Oxidisers) 1

R Expanded Graphite Stramek s STK R is a braided packing, constructed from 100% Grafan yarns, to form a truly exceptional capabilities and performance, pure Expanded Graphite Packing. Under compression in the gland, STK R dieforms into packing Applications Extreme condition, long life and zero leakage packing for high temperature, high pressure, high speed applications on pumps, values, mixers, agitators, expansion joints, ball valve seats and other static seals. rings like STK R, whilst offering the advantage of avoiding the need to laboriously wrap STK R1 ribbon tape around value stems or the cost of an inventory of many sizes of individual STK R dieformed rings. STK R can be merely cut to length and spiralled into the gland. There is no need for individual cut rings, as is the case with conventional braided packings. Grafan is selflubricating and will not shrink nor harden nor dry out in use. Operating Limits Valve Piston Pump 00ºC +000ºC (Inert ATM) Temperature 00ºC + 00ºC (In Air) Pressure Rating 00 Bar Rotary Speed 0 M/S ph Range 0 1 17

Expanded Graphite R1 Stramek s STK R1 is a braided packing, constructed from 100% Grafan yarns, to form a truly exceptional capabilities and performance, pure Expanded Graphite Packing. STK R1 is additionally reinforced with Inconel Wire to create the ideal packing for high temperature, high pressure values. Under compression in the gland, STK R1 dieforms into packing rings like STK R, whilst offering the advantage of avoiding the need to laboriously wrap STK R1 ribbon tape around value stems or the cost of an inventory of many sizes of individual STK R dieformed rings. STK R1 can be merely cut to length and spiralled into the gland. There is no need for individual cut rings, as is the case with conventional braided packings. Grafan is selflubricating Applications Extreme condition, long life and zero leakage packing for high temperature, high pressure, applications on values, expansion joints, ball valve seats and other static seals. STK R1 is designed for use in static applications only. Against all acids, alkalis and solvents (except very strong oxidiser), gases, feed water and superheated, or saturated steam. and will not shrink nor harden nor dry out in use. Operating Limits Valve Piston Pump 00ºC +000ºC (Inert ATM) Temperature 00ºC +00ºC (In Air) Pressure Rating 0 Bar Rotary Speed 1 M/S ph Range 0 1 18

G1D Glass Fibre Stramek STK G1D is square braided from continuous filament, texturised glass fibres reinforced with Inconel wire and impregnated yarn by yarn with pure Graphite powder and a corrosion inhibitor. Applications General purpose, nonasbestos valve packing against steam, water, oils, air, alkalis, mild acids and chemicals. Not suitable for very arduous conditions. STK G1D Graphited Glass packing is designed as a substitute to classic Asbestos packings with high temperature capability. The addition of Inconel wire reinforcement results in a true high pressure and high temperature traditional valve packing that has the advantage of being nonasbestos. Operating Limits Valve Piston Pump Temperature 100ºC +0ºC Pressure Rating 0 Bar Rotary Speed 1 M/S ph Range 11 1

Glass Fibre G1L Stramek G1L is an alternative packing for light duties. STK G1L is interbraided from continuous filament, textured airblown glass fibres thoroughly impregnated with mineral oil lubricants and graphite. A dressing and corrosion inhibitor is further applied to the yarns to improve wear resistance.stk G1L will handle nonmechanically demanding Plant Applications whilst requiring low gland pressure to seal thus reducing shaft wear and gland maintenance. Applications General purpose, nonasbestos valve packing against steam, water, oils, air, alkalis, mild acids and chemicals. Not suitable for very arduous conditions. Specify STK G1L for general plant service, at elevated temperatures, only if Carbon or Graphite fibres are not required. Glass fibres offer exceptional temperature resistance but are relatively low strength. Up to 0 c, use Stramek G for superior performance or STK K1L where higher mechanical load or very abrasive conditions exist. At higher temperatures, STK C or G are preferred. Operating Limits Valve Piston Pump Temperature 100ºC +80ºC Pressure Rating 10 Bar Rotary Speed 10 M/S ph Range 11 00

G8D Glass Fibre Stramek G8D is interbraided from continuous filament, textured, airblown glass yarns. The glass fibres are heavily lubricated and thoroughly impregnated with PTFE dispersion, both prior to and subsequent to braiding. Applications STK G8D is designed as a valve packing that is also suitable for a variety of static or slow moving applications. Stramek G8D can replace packings in general, low speed, nonarduous duties, whilst being of superior square interbraid construction. Consider that STK G8D s airblown glass fibres are kinder to the shaft and you have a naturally square packing that will seal with less gland pressure, significantly reduce shaft wear and gland adjustment and thus increase packing life in light duties. Operating Limits Valve Piston Pump Temperature 0ºC +80ºC Pressure Rating 10 Bar Rotary Speed M/S ph Range 1 01

Glass Fibre G8L Stramek G8L is interbraided from continuous filament, textured, airblown glass yarns. The glass fibres are heavily lubricated and thoroughly impregnated with PTFE dispersion and an inert lubrication, both prior to and subsequent to braiding. Stramek G8L can replace packings in general, nonarduous duties, whilst being of superior square interbraid construction. Consider that STK G8L s airblown glass fibres are kinder to the shaft and you have a naturally square packing that will seal with less gland pressure, significantly reduce shaft wear and gland adjustment and thus increase packing life in light duties. Applications STK G8L is a smooth, cool running packing for a wide variety of uses in a plant. Particularly useful on water and mildly abrasive slurries, solvents and chemicals in reciprocating and centrifugal pumps, mixers and valves. Operating Limits Valve Piston Pump Temperature 0ºC +80ºC Pressure Rating 10 Bar Rotary Speed 1 M/S ph Range 1 0

