ORIGINAL DÜPERTHAL innovative. reliable. international NEW: SAFETY without compromise! 9.7 active
innovative. reliable. international We present ourselves on the market with the slogan Safety without compromise!. We understand our customers problems and find the right solution. We set the highest standards for our safety cabinets and continuously subject them to the latest and highest test requirements: Solutions 1984 - GS certification of safety cabinets For more than 20 years, our safety cabinets have been tested by independent inspection agencies such as TÜV Süd according to the valid standards and legal regulations. DIN EN 14470-1 / DIN EN 14470-2 1994 - Introduction of quality management according to DIN EN ISO 9001 DÜPERTHAL introduced its quality management in 1994 and had the company certified to DIN EN ISO 9001. Due to our high quality standards, we guarantee consistent quality at the highest level. DIN EN ISO 9001 2006 - Additional testing according to the laboratory furniture standard DIN EN 14727 The requirements for minimum quality and durability standards of laboratory furniture were redefined in 2006 with publication of the new DIN EN 14727 standard. Here too we maintain a consistent approach and have also had our safety cabinets tested and certified according to the new standards. DIN EN 14470-1 / DIN EN 14470-2 / DIN EN 14727 Quality 2007 - Awarded the High Quality mark of approval With our safety cabinets we offer top quality combined with safety and convenience. This claim is motivation to have our safety cabinets tested to higher criteria than those required by the valid standards. In particular, TÜV Süd tested and evaluated the product design, user friendliness, durability and product quality. All tested models not only fulfil the requirements of the valid standards as well as the equipment and product safety legislation, but also provide added quality and convenience. TÜV Süd has therefore awarded its High Quality mark to DÜPERTHAL for its safety cabinets, the first manufacturer world wide to receive it. Safety High Quality - quality mark Fire protection. Environmental protection. Working safety
PREMIUM LINE Type 90 PREMIUM line Safety cabinets with -hand folding doors technology
PREMIUM with -hand folding door technology Fire resistance (FR) of 90 minutes. Safety cabinets with easy moving, -hand folding doors technology and pull-out trays for the storage of hazardous substances in working spaces according to TRbF 20 Annex L. XL Type 90 in detail ORIGINAL DÜPERTHAL PREMIUM line NEW: One-hand folding door technology The new technology offers maximum ease of use. Tested safety at a high level including: Tested safety at a high level including: - Safety cabinet type tested to DIN EN 14470-1 by recognised test institutes (TÜV Süd, ift Rosenheim). - TÜV-tested to DIN EN 14727 (laboratory furniture standard). - Classification type 90 in accordance with DIN EN 14470-1. Ventilation at every cabinet level, ability to visually check the venting cut-off flaps. Decidedly easy moving folding doors can be simultaneously opened with minimum effort and a handle. - GS/CE mark. Construction: - Folding doors, sheet steel, powdercoated. - Outer carcass sheet steel, powdercoated. - Inner carcass made from high-quality decor panels. Smooth cabinet surfaces, no protruding hinges or covers. Ergonomic lock positioning at handle (working) height and lock system compatible lock cylinder integrated in the door. Interior fittings: - Pull-out trays made of powdercoated sheet steel or stainless steel. - Further interior fittings on request. Colour: - Folding doors optionally in zinc yellow RAL 1018 or light grey RAL 7035. - Complete carcass in light grey RAL 7035. - Individual colour wishes possible. Optimized bearing surface by massive adjusting base. Easy alignment and level adjustment from the inside and outside. Base set back to prevent people from hitting their feet on it. Standard equipotential bonding saddle on the roof of the cabinet for connecting to the earthing according to BGR 132 (avoiding ignition hazards). The interior fittings are conductively connected with the equipotential bonding saddle. Space-saving folding doors remain open, containers can therefore be placed in the cabinet and removed with both hands. In case of a fire a thermocouple initiates closing of the doors. 41 Mainparkstr. 6-10, 63801 Kleinostheim, Deutschland Fon +49 6027 403-0 Fax +49 6027 403-121 Mainparkstr. 6-10, 63801 Kleinostheim, Deutschland Fon + 49 6027 403-0 5 Fax + 49 6027 403-121
