Singlegates Roof Flashings made of ShieldLine Materials

Trelleborg Moulded Components ChemLine FoodLine ShieldLine FrictionLine Singlegates Roof Flashings made of ShieldLine Materials

Singlegates Singlegates Trelleborg Singlegates are grommets with various design based of IP classification or application.these grommets are for leading through both low and medium power current cables as well various types of tubings. There are available Singlegates for openings based of traditional dimensions of PG-dimensions as well as new mm-dimensions. Trelleborg Singlegates are made of various types of polymers. For electrical applications, all these polymers are RoHS compliant and have excellent weather, UVand ozone resistance. Also EMC-compatible and oil resistant models are available. For other applications other high quality polymers are available based of application and requirements. Trelleborg Singlegates are supplied in various types of plastic bags and boxes based of request of customer. Standard packing sizes are available at our homepages, address www.trelleborg.com/mar-con IP67-series IP5-series There are available two different design alternatives for PG-openings. Both of these designs gives absolute protection against dust and strong jets of water and also against effects of immersion between 15 cm and 1 m. Model VET is traditional double seal design and T-VET is new design which one is possible to use as a sealing plug also. Also there are available two different design alternatives for mm-openings. Both of these designs gives absolute protection against dust and strong jets of water and also against effects of immersion between 15 cm and 1 m. Model GET is traditional double seal design and T-GET is new design which one is possible to use as a plug also. With design of GET and T-GET its possible to use cable ties for special strain relief requirements. There are available two different design alternatives for PG-openings and also for mm-openings. These designs gives protection for limited ingress of dust and against water splashed from all directions. Models with customized preholes for cables and tubes are available.

Item Packing size Item Packing size Singlegate GET -5 50 Singlegate VET -5 50 Singlegate GET 5-7 50 Singlegate VET 5-7 50 Singlegate GET 7-10 50 Singlegate VET 8-1 50 Singlegate GET 10-1 50 Singlegate VET 7-10 50 Singlegate GET 1-0 5 Singlegate VET 10-1 50 Singlegate GET 0-6 5 Singlegate VET 1-0 5 Singlegate GET 6-5 10 Singlegate VET 0-6 5 Singlegate GET 0-5 5 Singlegate VET 6-5 10 Singlegate GET 0-60 5

Singlegates Singlegate T-VET IP67 T-VET Trelleborg Singlegate T-VET -grommets are for leading through both low and medium power current cables as well various types of tubing. protection against dust and strong jets of water and also against effects of immersion between 15 cm and 1 m. The grommets are suitable for indoor and outdoor applications. The grommets fits to openings made with dimensions of PG. Model T-VET has new double seal design where top side of the grommet is closed and is therefore possible to use as plug also. Trelleborg Singlegate T-VET -grommets are available as standard of TPE-materials on table below. As request also other colours and materials like conductive EMC-material are available. More information of materials on page 17. Trelleborg Singlegate T-VET -grommets have alternative models for cables between diameters of mm up to 5 mm. Wall thickness can be between 1 to mm. The design gives IP67 Trelleborg Singlegate T-VET-grommets are inspected and certified by SGS Fimko, the Finnish authority in charge of electrical equipment safety standards. Code Packing size Material Colour Ral code Classifications Electrical number Cable diameter 1007 50 TPE EPDM Grey 70 178-5 1 0 17 1-10076 50 TPE EPDM Grey 705 UL 9;V-0 179 5 1 0 17 1 10077 50 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 170 5 1 0 17 1 100186 50 TPE EPDM Grey 70 171 5 7 16 0 19 1 10079 50 TPE EPDM Grey 705 UL 9;V-0 17 5 7 16 0 19 1 100187 50 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 17 5 7 16 0 19 1 10065 50 TPE EPDM Grey 70 17 7 10 19 1 1 100751 50 TPE EPDM Grey 705 UL 9;V-0 175 7 10 19 1 1 100188 50 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 176 7 10 19 1 1 100189 50 TPE EPDM Grey 70 177 10 1 9 1 100190 50 TPE EPDM Grey 705 UL 9;V-0 178 10 1 9 1 100191 50 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 179 10 1 9 1 10075 5 TPE EPDM Grey 70 170 1 0 9 6 1 10019 5 TPE EPDM Grey 705 UL 9;V-0 171 1 0 9 6 1 10019 5 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 17 1 0 9 6 1 10019 5 TPE EPDM Grey 70 17 0 6 8 6 0 1 100755 5 TPE EPDM Grey 705 UL 9;V-0 17 0 6 8 6 0 1 100195 5 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 175 0 6 8 6 0 1 100196 10 TPE EPDM Grey 70 176 6 5 8 57,5 1 100197 10 TPE EPDM Grey 705 UL 9;V-0 177 6 5 8 57,5 1 100198 10 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 178 6 5 8 57,5 1 Plate thickness (1.) Material meets the requirements of UL 9, moderate oil resistance

