Control module RE 51156/05.13 Replaces: 09.11 1/96 ype IH15 Component series 1 Maximum operating pressure 350 bar Maximum flow 30 l/min H//D 7228 able of contents Contents age Features 2 Description, general 2 echnical data 3 roject planning information 3 Overview of the modules 4 to 7 asic module ttachment 8 ank connection module 9 to 11 ressure relief module 12 Module block 13 Directional seat valve module ttachment 14 ank connection module 15 to 16 ressure cut-off module 28 ressure relief module 17 and ressure relief module with circulation valve 27 ressure filter module 20 to 21 ressure reducing module 29 to 30 End module 58 Contents age End module with pressure relief valve, accumulator and stop valve 59 to 60 Filter module with pressure relief valve 22 to 23 Filter module with pressure relief valve and circulation valve 24 to 25 Cooler module 18 to 19 Module with check valve 53 to 54 Module S 46 to 47 Module SDV 49 Module S3 50 to 51 ccumulator shut-off module 61 to 62 Circulation module 45 Sandwich module 35 to 38, 41 Sandwich module in special design -008 39 to 40 Sandwich module with pressure relief valve 31 to 32 Sandwich module with lowering brake valve 33 to 34 Sandwich module with cartridge valves 42 to 44 Sandwich module with accumulator shut-off block 56 to 57 Continued on page 2
2/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 able of contents Contents age Module for external attachment ttachment with application examples 63 to 64 Connection module 65 to 66 Connection module with pressure relief valve 67 End module 72 Sandwich module 68 to 71 Reducing module ank connection module with reduction from IH15 to IH15 73 Reducing module IH15 to IH20 (left) 74 Reducing module IH15 to IH20 (right) 76 Reducing module IH15 to IH15 (right) 75 Module with threaded connection for pipeline installation ank connection module for sandwich module with threaded connection 77 Sandwich module with threaded connection 78 to 79 Contents age Module for drive module UE5 Description, general 80 ttachment 80 Connection module 81 to 82 ank connection module 83 Filter module 84 to 85 roject planning information 80 ccumulator shut-off module 86 to 87 ype key Information on the type key 88 to 92 ype keys for modules with vertical stacking 93 ype key for complete control system 93 ccessories Filter element 94 ssembly tool for filter cartridge 94 Dimensions Unit dimensions 95 ank break-through 95 Features Compact design No piping of the control Few joints Variable set-up Can be combined individually Direct mounting on power unit tank cover; external set-up possible, as well Ready for connection Description, general he IH15 control modules serves the realization of complete hydraulic controls. hey can be fitted and mounted individually. he directional valve modules and seat valve modules can be combined. Using the tank connection modules, the control modules can be directly mounted to the tank cover of the oil tank. Using the modules for external attachment, the control modules can, however, also be installed arbitrarily into every system. he reducing modules allow for attachment of the IH15 modules to IH15 and IH20 modules. he modules have preferably been designed for hydraulic controls for low-flow actuators up to a flow of 30 l/min. hey are connected by means of three tie rods.
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 3/96 echnical data (For applications outside these parameters, please consult us!) hydraulic Installation position ny 1) Hydraulic fluid Mineral oil (HL, HL) according to DIN 51524 part 2 2) ; fast biodegradable hydraulic fluids according to VDM 24568 (see 90221); HEG (rape seed oil) 2) ; HEG (polyglycols); HEES (synthetic esters) 3) ; other hydraulic fluids upon request Hydraulic fluid temperature range C 30 to +80 (with NR seals) 20 to +80 (with seals) (observe the admissible viscosity range of the valves!) mbient temperature range C 30 to +50 Viscosity range mm 2 /s 2.8 to 500 1) Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) Valve pressure rating Maximum flow of the directional seat valves type: KSER1... q v l/min Class 20/18/15 1) Refer to the related data sheet 20 (2/2 directional seat valve) 12 (3/2 directional seat valve electric Voltage type Direct voltage vailable voltage 4) U V 24 Voltage tolerance (nominal voltage) % ±10 ower consumption W 19 and/or 30 1) Switching time according to ISO 6403 On ms 25 to 80 Off ms 10 to 25 Switching frequency cy/h up to 15,000 rotection class according to EN 60529 5) (VDE 0470-1) I 65 DIN 40050-9 Coil temperature 6) C 150 1) Observe the valve details 2) Suitable for NR and seals 3) Suitable only for seals 4) Special voltage on request 5) With mating connector mounted and locked 6) Due to the temperatures occurring at the surfaces of the solenoid coils, the European standards EN563 and EN982 need to be adhered to! roject planning information When designing the control with accumulator you have to make sure that the accumulator is protected against inadmissible overpressure by means of a type examination-tested pressure relief valve. he type-examination tested pressure relief valve must not assume control tasks. he set pressure of the type-examination tested pressure relief valve must be less than or equal to the maximum admissible operating pressure of the accumulator. In order to achieve the best utilization of the accumulator volume possible as well as long service life, compliance with the following nitrogen filling pressure value is recommended: p o = 0.9 x p (minimum operating pressure) When attaching the IH15 control to a UE5 drive module, the following has to be observed: he total length of the IH15 control should not be longer than the UE5 drive module. Maximum recommended total length l = 500 mm. lease consult us if the total length of the required control should be longer.
4/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Overview of the modules asic module "G" asic module with integrated pressure relief valve for pressure setting asic module with two valve stations and integrated pressure relief valve if the "G" basic modules are used, no further stacking is possible For more information see page 8 HD 7229 asic module "G" Directional seat valve module, "W", "S" Directional valve modules llow the design of controls using valves with porting pattern according to DIN 24340 form Seat valve modules basically consist of: pressure relief module One or several control modules One end module he control is designed depending on the relevant application For more information see page 14 HD 7223 Directional seat valve module "W", "S" Module for external attachment llows for the attachment of the directional seat valve modules to any hydraulic system or any machine For more information see page 63 HD 7219 Module for external attachment