PREMIUM XL - Safety cabinet Type 90 Original DÜPERTHAL premium line PREMIUM XL 14470-1 14727 L A B O R A T O R Y F U R N I T U R E S TA N D A R D 1.2 PREMIUM XL - Version XL 2 PREMIUM XL - Version XL 2 with: 4 pull-out trays V*, 1 pull-out tray E** and base Ref. no. - Interior fittings, sheet steel 29-201264-062 - Interior fittings, stainless steel 29-201264-082 EN Dimensions and weight Outer Inner Width 1195 1099 Depth 595 446 Height 2080 1830 Weight in kg 475 Accessories Material Width Depth Height Ref. no. For further technical details, see page 7. - Glassbottle rack for 10 bottles with Ø 150 mm - Glassbottle rack for 24 bottles with Ø 90 mm Sheet steel 855 405 60 29-81262-135 Sheet steel 855 405 60 29-81262-134 - Tray insert V* PP 855 405 60 29-81262-362 - Tray insert E** PP 855 405 124 29-81262-363 - Absorbent cloths (50 cloths per pack) 1085 425 29-81260-614 - Anti-slip mat Rubber 855 405 29-81262-562 - Pipe penetration for max. 4 x Ø 20 x 1 mm stainless steel pipe 29-70000-045 - Extraction systems see page 15 Max. storage capacity/standing surface Please note the possible adjustable heights on page 7. Quantity Type of container Size 77 Spray can 400 ml 29 Tin 1 litre 35 Glass lab. bottle 1 litre 14 Glass lab. bottle 2.5 litre *V = supply, **E = disposal Accessories PP tray insert Anti-slip mat Glassbottle rack Extraction systems - see page 15. Absorbent cloths Mainparkstr. 6-10, 63801 Kleinostheim, Germany Ph + 49 6027 403-0 Fax + 49 6027 403-121
Technical specifications - PREMIUM SL safety cabinets Dimensions - interior fittings: Model size XL Width Depth Height Pull-out tray V* 862 410 60 Pull-out tray E** 862 410 124 Adjustable heights : 5 pull-out trays V* V* V* V* E** Container heights: 0.5 Litre bottle 195 mm 1.0 Litre bottle 235 mm 2.5 Litre bottle 265 mm 12.0 Litre combi-container 345 mm 12.0 Litre combi-container with high funnel 490 mm *V = Supply (for small containers, 0.5-2.5 litres). **E = Disposal (for larger containers, e.g. 10 litre disposal containers). Technical details: Model size XL Load-bearing capacity for uniformly distributed load (maximum loadability/shelf) in kg Pull-put tray V* (supply H = 60 mm) 60 Pull-out tray E** (disposal H = 124 mm) 60 Maximum volume of the largest individual container, which may be stored in the cabinet in l Pull-put tray V* (supply H = 60 mm) 19 Pull-out tray E** (disposal H = 124 mm) 39 Collection volume in l Pull-put tray V* (supply H = 60 mm) 21 Pull-out tray E** (disposal H = 124 mm) 43 Volumetric flow rate for 10-fold air exchange in approx m³/h 10 Pressure drop in the cabinet in Pa. <1 Front view Side view Top view PREMIUM XL Exhaust Air supply Connection socket NW 75 Mainparkstr. 6-10, 63801 Kleinostheim, Germany Ph + 49 6027 403-0 7 Fax + 49 6027 403-121
Classic line Classic line Type 90 CLASSIC line Safety cabinets with wing doors CLASSIC line Type 90 Safety cabinets with -hand wing door technology 8 9
CLASSIC with -hand wing door technology XS CLASSIC XS with wing doors Type 90 Type 90 Fire resistance (FR) of 90 minutes. Safety cabinets with easy moving, -hand wing door technology and shelves for the storage of hazardous substances in working spaces in accordance with TRbF 20 Annex L. in detail Tested safety at a high level including: Tested safety at a high level including: - Type testing according to DIN EN 14470-1 by recognised test institutes (TÜV Süd, ibmb Braunschweig). - TÜV-tested to DIN EN 14727 (laboratory furniture standard). - Classification Type 90 in accordance with DIN EN 14470-1. - GS/CE mark. Smooth cabinet surfaces, no protruding hinges or covers. Ventilation at every cabinet