Singlegates Singlegate VET IP67 VET Trelleborg Singlegate VET -grommets are for leading through both low and medium power current cables as well various types of tubing. The grommets are suitable for indoor and outdoor applications. The grommets fits to openings made with dimensions of PG. Model VET has traditional double seal design where back side of the grommet is closed. and also against effects of immersion between 15 cm and 1 m. Trelleborg Singlegate VET -grommets are available as standard of materials on table below. As request also other colours and materials like silicones and EMC-models are available. More information of materials on page 17. Trelleborg Singlegate VET -grommets have alternative models for cables between diameters of mm up to 5 mm. Wall thickness can be between 1 to mm. The design gives IP67 protection against dust and strong jets of water Trelleborg Singlegate VET-grommets are inspected and certified by SGS Fimko, the Finnish authority in charge of electrical equipment safety standards. Code Packing sizes Material Colour Ral code Electrical number Cable diameter 100715 50 EPDM Black 17 5 1. 0 1,8 1 100716 50 EPDM Grey 70 175 5 1. 0 1,8 1 10010 50 EPDM Grey 705 176 5 1, 0 1,8 1 10011 50 CR Oil Resistant Black 177 5 1, 0 1,8 1 10006 50 EPDM Black 170 5 7 16 0 0 1 10007 50 EPDM Grey 70 171 5 7 16 0 0 1 10008 50 EPDM Grey 705 17 5 7 16 0 0 1 10071 50 CR Oil Resistant Black 17 5 7 16 0 0 1 10091 50 EPDM Black 1700 8 1 8,5 1 1009 50 EPDM Grey 70 1701 8 1 8,5 1 10070 50 EPDM Grey 705 170 8 1 8,5 1 1009 50 CR Oil Resistant Black 170 8 1 8,5 1 10095 50 EPDM Black 170 7 10 19 1 1 10096 50 EPDM Grey 70 1705 7 10 19 1 1 10070 50 EPDM Grey 705 1706 7 10 19 1 1 10070 50 CR Oil Resistant Black 1707 7 10 19 1 1 10097 5 EPDM Black 1708 1 0 9 6 1 10098 5 EPDM Grey 70 1709 1 0 9 6 1 100707 5 EPDM Grey 705 1710 1 0 9 6 1 10099 5 CR Oil Resistant Black 1711 1 0 9 6 1 10000 5 EPDM Black 171 0 6 8 6 0 1 10001 5 EPDM Grey 70 171 0 6 8 6 0 1 100709 5 EPDM Grey 705 171 0 6 8 6 0 1 1000 5 CR Oil Resistant Black 1715 0 6 8 6 0 1 1000 10 EPDM Black 1716 6 5 8 57,5 0 1 10005 10 EPDM Grey 70 1717 6 5 8 57,5 0 1 100710 10 EPDM Grey 705 1718 6 5 8 57,5 0 1 100711 10 CR Oil Resistant Black 1719 6 5 8 57,5 0 1 Plate thickness 5

