Alsident System 50 Flex Aluminium (AL) Antistatic (AS) Product Information
System 50 Flex General Information Product Specification Product Description System 50 Flex Aluminium/Antistatic The System 50 Aluminium Extraction Arm from ALSIDENT SYSTEM features a range of extraction arms with a special self-supporting flexible hose and an aluminium extractor tube. System 50 Flex is available in an aluminium version (AL) and an antistatic version (AS). System 50 Flex AS is made of anodised aluminium tubes and flexible joints in black, white or red polypropylene (PP). System 50 Flex AS is made of chromated aluminium tubes and flexible joints of conductive polypropylene (PP). The internal parts of both versions are made of stainless steel and the hose is made of conductive ABS plastic. System 50 Flex arms are available for mounting directly on table or table bracket. System 50 Flex AL is approved for use in ESD-areas according to IEC 61340-5-1 and is therefore delivered with an earthing wire with a 1MΩ resistance. Further information is available in Mounting Instructions on the extraction arm or under Technical Information on our website. System 50 Flex AS is also suitable where static electricity must be avoided and is available in lengths with a maximum horizontal range of 900 mm. 50 Flex GI 01
System 50 Flex General Information Product Specification Technical specifications Recommended Airflow: Normal: 65 m 3 /h Minimum: 45 m 3 /h Maximum: 85 m 3 /h Air temperature: Key to the signatures SYSTEM NO. 50 Flex VERSION AL AS -15 C - +90 C Material AL: Pipes Anodised aluminium (10 µ) Joints Polypropylene (PP) red, white or black Hose: Conductive ABS O-ring: Polyethylene (PE) Flange: Polypropylene (PP) red, white or black Ring: Polypropylene (PP) black Damper: Polyethylene (PE) Thumbscrew: Polypropylene (PP) black Threaded stay: Acid-proof stainless steel Spring: Acid-proof stainless steel Material AS: Pipes: Chromated aluminium Joint: Conductive polypropylene (PP) Hose: Conductive ABS O-ring: Polyethylene (PE) Flange: Conductive polypropylene (PP) Ring: Polypropylene (PP) black Damper: Polyethylene (PE) Thumbscrew: Polypropylene (PP) yellow Threaded stay: Acid-proof stainless steel Spring: Acid-proof stainless steel Abbr.: PP: Polypropylene Shatterproof and chemical resistant Technical Reports Technical Reports: PE: PETG: ABS: TCP: Aluminium Antistatic Polyethylene Polyethylene Therephthalat, Glycol-modified Transparent and resistant to solvents Acrylonitrile Butadiene Styrene Trivalent Chromium Passivation RoHS compatible surface tratment for aluminium Local Extraction for workplaces incl. all materials for mounting. All components RoHS-compatible according to the directive 2002/95/EF (RoHS). Capture Efficiency (Danish Technological Institute) ESD test report (DELTA) Download: www.alsident.com > Technical Support > Test Reports CHAPTER GI TM General Information Table Mounted PAGE NO. 01 50 Flex GI 02
System 50 Flex General Information Product Overview Table Mounted Aluminium Aluminium, no joint Aluminium,1 joint Aluminium, 2 joints No. of Joints L [mm] B [mm] C [mm] Weight app. [kg] Part No. Red Joints: White 0 600-150 0.7 50-1-23-4 -5-050 1 700-350 0.9 50-21-1-23 -4-5 -050 2 900 375 350 1,2 50-3721-1-23 -4-5 -050 Black 50 Flex GI 03
System 50 Flex General Information Product Overview Table mounted Antistatic Antistatic, no joint Antistatic,1 joint Antistatic,2 joints No. of joints L [mm] B [mm] C [mm] Weight app. [kg] 0 600-150 0.7 50-1-23-6 1 700-350 0.9 50-21-1-23-6 2 900 375 350 1.2 50-3721-1-23-6 Part No. 50 Flex GI 04
System 50 Flex General Information Accessories Overview Table Bracket Part no.: 2-5010 /-050 Used to mount System 50 Flex arms on tableside, which makes it removable. Made of white or black polyester powder coated steel. Other colours available on request Colour Used to connect System 50 Flex arms to ducting. Made of white or black Polypropylene (PP). Available in two sizes. Part No. White powder coated 2-5010 Black powder coated 2-5010-050 Reducers Reducing from/to White Black 63/50 mm 4-6350 4-6350-050 80/50 mm 4-8050 4-8050-050 50 Flex GI 05