level, ability to visually check the venting cut-off flaps. Doors remain open in virtually every position, meaning that containers can be placed in and removed from the cabinet with both hands. In case of fire, the thermocouple initiates the closing of the door. Standard equipotential bonding saddle on the roof of the cabinet for connecting to the earthing in accordance with BGR 132 (avoiding ignition hazards). The interior fittings are conductively connected with the equipotential bonding saddle. Construction: - Wing doors, sheet steel, powdercoated. - Outer carcass, sheet steel, powdercoated. - Inner carcass made from high-quality decor panels. Interior fittings: - Shelves made from powder-coated sheet steel or stainless steel. - Further interior fittings on request. Variable height adjustment of the shelves within the 32 mm grid. Shelves stably mounted on adjustable supports, protected against tilting and being pulled out. Ergonomic lock positioning at handle (working) height and lock system compatible lock cylinder integrated in the door. One-handed operation of the easy-moving doors - more details about CLASSIC XS see page 12. Colour: - Wing doors optionally in zinc yellow RAL 1018 or light grey RAL 7035. - Complete carcass in light grey RAL 7035. - Individual colour wishes possible. Base set back to prevent people from hitting their feet on it. Optimized bearing surface by massive adjusting base. Easy alignment and level adjustment from the inside and outside. Cabinet with accessible base. 10 1 Mainparkstr. 6-10, 63801 Kleinostheim, Deutschland Fon +49 6027 403-0 Fax +49 6027 403-121 Mainparkstr. 6-10, 63801 Kleinostheim, Deutschland Fon + 49 6027 403-0 11 Fax + 49 6027 403-121
CLASSIC XS Type 90 NEW: One-hand wing door technology The new technology offers maximum ease of use. Decidedly easy moving wing doors can be simultaneously opened with minimum effort and a handle. Accessories included PP insert for shelves Anti-slip mat Pipe penetration Extraction systems - see page 15 Absorbent cloths 12 Mainparkstr. 6-10, 63801 Kleinostheim, Germany Ph + 49 6027 403-0 Fax + 49 6027 403-121
CLASSIC XS - Safety cabinet Type 90 Original DÜPERTHAL Classic line CLASSIC XS Version XS 1 14470-1 CLASSIC XS Version XS 1 14727 L A B O R A T O R Y F U R N I T U R E S TA N D A R D 1.1.1 CLASSIC XS - Version XS 1 CLASSIC XS - Version XS 1 with: 2 shelves, 1 bottom tray, 1 perforated sheet insert and base, New: incl. 2 absorbent cloths Ref. no. - Interior fittings, sheet steel 29-131261-021 - Interior fittings, stainless steel 29-131261-041 Accessories Material Width Depth Height Ref. no. - Shelf Sheet steel 1090 430 35 29-81260-114 - Shelf Stainless steel 1090 430 35 29-81260-214 - Insert for shelf PP 1080 425 35 29-81260-314 - Anti-slip mat Rubber 1085 425 29-81260-514 - Absorbent cloth (50 per pack) 1085 425 29-81260-614 - Locker (door hung left) 420 365 395 29-70000-036 - Locker (door hung right) 420 365 395 29-70000-037 - Pipe penetration for max. 4 x Ø 20 x 1 mm stainless steel pipe 29-70000-045 - Extraction systems see page 15 EN Dimensions and weight Outer Inner Width 1195 1099 Depth 595 446 Height 1425 1175 Weight in kg 400 For further technical details, see page 14. Max. storage capacity/standing surface Quantity Type of container Size 105 Spray can 400 ml 38 Tin 1 Liter 45 Glass lab. bottle 1 Liter 19 Glass lab. bottle 2,5 Liter 1.1.2 CLASSIC XS - Version XS 1 CLASSIC XS - Version XS 1 with: 2 shelves, 1 bottom tray, 1 perforated sheet insert and base, New: incl. 2 absorbent cloths Ref. no. - Interior fittings, sheet steel 29-131263-001 - Interior fittings, stainless steel 29-131263-002 Accessories Material Width Depth Height Ref. no. - Shelf Sheet steel 1090 430 35 29-81260-114 - Shelf Stainless steel 1090 430 35 29-81260-214 - Insert for shelf PP 1080 425 35 29-81260-314 - Anti-slip mat Rubber 1085 425 29-81260-514 - Absorbent cloth (50 per pack) 1085 425 29-81260-614 - Locker (door hung left) 420 365 395 29-70000-036 - Locker (door hung right) 420 365 395 29-70000-037 - Pipe penetration for max. 4 x Ø 20 x 1 mm stainless steel pipe 29-70000-045 - Extraction systems see page 15 EN Dimensions and weight Outer Inner Width 1195 1099 Depth 595 446 Height 1425 1175 Weight in kg 400 For further technical details, see page 14. Max. storage capacity/standing surface Quantity Type of container Size 105 Spray can 400 ml 38 Tin 1 Liter 45 Glass lab. bottle 1 Liter 19 Glass lab. bottle 2,5 Liter Mainparkstr. 6-10, 63801 Kleinostheim, Germany Ph + 49 6027 403-0 13 Fax + 49 6027 403-121