Singlegates Singlegate T-GET IP67 T-GET Trelleborg Singlegate T-GET -grommets are for leading through both low and medium power current cables as well various types of tubing. against dust and strong jets of water and also against effects of immersion between 15 cm and 1 m. The grommets are suitable for indoor and outdoor applications. The grommets fits to openings made with dimensions of mm. Model T-GET has new double seal design where top side of the grommet is closed and is therefore possible to use as plug also. Trelleborg Singlegate T-GET -grommets are available as standard of TPE-materials on table below. As request also other colours and materials like conductive EMC-material are available. More information of materials on page 17. Trelleborg Singlegate T-GET -grommets have alternative models for cables between diameters of mm up to 60 mm. Wall thickness can be between 1, to 5, mm (bigger ones 1, to 5, mm). The design gives IP67 protection Trelleborg Singlegate T-GET-grommets are inspected and certified by SGS Fimko, the Finnish authority in charge of electrical equipment safety standards. Code Packing size Material Colour Ral code Classifications Electrical number Cable diameter Plate thickness 1007 50 TPE EPDM Grey 70 1785 5 1 19 0,9 1 5 1007 50 TPE EPDM Grey 705 UL 9;V-0 1786 5 1 19 0,9 1 5 1007 50 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 1787 5 1 19 0,9 1 5 10075 50 TPE EPDM Grey 70 1788 5 7 16 1,6 1 5 10076 50 TPE EPDM Grey 705 UL 9;V-0 1789 5 7 16 1,6 1 5 10077 50 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 1790 5 7 16 1,6 1 5 10078 50 TPE EPDM Grey 70 1791 7 10 0 7, 1 5 10079 50 TPE EPDM Grey 705 UL 9;V-0 179 7 10 0 7, 1 5 10070 50 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 179 7 10 0 7, 1 5 10071 50 TPE EPDM Grey 70 179 10 1 5,8 1 5 1007 50 TPE EPDM Grey 705 UL 9;V-0 1795 10 1 5,8 1 5 1007 50 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 1796 10 1 5,8 1 5 1007 5 TPE EPDM Grey 70 1797 1 0 9 8,1 1 5 10075 5 TPE EPDM Grey 705 UL 9;V-0 1798 1 0 9 8,1 1 5 10076 5 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 1799 1 0 9 8,1 1 5 10077 5 TPE EPDM Grey 70 1700 0 6 0 6 1,8 1 5 10018 5 TPE EPDM Grey 705 UL 9;V-0 1701 0 6 0 6 1,8 1 5 10018 5 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 170 0 6 0 6 1,8 1 5 10078 10 TPE EPDM Grey 70 170 6 5 50 57 9,7 1 5 10079 10 TPE EPDM Grey 705 UL 9;V-0 170 6 5 50 57 9,7 1 5 10070 10 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 1705 6 5 50 57 9,7 1 5 109 5 TPE EPDM Grey 70 1706 0 5 60 69 59,6 1 5 10071 5 TPE EPDM Grey, 705 UL 9;V-0 1707 0 5 60 69 59,6 1 5 100185 5 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 1708 0 5 60 69 59,6 1 5 1095 5 TPE EPDM Grey, 70 1709 0 60 80 89 78, 1, 5, 1007 5 TPE EPDM Grey, 705 UL 9;V-0 1710 0 60 80 89 78, 1, 5, 1007 5 TPE EPDM Black UL 9; V-0, Oil resistant (1.) 1711 0 60 80 89 78, 1, 5, (1.) Material meets the requirements of UL 9, moderate oil resistance 6

