GRUNDFOS DATA BOOKLET CRN12-3 A-F-G-V-HQQV 3x4/69 5 HZ Grundfos pump 9592221 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn12/9592221/crn-12-3-a-f-g-v-hqqv.html info@lenntech.com tel. +31 152 61 9 fax. +31 152 616 289 BE > THINK > INNOVATE
Position Qty. Description 1 CRN 12-3 A-F-A-V-HQQV Product No.: On request Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. Further product details Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical field around the products ensures deposition of paint particles as a thin, well-controlled layer on the surface. An integral part of the process is a pretreatment. The entire process consists of these elements: 1) Alkaline-based cleaning. 2) Zinc phosphating. 3) Cathodic electro-deposition. 4) Curing to a dry film thickness 18-22 my m. The colour code for the finished product is NCS 9/RAL 95. Pump A long split coupling connects the pump and motor shaft. It is enclosed in the motor stool by means of two coupling guards. The long coupling makes it possible to replace the shaft seal without removing the motor from the pump. The motor stool connects the pump head and motor. The pump head has a combined 1/2" priming plug and vent screw. The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system. This seal type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type is suitable for high-pressure applications. The cartridge construction also protects the pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal. Primary seal: Rotating seal ring material: silicon carbide (SiC) Stationary seat material: silicon carbide (SiC) This material pairing is used where higher corrosion resistance is required. The high hardness of this material pairing offers good resistance against abrasive particles. Secondary seal material: FKM (fluorocarbon rubber) 1/12
Position Qty. Description FKM has excellent resistance to oils and chemicals. Above 9 C, FKM should only be used in media without water. The shaft seal is retained in the pump head by a cover and screws. It can be replaced without removing the motor. The chambers and impellers are made of stainless-steel sheet. The chambers are provided with a PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surfaces, and the shape of the blades ensure a high efficiency. The pump has a stainless-steel base mounted on a separate base plate. The base and base plate are kept in position by the tension of the staybolts which hold the pump together. Both the inlet and the outlet side of the base have two pressure gauge tappings. The pump is secured to the foundation by four bolts through the base plate. The flanges are fastened to the base by means of locking rings. Motor The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. The motor is flange-mounted with free-hole flange (FF). Motor-mounting designation in accordance with IEC 634-7: IM B 5 (Code I) / IM 31 (Code II). Electrical tolerances comply with IEC 634. The motor efficiency is classified as IE3 in accordance with IEC 634-3-1. The motor has thermistors (PTC sensors) in the windings in accordance with DIN 4481/DIN 4482. The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalled conditions. Thermal switches must be connected to an external control circuit in a way which ensures that the automatic reset cannot cause accidents. The motors must be connected to a motor-protective circuit breaker according to local regulations. The motor can be connected to a variable speed drive for adjustment of pump performance to any duty point. Grundfos CUE offers a range of variable speed drives. Please find more information in Grundfos Product Center. Technical data Controls: Frequency converter: NONE Liquid: Pumped liquid: Water Liquid temperature range: -2.. 9 C Liquid temperature during operation: 2 C Density: 998.2 kg/m³ Technical: Rated flow: Rated head: Pump orientation: 12 m³/h 64.4 m Vertical 2/12
