ATEX approved Flame Arrester (Vertical, in-line, detonation ) Model Number Product Description EGIL Storagetech Model In-line Detonation Flame Arrester is designed for installation in gas pipelines. Detonation occurs when a flame travelling through the pipeline reaches supersonic velocities, usually as a result of the pipeline configuration or pipeline surface roughness. Changes in gas density and pressure causes the flame velocity to metamorphose from subsonic to supersonic. The flame quenching element is designed to be three or four times the area of the pipe in which it is installed, and is assembled between two flanged reducing spools. The element comprises a tightly rolled scroll or scrolls of crimped stainless steel ribbon to form passages through which the vapour passes. The area of each passage determines level of protection that the element provides. EGIL Storagetech Model In-line Detonation Flame Arrester has a maximum experimental safe gap (MESG) as per the standard, and is suitable for gas groups IIB and IIA. The detonation flame arrestor is more robust than the deflagration flame arrester, and contiguous scrolls have smaller MESGs to withstand higher pressures and to quench detonations. It should be installed in the pipeline where there is a significant distance between the unit and the potential source of ignition. EGS Business Park B Kat: 11 No: 19 Bakırköy, Istanbul/TUKEY E-Mail: sales@.com Phone: +90 5 0 07 (Pbx) Fax: +90 5 0 EG.FA.CTLG.0005.1
The unit is supplied with an earth point, copper tag and cable. Temperature sensor can be provided upon request. The element can easily be removed for cleaning or replacement. Construction Standard sizes 1 to DN5 to DN00 Body / Flanges 1- Carbon steel - Stainless steel AISI 1 L or 0-L - Aluminium - Customer Specification Flange drilling API Class, PN1, and Special Flame element Stainless steel AISI 1 L or 0-L O-ring seal Nitrile, Special Screen Stainless steel Paint finish 1- Powder Coating, Colour AL 900 - Epoxy Paint, Colour AL 900 - Customer Specification ATEX cert Ex II 1/ G IIB Design & Manufacturing Specifications The size of the vent should be calculated in accordance with API Standard 0 (ISO 0) - Venting Atmospheric and Low-Pressure Storage Tanks or other international standards. Additional Information Data Sheet Model 0 In-line Deflagration Flame Arrester EGS Business Park B Kat: 11 No: 19 Bakırköy, Istanbul/TUKEY E-Mail: sales@.com Phone: +90 5 0 07 (Pbx) Fax: +90 5 0 EG.FA.CTLG.0005.1
Product Benefits. EGIL Storagetech FIame Arrester Model provides safety, It blocks the flame and does not allow flame travel through a pipeline or any in out-let.. Protects environment. Flame Arrester prevents your facility against fire that is caused by explosions.. Stop the shockwaves and controls the flashback explosions. Key Features. EGIL StorageTech PVV Model internal materials are AISI 1 or 0 stainless steel.. Easy to clean internal materials.. Easy to install. You do not need a special tool or experience to install the EGIL StorageTech Fame Arrester Model.. EGIL StorageTech PVV Model comes with the paint color you choose. Standard manufacturing comes with API class flange; however other flange types are available on request. Manufacturing Materials Housing Cell Gass Group Carbon Steel 0 S.S. IIA, IIB * 0 S.S. 1 S.S. 1 S.S. Aluminum * ATEX certificate available for inch EGS Business Park B Kat: 11 No: 19 Bakırköy, Istanbul/TUKEY E-Mail: sales@.com Phone: +90 5 0 07 (Pbx) Fax: +90 5 0 EG.FA.CTLG.0005.1