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 5/96 Overview of the modules Module for drive module UE5 llows for the attachment of the modules to the UE5 drive module (catalog 51145) For more information see page 80 HD 72 Module for drive module UE5 Short designation asic module, type "G" age ank connection module 9 ank connection module with external connection at the front side 9-2 ank connection module with two external 2x and connections at the front side 10 ank connection module with channel 11 GD ressure relief module 12 G2D Module - - with pressure relief valve and 2 valve stations 13 Short designation Directional seat valve module, type "W", "S" age ank connection module 15 ank connection module with external connection at the front side 15 ank connection module with channel 16 ZG ank connection module for sandwich module with threaded connection 77 DF40 ressure filter module ( line p max = 250 bar) 20 DF40 ressure filter module with channel ( line p max = 250 bar) 20 DFS40 ressure filter module filter bowl vertical ( line p max = 250 bar) 21 F30D Filter module with pressure relief valve ( line p max = 7 bar) 22 F30DU Filter module with pressure relief valve and circulation valve ( line p max = 7 bar) 24 F60D Filter module with pressure relief valve ( line p max = 7 bar) 22 F60DU Filter module with pressure relief valve and circulation valve ( line p max = 7 bar) 24 SD ressure cut-off module 28 SD ressure relief module SDU ressure relief module with circulation valve 27 SEDS End module with pressure relief valve, accumulator and stop valve 59 SEDS1 End module with pressure relief valve, accumulator and stop valve with 1 channel 59 S Control module 46 SDV Control module with throttle valve 49 S3 Control module S3 51 S31 Control module S3 with 1 channel 51 S2D Control module S2D 50 S1 Control module with 1 channel 46 SDV1 Control module with throttle valve and 1 channel 49
6/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Overview of the modules Short designation Directional seat valve module, type "W", "S" age SR Control module with check valve 53 SR2 Control module with check valve 55 SR1 Control module with check valve with 1 channel 53 SR21 Control module with check valve with 1 channel 55 S Control module 48 S1 Control module with 1 channel 48 SS ccumulator shut-off module 61 SS1 ccumulator shut-off module with 1 channel 61 SU Circulation module 45 SU1 Circulation module with 1 channel 45 WD ressure relief module with one valve station 17 WDR ressure reducing module 29 WDR1 ressure reducing module with 1 channel 29 WZDR- Sandwich module with pressure reducing valve in channel 31 WZDR-/ Sandwich module with pressure reducing valve in channel and drain cock 31 WZDR- Sandwich module with pressure reducing valve in channel 31 WZDR-/ Sandwich module with pressure reducing valve in channel and drain cock 31 WZDR- Sandwich module with pressure reducing valve in channel 32 WSE Directional seat valve module 58 WSE1 Directional seat valve module with 1 channel 58 WSK Directional valve seat valve cooler module 18 WSK Directional valve seat valve cooler module with bypass 19 WSK Directional valve seat valve cooler module with channel 18 WSK Directional valve seat valve cooler module with channel and bypass 19 WZ Sandwich module (for directional valve size 6) 35 WZ-008 Sandwich module in special design -008 (for directional valve size 6) 39 WZ2 Sandwich module, 2 valve stations, and channel connected (for directional valve size 6) 41 WZ2 Sandwich module, 2 valve stations, channel connected (for directional valve size 6) 41 WZ3 Sandwich module with 3 valve stations (for directional valve size 6) 37 WZ4 Sandwich module with 4 valve stations (for directional valve size 6) 37 WZ4-008 Sandwich module with 4 valve stations in special design -008 (for directional valve size 6) 39 WZE Sandwich module with cartridge valves (for directional valve size 6) 42 WZE1 Sandwich module with cartridge valves with 1 channel (for directional valve size 6) 43 WZG Sandwich module with threaded connection for pipeline installation 78 WZ1 Sandwich module with 1 channel (for directional valve size 6) 35 WZS Sandwich module with lowering brake valve 33 ZSS Sandwich module with accumulator shut-off block 56 ZSS1 Sandwich module with accumulator shut-off module with 1 channel 56
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 7/96 Overview of the modules Short designation Module for external attachment age Connection module 65 D Connection module with through holes 66 D Connection module with pressure relief valve 67 Connection module with channel 65 E End module 72 E1 End module with 1 channel 72 Z Sandwich module 68 ZG Sandwich module with mounting thread for threaded bolt 70 ZG1 Sandwich module with mounting thread for threaded bolt and 1 channel 70 ZG Sandwich module with interruption and mounting thread for threaded bolt 71 ZG1 Sandwich module with 1 interruption and mounting thread for threaded bolt 71 Short designation Reducing module, type "R" age Z Sandwich module with interruption 69 Z1 Sandwich module with 1 channel 68 RIH15 ank connection module with reduction from IH15 to IH15 73 RIH15R Reducing module IH15 to IH15 (right) 75 RIH20L Reducing module IH15 to IH20 (left) 74 RIH20R Reducing module IH15 to IH20 (right) 76 Short designation Module for drive module UE5, type "UE5" age UE5 Connection module 81 UE5R Connection module with check valve 82 UE5 Connection module with channel 81 UE5R Connection module with channel and check valve 82 UE5 ank connection module 83 UE51 ank connection module with 1 channel 83 UE5F30 Filter module ( line p max = 7 bar) 84 UE5F301 Filter module with 1 channel ( line p max = 7 bar) 84 UE5F60 Filter module ( line p max = 7 bar) 84 UE5F601 Filter module with 1 channel ( line p max = 7 bar) 84 UE5SS ccumulator shut-off module 86 UE5SS1 ccumulator shut-off module with 1 channel 86
8/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 asic module, type "G": ttachment
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 9/96 asic module, type "G" (dimensions in mm) ank connection module, type "" Symbol Unit dimensions Dimension Z = 85 mm 122,5 2 18 27 8 124 9,5 41 Z 40 36 8 35 69 85 M8x13 (3x) 82 140 3 x Ø9 Material no. Device designation ype designation R904101347 ank connection module IH15M-1/ ank connection module with connection at the front side, type "" Symbol Unit dimensions Dimension Z = 85 mm 22 42 77,5 122,5 2 33 47 36 124 8 9,5 M8x13 (3x) 82 140 Z 8 69 85 3 x Ø9 Material no. Device designation ype designation ank connection module with external connection at the front side IH15M-1/- R904101844 IH15M-1/-V NR
10/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 asic module, type "G" (dimensions in mm) ank connection module with 2x and connection at the front side, type "-2" Symbol E 63 53 23 Unit dimensions 55 E 12,5 77,5 122,5 124 8 9,5 E 2 21 53 72 8 Z Dimension Z = 85 mm 47 36 50 69 85 82 140 3 x Ø9 M8x13 (3x) Material no. Device designation ype designation ank connection module with 2x external connections at the front side IH15M-1/-2- R901134710 IH15M-1/-2/V NR