System 50 Flex General Information Pressure Loss Pressure Loss Chart Tested by Danish Technological Institute A : No joint B : 1 joint C : 2 joints 50 Flex GI 06
System 50 Flex General Information Spareparts Joint with damper Aluminium Joint with damper 4-50-4 /-5 /-050 6 4 2.1 5 2 3 1.5 1 1.6 6 5 4 2.1 2 1.5 3 1 1.6 1.3 1.4 1.1 1.2 Antistatic Joint with damper 4-50-6 1.3 1.4 1.1 1.2 50 Flex GI 07
Spareparts List Joint with damper Pos. Version Joint Part No. A Aluminium 1-joint 4-50-23-5 B Aluminium 2-joint 4-50-5 C Antistatic 1-joint 4-50-23-6 D Antistatic 2-joint 4-50-6 Pos. Spare part No. Red White Black AS Description A B C D 1 4-5012-23-4 -5-050 -6 Joint, 12 mm (1-joint) 1 1 1 4-5012 -4-5 -050-6 Joint, 12 mm (2-joint) 1 1 1.1 5-75 Teflon Washer 1 1 1 1 1.2 5-75-5-6 Thumbscrew, 5 mm 1 1 1 1 1.3 5-75-4-6 Thumbscrew, 4 mm 1 1 1.4 5-5075 Wing for damper 1 1 1 1 1.5 800-4-50-0-6 Damper 1 1 1 1 1.6 5-12-411 Seegerring 1 1 1 1 2 4-505-0-4 -5-050 -6 Joint, 5 mm 1 1 1 1 2.1 5-75-4-6 Thumbscrew, 4 mm 1 1 1 1 3 5-72-5-6 O-ring 1 1 1 1 4 5-50-5-163 Threaded Stay 1 1 1 1 5 5-75 Teflon Washer 1 1 1 1 6 5-75-5-6 Thumbscrew, 5 mm 1 1 1 1 When ordering spare parts pos. 1 or 2 the underlying spare parts (1.1-1.6 or 2.1) are included. [pieces applied] 50 Flex GI 07 08
System 50 Flex Table Mounted (TM) Mounting Options Table Mounted Option Dimensions Directly on table: System 50 Flex Arm mounted directly on a table with flange screwed to table plate. Accessories: No brackets used. (All measurements in mm) MOUNTING INSTRUCTION On-line video or pdf www.alsident.com 50 Flex TM 01
System 50 Flex Table Mounted (TM) Mounting Options Table Mounted Option Dimensions (All measurements in mm) With table bracket System 50 Flex Extraction arm mounted on table side with a table bracket. Very functional option when impossible to mount directly on table or when a mobile installation is required. Accessories: Table Bracket, Part No. 2-5010 /-050 MOUNTING INSTRUCTION On-line video or pdf www.alsident.com 50 Flex TM 02
System 50 Flex Table Mounted (TM) Table Bracket Technical Description Part no.: 2-5010 /-050 Dimensions (All measurements in mm) Used to mount System 50 Flex Table Mounted arms on tableside. Removable for mobile installations. Made of white or black polyester powder coated steel. Other colours available on request. Colour Part No. White 2-5010 Black 2-5010-050 50 Flex TM 03
System 50 Flex Table Mounted (TM) Spare Parts (A) 50-21-1-23-4 /-5 /-050 (B) 50-21-1-23-6 10 8 1 (C) 50-3721-1-23-4 /-5 /-050 (D) 50-3721-1-23-6 10 8 6 5 7 4 50 Flex TM 04 3 2 9 7 6 1
System 50 Flex Table Mounted (TM) Spare Parts List Pos. Product No. Red White Black AS Joints A 50-21-1-23 -4-5 -050 1 joint B 50-21-1-23 -6 1 joint C D 50-3721-1-23 -4-5 -050 2 joint 50-3721-1-23 -6 2 joint Pos. Spare part No. Red White Black AS Description A B C D [Number of used parts] 1 3-5031-1- -4-5 -050-6 C-pipe TM 315 1 1 1 1 2 5-50-2-3-02 Spring TM, 3 mm (2 joints) 1 1 3 5-72-5-6 O-ring 1 1 4 3-5037-9- -4-5 -050-6 B-pipe 375 1 1 5 5-50-5-154 Threaded stay 154 1 1 6 5-75-5-6 Thumbscrew 2 2 7 5-75 Teflon washer 2 2 8 4-50-23-4 -5-050 -6 Joint with damper* (short) 1 1 8 4-50- -4-5 -050-6 Joint with damper* 1 1 9 4-505- -4-5 -050-6 Joint 1 1 10 50-23-500-4 -5-6 Hose, black 1 1 1 1 *) Spare parts List for Joint with damper see General Information Spareparts list for Joint with Damper, please quote: Part no. e.g. 50-3721-1-23-5 Description - B-pipe 375 Sparepart No. - 3-5037-2-9-5 Number - 1 pc. If you wish to customize the arm with a sparepart which is not a constituent part of the particular model, please contact your Alsident dealer. 50 Flex TM 05