F Natural Fibres STK F is braided from selected, long fibre, heavy duty, flax yarns thoroughly impregnated yarn by yarn with PTFE and treated with breakin lubricants. The packing is designed to give a very low coefficient of friction, resistance to wear and rotting, Applications For use in paper, marine, chemical, pharmaceutical, sugar and water industries against salt water, slurries, hydrocarbons, oils, greases and solvents. good compressibility, high flexibility, high tensile strength and comparative ease of installation and takeup especially on large crosssections. Stramek F PTFE Flax packing is especially designed to seal large crosssectional areas and is ideal to solve the exacting sealing requirements of stern glands in the marine field. The packing will also be of superior service in heavy reciprocating machinery, rotary applications handling abrasive media and heavy duty static applications such as tank lid seals. Operating Limits Valve Piston Pump Temperature 0ºC +10ºC Pressure Rating 10 Bar Rotary Speed 10 M/S ph Range 1 0

Natural Fibres F Stramek STK F is squarebraided from long, heavy duty natural fibre yarns. These highstrength yarns are thoroughly impregnated, before and after braiding, with a specially blended lubricant. The packing is designed to give a very low coefficient of friction, resistance to wear and rotting, good compressibility, high flexibility, high tensile strength and ease of installation. Stramek F is an excellent, general purpose packing Applications STK F is suitable for all general waterbased applications in pumps and valves, up to 10 Deg C. especially for water duties. Its resilience, low shaft wear, ease of fitting and economic cost makes Stramek F an effective choice for many standard applications. Operating Limits Valve Piston Pump Temperature 0ºC +10ºC Pressure Rating 0 Bar Rotary Speed 8 M/S ph Range 0

GC0 Natural Fibres Stramek GC0 is a densely braided, cotton packing impregnated with a blend of mineral lubricants and graphited. Special lubricants are added to the fibres during and after braiding. These preparations produce a thorough lubrication Applications Dynamic application handling water, oil and ammonia products. General purpose pump and valve packing for water duties. that will not readily migrate, leading to minimal shaft friction and wear and extended packing life. Stramek G0 lubricated Graphited Cotton is a quality sample of a traditional water pump packing GC0 is designed to give lowcost, good packing life in general fluid handling services. Operating Limits Valve Piston Pump Temperature 0ºC +10ºC Pressure Rating 0 Bar Rotary Speed 8 M/S ph Range 10 0

Technical Information

Guide Identification Guide Mechanical Seals Company: Contact person: Phone number: Email: Application: Fluid: Pressure: Pump model: Temperature: Speed (R.P.M.): Rotary Part Spring: Single spring: Multiple spring: Wave spring: Other: Direction of rotation: Right: Left: Independent: Example: Cartidge: Conical Bellow: Bellow: Set Screw: Other: Stationary Part Example: With oring: Rubber joint: Antirotation slot: Other: Dimensions Component Seals Shaft diameter (): Exterior diameter of the rotary part (): Length of the rotary part, relaxed: Length of the rotatory part, totally pressed: Length of the rotatory part in working position (): Exterior diameter of the stat., oring includes (): High of the stationary part, from the rotating seal face till the end of the oring (): Dimensions Cartridge Seals Number of bolts: Rotation: CW (clockwise) / CCW (counterclockwise): Angle between bolts: : B: D: C: : F: D F C D B Necessary material: 08

Customer: Project: End user: Engineered Seals & Request Sheet Contact person: Email: Final Destination: Guide Drive: Top Side Bottom Arrangement: Single Double Wet Dry Lift Off Product: Materials: Shaft: mm inch Speed: Pressure: Operating: bara psia Design: barg psig Temperature: Operating: ºC ºF Design: ºF For hot service (>10ºC), cooling Water avalible: Yes No Water temp (if avalible): Certificates:.1 FDA ATEX Features: Bearing Cooling flange Debris well Special Surface Seal System Plan: Barrier Fluid: Electrical Power: Cooling available: Required Features: Voltage: Water (temp if available): Frequenz: Air Certificates: EX ia PED EX d ATEX Other notes 0

API 8 ISO 10 Operating range API 8 covers the following ranges: Shaft sizes: 0 to 110 mm Temperatures: 0 C to +00 C Pressures: 0 bar absolute to bar absolute Sealing systems for centrifugal pumps, API 8 is the title of the standard issued by the American Petroleum Institute for pumps in the hydrocarbon processing industry. The API 8, rd edition, to ISO 10, contains sealing and supply systems for applications in refineries and the chemical industry. API 8 includes a seal selection procedure as well as an aid for selecting buffer/quench fluids, seal supply systems and modes of operation. Cartridge solutions are specified for all applications. API 8 requires all parts of the seal (including its cover and shaft sleeve) to be supplied by the seal manufacturer. For the purposes of qualifying the seals, all standard types and arrangements have to be put through stipulated dynamic trial runs under defined conditions. Type A Oring seal Rotating Oring seal with multiple springs Sliding faces: reactionbonded silicon carbide against blisteringresistant carbon Fluoroelastomer Orings Hastelloy Csprings Metallic components (cover, shaft sleeve etc.) made of stainless steel (type 1) P70VN t = 0... +0 ºC Pt = 0... bar vq = m/s Single seal Type A/B Arrangement 1 Dual seal Type A Arrangement or P70VK/...PTA t = 0...+0 C p1 = 0... bar p (pp1) 10 bar vg = m/s Dual Seal Type B t =... +80 C Arrangement SFL80/... PTA p1... bar Arrangement SFL00/... PTA p = max. 7 bar SFL80N t =0...+80 C Pi = 0... bar TYPE B Bellows seal Rotating metal bellows seal with tiring secondary seals Sliding faces: reactionbonded silicon carbide against blisteringresistant carbon Fluoroelastomer Orings Hastelloy C bellows Metallic components (cover, shaft sleeve etc.) made of stainless steel (type 1) TYPE C Bellows seal Stationary metal bellows seal with graphite secondary seals Sliding faces: reactionbonded silicon carbide against blisteringresistant carbon Graphite secondary seals Inconel 718 bellows Metallic components (cover, shaft sleeve etc.) made of stainless steel (type 1) Single seal Type C Arrangement 1 SFL0S10/...EP t = 0... +00 ºC p1 = 0... bar vg = 0 m/s Dual Seal Type ES t = 0... +00 C vg = 0 m/s Arrangement SFLWT800/... PTA p1... bar Arrangement SFLWT00/... PTA p = max. 7 bar Type ES Special seal design 10

