Issue Date: May 2018 Fixture/Location Ref: Project Ref: ProSpex 3.5 Axis Twin Axis Twin Trimless Downlight The ProSpex 3.5 Axis multi forms part of our architecturally designed range of Trim and Trimless adjustable downlights. The range also includes two snoot variants, short tapered and long straight, available for MR16 sized light sources including Lucent s own LED50 series of modules. Housing Mounting Tray Product Description Mud in kit for seamless flush finish Die cast aluminium bodies 1.60 (40mm) diameter aperture 35 tilt and 359 rotation Spaced at 10 o.c.(254mm) Tapered or straight snoot options Deep regressed lamp position for minimal glare Cutout (C): 2x Ø4.17 (106mm) White or matte black finish as standard Easy rotation and re-lamping with ball catch mechanism O.C. Height L L1 W W1 10.00 (254mm) 4.14 (105mm) 20.60 (524mm) 25.15 (639mm) 12.00 (305mm) 14.45 (369mm) To specify the fixture, LED module and installation kit/housing as follow: 1) Specify the housing and control protocol 2) Specify fixture type and LED type Copyright 2014 Lucent Lighting Inc. Tel. New York: +1 518 239 8300 Page 01
Please specify either Housing or Tray order code depending on your requirements Housing Order Code: LH-M2-8.50 Height LH-M2-8.50 8 1/2 Twin Housing Housing Type IC Insulated Ceiling AT Airtight Ceiling, CCEA NIC Non-Insulated Ceiling Mounting Hardware 14 14 to 24 BB Butterfly Bracket CB Caterpillar Bracket Supply Voltage 120 120V 277 277V Protocol S Switched P TRAIC/Phase (120V ONLY) LP Lutron Forward Phase 2-Wire (120V ONLY) ESS EcoSystem 5-Series 5% LHE EcoSystem Hi-lum 1% Fade to Black LAE Lutron 3-Wire Hi-Lume 1% A Analog ED EldoLED DALI EA EldoLED Analog Tray Order Code: Tray Size M2 Housing Type NIC Twin Tray LMT Non-Insulated Ceiling Mounting Hardware 09 9 to 15.25 14 14 to 24 M2 NIC Supply Voltage 120 120V 277 277V Protocol S Switched P TRAIC/Phase (120V ONLY) LP Lutron Forward Phase 2-Wire (120V ONLY) ESS EcoSystem 5-Series 5% LHE EcoSystem Hi-lum 1% Fade to Black LAE Lutron 3-Wire Hi-Lume 1% A Analog ED EldoLED DALI EA EldoLED Analog Copyright 2014 Lucent Lighting Inc. Tel. New York: +1 518 239 8300 Page 02
Issue Date: January 2017 Fixture/Location Ref: Project Ref: ProSpex 3.5 Axis Axis Downlight The ProSpex 3.5 Axis forms part of our architecturally designed range of Trim and Trimless adjustable downlights. The range also includes two snoot variants, short tapered and long straight, available for many MR16 sized light sources including Lucent s own LED50 series of modules. 1.57 (40mm) diameter pinhole aperture Deep regressed lamp position for minimal glare Easy rotation and re-lamping White or Matte Black finishes finish as standard Family of matching products also available 35 tilt and 359 rotation Tapered or straight snoot options Flangeless 3.5 Axis Flangeless A200-LED-PC Mud-in kit for seamless flush finish Page 03