Singlegates Singlegate GET IP67 GET Trelleborg Singlegate GET -grommets are for leading through both low and medium power current cables as well various types of tubing. protection against dust and strong jets of water and also against effects of immersion between 15 cm and 1 m. The grommets are suitable for indoor and outdoor applications. The grommets fits to openings made with dimensions of mm. Model GET has traditional double seal design where back side of the grommet is closed. Trelleborg Singlegate GET -grommets are available as standard of materials on table below. As request also other colours and materials like EMC-models are available. More information of materials on page 17. Trelleborg Singlegate GET -grommets have alternative models for cables between diameters of mm up to 60 mm. Wall thickness can be between 1, to 5 mm. The design gives IP67 Trelleborg Singlegate GET-grommets are inspected and certified by SGS Fimko, the Finnish authority in charge of electrical equipment safety standards. Code Packing size Material Colour Ral code Electrical number Cable diameter Plate thickness 100589 50 EPDM Black 1781 5 1, 19 18,5 1, 5 100590 50 EPDM Grey 70 178 5 1, 19 18,5 1, 5 10018 50 SILICONE Q Red 178 5 1, 19 18,5 1, 5 100587 50 EPDM Black 1777 5 7 16, 18,5 1, 5 1001 50 EPDM Grey 70 1778 5 7 16, 18,5 1, 5 10016 50 SILICONE Q Red 1780 5 7 16, 18,5 1, 5 100578 50 EPDM Black 1761 7 10 0, 7 19,5 1, 5 1006 50 EPDM Grey 70 176 7 10 0, 7 19,5 1, 5 100581 50 SILICONE Q Red 176 7 10 0, 7 19,5 1, 5 10057 50 EPDM Black 1761 10 1 5, 19,5 1, 5 100167 50 EPDM Grey 70 176 10 1 5, 19,5 1, 5 100576 50 SILICONE Q Red 176 10 1 5, 19,5 1, 5 1007 5 EPDM Black 1765 1 0, 9 1,5 1, 5 1008 5 EPDM Grey 70 1766 1 0, 9 1,5 1, 5 106 5 SILICONE Q Red 1768 1 0, 9 1,5 1, 5 10058 5 EPDM Black 1769 0 6 0, 7 1, 5 10058 5 EPDM Grey 70 1770 0 6 0, 7 1, 5 100585 5 SILICONE Q Red 177 0 6 0, 7 1, 5 1009 10 EPDM Black 177 6 5 50, 58 0 1, 5 1000 10 EPDM Grey 70 177 6 5 50, 58 0 1, 5 1001 10 SILICONE Q Red 1776 6 5 50, 58 0 1, 5 100 5 EPDM Black 179 0 5 60, 69 5 1, 5 100 5 EPDM Grey 70 1750 0 5 60, 69 5 1, 5 1058 5 SILICONE Q Red 175 0 5 60, 69 5 1, 5 10057 5 EPDM Black 175 0 60 80, 90 60 1, 5 1005 5 EPDM Grey 70 175 0 60 80, 90 60 1, 5 1001 5 SILICONE Q Red 1756 0 60 80, 90 60 1, 5 7

Singlegates Singlegate T-GD IP5 T-GD Trelleborg Singlegate T-GD-grommets are for leading through both low and medium power current cables as well various types of tubing. The grommets are suitable for indoor and outdoor applications. The grommets fits to openings made with dimensions of PG. mm. The design gives protection for limited ingress of dust and against water splashed from all directions. Models with customized preholes for cables and tubes are available. 5 1 Trelleborg Singlegate T-GD-grommets have alternative models for cables between diameters of 9 mm up to 69 mm. Wall thickness can be between 1 to mm and bigger ones 1,5 to Code Material Colour Ral code Flame resistance Electrical number Cable diameter 1 5 10017 TPE EPDM Black UL 9; V-0 171 9 9 15,5 0 7 1 100175 TPE EPDM Black UL 9; V-0 171 11 11 18,5 7 1 100176 TPE EPDM Black UL 9; V-0 171 1,5 1,5 0,5 5 7 1 100177 TPE EPDM Black UL 9; V-0 1715 16 16,5 8 7 1 100178 TPE EPDM Black UL 9; V-0 1716 1 1 8 5 9 1 100179 TPE EPDM Black UL 9; V-0 1717 9 9 7 10 1 100180 TPE EPDM Black UL 9; V-0 1718 6 6 7 5 1 1,5 100181 TPE EPDM Black UL 9; V-0 1719 8 8 60 68 1 1,5 10018 TPE EPDM Black UL 9; V-0 170 5 5 6 75 1 1,5 10071 TPE EPDM Black UL 9; V-0 171 69 69 79 90 1 1,5 8