Technical specifications - CLASSIC Standard safety cabinets Dimensions - interior fittings: Model size XS Width Depth Height Shelf 1090 430 35 Bottom tray 1085 440 105 Technical details: Model size XS Load bearing capacity with uniformly distributed load (maximum loadability/shelf) Maximum volume of the largest individual container which may be stored in the cabinet in kg 75 in l 43 Collection volume of the bottom tray in l 48 Volumetric flow rate for 10-fold air exchange in approx. m³/h 0,6 Pressure drop in the cabinet in Pa. <1 Front view Side view Top view CLASSIC XS Exhaust Air supply Connection socket NW 75 CLASSIC XS Exhaust Air supply Connection socket NW 75 14 Mainparkstr. 6-10, 63801 Kleinostheim, Germany Ph + 49 6027 403-0 Fax + 49 6027 403-121
Extraction systems ATEX-compliant extraction systems with or without monitoring function. Easy to assemble because ready to plug-in. The air box is made from powder-coated sheet steel RAL 7035 (light grey). Easy to assemble. Supplied ready to plug-in. ATEX-compliant. Ventilators according to DIN EN 14986. 4.1.1 Exhaust air monitor with ventilator - Model 2.00.315 For ventilation and monitoring the ventilation of safety cabinets. Air flow sensor monitors the actual air flow speed - the complete venting system of the cabinet is monitored. Optical and acoustic warning should the preset speed fall short. Two floating contacts (24V/2A) for signal transmission to an external control room. Internal storage accumulator supplies the monitoring systems for 2 hours in the event of a power failure. Differential pressure switch. Virtually maintenance free. Exhaust air monitor with ventilator - Model 2.00.315 4.1.2 Exhaust air monitor without ventilator - Model 2.00.355 For monitoring the (on site) ventilation of safety cabinets. Further information - see modells 2.00.315, search no. 4.1.1. 4.1.3 Ventilation units with ventilator - Models 2.00.335/2.00.336 Exhaust air monitor without ventilator - Model 2.00.355 Ventilation units with integrated ventilator. The ventilation units are supplied without a monitoring function for the exhaust air. Ordering information/dimensions Width mm 320 250 320 320 Depth mm 290 100 290 290 Height mm 270 160 270 270 Ø -collar mm 75 75 75 75 Voltage/frequency V/Hz 230/50 230/50 230/50 230/50 Noise level Lp5A db(a) 3m/34-3m/34 3m/27 Ref. no. 2.00.315 2.00.355 2.00.335 2.00.336 Ventilation unit with ventilator - Models 2.00.335 and 2.00.336 Technical information Characteristics - Extraction systems model 2.00.315, 2.00.355 and 2.00.336: 1. Check extraction system immediately after delivery for any possible damage. 2. The extraction systems are to be fitted as near as possible to the exhaust exit. 3. Assemble on a flat, even surface. 4. The connections with intake and exhaust vents are to be made using elastic collars. 5. Housing and impeller are virtually maintenance free. To avoid the ventilator becoming unbalanced, remove dirt and any build-up of waste materials at regular intervals. 6. The floating contacts are to be connected by an authorised specialist. The electric diagram is located directly on the ventilator and in the operating instructions. Characteristics DÜPERTHAL-extraction systems 2.00.336 2.00.315/2.00.335 Mainparkstr. 6-10, 63801 Kleinostheim, Germany Ph + 49 6027 403-0 15 Fax + 49 6027 403-121