TTVORings Conical springs Types of drive Viscosity v Double PTFEencapsulated 0rings of the type used in STRAMEK mechanical seals combine the elasticity of the core materials (synthetic rubber) with the chemical and thermal resistance of the PTFE. The material PTFE features good chemical and thermal resistance, but it also displays a Coefficient of exp. 10 00 1/ 0C 00 00 00 00 100 0 00 101000 0 0 10010 0000C00 Temperature high degree of rigidity, a low coefficient of thermal conductivity, an unfavourable expansion characteristic (see graph) and a tendency to cold flow. It is advisable, therefore, to avoid the use of Orings made of solid PTFE. Rounded edges Joint on outer teflon jacket facing against direction of assembly Mechanical seal direction of assembly The assembly position of double PTFEencapsulated elastomers is critical. Care must be taken to ensure that the joint on the outer jacket faces against the assembly direction, as otherwise there is a risk of the jacket opening and being pulled off. Bending of the jacket must be avoided at all costs to prevent leaks. Slip TTV rings onto tubes for safe storage. Screw locking If no special provision is made for locking screw thread, use set screw with a suitable adhesive (e.g. Loctite) after removing any grease. When a conical spring is used for driving the seal, the mechanical seal becomes dependent on the direction of rotation. Looking toward the sliding face of the rotating parts of the seal, shafts rotating in clockwise direction require righthand springs and shafts rotating in anticlockwise direction require lefthand springs. Mounting the conical spring is easier if you twist it onto the shaft with a screwing action in the same direction as the spring coiling. This screwing action will cause the spring to open. For brief reversals of the direction of rotation we recommend other seals. Lefthand spring anticlockwise shaft Looking towards the mechanical seals Drive side (viewing direction) Direction of shaft rotation: clockwise Direction of spring coiling: clockwise Mounting: Push spring onto shaft and turn simultaneosly clockwise Righthand spring clockwise shaft Pressure vessel regulations Requirements imposed by various international standards for Pressure Vessel Code on Group III pressure vessels (Section 8) International Pressure Vessel Code orders that pressure vessels be built and operated in accordance with the generally valid rules of engineering (such as the German AD Code, ASME etc). AD Bulletin W requires every pressurebearing part made of austenitic steel to be accompanied by a material certificate EN 100.1 B or.1c. The manufacturer must subject every pressure vessel to a pressure test. Every pressure vessels must be issued with a certificate confirming its correct production and pressure testing in accordance with the Pressure Vessel Code. This certificate is included with the delivery. For a seal to function properly, the shaft torque must be transmitted uniformly to the shaft sleeve and/or rotating parts under all operating conditions. Depending on the seal design it is necessary to make allowance for centrifugal and axial forces and in some case to observe special installation instructions. Incorrect fitting can cause, for example, jamming and deformation of the seal. Typical arrangements Shrink disk Set screw with cone point Allen set screw with full dog point Conical spring Shrink disk Clamping set Set screw with cup point Drive key Spring loaded drive pin The pressure necessary for the transmission of torque is generated through clamping force on lubricated conical surfaces. The shrink disk couplings can be released at any time by slackening the tensioning screws. All the parts involved are subjected to elastic deformation only, o the original clearance is restored once the screws are released. Provided the conical surfaces are undamaged, the shrink disks can be retensioned any number of times (ensure correct lubrication). Shaft sleeves should not have a clearence diameter under the shrink disk and should make full contact with the shaft. Conversion table* The following conversion table shows the kinematic viscosity n in terms of conventional units of measurement at the same temperature. V mm/ s E R.I sec SU sec 1.0 1.00 1. 1.0.0 1.1 0... 1.17 1...0 1..7.0. 1..0 7..0 1.1..1. 1.. 0.8.0 1. 8.0.. 1...0.0 1.8 0... 1..0 7. 7.0 1.7. 8.8 7. 1.1.7 0. 8.0 1..1.1 8. 1.70 7..8.0 1.7.0.. 1.7 0. 7. 10.0 1.8 1. 8. 11.0 1... 11. 1.8.. 1.0.0 8.0.0 1..07. 7. 1.0.1 1..8 1..17. 71.7 1.0.. 7. 1..7. 7.7 1.0. 7.8 77. 1..8. 7. 1.0. 71. 81. 1.. 7. 8. 17.0. 7. 8. 17.. 7. 87. 18.0. 78.1 8. 18..71 7.8 1. 1.0.7 81.. 1..8 8..7 0.0.88 8. 7.8.0.7 10. 11. 0.0.08 1. 11..0.71 1. 1.7 0.0. 1. 18. 0.0. 0..1 0.0 7.. 78. 70.0. 8.7. 80.0 10.8.1 70.8 0.0 11.8. 17.1 100.0 1.0 0.0. 10.0 1.80 0.0. 00.0.0 81.0. 0.0.00 101.0 118.7 00.0.0 118.0 10. 0.0.0 11.0 1.1 00.0.80 1.0 18. 00.0.00 00.0 17. 00.0 7.0.0 781.0 700.0.0 8.0. 800.0 10.0 8.0 708.0 00.0 118.80.0 171. 1000.0 1.00 00.0.0 Conventional units of measurement: E = degrees Engler R = Redwood Seconds I and II SU = Saybolt Universal seconds * according to Ubbelohde mm/s cst Technical Information 11

