Price quote for: TRACTOR: LOADER-BACKHOE Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: RDO Equipment Company Jesse Miller 12500 Dupont Avenue South Burnsville, MN 55337 612.202.6906 800.950.3298 952.890.7046 jmiller@rdoequipment.com Spec # Information Requested Answer 1.0 Make & Model John Deere 310SK TC Engine HP gross/net (SAE) Aspiration Transmission, type and number of forward and reverse gears Net 102 hp Turbo-charged 5 speed, helical-cut gears, full PowerShiftTM transmission with hydraulic reverser standard; electric clutch cutoff on loader lever. 5 forward, & 3 reverse gears Hydraulic pump (GPM and PSI) GPM for backhoe GPM for loader Brakes Steering Drive Axles 84 gpm @ 3,625 psi 42 gpm 42 gpm Service: Power assisted, hydraulic wet disc, mounted inboard, self-adjusting and self-equalizing Parking: Spring applied, hydraulically released, wet, multi-disc, independent of service brakes with electric switch control Hydrostatic power steering and emergency steering Mechanicla Front Wheel Drive & Rear Axle Electric, foot actuated, 100% hydraulic locking Front tires, size and type 12.5/80-18 I-3 (14) Rear tires, size and type 19.5L-24 R-4 (10) Backhoe digging depth (SAE) (Standard stick) Backhoe digging depth 2' flat bottom (SS) Backhoe reach from swing pivot at ground line (SS) Backhoe loading height (SS)
Backhoe loading reach (SS) Backhoe digging depth (SAE) (Retracted extendable stick) Backhoe digging depth (SAE) (Extended extendable stick) Backhoe digging depth 2' flat bottom (RES) Backhoe digging depth 2' flat bottom (EES) Backhoe reach from swing pivot at ground line (RES) 14 ft. 11 in. 18 ft. 5 in. 14 ft. 9 in. 18 ft. 3 in. 18 ft. 7 in. Backhoe reach from swing pivot at ground line (EES) Backhoe loading height (RES) Backhoe loading height (EES) Backhoe loading reach (RES) Backhoe loading reach (EES) Loader capacity (SAE) standard bucket Loader standard bucket width Loader maximum operating height Loader lift capacity at maximum height Loader breakout force Loader maximum hinge pin height Loader dump reach at maximum height Loader maximum bucket roll back at ground level Loader digging depth, with bucket flat Lights, front/rear Gauges 21 ft. 11 in. 11 ft. 3 in. 14 ft. 1 in. 1.31 cu. yd. 92 in. 11 ft. 2 in. 5,850 lb. 9,680 lb. 11 ft. 2 in. 32.9 in. 40 deg. 6 in. 4 front driving/working, 4 rear working (32,500 candlepower each) Digital display of engine hours, engine rpm, and system voltage. Oil-temperature gauge. Fuel gauge. Monitor system with audible and visual warnings: Engine air restriction / Low alternator voltage /Engine oil pressure / Hydraulic filter restriction /Parking brake on/off / Aftertreatment temperature/ Transmission oil temperature / Fuel / Hour meter / Machine diagnostic information via 4- push-button/lcd operator interface Warranty Term (months, years) 1 year full machine unlimited hours BASE UNIT PRICE: 87,805.74