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 11/96 asic module, type "G" (dimensions in mm) ank connection module with channel, type "" Symbol Unit dimensions Dimension Z = 85 mm 122,5 2 18 27 8 40 36 124 9,5 41,5 8 34 56 69 85 Z M8x13 (3x) 10,5 81,5 140 3 x Ø9 Material no. Device designation ype designation ank connection module with channel IH15M-1/ R904101843 IH15M-1/
12/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 asic module, type "G" (dimensions in mm) ressure relief module, type "GD" Symbol Unit dimensions Dimension Z = 85 mm M M 177 177 69 69 25 17,5 Z 50 38 35 85 M Material no. Device designation ype designation ressure relief module IH15E-1/GD- 1 2 14 R904101893 IH15E-1/GD-S100/M/V R904101842 IH15E-1/GD-S200/M/V 1 2 14 djustment element at the pressure relief valve ressure rating of the pressure relief valve Setscrew with hexagon and protective cap Rotary knob Lockable rotary knob 25 bar 50 bar 100 bar 200 bar 315 bar 400 bar ressure rating of the type-examination tested pressure relief valve, according to Directive 97/23/EC (ressure Equipment Directive) More pressure ratings on request! Characteristic curve for type-examination tested pressure relief valves type: DD../..E ype testing according to ressure Equipment Directive 97/23/EC With measuring port ressure monitoring Without pressure monitoring 50 bar 100 bar 140 bar 210 bar 330 bar NR = S = H = = 25 = 50 = 100 = 200 = 315 = 400 = 50E = 100E = 140E = 210E = 330E See page 88 = O
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 13/96 asic module, type "G" (dimensions in mm) Module block - -, type "G2D" Symbol M G3/8 G3/8 Unit dimensions Dimension Z = 85 mm 1 2 Ø... M 8 2 1 122,5 124 9,5 2 17 54,5 107 92 179 Z 48 36 M 8 37 50 22,5 82,7 140,, 3 x Ø9 69 85 Material no. Device designation ype designation Module block - - with pressure relief valve IH15E-1/G2D- 1 2 14 27 R904101796 IH15E-1/G2D-S200/M/10/V 1 2 14 27 djustment element at the pressure relief valve ressure rating of the pressure relief valve Setscrew with hexagon and protective cap Rotary knob Lockable rotary knob 25 bar 50 bar 100 bar 200 bar 315 bar 400 bar ressure rating of the type-examination tested pressure relief valve, according to Directive 97/23/EC (ressure Equipment Directive) More pressure ratings on request! Characteristic curve for type-examination tested pressure relief valves type: DD../..E ype testing according to ressure Equipment Directive 97/23/EC With measuring port ressure monitoring Without pressure monitoring Without throttle hrottle hrottle diameter hrottle diameter 50 bar 100 bar 140 bar 210 bar 330 bar NR Ø 1.0 mm Ø 2.5 mm = S = H = = 25 = 50 = 100 = 200 = 315 = 400 = 50E = 100E = 140E = 210E = 330E See page 88 = O = no code = 10 = 25
14/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S": ttachment
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 15/96 Directional seat valve module, type "W", "S" (dimensions in mm) ank connection module, type "" Symbol Unit dimensions Dimension Z = 85 mm 122,5 2 18 27 8 124 9,5 41 Z 40 36 8 35 69 85 M8x13 (3x) 82 140 3 x Ø9 Material no. Device designation ype designation R904101347 ank connection module IH15M-1/ ank connection module with connection at the front side, type "" Symbol Unit dimensions Dimension Z = 85 mm 22 42 77,5 122,5 2 33 47 36 124 8 9,5 M8x13 (3x) 82 140 Z 8 69 85 3 x Ø9 Material no. Device designation ype designation ank connection module with external connection at the front side IH15M-1/- R904101844 IH15M-1/-V NR
16/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) ank connection module with channel, type "" Symbol Unit dimensions Dimension Z = 85 mm 122,5 2 18 27 8 40 36 124 9,5 41,5 8 34 56 69 85 Z M8x13 (3x) 10,5 81,5 140 3 x Ø9 Material no. Device designation ype designation ank connection module with channel IH15M-1/ R904101843 IH15M-1/
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 17/96 Directional seat valve module, type "W", "S" (dimensions in mm) ressure relief module, type "WD" Symbol Unit dimensions Dimension Z = 85 mm M M 87 65 47 G3/8 G3/8 122,5 140 195 2 18 8 124 9,5 8 20 Z 40 36 M 35 50 69 85 82 41 3 x Ø9 Material no. Device designation ype designation ressure relief module 1 2 14 with one valve station IH15E-1/WD- R904101759 IH15E-1/WD-S200/M/V R901042115 IH15E-1/WD-S200/O/V 1 2 14 djustment element at the pressure relief valve ressure rating of the pressure relief valve Setscrew with hexagon and protective cap Rotary knob Lockable rotary knob 25 bar 50 bar 100 bar 200 bar 315 bar 400 bar ressure rating of the type-examination tested pressure relief valve, according to Directive 97/23/EC (ressure Equipment Directive) More pressure ratings on request! Characteristic curve for type-examination tested pressure relief valves type: DD../..E ype testing according to ressure Equipment Directive 97/23/EC With measuring port ressure monitoring Without pressure monitoring 50 bar 100 bar 140 bar 210 bar 330 bar NR = S = H = = 25 = 50 = 100 = 200 = 315 = 400 = 50E = 100E = 140E = 210E = 330E See page 88 = O
18/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) Cooler module, type "WSK" Symbol Unit dimensions Dimension Z = 70 mm 82 67 K K 50 20 K K 86 18 70 52 K K Cooler module with channel, type "WSK" Symbol K K Material no. Device designation ype designation Cooler module IH15M-1/WSK- R904101577 IH15M-1/WSK-V Material no. Device designation ype designation Cooler module with channel IH15M-1/WSK- R904101753 IH15M-1/WSK-V NR
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 19/96 Directional seat valve module, type "W", "S" (dimensions in mm) Cooler module with bypass, type "WSK" (cracking pressure 3 bar) Symbol Unit dimensions Dimension Z = 70 mm K K 50 20 82 67 K K 86 18 70 52 K K Cooler module with channel and bypass, type "WSK" (cracking pressure 3 bar) Symbol K K Material no. Device designation ype designation Cooler module with bypass IH15M-1/WSK- R901165376 IH15M-1/WSK-V Material no. Device designation ype designation Cooler module with channel and bypass IH15M-1/WSK- R901165377 IH15M-1/WSK-V NR
20/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) ressure filter module, type "DF40" (q Vmax = 40 l/min, p max = 250 bar) Symbol Unit dimensions Dimension Z = 213 mm E 52,5 19 58 85 E E ressure filter module with channel, type "DF40" (q Vmax = 40 l/min, p max = 250 bar) Symbol Installation information: Wind the filter cartridge as tight as possible on the block. hen, wind it back by 1/8 to 1/4 of a rotation. E Material no. Device designation ype designation ressure filter module 19 20 (p max = 250 bar) IH15E-1/DF40- R901278451 IH15E-1/DF40-06/E/V R901278454 IH15E-1/DF40-10/E/V Material no. Device designation ype designation ressure filter module with channel 19 20 (p max = 250 bar) IH15E-1/DF40- R901278455 IH15E-1/DF40-06/E/V 19 Filter rating 06 μm 10 μm = 06 = 10 20 Clogging indicator Without clogging indicator Visual clogging indicator Electric clogging indicator NR = = O = E