Technical Information Circulation For single seals it is generally advisable to install a circulation pipe from the discharge nozzle of the pump to the seal chamber. A pipe size G 1/ is normally sufficient. There should be a close fitting neck bush between the pump casing and the seal chamber. Flushing Flushing systems are installed in accordance with DIN ISO 1, Appendix E, Plan No. 08a or API 10, Appendix D, Plan. A clean and mostly cold external medium is injected into the stuffing box in the area of the sliding faces via on orifice (throttle) into the medium to be sealed. Flushing is used either to lower the temperature or to prevent deposits for ming in the area of the mechanical seal. Again it is recommended that a close fitting neck bush is employed. Quench Quench is the term commonly used in sealing engineering for an arrangement that applies a pressureless external medium (fluid, vapour, gas) to a mechanical seal's faces on the atmosphere side. A quench is used on the one hand when a single mechanical seal does not function at all or only within certain limits without auxiliary measures or when a double mechanical seal with pressurized buffer medium is unnecessary. When an integral stationary seat stop is fitted, the quench pressure should not exceed 1 bar. A quench performs at least one of the duties described below. In some cases, for mechanical seals to function correctly the conditions in which they operate must be altered. This depends on the seal type, the duty conditions including environmental protection, and the type of equipment into which the seals are fitted. A simple change to a single seal's operating conditions in a deadend arrangement can be made, for instance, by adding a recirculation line from the pump discharge to the seal chamber (API Plan 1 ). As operational demands increase, so too must the capabilities of the supply units to support the mechanical seal. The following section contains the necessary information for the correct selection of supply systems and auxiliary equipment to ensure reliable operation of your mechanical seals. To guarantee the correct working of double mechanical seals, the buffer inter space (between the product side and the atmosphere side of the mechanical seal) must be completely filled with clean buffer medium. Before starting up double mechanical seals it is vital, therefore, to ensure a sufficient rate of circulation of the buffer fluid The buffer fluid pressure should lie 10 % or at least 1. to bar above the maximum pressure to be sealed. The flow rate must be controlled to ensure that the temperature of the buffer medium at the outlet lies below approximately 0 C and that it does not exceed boiling point under any circumstances. The maximum acceptable inlet/outlet temperature differential is 1 K. The buffer fluid outlet lies at the highest point of the stuffing box for automatic venting of any vapour. In view of the basic conditions of opera tion, a buffer system must perform the following functions: Buffer systems Buildup pressure in the buffer inter space Compensation of leakage Circulation of the buffer medium Cooling of the buffer medium Cooling of the seal Buffer fluid systems for liquidlubricated mechanical seals break down into two basic categories: Open circuit A circuit in which both the circulation and the pressurization take place through a single buffer fluid system. After each circuit the buffer fluid is relieved and collected in a pressureless tank. Fluid quench Absorption or removal of leakage by the quench medium Monitoring of the mechanical seal's leakage rate by periodic measurement of the level of the quench medium in the cir culation vessel or thermosyphon vessel Lubrication and cooling of the standby mechanical seal Exclusion of air: For media which react with atmospheric oxygen the queching medium stops the leakage making contact with the atmosphere Protection against dry running: For applications subject to brief, periods of vacuum and operation of pumps without pumping liquid (submersible pumps) the quenching medium prevents dry running of the mechanical seal Stabilization of the lubrication film: For operation under vacuum and/or sealing pressures close to the vapour pressure, the quenching medium stabilizes the lubrication film Cooling or heating of the outboar side of the mechanical seal. Steam quench Heating: For media with a high melt ing point the vapour quench prevents the leakage from solidifying in that area of the mechanical seal critical for its properfunctioning Exclusion of air Removal of leakage Standard cm gas/g solvent Nitrogen Mineral oil * Closed circuit In this type of circuit all the components are kept under the same pressure. Pres sure is applied by means of nitrogen or the process medium pressure or via a refill system. Pressure loss in the circuit must be taken into account when drawing up the design. Standard cm gas/g solvent Air Mineral oil * Gas quench Icing protection: With operating temperatures <0 C (cryogenic mechanical seals), the injection of nitrogen or dry air into the seal housing prevents the mechanical seal parts on the atmosphere side from icing up Exclusion of air Removal of leakage Pressure (bar) Water * viscositiy at 8 C :. mm /s Water Pressure (bar) * viscositiy at 8 C :. mm /s Sealing the quench medium Outboard minigland the preferred choice for steam, not so much for liquids Lip seals the preferred choice for oils and water Mechanical seals the preferred choice for all circulating quench fluids 1