Price quote for: TRACTOR: LOADER-BACKHOE VENDOR ME: RDO Equipment Company MAKE AND MODEL John Deere 310SK TC Spec # Description Qty Price Subtotal 1.0 BASE UNIT PRICE: 87,805.74-2.0 OPERATOR ENVIRONMENT Use this section to offer operator environment options. Number items starting with 2.1, 2.2, etc. Use as many numbers as you need. 2.01 2025 Canopy with Floor mat & Headliner (7,206.19) 2.02 9045 Chrome Exhaust Extension 93.39 2.03 2085 Ultimate Cab w/dual Doors and Air Conditioning In Base Price 2.04 9210 Left Side Console Storage w/cup Holders 40.43 3.0 ELECTRICAL Use this section to offer electrical options. Number items starting with 3.1, 3.2, etc. Use as many numbers as you need. 3.01 8675 Dual Batteries 1900 CCA In Base 3.02 AT313583 John Deere Two Bulb Amber Strobe and Switch (magnet mounted) 556.67 3.03 AT313592 John Deere Amber Rotating Beacon 697.89 3.04 AT313589 Beacon Wiring and Switch Kit 305.77 4.0 POWERTRAIN Use this section to offer powertrain options. Number items starting with 4.1, 4.2, etc. Use as many numbers as you need. 4.01 3085 Mechanical Front Wheel Drive w/open Differential and PS Transmission In Base 4.02 9941 AutoShift - Automatic Transmission 1,973.24 4.03 9505 Full MFWD Guard 218.11 5.0 AXLES & TIRE OPTIONS Use this section to offer axle and tire options. Number items starting with 5.1, 5.2, etc. Use as many numbers as you need. 5.01 4781 Firestone 19.5L - 24 In. 10PR (R4) Tubeless Rear &12.5/80-18 In. 12PR Traction Front Sure Grip Lug Tires 86 in. (2.18 m) overall width. Rear tire chains require wheel spacers 5.02 4780 Goodyear 19.5L - 24 In. 10 PR (R4) Tubeless Rear & 12.5/80-18 In. 14 PR Traction Front Sure Grip Lug Tires 86 in. (2.18 m) overall width. Rear tire chains require wheel spacers. In Base Price No Charge 5.03 4782 Michelin 500/70 R24 XMCL Radial Rear Tubeless Tires With 340/80 R18 XMCL Radial Front Tires 85 in. (2.16 m) overall width. Rear tire chains require wheel spacers. 2,716.05 5.04 4891 Firestone 21Lx24 12PR (R4) Tubeless Rear & 12.5/80-18 10PR Traction Front Sure Grip Lug Tires 92 Inches (2.33 M) overall width Rear tire chains require wheel spacers. 1,508.45 5.05 AT371257 MFWD Wheel Fender Kit for 18 in. tires only 1,058.90 6.0 HYDRAULICS Use this section to offer hydraulic options. Number items starting with 6.1, 6.2, etc. Use as many numbers as you need. 6.01 5285 Deere Backhoe Pattern 2-Lever Pilot Controls with Pattern Selection 1,405.47 - Loader Hydraulics - 6.02 7085 Loader and Coupler w/ 3 Function Hydraulics - 2 Lever Includes Ride Control For multi-purpose coupler bucket and front attachments. Includes valve with circuit relief and.5 in. (12.7 mm) hoses and steel lines to loader cross tube. Will accept 310G, SG, SJ, SK & 410G, J, K loader coupler buckets 5,287.04-7.0 BACKHOE OPTIONS Use this section to offer backhoe options. Number items starting with 7.1, 7.2, etc. Use as many numbers as you need. 7.01 5095 Extendible Dipperstick and Auxiliary Hydraulics with Thumb Mounting Ears Seven-function hydraulics Includes 6th Function with left foot pedal for cylinder-actuated attachments less plumbing Selective flow control valve (9,13,16,18,22 or 25GPM) for one-way flow 1000-3000 PSI adjustable Flow control auxiliary plumbing with foot switch Extended stabilizers with pin-lock reversible pads Thumb cylinder ears compatible with Deere thumbs only 2,219.83 7.02 5400 Less Coupler In Base