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 21/96 Directional seat valve module, type "W", "S" (dimensions in mm) ressure filter module for vertical installation position, type "DFS40" (q Vmax = 40 l/min, p max = 250 bar) Symbol Unit dimensions Dimension Z = 70 mm E 85 77 160 38 Z E 46 70 E 45 E 70 50 E E 173 Installation information: Wind the filter cartridge as tight as possible on the block. hen, wind it back by 1/8 to 1/4 of a rotation. Material no. Device designation ype designation ressure filter module for vertical 19 20 installation position (p max = 250 bar) IH15E-1/DFS40- R901278456 IH15E-1/DFS40-10//V R901278457 IH15E-1/DFS40-10/E/V R901278458 IH15E-1/DFS40-10/O/V R901278459 IH15E-1/DFS40-06/E/V 19 Filter rating 06 μm 10 μm = 06 = 10 20 Clogging indicator Without clogging indicator Visual clogging indicator Electric clogging indicator NR = = O = E
22/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) Filter module with pressure relief valve, type "F30D", "F60D" (p max = 7 bar) Filter module with pressure relief valve cannot be directly attached to the UE5 drive module. Symbol Unit dimensions Dimension Z = 180 mm F30D Dimension Z = 290 mm F60D M E 177 82 E 32 36 100 75 E M Installation information: Wind the filter cartridge as tight as possible on the block. hen, wind the filter cartridge by further 1/3 of a rotation. Material no. Device designation ype designation Filter module with pressure relief valve IH15E-1/F30D- 1 2 14 19 20 R901068157 R904101858 R904101859 R901068229 R901068227 R901068228 IH15E-1/F30D-S100/M/10//V IH15E-1/F30D-S100/M/10/E/V IH15E-1/F30D-S100/M/10/O/V IH15E-1/F30D-S100/O/10//V IH15E-1/F30D-S100/O/10/E/V IH15E-1/F30D-S100/O/10/O/V Material no. Device designation ype designation Filter module with pressure relief valve IH15E-1/F60D- 1 2 14 19 20 R901068161 R904101881 R904101880 R901068225 R901068223 R901068224 IH15E-1/F60D-S100/M/10//V IH15E-1/F60D-S100/M/10/E/V IH15E-1/F60D-S100/M/10/O/V IH15E-1/F60D-S100/O/10//V IH15E-1/F60D-S100/O/10/E/V IH15E-1/F60D-S100/O/10/O/V
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 23/96 Directional seat valve module, type "W", "S" 1 2 14 19 20 djustment element at the pressure relief valve ressure rating of the pressure relief valve Setscrew with hexagon and protective cap Rotary knob Lockable rotary knob 25 bar 50 bar 100 bar 200 bar 315 bar 400 bar ressure rating of the type-examination tested pressure relief valve, according to Directive 97/23/EC (ressure Equipment Directive) More pressure ratings on request! Characteristic curve for type-examination tested pressure relief valves type: DD../..E ype testing according to ressure Equipment Directive 97/23/EC With measuring port ressure monitoring Without pressure monitoring 06 μm Filter rating 10 μm Without clogging indicator Clogging indicator Visual clogging indicator Electric clogging indicator 50 bar 100 bar 140 bar 210 bar 330 bar NR = S = H = = 25 = 50 = 100 = 200 = 315 = 400 = 50E = 100E = 140E = 210E = 330E See page 88 = O = 06 = 10 = = O = E
24/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) Filter module with pressure relief valve and circulation valve, type "F30DU", "F60DU" (p max = 7 bar) Filter module with pressure relief valve and circulation valve cannot be directly attached to the UE5 drive module. Symbol Unit dimensions Dimension Z = 180 mm F30DU Dimension Z = 290 mm F60DU M E 197 82 E 32 36 100 75 M Installation information: Wind the filter cartridge as tight as possible on the block. hen, wind the filter cartridge by further 1/3 of a rotation. Material no. Device designation ype designation Filter module with pressure relief valve and circulation valve 1 2 IH15E-1/F30DU- 14 4 8 19 20 R901070590 R904101867 R904101868 R901070591 R904101869 R904101870 IH15E-1/F30DU-S100/MG24/10//V IH15E-1/F30DU-S100/MG24/10/E/V IH15E-1/F30DU-S100/MG24/10/O/V IH15E-1/F30DU-S200/MG24/10//V IH15E-1/F30DU-S200/MG24/10/E/V IH15E-1/F30DU-S200/MG24/10/O/V Material no. Device designation ype designation Filter module with pressure relief valve and circulation valve 1 2 IH15E-1/F60DU- 14 4 8 19 20 R901070592 R904101348 R904101873 R901070593 R904101872 R904101871 IH15E-1/F60DU-S100/MG24/10//V IH15E-1/F60DU-S100/MG24/10/E/V IH15E-1/F60DU-S100/MG24/10/O/V IH15E-1/F60DU-S200/MG24/10//V IH15E-1/F60DU-S200/MG24/10/E/V IH15E-1/F60DU-S200/MG24/10/O/V
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 25/96 Directional seat valve module, type "W", "S" 1 2 4 8 14 19 20 djustment element at the pressure relief valve ressure rating of the pressure relief valve Setscrew with hexagon and protective cap Rotary knob Lockable rotary knob 25 bar 50 bar 100 bar 200 bar 315 bar 400 bar ressure rating of the type-examination tested pressure relief valve, according to Directive 97/23/EC (ressure Equipment Directive) More pressure ratings on request! Characteristic curve for type-examination tested pressure relief valves type: DD../..E ype testing according to ressure Equipment Directive 97/23/EC Normally closed Designation of the 2/2 seat valve Normally open 50 bar 100 bar 140 bar 210 bar 330 bar = S = H = = 25 = 50 = 100 = 200 = 315 = 400 = 50E = 100E = 140E = 210E = 330E See page 88 Solenoid voltage of the seat valves Volt 24 V DC = G24 ressure monitoring Filter rating Clogging indicator With measuring port Without pressure monitoring 06 μm 10 μm Without clogging indicator Visual clogging indicator Electric clogging indicator NR = N = = O = 06 = 10 = = O = E
/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) ressure relief module, type "SD" Symbol Unit dimensions Dimension Z = 85 mm M G3/8 177 70 M 38 54 Material no. Device designation ype designation ressure relief module IH15E-1/SD- 1 2 14 R901065894 IH15E-1/SD-100/M/V R9010657 IH15E-1/SD-100/O/V R901065895 IH15E-1/SD-H100/M/V R9010659 IH15E-1/SD-H100/O/V R901065896 IH15E-1/SD-S100/M/V R904101875 IH15E-1/SD-S100/O/V 1 2 14 djustment element at the pressure relief valve ressure rating of the pressure relief valve Setscrew with hexagon and protective cap Rotary knob Lockable rotary knob 25 bar 50 bar 100 bar 200 bar 315 bar 400 bar ressure rating of the type-examination tested pressure relief valve, according to Directive 97/23/EC (ressure Equipment Directive) More pressure ratings on request! Characteristic curve for type-examination tested pressure relief valves type: DD../..E ype testing according to ressure Equipment Directive 97/23/EC With measuring port ressure monitoring Without pressure monitoring 50 bar 100 bar 140 bar 210 bar 330 bar NR = S = H = = 25 = 50 = 100 = 200 = 315 = 400 = 50E = 100E = 140E = 210E = 330E See page 88 = O