Buffer medium The buffer medium fulfills two functions it dissipates the heat generated by the seal and it prevents the product from penetrating the sealing gap to any appreciable degree. Any liquid and any gas can be clrosen as buffer medium, with due consideration to the corrosion resistance of the parts it comes into contact with and to its compatibility with the process medium and surroundings. The buffer medium must not contain any solids. It is particularly important that liquid buffer media do not tend to precipitate and that they have a high boiling point, a high specific thermal capacity and good thermal conductivity. Clean, demineralised water satisfies these requirements to a high degree. Hydraulic oil is often used in buffer fluid units and water in closed buffer fluid circuits. Volumetric expansion [cm/l] Volumetric expansion of various buffer media D F FI LBI LBO LI LSH LSL PI PS PSL TI Q 80 0 0 0 Cooler Legend Cyclone separator Strainer Flow control valve Block valve Non return valve Orifice Drain Flush Flow indicator Liquid buffer inlet Liquid buffer outlet Level indicator Level switch MAX Level switch MIN Pressure indicator Pressure switch Pressure switch MlN Temperature indicator Quench Methylene chloride 11. 10 Methanol 10. 10 Water 18. 10 Ethanol 110. 10 0 0 0 0 t Difference between the filling temperature (noload temperature ) and the operating temperature ( ºC) Optional By vendor PI TI FI By purchaser if required Circulation systems to API 8/ISO 10 Clean pumping media if required if required if required Plan 1 Internal circulation from the pump case to the seal. Plan Dead end seal chamber with no circulation. Stuffing box cooling and a neck bush are necessary, un,ass otherwise specified. Plan 11 Circulation from the pump discharge, through an orifice to the seal. Plan 1 Circulation from the pump discharge, through a strainer and an orifice to the seal. Plan 1 Circulation from the seal chamber, through an orifice and back to pump suction. Plan 1 Circulation from pump discharge through orifice to seal chamber and trough orifice back to pump suction. (Combination of Plan 11+1). Plan 1 Circulation from the pump discharge, through an orifice and a cooler to the seal. Plan Circulation from the pump discharge, through a strainer, an orifice and a cooler to the seal. Plan Circulation by means of a pumping ring from the seal, through a cooler and back to the seal. Contaminated and special pumping media Plan 1 Circulation from the pump discharge through a cyclone separator. Plan Injection of clean fluid into the seal chamber from an external source Plan 1 Circulation from the pump case through a cyclone separator, and clean fluid through a cooler to the seal. By vendor Normally open Make up buffer fluid LBO LBI By vendor Normally open Make up buffer fluid LBO LBI Make up buffer fluid Pressure intensifier LI LSI Make up buffer fluid LBO LBI Reservoir By purchaser to collection system By purchaser to collection system LBO LBI Q D Q D Bladder accumulator LBO LBI Reservoir Reservoir Q D Bladder charge connection PI PI SH LI LSL PI SH LI LSL PI TI TI PSI PSI PSI PS if specified Make up barrier fluid if specified LSH if specified if specified Plan 1 Deadend quench (usually methanol) Plan External fluid reservoir, pressurises, thermosiphon or forced circulation as required. Plan A Circulation with thermosiphon system, pressurized. Forced circulation by pumping ring or circulation pump. Plan B Circulation with bladder accumulator and cooler, pressurized. Forced circulation by pumping ring or circulation pump. Plan C Circulation with pressure booster and cooler. Pressurized by reference pressure of seal chamber. Forced circulation by pumping ring or circulation pump. Plan Circulation of clean fluid from an external system. Plan 1 Tapped connections for the customer's use. Plan External fluid quench (steam, gas, water, etc.) Plan External drainage of high leakage controlled by a floating switch. Technical Information 1

Technical Information A AH b c D d Da dh Di dm Dw f Ff h H k k1 n p1 p p Dp pf PG pr PR PV V Q Ra t,t DT t Vg h c n Symbols Area of sliding face Area hydraulically loaded by medium pressure Width of sliding face Specific heat capacity Outer diameter of sliding face Inner diameter of sliding face Outer diameter of bellows Hydraulic diameter Inner diameter of bellows Mean diameter of sliding face Diameter of shaft Coefficient of friction Spring force Gap width Delivery head of pumping screw Balance ration Pressure gradient factor Speed Medium pressure Atmosphere pressure Buffer fluid pressure P1P; PP1; PP Spring pressure Sliding pressure Calculated load for the frictional force of the secondary seal Power consumption of sliding faces Turbulence loss through rotating parts Delivery rate Mechanical seal leakage rate Mean roughness index (calculated) Temperature of the medium to be sealed Rise in temperature of the medium to be sealed Temperature of the buffer medium Sliding velocity Dynamic viscosity Load factor Density Kinematic viscosity Single seal Mechanical seals according to EN 17 (code system) For single mechanical seals there is a distinction drawn between standard (N) and short (K) types. For double mechanical seals (backtoback) EN specifies the short type only. Designation N = standard type with I1N K = short type with I1k C = type C U = no shaft step B = with shaft step C = 0 Nominal diameters d1 and d10 of the mechanical seal Shalt/shaft sleeve diameters are always threedigit numbers beneath the stationary seat for types U and B S = independent of direction of rotation Spring type (state single spring or multiple springs in your order) Pinned stationary seat 0 = no torsion lock, without antirotation pin 1 = with torsion lack, with antirotation pin = for type C Direction of Rotation of the Mechanical Seal Type N and K I Type C Type C (is also the spring winding direction) R = clockwise Looking from the stationary seat toward the seal face Looking from the drive side with the seal face rotating in clockwise direction with the shaft rotating in clockwise direction Double seal Designation U = no shaft step B = with shaft step C = type C U = no shaft step B = with shaft step C = type C on product side on atmosphere side Nominal diameters d1 and d10 (always threedigit) Direction of rotation (see single seal) L = anti clockwise Looking from the stationary seat toward the seal face with the seal face rotating in anticlockwise direction Looking from the drive side with the shaft rotating in anticlockwise direction Position 1 Seal face Stationary seat Secondary seals Spring Position 1 7 8 Seal face inboard Stationary seat inboard Secondaryseals inboard Spring Other metal parts Sliding face outboard Stationary seat outboard Other metal parts (except seal cover and shaft sleeve) Secondaryseals outboard Antirotation pin for stationary seat on the atmosphere and/or product side 0 = without antirotation pin 1 = with antirotation pin for stationary seat on atmosphere side = with antirotation pin for stationary seat on product side = with antirotation pin for stationary seal on the atmosphere and product sides = for type C Positive retention for stationary seat on the product side 0 = without 0 = with E = for type C 1