Photometric Diagrams LED50 ONE GEN2 LED51/2-930-12 LED51/2, 3000K, 12 LED51/2-930-24 LED51/2, 3000K, 24 LED51/2-930-38 LED51/2, 3000K, 38 Information* LED Type Cree COB Cree COB CCT 2700K 3000K Drive Current 350mA 350mA Power inc Driver 13.8W 13.8W Beam Angle 12 24 38 12 24 38 Source Lumens 1075 1084 1200 1014 1021 1085 Delivered Lumens 694 774 795 694 774 795 Intensisty cd 9818 4163 2488 9818 4163 2488 Efficacy lm/w 50 56 58 50 56 58 R9 56 56 56 57 57 57 TM30 90.8 90.8 90.8 90.3 90.3 90.3 Forward Volt 36V 36V CRI 90 CRI 90 CRI *Data correct at time of publishing LED Module Order Code: LED51/2 Lamp LED51/2 LED50 ONE CCT 927 90 CRI 2700K 930 90 CRI 3000K 940 90 CRI 4000K Beam 12 12 24 24 38 38 Page 04
Photometric Diagrams LED51SS-927-7 LED51SS, 2700K, 7 LED51SS-930-7 LED51SS, 3000K, 7 LED50 ONE Super Spot Information* LED Type XHP XHP CCT 3000K 3000K Drive Current 350mA 500mA Power inc Driver 4.75W 6.75W Beam Angle 7 7 Source Lumens 372 471 Delivered Lumens 310 397 Intensisty cd 12306 15765 Efficacy lm/w 65 59 R9 55 55 TM30 90.6 90.6 Forward Volt 11.5V 11.5V CRI 90 CRI 90 CRI *Data correct at time of publishing LED Module Order Code: LED51SS 7 Lamp LED51SS LED50 ONE Super Spot CCT 927 90 CRI 2700K 930 90 CRI 3000K Beam 7 7 Page 05
Photometric Diagrams LED50 GEN2 LED50/2-830-18 LED50 GEN2, 3000K, 18 LED50/2-830-22 LED50 GEN2, 3000K, 22 LED50/2-830-36 LED50 GEN2, 3000K, 36 Information* LED Type XP-E2 XP-E2 CCT 3000K 3000K Drive Current 350mA 500mA Power inc Driver 10W 14W Beam Angle 18 22 36 18 22 36 Source Lumens 882 910 807 1102 1133 1042 Delivered Lumens 662 702 484 849 900 620 Intensisty cd 9103 6846 1654 11671 8777 2120 Efficacy lm/w 66 70 48 61 64 44 R9 10.5 10.5 10.5 10.5 10.5 10.5 TM30 82.4 82.4 82.4 82.4 82.4 82.4 Forward Volt 27V 27V CRI 80 CRI 80 CRI *Data correct at time of publishing LED Module Order Code: LED50/2 Lamp LED50/2 LED50 GEN2 CCT 827 80 CRI 2700K 830 80 CRI 3000K 840 80 CRI 4000K Beam 18 18 22 22 36 36 Page 06
Photometric Diagrams LED50 PLUS GEN2 LED50PLUS/2-930-18 LED50 Plus GEN2, 3000K, 18 LED50PLUS/2-930-22 LED50 Plus GEN2, 3000K, 22 LED50PLUS/2-930-36 LED50 Plus GEN2, 3000K, 36 Information* LED Type XP-E2 XP-E2 CCT 3000K 3000K Drive Current 350mA 500mA Power inc Driver 10W 14W Beam Angle 18 22 36 18 22 36 Source Lumens 925 959 845 1250 1303 1135 Delivered Lumens 590 596 388 783 790 515 Intensisty cd 3548 3147 1077 4706 4174 1428 Efficacy lm/w 59 60 39 56 56 37 R9 62.2 62.2 62.2 62.2 62.2 62.2 TM30 91.2 91.2 91.2 91.2 91.2 91.2 Forward Volt 27V 27V CRI 90 CRI 90 CRI *Data correct at time of publishing LED Module Order Code: LED50PLUS/2 Lamp LED50PLUS/2 LED50 PLUS GEN2 CCT 927 90 CRI 2700K 930 90 CRI 3000K Beam 18 18 22 22 36 36 Page 07