Fire protection. Environmental protection. Working safety Visit our new Website Mainparkstrasse 6-10. 63801 Kleinostheim. Germany copyright by DÜPERTHAL All rights reserved. No part of this document may be reproduced. Civil action will be taken against infringements. We reserve the right to increase prices and make technical changes through improvements and further development and to update the document accordingly in response to standardisation. We do not accept any liability whatsoever for printing errors. Slight colour differences in the illustrated products are possible due to printing. DÜPERTHAL_ab/en_Rev0
All for ONE ONE for all: The CLASSIC ONE XL combines maximum user convenience with quality Laboratory equipment such as safety cabinets must satisfy high health & safety and environmental protection standards. The requirements of the laboratory owners and users are therefore clearly defined: Safety for man and the environment, permanent availability, low follow-up costs, high functional capability and good convenience & comfort. DÜPERTHAL's safety cabinets offer a fundamental solution for the storage of flammable liquids combined with optimum convenience for the user. Each safety cabinet for flammable liquids must fulfil all legal regulations before it is approved for the market. It must comply with the Equipment and Product Safety Law (GPSG) as well as the DIN EN 14470-1 standard "Fire Resistant Storage Cabinets, Part 1: Safety Cabinets for Flammable Liquids". Part of this DIN EN 14470-1 includes fire chamber tests according to which recognised test institutes determine the fire resistance of the individual safety cabinets. With the European laboratory furniture standard DIN EN 14727, a further mandatory programme exists for the compliance of laboratory equipment quality characteristics, which has been taken into account by DÜPERTHAL since the laboratory furniture standard was introduced. The laboratory furniture standard defines the requirements for cabinets used in laboratories and checks focal topics such as strengths, durability and the quality of products and therefore their permanent safety. High quality in the laboratory The High Quality Seal from TÜV Süd provides good orientation for laboratory users who also require a high degree of convenience and economic use. It signals that the product properties extend beyond the legal regulations as well as the requirements of the standards. In addition to this, the product also convinces with high-quality features and fittings, particularly good user-friendliness and an extended life. TÜV Süd also demands that the company concerned works with a quality management system, e.g. ISO 9001, because this guarantees the "continuous improvement process", i.e. continuous further development of the products. Regular inspections of the production facilities by TÜV Süd support permanent fulfilment of the high quality seal standards, including: - Existence of incoming goods inspection of raw materials as well as their documentation - existing delivery mechanisms, including with respect to faulty supplier parts and materials - Existing training and further training of employees - Comparison between the actual production of the cabinets and the approved type drawing - Sequences in outgoing goods control. The CLASSIC ONE XL hazardous materials cabinet with Type 90 classification in accordance with DIN EN 14470-1 has successfully passed the type test according to DIN EN 14470-1 by recognised test institutes (TÜV Süd, ibmb Braunschweig) and conformity with the laboratory furniture standard DIN EN 14727 was confirmed. However, the CLASSIC ONE XL not only fulfils the requirements of the valid standards as well as the Equipment and Product Safety Law, but also provides added quality and convenience. Therefore, TÜV Süd has awarded the CLASSIC ONE XL the High Quality Seal. The CLASSIC ONE XL not only convinces users through its high safety standards but also its user friendliness. New: Single hand wing door technology The new CLASSIC ONE XL technology offers maximum user convenience. The decidedly easy moving wing doors can be opened simultaneously with a single hand and minimum effort. In the event of a fire, they are automatically closed. A thermo-element initiates the door-closing. The ingenious design prevents containers from being tipped over when the doors close.