Seal and Material Code to API 8/ISO 10 Seal designations compliant with ISO 10 1st Issue and API 8 rd Edition The seal description was redefined in ISO 108, Annex D. Contrary to the earlier arrangement, no details such as the face and 0ring materials used are included in the designation. Such details are now to be found only in the seal data sheet. The following rule applies for seal codes with four or more digits. 1st digit Seal Category Here a C is used followed by the corresponding category number 1, or to which the seal belongs. nd digit Arrangement Here an A is used followed by the number 1,, or according to the seal arrangement applied. rd digit Seal Type Here the letter A, B or C is used according to the seal in question. th digit and other Supply System Plans The cooling and/or flushing diagrams used are listed here one after the other without separating commas. Example 1: C1A1A11 Seal category 1 Seal arrangement 1 (single seal) Seal type A (0ring seal) Product circulation according to Plan 11 Example : CAB11 Seal category Seal arrangement (double seal pressureless) Seal type B (rotating metal bellows seal) Product circulation according to Plan 11 Pressureless quench according to Plan Seal locking *) to EN 17 d H11 d H11 d l l e 00 e e d1 d U B U B l l e ds 10 1 0 1. 1 1 8 8 1. 1 18 0 8 1. 1 0 0 1. d 0, Locking ring 18 8 8.0 1. 0 0 0.0. 8.0. 8 0 8 0 7. 0 1 0.0 8. 8 8.0 1. 0 1 0 0.0. 8 8 8.0. 8 8.0. 0 1 0 0.0 8. d d Balance ratio The balance ratio is a nondimensional factor of the mechanical seal and is defined as K = hydraul. loaded area AH area of sliding face A AH AH unbalanced k > 1 balanced k < 1 In practice k values are selected between 0. and 1.. With a lower k value, the safety against thermal overload will increase, but the mechanical seal may also lift off more easily. 1) Oring seal A A II) metal bellows seal Technical Information 8 8 7.0. 0 0 70 0. 8 8 7 7.0 8. 0 70 70 7.0 0. 8 8 7 7 77.0. 0 70 7 7 8. 7. 8 7 8 77 8. 70. 0 7 8 8 1. 7. 8 8 88 88 7. 0 8 0 1. 77. 8 88 8 80. 70 0 10. 8. 8 8 88. 70 7 10 10 108. 7 0. 7 80 10 10 108 10. 7. 80 8 10 11 10 1.0 7 10. 0 8 0 11 11 1 10.0 7 108. 0 0 11 1 10 1.0 7 11. 0 100 1 1 1 10.0 7 117. 100 10 1 1 10 1.0 7 1. *) not applicable for seats made of carbon. Unlike an 0ring seal, the hydraulic diameter of a bellows seal is not a fixed geometric value. It is conditional an the absolute level of the pressure to be sealed and on the direction of pressurization (internal or external pressure). 1