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 27/96 Directional seat valve module, type "W", "S" (dimensions in mm) ressure relief module with circulation valve, type "SDU" Symbol Unit dimensions Dimension Z = 85 mm M 197 a b G3/8 M 38 54 70 Material no. Device designation ype designation ressure relief module with circulation valve IH15E-1/SDU- 1 2 14 4 8 R901039998 R901040000 R901039996 R901089997 R904101825 R904101343 R904101833 R901039995 R904101882 IH15E-1/SDU-200/MG24/V IH15E-1/SDU-200/OG24/V IH15E-1/SDU-H200/MG24/V IH15E-1/SDU-H200/OG24/V IH15E-1/SDU-S50/MG24/V IH15E-1/SDU-S100/MG24/V IH15E-1/SDU-S200/MG24/V IH15E-1/SDU-S200/OG24/V IH15E-1/SDU-S315/MG24/V 1 2 4 8 djustment element at the pressure relief valve ressure rating of the pressure relief valve Setscrew with hexagon and protective cap Rotary knob Lockable rotary knob 25 bar 50 bar 100 bar 200 bar 315 bar 400 bar ressure rating of the type-examination tested pressure relief valve, according to Directive 97/23/EC (ressure Equipment Directive) More pressure ratings on request! Characteristic curve for type-examination tested pressure relief valves type: DD../..E ype testing according to ressure Equipment Directive 97/23/EC Normally closed Designation of the 2/2 seat valve Normally open 50 bar 100 bar 140 bar 210 bar 330 bar = S = H = = 25 = 50 = 100 = 200 = 315 = 400 = 50E = 100E = 140E = 210E = 330E See page 88 Solenoid voltage of the seat valves Volt 24 V DC = G24 = N = 14 ressure monitoring With measuring port Without pressure monitoring = O NR
28/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) ressure cut-off module, type "SD" Symbol Unit dimensions Dimension Z = 95 mm M 206 130 50 Material no. Device designation ype designation 23 24 14 ressure cut-off module IH15E-2/SD- R901152738 IH15E-2/SD-2/K/M/V 14 23 24 ressure monitoring With measuring port Without pressure monitoring djustment type Hexagon with protective cap = 2 ressure rating of the pressure cut-off valve 50 bar 100 bar 200 bar 350 bar NR = O = C = F = K = R
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 29/96 Directional seat valve module, type "W", "S" (dimensions in mm) ressure reducing module, type "WDR" Symbol Unit dimensions Dimension Z = 120 mm M 206 1 50 () M ressure reducing module with 1 channel, type "WDR1" Symbol M 1 () M Material no. Device designation ype designation ressure reducing module IH15M-1/WDR- 16 17 R901066169 IH15M-1/WDR-1/210/M/V R901066168 IH15M-1/WDR-1/210/O/V R904101852 IH15M-1/WDR-2/75/M/V R904102085 IH15M-1/WDR-2/75/O/V R904101559 IH15M-1/WDR-2/150/M/V R904101853 IH15M-1/WDR-2/210/M/V R904101854 IH15M-1/WDR-2/315/M/V R901066167 IH15M-1/WDR-3/210/M/V R901066166 IH15M-1/WDR-3/210/O/V R901066165 IH15M-1/WDR-7/210/M/V R901066164 IH15M-1/WDR-7/210/O/V 14
30/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" Material no. Device designation ype designation R904101755 R901067481 R904101636 R901067480 R904101855 R901067478 R901067482 R901067483 R901067485 R901067486 ressure reducing module with 1 channel IH15M-1/WDR1-16 17 IH15M-1/WDR1-1/150/M/V IH15M-1/WDR1-1/150/O/V IH15M-1/WDR1-2/75/M/V IH15M-1/WDR1-2/75/O/V IH15M-1/WDR1-2/150/M/V IH15M-1/WDR1-2/150/O/V IH15M-1/WDR1-3/210/M/V IH15M-1/WDR1-3/210/O/V IH15M-1/WDR1-7/210/M/V IH15M-1/WDR1-7/210/O/V 14 14 ressure monitoring With measuring port Without pressure monitoring = O 16 17 djustment element at the pressure reducing valve Secondary pressure Rotary knob Setscrew with hexagon and protective cap Lockable rotary knob with scale Rotary knob with scale Max. secondary pressure Max. secondary pressure Max. secondary pressure Max. secondary pressure Max. secondary pressure 25 bar 75 bar 150 bar 210 bar 315 bar NR = 1 = 2 = 3 = 7 = 25 = 75 = 150 = 210 = 315
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 31/96 Directional seat valve module, type "W", "S" (dimensions in mm) Sandwich module with pressure reducing valve in channel, type "WZDR-" Symbol Unit dimensions Dimension Z = 95 mm M M G3/8 G3/8 M Sandwich module with pressure reducing valve in channel and drain cock, type "WZDR-/" Symbol Unit dimensions Dimension Z = 145 mm M G3/8 G3/8 M 233 M M 17 56 90 2 233 M 17 56 90 1 Sandwich module with pressure reducing valve in channel, type "WZDR-" Symbol Unit dimensions Dimension Z = 155 mm M G3/8 G3/8 M M 2 233 M 17 56 90 1 Sandwich module with pressure reducing valve in channel and drain cock, type "WZDR-/" Symbol Unit dimensions Dimension Z = 205 mm M G3/8 G3/8 M M 2 233 M 17 56 90 1 2 1
32/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) Sandwich module with pressure reducing valve in channel, type "WZDR-" Symbol Unit dimensions Dimension Z = 95 mm M G3/8 G3/8 M M 90 233 15 64 Material no. Device designation ype designation Sandwich module with pressure reducing valve IH15E-1/WZDR- 29 32 33 34 14 R904102218 R904102219 R901040102 R901063736 R904101639 R904102089 R901024724 R904101807 R901110142 R901110143 IH15E-1/WZDR-/2/100/M/V IH15E-1/WZDR-/2/100D/M/V IH15E-1/WZDR-/2/210/M/V IH15E-1/WZDR-/2/210D/M/V IH15E-1/WZDR-/2/100/M/V IH15E-1/WZDR-/2/100D/M/V IH15E-1/WZDR-/2/210D/M/V IH15E-1/WZDR-/2/315/M/V IH15E-1/WZDR-/2/210/M/V IH15E-1/WZDR-/2/210D/M/V 14 ressure monitoring With measuring port Without pressure monitoring = O NR 29 Cartridge valve In channel In channel and In channel = = = 32 Stop valve Without stop valve With stop valve = no code = 33 djustment element at the pressure reducing valve Setscrew with hexagon and protective cap Rotary knob with scale, lockable = 2 = 3 34 Secondary pressure Max. secondary pressure Max. secondary pressure Max. secondary pressure Max. secondary pressure with pressure switch Max. secondary pressure with pressure switch Max. secondary pressure with pressure switch 100 bar 210 bar 315 bar 100 bar 210 bar 315 bar = 100 = 210 = 315 = 100D = 210D = 315D
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 33/96 Directional seat valve module, type "W", "S" (dimensions in mm) Sandwich module with lowering brake valve in channel, type "WZS-" Symbol Unit dimensions Dimension Z = 110 mm M G3/8 G3/8 M 95 31 69 255 a Sandwich module with lowering brake valve in channel, type "WZS-" Symbol Unit dimensions Dimension Z = 110 mm M G3/8 G3/8 M 95 255 31 a Sandwich module with lowering brake valve in channel and, type "WZS-" Symbol Unit dimensions Dimension Z = 110 mm M G3/8 G3/8 M 95 255 31 69 a a
34/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type: "W", "S" Material no. Device designation ype designation R901160333 Sandwich module with lowering brake valve IH15E-1/WZS- IH15E-1/WZS-/MNG24/V 29 14 4 8 4 8 14 29 Designation of the 2/2 seat valve Normally closed Normally open Solenoid voltage of the seat valves Volt 24 V DC = G24 ressure monitoring Cartridge valve With measuring port Without pressure monitoring In channel In channel In channel and NR = N = = O = = =