Position Qty. Description Shaft seal arrangement: Code for shaft seal: Approvals on nameplate: Curve tolerance: Materials: Base: Impeller: Bearing: Support bearing: Single HQQV CE, EAC ISO996:212 3B Stainless steel EN 1.448 AISI 316 Stainless steel EN 1.441 AISI 316 SIC Graflon Installation: Maximum ambient temperature: 55 C Maximum operating pressure: 3 bar Max pressure at stated temp: 3 bar / 9 C 3 bar / -2 C Type of connection: DIN Size of inlet connection: DN 125 Size of outlet connection: DN 125 Pressure rating for pipe connection: PN 4 Flange size for motor: FF35 Electrical data: Motor standard: IEC Motor type: SIEMENS IE Efficiency class: IE3 Rated power - P2: 3 kw Power (P2) required by pump: 3 kw Mains frequency: 5 Hz Rated voltage: 3 x 38-42D/66-725Y V Rated current: 56,-51,/32,-29,5 A Starting current: 66-66 % Cos phi - power factor:.86 Rated speed: 2955 rpm Efficiency: IE3 93,3% Motor efficiency at full load: 93.3-93.3 % Motor efficiency at 3/4 load: 93.6-93.6 % Motor efficiency at 1/2 load: 93.4-93.4 % Number of poles: 2 Enclosure class (IEC 34-5): 55 Dust/Jetting Insulation class (IEC 85): F Others: Minimum efficiency index, MEI :.7 Net weight: 372 kg Gross weight: 433 kg Shipping volume: 1.2 m³ 3/12
On request CRN 12-3 A-F-A-V-HQQV 5 Hz H [m] CRN 12-3, 3*4 V, 5Hz eta [%] 9 8 7 6 5 1 4 8 3 6 2 4 1 2 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 16 P [kw] Q [m³/h] NPSH [m] 35 P1 35 3 P2 3 25 25 2 2 15 15 1 1 5 5 4/12
G 1/2 x18 4 275 1 x28 8 4 4 X G 1/2 396 315 344 38 472 Description Value General information: Product name: CRN 12-3 A-F-A-V-HQQV Product No: On request EAN number: On request Technical: Rated flow: 12 m³/h Rated head: 64.4 m Stages: 3 Impellers: 3 H [m] 9 8 7 6 CRN 12-3, 3*4 V, 5Hz eta [%] Number of reduced-diameter impellers: Low NPSH: Pump orientation: Shaft seal arrangement: Code for shaft seal: Approvals on nameplate: Curve tolerance: Pump version: Model: Materials: Base: Impeller: N Vertical Single HQQV CE, EAC ISO996:212 3B A A Stainless steel EN 1.448 AISI 316 Stainless steel EN 1.441 AISI 316 A V SIC Graflon Material code: Code for rubber: Bearing: Support bearing: Installation: Maximum ambient temperature: 55 C Maximum operating pressure: 3 bar Max pressure at stated temp: 3 bar / 9 C 3 bar / -2 C Type of connection: DIN Size of inlet connection: DN 125 Size of outlet connection: DN 125 Pressure rating for pipe connection: PN 4 Flange size for motor: FF35 Connect code: F Liquid: Pumped liquid: Water Liquid temperature range: -2.. 9 C Liquid temperature during operation: 2 C Density: 998.2 kg/m³ Electrical data: Motor standard: IEC Motor type: SIEMENS IE Efficiency class: IE3 Rated power - P2: 3 kw Power (P2) required by pump: 3 kw Mains frequency: 5 Hz Rated voltage: 3 x 38-42D/66-725Y V Rated current: 56,-51,/32,-29,5 A Starting current: 66-66 % Cos phi - power factor:.86 Rated speed: 2955 rpm Efficiency: IE3 93,3% Motor efficiency at full load: 93.3-93.3 % Motor efficiency at 3/4 load: 93.6-93.6 % Motor efficiency at 1/2 load: 93.4-93.4 % Number of poles: 2 Enclosure class (IEC 34-5): 55 Dust/Jetting 5 4 3 2 1 2 4 6 8 1 12 14 P [kw] 611 1145 3 25 2 15 1 18 5 4 G 1/2 G 1/2 4 X G 1/2 TO AMPLIFIER RELAY TO AMPLIFIER RELAY +T 315 396 275 1 344 38 +T +T +T L1 L2 L3 L1 +T +T L2 L3 8 x 28 43 IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARE 38 472 CONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLY THERMISTORS PTC ACCORDING TO DIN 4482 22 27 4 x 18 Q [m³/h] P1 P2 1 8 6 4 2 3 25 2 15 1 5 NPSH [m] 5/12