Fixture Order Code: A200-LS Fixture A200-LS LED LED50/2 LED50/2-90 LED51/2 LED51SS Flange TL 3.5 Axis Long Snoot Downlight LED50 GEN2 LED50 GEN2 PLUS LED50 ONE GEN2 LED50 SuperSpot Flangeless Finish WH BK RAL White Black Special Color Ceiling Thickness 12 1/2 58 5/8 75 3/4 C Custom Media at LED (Blank) None Louvre LL45 Honeycomb Lens LLDF Solite LLFR Frosted LLLS Linear Spread LLHS Heavy Spread LLCC Warm Tone LLUV UV Page 08
Driver Information Manufacturer Driver Input Voltage Mains Frequency Dimming Range Output Power Efficacy Current Ambient Temp Harvard CLK33 0-10V 120-277VAC 47-63Hz 100%-1% 11-33W 85% 100-1050mA -25 C - 50 C EldoLED EldoLED DALI 120-277VAC 50-60Hz 100%-0% 30W 84% 200-1050mA -20 C - 50 C EldoLED EldoLED 0-10V 120-277VAC 50-60Hz 100%-0% 30W 84% 150-1400mA -20 C - 50 C Lutron Hi-Lume Phase 120VAC 50-60Hz 100%-1% 2-48W 79% 350-700mA -20 C - 50 C Harvard CL Standard 120-277VAC 47-63Hz N/A 9-33W 87% 350-1000mA -25 C - 40 C Lutron Hi-Lume EcoSystem 120-277VAC 50-60Hz 100%-1% 2-48W 81% 350-700mA -20 C - 50 C Emergency: EM Driver CP05 CP07 CP12 5 Watts 7 Watts 12 Watts CP05: Input Voltage Input Rating Output Voltage Range Output Current Output Power Power Factor Emergency Operation 120-277VAC, 50/60Hz 2.7 Watts (max) 10-60VDC Class 2 Compliant 0.5A (@10VDC) - 0.08A (@60VDC) 5 Watts 0.9 90 Minutes CP07: Input Voltage Input Rating Output Voltage Range Output Current Output Power Power Factor Emergency Operation 120-277VAC, 50/60Hz 3.5 Watts (max) 10-60VDC Class 2 Compliant 0.7A (@10VDC) - 0.12A (@60VDC) 7 Watts 0.9 90 Minutes CP12: Input Voltage Input Rating Output Voltage Range Output Current Output Power Power Factor Emergency Operation 120-277VAC, 50/60Hz 5.0 Watts (max) 10-60VDC Class 2 Compliant 1.2A (@10VDC) - 0.2A (@60VDC) 12 Watts 0.9 90 Minutes Page 09
Installation Instructions for 3.5 Axis Flangeless with Housing For Insulated and Non-Insulated Ceiling type installations! MAINS POWER TO BE SWITCHED OFF DURING INSTALLATION. C 1. Fixing of housing 2. Plasterboard installation Cutout (C): Ø4.17 (106mm) 3. Trimless mud in kit installtion 4. Mud in and allow to dry fully 5. Paint and allow to dry fully 6. Dropdown of power supply 7. Fixture wiring connection 8. Power supply re-installation 9. Safety wire connection 10. Align fixture with trimless kit and Install 11. Finished Installation Fixture Adjustment Instructions 1. Adjust rotation 2. Adjust tilt Page 10
Installation Instructions for 3.5 Axis Flangeless with Tray For Insulated and Non-Insulated Ceiling type installations! MAINS POWER TO BE SWITCHED OFF DURING INSTALLATION. C 1. Fixing of housing 2. Plasterboard installation Cutout (C): Ø4.17 (106mm) 3. Trimless mud in kit installtion 4. Mud in and allow to dry fully 5. Paint and allow to dry fully 6. Dropdown of power supply 7. Fixture wiring connection 8. Power supply re-installation 9. Safety wire connection 10. Align fixture with trimless kit and Install 11. Finished Installation Fixture Adjustment Instructions 1. Adjust rotation 2. Adjust tilt Page 11