Press Nuremberg, November 27, 2017 SPS IPC Drives 2017, Hall 11 Extensive additions to Sinamics G120 portfolio for optimum handling Sinamics G120 converter series in new frame size FSG Extended push-through heat sink variants for Power Module PM240-2 Intelligent Operator Panel IOP-2 for Sinamics G series with added functions Siemens is extending its portfolio of Sinamics G120 converters to include a new frame size, the FSG with voltage ranges from 380 to 480 volts (V) and from 500 to 690 V. This addition means that the innovative PM240-2 Power Modules now cover the entire power range up to 250 kilowatts (kw). The extremely compact design and standard integrated optional features such as integrated DC link reactor or integrated filter to achieve category C2, enable substantial space and cost savings in the control cabinet. The new frame size also allows cable lengths of up to 450 meters to be achieved without the need for additional options. Depending on the application, the Power Module can be configured individually to customer requirements using the correct control unit and matching components. The push-through heat sinks which allow most of the heat loss to dissipate outside the control cabinet are now also available in higher-powered variants up to 132 kw. These new push-through variants of the PM240-2 Power Module are available in the voltage ranges from 200 to 240V and from 380 to 480V. Like the basic Power Module, they come with a braking chopper as well as integrated DC link reactor, and can be individually combined with the most suitable control unit. The flat IOP-2 Intelligent Operator Panel from the Sinamics G series has also been provided with new functions. It now comes complete with a new wizard enabling simple configuration of the Ethernet-based field bus interface. In addition, to facilitate particularly easy configuration and selection, users are provided with a Siemens AG Communications Head: Clarissa Haller Werner-von-Siemens-Straße 1 80333 Munich Germany Reference number:pr2017110043dfen Page 1/5
quick overview of all the interface setting possibilities. Added to this is also a new support function for direct access to data such as general product information and documentation. When using the Industry Online Support App, communication with Customer Support has also been substantially simplified. Access is established using a two-dimensional code generated at the IOP-2, which can be scanned and evaluated using a mobile device such as a smartphone or tablet. The safety technology integrated in the Sinamics G120 converter as standard, such as STO (SIL 3, PL e, Cat.3), makes for simplified handling. The Sinamics G120 fulfills EMC category EN61800-3 to C2 across the entire size range, and forms a central element of TIA (Totally Integrated Automation) and IDS (Integrated Drive Systems). The modular design of the PM240-2 Power Modules in the Sinamics G120 series makes them ideally suited for a wide range of general machine engineering applications up to 250 kw. The PM240-2 Power Module with push-through technology is available both in the voltage range 3 AC with 200 to 240 V and in the power range 0.75 to 55 kw. Variants are also available in the voltage range 3 AC with 380 to 480 V and the power range 3 kw to 132 kw. The IOP-2 permits rapid commissioning, troubleshooting and intuitive operation of all the converters of the Sinamics G series. The IOP-2 with its extended functionality is compatible with Sinamics converter models G120, G120C, G120P, G110D, G120D, G110M and with Simatic ET 200pro FC-2. The Sinamics IOP-2 can be either plugged directly onto the converter s control unit, door mounted to enable operation from outside the control cabinet, or connected by IOP-handheld to enable mobile wired operation in difficult-to-access locations. Reference number:pr2017110043dfen Page 2/5
The new Sinamics G120 frame size FSG for the PM240-2 Power Module series extends the power range of the innovative Power Modules to 250 kw. For additional space savings in the control cabinet, the existing push-through variants of the Sinamis G120 PM240-2 series have been extended to include power ranges up to 132 kw. Reference number:pr2017110043dfen Page 3/5
Sinamics IOP-2, the new generation of the Intelligent Operator Panel for Sinamics G. Fast, simple configuration and support. This press release and press pictures are available at www.siemens.com/press/pr2017110043dfen For further information on Sinamics, please see www.siemens.com/sinamics For further information on Siemens at the SPS IPC Drives 2017, please see www.siemens.com/sps-ipc-drives and www.siemens.com/press/sps2017 Contact for journalists Katharina Lamsa Phone: +49 911 895-7975; E-mail: katharina.lamsa@siemens.com Follow us on Social Media: Twitter: www.twitter.com/mediaserviceind and www.twitter.com/siemens_press Blog: https://blogs.siemens.com/mediaservice-industries-en Reference number:pr2017110043dfen Page 4/5
Siemens AG (Berlin and Munich) is a global technology powerhouse that has stood for engineering excellence, innovation, quality, reliability and internationality for 170 years. The company is active around the globe, focusing on the areas of electrification, automation and digitalization. One of the world's largest producers of energy-efficient, resource-saving technologies, Siemens is a leading supplier of efficient power generation and power transmission solutions and a pioneer in infrastructure solutions as well as automation, drive and software solutions for industry. The company is also a leading provider of medical imaging equipment such as computed tomography and magnetic resonance imaging systems and a leader in laboratory diagnostics as well as clinical IT. In fiscal 2017, which ended on September 30, 2017, Siemens generated revenue of 83.0 billion and net income of 6.2 billion. At the end of September 2017, the company had around 372,000 employees worldwide. Further information is available on the Internet at www.siemens.com. Reference number:pr2017110043dfen Page 5/5