Description Value Insulation class (IEC 85): F Motor protec: PTC Motor No: 81U15332 Controls: Frequency converter: NONE Others: Minimum efficiency index, MEI :.7 Net weight: 372 kg Gross weight: 433 kg Shipping volume: 1.2 m³ 6/12
On request CRN 12-3 A-F-A-V-HQQV 5 Hz 315 G 1/2 G 1/2 4 X G 1/2 8 x 28 275 1 344 38 4 x 18 18 1145 611 43 22 27 396 4 38 472 Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. 7/12
Exploded view 251a 251d 77 28 7 7a 17 31a 219 92 31a 11 9 92 51 11b 15 1 215a 215 66a 67 49 45 18 53a 53 215a 217 531a 534 531 534a 6 8/12
Sectional drawing (TM582 for TPE2,TPE3) 5 4 3 2 1 TM582 9/12
Exploded view ( TM5726 for MGE model H/I ) 251d 251b 291 29 293 287 287a 52 277a 273b 277 252a 286 273a 273 275a 266 268 268a 289a 289 251a 288b 288 288a 252b 159e 157 158 15 156c 156 151 152 172 154 185 178 156d 187 153 188 191 156c 156b 192 159d 1/12
Parts list CRN 12-3, Product No. On request Valid from 31.3.211 (1113) Pos Description Annotation Données de classification Référence Quantité Unité + Motor 1 pcs - Basic unit 1 pcs - Chamber stack 1 - Shaft cpl. Diameter: D22 1 Length (mm): 731,5 47b Bearing ring, rotating 47e Washer Internal diameter: D22 Outer diameter: D32 51 Pump shaft Diameter: D22 Length (mm): 731,5 64 Spacing bush 64b Lock washer 64c Spacer ring 66b Wedge lock washer 67 Hex nut Thread: M14-3 Chamber cpl. 1 47.c Bush 47d Locking ring 3b Discharge part 1-4 Chamber cpl. 1 7a Cross recess Pan head screw 45 Neck ring 47.c Bush 47d Locking ring 65 Retainer - 4a Chamber cpl. 1 O-ring Diameter: 42 Material type: FKM Thickness: 4 7a Cross recess Pan head screw 45 Neck ring 47 Bearing ring 65 Retainer 7a Cross recess Pan head screw 3 26a Strap cpl. Length (mm): 516,5 4 26b Hex socket head cap screw 4 26c Washer Designation: DIN 125A 4 Thickness: 1,6-44 Inlet part 1 Inlet part 45b Seal ring 1-49d Impeller cpl. 3 48 Split cone nut - 49 Impeller 72 Wear ring 49.b Split cone 65a Retainer 1-2a Pump head cpl. 1 2 Pump head 1 9 Hex socket head cap screw Designation: DIN 912 4 Length (mm): 25 Thread: M1-18 Air vent screw 1 Plug Spindle 23 Plug 1 37 O-ring Diameter: 255 1 Material type: FKM Thickness: 4, 11/12
Pos Description Annotation Données de classification Référence Quantité Unité 58 Cover 1 6 Spring 4 1 O-ring Diameter: 16,3 2 Material type: FKM Thickness: 2,4-6 Base cpl. Rubber type: FKM 1 6 Base 1 25 Plug 4 37 O-ring Diameter: 255 1 Material type: FKM Thickness: 4, 38 O-ring Diameter: 16,3 4 Material type: FKM Thickness: 2,4 56 Base plate 1 26 Staybolt Length (mm): 745,5 4 Thread: M 16 36 Nut Thread: M16 4 55 Outer sleeve Outer diameter: 225 1 Length (mm): 54 66a Washer Designation: DIN 125 A2 4 Internal diameter: 17 Outer diameter: 3 Thickness: 3-1a Motor stool cpl. 1 pcs 1a Motor stool 1 7 Coupling guard 2 7a Socket button head screw 4-8 Coupling cpl. Dimension: 22/55 1 9 Hex socket head cap screw Designation: DIN 912 4 Length (mm): 25 Thread: M1 1a Coupling half 2 28 Hex head screw Length (mm): 6 4 Thread: M16 28 Hex socket head cap screw Designation: DIN 912 4 Length (mm): 5 Thread: M1 32a Washer Designation: DIN 125 A 8 Internal diameter: 17 Outer diameter: 3 Thickness: 3 36 Hex nut Thread: M16 4 36 Hex head bolt 4 pcs 56b Base plate 1 pcs 66a Washer Designation: DIN 125 A2 4 pcs Internal diameter: 13 Outer diameter: 24 Thickness: 2,5-15 Shaft seal Material type: HQQV 1 pcs Adjusting fork 1 19 O-ring Diameter: 44,45 1 Material type: FKM Thickness: 3,53 11 O-ring Diameter: 21,5 1 Thickness: 4,25-2 Flange cpl. 2 pcs Gasket 1 Cable clip. 1 21 Flange Diameter: DN125 1 Pressure: PN4 23 Lock ring 1 12/12
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date. All information is copyright Grundfos. info@lenntech.com https://www.lenntech.com tel. +31 152 61 9 fax. +31 152 616 289