Singlegates Singlegate T-GDM IP5 T-GDM Trelleborg Singlegate T-GDM-grommets are for leading through both low and medium power current cables as well various types of tubing. The grommets are suitable for indoor and outdoor applications. The grommets fits to openings made with dimensions of mm. Trelleborg Singlegate T-GDM-grommets have alternative models for cables between diameters of 9 mm up to 69 mms. Wall thickness can be between 1 to mms and bigger ones 1,5 to mms. The design gives protection for limited ingress of dust and against water splashed from all directions. Models with customized preholes for cables and tubes are available. Trelleborg Singlegate T-GDM -grommets are available as standard of materials on table below. As request also other colours and materials like silicones and EMC-models are available. More information of materials on page 17. 5 1 Code Material Colour Ral code Flame resistance Electrical number Cable diameter 1 5 10665 TPE EPDM Black UL 9; V-0 17 9 9 1, 17 7 1 109 TPE EPDM Black UL 9; V-0 17 11 11 16, 1 7 1 100199 TPE EPDM Black UL 9; V-0 17 1,5 1,5 0, 5 7 1 10000 TPE EPDM Black UL 9; V-0 175 16 16 5, 1 7 1 10 TPE EPDM Black UL 9; V-0 176 1 1, 0 9 1 105 TPE EPDM Black UL 9; V-0 177 9 9 0, 8 10 1 10019 TPE EPDM Black UL 9; V-0 178 6 6 50, 58 1 1,5 1001 TPE EPDM Black UL 9; V-0 179 8 8 60, 68 1 1,5 100 TPE EPDM Black UL 9; V-0 170 5 5 70, 81 1 1,5 100 TPE EPDM Black UL 9; V-0 171 69 69 80, 91 1 1,5 9

Multigate M 0 80 M 0 80 0,00 8,00 6,00,00 6,00 6,9 5,00 5,00 10,00 0,00 60,00 80,00 150,00 Code Material Colour Classifications Electrical number 1008 TPE EPDM RAL 70 178 1009 TPE EPDM Grey RAL 705 UL 9; V-0 178 10105 TPE EPDM Black UL 9; V-0; Oil resistant (1.) 1785 (1.) Material meets the requirements of UL 9, moderate oil resistance 10

Roof Flashings Metal-sheeted Roof Flashings Roof flashings Trelleborg sheet-metal roof flashings can effectively seal electrical wires, antennas, air ventilation- and air conditioning pipes, chimneys and similar round inlets coming through sheet-metal roofs. Around the flashing goes an easily bendable aluminum flange which can be fitted to various shapes of sheet-metal roof surfaces. These Trelleborg roof flashings can be used on a flat or on profiled surface. Installation instructions: 1. Choose appropriate size flashing and cut flashing to right pipe diameter with sharp knife, if needed. Cut flashing approximately 0% smaller than exact pipe diameter. Slide flashing on pipe or antenna. If needed, shape aluminum flange to fit roof surface profile. Apply silicon sealant or equivalent between roof and aluminum flange 5. Use fasteners to fasten aluminium flange to sheet-metal roof to complete installation 6. Mount a stainless clamping collar on top of the flashing to secure weatherproof at the top Code Material Colour Electrical number Base material Base size For pipe diameter no 1 101061 EPDM Black 177 Aluminium 15 x 15 5 60 no 101059 EPDM Black 177 Aluminium 165 x 165 0 100 no 10018 EPDM Black 177 Aluminium 05 x 05 60 15 no 10017 EPDM Black 1775 Aluminium 5 x 5 80 160 no 5 101058 EPDM Black 1776 Aluminium 85 x 85 100 185 no 6 101060 EPDM Black 1777 Aluminium 5 x 5 10 0 no 7-8 10019 EPDM Black 1778 Aluminium Ø 560 0 50 11