Boundary friction Liquid friction 1,0 Rroughness 10 m precision turned 0, Coefficient of friction f 1 m ground m tapped 1 % 0 % 0,1 m polished 0, Degree of roughness in relation to the percenage bearing 0, 0,1 Percentage bearing area % 0,0 % 0,0 0,0 0,01 10 108 107 Hydrodynamic coeff. (G) 10 10 G= 10.. p Load factor Coefficient of friction f Surface roughness Turbulence losses Pv The balance ratio is just a nondimensional factor used to assess a mechanical seal. A second one is the load factor c. The coefficient of friction f is conditional on the materials that are in contact, the medium being sealed, the sliding velocity and the designrelated conditions of contact between the sliding faces. For general considerations and calculations (see following sections), a coefficient of friction of between 0.0 and 0.08 can be applied as a good approximation. As can be seen in the graph, a lower value is obtained under improved conditions of lubrication, e.g. due to partial buildup of hydrodynamic pressure in the sealing gap. On the other hand, when a mechanical seal is run under purely hydrodynamic conditions of operation, the coefficient of friction will rise as the speed increases similar to hydrodynamic bearings. Microfinished sliding faces made of various materials display the following average, arithmetic mean roughness values (Ra): The turbulencerelated consumption of power is not significant until the circumferential speed reaches 0 m/s. It must be given due consideration particularly with special seals. The balance ratio and the load factor are practically identical when the pressure differentials to be sealed are large. The friction at the dynamic secondary seals pr is usually disregarded in the calculation. Sliding pressure PG The term "sliding pressure" is understood to be the surface pressure on the two sealing faces which remains after subtracting all those forces that act on the seal face and which are balanced by hydraulic pressures. The sliding pressure is conditional on the pressure differential to be sealed, the balance ratio, the pressure conditions inside the sealing gap i.e. gap between the seal faces (pressure gradient factor) and the spring pressure. The pressure gradient factor k] can assume values between 0 and 1, depending on the geometry of the two sealing faces. For sealing gap geometries which converge in leakage direction Vgap for externally pressurized seals the value of k1 is > 0., while for sealing gap geometries which diverge in leakage direction Agap for externally pressurized seals the value of k1 < 0.. For simplified calculations the value of k1 is generally taken to be 0.. Under unfavourable conditions the sliding pressure can become negative, causing the sealing faces to open resulting in excessive leakage. PG = p. (k k1 ) + Pf 1 Gap width h Seals with contacting faces In contact seals with a theoretically parallel sealing gap, the distance between the two sealing faces is conditional on the roughness of the surfaces. Numerous measurements taken in the laboratory and in practice with due allowance for external factors indicate that a mean gap width of less than 1 mm can be used as a basis for calculating the normal degree of leakage. Seals with noncontacting faces Hydrostatically or hydrodynamically balanced, noncontacting mechanical seals adjust automatically to a defined gap width during operation. The width of the gap depends mainly on the shape of the gap in radial as well as circumferential direction, on the operating conditions and on the medium. Tungsten carbide. nickelbonded Silicon carbide (SiC) Special cast Crsteel Carbon graphite Aluminum oxide CSiCSi/CSiC 0,01 mm 0,0 mm 0,1 mm 0,10 mm 0,1 mm 0,1 mm Power consumption The total power consumption of a mechanical seal is calculated from The power consumed by the sliding faces. The power consumption due to turbulence created by the rotating parts. The lower the roughness value, the higher the percentage bearing area and hence the higher load capacity of a mechanical seal. 0 Example: dm = 170 mm n = 00 min1 Vg = 0 m/s 00 180 10 10 10 100 00 1000 100 000 0 0 0 000 0 000 00 0 000 0 80700 0 00 0 + k + Pf Pr p Mean sliding Face diameter dm (mm) Technical Information Contact friction 00 0 0000 1 000 80 1) in (m f Sha 1 000 1 000 18000 1 000 0 0 0 0 0 dn ee t sp 10 0 0 0 0 0 Sliding velocity Vg The sliding velocity is usually quoted in relation to the mean sliding face diameter. Cooling water requeriments When estimating the amount of cooling water required by heat exchangers it can be assumed that the temperature of the cooling water will increase by K between the inlet end the outlet. This means that 1 l/min of cooling water dissipates 0 W. 70 80 0 100 Sliding verlociti vg Heat transfer The total power consumption of a mechanical seal has to be dissipated into the medium or the buffer fluid by means of appropriate measures in order to stop the seal from overheating. The necessary fluid flow rate for removal of the power losses is calculated by V = PR + PV T c Under certain conditions of installation or operation heat may pass from the product to the sealing compartment and will need to be taken into account when calculating the circulation rate. Example calculation: PR = 0 W ( 1 W = 1 J /s) T = 10 K Fluid: Water; c = 00 J (kg K) = 1 kg / dm V = 0 W kg K dm 10 K 0 Ws 1 kg = 0.01 l/s = 0. l/min

Prior to installation To fit a seal you will need its installation and operating instructions with the correct drawing. Before starting, check the dimensions, the maximum acceptable deviations ano the geometrical tolerances of the machine. Edges and shoulders All edges and shoulders onto or into which the mechanical seal is pushed during installation must be chamfered, deburred and rounded off tn less than 0 x mm. Dimensional deviations Acceptable deviations for dimensions having no tolerance specification: ISO 78 Part 1, fine/medium for linear and angular dimensions Part, tolerance class K for general geometrical tolerances Axial runout Mounting face Axial runout depends on the speed. Permissible values are indicated by the graph. Permissible tolerance (mm) 1, 1,0 0. 0. 0. 0. 0.1 0.0 0.0 0.0 0.0 0.01 0 00 1000 100 000 00 000 00 Surface finish Finished surfaces according to EN 17 Ra < =w Ra < =w Ra < =w Secondary seal material Easterners Ra < =b Nonelastomers or optional use of elastomers and nonelastomers Ra < = b Ra < =b Ra < =b Mean roughness index Ra b w. m. m 1. m 0. m Extrusion characteristics of elastmetric Orings The extrusion resistance of elastomeric Orings can be greatly enhanced by the use of support rings. Pressure differential (bar) 00 00 00 00 100 80 0 0 0 0 10 No Extrusion Extrusion Shore A hardness 70 80 0 8 0 0,1 0, 0, 0, 0, 0, 0,7 0,8 1, 0 Total radial clearance in mm Technical Information Speed n (rpm) Concentricity tolerance Shaft in accordance with ISO 1 In the area of the mechanical seal the shaft concentricity tolerance must not exceed 0 mm for diameters < 0 mm 0 mm, 80 mm for diameters between 0 and 100 mm, and 110 mm for diameters > 100 mm. Seal chamber bore For sliding velocities of vg < m/s the concentricity tolerance of the seal chamber in relation to the shaft should not exceed. mm, and when pumping screws are used it should not exceed 0.1 mm due to the effect of the pumping characteristic. If these values are exceeded please contact Stramek. Absolute cleanliness and care are essential when fitting mechanical seals. Dirt and damage to sliding faces and 0 rings jeopardize a seal's function. Any protective covering on the sliding faces must be removed without trace. Never put lubricant on the sliding faces mount only in a completely dry, dustfree and clean state. The accompanying installation instructions and the notes on the assembly drawings must be observed exactly. Installation Fitting advice To reduce the friction an 0rings when mounting seals on a shaft or when inserting seal cartridges in their housing, apply a thin coating of silicon grease or oil to the shaft or housing (N.B.: this does not apply to elastomer bellows seals). Never allow EP rubber 0rings to come into contact with mineral oil or grease. When inserting stationary seats, be careful to apply even pressure and use only water or alcohol to reduce 0ring friction. Screw locking If no special provision is made for locking screw threads, use set screws with a suitable adhesive (e.g. Loctite) after removing any grease. Venting To prevent damage to the sliding faces from dry running, the buffer space must be carefully vented after you have installed the seal. This is particularly important for those types of buffer fluid systems that do not vent themselves or are partially self venting (double seal with buffer fluid systems). Legal Disclaimer The specifications, drawings, images etc. included in this catalogue are intended to be generic and must be interpreted as equivalent or functionally equivalent. The identification of many items is facilitated by illustrations (photographs and general assembly drawings) and mention of, or reference to any specific standards, or trade names, including those that might appear on the photographs, drawings, images etc. is intended for illustration purposes only, and does not imply an endorsement or imitation or preference of any specific standard, brand, manufacturer or supplier. Neither does the information imply the availability of any mentioned items. The items discussed along with the images, drawings etc. portrayed are representative of industry catalogues, standards, terminology and specifications hence, accounting for any resemblance which otherwise may be coincidental. This Catalogue does not contain any guarantee or agreed quality of products or any warranty of merchantability, fitness for a purpose and non infringement. The data and information contained here are being provided for information only and without responsibility, and Stramek makes no representations or warranties, either expressed or implied, as to the accuracy, completeness, or fitness for a particular purpose. Stramek does not accept any responsibility or liability regarding the reliance on, or use of this data and information. Stramek is continuously improving and upgrading their products with respect to quality and application and therefore any changes made to the catalogue may be made without any notice. 17