7.03 5410 DEERE Standard Quick Coupler For use with DEERE 310E, G, J, K Series Backhoe Buckets. Not compatible with 310SE, SG, SJ, SK, 410E, G, J, K buckets 665.72 7.04 5420 Multi-Brand Quick Coupler For use with DEERE C, D, SE, SG, SJ, SK Series buckets and with Case K-L-M and CAT C Series Buckets. Not for use with 710 Buckets. Spacers are recommended for CAT and Case buckets, contact DMAC. 754.56 7.05 5430 Top Hook Quick Coupler For use with DEERE Top Hook Coupler bucket codes 5630 (7.11) or 5660 (7.13) and CP or Pre-XLS Wain Roy Top Hook Buckets 606.49 7.06 5440 New Series Multi-Brand Quick Coupler For use with CAT D and E, Case K-L-M, and DEERE SE, SG, SJ and SK Series backhoe buckets 786.45 7.07 5450 Universal Coupler - Pin-grabber style coupler For use with DEERE C- D-SE-SG-SJ & SK Series buckets and with Case K-L-M and CAT C,D & E Series Buckets. Not for High Capacity Buckets and 710 Buckets. UNIVERSAL COUPLER will not work with most thumbs. 1,132.12 7.08 5600 Less Backhoe Bucket with Bucket Pins In Base 7.09 5616 12" (305 mm) Wide - HD - 3.3 Cu. Ft. (.09 Cu. M.) Capacity 595.67 7.10 5626 18" (457 mm) Wide - HD - 5.1 Cu. Ft. (0.14 Cu. M.) Capacity 690.21 7.11 5630 Top Hook 18" (457 mm) Wide - HD - 5.1 Cu. Ft. (0.14 Cu. M.) Capacity Coupler Backhoe Bucket Requires Code 5430 (7.05) Top Hook Coupler 674.26 7.12 5656 24" (610 mm) Wide - HD - 7.5 Cu. Ft. (0.21 Cu. M.) Capacity 695.33 7.13 5660 Top Hook 24" (610 mm) Wide - HD - 8.8 Cu. Ft. (0.25 Cu. M.) Capacity Coupler Backhoe Bucket Requires Code 5430 (7.05) Top Hook Coupler 932.81 7.14 9025 Hydraulic 4-Tine (Extendible Dipperstick) Backhoe Thumb Requires code 5095 (7.06) Includes plumbing from valve to thumb. Requires backhoe bucket code 5656 (7.12). Not for use with backhoe coupler Codes 5430 (7.05), 5450 (7.07) 3,506.85 7.15 5658 24" (610 mm) Wide - Severe Duty - 7.5 Cu. Ft. (0.21 Cu. M.) Capacity 844.54 7.16 5676 24" (610 mm) Wide - HD - 8.8 Cu. Ft. (0.25 Cu. M.) Capacity Backhoe Bucket 954.45 7.17 5678 24" (610 mm) Wide - Severe Duty - 8.8 Cu. Ft. (0.25 Cu. M.) Capacity 988.05 Magnum Breakers & Compactor 7.18 RHB 305 Breaker - 750 Lb with Top Cap for JD 310K TMC (Includes Moil or Chisel Tool) 9,867.14 7.19 RHB 306 Breaker - 1200 Lb with Top Cap for JD 310K TMC (Includes Moil or Chisel Tool) 14,659.03 7.20 RHP 20 Magnum Compactor 6,870.81 8.0 FRONT LOADER OPTIONS Use this section to offer front loader options. Number items starting with 8.1, 8.2, etc. Use as many numbers as you need. Counterweight 8.01 8415 Heavy Duty Bumper Recommended for: Standard Backhoe w/o Aux. Hyd. Extendible Backhoe w/ Multipurpose Bucket 116.74 8.02 8425 450 Lb Front Counterweight 324.60 8.03 8455 750 Lb. (340 kg) Front Counterweight Recommended for: Extendible Backhoe w/ 1.0 c.y. Loader Bucket and w/o Coupler Extendible Backhoe w/ 1.13, 1.2, or 1.25 c.y. Loader Bucket 526.20 8.04 8475 1000 Lb. (454 kg) Front Counterweight Recommended for: Standard Backhoe w/ rear attachment and w/o Backheo Coupler Extendible Backhoe w/ 1.0 c.y. Loader Bucket w/o Backhoe Coupler 724.95 8.05 8485 1250 Lb. (567 kg) Front Counterweight Recommended for: Standard Backhoe w/ rear attachment and w/o Backhoe Coupler Standard Backhoe w/ Aux. Hyd. and Backhoe Coupler Extendible Backhoe w/ 1.0 c.y. Loader Bucket and Backhoe Coupler 927.68 Forks 8.06 AT308139 Forks, Pallet (2) 60 in.(1.52m) with 60 in. (1.52m) Coupler Fork Carriage 3,189.54 8.07 AT308138 Forks, Pallet (2) 48 in.