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 35/96 Directional seat valve module, type "W", "S" (dimensions in mm) Sandwich module, type "WZ" Symbol Unit dimensions Dimension Z = 70 mm without check valve M M G3/8 G3/8 Dimension Z = 85 mm M with check valve IH15M-1/WZ-... M 17 50 33 M G3/8 G3/8 M M G3/8 G3/8 M M G3/8 G3/8 M IH15M-1/WZ-/... IH15M-1/WZ-/... IH15M-1/WZ-/... Sandwich module with 1 channel, type "WZ1" Symbol M G3/8 G3/8 M M G3/8 G3/8 M M G3/8 G3/8 M 1 IH15M-1/WZ1-... 1 IH15M-1/WZ1-/... 1 IH15M-1/WZ1-/... M G3/8 G3/8 M 1 IH15M-1/WZ1-/... Material no. Device designation ype designation Sandwich module IH15M-1/WZ- 21 14 R904101345 IH15M-1/WZ-M/V R904101410 IH15M-1/WZ-O/V R901067488 IH15M-1/WZ-/M/V R901067489 IH15M-1/WZ-/O/V R901067490 IH15M-1/WZ-/M/V R901067491 IH15M-1/WZ-/O/V R901065897 IH15M-1/WZ-/M/V R904101455 IH15M-1/WZ-/O/V
36/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" Material no. Device designation ype designation R904101830 R904101598 R901067493 R901067495 R901067497 R904101756 R901067498 R901067499 Sandwich module with 1 channel IH15M-1/WZ1-21 14 IH15M-1/WZ1-M/V IH15M-1/WZ1-O/V IH15M-1/WZ1-/M/V IH15M-1/WZ1-/O/V IH15M-1/WZ1-/M/V IH15M-1/WZ1-/O/V IH15M-1/WZ1-/M/V IH15M-1/WZ1-/O/V 14 ressure monitoring With measuring port Without pressure monitoring = O 21 Check valve Without check valve In channel In channel In channel and NR = no code = = =
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 37/96 Directional seat valve module, type "W", "S" (dimensions in mm) Sandwich module with 3 valve stations, type "WZ3" Symbol Unit dimensions Dimension Z = 70 mm M G3/8 G3/8 M M G3/8 G3/8 M M G3/8 G3/8 M M M M M M M 33 67 83 117 133 150 17 Sandwich module with 4 valve stations, type "WZ4" Symbol Unit dimensions Dimension Z = 70 mm M G3/8 G3/8 M M G3/8 G3/8 M M G3/8 G3/8 M M G3/8 G3/8 M M M M M M M M M 33 17 67 83 117 133 167 183 200
38/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" Material no. Device designation ype designation Sandwich module, 3 valve stations IH15M-1/WZ3-14 R901096707 IH15E-1/WZ3-M/V R901096708 IH15E-1/WZ3-O/V Material no. Device designation ype designation Sandwich module, 4 valve stations IH15M-1/WZ4-14 R901090430 IH15E-1/WZ4-M/V R901096706 IH15E-1/WZ4-O/V 14 ressure monitoring With measuring port Without pressure monitoring = O NR
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 39/96 Directional seat valve module, type "W", "S" (dimensions in mm) Sandwich module in special design -008 (outlets and 2x G3/8 each), type "WZ- -008" Symbol Unit dimensions Dimension Z = 70 mm G3/8 G3/8 G3/8 G3/8 33 33 50 G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 67 83 33 17 117 133 167 183 200 33 19 19 17 Sandwich module with 4 valve stations in special design -008 (outlets and 2x G3/8 each), type "WZ4- -008" Symbol Unit dimensions Dimension Z = 70 mm 183 169 133 119 83 69
40/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" Material no. Device designation ype designation R901128760 R901125893 Sandwich module in special design -008, 1 valve station 14 IH15M-1/WZ- -008 IH15M-1/WZ-M/V-008 IH15M-1/WZ-O/V-008 Material no. Device designation ype designation R901128761 R901125863 Sandwich module in special design -008, 4 valve stations 14 IH15M-1/WZ4- -008 IH15M-1/WZ4-M/V-008 IH15M-1/WZ4-O/V-008 14 ressure monitoring With measuring port Without pressure monitoring = O NR
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 41/96 Directional seat valve module, type "W", "S" (dimensions in mm) Sandwich module 2 - -, type "WZ2" Symbol Unit dimensions Dimension Z = 70 mm M G3/8 G3/8 M 1 2 M M 2 1 33 100 17 14 ressure monitoring With measuring port Without pressure monitoring = O NR Sandwich module 2 -, type "WZ2" Symbol Unit dimensions Dimension Z = 70 mm M1 1 1 G3/8 G3/8 M1 M2 2 2 G3/8 G3/8 1 2 M2 M2 M2 M1 M1 2 1 2 2 1 1 33 67 83 100 17 Material no. Device designation ype designation Sandwich module, 2 valve stations, 14 - channel connected IH15M-1/WZ2- R904101364 IH15M-1/WZ2-M/V R904101411 IH15M-1/WZ2-O/V Material no. Device designation ype designation Sandwich module, 2 valve stations, 14 - channel connected IH15M-1/WZ2- R901094521 IH15M-1/WZ2-M/V R901094520 IH15M-1/WZ2-O/V 14 ressure monitoring With measuring port Without pressure monitoring = O NR
42/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) Sandwich module with cartridge valves, type "WZE" Symbol Unit dimensions Dimension Z = 110 mm M G3/8 G3/8 M 181 162 M 80 59 M 21 IH15E-1/WZE-FSR/... M G3/8 G3/8 M M G3/8 G3/8 M M G3/8 G3/8 M IH15E-1/WZE-FS/... IH15E-1/WZE-R/... IH15E-1/WZE-FSR/... M G3/8 G3/8 M M G3/8 G3/8 M M G3/8 G3/8 M IH15E-1/WZE-FSR/... IH15E-1/WZE-FS/... IH15E-1/WZE-FS/... M G3/8 G3/8 M M G3/8 G3/8 M IH15E-1/WZE-R/... IH15E-1/WZE-R/...
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 43/96 Directional seat valve module, type "W", "S" (dimensions in mm) Sandwich module with cartridge valves, type "WZE1" Symbol M G3/8 G3/8 M M G3/8 G3/8 M M G3/8 G3/8 M 1 1 1 IH15E-1/WZE1-FSR/... IH15E-1/WZE1-FS/... IH15E-1/WZE1-R/... M G3/8 G3/8 M M G3/8 G3/8 M M G3/8 G3/8 M 1 1 1 IH15E-1/WZE1-FSR/... IH15E-1/WZE1-FSR/... IH15E-1/WZE1-FS/... M G3/8 G3/8 M M G3/8 G3/8 M M G3/8 G3/8 M 1 1 1 IH15E-1/WZE1-FS/... IH15E-1/WZE1-R/... IH15E-1/WZE1-R/... Material no. Device designation ype designation Sandwich module 28 29 with cartridge valves IH15E-1/WZE- R904101344 IH15E-1/WZE-FSR//M/V R901067578 IH15E-1/WZE-FSR//O/V R901067579 IH15E-1/WZE-FS//M/V R901067580 IH15E-1/WZE-FS//O/V R901067581 IH15E-1/WZE-R//M/V R901067582 IH15E-1/WZE-R//O/V 14
44/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" Material no. Device designation ype designation R901067583 R901067584 R901067585 R901067586 R901067587 R901067675 Sandwich module with cartridge valves and 1 channel IH15E-1/WZE1-28 29 IH15E-1/WZE1-FSR//M/V IH15E-1/WZE1-FSR//O/V IH15E-1/WZE1-FS//M/V IH15E-1/WZE1-FS//O/V IH15E-1/WZE1-R//M/V IH15E-1/WZE1-R//O/V 14 14 ressure monitoring With measuring port Without pressure monitoring = O NR 28 29 Cartridge valve Cartridge valve djustable throttle check valve ilot operated check valve djustable throttle check valve and pilot operated check valve In channel In channel In channel and = FS = R = FSR = = =
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 45/96 Directional seat valve module, type "W", "S" (dimensions in mm) Circulation module, type "SU" Symbol Unit dimensions Dimension Z = 70 mm 197 a 50 b Circulation module with 1 channel, type "SU1" Symbol a 1 b R904101894 R904101895 IH15E-1/SU-NG24/V IH15E-1/SU-G24/V Material no. Device designation ype designation Circulation module with 1 channel Material no. Device designation ype designation 4 8 Circulation module IH15E-1/SU- IH15E-1/SU1-4 8 R904101896 R904101897 IH15E-1/SU1-NG24/V IH15E-1/SU1-G24/V 4 8 Designation of the 2/2 seat valve Normally closed Normally open Solenoid voltage of the seat valves Volt 24 V DC = G24 = N = NR
46/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) Module, type "S" Symbol Unit dimensions Dimension Z = 70 mm Module with 1 channel, type "S1" Symbol Unit dimensions Dimension Z = 70 mm 20 20 IH15E-1/S -V -M 197 a 50 b -N... IH15E-1/S -... 1 IH15E-1/S1 -V -M 197 a 50 1 b IH15E-1/S1 -N... -...