Superior design: Harmful vapours are extracted at every level in the CLASSIC ONE XL and not only above the bottom tray. Visual signals in the safety cabinet make it easy to recognise that the CLASSIC ONE XL's ventilation is functioning properly: If the ventilation cut-off flaps are green they are open and ventilation is possible. The ventilation is interrupted, i.e. closed, if the ventilation cut-off flaps are red. Due to the self-weight of a safety cabinet, the cabinet feet of the CLASSIC ONE XL are very robust to ensure safe transport. The cabinet feet are also adjustable, so that any unevenness in the floor can be levelled out. The matching base is offset towards the back to prevent people from hitting their feet on it. User friendly: Due to the single hand wing door technique of the CLASSIC ONE XL, the user can conveniently open both doors of the safety cabinet simultaneously with hand only, without having to put down the flammable liquids. The ergonomic lock positioning for easy access and the integrated lock cylinder in the door, compatible with lock systems, make closing and locking the safety cabinet even easier and safer. The standard Equipotential bonding tab on the top of the cabinet for connection to the earthing according to BGR 132 prevents danger of ignition. The interior fittings are conductively connected to the Equipotential bonding tab. The operating instructions for the CLASSIC ONE XL are complete, easy to understand and enable the user to immediately and safely use the safety cabinet and its features. Increased life: The resistance of safety cabinets is defined by the laboratory furniture standard DIN EN 14727: it specifies that rotating, wing or folding doors as well as drawers, pull-out elements and pullout trays can definitely withstand a minimum of 50,000 movement cycles (outward and return). During testing the CLASSIC ONE XL even withstood 80,000 movement cycles. Yet another reason why the CLASSIC ONE XL was awarded the High Quality Seal. Further information is available from: DÜPERTHAL Sicherheitstechnik GmbH & Co. KG Mainparkstraße 6-10 63801 Kleinostheim Tel +49 6027 403 0 Fax +49 6027 403 177 marketing@dueperthal.com Image 1.) High Quality Seal DÜPERTHAL was the first manufacturer of safety cabinets to receive the "High Quality Seal". Image 2.) TÜV Süd Mark The mark of tested safety according to the Equipment and Product Safety Law (GPSG) and the guarantee that all criteria of the valid standards, such as DIN EN 14470-1 and DIN EN 14727, are fulfilled.
Image 3., 4.) CLASSIC One XL CLASSIC line cabinets awarded the "High Quality Seal" are used in industry and in laboratories. Image 5.) Technical Ventilation Ventilation and extraction at every cabinet level and visual checking option of the ventilation cutoff flaps. Image 6.) transport When it is empty, the safety cabinet can be accessed from underneath and can therefore be flexibly used. Image 7.) Base The base is offset towards the back to prevent people from hitting their feet on it. Image 8.) Doorway The easy moving doors can be opened with hand. Image 9.) Earthing The interior fittings are conductively connected to the equipotential bonding tab to prevent the danger of ignition according to BGR 132. Image 10.) Lock cylinder The lock cylinder is integrated in a good ergonomic position for easy access.