Technical Drawing EGS Business Park B Kat: 11 No: 19 Bakırköy, Istanbul/TUKEY E-Mail: sales@.com Phone: +90 5 0 07 (Pbx) Fax: +90 5 0 EG.FA.CTLG.0005.1
Weight & Dimensions APPOX WEIGHT NPS DN A B " Ø 0, Ø 19x.5 " 0 Ø 15, Ø 19x 9 1 " Ø 190,5 Ø 19x 5 15 " Ø 1, Ø,x 51 0 7 " Ø 9, Ø,x 790 55 7 " Ø Ø 5,x 00 " 00 Ø 1, Ø 5,x 7 5 C D General Tolerances for Length DIN 71 (.91) Limit Measures For Nominal Measurement Area (mm) Tolerance Limit 0.5 0 0 0 0 00 00 0 f (Thin) ±0.05 ±0.05 ±0.1 ±0.15 ±0. ±0. m (Middle) ±0.1 ±0.1 ±0. ±0. ±0.5 ±0. g (Coarse) ±0.15 ±0. ±0.5 ±0. ±1. ± (Multi Coarse) - ±0.5 ±1 ±1.5 ± ± EGS Business Park B Kat: 11 No: 19 Bakırköy, Istanbul/TUKEY E-Mail: sales@.com Phone: +90 5 0 07 (Pbx) Fax: +90 5 0 EG.FA.CTLG.0005.1
Flow Capacity Tables Pressure drop [In WC] Pressure drop [oz/in ] 1.5 1. 1.7..5. 5..9 1 9. 1 1 1.1 1.9.9.5.5.0.7.07 5.5.5. 7.7 1.0 1.1 15.0 1. 1. 17.7 17.0 1.7 19.1 1.70.0.1.7 5..9 7.0.09 7.95 9.0.7 11. 19...1.0.. 5..1..15..09.7.55 7..7 7.70.1.1 15.9 15.0..1 7.7 7.9 0.7..5 5.7.7.5.09.7 5.1 7.70 9.17.17 9.11 11. 1. 1. 17.. 0.7.5.0. 9..5..5. 5.09 5.9 7.09 9.0 11.. 11.5 1. 17... 5.9.5 0.7 1. 5.9 9..9 5.7 55..77 5.95.. 11. 1. 1.7 1. 17.5.... 5.1 7.7 9. 5. 5.7 5.0. 5...70 7.9 9.. 15.0 1.5 15.5 19.9. 9.9 0. 7. 51.1 5.9 5. 1.7.7.1 7. 7.9.7 7.9..5 1. 1. 1. 17. 1.9.0.9. 5.9 5.5 59..5.5 7.1 7. 0.. 5.1. 9.79. 1. 19. 1.. 5. 0.5. 9..1. 9.7 7.9 0. 7. 7.1 95.0 9..7 9.9 11.0 1. 1. 1.9..1 9...0 5. 70. 7.9 7.9.1 9.0 9. 99. 11 7.07.7. 15.7.7.0. 5.7..0 7.. 77.9. 7.0 9.5 1 1 1 5 7.71 11. 1.1 17.1..1.5.0 5. 1. 51. 55.0. 90. 9.7 111 1 1 1 NOMINAL ELEMENT DIAMETE (IN) NOMINAL PIPE SIZE (IN) Flow Capacity (0 SCFH at 0 F) 0 0 0 0 Flow Capacity (NCMH at 0 C) 00 NOMINAL ELEMENT DIAMETE (MM) NOMINAL PIPE SIZE (MM) Pressure drop [mm WC] Pressure drop [mbar] 00 00 0 00 0 7 0 7 7 7 5.5.9 7. 9. 1.7 19..5 00 9 00 9 0 9 00 59 700 9.7 55.0 5. 7. 1 117 15 17 5 5 7 0 0 19 7 7 5 57.7 0. 9. 1 5 55 59 9 7 7 0 5 1.5 117 1 1 5 51 1 9 55 0 97 79 795 01 0 95 91 51 7.7 117 1 11 1 91 1 0 5 9 0 91 95 0 1 1 7 91. 1 19 7 0 5 9 5 9 1 11 119 115 17 159 155 170 19 1 9 1 59 7 7 09 9 17 11 1555 1 11 19 7 0 7 59 5 170 15 15 1 177 19 195 1 1 0 0 77 5 9 9 7 9 9 1517 0 1707 179 19 1 9 91 11 7 57 77 55 07 5 71 7 97 111 171 19 1999 119 17 97 7 1 7 1 0 59 9 9 9 1 1 59 1 0 9 9 59 9 99 9 15 1 9 91 159 159 5 595 1 7 90 79 17 0 1 117 171 1577 5 715 91 1 5 5 99 1. Flow facility and equipment comply with API 0.. Flow capacities were determined from actual tests. EGS Business Park B Kat: 11 No: 19 Bakırköy, Istanbul/TUKEY E-Mail: sales@.com Phone: +90 5 0 07 (Pbx) Fax: +90 5 0. Flow data are for inline mounting and do not include external piping losses. EG.FA.CTLG.0005.1