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 47/96 Directional seat valve module, type "W", "S" Material no. Device designation ype designation Control module with 1 channel IH15E-1/S1-4 8 R904101899 IH15E-1/S1-NG24/V R904101900 IH15E-1/S1-G24/V Material no. Device designation ype designation Control module with 1 channel IH15E-1/S1- R901070019 IH15E-1/S1/V Material no. Device designation ype designation Control module IH15E-1/S- R904101760 IH15E-1/S/V Material no. Device designation ype designation Control module IH15E-1/S- 4 8 R904101795 IH15E-1/S-NG24/V R904101898 IH15E-1/S-G24/V 4 8 Designation of the 2/2 seat valve Normally closed Normally open Solenoid voltage of the seat valves Volt 24 V DC = G24 NR = N =
48/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) Module, type "S" Symbol Unit dimensions Dimension Z = 70 mm IH15E-1/S -V -M Module with 1 channel, type "S1" Symbol Unit dimensions Dimension Z = 70 mm 20 20 1 IH15E-1/S1 -V -M Material no. Device designation ype designation Control module IH15E-1/S- R9013003 IH15E-1/S/V Material no. Device designation ype designation Control module with 1 channel IH15E-1/S1- R9013002 IH15E-1/S1/V NR
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 49/96 Directional seat valve module, type "W", "S" (dimensions in mm) Module DV, type "SDV" Symbol Unit dimensions Dimension Z = 70 mm 157 50 Module DV with 1 channel, type "SDV1" Symbol 1 Material no. Device designation ype designation Control module with throttle valve IH15M-1/SDV - R901215052 IH15M-1/SDV -V Material no. Device designation ype designation Control module with throttle valve and 1 channel IH15M-1/SDV1 - R901300246 IH15M-1/SDV1 - V NR
50/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "S" (dimensions in mm) Module - - - with pressure relief valve, type "S2D" Symbol Unit dimensions Dimension Z = 85 mm G3/8 G3/8 M 197 a M 19 40 70 b Material no. Device designation ype designation 1 2 14 4 8 Module S2D IH15E-1/S2D- R901168798 IH15E-1/S2D-S315/OG24/V 1 2 4 8 14 djustment element at the pressure relief valve ressure rating of the pressure relief valve Setscrew with internal hexagon Rotary knob 25 bar 50 bar 100 bar 200 bar 350 bar 500 bar ressure rating of the type-examination tested pressure relief valve, according to Directive 97/23/EC (ressure Equipment Directive) More pressure ratings on request! Characteristic curve for type-examination tested pressure relief valves type: DD 6../..E ype testing according to ressure Equipment Directive 97/23/EC Normally closed Designation of the 2/2 seat valve Normally open 50 bar 100 bar 140 bar 210 bar 330 bar = S = H = 25 = 50 = 100 = 200 = 350 = 500 = 50E = 100E = 140E = 210E = 330E See page 88 Solenoid voltage of the seat valves Volt 24 V DC = G24 ressure monitoring With measuring port Without pressure monitoring = N = = O
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 51/96 Directional seat valve module, type "W", "S" (dimensions in mm) Module -, type "S3" Symbol M G3/8 Unit dimensions 197 Dimension Z = 70 mm a M 50 33 b Module - with 1 channel, type "S31" Symbol M G3/8 a 1 b Material no. Device designation ype designation IH15E-1/S3- Control module - 5 14 8 27 R901019899 R904101901 R901070054 R904101902 IH15E-1/S3-C/MG24/V IH15E-1/S3-C/OG24/V IH15E-1/S3-U/MG24/V IH15E-1/S3-U/OG24/V Material no. Device designation ype designation Control module - with 1 channel IH15E-1/S31-5 14 8 27 R901070056 R901070058 R901070059 R901070060 IH15E-1/S31-C/MG24/V IH15E-1/S31-C/OG24/V IH15E-1/S31-U/MG24/V IH15E-1/S31-U/OG24/V
52/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" 5 Designation of the 3/2 seat valve = U = C 8 14 27 Solenoid voltage of the seat valves Volt 24 V DC = G24 ressure monitoring hrottle With measuring port Without pressure monitoring Without throttle hrottle diameter hrottle diameter NR Ø 1.0 mm Ø 2.5 mm = O = no code = 10 = 25
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 53/96 Directional seat valve module, type "W", "S" (dimensions in mm) Module with check valve, type "SR" Symbol Unit dimensions Dimension Z = 70 mm M M M M 30 50 Module with check valve and 1 channel, type "SR1" Symbol M M M 1 1 1 Material no. Device designation ype designation Control module 21 14 with check valve IH15E-1/SR - R901070301 IH15E-1/SR-/M/V R904101888 IH15E-1/SR-/O/V R901065236 IH15E-1/SR-/M/V R904101558 IH15E-1/SR-/O/V R901070303 IH15E-1/SR-/M/V R904101596 IH15E-1/SR-/O/V Material no. Device designation ype designation Control module with check valve 21 14 and 1 channel IH15E-1/SR1- R901070304 IH15E-1/SR1-/M/V R904101892 IH15E-1/SR1-/O/V R901070305 IH15E-1/SR1-/M/V R904101889 IH15E-1/SR1-/O/V R901070306 IH15E-1/SR1-/M/V R904101890 IH15E-1/SR1-/O/V
54/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" 14 ressure monitoring With measuring port Without pressure monitoring = O 21 Check valve Without check valve In channel In channel In channel and NR = no code = = =
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 55/96 Directional seat valve module, type "W", "S" (dimensions in mm) Module with check valve, type "SR2" Symbol Unit dimensions Dimension Z = 70 mm M E M E 30 M E 25 50 Module with check valve and 1 channel, type "SR21" Symbol M E M E 1 1 Material no. Device designation ype designation Control module 21 14 with check valve IH15E-1/SR2 - R901140077 IH15E-1/SR2-/O/V Material no. Device designation ype designation Control module with check valve 21 14 and 1 channel IH15E-1/SR21- R901300658 IH15E-1/SR21-/O/V 14 ressure monitoring With measuring port Without pressure monitoring = O 21 Check valve Without check valve In channel In channel In channel and = no code = = = NR
56/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) roject planning information When designing the control with accumulator you have to make sure that the accumulator is protected against inadmissible overpressure by means of a type examination-tested pressure relief valve. he type-examination tested pressure relief valve must not accept any control tasks. he set pressure of the type-examination tested pressure relief valve must be less than or equal to the maximum admissible operating pressure of the accumulator. In order to achieve the best utilization of the accumulator volume possible as well as long service life, compliance with the following nitrogen filling pressure value is recommended: p o = 0.9 x p (minimum operating pressure) Mounting information he accumulators is to be fastened so that in case of operational vibrations, safe hold is guaranteed. No holding forces may be applied via the oil and gas connection. Sandwich module with accumulator shut-off module, type "ZSS" Symbol Unit dimensions Dimension Z = max. 295 mm S M1 M2 M33x2 177 52,5 2 85 1 2 1 M1 S M2 170 Sandwich module with accumulator shut-off module and 1 channel, type "ZSS1" Symbol S M1 M2 M33x2 2 1 1 Operating information: 1 System stop valve must be open in the operating condition 2 Manual unloading must be closed in the operating condition
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 57/96 Directional seat valve module, type "W", "S" Material no. Device designation ype designation Sandwich module with accumulator shut-off module 1 3 IH15E-1/ZSS- 31 14 8 18 R904101904 R904101903 R904102293 IH15E-1/ZSS-S140E/E/MG24/1,40/V IH15E-1/ZSS-S140E/M/M/1,40/V IH15E-1/ZSS-S140E/M/M/2,00/V Material no. Device designation ype designation Sandwich module with accumulator shut-off module and 1 channel 1 3 IH15E-1/ZSS1-31 14 8 18 R904101906 R904101905 IH15E-1/ZSS1-S140E/E/MG24/1,40/V IH15E-1/ZSS1-S140E/M/M/1,40/V 1 3 8 14 18 31 djustment element at the pressure relief valve Setscrew with hexagon and protective cap Rotary knob Lockable rotary knob ressure rating of the type-examination tested pressure relief valve, according to Directive 97/23/EC (ressure Equipment Directive) More pressure ratings on request! Characteristic curve for type-examination tested pressure relief valves type: DD../..E ype testing according to ressure Equipment Directive 97/23/EC 50 bar 100 bar 140 bar 210 bar 330 bar = S = H = = 50E = 100E = 140E = 210E = 330E See page 89 Solenoid voltage of the seat valves Volt 24 V DC = G24 ressure monitoring With measuring port Without pressure monitoring Diaphragm-type accumulator Nominal volume in l 0.35 0.50 0.70 0.70 1.40 1.40 2.00 2.80 3.50 ladder-type accumulator 0.50 4.00 Manual Unloading Manual and electromagnetic Max. pressure in bar 210 210 210 350 140 350 350 350 350 400 330 NR = O = 0.35 = 0.50 = 0.70 = 0.70 = 1.40 = 1.40 = 2.00 = 2.80 = 3.50 = 0.50 = 4.00 = E