(1.22m) with 60 in. (1.52m) Coupler Fork Carriage 3,067.14 Couplers and Coupler Loader Buckets 8.08 7605 Less Coupler Bucket No Charge 8.09 7650 1.3 Cu. Yd. (1.0 Cu. M.) 92 in. (2.34 m) wide Heavy-Duty Long-Lip Coupler Bucket without Cutting Edges or Skid Plates. 1,839.99 8.1 7690 1.32 Cu. Yd.(1.0 Cu. M.), 92 in.(234 mm) wide Multipurpose Coupler Bucket Requires Code 7085, Aux. Loader Coupler Hydraulics Cannot be used with code 8485 or 8495 Counterweight. Includes reversible bolt-on cutting edge and skid plates. Pre-drilled for eight teeth - Order teeth from parts. Includes two lift holes. 3,800.70 8.11 AT308970 LDR Coupler Bucket 1.13 Cu. Yd. (.86 Cu. M.) Heavy Duty 86 in. (2.18 m) wide Long Lip with Reversible Bolt On Cutting Edge and Skid Plates 2,604.57 8.12 AT308968 LDR Coupler Bucket 1.25 Cu. Yd. (.96 Cu. M.) Heavy Duty 86 in. (2.18 m) wide Long Lip without Bolt-On Cutting Edges or Skid Plates 2,621.34
8.13 AT308991 LDR Coupler Bucket 1.13 Cu. Yd. (.86 Cu. M.) Heavy Duty 86 in. (2.18 m) wide with Reversible Bolt On Cutting Edge with Skid Plates 2,686.91 8.14 AT363771 LDR Coupler Multipurpose Bucket 1.25 cu. yd. (.96 cu. m) 86 in. (2.18 m) wide with Reversible Bolt On Cutting Edges and Skid Plates Requires Aux. Loader Coupler Hydraulics. 86 in. (2.18 m) bucket width. Includes reversible bolt-on cutting edge and skid plates. Pre-drilled for seven teeth. Order teeth from parts. Includes two built-in lift loops. 5,627.15 8.15 AT363772 LDR Coupler Multi-Purpose Bucket 1.32 cu. yd. (1.0 cu. m) 92 in. (2.34 m) with Reversible Bolt On Cutting Edges and Skid Plates Predrilled for eight teeth. Includes two built-in lift loops. Proper counterweighting is required. See Counterweight Selection Chart. 5,840.65 9.0 PERFORMANCE OPTIONS Use this section to offer performance options. Number items starting with 9.1, 9.2, etc. Use as many numbers as you need. 9.1-9.2-10.0 HOURLY SHOP LABOR RATE: 108.00 (Installation services may be requested on an as needed basis) 11.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price 15.82
12.0 EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 10.1, 10.2, etc. (Specify years, miles or hours extended term covers.) 12.01 12.02 Price: - 12.03 Price: - 12.04 Price: - Price: -
13.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: Weekly Rental Rate: Monthly Rental Rate: Percent (%) of Rental Fee applied to purchase price: If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: N/A N/A 930.00 2,785.00 90% 14.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price. 15.82 15.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS 0% AND ACCESSORIES - (See Special Terms and Conditions) N/A Price List Date and Number 16.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED 14.01 DELIVERY STARTING POINT - City, State, Zip 14.02 DELIVERY STARTING POINT - City, State, Zip 14.03 DELIVERY STARTING POINT - City, State, Zip 14.04 DELIVERY STARTING POINT - City, State, Zip 14.05 DELIVERY STARTING POINT - City, State, Zip 14.06 DELIVERY STARTING POINT - City, State, Zip 14.07 DELIVERY STARTING POINT - City, State, Zip 14.08 PRICE PER LOADED MILE: 14.09 MINIMUM DELIVERY CHARGE: Burnsville, MN 55337 Grand Forks, ND 58203 Marshall, MN 56258 Moorhead, MN 56560 North Mankato, MN 56003 Rochester, MN 55901 Sauk Rapids, MN 56379 4.75 350.00