Table of Materials Face Materals (Item 1/) Synthetic Carbons A Carbon graphite, antimony impreg. B Carbon graphite, resin impreg. approved for foodstuffs B Carbon graphite, resin impreg. B B Carbon, resin bonded C Electrographite, antimony impreg. Metal Oxides (Ceramics) V V X Y1 Y AlOxide > % AlOxide > % Steatite (Magnesia silicate) Plastics PTFE, glassfibre reinforced PTFE, carbon reinforced G T T T T1 Non elastomers Pure graphite PTFE (Polytetrafluorethylene) PTFE, glassfibre reinforced PTFE, carbon reinforced PTFE, carbongraphite reinforced Spring and Construction Mat. (Item /) Spring Materials E G S Metals CrSteel CrNiMoSteel Special cast CrMoSteel Secondary Seal Components (Item ) Elastomers, not wrapped G M 1.71 Hast. C CrNiMosteel Hastelloy C (.1 0) Nickelbase alloy Construction Materials Q1 Q1 Q Q Q Q Q Q U1 U U U U7 U7 Carbides U = Tungsten carbides Carbon Tungsten graphite, carbide, antimony Cobinder impreg. Carbon Tungsten graphite, carbide, resin Nibinder impreg. approved Tungsten carbide, for foodstuffs Nibinder Tungsten carbide, NiCrMobinder Tungsten carbide, NiCrMobinder Tungsten carbide, binderfree Q = Silicon carbides Carbon SiC, silicon graphite, carbide, antimony sintered impreg. pressureless Carbon SiC, sintered graphite, pressureless resin impreg. approved SiCSi, reaction for foodstuffs bonded SiCSi, reaction banded SiCCSi, carbon silicon impr. SiCCSi, carbon silicon impr. SiCC, SiC sintered pressureless with carbon CSiC, carbon surface silicated Standards followed: EN 17 ISO 1 B E K N P S V M1 M M M M M7 U1 Butyl rubber Ethylene propylene rubber Perfluorocarbon rubber Chloroprene rubber Nitrile butadienerubber Silicon rubber Fluorcarbon rubber Elastomers, wrapped FKM, double PTF wrapped EPDM, double PTF wrapped MVQ, double PTFE wrapped CR, double PTF wrapped FKM, FEPwrapped FKM, double PTFE wrapped/ PTFE, solid Differing Materials Perfluorocarbon rubber/ptfe M M1 M M M M D St E 1.1 F 1.01 F 1.08 F1 1.1 G 1.01 G 1.71 G 1.81 G1 1. Q 1. Q 1. T1 T1 T T T Hast. C Hast. B Carp. Monel K00 Hast. C7 Incon. 718 1.0 Titan Incon. Carp. Incon. 800 Csteel Crsteel CrNisteel CrNicast steel special CrNicast steel CrNiMosteel CrNiMosteel CrNiMocast steel CrNiMosteel CrNiMosteel NiCrMosteel M = Nickelbase alloy Hastelloy C (.1 0) Hastelloy B (.1 7) Carpenter 0 Cb (.0) Monel alloy K00 (.81 ) Hastelloy C7 (.81 ) Inconel 71 8 (.8) T = Other materials CrNiMoCuNbsteel Pure titanium (.70) Inconel (.8) Carpenter (1.1 7) Incon. 800 Incoloy 800 (1.87) 18

Distributors around the world Our distributors are carefully selected market leaders which guarantee quality, safety, reliability and delivery times over all of our products. Please visit our website if you want more information about our distribution network: Distributors www.stramek.com/index.php/distributors.html

Parque Empresarial Inbisa Avenida Las Palmeras, 18, Nave A 80, Ciempozuelos (Madrid SPAIN) www.stramek.com info@stramek.com + 18 0 77 STK Stramek0/017