58/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" (dimensions in mm) End module, type "WSE" End module with 1 channel, Symbol type "WSE1" Unit dimensions Dimension Z = 70 mm Symbol Ø9 M M 1 M1 M M M M 97 22 30 IH15M-1/WSE... IH15M-1/WSE1... G3/4 IH15M-1/WSE-... 1 G3/4 IH15M-1/WSE1-... 50 IH15M-1/WSE1- Material no. Device designation ype designation End module IH15M-1/WSE- 22 14 R904101349 IH15M-1/WSE-M/V R904101555 IH15M-1/WSE-O/V R904101793 IH15M-1/WSE-/M/V R904101857 IH15M-1/WSE-/O/V Material no. Device designation ype designation R904101599 R901067146 R901070307 R901070308 End module with 1 channel IH15M-1/WSE1-M/V IH15M-1/WSE1-O/V IH15M-1/WSE1-/M/V IH15M-1/WSE1-/O/V 22 14 14 ressure monitoring With measuring port Without pressure monitoring = O 22 orts Without ports and = no code = NR
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 59/96 Directional seat valve module, type "W", "S" (dimensions in mm) roject planning information When designing the control with accumulator you have to make sure that the accumulator is protected against inadmissible overpressure by means of a type examination-tested pressure relief valve. he type-examination tested pressure relief valve must not accept any control tasks. he set pressure of the type-examination tested pressure relief valve must be less than or equal to the maximum admissible operating pressure of the accumulator. In order to achieve the best utilization of the accumulator volume possible as well as long service life, compliance with the following nitrogen filling pressure value is recommended: p o = 0.9 x p (minimum operating pressure) Mounting information he accumulators is to be fastened so that in case of operational vibrations, safe hold is guaranteed. No holding forces may be applied via the oil and gas connection. End module with pressure relief valve, accumulator and stop valve, type "SEDS" Symbol Unit dimensions Dimension Z = max 120 mm M33x2 M max 301 M 50 End module with pressure relief valve, accumulator, stop valve and 1 channel, type "SEDS1" Symbol 177 50 M33x2 M 1
60/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" Material no. Device designation ype designation End module with pressure relief valve, accumulator and stop valve IH15E-1/SEDS- 1 3 14 18 R904102091 R904101415 IH15E-1/SEDS-S100/M/0,70/V IH15E-1/SEDS-S100/M/1,40/V Material no. Device designation ype designation End module with pressure relief valve, accumulator, stop valve and 1 channel IH15E-1/SEDS1-1 3 14 18 R904101886 IH15E-1/SEDS1-S100/M/1,40/V 1 3 14 18 djustment element at the pressure relief valve Setscrew with hexagon and protective cap Rotary knob Lockable rotary knob ressure rating of the type-examination tested pressure relief valve, according to Directive 97/23/EC (ressure Equipment Directive) More pressure ratings on request! Characteristic curve for type-examination tested pressure relief valves type: DD../..E ype testing according to ressure Equipment Directive 97/23/EC With measuring port ressure monitoring Without pressure monitoring Diaphragm-type accumulator Nominal volume in l 0.35 0.50 0.70 0.70 1.40 1.40 2.00 2.80 3.50 ladder-type accumulator 0.50 4.00 50 bar 100 bar 140 bar 210 bar 330 bar Max. pressure in bar 210 210 210 350 140 350 350 350 350 400 330 NR = S = H = = 50E = 100E = 140E = 210E = 330E See page 89 = O = 0.35 = 0.50 = 0.70 = 0.70 = 1.40 = 1.40 = 2.00 = 2.80 = 3.50 = 0.50 = 4.00
RE 51156/05.13 IH15 Hydraulics osch Rexroth G 61/96 Directional seat valve module, type "W", "S" (dimensions in mm) roject planning information When designing the control with accumulator you have to make sure that the accumulator is protected against inadmissible overpressure by means of a type examination-tested pressure relief valve. he type-examination tested pressure relief valve must not accept any control tasks. he set pressure of the type-examination tested pressure relief valve must be less than or equal to the maximum admissible operating pressure of the accumulator. In order to achieve the best utilization of the accumulator volume possible as well as long service life, compliance with the following nitrogen filling pressure value is recommended: p o = 0.9 x p (minimum operating pressure) Mounting information he accumulators is to be fastened so that in case of operational vibrations, safe hold is guaranteed. No holding forces may be applied via the oil and gas connection. ccumulator shut-off module, type "SS" Symbol Unit dimensions Dimension Z = 172 mm S M1 M2 M33x2 2 1 2 1 max 361 ccumulator shut-off module with 1 channel, type "SS1" Symbol S 110 S M1 M2 M33x2 M2(M1) 2 1 177 52,5 1 Operating information: 1 System stop valve must be open in the operating condition 2 Manual unloading must be closed in the operating condition Material no. Device designation ype designation IH15E-1/SS- ccumulator shut-off module 1 3 31 14 8 18 R904101840 R901044115 R904101848 R901066444 R901039971 R901070594 IH15E-1/SS-S140E/E/MG24/1,40/V IH15E-1/SS-S140E/E/OG24/1,40/V IH15E-1/SS-S140E/M/M/1,40/V IH15E-1/SS-S140E/M/O/1,40/V IH15E-1/SS-S330E/M/M/0,50/V IH15E-1/SS-S330E/M/O/0,50/V
62/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Directional seat valve module, type "W", "S" Material no. Device designation ype designation ccumulator shut-off module with 1 channel IH15E-1/SS1-1 3 31 14 8 18 R904101846 R901070596 R904101845 R901070597 IH15E-1/SS1-S140E/E/MG24/1,40/V IH15E-1/SS1-S140E/E/OG24/1,40/V IH15E-1/SS1-S140E/M/M/1,40/V IH15E-1/SS1-S140E/M/O/1,40/V 1 3 8 14 18 31 djustment element at the pressure relief valve Setscrew with hexagon and protective cap Rotary knob Lockable rotary knob ressure rating of the type-examination tested pressure relief valve, according to Directive 97/23/EC (ressure Equipment Directive) More pressure ratings on request! Characteristic curve for type-examination tested pressure relief valves type: DD../..E ype testing according to ressure Equipment Directive 97/23/EC 50 bar 100 bar 140 bar 210 bar 330 bar = S = H = = 50E = 100E = 140E = 210E = 330E See page 89 Solenoid voltage of the seat valves Volt 24 V DC = G24 ressure monitoring With measuring port Without pressure monitoring Diaphragm-type accumulator Nominal volume in l 0.35 0.50 0.70 0.70 1.40 1.40 2.00 2.80 3.50 ladder-type accumulator 0.50 4.00 Manual Unloading Manual and electromagnetic Max. pressure in bar 210 210 210 350 140 350 350 350 350 400 330 NR = O = 0.35 = 0.50 = 0.70 = 0.70 = 1.40 = 1.40 = 2.00 = 2.80 = 3.50 = 0.50 = 4.00 = E
M G3/4 1 3 2 M M M M M G3/8 G3/8 G3/8 G3/8 M G3/8 E RE 51156/05.13 IH15 Hydraulics osch Rexroth G 63/96 Module for external attachment: ttachment with application examples 1 Connection module type or connection module with through bore type D (see page 65 and 66) 5 Sandwich module type ZG and ZG (see page 70 and 71) he sandwich module with mounting thread can be combined with the connection module item 1 type D and with the end module item 3 type E. It can, however, not be combined with the connection module type and D. he length dimensions are calculated by adding dimension "" of the directional valve modules (see page 14 to 62) 1 roject planning information When designing the control with accumulator you have to make sure that the accumulator is protected against inadmissible overpressure by means of a type examination-tested pressure relief valve. he type-examination tested pressure relief valve must not accept any control tasks. he set pressure of the type-examination tested pressure relief valve must be less than or equal to the maximum admissible operating pressure of the accumulator. In order to achieve the best utilization of the accumulator volume possible as well as long service life, compliance with the following nitrogen filling pressure value is recommended: p o = 0.9 x p (minimum operating pressure) 5 Mounting information he accumulators is to be fastened so that in case of operational vibrations, safe hold is guaranteed. No holding forces may be applied via the oil and gas connection. G3/8 a a b b a b a b M G3/8 a b M33x2 M
M G3/4 M M M M M M G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 G3/4 2 2 a b M 1 a b M 1 a b M M G3/8 G3/8 a b M M M M M M G3/8 G3/8 G3/8 G3/8 G3/8 G3/8 2 a b a b M 1 a b M G3/8 G3/4 a b 64/96 osch Rexroth G Hydraulics IH15 RE 51156/05.13 Module for external attachment: ttachment with application examples 2 Connection module with pressure relief valve type D (see page 67) 3 End module type E (see page 72) 4 Sandwich module type Z or Z (see page 68 and 69) he sandwich module can also be combined with the connection module item 1 type or item 2 type D and with the end module item 3. he length dimensions are calculated by adding dimension "" of the directional valve modules (see page 14 to 62) 2 4 3