Roof Flashings Feltroof Flashings Roof Flashings TRELLEBORG felt roof flashings can effectively seal electrical wires, antennas, air ventilation- and air conditioning pipes, chimneys and similar inlets coming through felt roofs. Flange of the flashing is sealed with bitumen between two layers of felt roof. Top of the flashing is sealed by using a stainless clamping collar. Installation requires good expertise of installation process and knowledge of the field. Therefore, in order to secure full weatherproof, we recommend to use experts in the installation process. Code Material Colour Electrical number Base size For pipe diameter no 50 / 75 / 90 105 EPDM Black 1779 Ø 50 / 75 / 90 no 110 101055 EPDM Black 1780 Ø 8 110 no 150 / 160 10 EPDM Black 1781 Ø 50 150 / 160 no 00 / 50 / 00 / 50 1006 EPDM Black 178 Ø 710 00 / 50 / 00 / 50 1

Singlegates Comparison of Materials (main properties) Comparison of Materials TPE (Thermoplastic Elastomer) excellent resistance to weathering, ozone and UV exposure provides good chemical resistance, and excellent electrical properties limited resistance for oils (resists oils as splash) flame retardant grades UL 9 V-0 (test thickness < 1,0 mm), halogen free standard hardnesses 5 ShA 70 ShA recyclable wide range of colours, easy to customize service temperature range -0 - + 100 C FDA approved grades available TPU (Thermoplastic Urethane) good resistance to weathering, ozone and UV exposure good abrasive properties limited resistance for oils (resists oils as splash) standard hardnesses 50 ShA 70 ShA recyclable wide range of colours, easy to customize service temperature range -0 - + 100 C FDA approved grades available TPV (Thermoplastic Vulcanizate) show excellent resistance to UV Light; very little change in Delta E improved oil and chemical resistance; Exhibit superior chemical resistance over a wide range of temperature (Oils / Petroleum and Sebum, Automotive fluids, aqueous solutions, acids and bases, organic solvents) flame retardant grades 50 ShA to 50 ShD, UL 9 V-0 ; 1.5mm hardness range 15 ShA to 50 ShD Temperature range continues use up to 15 C and short-term exposure up to 150 C. Brittle point lower than -60 C for most grades. Provides good low-temperature flexibility and impact toughness it looks and feels like thermoset rubber improved compression set at elevated temperatures (over 70 C) medical/food contact grades from 5 ShA to 50 ShD EPDM (Ethylene Propylene Diene Monomer) superior resistance to weathering, ozone and UV exposure provides excellent chemical resistance, and good electrical properties resists animal and vegetable oils, steam, water and oxygenated solvents flame retardant grades UL 9 V- (test thickness <,0 mm) standard hardnesses 0 ShA 70 ShA limited range of colours working temperature range -0 - + 10 C EMC grades with attenuation of 0 db 60 db NBR (Nitrile Butadiene Rubber) limited weathering resistance it is generally resistant to fuel and other chemicals. Also resistant to aliphatic hydrocarbons but less resistant aromatic hydrocarbons, ketones, esters, aldehydes and to ozone flame resistance is poor hardness range 0-95 ShA working temperature range of 0 to + 15 C environmental performances: colorability, gas permeability and water resistance are excellent other physical & mechanical properties: adhesion to metal and rigid materials are excellent, abrasion resistance, compression set and tear resistance are good to excellent CR (Chloroprene Rubber) good weathering resistance, flame retarding. Moderate resistance to petroleum-based fluids service temperature -5.+10 C adhesion to many substrates good resistance toward chemicals and ageing CR in general has good chemical stability and maintains flexibility over a wide temperature range hardness range 0 95 ShA Q (Silicone) excellent resistance to weathering, ozone and UV exposure also provides excellent chemical resistance and good electrical properties resists oils as splash flame retardant grades UL 9 V-0 (test thickness < 0,8 mm), halogen free standard hardnesses 5 ShA 90 ShA wide range of colours, easy to customize service temperature range -50 - + 00 C 1

IP-codes IP-codes First numeral Second numeral Protection against ingress of solid foreign objects IP Requirements Example Meaning protection of persons against access to hazardous parts with: Protection against harmful ingress of water IP Requirements Example Meaning for protection from ingress of water: 0 No protection No protection provided 0 No protection No protection provided 1 Full penetration of 50.0 mm diameter sphere not allowed and shall have adequate clearance from hazardous parts. Contact with hazardous parts not permitted Back of hand 1 Protected against vertically falling drops of water Vertically dripping Full penetration of 1.5 mm diameter sphere not allowed. The jointed test finger shall have adequate clearance from hazardous parts Finger Protected against vertically falling drops of water with enclosure tilted 15º from the vertical. Enclosure tilted 15º from the vertical The access probe of.5 mm diameter shall not penetrate Tool Protected against sprays to 60º from the vertical Limited spraying The access probe of 1.0 mm diameter shall not penetrate Wire Protected against water splashed from all directions Splashing from all directions 5 Limited ingress of dust permitted (no harmful deposit, refer to standard) Wire 5 Protected against lowpressure jets of waterfrom all directions Hosing jets from all directions 6 Totally protected against ingress of dust Wire 6 Protected against strong jets of water Strong hosing jets from all directions 7 Protected against the effects of immersion between 15.0 cm and 1.0 m Temporary immersion 8 Protected against longer periods of immersion under pressure Immersion 1

Assembly Assembly Step 1 Step Make appropriate size hole to blind plate or knock-out plate. Avoid rough and sharp edges. Place the grommet on the hole and pull it firmly to its place. Step Step Make a small hole into the membrane using a screwdriver or cut the top of the cone using side cutters. Push the cable or tube through the guide hole. Step 5, backside Step 5, frontside Pull the cable or tube back some 0 mm to lock it. Pull the cable or tube back some 0 mm to lock it. 15

jips.fi 01/0 We seal, damp and protect in demanding industrial environments throughout the world. Trelleborg is a global industrial group whose leading positions are based on advanced polymer technology and in-depth applications know-how. Trelleborg Industrial Products Finland Oy is a part of Product Area Trelleborg Electrical Protection. We are the leading, flexible developer and manufacturer of elastomer-based innovative custom designed solutions that address the demanding pass-thru and sealing needs of the global telecom, electronics, power and HVAC industries. We serve the customers with fast, high quality product development and rapid prototyping. Our global presentence supports multinational co-operation with flexible manufacturing capabilities. Trelleborg Industrial Products Finland Oy Kikkerläntie 7 FI-800 Sastamala Finland Tel. +58 51 6000 Fax +58 51 600 www.trelleborg.com/industrial-products Trelleborg Moulded Components (Wuxi) Co., Ltd. No. 8. Zhong Tong Road New District, Wuxi, JiangSu, PRC 11 CHINA Tel. +86 510 850 8808 Fax +86 510 850 908 www.trelleborg.com/china Trelleborg Trelleborg Industrial Products Sweden AB Stålgatan SE-70 6 Örebro Sweden Tel. +6 19 16700 www.trelleborg.com Industrial Products India Pvt Ltd 19/1 Kalena Agrahara, Bannerghata Main road Bangalore - 560076 INDIA Tel. +91 80 5189700 Fax +91 80 61109 WWW.TRELLEBORG.COM